src/functions/functions.ipsec

   1 #!/bin/bash
   2 ###############################################################################
   3 #                                                                             #
   4 # IPFire.org - A linux based firewall                                         #
   5 # Copyright (C) 2017  IPFire Network Development Team                         #
   6 #                                                                             #
   7 # This program is free software: you can redistribute it and/or modify        #
   8 # it under the terms of the GNU General Public License as published by        #
   9 # the Free Software Foundation, either version 3 of the License, or           #
  10 # (at your option) any later version.                                         #
  11 #                                                                             #
  12 # This program is distributed in the hope that it will be useful,             #
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of              #
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
  15 # GNU General Public License for more details.                                #
  16 #                                                                             #
  17 # You should have received a copy of the GNU General Public License           #
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
  19 #                                                                             #
  20 ###############################################################################
  21
  22 IPSEC_CONNECTION_CONFIG_SETTINGS="AUTH_MODE INACTIVITY_TIMEOUT LOCAL_ID LOCAL_PREFIX"
  23 IPSEC_CONNECTION_CONFIG_SETTINGS="${IPSEC_CONNECTION_CONFIG_SETTINGS} MODE PEER PSK"
  24 IPSEC_CONNECTION_CONFIG_SETTINGS="${IPSEC_CONNECTION_CONFIG_SETTINGS} REMOTE_ID REMOTE_PREFIX"
  25 IPSEC_CONNECTION_CONFIG_SETTINGS="${IPSEC_CONNECTION_CONFIG_SETTINGS} SECURITY_POLICY"
  26
  27 # Default values
  28 IPSEC_DEFAULT_MODE="tunnel"
  29 IPSEC_DEFAULT_AUTH_MODE="PSK"
  30 IPSEC_DEFAULT_INACTIVITY_TIMEOUT="0"
  31 IPSEC_DEFAULT_SECURITY_POLICY="system"
  32
  33 IPSEC_VALID_MODES="gre-transport tunnel vti"
  34 IPSEC_VALID_AUTH_MODES="PSK"
  35
  36 cli_ipsec() {
  37         local action=${1}
  38         shift 1
  39
  40         case "${action}" in
  41                 connection)
  42                         cli_ipsec_connection $@
  43                         ;;
  44                 *)
  45                         error "Unrecognized argument: ${action}"
  46                         exit ${EXIT_ERROR}
  47                         ;;
  48         esac
  49 }
  50
  51 cli_ipsec_connection() {
  52         if ipsec_connection_exists ${1}; then
  53                 local connection=${1}
  54                 local key=${2}
  55                 key=${key//-/_}
  56                 shift 2
  57
  58                 case "${key}" in
  59                         authentication|inactivity_timeout|local|mode|peer|remote|security_policy)
  60                                 ipsec_connection_${key} ${connection} $@
  61                                 ;;
  62                         show)
  63                                 cli_ipsec_connection_show "${connection}"
  64                                 exit $?
