sim/mn10300/ChangeLog

   1 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure: Regenerate.
   4
   5 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
   8
   9 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * config.in, configure: Regenerate.
  12         * interp.c, op_utils.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
  13         HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include.
  14
  15 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  16
  17         * configure: Regenerate.
  18
  19 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  20
  21         * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
  22         * configure: Regenerate.
  23
  24 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * configure: Regenerate.
  27
  28 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
  29
  30         * configure: Regenerate.
  31
  32 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  33
  34         * configure: Regenerate.
  35
  36 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  37
  38         * config.in, configure: Regenerate.
  39
  40 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  41
  42         * configure: Regenerate.
  43
  44 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  45
  46         * configure: Regenerate.
  47
  48 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  49
  50         * configure: Regenerate.
  51
  52 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  53
  54         * configure: Regenerate.
  55
  56 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  57
  58         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
  59         * configure: Regenerate.
  60
  61 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  62
  63         * configure: Regenerate.
  64
  65 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  66
  67         * configure: Regenerate.
  68
  69 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
  70
  71         * config.in, configure: Regenerate.
  72
  73 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
  74
  75         * interp.c (sim_open): Mark argv const.
  76         (sim_create_inferior): Mark argv and env const.
  77
  78 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
  79
  80         * configure: Regenerate.
  81
  82 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
  83
  84         * interp.c (sim_open): Update sim_parse_args comment.
  85
  86 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
  87
  88         * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
  89         * configure: Regenerate.
  90
  91 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
  92
  93         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
  94         LITTLE.
  95         * configure: Regenerate.
  96
  97 2015-12-30  Mike Frysinger  <vapier@gentoo.org>
  98
  99         * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define.
 100         (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
 101         (sim_store_register): Rename to ...
 102         (mn10300_reg_store): ... this.
 103         (sim_fetch_register): Rename to ...
 104         (mn10300_reg_fetch): ... this.
 105
 106 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 107
 108         * Makefile.in (MN10300_OBJS): Delete sim-hload.o.
 109
 110 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * config.in, configure: Regenerate.
 113
 114 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * sim-main.h (SIM_HANDLES_LMA): Delete.
 117
 118 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * sim-main.h (WITH_WATCHPOINTS): Delete.
 121
 122 2015-11-21  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * interp.c (mn10300_callback): Delete.
 125         (sim_open): Delete mn10300_callback assignment.
 126         (program_interrupt): Call sim_io_printf.
 127         * mn10300_sim.h (mn10300_callback): Delete.
 128
 129 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
 130
 131         * sim-main.h (WITH_CORE): Delete.
 132
 133 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
 136
 137 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * interp.c (sim_close): Delete.
 140
 141 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * configure: Regenerate.
 144
 145 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 146
 147         * op_utils.c (do_syscall): Replace call to cb_syscall with
 148         sim_syscall_multi.
 149
 150 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 151
 152         * mn10300_sim.h (syscall_read_mem, syscall_write_mem): Delete.
 153         * op_utils.c: Include sim-syscall.h.
 154         (syscall_read_mem, syscall_write_mem): Delete.
 155         (do_syscall): Change syscall_read_mem/syscall_write_mem
 156         to sim_syscall_read_mem/sim_syscall_write_mem.  Set syscall.p2.
 157
 158 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 159
 160         * configure: Regenerate.
 161
 162 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 163
 164         * configure: Regenerate.
 165
 166 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 167
 168         * interp.c (get_byte, get_half, get_word, put_byte, put_half,
 169         put_word): Delete.
 170         (sim_fetch_register): Inline put_word call.
 171         (sim_store_register): Inline get_word call.
 172         * mn10300_sim.h (struct _state): Delete mem member.
 173         (OP, Simops, get_byte, get_half, get_word, put_byte, put_half,
 174         put_word, map): Delete.
 175         * op_utils.c (MEMPTR): Delete.
 176
 177 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 178
 179         * interp.c (round_64, fpu_status_ok): Add static.
 180
 181 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 182
 183         * interp.c (mn10300_debug): Delete.
 184         * mn10300_sim.h (DEBUG_TRACE, DEBUG_VALUES, mn10300_debug): Delete.
 185         (struct _state): Delete exception and exited members.
 186         [_WIN32] (SIGTRAP, SIGQUIT): Delete.
 187         * op_utils.c (do_syscall): Call sim_engine_halt instead of setting
 188         State.exception.
 189
 190 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 191
 192         * mn10300_sim.h (uint8, int8, uint16, int16, uint32, int32): Typedef
 193         in terms of unsigned8, signed8, unsigned16, signed16, unsigned32,
 194         and signed32 respectively.
 195
 196 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 197
 198         * interp.c (INLINE): Delete define.
 199         * mn10300_sim.h (INLINE): Likewise.
 200
 201 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 202
 203         * sim-main.h (SIM_CPU): Delete.
 204
 205 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 206
 207         * sim-main.h (sim_cia): Delete.
 208         (SIM_ADDR): Delete comment.
 209
 210 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 211
 212         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Change CIA_GET to
 213         CPU_PC_GET and CIA_SET to CPU_PC_SET.
 214         * interp.c (sim_create_inferior): Change CIA_SET to CPU_PC_SET.
 215         (program_interrupt): Change CIA_GET to CPU_PC_GET and CIA_SET to
 216         CPU_PC_SET.
 217         (mn10300_cpu_exception_trigger): Change CIA_SET to CPU_PC_SET.
 218         (mn10300_cpu_exception_suspend): Likewise.
 219         (mn10300_cpu_exception_resume): Likewise.
 220         * sim-main.h (CIA_GET, CIA_SET): Delete.
 221
 222 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 223
 224         * Makefile.in (MN10300_OBJS): Delete sim-cpu.o.
 225         * sim-main.h (STATE_CPU): Delete.
 226
 227 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 228
 229         * configure: Regenerate.
 230
 231 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 232
 233         * Makefile.in (MN10300_OBJS): Add sim-cpu.o.
 234         * interp.c (mn10300_pc_get, mn10300_pc_set): New functions.
 235         (sim_open): Declare new local var i.  Call sim_cpu_alloc_all.
 236         Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
 237         (sim_pc_get): Delete.
 238         * sim-main.h (null_cia, NULL_CIA): Delete.
 239         (SIM_CPU): Define.
 240         (struct sim_state): Change cpu to an array of pointers.
 241         (STATE_CPU): Drop & and handle WITH_SMP.
 242
 243 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 246
 247 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 248
 249         * config.in, configure: Regenerate.
 250
 251 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * interp.c (sim_pc_get): New function.
 254
 255 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 256
 257         * configure: Regenerate.
 258
 259 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 260
 261         * Makefile.in (MN10300_OBJS): Delete dv-sockser.o.
 262
 263 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 264
 265         * configure: Regenerate.
 266
 267 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 268
 269         * configure: Regenerate.
 270
 271 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 272
 273         * configure: Regenerate.
 274
 275 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 276
 277         * configure: Regenerate.
 278         * configure.ac: Delete SIM_DV_SOCKSER_O check.
 279
 280 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 281
 282         * config.in, configure: Regenerate.
 283
 284 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 285
 286         * tconfig.in: Delete file.
 287
 288 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 289
 290         * Makefile.in (SIM_RUN_OBJS): Delete.
