]> git.ipfire.org Git - thirdparty/hostap.git/blob - src/common/wpa_ctrl.h
FILS: Parse and report received FILS HLP Containers from response
[thirdparty/hostap.git] / src / common / wpa_ctrl.h
1 /*
2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
4 *
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
7 */
8
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11
12 #ifdef __cplusplus
13 extern "C" {
14 #endif
15
16 /* wpa_supplicant control interface - fixed message prefixes */
17
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
20
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
23
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51 /** EAP status */
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** EAP authentication completed successfully */
54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
55 /** EAP authentication failed (EAP-Failure received) */
56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
57 /** Network block temporarily disabled (e.g., due to authentication failure) */
58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
59 /** Temporarily disabled network block re-enabled */
60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
61 /** New scan started */
62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
63 /** New scan results available */
64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
65 /** Scan command failed */
66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
67 /** wpa_supplicant state change */
68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
73 /** No suitable network was found */
74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
75 /** Change in the signal level was reported by the driver */
76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
77 /** Beacon loss reported by the driver */
78 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
79 /** Regulatory domain channel */
80 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
81 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
82 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
83
84 /** IP subnet status change notification
85 *
86 * When using an offloaded roaming mechanism where driver/firmware takes care
87 * of roaming and IP subnet validation checks post-roaming, this event can
88 * indicate whether IP subnet has changed.
89 *
90 * The event has a status=<0/1/2> parameter where
91 * 0 = unknown
92 * 1 = IP subnet unchanged (can continue to use the old IP address)
93 * 2 = IP subnet changed (need to get a new IP address)
94 */
95 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
96
97 /** RSN IBSS 4-way handshakes completed with specified peer */
98 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
99
100 /** Notification of frequency conflict due to a concurrent operation.
101 *
102 * The indicated network is disabled and needs to be re-enabled before it can
103 * be used again.
104 */
105 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
106 /** Frequency ranges that the driver recommends to avoid */
107 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
108 /** WPS overlap detected in PBC mode */
109 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
110 /** Available WPS AP with active PBC found in scan results */
111 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
112 /** Available WPS AP with our address as authorized in scan results */
113 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
114 /** Available WPS AP with recently selected PIN registrar found in scan results
115 */
116 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
117 /** Available WPS AP found in scan results */
118 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
119 /** A new credential received */
120 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
121 /** M2D received */
122 #define WPS_EVENT_M2D "WPS-M2D "
123 /** WPS registration failed after M2/M2D */
124 #define WPS_EVENT_FAIL "WPS-FAIL "
125 /** WPS registration completed successfully */
126 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
127 /** WPS enrollment attempt timed out and was terminated */
128 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
129 /* PBC mode was activated */
130 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
131 /* PBC mode was disabled */
132 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
133
134 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
135
136 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
137
138 /* WPS ER events */
139 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
140 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
141 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
142 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
143 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
144 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
145
146 /* MESH events */
147 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
148 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
149 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
150 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
151 /** Mesh SAE authentication failure. Wrong password suspected. */
152 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
153 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
154
155 /* WMM AC events */
156 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
157 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
158 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
159
160 /** P2P device found */
161 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
162
163 /** P2P device lost */
164 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
165
166 /** A P2P device requested GO negotiation, but we were not ready to start the
167 * negotiation */
168 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
169 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
170 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
171 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
172 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
173 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
174 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
175 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
176 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
177 /* parameters: <peer address> <PIN> */
178 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
179 /* parameters: <peer address> */
180 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
181 /* parameters: <peer address> */
182 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
183 /* parameters: <peer address> */
184 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
185 /* parameters: <peer address> <status> */
186 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
187 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
188 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
189 /* parameters: <src addr> <update indicator> <TLVs> */
190 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
191 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
192 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
193 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
194 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