  65                                 ;;
  66                         *)
  67                                 error "Unrecognized argument: ${key}"
  68                                 exit ${EXIT_ERROR}
  69                                 ;;
  70                 esac
  71         else
  72                 local action=${1}
  73                 shift
  74
  75                 case "${action}" in
  76                         new)
  77                                 ipsec_connection_new $@
  78                                 ;;
  79                         destroy)
  80                                 ipsec_connection_destroy $@
  81                                 ;;
  82                         ""|*)
  83                                 if [ -n "${action}" ]; then
  84                                         error "Unrecognized argument: '${action}'"
  85                                 fi
  86                                 exit ${EXIT_ERROR}
  87                                 ;;
  88                 esac
  89         fi
  90 }
  91
  92 cli_ipsec_connection_show() {
  93         local connection="${1}"
  94
  95         # Read the config settings
  96         local ${IPSEC_CONNECTION_CONFIG_SETTINGS}
  97         if ! ipsec_connection_read_config "${connection}"; then
  98                 error "Could not read the connection configuration"
  99                 return ${EXIT_ERROR}
 100         fi
 101
 102         cli_headline 0 "IPsec VPN Connection: ${connection}"
 103         cli_space
 104
 105         # Peer
 106         if isset PEER; then
 107                 cli_print_fmt1 1 "Peer" "${PEER}"
 108         fi
 109
 110         # Security Policy
 111         cli_print_fmt1 1 "Security Policy" "${SECURITY_POLICY-${IPSEC_DEFAULT_SECURITY_POLICY}}"
 112         cli_space
 113
 114         cli_headline 2 "Authentication"
 115         case "${AUTH_MODE^^}" in
 116                 PSK)
 117                         cli_print_fmt1 2 "Mode" "Pre-Shared-Key"
 118
 119                         if isset PSK; then
 120                                 cli_print_fmt1 2 "Pre-Shared-Key" "****"
 121                         else
 122                                 cli_print_fmt1 2 "Pre-Shared-Key" "- is not set -"
 123                         fi
 124                         ;;
 125                 X509)
 126                         : # TODO
 127                         ;;
 128         esac
 129         cli_space
 130
 131         local i
 132         for i in LOCAL REMOTE; do
 133                 case "${i}" in
 134                         LOCAL)
 135                                 cli_headline 2 "Local"
 136                                 ;;
 137                         REMOTE)
 138                                 cli_headline 2 "Remote"
 139                                 ;;
 140                 esac
 141
 142                 local id_var="${i}_ID"
 143                 if [ -n "${!id_var}" ]; then
 144                         cli_print_fmt1 2 "ID" "${!id_var}"
 145                 fi
 146
 147                 local prefix_var="${i}_PREFIX"
 148                 if isset ${prefix_var}; then
 149                         cli_headline 3 "Prefix(es)"
 150
 151                         local prefix
 152                         for prefix in ${!prefix_var}; do
 153                                 cli_print_fmt1 3 "${prefix}"
 154                         done
 155                 fi
 156
 157                 cli_space
 158         done
 159
 160         cli_headline 2 "Misc."
 161
 162         case "${MODE}" in
 163                 gre-transport)
 164                         cli_print_fmt1 2 "Transport Mode" "GRE Transport"
 165                         ;;
 166                 tunnel)
 167                         cli_print_fmt1 2 "Transport Mode" "Tunnel"
 168                         ;;
 169                 vti)
 170                         cli_print_fmt1 2 "Transport Mode" "Virtual Tunnel Interface"
 171                         ;;
 172                 *)
 173                         cli_print_fmt1 2 "Transport Mode" "- Unknown -"
 174                         ;;
 175         esac
 176
 177         # Inactivity timeout
 178         if isset INACTIVITY_TIMEOUT && [ ${INACTIVITY_TIMEOUT} -gt 0 ]; then
 179                 cli_print_fmt1 2 "Inactivity Timeout" "$(format_time ${INACTIVITY_TIMEOUT})"
 180         fi
 181         cli_space
 182
 183         return ${EXIT_OK}
 184 }
 185
 186 # This function writes all values to a via ${connection} specificated VPN IPsec configuration file
 187 ipsec_connection_write_config() {
 188         assert [ $# -ge 1 ]
 189
 190         local connection="${1}"
 191
 192         if ! ipsec_connection_exists "${connection}"; then
 193                 log ERROR "No such VPN IPsec connection: ${connection}"
 194                 return ${EXIT_ERROR}
 195         fi
 196
 197         local path="${NETWORK_IPSEC_CONNS_DIR}/${connection}/settings"
 198
 199         if ! settings_write "${path}" ${IPSEC_CONNECTION_CONFIG_SETTINGS}; then
 200                 log ERROR "Could not write configuration settings for VPN IPsec connection ${connection}"
 201                 return ${EXIT_ERROR}
 202         fi
 203
 204         ipsec_reload ${connection}
 205 }
 206
 207 # This funtion writes the value for one key to a via ${connection} specificated VPN IPsec connection configuration file
 208 ipsec_connection_write_config_key() {
 209         assert [ $# -ge 3 ]
 210
 211         local connection=${1}
 212         local key=${2}
 213         shift 2
 214
 215         local value="$@"
 216
 217         if ! ipsec_connection_exists "${connection}"; then
 218                 log ERROR "No such VPN ipsec connection: ${connection}"
 219                 return ${EXIT_ERROR}
 220         fi
 221
 222         log DEBUG "Set '${key}' to new value '${value}' in VPN ipsec connection '${connection}'"
 223
 224         local ${IPSEC_CONNECTION_CONFIG_SETTINGS}
 225
 226         # Read the config settings
 227         if ! ipsec_connection_read_config "${connection}"; then
 228                 return ${EXIT_ERROR}
 229         fi
 230
 231         # Set the key to a new value
 232         assign "${key}" "${value}"
 233
 234         if ! ipsec_connection_write_config "${connection}"; then
 235                 return ${EXIT_ERROR}
 236         fi
 237
 238         return ${EXIT_TRUE}
 239 }
 240
 241 # Reads one or more keys out of a settings file or all if no key is provided.