 291
 292 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 293
 294         * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
 295         string.h & strings.h & time.h.
 296         * aclocal.m4, configure: Regenerate.
 297
 298 2014-08-19  Alan Modra  <amodra@gmail.com>
 299
 300         * configure: Regenerate.
 301
 302 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 303
 304         * configure: Regenerate.
 305         * config.in: Regenerate.
 306
 307 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 308
 309         * configure: Regenerate.
 310
 311 2013-09-23  Alan Modra  <amodra@gmail.com>
 312
 313         * configure: Regenerate.
 314
 315 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 316
 317         * aclocal.m4, configure: Regenerate.
 318
 319 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 320
 321         * configure: Rebuild.
 322
 323 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 324
 325         * configure: Regenerate.
 326
 327 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 328
 329         * configure.ac: Fail if dv-sockser.o not available.
 330         Error when --disable-sim-hardware is specified.
 331         * tconfig.in: Conditionalize use of dv_sockser_install.
 332         * configure: Regenerated.
 333         * config.in: Regenerated.
 334
 335 2012-06-17  Hans-Peter Nilsson  <hp@axis.com>
 336
 337         * interp.c: Include config.h first.  Do not include sysdep.h.
 338
 339 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 340
 341         * config.in, configure: Regenerate.
 342
 343 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 344
 345         * aclocal.m4, config.in, configure: Regenerate.
 346
 347 2012-02-16  Kevin Buettner  <kevinb@redhat.com>
 348
 349         * interp.c (sim_fetch_register): Return length, not -1.
 350
 351 2012-01-02  Joel Brobecker  <brobecker@adacore.com>
 352
 353         * sim-main.h: Reformat copyright header.
 354
 355 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 356
 357         * aclocal.m4: New file.
 358         * configure: Regenerate.
 359
 360 2011-11-07  Mike Frysinger  <vapier@gentoo.org>
 361
 362         PR sim/9302
 363         * dv-mn103iop.c (write_dedicated_control_reg): Convert && to &.
 364
 365 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 366
 367         * configure: Regenerate after common/acinclude.m4 update.
 368
 369 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 370
 371         * configure.ac: Change include to common/acinclude.m4.
 372
 373 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 374
 375         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 376         call.  Replace common.m4 include with SIM_AC_COMMON.
 377         * configure: Regenerate.
 378
 379 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
 380
 381         * interp.c (sim_do_command): Delete.
 382
 383 2011-06-20  Nick Clifton  <nickc@redhat.com>
 384
 385         * am33.igen (sub Rm,Rn,Rd): Fix computation of carry flag.
 386
 387 2011-01-11  Andrew Burgess  <aburgess@broadcom.com>
 388
 389         * interp.c (sim_store_register): Update return value to
 390         match new API.
 391
 392 2010-04-19  Mike Frysinger  <vapier@gentoo.org>
 393
 394         * dv-mn103ser.c (sockser_addr, USE_SOCKSER_P): Delete
 395         (do_polling_event): Change USE_SOCKSER_P to dv_sockser_status.
 396         (read_status_reg): Likewise.
 397         (write_txb): Likewise.
 398
 399 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 400
 401         * configure: Regenerate.
 402
 403 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 404
 405         * config.in: Regenerate.
 406         * configure: Likewise.
 407
 408         * configure: Regenerate.
 409
 410 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 411
 412         * configure: Regenerate to track ../common/common.m4 changes.
 413         * config.in: Ditto.
 414
 415 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 416             Daniel Jacobowitz  <dan@codesourcery.com>
 417             Joseph Myers  <joseph@codesourcery.com>
 418
 419         * configure: Regenerate.
 420
 421 2006-12-21  Hans-Peter Nilsson  <hp@axis.com>
 422
 423         * acconfig.h: Remove.
 424         * config.in: Regenerate.
 425
 426 2006-06-13  Richard Earnshaw  <rearnsha@arm.com>
 427
 428         * configure: Regenerated.
 429
 430 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 431
 432         * configure: Regenerated.
 433
 434 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 435
 436         * configure: Regenerated.
 437
 438 2006-03-29  Hans-Peter Nilsson  <hp@axis.com>
 439
 440         * configure: Regenerate.
 441
 442 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 443
 444         * configure: Regenerate.
 445
 446 2005-01-14  Andrew Cagney  <cagney@gnu.org>
 447
 448         * configure.ac: Sinclude aclocal.m4 before common.m4.  Add
 449         explicit call to AC_CONFIG_HEADER.
 450         * configure: Regenerate.
 451
 452 2005-01-12  Andrew Cagney  <cagney@gnu.org>
 453
 454         * configure.ac: Update to use ../common/common.m4.
 455         * configure: Re-generate.
 456
 457 2005-01-11  Andrew Cagney  <cagney@localhost.localdomain>
 458
 459         * configure: Regenerated to track ../common/aclocal.m4 changes.
 460
 461 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 462
 463         * configure.ac: Rename configure.in, require autoconf 2.59.
 464         * configure: Re-generate.
 465
 466 2004-12-08  Hans-Peter Nilsson  <hp@axis.com>
 467
 468         * configure: Regenerate for ../common/aclocal.m4 update.
 469
 470 2004-06-26  Alexandre Oliva  <aoliva@redhat.com>
 471
 472         2000-08-07  Graham Stott  <grahams@cygnus.co.uk>
 473         * am33-2.igen (fmadd, fmsub, fmnadd, fmnsub): Correct typo.
 474         2000-05-29  Alexandre Oliva  <aoliva@cygnus.com>
 475         * interp.c (fpu_disabled_exception, fpu_unimp_exception,
 476         fpu_check_signal_exception): Take additional state arguments.
 477         Print exception type and call program_interrupt.  Adjust callers.
 478         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 479         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Take additional
 480         arguments.
 481         * mn10300_sim.h (fpu_disabled_exception, fpu_unimp_exception,
 482         fpu_check_signal_exception): Adjust prototypes.
 483         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 484         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Likewise.
 485         * am33-2.igen: Adjust calls.
 486         2000-05-19  Alexandre Oliva  <aoliva@cygnus.com>
 487         * op_utils.c (cmp2fcc): Moved...
 488         * interp.c: ... here.
 489         2000-05-18  Alexandre Oliva  <aoliva@cygnus.com>
 490         * am33-2.igen: Use `unsigned32', `signed32', `unsigned64' or
 491         `signed64' where type width is relevant.
 492         2000-05-15  Alexandre Oliva  <aoliva@cygnus.com>
 493         * mn10300_sim.h: Include sim-fpu.h.
 494         (FD2FPU, FPU2FD): Enclose the FD argument in parentheses.
 495         (fpu_check_signal_exception): Declare.
 496         (struct fp_prec_t, fp_single_prec, fp_double_prec): Likewise.
 497         (FP_SINGLE, FP_DOUBLE): Shorthands for fp_*_prec.
 498         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 499         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Declare.
 500         * interp.c (fpu_disabled_exception): Document.
 501         (fpu_unimp_exception): Likewise.
 502         (fpu_check_signal_exception): Define.
 503         (reg2val_32, round_32, val2reg_32, fp_single_prec): Likewise.
 504         (reg2val_64, round_64, val2reg_64, fp_double_prec): Likewise.