195 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
196 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
197 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
198 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
199 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
200 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
201 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
202 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
203
204 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
205 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
206 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
207
208 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
209 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
210
211 #define INTERWORKING_AP "INTERWORKING-AP "
212 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
213 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
214 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
215 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
216
217 /* Credential block added; parameters: <id> */
218 #define CRED_ADDED "CRED-ADDED "
219 /* Credential block modified; parameters: <id> <field> */
220 #define CRED_MODIFIED "CRED-MODIFIED "
221 /* Credential block removed; parameters: <id> */
222 #define CRED_REMOVED "CRED-REMOVED "
223
224 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
225 /* parameters: <addr> <dialog_token> <freq> */
226 #define GAS_QUERY_START "GAS-QUERY-START "
227 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
228 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
229
230 /* parameters: <addr> <result> */
231 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
232
233 #define RX_ANQP "RX-ANQP "
234 #define RX_HS20_ANQP "RX-HS20-ANQP "
235 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
236 #define RX_HS20_ICON "RX-HS20-ICON "
237
238 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
239 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
240
241 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
242 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
243
244 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
245 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
246
247 /* hostapd control interface - fixed message prefixes */
248 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
249 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
250 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
251 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
252 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
253 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
254 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
255 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
256 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
257 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
258 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
259
260 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
261 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
262
263 #define AP_EVENT_ENABLED "AP-ENABLED "
264 #define AP_EVENT_DISABLED "AP-DISABLED "
265
266 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
267 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
268
269 #define ACS_EVENT_STARTED "ACS-STARTED "
270 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
271 #define ACS_EVENT_FAILED "ACS-FAILED "
272
273 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
274 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
275 #define DFS_EVENT_CAC_START "DFS-CAC-START "
276 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
277 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
278
279 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
280
281 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
282 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
283
284 /* BSS Transition Management Response frame received */
285 #define BSS_TM_RESP "BSS-TM-RESP "
286
287 /* MBO IE with cellular data connection preference received */
288 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
289
290 /* BSS Transition Management Request received with MBO transition reason */
291 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
292
293 /* parameters: <STA address> <dialog token> <ack=0/1> */
294 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
295 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
296 #define BEACON_RESP_RX "BEACON-RESP-RX "
297
298 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
299 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
300 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
301 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
302
303 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
304 */
305 #define FILS_HLP_RX "FILS-HLP-RX "
306
307 /* BSS command information masks */
308
309 #define WPA_BSS_MASK_ALL 0xFFFDFFFF
310 #define WPA_BSS_MASK_ID BIT(0)
311 #define WPA_BSS_MASK_BSSID BIT(1)
312 #define WPA_BSS_MASK_FREQ BIT(2)
313 #define WPA_BSS_MASK_BEACON_INT BIT(3)
314 #define WPA_BSS_MASK_CAPABILITIES BIT(4)
315 #define WPA_BSS_MASK_QUAL BIT(5)
316 #define WPA_BSS_MASK_NOISE BIT(6)
317 #define WPA_BSS_MASK_LEVEL BIT(7)
318 #define WPA_BSS_MASK_TSF BIT(8)
319 #define WPA_BSS_MASK_AGE BIT(9)
320 #define WPA_BSS_MASK_IE BIT(10)
321 #define WPA_BSS_MASK_FLAGS BIT(11)
322 #define WPA_BSS_MASK_SSID BIT(12)
323 #define WPA_BSS_MASK_WPS_SCAN BIT(13)
324 #define WPA_BSS_MASK_P2P_SCAN BIT(14)
325 #define WPA_BSS_MASK_INTERNETW BIT(15)
326 #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
327 #define WPA_BSS_MASK_DELIM BIT(17)
328 #define WPA_BSS_MASK_MESH_SCAN BIT(18)
329 #define WPA_BSS_MASK_SNR BIT(19)
330 #define WPA_BSS_MASK_EST_THROUGHPUT BIT(20)
331 #define WPA_BSS_MASK_FST BIT(21)
332 #define WPA_BSS_MASK_UPDATE_IDX BIT(22)
333 #define WPA_BSS_MASK_BEACON_IE BIT(23)
334 #define WPA_BSS_MASK_FILS_INDICATION BIT(24)
335
336
337 /* VENDOR_ELEM_* frame id values */
338 enum wpa_vendor_elem_frame {
339 VENDOR_ELEM_PROBE_REQ_P2P = 0,
340 VENDOR_ELEM_PROBE_RESP_P2P = 1,
341 VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
342 VENDOR_ELEM_BEACON_P2P_GO = 3,
343 VENDOR_ELEM_P2P_PD_REQ = 4,
344 VENDOR_ELEM_P2P_PD_RESP = 5,
345 VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
346 VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
347 VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
348 VENDOR_ELEM_P2P_INV_REQ = 9,
349 VENDOR_ELEM_P2P_INV_RESP = 10,
350 VENDOR_ELEM_P2P_ASSOC_REQ = 11,
351 VENDOR_ELEM_P2P_ASSOC_RESP = 12,
352 VENDOR_ELEM_ASSOC_REQ = 13,
353 VENDOR_ELEM_PROBE_REQ = 14,
354 NUM_VENDOR_ELEM_FRAMES
355 };
356
357
358 /* wpa_supplicant/hostapd control interface access */
359
360 /**
361 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
362 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
363 * Returns: Pointer to abstract control interface data or %NULL on failure
364 *
365 * This function is used to open a control interface to wpa_supplicant/hostapd.
366 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
367 * is configured in wpa_supplicant/hostapd and other programs using the control
368 * interface need to use matching path configuration.