 242 ipsec_connection_read_config() {
 243         assert [ $# -ge 1 ]
 244
 245         local connection="${1}"
 246         shift 1
 247
 248         if ! ipsec_connection_exists "${connection}"; then
 249                 log ERROR "No such VPN IPsec connection : ${connection}"
 250                 return ${EXIT_ERROR}
 251         fi
 252
 253
 254         local args
 255         if [ $# -eq 0 ] && [ -n "${IPSEC_CONNECTION_CONFIG_SETTINGS}" ]; then
 256                 list_append args ${IPSEC_CONNECTION_CONFIG_SETTINGS}
 257         else
 258                 list_append args $@
 259         fi
 260
 261         local path="${NETWORK_IPSEC_CONNS_DIR}/${connection}/settings"
 262
 263         if ! settings_read "${path}" ${args}; then
 264                 log ERROR "Could not read settings for VPN IPsec connection ${connection}"
 265                 return ${EXIT_ERROR}
 266         fi
 267 }
 268
 269 # This function checks if a vpn ipsec connection exists
 270 # Returns True when yes and false when not
 271 ipsec_connection_exists() {
 272         assert [ $# -eq 1 ]
 273
 274         local connection=${1}
 275
 276         local path="${NETWORK_IPSEC_CONNS_DIR}/${connection}"
 277
 278         [ -d "${path}" ] && return ${EXIT_TRUE} || return ${EXIT_FALSE}
 279 }
 280
 281 # Reloads the connection after config changes
 282 ipsec_reload() {
 283         return ${EXIT_TRUE}
 284 }
 285
 286 # Handle the cli after authentification
 287 ipsec_connection_authentication() {
 288         if [ ! $# -gt 1 ]; then
 289                 log ERROR "Not enough arguments"
 290                 return ${EXIT_ERROR}
 291         fi
 292
 293         local connection=${1}
 294         local cmd=${2}
 295         shift 2
 296
 297         case ${cmd} in
 298                 mode)
 299                         ipsec_connection_authentication_mode "${connection}" $@
 300                         ;;
 301                 pre-shared-key)
 302                         ipsec_connection_authentication_psk "${connection}" $@
 303                         ;;
 304                 *)
 305                         log ERROR "Unrecognized argument: ${cmd}"
 306                         return ${EXIT_ERROR}
 307                         ;;
 308         esac
 309 }
 310
 311 # Set the authentification mode
 312 ipsec_connection_authentication_mode() {
 313         if [ ! $# -eq 2 ]; then
 314                 log ERROR "Not enough arguments"
 315                 return ${EXIT_ERROR}
 316         fi
 317         local connection=${1}
 318         local mode=${2}
 319
 320         if ! isoneof mode ${IPSEC_VALID_AUTH_MODES}; then
 321                 log ERROR "Auth mode '${mode}' is invalid"
 322                 return ${EXIT_ERROR}
 323         fi
 324
 325         if ! ipsec_connection_write_config_key "${connection}" "AUTH_MODE" ${mode^^}; then
 326                 log ERROR "Could not write configuration settings"
 327                 return ${EXIT_ERROR}
 328         fi
 329 }
 330
 331 # Set the psk
 332 ipsec_connection_authentication_psk() {
 333         if [ ! $# -eq 2 ]; then
 334                 log ERROR "Not enough arguments"
 335                 return ${EXIT_ERROR}
 336         fi
 337
 338         local connection=${1}
 339         local psk=${2}
 340
 341         local length=${#psk}
 342
 343         if [ ${length} -lt 4 ]; then
 344                 error "The PSK must be longer than four characters"
 345                 return ${EXIT_ERROR}
 346         fi
 347
 348         if [ ${length} -gt 128 ]; then
 349                 error "The PSK cannot be longer than 128 characters"
 350                 return ${EXIT_ERROR}
 351         fi
 352
 353         if ! ipsec_connection_write_config_key "${connection}" "PSK" "${psk}"; then
 354                 log ERROR "Could not write configuration settings"
 355                 return ${EXIT_ERROR}
 356         fi
 357
 358         return ${EXIT_OK}
 359 }
 360
 361 # Handle the cli after local
 362 ipsec_connection_local() {
 363         if [ ! $# -ge 2 ]; then
 364                 log ERROR "Not enough arguments"
 365                 return ${EXIT_ERROR}
 366         fi
