sim/microblaze/ChangeLog

   1 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * config.in, configure: Regenerate.
   4
   5 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
   8
   9 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * interp.c (sim_close): Delete.
  12
  13 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  14
  15         * configure: Regenerate.
  16
  17 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  18
  19         * configure: Regenerate.
  20
  21 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  22
  23         * configure: Regenerate.
  24
  25 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * Makefile.in (SIM_OBJS): Add sim-resume.o.
  28         * interp.c (sim_resume): rename to ...
  29         (sim_engine_run): ... this.  Change CPU.exception setting to
  30         sim_engine_halt calls.  Change do/while to while(1).  Call
  31         sim_events_process when sim_events_tick is true.
  32         (sim_stop_reason): Delete.
  33         * sim-main.h (microblaze_regset): Delete exception member.
  34
  35 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * sim-main.h (SIM_CPU): Delete.
  38
  39 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  40
  41         * sim-main.h (sim_cia): Delete.
  42
  43 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  44
  45         * interp.c (issue_messages, wbat, wlat, what, rbat, rlat, rhat,
  46         sim_memory_size, MEM_SIZE_FLOOR, sim_size, init_pointers, sim_write,
  47         sim_read, sim_do_command): Delete.
  48         (set_initial_gprs): Delete memsize and call to init_pointers.
  49         (sim_resume): Change rlat to MEM_RD_WORD.  Change issue_messages to
  50         STATE_VERBOSE_P.
  51         (sim_store_register, sim_fetch_register): Drop call to init_pointers.
  52         (sim_open): Drop issue_messages setup.  Delete osize and call to
  53         sim_size.  Call sim_do_commandf to set the memory size.
  54         * microblaze.h (MEM): Delete.
  55         (MEM_RD_BYTE): Change rbat to sim_core_read_1.
  56         (MEM_RD_HALF): Change rhat to sim_core_read_2.
  57         (MEM_RD_WORD): Change rlat to sim_core_read_4.
  58         (MEM_WR_BYTE): Change wbat to sim_core_write_1.
  59         (MEM_WR_HALF): Change what to sim_core_write_2.
  60         (MEM_WR_WORD): Change wlat to sim_core_write_4.
  61         * sim-main.h (microblaze_regset): Delete msize and memory.
  62
  63 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  64
  65         * sim-main.h (CIA_GET, CIA_SET): Delete.
  66
  67 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  68
  69         * interp.c (microblaze_pc_get, microblaze_pc_set): New functions.
  70         (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
  71
  72 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
  73
  74         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
  75         * sim-main.h (STATE_CPU): Delete.
  76
  77 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
  78
  79         * configure: Regenerate.
  80
  81 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
  82
  83         * Makefile.in (SIM_OBJS): Delete sim-engine.o.
  84
  85 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
  86
  87         * config.in, configure: Regenerate.
  88
  89 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
  90
  91         * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS, SIM_EXTRA_LIBS): Delete.
  92         (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
  93         * interp.c: Drop sys/times.h, sys/param.h, run-sim.h, and sim-utils.h
  94         includes.
  95         (target_big_endian): Replace with CURRENT_TARGET_BYTE_ORDER.
  96         (callback, microblaze_state, sim_kind, myname, sim_trace, sim_stop,
  97         sim_load, sim_set_callbacks, sim_complete_command): Delete.
  98         (wbat, wlat, what, rbat, rlat, rhat): Add SIM_CPU* as first arg.
  99         (sim_size): Mark static and add SIM_CPU* as first arg.
 100         (init_pointers): Add SIM_CPU* as first arg and pass to sim_size.
 101         (set_initial_gprs): Add SIM_CPU* as first arg and pass to init_pointers.
 102         (sim_resume): Add local cpu variable.  Pass it to rlat.
 103         (sim_write, sim_read, sim_store_register, sim_fetch_register): Add local
 104         cpu variable.  Pass it to init_pointers.
 105         (sim_stop_reason, sim_do_command): Add local cpu variable.
 106         (sim_info): Add local cpu and callback variables.
 107         (free_state): New cleanup function.
 108         (sim_open): Rewrite to use new common logic.
 109         (sim_close): Delete body.
 110         (sim_create_inferior): Delete call to set_initial_gprs.
 111         * microblaze.h (CPU): Redefine using cpu.
 112         (MEM_RD_BYTE, MEM_RD_HALF, MEM_RD_WORD, MEM_WR_BYTE, MEM_WR_HALF,
 113         MEM_WR_WORD): Pass in cpu as first arg.
 114         * sim-main.h (CIA_GET, CIA_SET, SIM_CPU): Define.
