src/common/wpa_ctrl.h

   1 /*
   2  * wpa_supplicant/hostapd control interface library
   3  * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
   4  *
   5  * This software may be distributed under the terms of the BSD license.
   6  * See README for more details.
   7  */
   8
   9 #ifndef WPA_CTRL_H
  10 #define WPA_CTRL_H
  11
  12 #ifdef  __cplusplus
  13 extern "C" {
  14 #endif
  15
  16 /* wpa_supplicant control interface - fixed message prefixes */
  17
  18 /** Interactive request for identity/password/pin */
  19 #define WPA_CTRL_REQ "CTRL-REQ-"
  20
  21 /** Response to identity/password/pin request */
  22 #define WPA_CTRL_RSP "CTRL-RSP-"
  23
  24 /* Event messages with fixed prefix */
  25 /** Authentication completed successfully and data connection enabled */
  26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
  27 /** Disconnected, data connection is not available */
  28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
  29 /** Association rejected during connection attempt */
  30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
  31 /** Authentication rejected during connection attempt */
  32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
  33 /** wpa_supplicant is exiting */
  34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
  35 /** Password change was completed successfully */
  36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
  37 /** EAP-Request/Notification received */
  38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
  39 /** EAP authentication started (EAP-Request/Identity received) */
  40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
  41 /** EAP method proposed by the server */
  42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
  43 /** EAP method selected */
  44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
  45 /** EAP peer certificate from TLS */
  46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
  47 /** EAP peer certificate alternative subject name component from TLS */
  48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
  49 /** EAP TLS certificate chain validation error */
  50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
  51 /** EAP status */
  52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
  53 /** EAP authentication completed successfully */
  54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
  55 /** EAP authentication failed (EAP-Failure received) */
  56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
  57 /** Network block temporarily disabled (e.g., due to authentication failure) */
  58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
  59 /** Temporarily disabled network block re-enabled */
  60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
  61 /** New scan started */
  62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
  63 /** New scan results available */
  64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
  65 /** Scan command failed */
  66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
  67 /** wpa_supplicant state change */
  68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
  69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
  70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
  71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
  72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
  73 /** No suitable network was found */
  74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
  75 /** Change in the signal level was reported by the driver */
  76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
  77 /** Beacon loss reported by the driver */
  78 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
  79 /** Regulatory domain channel */
  80 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
  81 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
  82 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
  83
  84 /** IP subnet status change notification
  85  *
  86  * When using an offloaded roaming mechanism where driver/firmware takes care
  87  * of roaming and IP subnet validation checks post-roaming, this event can
  88  * indicate whether IP subnet has changed.
  89  *
  90  * The event has a status=<0/1/2> parameter where
  91  * 0 = unknown
  92  * 1 = IP subnet unchanged (can continue to use the old IP address)
  93  * 2 = IP subnet changed (need to get a new IP address)
  94  */
  95 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
  96
  97 /** RSN IBSS 4-way handshakes completed with specified peer */
  98 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
  99
 100 /** Notification of frequency conflict due to a concurrent operation.
 101  *
 102  * The indicated network is disabled and needs to be re-enabled before it can
 103  * be used again.