 367
 368         local connection=${1}
 369         local cmd=${2}
 370         shift 2
 371
 372         case ${cmd} in
 373                 id)
 374                         ipsec_connection_id "${connection}" "LOCAL" $@
 375                         ;;
 376                 prefix)
 377                         ipsec_connection_prefix "${connection}" "LOCAL" $@
 378                         ;;
 379                 *)
 380                         log ERROR "Unrecognized argument: ${cmd}"
 381                         return ${EXIT_ERROR}
 382                         ;;
 383         esac
 384
 385         return ${EXIT_OK}
 386 }
 387
 388 # Set the connection mode
 389 ipsec_connection_mode() {
 390         if [ ! $# -eq 2 ]; then
 391                 log ERROR "Not enough arguments"
 392                 return ${EXIT_ERROR}
 393         fi
 394         local connection=${1}
 395         local mode=${2}
 396
 397         if ! isoneof mode ${IPSEC_VALID_MODES}; then
 398                 log ERROR "Mode '${mode}' is invalid"
 399                 return ${EXIT_ERROR}
 400         fi
 401
 402         if ! ipsec_connection_write_config_key "${connection}" "MODE" ${mode}; then
 403                 log ERROR "Could not write configuration settings"
 404                 return ${EXIT_ERROR}
 405         fi
 406
 407         return ${EXIT_OK}
 408 }
 409
 410 # Set the peer to connect to
 411 ipsec_connection_peer() {
 412         if [ ! $# -eq 2 ]; then
 413                 log ERROR "Not enough arguments"
 414                 return ${EXIT_ERROR}
 415         fi
 416         local connection=${1}
 417         local peer=${2}
 418
 419         if ! ipsec_connection_check_peer ${peer}; then
 420                 log ERROR "Peer '${peer}' is invalid"
 421                 return ${EXIT_ERROR}
 422         fi
 423
 424         if ! ipsec_connection_write_config_key "${connection}" "PEER" ${peer}; then
 425                 log ERROR "Could not write configuration settings"
 426                 return ${EXIT_ERROR}
 427         fi
 428
 429         return ${EXIT_OK}
 430 }
 431
 432 #Set the local or remote id
 433 ipsec_connection_id() {
 434         if [ ! $# -eq 3 ]; then
 435                 log ERROR "Not enough arguments"
 436                 return ${EXIT_ERROR}
 437         fi
 438         local connection=${1}
 439         local type=${2}
 440         local id=${3}
 441
 442         if ! ipsec_connection_check_id ${id}; then
 443                 log ERROR "Id '${id}' is invalid"
 444                 return ${EXIT_ERROR}
 445         fi
 446
 447         if ! ipsec_connection_write_config_key "${connection}" "${type}_ID" ${id}; then
 448                 log ERROR "Could not write configuration settings"
 449                 return ${EXIT_ERROR}
 450         fi
 451
 452         return ${EXIT_OK}
 453 }
 454
 455 # Set the local or remote prefix
 456 ipsec_connection_prefix() {
 457         if [ ! $# -ge 3 ]; then
 458                 log ERROR "Not enough arguments"
 459                 return ${EXIT_ERROR}
 460         fi
 461         local connection=${1}
 462         local type=${2}
 463         shift 2
 464
 465         local _prefix="${type}_PREFIX"
 466         local "${_prefix}"
 467         if ! ipsec_connection_read_config "${connection}" "${_prefix}"; then
 468                 return ${EXIT_ERROR}
 469         fi
 470
 471         # Remove duplicated entries to proceed the list safely
 472         assign "${_prefix}" "$(list_unique ${!_prefix} )"
 473
 474         local prefixes_added
 475         local prefixes_removed
 476         local prefixes_set
 477
 478         while [ $# -gt 0 ]; do
 479                 local arg="${1}"
 480
 481                 case "${arg}" in
 482                         +*)
 483                                 list_append prefixes_added "${arg:1}"
 484                                 ;;
 485                         -*)
 486                                 list_append prefixes_removed "${arg:1}"
 487                                 ;;
 488                         [A-Fa-f0-9]*)
 489                                 list_append prefixes_set "${arg}"