 505         (REG2VAL, ROUND, VAL2REG): Define shorthands.
 506         (fpu_status_ok): Define.
 507         (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
 508         fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Define.
 509         * am33-2.igen (frsqrt, fcmp, fadd, fsub, fmul, fdiv,
 510         fmadd, fmsub, fnmadd, fnmsub): Use new functions.
 511         2000-04-27  Alexandre Oliva  <aoliva@cygnus.com>
 512         * interp.c (sim_create_inferior): Set PSW bit to enable FP insns
 513         if architecture is AM33/2.0.
 514         * am33.igen: Include am33-2.igen.
 515         2000-04-23  Alexandre Oliva  <aoliva@cygnus.com>
 516         * mn10300.igen (movm, call, ret, retf): Check for am33_2 too.
 517         * am33.igen (movm): Likewise.
 518         2000-04-19  Alexandre Oliva  <aoliva@cygnus.com>
 519         * am33.igen: Added `*am33_2' to some instructions that were
 520         missing it.
 521         2000-04-07  Alexandre Oliva  <aoliva@cygnus.com>
 522         * am33-2.igen: New file.  All insns implemented, but FP flags are
 523         only set for fcmp, exceptional conditions are not handled yet.
 524         * Makefile.in (IGEN_INSN): Added am33-2.igen.
 525         (tmp-igen): Added -M am33_2.
 526         * mn10300.igen, am33.igen: Added `*am33_2' to all insns.
 527         * gencode.c: Support FMT_D3.
 528         * mn10300_sim.h (dword): New type.
 529         (struct _state): Added fpregs.
 530         (REG_FPCR, FPCR): New define.  All assorted bitmaps.
 531         (XS2FS, AS2FS, Xf2FD): New macros.
 532         (FS2FPU, FD2FPU, FPU2FS, FPU2FD): Likewise.
 533         (load_dword, store_dword): New functions or macros.
 534         (u642dw, dw2u64): New functions.
 535         (fpu_disabled_exception, fpu_unimp_exception): Declared.
 536         * interp.c (fpu_disabled_exception): Defined; no actual
 537         implementation.
 538         (fpu_unimp_exception): Likewise.
 539         * op_utils.c (cmp2fcc): New function.
 540
 541         * interp.c, mn10300_sim.h, op_utils.c: Convert function prototypes
 542         and definitions to ISO C.
 543
 544         * gencode.c, simops.c: Delete.
 545         * Makefile.in: Remove non-COMMON dependencies and commands.
 546
 547         * configure.in: Use common simulator always.  Don't subst sim_gen
 548         nor mn10300_common.
 549         * configure: Rebuilt.
 550         * Makefile.in (WITHOUT_COMMON_OBJS, WITHOUT_COMMON_INTERP_DEP,
 551         WITHOUT_COMMON_RUN_OBJS): Remove.
 552         (WITH_COMMON_OBJS): Rename to MN10300_OBJS.
 553         (WITH_COMMON_INTERP_DEP): Rename to MN10300_INTERP_DEP.
 554         (WITH_COMMON_RUN_OBJS): Rename to SIM_RUN_OBJS.
 555         (SIM_EXTRA_CFLAGS): Don't use @sim_gen@.
 556         * interp.c: Remove non-common bits.
 557         * mn10300_sim.h: Likewise.
 558
 559 2003-08-28  Andrew Cagney  <cagney@redhat.com>
 560
 561         * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
 562         "long".
 563         (read_status_reg): Cast "serial_reg" to "long".
 564         * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
 565         "long".
 566         (do_counter6_event, write_mode_reg, write_tm6md): Ditto.
 567
 568 2003-02-27  Andrew Cagney  <cagney@redhat.com>
 569
 570         * interp.c (sim_open, sim_create_inferior, sim_open)
 571         (sim_create_inferior): Rename _bfd to bfd.
 572
 573 2003-02-26  Andrew Cagney  <cagney@redhat.com>
 574
 575         * am33.igen: Call sim_engine_abort instead of abort.
 576
 577 2003-02-26  David Carlton  <carlton@math.stanford.edu>
 578
 579         * dv-mn103tim.c (read_special_timer6_reg): Add break after
 580         empty default: label.
 581         (write_special_timer6_reg): Ditto.
 582         Update copyright.
 583
 584 2002-11-28  Andrew Cagney  <cagney@redhat.com>
 585
 586         * sim-main.h: Only include "idecode.h" once.
 587         * Makefile.in (SIM_EXTRA_DEPS): Define.
 588
 589 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 590
 591         * configure: Regenerated to track ../common/aclocal.m4 changes.
 592
 593 2002-06-09  Andrew Cagney  <cagney@redhat.com>
 594
 595         * Makefile.in (INCLUDE): Update path to callback.h.
 596         * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
 597         * tconfig.in: Ditto.
 598
 599 2001-05-06  Jim Blandy  <jimb@redhat.com>
 600
 601         * mn10300.igen: Doc fixes.
 602
 603 2001-04-26  Alexandre Oliva  <aoliva@redhat.com>
 604
 605         * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o):
 606         Depend on targ-vals.h.
 607
 608 2001-04-15  J.T. Conklin  <jtc@redback.com>
 609
 610         * Makefile.in (simops.o): Add simops.h to dependency list.
 611
 612 Wed Aug  9 02:24:53 2000  Graham Stott  <grahams@cygnus.co.uk>
 613
 614         * am33.igen: Warning clean-up.
 615         (movm): Initialize PC and mask.
 616         (mov, movbu, movhu): Set srcreg2 from RI0.
 617         (bsch): Initialize c.
 618         (sat16_cmp): Actually do the comparison.
 619         (mov_llt): Do not overwrite dstreg with uninitialized variable.
 620
 621 Tue May 23 21:39:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 622
 623         * configure: Regenerated to track ../common/aclocal.m4 changes.
 624
 625 2000-05-22  Alexandre Oliva  <aoliva@cygnus.com>
 626
 627         * am33.igen: Fix leading comments of SP-relative offset insns that
 628         referred to other registers.  Make their offsets unsigned.
 629
 630 2000-05-18  Alexandre Oliva  <aoliva@cygnus.com>
 631
 632         * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
 633         genericXor, genericBtst): Use `unsigned32'.
 634         * op_utils.c: Likewise.
 635         * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
 636         `unsigned64' or `signed64' where type width is relevant.
 637
 638 2000-04-25  Alexandre Oliva  <aoliva@cygnus.com>
 639
 640         * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
 641
 642 2000-04-09  Alexandre Oliva  <aoliva@cygnus.com>
 643
 644         * am33.igen: Make SP-relative offsets unsigned.  Add `*am33' for
 645         some instructions that were missing it.
 646
 647 2000-03-03  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
 648
 649         * Makefile.in (IGEN_INSN): Added am33.igen.
 650
 651 Thu Sep  2 18:15:53 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 652
 653         * configure: Regenerated to track ../common/aclocal.m4 changes.
 654
 655 Tue Jul 13 13:26:20 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 656
 657         * interp.c: Clarify error message reporting an unknown board.
 658
 659 1999-05-08  Felix Lee  <flee@cygnus.com>
 660
 661         * configure: Regenerated to track ../common/aclocal.m4 changes.