 104  */
 105 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
 106 /** Frequency ranges that the driver recommends to avoid */
 107 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
 108 /** WPS overlap detected in PBC mode */
 109 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
 110 /** Available WPS AP with active PBC found in scan results */
 111 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
 112 /** Available WPS AP with our address as authorized in scan results */
 113 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
 114 /** Available WPS AP with recently selected PIN registrar found in scan results
 115  */
 116 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
 117 /** Available WPS AP found in scan results */
 118 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
 119 /** A new credential received */
 120 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
 121 /** M2D received */
 122 #define WPS_EVENT_M2D "WPS-M2D "
 123 /** WPS registration failed after M2/M2D */
 124 #define WPS_EVENT_FAIL "WPS-FAIL "
 125 /** WPS registration completed successfully */
 126 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
 127 /** WPS enrollment attempt timed out and was terminated */
 128 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
 129 /* PBC mode was activated */
 130 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
 131 /* PBC mode was disabled */
 132 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
 133
 134 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
 135
 136 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
 137
 138 /* WPS ER events */
 139 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
 140 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
 141 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
 142 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
 143 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
 144 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
 145
 146 /* DPP events */
 147 #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
 148 #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
 149 #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
 150 #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
 151 #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
 152 #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
 153 #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
 154 #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
 155 #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
 156 #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
 157 #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
 158
 159 /* MESH events */
 160 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
 161 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
 162 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
 163 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
 164 /** Mesh SAE authentication failure. Wrong password suspected. */
 165 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
 166 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
 167
 168 /* WMM AC events */
 169 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
 170 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
 171 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
 172
 173 /** P2P device found */
 174 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
 175
 176 /** P2P device lost */
 177 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
 178
 179 /** A P2P device requested GO negotiation, but we were not ready to start the
 180  * negotiation */
 181 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
 182 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
 183 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
 184 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
 185 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
 186 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
 187 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
 188 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
 189 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
 190 /* parameters: <peer address> <PIN> */
 191 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
 192 /* parameters: <peer address> */
 193 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
 194 /* parameters: <peer address> */
 195 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
 196 /* parameters: <peer address> */
 197 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
 198 /* parameters: <peer address> <status> */
 199 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
 200 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
 201 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
 202 /* parameters: <src addr> <update indicator> <TLVs> */
 203 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
 204 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
 205 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
 206 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
 207 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
 208 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
 209 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
 210 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
 211 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
 212 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
 213 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
 214 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
 215 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
 216
 217 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
 218 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
 219 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
 220
 221 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
 222 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
 223
 224 #define INTERWORKING_AP "INTERWORKING-AP "
 225 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
 226 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
 227 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
 228 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
 229
 230 /* Credential block added; parameters: <id> */
 231 #define CRED_ADDED "CRED-ADDED "
 232 /* Credential block modified; parameters: <id> <field> */
 233 #define CRED_MODIFIED "CRED-MODIFIED "
 234 /* Credential block removed; parameters: <id> */
 235 #define CRED_REMOVED "CRED-REMOVED "
 236
 237 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
 238 /* parameters: <addr> <dialog_token> <freq> */
 239 #define GAS_QUERY_START "GAS-QUERY-START "
 240 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
 241 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
 242
 243 /* parameters: <addr> <result> */
 244 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
 245
 246 #define RX_ANQP "RX-ANQP "
 247 #define RX_HS20_ANQP "RX-HS20-ANQP "
 248 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
 249 #define RX_HS20_ICON "RX-HS20-ICON "
 250 #define RX_MBO_ANQP "RX-MBO-ANQP "
 251
 252 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
 253 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
 254
 255 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
 256 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
 257
 258 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