 490                                 ;;
 491                         *)
 492                                 error "Invalid argument: ${arg}"
 493                                 return ${EXIT_ERROR}
 494                                 ;;
 495                 esac
 496                 shift
 497         done
 498
 499         # Check if the user is trying a mixed operation
 500         if ! list_is_empty prefixes_set && (! list_is_empty prefixes_added || ! list_is_empty prefixes_removed); then
 501                 error "You cannot reset the prefix list and add or remove prefixes at the same time"
 502                 return ${EXIT_ERROR}
 503         fi
 504
 505         # Set new prefix list
 506         if ! list_is_empty prefixes_set; then
 507                 # Check if all prefixes are valid
 508                 local prefix
 509                 for prefix in ${prefixes_set}; do
 510                         if ! ip_net_is_valid ${prefix}; then
 511                                 error "Unsupported prefix: ${prefix}"
 512                                 return ${EXIT_ERROR}
 513                         fi
 514                 done
 515
 516                 assign "${_prefix}" "${prefixes_set}"
 517
 518         # Perform incremental updates
 519         else
 520                 local prefix
 521
 522                 # Perform all removals
 523                 for prefix in ${prefixes_removed}; do
 524                         if ! list_remove "${_prefix}" ${prefix}; then
 525                                 warning "${prefix} was not on the list and could not be removed"
 526                         fi
 527                 done
 528
 529
 530                 for prefix in ${prefixes_added}; do
 531                         if ip_net_is_valid ${prefix}; then
 532                                 if ! list_append_unique "${_prefix}" ${prefix}; then
 533                                         warning "${prefix} is already on the prefix list"
 534                                 fi
 535                         else
 536                                 warning "${prefix} is not a valid IP network and could not be added"
 537                         fi
 538                 done
 539         fi
 540
 541         # Check if the list contain at least one valid prefix
 542         if list_is_empty ${_prefix}; then
 543                 error "Cannot save an empty prefix list"
 544                 return ${EXIT_ERROR}
 545         fi
 546
 547         # Save everything
 548         if ! ipsec_connection_write_config_key "${connection}" "${_prefix}" ${!_prefix}; then
 549                 log ERROR "Could not write configuration settings"
 550         fi
 551
 552         return ${EXIT_OK}
 553 }
 554
 555 # Handle the cli after remote
 556 ipsec_connection_remote() {
 557         if [ ! $# -ge 2 ]; then
 558                 log ERROR "Not enough arguments"
 559                 return ${EXIT_ERROR}
 560         fi
 561
 562         local connection=${1}
 563         local cmd=${2}
 564         shift 2
 565
 566         case ${cmd} in
 567                 id)
 568                         ipsec_connection_id "${connection}" "REMOTE" $@
 569                         ;;
 570
 571                 prefix)
 572                         ipsec_connection_prefix "${connection}" "REMOTE" $@
 573                         ;;
 574                 *)
 575                         log ERROR "Unrecognized argument: ${cmd}"
 576                         return ${EXIT_ERROR}
 577                         ;;
 578         esac
 579
 580         return ${EXIT_OK}
 581 }
 582
 583 # Set the inactivity timeout
 584 ipsec_connection_inactivity_timeout() {
 585         if [ ! $# -ge 2 ]; then
 586                 log ERROR "Not enough arguments"
 587                 return ${EXIT_ERROR}
 588         fi
 589
 590         local connection=${1}
 591         shift 1
 592         local value=$@
 593
 594         if ! isinteger value; then
 595                 value=$(parse_time $@)
 596                 if [ ! $? -eq 0 ]; then
 597                         log ERROR "Parsing the passed time was not sucessful please check the passed values."