 662
 663 1999-04-16  Frank Ch. Eigler  <fche@cygnus.com>
 664
 665         * interp.c (program_interrupt): Detect undesired recursion using
 666         static flag.  Set NMIRC register's SYSEF flag during
 667         --board=stdeval1 mode.
 668         * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
 669         set SYSEF flag.
 670
 671 1999-04-02  Keith Seitz  <keiths@cygnus.com>
 672
 673         * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
 674         for use in the simulator so that the poll_quit callback is
 675         not called too often.
 676
 677 Tue Mar  9 21:26:41 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 678
 679         * dv-mn103int.c (mn103int_ioctl): Return something.
 680         * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
 681         within ||.
 682
 683 Tue Feb 16 23:57:17 1999  Jeffrey A Law  (law@cygnus.com)
 684
 685         * mn10300.igen (retf): Fix return address computation and store
 686         the new pc value into nia.
 687
 688 1998-12-29  Frank Ch. Eigler  <fche@cygnus.com>
 689
 690         * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
 691         * interp.c (sim_open): Add stub mn103002 cache control memory regions.
 692         Set OPERATING_ENVIRONMENT on "stdeval1" board.
 693         (mn10300_core_signal): New function to intercept memory errors.
 694         (program_interrupt): New function to dispatch to exception vector
 695         (mn10300_exception_*): New functions to snapshot pre/post exception
 696         state.
 697         * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
 698         (SIM_ENGINE_HALT_HOOK): Do nothing.
 699         (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
 700         (_sim_cpu): Add exc_* fields to store register value snapshots.
 701         * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
 702         Various endianness and warning fixes.
 703         * mn10300.igen (illegal): Call program_interrupt on error.
 704         (break): Call program_interrupt on breakpoint
 705
 706         Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
 707         merged in:
 708         * dv-mn103int.c (mn103int_ioctl): New function for NMI
 709         generation. (mn103int_finish): Install it as ioctl handler.
 710         * dv-mn103tim.c: Support timer 6 specially.  Endianness fixes.
 711
 712 Wed Oct 14 12:11:05 1998  Jeffrey A Law  (law@cygnus.com)
 713
 714         * am33.igen: Allow autoincrement stores using the same register
 715         for source and destination operands.
 716
 717 Mon Aug 31 10:19:55 1998  Jeffrey A Law  (law@cygnus.com)
 718
 719         * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
 720
 721 Fri Aug 28 14:40:49 1998  Joyce Janczyn  <janczyn@cygnus.com>
 722
 723         * interp.c (sim_open): Check for invalid --board option, fix
 724         indentation, allocate memory for mem control and DMA regs.
 725
 726 Wed Aug 26 09:29:38 1998  Joyce Janczyn  <janczyn@cygnus.com>
 727
 728         * mn10300.igen (div,divu): Fix divide instructions so divide by 0
 729         behaves like the hardware.
 730
 731 Mon Aug 24 11:50:09 1998  Joyce Janczyn  <janczyn@cygnus.com>
 732
 733         * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
 734
 735 Wed Aug 12 12:36:07 1998  Jeffrey A Law  (law@cygnus.com)
 736
 737         * am33.igen: Handle case where first DSP operation modifies a
 738         register used in the second DSP operation correctly.
 739
 740 Tue Jul 28 10:10:25 1998  Jeffrey A Law  (law@cygnus.com)
 741
 742         * am33.igen: Detect cases where two operands must not match for
 743         DSP instructions too.
 744
 745 Mon Jul 27 12:04:17 1998  Jeffrey A Law  (law@cygnus.com)
 746
 747         * am33.igen: Detect cases where two operands must not match in
 748         non-DSP instructions.
 749
 750 Fri Jul 24 18:15:21 1998  Joyce Janczyn  <janczyn@cygnus.com>
 751
 752         * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
 753         (syscall_read_mem, syscall_write_mem): New functions for syscall
 754         callbacks.
 755         * mn10300_sim.h: Add prototypes for syscall_read_mem and
 756         syscall_write_mem.
 757         * mn10300.igen: Change C++ style comments to C style comments.
 758         Check for divide by zero in div and divu ops.
 759
 760 Fri Jul 24 12:49:28 1998  Jeffrey A Law  (law@cygnus.com)
 761
 762         * am33.igen (translate_xreg): New function.  Use it as needed.
 763
 764 Thu Jul 23 10:05:28 1998  Jeffrey A Law  (law@cygnus.com)
 765
 766         * am33.igen: Add some missing instructions.
 767
 768         * am33.igen: Autoincrement loads/store fixes.
 769
 770 Tue Jul 21 09:48:14 1998  Jeffrey A Law  (law@cygnus.com)
 771
 772         * am33.igen: Add mov_lCC DSP instructions.
 773
 774         * am33.igen: Add most am33 DSP instructions.
 775
 776 Thu Jul  9 10:06:55 1998  Jeffrey A Law  (law@cygnus.com)
 777
 778         * mn10300.igen: Fix Z bit for addc and subc instructions.
 779         Minor fixes in multiply/divide patterns.
 780
 781         * am33.igen: Add missing mul[u] imm32,Rn.  Fix condition code
 782         handling for many instructions.  Fix sign extension for some
 783         24bit immediates.
 784
 785         * am33.igen: Fix Z bit for remaining addc/subc instructions.
 786         Do not sign extend immediate for mov imm,XRn.
 787         More random mul, mac & div fixes.
 788         Remove some unused variables.
 789         Sign extend 24bit displacement in memory addresses.
 790
 791         * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn.  Various
 792         fixes to 2 register multiply, divide and mac instructions.  Set
 793         Z,N correctly for sat16.  Sign extend 24 bit immediate for add,
 794         and sub instructions.
 795
 796         * am33.igen: Add remaining non-DSP instructions.
 797
 798 Wed Jul  8 16:29:12 1998  Jeffrey A Law  (law@cygnus.com)
 799
 800         * am33.igen (translate_rreg): New function.  Use it as appropriate.
 801
 802         * am33.igen: More am33 instructions.  Fix "div".
 803
 804 Mon Jul  6 15:39:22 1998  Jeffrey A Law  (law@cygnus.com)
 805
 806         * mn10300.igen: Add am33 support.
 807
 808         * Makefile.in: Use multi-sim to support both a mn10300 and am33
 809         simulator.
 810
 811         * am33.igen: Add many more am33 instructions.
 812
 813 Wed Jul  1 17:07:09 1998  Jeffrey A Law  (law@cygnus.com)
 814
 815         * mn10300_sim.h (FETCH24): Define.
 816
 817         * mn10300_sim.h: Add defines for some registers found on the AM33.
 818         * am33.igen: New file with some am33 support.
 819
 820 Tue Jun 30 11:23:20 1998  Jeffrey A Law  (law@cygnus.com)
 821
 822         * mn10300_sim.h: Include bfd.h
 823         (struct state): Add more room for processor specific registers.
 824         (REG_E0): Define.
 825
 826 Thu Jun 25 10:12:03 1998  Joyce Janczyn  <janczyn@cygnus.com>
 827
 828         * dv-mn103tim.c: Include sim-assert.h
 829         * dv-mn103ser.c (do_polling_event): Check for incoming data on
 830         serial line and schedule next polling event.
 831         (read_status_reg): schedule events to check for incoming data on
 832         serial line and issue interrupt if necessary.