 259 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
 260
 261 /* hostapd control interface - fixed message prefixes */
 262 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
 263 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
 264 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
 265 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
 266 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
 267 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
 268 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
 269 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
 270 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
 271 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
 272 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
 273
 274 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
 275 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
 276
 277 #define AP_EVENT_ENABLED "AP-ENABLED "
 278 #define AP_EVENT_DISABLED "AP-DISABLED "
 279
 280 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
 281 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
 282
 283 #define ACS_EVENT_STARTED "ACS-STARTED "
 284 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
 285 #define ACS_EVENT_FAILED "ACS-FAILED "
 286
 287 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
 288 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
 289 #define DFS_EVENT_CAC_START "DFS-CAC-START "
 290 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
 291 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
 292 #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
 293
 294 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
 295
 296 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
 297 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
 298
 299 /* BSS Transition Management Response frame received */
 300 #define BSS_TM_RESP "BSS-TM-RESP "
 301
 302 /* MBO IE with cellular data connection preference received */
 303 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
 304
 305 /* BSS Transition Management Request received with MBO transition reason */
 306 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
 307
 308 /* parameters: <STA address> <dialog token> <ack=0/1> */
 309 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
 310 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
 311 #define BEACON_RESP_RX "BEACON-RESP-RX "
 312
 313 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
 314 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
 315 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
 316 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
 317
 318 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
 319  */
 320 #define FILS_HLP_RX "FILS-HLP-RX "
 321
 322 /* BSS command information masks */
 323
 324 #define WPA_BSS_MASK_ALL                0xFFFDFFFF
 325 #define WPA_BSS_MASK_ID                 BIT(0)
 326 #define WPA_BSS_MASK_BSSID              BIT(1)
 327 #define WPA_BSS_MASK_FREQ               BIT(2)
 328 #define WPA_BSS_MASK_BEACON_INT         BIT(3)
 329 #define WPA_BSS_MASK_CAPABILITIES       BIT(4)
 330 #define WPA_BSS_MASK_QUAL               BIT(5)
 331 #define WPA_BSS_MASK_NOISE              BIT(6)
 332 #define WPA_BSS_MASK_LEVEL              BIT(7)
 333 #define WPA_BSS_MASK_TSF                BIT(8)
 334 #define WPA_BSS_MASK_AGE                BIT(9)
 335 #define WPA_BSS_MASK_IE                 BIT(10)
 336 #define WPA_BSS_MASK_FLAGS              BIT(11)
 337 #define WPA_BSS_MASK_SSID               BIT(12)
 338 #define WPA_BSS_MASK_WPS_SCAN           BIT(13)
 339 #define WPA_BSS_MASK_P2P_SCAN           BIT(14)
 340 #define WPA_BSS_MASK_INTERNETW          BIT(15)
 341 #define WPA_BSS_MASK_WIFI_DISPLAY       BIT(16)
 342 #define WPA_BSS_MASK_DELIM              BIT(17)
 343 #define WPA_BSS_MASK_MESH_SCAN          BIT(18)
 344 #define WPA_BSS_MASK_SNR                BIT(19)
 345 #define WPA_BSS_MASK_EST_THROUGHPUT     BIT(20)
 346 #define WPA_BSS_MASK_FST                BIT(21)
 347 #define WPA_BSS_MASK_UPDATE_IDX         BIT(22)
 348 #define WPA_BSS_MASK_BEACON_IE          BIT(23)
 349 #define WPA_BSS_MASK_FILS_INDICATION    BIT(24)
 350
 351
 352 /* VENDOR_ELEM_* frame id values */
 353 enum wpa_vendor_elem_frame {
 354         VENDOR_ELEM_PROBE_REQ_P2P = 0,
 355         VENDOR_ELEM_PROBE_RESP_P2P = 1,
 356         VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
 357         VENDOR_ELEM_BEACON_P2P_GO = 3,
 358         VENDOR_ELEM_P2P_PD_REQ = 4,
 359         VENDOR_ELEM_P2P_PD_RESP = 5,
 360         VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
 361         VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
 362         VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
 363         VENDOR_ELEM_P2P_INV_REQ = 9,
 364         VENDOR_ELEM_P2P_INV_RESP = 10,
 365         VENDOR_ELEM_P2P_ASSOC_REQ = 11,
 366         VENDOR_ELEM_P2P_ASSOC_RESP = 12,
 367         VENDOR_ELEM_ASSOC_REQ = 13,
 368         VENDOR_ELEM_PROBE_REQ = 14,
 369         NUM_VENDOR_ELEM_FRAMES
 370 };
 371
 372
 373 /* wpa_supplicant/hostapd control interface access */
 374
 375 /**
 376  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
 377  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
 378  * Returns: Pointer to abstract control interface data or %NULL on failure
 379  *
 380  * This function is used to open a control interface to wpa_supplicant/hostapd.
 381  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
 382  * is configured in wpa_supplicant/hostapd and other programs using the control
 383  * interface need to use matching path configuration.
 384  */
 385 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
 386
 387 /**
 388  * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
 389  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
 390  * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
 391  *            is used.
 392  * Returns: Pointer to abstract control interface data or %NULL on failure
 393  *
 394  * This function is used to open a control interface to wpa_supplicant/hostapd
 395  * when the socket path for client need to be specified explicitly. Default
 396  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
 397  * socket path is /tmp.
 398  */
 399 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
 400
 401
 402 /**
 403  * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
 404  * @ctrl: Control interface data from wpa_ctrl_open()
 405  *
 406  * This function is used to close a control interface.
 407  */
 408 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
 409
 410
 411 /**
 412  * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
 413  * @ctrl: Control interface data from wpa_ctrl_open()
 414  * @cmd: Command; usually, ASCII text, e.g., "PING"
 415  * @cmd_len: Length of the cmd in bytes
 416  * @reply: Buffer for the response
 417  * @reply_len: Reply buffer length
 418  * @msg_cb: Callback function for unsolicited messages or %NULL if not used
 419  * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
 420  *
 421  * This function is used to send commands to wpa_supplicant/hostapd. Received
 422  * response will be written to reply and reply_len is set to the actual length
 423  * of the reply. This function will block for up to two seconds while waiting
 424  * for the reply. If unsolicited messages are received, the blocking time may
 425  * be longer.