 598                         return ${EXIT_ERROR}
 599                 fi
 600         fi
 601
 602         if [ ${value} -le 0 ]; then
 603                 log ERROR "The passed time value must be in the sum greater zero seconds."
 604                 return ${EXIT_ERROR}
 605         fi
 606
 607         if ! ipsec_connection_write_config_key "${connection}" "INACTIVITY_TIMEOUT" ${value}; then
 608                 log ERROR "Could not write configuration settings"
 609                 return ${EXIT_ERROR}
 610         fi
 611
 612         return ${EXIT_OK}
 613 }
 614
 615
 616 # Set the security policy to use
 617 ipsec_connection_security_policy() {
 618         if [ ! $# -eq 2 ]; then
 619                 log ERROR "Not enough arguments"
 620                 return ${EXIT_ERROR}
 621         fi
 622         local connection=${1}
 623         local security_policy=${2}
 624
 625         if ! vpn_security_policy_exists ${security_policy}; then
 626                 log ERROR "No such vpn security policy '${security_policy}'"
 627                 return ${EXIT_ERROR}
 628         fi
 629
 630         if ! ipsec_connection_write_config_key "${connection}" "SECURITY_POLICY" ${security_policy}; then
 631                 log ERROR "Could not write configuration settings"
 632                 return ${EXIT_ERROR}
 633         fi
 634 }
 635
 636 # Check if a id is valid
 637 ipsec_connection_check_id() {
 638         assert [ $# -eq 1 ]
 639         local id=${1}
 640
 641         if [[ ${id} =~ ^@[[:alnum:]]+$ ]] || ip_is_valid ${id}; then
 642                 return ${EXIT_TRUE}
 643         else
 644                 return ${EXIT_FALSE}
 645         fi
 646 }
 647
 648 # Checks if a peer is valid
 649 ipsec_connection_check_peer() {
 650         assert [ $# -eq 1 ]
 651         local peer=${1}
 652
 653         # TODO Accept also FQDNs
 654         if ip_is_valid ${peer}; then
 655                 return ${EXIT_TRUE}
 656         else
 657                 return ${EXIT_FALSE}
 658         fi
 659 }
 660
 661 # This function checks if a VPN IPsec connection name is valid
 662 # Allowed are only A-Za-z0-9
 663 ipsec_connection_check_name() {
 664         assert [ $# -eq 1 ]
 665
 666         local connection=${1}
 667
 668         [[ "${connection}" =~ [^[:alnum:]$] ]]
 669 }
 670
 671 # Function that creates one VPN IPsec connection
 672 ipsec_connection_new() {
 673         if [ $# -gt 1 ]; then
 674                 error "Too many arguments"
 675                 return ${EXIT_ERROR}
 676         fi
 677
 678         local connection="${1}"
 679         if ! isset connection; then
 680                 error "Please provide a connection name"
 681                 return ${EXIT_ERROR}
 682         fi
 683
 684         # Check for duplicates
 685         if ipsec_connection_exists "${connection}"; then
 686                 error "The VPN IPsec connection ${connection} already exists"
 687                 return ${EXIT_ERROR}
 688         fi
 689
 690         # Check if the name of the connection is valid
 691         if  ipsec_connection_check_name "${connection}"; then
 692                 error "'${connection}' contains illegal characters"
 693                 return ${EXIT_ERROR}
 694         fi
 695
 696         log DEBUG "Creating VPN IPsec connection ${connection}"
 697
 698         if ! mkdir -p "${NETWORK_IPSEC_CONNS_DIR}/${connection}"; then
 699                 log ERROR "Could not create config directory for ${connection}"
 700                 return ${EXIT_ERROR}
 701         fi
 702
 703         local ${IPSEC_CONNECTION_CONFIG_SETTINGS}
 704
 705         MODE=${IPSEC_DEFAULT_MODE}
 706         AUTH_MODE=${IPSEC_DEFAULT_AUTH_MODE}
 707         INACTIVITY_TIMEOUT=${IPSEC_DEFAULT_INACTIVITY_TIMEOUT}
 708         SECURITY_POLICY=${IPSEC_DEFAULT_SECURITY_POLICY}
 709
 710         if ! ipsec_connection_write_config "${connection}"; then
 711                 log ERROR "Could not write new config file"
 712                 return ${EXIT_ERROR}
 713         fi
 714 }
 715
 716 # Function that deletes based on the passed parameters one ore more vpn security policies
 717 ipsec_connection_destroy() {
 718         local connection
 719         for connection in $@; do
 720                 if ! ipsec_connection_exists "${connection}"; then
 721                         log ERROR "The VPN IPsec connection ${connection} does not exist."