 115         (MAX_NR_PROCESSORS): Delete.
 116         (struct sim_state): Change cpu to *cpu, and rewrite STATE_CPU.
 117
 118 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * interp.c (NUM_ELEM, heap_ptr, stack_ptr, memcycles, struct aout,
 121         LONG, SHORT): Delete.
 122         [WATCHFUNCTIONS]: Delete.
 123         (sim_info) [WATCHFUNCTIONS]: Delete.
 124         (sim_create_inferior): Delete avp, nargs, nenv, s_length, strings,
 125         pointers, and hi_stack.
 126         (sim_do_command): Delete the "watch" command.
 127
 128 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * interp.c (sim_load): Set verbose to 0 when calling sim_load_file.
 131
 132 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
 135         SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
 136         SIM_AC_OPTION_INLINE.
 137         * config.in, configure: Regenerate.
 138
 139 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 140
 141         * interp.c: Strip trailing whitespace.
 142
 143 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 144
 145         * configure.ac: Call SIM_AC_OPTION_WARNINGS.
 146         * confingure: Regenerate.
 147         * interp.c: Include run-sim.h.
 148         (microblaze_extract_unsigned_integer): Mark static.
 149         (microblaze_store_unsigned_integer): Likewise.
 150         (int_sbrk, SEXTB, SEXTW, IOMEM): Delete.
 151         (init_pointers, set_initial_gprs): Add (void) to prototype.
 152         (opened, log_open, log_close, is_opened, handle_trap1, process_stub,
 153         util, iu_carry): Delete.
 154
 155 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * config.in, configure: Regenerate.
 158
 159 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * Makefile.in (SIM_EXTRA_CFLAGS): Set to
 162         -DSIM_USE_DEPRECATED_RUN_FRONTEND.
 163         (SIM_RUN_OBJS): Set to run.o.
 164         (SIM_EXTRA_CLEAN): Delete.
 165         (interp.o, microblaze-clean): Delete rules.
 166
 167 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 168
 169         * configure.ac (AC_CHECK_HEADERS): Delete.
 170         * aclocal.m4, configure: Regenerate.
 171
 172 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 173
 174         * interp.c (microblaze_extract_unsigned_integer): Change %ld to %zu.
 175
 176 2015-02-20  Mike Frysinger  <vapier@gentoo.org>
 177
 178         * interp.c: Delete sysdep.h and netinet/in.h includes.
 179         Include stdlib.h and string.h and unistd.h.
 180         * sysdep.h: Delete.
 181
 182 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 183
 184         * interp.c (sim_kill): Delete unused func.
 185
 186 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 187
 188         * microblaze.isa: Add "microblaze_" prefix to "or", "and", and "xor".
 189
 190 2015-02-02  Chen Gang  <gang.chen.5i5j@gmail.com>
 191
 192         * interp.c (sim_do_command): Call freeargv() before return.
 193
 194 2014-07-01  Chen Gang  <gang.chen.5i5j@gmail.com>
 195
 196         * interp.c: Use long int format instead of int format.
 197
 198 2014-08-19  Alan Modra  <amodra@gmail.com>
 199
 200         * configure: Regenerate.
 201
 202 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 203
 204         * configure: Regenerate.
 205         * config.in: Regenerate.
 206
 207 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * interp.c (sim_do_command): Add const to cmd.
 210
 211 2014-03-05  Mike Frysinger  <vapier@gentoo.org>
 212
 213         * interp.c (sim_load): Add const to prog.
 214
 215 2014-02-17  Mike Frysinger  <vapier@gentoo.org>
 216
 217         PR gdb/16450
 218         * interp.c (interrupt): Delete.
 219         (sim_resume): Delete signal(SIGINT) handling.
 220
 221 2013-09-23  Alan Modra  <amodra@gmail.com>
 222
 223         * configure: Regenerate.
 224
 225 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * aclocal.m4, configure: Regenerate.
 228
 229 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 230
 231         * config.in, configure: Regenerate.
 232
 233 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 234
 235         * aclocal.m4, config.in, configure: Regenerate.
 236
 237 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * aclocal.m4: New file.
 240         * configure: Regenerate.
 241
 242 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 243
 244         * configure.ac: Change include to common/acinclude.m4.
 245
 246 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 247
 248         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 249         call.  Replace common.m4 include with SIM_AC_COMMON.
 250         * configure: Regenerate.
 251
 252 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * interp.c (sim_complete_command): New stub function.
 255
 256 2010-04-14  Mike Frysinger  <vapier@gentoo.org>
 257
 258         * interp.c (sim_write): Add const to buffer arg.