 833
 834 Fri Jun 19 16:47:27 1998  Joyce Janczyn  <janczyn@cygnus.com>
 835
 836         * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
 837
 838 Fri Jun 19 11:59:26 1998  Joyce Janczyn  <janczyn@cygnus.com>
 839
 840         * interp.c (board): Rename am32 to stdeval1 as this is the name
 841         consistently used to refer to the mn1030002 board.
 842
 843 Thu June 18 14:37:14 1998  Joyce Janczyn  <janczyn@cygnus.com>
 844         * interp.c (sim_open): Fix typo in address of EXTMD register
 845         (0x34000280, not 0x3400280).
 846
 847 Wed Jun 17 18:00:18 1998  Jeffrey A Law  (law@cygnus.com)
 848
 849         * simops.c (syscall): Handle change in opcode # for syscall.
 850         * mn10300.igen (syscall): Likewise.
 851
 852 Tue June 16 09:36:21 1998  Joyce Janczyn  <janczyn@cygnus.com>
 853         * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
 854         reset) are not enabled on reset.
 855
 856 Sun June 14 17:04:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 857         * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
 858         register bits.
 859         * dv-mn103ser.c: Fill in methods for reading and writing to serial
 860         device registers.
 861         * interp.c (sim_open): Make the serial device a polling device.
 862
 863 Fri June 12 16:24:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 864         * dv-mn103iop.c: New file for handling am32 io ports.
 865         * configure.in: Add mn103iop to hw_device list.
 866         * configure: Re-generate.
 867         * interp.c (sim_open): Create io port device.
 868
 869 Wed June 10 14:34:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 870         * dv-mn103int.c (external_group): Use enumerated types to access
 871         correct group addresses.
 872         * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
 873         triggers an interrupt on the higher-numbered timer's port.
 874
 875 Mon June 8 13:30:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 876         * interp.c: (mn10300_option_handler): New function parses arguments
 877         using sim-options.
 878         * (board): Add --board option for specifying am32.
 879         * (sim_open): Create new timer and serial devices and control
 880         configuration of other am32 devices via board option.
 881         * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
 882         * dv-mn103cpu.c: Fix typos in opening comments.
 883         * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
 884         * configure.in: Add mn103tim and mn103ser to hw_device list.
 885         * configure: Re-generate.
 886
 887 Mon May 25 20:50:35 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 888
 889         * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
 890
 891         * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
 892         sim-main.h. Declare a struct hw_descriptor instead of struct
 893         hw_device_descriptor.
 894
 895 Mon May 25 17:33:33 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 896
 897         * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
 898         to struct hw_event.
 899
 900 Fri May 22 12:17:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 901
 902         * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
 903
 904 Wed May  6 13:29:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 905
 906         * interp.c (sim_open): Create a polling PAL device.
 907
 908 Fri May  1 16:39:15 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 909
 910         * dv-mn103int.c (mn103int_port_event):
 911         (mn103int_port_event):
 912         (mn103int_io_read_buffer):
 913         (mn103int_io_write_buffer):
 914
 915         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
 916         (mn103cpu_port_event): Ditto.
 917         (mn103cpu_io_read_buffer): Ditto.
 918         (mn103cpu_io_write_buffer): Ditto.
 919
 920 Tue Apr 28 18:33:31 1998  Geoffrey Noer  <noer@cygnus.com>
 921
 922         * configure: Regenerated to track ../common/aclocal.m4 changes.
 923
 924 Sun Apr 26 15:31:55 1998  Tom Tromey  <tromey@creche>
 925
 926         * configure: Regenerated to track ../common/aclocal.m4 changes.
 927         * config.in: Ditto.
 928
 929 Sun Apr 26 15:19:55 1998  Tom Tromey  <tromey@cygnus.com>
 930
 931         * acconfig.h: New file.
 932         * configure.in: Reverted change of Apr 24; use sinclude again.
 933
 934 Fri Apr 24 14:16:40 1998  Tom Tromey  <tromey@creche>
 935
 936         * configure: Regenerated to track ../common/aclocal.m4 changes.
 937         * config.in: Ditto.
 938
 939 Fri Apr 24 11:19:07 1998  Tom Tromey  <tromey@cygnus.com>
 940
 941         * configure.in: Don't call sinclude.
 942
 943 Tue Apr 14 10:03:02 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 944
 945         * mn10300_sim.h: Declare all functions in op_utils.c using
 946         INLINE_SIM_MAIN.
 947         * op_utils.c: Ditto.
 948         * sim-main.c: New file.  Include op_utils.c.
 949
 950         * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
 951         differentiate between MOV/CMP immediate/register instructions.
 952
 953         * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
 954         * configure: Regenerate.
 955
 956 Sat Apr  4 20:36:25 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 957
 958         * configure: Regenerated to track ../common/aclocal.m4 changes.
 959
 960 Fri Mar 27 16:15:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 961
 962         * interp.c (hw): Delete variable, moved to SIM_DESC.
 963         (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
 964         Handled by sim-module.
 965         (sim_open): Do not anotate tree with trace properties, handled by
 966         sim-hw.c
 967         (sim_open): Call sim_hw_parse instead of hw_tree_parse.
 968
 969         * configure: Regenerated to track ../common/aclocal.m4 changes.
 970
 971 Thu Mar 26 20:46:18 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 972
 973         * dv-mn103cpu.c (deliver_mn103cpu_interrupt):  Save the entire PC
 974         on the stack when delivering interrupts (not just the lower
 975         half)...
 976         * mn10300.igen (mov (Di,Am),Dn):  Fix decode.  Registers were
 977         specified in the wrong order.
 978
 979 Fri Mar 27 00:56:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 980
 981         * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
 982         succeeding interrupts, clear pending_handler when the handler
 983         isn't re-scheduled.
 984
 985 Thu Mar 26 10:11:01 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 986
 987         * Makefile.in (tmp-igen):  Prefix all usage of move-if-change
 988         script with $(SHELL) to make NT native builds happy.
 989         * configure:  Regenerate because of change to ../common/aclocal.m4.
 990
 991 Thu Mar 26 11:22:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 992
 993         * configure.in: Make --enable-sim-common the default.
 994         * configure: Re-generate.
 995
 996         * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
 997         address into Sate.regs[REG_PC] instead of common struct.
 998
 999 Wed Mar 25 17:42:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1000
1001         * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
1002
1003 Wed Mar 25 12:08:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1004
1005         * simops.c (OP_F0FD): Initialise variable 'sp'.
1006
1007 Thu Mar 26 00:21:32 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1008
1009         * dv-mn103int.c (decode_group): A group register every 4 bytes not
1010         8.
1011         (write_icr): Rewrite equation updating request field.
1012         (read_iagr): Fix check that interrupt is still pending.
1013
1014 Wed Mar 25 16:14:50 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1015
1016         * interp.c (sim_open): Tidy up device creation.
1017
1018         * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
1019         value.
1020         (mn103int_io_read_buffer): Convert absolute address to register
1021         block offsets.
1022         (read_icr, write_icr): Convert block offset into group offset.
1023
1024 Wed Mar 25 15:08:49 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1025
1026         * interp.c (sim_open): Create second 1mb memory region at
1027         0x40000000.
1028         (sim_open): Create a device tree.
1029         (sim-hw.h): Include.