 722                         continue
 723                 fi
 724
 725                 log DEBUG "Deleting VPN IPsec connection ${connection}"
 726                 if ! rm -rf "${NETWORK_IPSEC_CONNS_DIR}/${connection}"; then
 727                         log ERROR "Deleting the VPN IPsec connection ${connection} was not sucessful"
 728                         return ${EXIT_ERROR}
 729                 fi
 730         done
 731 }
 732
 733 # List all ipsec connections
 734 ipsec_list_connections() {
 735         local connection
 736         for connection in ${NETWORK_IPSEC_CONNS_DIR}/*; do
 737                 [ -d ${connection} ] || continue
 738                 basename ${connection}
 739         done
 740 }
 741
 742 ipsec_connection_to_strongswan() {
 743         local connection="${1}"
 744
 745         # Read the config settings
 746         local ${IPSEC_CONNECTION_CONFIG_SETTINGS}
 747         if ! ipsec_connection_read_config "${connection}"; then
 748                 error "Could not read the connection ${connection}"
 749                 return ${EXIT_ERROR}
 750         fi
 751
 752         local path="${NETWORK_IPSEC_SWANCTL_CONNECTIONS_DIR}/${connection}.conf"
 753
 754         (
 755                 # Write the connection section
 756                 _ipsec_connection_to_strongswan_connection "${connection}"
 757
 758                 # Write the secrets section
 759                 _ipsec_connection_to_strongswan_secrets "${connection}"
 760
 761         ) > ${path}
 762 }
 763
 764 _ipsec_connection_to_strongswan_connection() {
 765         local connection="${1}"
 766
 767         # Read the security policy
 768         local ${VPN_SECURITY_POLICIES_CONFIG_SETTINGS}
 769         if ! vpn_security_policies_read_config "${SECURITY_POLICY}"; then
 770                 return ${EXIT_ERROR}
 771         fi
 772
 773         print_indent 0 "connections {"
 774         print_indent 1 "${connection} {"
 775
 776         # IKE Version
 777         print_indent 2 "# IKE Version"
 778         case "${KEY_EXCHANGE^^}" in
 779                 IKEV1)
 780                         print_indent 2 "version = 1"
 781                         ;;
 782
 783                 # Fall back to IKEv2 for any random values
 784                 IKEV2|*)
 785                         print_indent 2 "version = 2"
 786                         ;;
 787         esac
 788         print # empty line
 789
 790         # Local Address
 791         print_indent 2 "# Local Address"
 792         if isset LOCAL_ADDRESS; then
 793                 print_indent 2 "local_addrs = ${LOCAL_ADDRESS}"
 794         else
 795                 print_indent 2 "local_addrs = %any"
 796         fi
 797         print
 798
 799         # Remote Address
 800         print_indent 2 "# Remote Address"
 801         if isset PEER; then
 802                 print_indent 2 "remote_addrs = ${PEER}"
 803         else
 804                 print_indent 2 "remote_addrs = %any"
 805         fi
 806         print
 807
 808         # IKE Proposals
 809         print_indent 2 "# IKE Proposals"
 810         print_indent 2 "proposals = $(vpn_security_policies_make_ah_proposal ${SECURITY_POLICY})"
 811         print
 812
 813         # XXX DPD Settings
 814
 815         # Fragmentation
 816         print_indent 2 "# Fragmentation"
 817         print_indent 2 "fragmentation = yes"
 818         print
 819
 820         # Local
 821         print_indent 2 "local {"
 822
 823         # Local ID
 824         if isset LOCAL_ID; then
 825                 print_indent 3 "id = ${LOCAL_ID}"
 826         fi
 827
 828         # Authentication
 829         case "${AUTH_MODE}" in
 830                 PSK)
 831                         print_indent 3 "auth = psk"