369 */
370 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
371
372 /**
373 * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
374 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
375 * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
376 * is used.
377 * Returns: Pointer to abstract control interface data or %NULL on failure
378 *
379 * This function is used to open a control interface to wpa_supplicant/hostapd
380 * when the socket path for client need to be specified explicitly. Default
381 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
382 * socket path is /tmp.
383 */
384 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
385
386
387 /**
388 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
389 * @ctrl: Control interface data from wpa_ctrl_open()
390 *
391 * This function is used to close a control interface.
392 */
393 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
394
395
396 /**
397 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
398 * @ctrl: Control interface data from wpa_ctrl_open()
399 * @cmd: Command; usually, ASCII text, e.g., "PING"
400 * @cmd_len: Length of the cmd in bytes
401 * @reply: Buffer for the response
402 * @reply_len: Reply buffer length
403 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
404 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
405 *
406 * This function is used to send commands to wpa_supplicant/hostapd. Received
407 * response will be written to reply and reply_len is set to the actual length
408 * of the reply. This function will block for up to two seconds while waiting
409 * for the reply. If unsolicited messages are received, the blocking time may
410 * be longer.
411 *
412 * msg_cb can be used to register a callback function that will be called for
413 * unsolicited messages received while waiting for the command response. These
414 * messages may be received if wpa_ctrl_request() is called at the same time as
415 * wpa_supplicant/hostapd is sending such a message. This can happen only if
416 * the program has used wpa_ctrl_attach() to register itself as a monitor for
417 * event messages. Alternatively to msg_cb, programs can register two control
418 * interface connections and use one of them for commands and the other one for
419 * receiving event messages, in other words, call wpa_ctrl_attach() only for
420 * the control interface connection that will be used for event messages.
421 */
422 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
423 char *reply, size_t *reply_len,
424 void (*msg_cb)(char *msg, size_t len));
425
426
427 /**
428 * wpa_ctrl_attach - Register as an event monitor for the control interface
429 * @ctrl: Control interface data from wpa_ctrl_open()
430 * Returns: 0 on success, -1 on failure, -2 on timeout
431 *
432 * This function registers the control interface connection as a monitor for
433 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
434 * control interface connection starts receiving event messages that can be
435 * read with wpa_ctrl_recv().
436 */
437 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
438
439
440 /**
441 * wpa_ctrl_detach - Unregister event monitor from the control interface
442 * @ctrl: Control interface data from wpa_ctrl_open()
443 * Returns: 0 on success, -1 on failure, -2 on timeout
444 *
445 * This function unregisters the control interface connection as a monitor for
446 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
447 * wpa_ctrl_attach().
448 */
449 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
450
451
452 /**
453 * wpa_ctrl_recv - Receive a pending control interface message
454 * @ctrl: Control interface data from wpa_ctrl_open()
455 * @reply: Buffer for the message data
456 * @reply_len: Length of the reply buffer
457 * Returns: 0 on success, -1 on failure
458 *
459 * This function will receive a pending control interface message. The received
460 * response will be written to reply and reply_len is set to the actual length
461 * of the reply.
462
463 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
464 * must have been used to register the control interface as an event monitor.
465 */
466 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
467
468
469 /**
470 * wpa_ctrl_pending - Check whether there are pending event messages
471 * @ctrl: Control interface data from wpa_ctrl_open()
472 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
473 *
474 * This function will check whether there are any pending control interface
475 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
476 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
477 * register the control interface as an event monitor.
478 */
479 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
480
481
482 /**
483 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
484 * @ctrl: Control interface data from wpa_ctrl_open()
485 * Returns: File descriptor used for the connection
486 *
487 * This function can be used to get the file descriptor that is used for the
488 * control interface connection. The returned value can be used, e.g., with
489 * select() while waiting for multiple events.
490 *
491 * The returned file descriptor must not be used directly for sending or
492 * receiving packets; instead, the library functions wpa_ctrl_request() and
493 * wpa_ctrl_recv() must be used for this.
494 */
495 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
496
497 #ifdef ANDROID
498 /**
499 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
500 * may be left over from clients that were previously connected to
501 * wpa_supplicant. This keeps these files from being orphaned in the
502 * event of crashes that prevented them from being removed as part
503 * of the normal orderly shutdown.
504 */
505 void wpa_ctrl_cleanup(void);
506 #endif /* ANDROID */
507
508 #ifdef CONFIG_CTRL_IFACE_UDP
509 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
510 #define WPA_CTRL_IFACE_PORT 9877
511 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
512 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
513 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
514
515 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
516 #endif /* CONFIG_CTRL_IFACE_UDP */
517
518
519 #ifdef __cplusplus
520 }
521 #endif
522
523 #endif /* WPA_CTRL_H */