# Makefile for GNU binary-file utilities
# Copyright (C) 1992, 1993 Free Software Foundation, Inc.

# This file is part of GNU binutils.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

srcdir = .

prefix = /usr/local

program_transform_name =
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
tooldir = $(exec_prefix)/$(target_alias)

datadir = $(prefix)/lib
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc

SHELL = /bin/sh

INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
INSTALL_XFORM = $(INSTALL) -t='$(program_tranform_name)'
INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1

AR = ar
AR_FLAGS = qv
CFLAGS = -g
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
RANLIB = ranlib
BISONFLAGS = -d
TEXI2ROFF=texi2roff

NM_FOR_TARGET = nm
NM = $(NM_FOR_TARGET)
SYMLINK = ln -s

BISON = `if [ -f ../byacc/byacc ] ; then echo ../byacc/byacc ; else echo byacc ; fi`
# Comment these out if using lex.
LEX_OPTIONS = -I -Cem 
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`

# Distribution version
VERSION=2.2
# Distribution name
DIST_NAME=binutils-${VERSION}

version=`./../gcc/gcc -dumpversion`

# Where to find texinfo.tex to format docn with TeX
TEXIDIR = $(srcdir)/../texinfo/fsf

MANPAGES= ar nm objdump ranlib size strings strip c++filt objcopy

#CC=gcc -Wall
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib

# objcopy and strip should be the same program
OBJCOPY_PROG=objcopy
STRIP_PROG=strip

STRINGS_PROG=strings

# These should all be the same program too.
SIZE_PROG=size
NM_PROG=nm
OBJDUMP_PROG=objdump

# This is the demangler, as a standalone program.
DEMANGLER_PROG=c++filt

PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG)
STAGESTUFF = $(PROGS) *.o
# Files that can be generated, but should be in the distribution.
DISTSTUFF=arparse.c arlex.c

BASEDIR = $(srcdir)/..
LIBDIR  = ./../bfd
OPCODEDIR = ./../opcodes

#### host and target dependant Makefile fragments come in here.
###

INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BASEDIR)/include -I$(BASEDIR)/bfd

.c.o:
	$(CC) -c $(CFLAGS) $(INCLUDES) $(HDEFINES) $(TDEFINES) $<

#
## Random definitions
# Hopefully all these may be flushed once we get configuration down pat.

# alloca only needed for systems which don't have it and when cc != gcc.
# ALLOCA = alloca.o

# nm tries to malloc enough space for the string table.  The old GNU malloc
# rounds this up to a power of two (e.g. 5M becomes 8M), and so it might 
# fail unnecessarily.  I've also seen some Unix malloc's fail, even when
# there is enough memory.  So use the new GNU malloc.
# MALLOC = gmalloc.o

# Use the GNU getopt unless you have problems with it.
# The IRIS version could probably benefit from being assembled with
# libmalloc rather than the ordinary malloc.
LIBIBERTY_SRC_DIR = $(srcdir)/../libiberty
LIBIBERTY_BIN_DIR = ./../libiberty
LIBIBERTY = $(LIBIBERTY_BIN_DIR)/libiberty.a

# Code shared by all the binutils.
BULIBS = bucomm.o version.o filemode.o

ADDL_LIBS = $(MALLOC) $(BULIBS) $(BFD) $(LIBIBERTY) 

BFD = $(LIBDIR)/libbfd.a
OPCODES = $(OPCODEDIR)/libopcodes.a

RUNTEST = runtest
RUNTESTFLAGS = 
FLAGS_TO_PASS = \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"RUNTEST=$(RUNTEST)" \
	"RUNTESTFLAGS=$(RUNTESTFLAGS) \
	SIZE=`if [ -f $$rootme/$(SIZE_PROG) ] ; then echo $$rootme/$(SIZE_PROG) ; else echo $(SIZE_PROG); fi` \
	OBJCOPY=`if [ -f $$rootme/$(OBJCOPY_PROG) ] ; then echo $$rootme/$(OBJCOPY_PROG) ; else echo $(OBJCOPY_PROG); fi` \
	NM=`if [ -f $$rootme/$(NM_PROG) ] ; then echo $$rootme/$(NM_PROG) ; else echo $(NM_PROG); fi` \
	AR=`if [ -f $$rootme/$(AR_PROG) ] ; then echo $$rootme/$(AR_PROG) ; else echo $(AR_PROG); fi` \
	OBJDUMP=`if [ -f $$rootme/$(OBJDUMP_PROG) ] ; then echo $$rootme/$(OBJDUMP_PROG) ; else echo $(OBJDUMP_PROG); fi` \
	STRINGS=`if [ -f $$rootme/$(STRINGS_PROG) ] ; then echo $$rootme/$(STRINGS_PROG) ; else echo $(STRINGS_PROG); fi` \
	STRIP=`if [ -f $$rootme/$(STRIP_PROG) ] ; then echo $$rootme/$(STRIP_PROG) ; else echo $(STRIP_PROG); fi` \
	RANLIB=`if [ -f $$rootme/$(RANLIB_PROG) ] ; then echo $$rootme/$(RANLIB_PROG) ; else echo $(RANLIB_PROG); fi` \
	DEMANGLE=`if [ -f $$rootme/$(DEMANGLER_PROG) ] ; then echo $$rootme/$(DEMANGLER_PROG) ; else echo $(DEMANGLER_PROG); fi`"