1030         (do_interrupt): Delete, needs to use dv-mn103cpu.c
1031
1032         * dv-mn103int.c, dv-mn103cpu.c: New files.
1033
1034 Wed Mar 25 08:47:38 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1035
1036         * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
1037         Define.
1038         (SP): Define.
1039
1040 Wed Mar 25 12:35:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1041
1042         * configure: Regenerated to track ../common/aclocal.m4 changes.
1043
1044 Wed Mar 25 10:24:48 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1045
1046         * interp.c (sim-options.h): Include.
1047         (sim_kind, myname): Declare when not using common framework.
1048
1049         * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
1050         functions found in op_utils.c
1051
1052         * mn10300.igen (add): Discard unused variables.
1053
1054         * configure, config.in: Re-generate with autoconf 2.12.1.
1055
1056 Tue Mar 24 15:27:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1057
1058         Add support for --enable-sim-common option.
1059         * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
1060         ! --enable-sim-common
1061         (WITH_COMMON_OBJS): Files included if --enable-sim-common.
1062         (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
1063         (SIM_OBJS): Rewrite.
1064         ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
1065         (SIM_EXTRA_CFLAGS): New variable.
1066         (clean-extra): Clean up igen files.
1067         (../igen/igen,clean-igen,tmp-igen): New rules.
1068         * configure.in: Add support for common framework via
1069         --enable-sim-common.
1070         * configure: Regenerate.
1071         * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
1072         (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
1073         (init_system,sim_write,compare_simops): Likewise.
1074         (sim_set_profile,sim_set_profile_size): Likewise.
1075         (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
1076         (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
1077         (enum interrupt_type): New enum.
1078         (interrupt_names): New global.
1079         (do_interrupt): New function.
1080         (sim_open): Define differently if WITH_COMMON.
1081         (sim_close,sim_create_inferior,sim_do_command): Likewise.
1082         * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
1083         for WITH_COMMON.
1084         * mn10300.igen: New file.
1085         * mn10300.dc: New file.
1086         * op_utils.c: New file.
1087         * sim-main.h: New file.
1088
1089 Wed Mar 18 12:38:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1090
1091         * configure: Regenerated to track ../common/aclocal.m4 changes.
1092
1093 Fri Feb 27 18:36:04 1998  Jeffrey A Law  (law@cygnus.com)
1094
1095         * simops.c (inc): Fix typo.
1096
1097 Wed Feb 25 01:59:29 1998  Jeffrey A Law  (law@cygnus.com)
1098
1099         * simops.c (signed multiply instructions): Cast input operands to
1100         signed32 before casting them to signed64 so that the sign bit
1101         is propagated properly.
1102
1103 Mon Feb 23 20:23:19 1998  Mark Alexander  <marka@cygnus.com>
1104
1105         * Makefile.in: Last change was bad.  Define NL_TARGET
1106         so that targ-vals.h will be used instead of syscall.h.
1107         * simops.c: Use targ-vals.h instead of syscall.h.
1108         (OP_F020): Disable unsupported system calls.
1109
1110 Mon Feb 23 09:44:38 1998  Mark Alexander  <marka@cygnus.com>
1111
1112         * Makefile.in: Get header files from libgloss/mn10300/sys.
1113
1114 Sun Feb 22 16:02:24 1998  Jeffrey A Law  (law@cygnus.com)
1115
1116         * simops.c: Include sim-types.h.
1117
1118 Wed Feb 18 13:07:08 1998  Jeffrey A Law  (law@cygnus.com)
1119
1120         * simops.c (multiply instructions): Cast input operands to a
1121         signed64/unsigned64 type as appropriate.
1122
1123 Tue Feb 17 12:47:16 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1124
1125         * interp.c (sim_store_register, sim_fetch_register): Pass in
1126         length parameter.  Return -1.
1127
1128 Sun Feb  1 16:47:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1129
1130         * configure: Regenerated to track ../common/aclocal.m4 changes.
1131
1132 Sat Jan 31 18:15:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1133
1134         * configure: Regenerated to track ../common/aclocal.m4 changes.
1135
1136 Mon Jan 19 22:26:29 1998  Doug Evans  <devans@seba>
1137
1138         * configure: Regenerated to track ../common/aclocal.m4 changes.
1139
1140 Mon Dec 15 23:17:11 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1141
1142         * configure: Regenerated to track ../common/aclocal.m4 changes.
1143         * config.in: Ditto.
1144
1145 Thu Dec  4 09:21:05 1997  Doug Evans  <devans@canuck.cygnus.com>
1146
1147         * configure: Regenerated to track ../common/aclocal.m4 changes.
1148
1149 Tue Nov 11 10:38:52 1997  Jeffrey A Law  (law@cygnus.com)
1150
1151         * simops.c (call:16 call:32): Stack adjustment is determined solely
1152         by the imm8 field.
1153
1154 Wed Oct 22 14:43:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1155
1156         * interp.c (sim_load): Pass lma_p and sim_write args to
1157         sim_load_file.
1158
1159 Tue Oct 21 10:12:03 1997  Jeffrey A Law  (law@cygnus.com)
1160
1161         * simops.c: Correctly handle register restores for "ret" and "retf"
1162         instructions.
1163
1164 Fri Oct  3 09:28:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1165
1166         * configure: Regenerated to track ../common/aclocal.m4 changes.
1167
1168 Wed Sep 24 17:38:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1169
1170         * configure: Regenerated to track ../common/aclocal.m4 changes.
1171
1172 Tue Sep 23 11:04:38 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1173
1174         * configure: Regenerated to track ../common/aclocal.m4 changes.
1175
1176 Mon Sep 22 11:46:20 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1177
1178         * configure: Regenerated to track ../common/aclocal.m4 changes.
1179
1180 Fri Sep 19 17:45:25 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1181
1182         * configure: Regenerated to track ../common/aclocal.m4 changes.
1183
1184 Mon Sep 15 17:36:15 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1185
1186         * configure: Regenerated to track ../common/aclocal.m4 changes.
1187
1188 Thu Sep  4 17:21:23 1997  Doug Evans  <dje@seba>
1189
1190         * configure: Regenerated to track ../common/aclocal.m4 changes.
1191
1192 Wed Aug 27 18:13:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1193
1194         * configure: Regenerated to track ../common/aclocal.m4 changes.
1195         * config.in: Ditto.
1196
1197 Tue Aug 26 10:41:07 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1198
1199         * interp.c (sim_kill): Delete.
1200         (sim_create_inferior): Add ABFD argument.
1201         (sim_load): Move setting of PC from here.
1202         (sim_create_inferior): To here.
1203
1204 Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1205
1206         * configure: Regenerated to track ../common/aclocal.m4 changes.
1207         * config.in: Ditto.
1208
1209 Mon Aug 25 16:14:44 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1210
1211         * interp.c (sim_open): Add ABFD argument.
1212
1213 Tue Jun 24 13:46:20 1997  Jeffrey A Law  (law@cygnus.com)
1214
1215         * interp.c (sim_resume): Clear State.exited.
1216         (sim_stop_reason): If State.exited is nonzero, then indicate that
1217         the simulator exited instead of stopped.
1218         * mn10300_sim.h (struct _state): Add exited field.
1219         * simops.c (syscall): Set State.exited for SYS_exit.