 832                         ;;
 833         esac
 834
 835         print_indent 2 "}"
 836         print
 837
 838         # Remote
 839         print_indent 2 "remote {"
 840
 841         # Remote ID
 842         if isset REMOTE_ID; then
 843                 print_indent 3 "id = ${REMOTE_ID}"
 844         fi
 845
 846         # Authentication
 847         case "${AUTH_MODE}" in
 848                 PSK)
 849                         print_indent 3 "auth = psk"
 850                         ;;
 851         esac
 852
 853         print_indent 2 "}"
 854         print
 855
 856         # Children
 857
 858         print_indent 2 "children {"
 859         print_indent 3 "${connection} {"
 860
 861         print_indent 4 "# ESP Proposals"
 862         print_indent 4 "esp_proposals = $(vpn_security_policies_make_esp_proposal ${SECURITY_POLICY})"
 863         print
 864
 865         # Traffic Selectors
 866
 867         # Local Prefixes
 868         if isset LOCAL_PREFIX; then
 869                 print_indent 4 "local_ts = $(list_join LOCAL_PREFIX ,)"
 870         else
 871                 print_indent 4 "local_ts = dynamic"
 872         fi
 873
 874         # Remote Prefixes
 875         if isset REMOTE_PREFIX; then
 876                 print_indent 4 "remote_ts = $(list_join REMOTE_PREFIX ,)"
 877         else
 878                 print_indent 4 "remote_ts = dynamic"
 879         fi
 880         print
 881
 882         # Rekeying
 883         if isset LIFETIME; then
 884                 print_indent 4 "# Rekey Time"
 885                 print_indent 4 "rekey_time = ${LIFETIME}"
 886                 print
 887         fi
 888
 889         # Updown Script
 890         print_indent 4 "updown = ${NETWORK_HELPERS_DIR}/ipsec-updown"
 891         print
 892
 893         # Mode
 894         print_indent 4 "# Mode"
 895         case "${MODE}" in
 896                 gre-transport)
 897                         print_indent 4 "mode = transport"
 898                         ;;
 899                 tunnel|vti|*)
 900                         print_indent 4 "mode = tunnel"
 901                         ;;
 902         esac
 903         print
 904
 905         # Compression
 906         print_indent 4 "# Compression"
 907         if enabled COMPRESSION; then
 908                 print_indent 4 "ipcomp = yes"
 909         else
 910                 print_indent 4 "ipcomp = no"
 911         fi
 912         print
 913
 914         # Inactivity Timeout
 915         if isset INACTIVITY_TIMEOUT; then
 916                 print_indent 4 "# Inactivity Timeout"
 917                 print_indent 4 "inactivity = ${INACTIVITY_TIMEOUT}"
 918                 print
 919         fi
 920
 921         # XXX Always-On
 922         print_indent 4 "start_action = start"
 923         print_indent 4 "close_action = start"
 924
 925         print_indent 3 "}"
 926         print_indent 2 "}"
 927         print
 928
 929         print_indent 1 "}"
 930         print_indent 0 "}"
 931         print
 932 }
 933
 934 _ipsec_connection_to_strongswan_secrets() {
 935         local connection="${1}"
 936
 937         print_indent 0 "secrets {"
 938
 939         case "${AUTH_MODE}" in
 940                 PSK)
 941                         print_indent 1 "ike {"
 942
 943                         # Secret
 944                         print_indent 2 "secret = ${PSK}"
 945
 946                         # ID
 947                         if isset REMOTE_ID; then
 948                                 print_indent 2 "id = ${REMOTE_ID}"
 949                         fi
 950
 951                         print_indent 1 "}"
 952                         ;;
 953         esac
 954
 955         print_indent 0 "}"
 956 }