 426  *
 427  * msg_cb can be used to register a callback function that will be called for
 428  * unsolicited messages received while waiting for the command response. These
 429  * messages may be received if wpa_ctrl_request() is called at the same time as
 430  * wpa_supplicant/hostapd is sending such a message. This can happen only if
 431  * the program has used wpa_ctrl_attach() to register itself as a monitor for
 432  * event messages. Alternatively to msg_cb, programs can register two control
 433  * interface connections and use one of them for commands and the other one for
 434  * receiving event messages, in other words, call wpa_ctrl_attach() only for
 435  * the control interface connection that will be used for event messages.
 436  */
 437 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
 438                      char *reply, size_t *reply_len,
 439                      void (*msg_cb)(char *msg, size_t len));
 440
 441
 442 /**
 443  * wpa_ctrl_attach - Register as an event monitor for the control interface
 444  * @ctrl: Control interface data from wpa_ctrl_open()
 445  * Returns: 0 on success, -1 on failure, -2 on timeout
 446  *
 447  * This function registers the control interface connection as a monitor for
 448  * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
 449  * control interface connection starts receiving event messages that can be
 450  * read with wpa_ctrl_recv().
 451  */
 452 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
 453
 454
 455 /**
 456  * wpa_ctrl_detach - Unregister event monitor from the control interface
 457  * @ctrl: Control interface data from wpa_ctrl_open()
 458  * Returns: 0 on success, -1 on failure, -2 on timeout
 459  *
 460  * This function unregisters the control interface connection as a monitor for
 461  * wpa_supplicant/hostapd events, i.e., cancels the registration done with
 462  * wpa_ctrl_attach().
 463  */
 464 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
 465
 466
 467 /**
 468  * wpa_ctrl_recv - Receive a pending control interface message
 469  * @ctrl: Control interface data from wpa_ctrl_open()
 470  * @reply: Buffer for the message data
 471  * @reply_len: Length of the reply buffer
 472  * Returns: 0 on success, -1 on failure
 473  *
 474  * This function will receive a pending control interface message. The received
 475  * response will be written to reply and reply_len is set to the actual length
 476  * of the reply.
 477
 478  * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
 479  * must have been used to register the control interface as an event monitor.
 480  */
 481 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
 482
 483
 484 /**
 485  * wpa_ctrl_pending - Check whether there are pending event messages
 486  * @ctrl: Control interface data from wpa_ctrl_open()
 487  * Returns: 1 if there are pending messages, 0 if no, or -1 on error
 488  *
 489  * This function will check whether there are any pending control interface
 490  * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
 491  * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
 492  * register the control interface as an event monitor.
 493  */
 494 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
 495
 496
 497 /**
 498  * wpa_ctrl_get_fd - Get file descriptor used by the control interface
 499  * @ctrl: Control interface data from wpa_ctrl_open()
 500  * Returns: File descriptor used for the connection
 501  *
 502  * This function can be used to get the file descriptor that is used for the
 503  * control interface connection. The returned value can be used, e.g., with
 504  * select() while waiting for multiple events.
 505  *
 506  * The returned file descriptor must not be used directly for sending or
 507  * receiving packets; instead, the library functions wpa_ctrl_request() and
 508  * wpa_ctrl_recv() must be used for this.
 509  */
 510 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
 511
 512 #ifdef ANDROID
 513 /**
 514  * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
 515  * may be left over from clients that were previously connected to
 516  * wpa_supplicant. This keeps these files from being orphaned in the
 517  * event of crashes that prevented them from being removed as part
 518  * of the normal orderly shutdown.
 519  */
 520 void wpa_ctrl_cleanup(void);
 521 #endif /* ANDROID */
 522
 523 #ifdef CONFIG_CTRL_IFACE_UDP
 524 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
 525 #define WPA_CTRL_IFACE_PORT 9877
 526 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
 527 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
 528 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
 529
 530 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
 531 #endif /* CONFIG_CTRL_IFACE_UDP */
 532
 533
 534 #ifdef  __cplusplus
 535 }
 536 #endif
 537
 538 #endif /* WPA_CTRL_H */