1220
1221 Wed Jun 11 22:07:56 1997  Jeffrey A Law  (law@cygnus.com)
1222
1223         * simops.c: Fix thinko in last change.
1224
1225 Tue Jun 10 12:31:32 1997  Jeffrey A Law  (law@cygnus.com)
1226
1227         * simops.c: "call" stores the callee saved registers into the
1228         stack!  Update the stack pointer properly when done with
1229         register saves.
1230
1231         * simops.c: Fix return address computation for "call" instructions.
1232
1233 Thu May 22 01:43:11 1997  Jeffrey A Law  (law@cygnus.com)
1234
1235         * interp.c (sim_open): Fix typo.
1236
1237 Wed May 21 23:27:58 1997  Jeffrey A Law  (law@cygnus.com)
1238
1239         * interp.c (sim_resume): Add missing case in big switch
1240         statement (for extb instruction).
1241
1242 Tue May 20 17:51:30 1997  Jeffrey A Law  (law@cygnus.com)
1243
1244         * interp.c: Replace all references to load_mem and store_mem
1245         with references to load_byte, load_half, load_3_byte, load_word
1246         and store_byte, store_half, store_3_byte, store_word.
1247         (INLINE): Delete definition.
1248         (load_mem_big): Likewise.
1249         (max_mem): Make it global.
1250         (dispatch): Make this function inline.
1251         (load_mem, store_mem): Delete functions.
1252         * mn10300_sim.h (INLINE): Define.
1253         (RLW): Delete unused definition.
1254         (load_mem, store_mem): Delete declarations.
1255         (load_mem_big): New definition.
1256         (load_byte, load_half, load_3_byte, load_word): New functions.
1257         (store_byte, store_half, store_3_byte, store_word): New functions.
1258         * simops.c:  Replace all references to load_mem and store_mem
1259         with references to load_byte, load_half, load_3_byte, load_word
1260         and store_byte, store_half, store_3_byte, store_word.
1261
1262 Tue May 20 10:21:51 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1263
1264         * interp.c (sim_open): Add callback to arguments.
1265         (sim_set_callbacks): Delete SIM_DESC argument.
1266
1267 Mon May 19 13:54:22 1997  Jeffrey A Law  (law@cygnus.com)
1268
1269         * interp.c (dispatch): Make this an inline function.
1270
1271         * simops.c (syscall): Use callback->write regardless of
1272         what file descriptor we're writing too.
1273
1274 Sun May 18 16:46:31 1997  Jeffrey A Law  (law@cygnus.com)
1275
1276         * interp.c (load_mem_big): Remove function.  It's now a macro
1277         defined elsewhere.
1278         (compare_simops): New function.
1279         (sim_open): Sort the Simops table before inserting entries
1280         into the hash table.
1281         * mn10300_sim.h: Remove unused #defines.
1282         (load_mem_big): Define.
1283
1284 Fri May 16 16:36:17 1997  Jeffrey A Law  (law@cygnus.com)
1285
1286         * interp.c (load_mem): If we get a load from an out of range
1287         address, abort.
1288         (store_mem): Likewise for stores.
1289         (max_mem): New variable.
1290
1291 Tue May  6 13:24:36 1997  Jeffrey A Law  (law@cygnus.com)
1292
1293         * mn10300_sim.h: Fix ordering of bits in the PSW.
1294
1295         * interp.c: Improve hashing routine to avoid long list
1296         traversals for common instructions.  Add HASH_STAT support.
1297         Rewrite opcode dispatch code using a big switch instead of
1298         cascaded if/else statements.  Avoid useless calls to load_mem.
1299
1300 Mon May  5 18:07:48 1997  Jeffrey A Law  (law@cygnus.com)
1301
1302         * mn10300_sim.h (struct _state): Add space for mdrq register.
1303         (REG_MDRQ): Define.
1304         * simops.c: Don't abort for trap.  Add support for the extended
1305         instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
1306         and "bsch".
1307
1308 Thu Apr 24 00:39:51 1997  Doug Evans  <dje@canuck.cygnus.com>
1309
1310         * configure: Regenerated to track ../common/aclocal.m4 changes.
1311
1312 Fri Apr 18 14:04:04 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1313
1314         * interp.c (sim_stop): Add stub function.
1315
1316 Thu Apr 17 03:26:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1317
1318         * Makefile.in (SIM_OBJS): Add sim-load.o.
1319         * interp.c (sim_kind, myname): New static locals.
1320         (sim_open): Set sim_kind, myname.  Ignore -E arg.
1321         (sim_load): Return SIM_RC.  New arg abfd.  Call sim_load_file to
1322         load file into simulator.  Set start address from bfd.
1323         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
1324
1325 Wed Apr 16 19:30:44 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1326
1327         * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
1328         only include if implemented by host.
1329         (OP_F020): Typecast arg passed to time function;
1330
1331 Mon Apr  7 23:57:49 1997  Jeffrey A Law  (law@cygnus.com)
1332
1333         * simops.c (syscall): Handle new mn10300 calling conventions.
1334
1335 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1336
1337         * configure: Regenerated to track ../common/aclocal.m4 changes.
1338         * config.in: Ditto.
1339
1340 Fri Apr  4 20:02:37 1997  Ian Lance Taylor  <ian@cygnus.com>
1341
1342         * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
1343         corresponding change in opcodes directory.
1344
1345 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
1346
1347         * interp.c (sim_open): New arg `kind'.
1348
1349         * configure: Regenerated to track ../common/aclocal.m4 changes.
1350
1351 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1352
1353         * configure: Regenerated to track ../common/aclocal.m4 changes.
1354
1355 Thu Mar 20 11:58:02 1997  Jeffrey A Law  (law@cygnus.com)
1356
1357         * simops.c: Fix register extraction for a two "movbu" variants.
1358         Somewhat simplify "sub" instructions.
1359         Correctly sign extend operands for "mul".  Put the correct
1360         half of the result in MDR for "mul" and "mulu".
1361         Implement remaining instructions.
1362         Tweak opcode for "syscall".
1363
1364 Tue Mar 18 14:21:21 1997  Jeffrey A Law  (law@cygnus.com)
1365
1366         * simops.c: Do syscall emulation in "syscall" instruction.  Add
1367         dummy "trap" instruction.
1368
1369 Wed Mar 19 01:14:00 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1370
1371         * configure: Regenerated to track ../common/aclocal.m4 changes.
1372
1373 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1374
1375         * configure: Re-generate.
1376
1377 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
1378
1379         * configure: Regenerate to track ../common/aclocal.m4 changes.
1380
1381 Thu Mar 13 12:54:45 1997  Doug Evans  <dje@canuck.cygnus.com>
1382
1383         * interp.c (sim_open): New SIM_DESC result.  Argument is now
1384         in argv form.
1385         (other sim_*): New SIM_DESC argument.
1386
1387 Wed Mar 12 15:04:00 1997  Jeffrey A Law  (law@cygnus.com)
1388
1389         * simops.c: Fix carry bit computation for "add" instructions.
1390
1391         * simops.c: Fix typos in bset insns.  Fix arguments to store_mem
1392         for bset imm8,(d8,an) and bclr imm8,(d8,an).
1393
1394 Wed Mar  5 15:00:10 1997  Jeffrey A Law  (law@cygnus.com)
1395
1396         * simops.c: Fix register references when computing Z and N bits
1397         for lsr imm8,dn.
1398
1399 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
1400
1401         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1402         COMMON_{PRE,POST}_CONFIG_FRAG instead.
1403         * configure.in: sinclude ../common/aclocal.m4.
1404         * configure: Regenerated.
1405
1406 Fri Jan 24 10:47:25 1997  Jeffrey A Law  (law@cygnus.com)
1407
1408         * interp.c (init_system): Allocate 2^19 bytes of space for the
1409         simulator.
1410
1411 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
1412
1413         * configure configure.in Makefile.in:  Update to new configure
1414         scheme which is more compatible with WinGDB builds.
1415         * configure.in:  Improve comment on how to run autoconf.
1416         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
1417         * Makefile.in:  Use autoconf substitution to install common
1418         makefile fragment.
1419
1420 Tue Jan 21 15:03:04 1997  Jeffrey A Law  (law@cygnus.com)
1421
1422         * simops.c: Undo last change to "rol" and "ror", original code
1423         was correct!
1424
1425 Thu Jan 16 11:28:14 1997  Jeffrey A Law  (law@cygnus.com)
1426
1427         * simops.c: Fix "rol" and "ror".
1428
1429 Wed Jan 15 06:45:58 1997  Jeffrey A Law  (law@cygnus.com)
1430
1431         * simops.c: Fix typo in last change.
1432
1433 Mon Jan 13 13:22:35 1997  Jeffrey A Law  (law@cygnus.com)
1434
1435         * simops.c: Use REG macros in few places not using them yet.
1436
1437 Mon Jan  6 16:21:19 1997  Jeffrey A Law  (law@cygnus.com)
1438
1439         * mn10300_sim.h (struct _state): Fix number of registers!
1440
1441 Tue Dec 31 16:20:41 1996  Jeffrey A Law  (law@cygnus.com)
1442
1443         * mn10300_sim.h (struct _state): Put all registers into a single
1444         array to make gdb implementation easier.
1445         (REG_*): Add definitions for all registers in the state array.
1446         (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
1447         * simops.c: Related changes.
1448
1449 Wed Dec 18 10:10:45 1996  Jeffrey A Law  (law@cygnus.com)
1450
1451         * interp.c (sim_resume): Handle 0xff as a single byte insn.
1452
1453         * simops.c: Fix overflow computation for "add" and "inc"
1454         instructions.
1455
1456 Mon Dec 16 10:03:52 1996  Jeffrey A Law  (law@cygnus.com)
1457
1458         * simops.c: Handle "break" instruction.
1459
1460         * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
1461
1462 Wed Dec 11 09:53:10 1996  Jeffrey A Law  (law@cygnus.com)
1463
1464         * gencode.c (write_opcodes): Also write out the format of the
1465         opcode.
1466         * mn10300_sim.h (simops): Add "format" field.
1467         * interp.c (sim_resume): Deal with endianness issues here.
1468
1469 Tue Dec 10 15:05:37 1996  Jeffrey A Law  (law@cygnus.com)
1470
1471         * simops.c (REG0_4): Define.
1472         Use REG0_4 for indexed loads/stores.
1473
1474 Sat Dec  7 09:50:28 1996  Jeffrey A Law  (law@cygnus.com)
1475
1476         * simops.c (REG0_16): Fix typo.
1477
1478 Fri Dec  6 14:13:34 1996  Jeffrey A Law  (law@cygnus.com)
1479
1480         * simops.c: Call abort for any instruction that's not currently
1481         simulated.
1482
1483         * simops.c: Define accessor macros to extract register
1484         values from instructions.  Use them consistently.
1485
1486         * interp.c: Delete unused global variable "OP".
1487         (sim_resume): Remove unused variable "opcode".
1488         * simops.c: Fix some uninitialized variable problems, add
1489         parens to fix various -Wall warnings.
1490
1491         * gencode.c (write_header): Add "insn" and "extension" arguments
1492         to the OP_* declarations.
1493         (write_template): Similarly for function templates.
1494         * interp.c (insn, extension): Remove global variables.  Instead
1495         pass them as arguments to the OP_* functions.
1496         * mn10300_sim.h: Remove decls for "insn" and "extension".
1497         * simops.c (OP_*): Accept "insn" and "extension" as arguments
1498         instead of using globals.
1499
1500 Thu Dec  5 22:26:31 1996  Jeffrey A Law  (law@cygnus.com)
1501
1502         * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
1503
1504         * simops.c: Fix thinkos in last change to "inc dn".
1505
1506 Wed Dec  4 10:57:53 1996  Jeffrey A Law  (law@cygnus.com)
1507
1508         * simops.c: "add imm,sp" does not effect the condition codes.
1509         "inc dn" does effect the condition codes.
1510
1511 Tue Dec  3 17:37:45 1996  Jeffrey A Law  (law@cygnus.com)
1512
1513         * simops.c: Treat both operands as signed values for
1514         "div" instruction.
1515
1516         * simops.c: Fix simulation of division instructions.
1517         Fix typos/thinkos in several "cmp" and "sub" instructions.
1518
1519 Mon Dec  2 12:31:40 1996  Jeffrey A Law  (law@cygnus.com)
1520
1521         * simops.c: Fix carry bit handling in "sub" and "cmp"
1522         instructions.
1523
1524         * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
1525
1526 Sun Dec  1 16:05:42 1996  Jeffrey A Law  (law@cygnus.com)
1527
1528         * simops.c: Fix overflow computation for many instructions.
1529
1530         * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
1531
1532         * simops.c: Fix "mov am, dn".
1533
1534         * simops.c: Fix more bugs in "add imm,an" and
1535         "add imm,dn".
1536
1537 Wed Nov 27 09:20:42 1996  Jeffrey A Law  (law@cygnus.com)
1538
1539         * simops.c: Fix bugs in "movm" and "add imm,an".
1540
1541         * simops.c: Don't lose the upper 24 bits of the return
1542         pointer in "call" and "calls" instructions.  Rough cut
1543         at emulated system calls.
1544
1545         * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
1546
1547         * simops.c: Implement remaining 4 byte instructions.
1548
1549         * simops.c: Implement remaining 3 byte instructions.
1550
1551         * simops.c: Implement remaining 2 byte instructions.  Call
1552         abort for instructions we're not implementing now.
1553
1554 Tue Nov 26 15:43:41 1996  Jeffrey A Law  (law@cygnus.com)
1555
1556         * simops.c: Implement lots of random instructions.
1557
1558         * simops.c: Implement "movm" and "bCC" insns.
1559
1560         * mn10300_sim.h (_state): Add another register (MDR).
1561         (REG_MDR): Define.
1562         * simops.c: Implement "cmp", "calls", "rets", "jmp" and
1563         a few additional random insns.
1564
1565         * mn10300_sim.h (PSW_*): Define for CC status tracking.
1566         (REG_D0, REG_A0, REG_SP): Define.
1567         * simops.c: Implement "add", "addc" and a few other random
1568         instructions.
1569
1570         * gencode.c, interp.c: Snapshot current simulator code.
1571
1572 Mon Nov 25 12:46:38 1996  Jeffrey A Law  (law@cygnus.com)
1573
1574         * Makefile.in, config.in, configure, configure.in: New files.
1575         * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.
1576