#
## The rules

all: $(ADDL_LIBS) $(PROGS)

testsuite:
	if [ -f testsuite/Makefile.in ]; then \
		(rootme=`pwd`/ ; export rootme ; \
		 rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
		 cd testsuite; $(MAKE) FLAGS_TO_PASS=$(FLAGS_TO_PASS)); \
	else true ; fi

check: force
	rootme=`pwd`; export rootme; cd testsuite ; \
	$(MAKE) check $(FLAGS_TO_PASS)
#	/bin/sh $(srcdir)/sanity.sh .

installcheck:
	/bin/sh $(srcdir)/sanity.sh $(bindir)

info: binutils.info

dvi: binutils.dvi

#$(BFD):$(LIBDIR)/../common/*.c
#	(cd $(LIBDIR); make)

$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)

$(OBJCOPY_PROG): $(ADDL_LIBS) objcopy.o not-strip.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(ADDL_LIBS) $(EXTRALIBS)

$(STRINGS_PROG): $(ADDL_LIBS) strings.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)

$(STRIP_PROG): $(ADDL_LIBS) objcopy.o is-strip.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)

$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)

$(OBJDUMP_PROG): $(ADDL_LIBS) size.o objdump.o $(BFD) $(OPCODES)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)

underscore.c:
	echo "int xxy_us_dummy;" >dummy.c
	$(CC) -c dummy.c
	echo '/*WARNING: This file is automatically generated!*/' >underscore.c
	if [ "`$(NM) dummy.o | grep _xxy_us_dummy ; true`" != "" ]; then \
	  echo "int prepends_underscore = 1;" >>underscore.c; \
	else \
	  echo "int prepends_underscore = 0;" >>underscore.c; \
	fi
	-rm -f dummy.c dummy.o

cplus-dem.o: $(LIBIBERTY_SRC_DIR)/cplus-dem.c
	$(CC) -c -DMAIN $(CFLAGS) $(INCLUDES) $(HDEFINES) $(TDEFINES) $(LIBIBERTY_SRC_DIR)/cplus-dem.c

$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o

arparse.c:arparse.y
	$(BISON) $(BISONFLAGS)  $(srcdir)/arparse.y
	-mv y.tab.c arparse.c
	-mv y.tab.h arparse.h


arlex.c: arlex.l
	$(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
	mv lex.yy.c arlex.c

$(AR_PROG): $(ADDL_LIBS) ar.o arparse.o arlex.o not-ranlib.o $(BFD) arsup.o
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)

$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o arparse.o arlex.o arsup.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)

# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0].  Use this kludge to save some disk space.
# However, you have to install things by hand.
# (That is after 'make install', replace the installed ranlib by a link to ar.)

# Alternatively, you can install ranlib.sh as ranlib.

ar_with_ranlib: $(ADDL_LIBS) ar.o maybe-ranlib.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
	-rm -f $(RANLIB_PROG)
	-ln $(AR_PROG) $(RANLIB_PROG)

# objcopy and strip in one binary that uses argv[0] to decide its action.

objcopy_with_strip: $(ADDL_LIBS) objcopy.o maybe-strip.o $(BFD)
	$(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
	-rm -f $(STRIP_PROG)
	-ln $(OBJCOPY_PROG) $(STRIP_PROG)

stage1: force
	- mkdir stage1
	- mv -f $(STAGESTUFF) stage1

stage2: force
	- mkdir stage2
	- mv -f $(STAGESTUFF) stage2

stage3: force
	- mkdir stage3
	- mv -f $(STAGESTUFF) stage3

against=stage2

comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

de-stage1: force
	- (cd stage1 ; mv -f * ..)
	- rmdir stage1

de-stage2: force
	- (cd stage2 ; mv -f * ..)
	- rmdir stage2

de-stage3: force
	- (cd stage3 ; mv -f * ..)
	- rmdir stage3

######################################################################
# DOCUMENTATION TARGETS
# TeX output
binutils.dvi: $(srcdir)/binutils.texi
	$(TEXI2DVI) $(srcdir)/binutils.texi

# info file for online browsing
binutils.info: $(srcdir)/binutils.texi
	$(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi

#   different targets for -ms, -mm, -me
# Try to use a recent texi2roff.  v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing 
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
#    correspondint -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate

# roff output (-ms)
binutils.ms: $(srcdir)/binutils.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c/d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/binutils.texi | \
	$(TEXI2ROFF) -ms | \
	sed -e 's/---/\\(em/g' \
	>binutils.ms 

# roff output (-mm)
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
#   try leaving them in
binutils.mm: $(srcdir)/binutils.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c/d' \
		-e 's/{.*,,/{/' \
		-e '/@noindent/d' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/binutils.texi | \
	$(TEXI2ROFF) -mm | \
	sed -e 's/---/\\(em/g' \
		>binutils.mm

# roff output (-me)
binutils.me: $(srcdir)/binutils.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c/d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/binutils.texi | \
	$(TEXI2ROFF) -me | \
	sed -e 's/---/\\(em/g' \
	>binutils.me 


######################################################################

mostlyclean:
	-rm -f *.o *~ \#* core binutils.?? binutils.???
clean: mostlyclean
	-rm -f $(PROGS) underscore.c
distclean: clean
	-rm -f Makefile config.status sysdep.h
realclean: distclean
	-rm -f $(DISTSTUFF) TAGS

etags tags: TAGS

TAGS: force
	etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]

install: all
	for i in $(PROGS) ; do \
	  $(INSTALL_XFORM) $$i $(bindir)/$$i ; \
	done
	for i in $(MANPAGES) ; do \
	  $(INSTALL_XFORM1) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
	done
	-if [ -d $(tooldir) ]; then \
	   if [ -d $(tooldir)/bin ] ; then true ; else mkdir $(tooldir)/bin ; fi; \
	   for i in nm strings strip ar ranlib; do \
	     rm -f $(tooldir)/bin/$$i; \
	     ln $(bindir)/`t='$(program_transform_name)'; echo $$i | sed -e "" $$t` $(tooldir)/bin/$$i \
	      || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$i; \
	   done; \
	 else true; fi		

install-info: info
	for i in *.info* ; do \
		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
	done

clean-info:
	-rm -rf *.info*

# Making a dist:
# cvs rtag binutils-x-yy ld+utils
# cvs co -r binutils-x-yy ld+utils
# Sanitize
# cd {HERE}; make dist [-f Makefile.in]

dist: $(DIST_NAME).tar.z

diststuff: $(DISTSTUFF)

$(DIST_NAME).tar.z:
	cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME)
	make diststuff -f Makefile.in
	cd ../ld; make diststuff -f Makefile.in
	cd ../gprof; make diststuff -f Makefile.in
	cd ../texinfo; mv texinfo.tex ..; rm -rf *; mv ../texinfo.tex .
	# Take out texinfo from configurable dirs
	mv ../configure.in tmp; \
	  sed -e '/^host_tools=/s/texinfo //' <tmp >../configure.in; rm tmp
	cd ..; chmod og=u `find . -print`
	cd ../..; tar chf - $(DIST_NAME) | gzip >$(DIST_NAME).tar.z
	rm -rf ../../$(DIST_NAME)

# These get around a bug in Sun Make in SunOS 4.1.1
alloca.o:alloca.c
ar.o: ar.c
arsup.o: arsup.c
bucomm.o: bucomm.c
objcopy.o: objcopy.c
filemode.o:filemode.c
getopt.o:getopt.c
getopt1.o:getopt1.c
gmalloc.o:gmalloc.c
is-ranlib.o:is-ranlib.c
is-strip.o:is-strip.c
maybe-ranlib.o:maybe-ranlib.c
maybe-strip.o:maybe-strip.c
nm.o: nm.c
not-ranlib.o:not-ranlib.c
not-strip.o:not-strip.c
objdump.o: objdump.c
size.o: size.c
strings.o:strings.c
strip.o:strip.c
version.o: $(srcdir)/version.c
	$(CC) $(CFLAGS) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' -c $(srcdir)/version.c

#-----------------------------------------------------------------------------
#		'STANDARD' GNU/960 TARGETS BELOW THIS POINT
#
# 'VERSION' file must be present and contain a string of the form "x.y"
#-----------------------------------------------------------------------------

ver960.c: FORCE
	rm -f ver960.c
	echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c


# Dummy target to force execution of dependent targets.
#
force:

# Target to uncomment host-specific lines in this makefile.  Such lines must
# have the following string beginning in column 1: #__<hostname>__#
# Original Makefile is backed up as 'Makefile.old'.
#
# Invoke with:  make make HOST=xxx
#
make:
	-@if test $(HOST)x = x ; then \
		echo 'Specify "make make HOST=???"'; \
		exit 1; \
	fi ; \
	grep -s "^#The next line was generated by 'make make'" Makefile; \
	if test $$? = 0 ; then	\
		echo "Makefile has already been processed with 'make make'";\
		exit 1; \
	fi ; \
	mv -f Makefile Makefile.old; \
	echo "#The next line was generated by 'make make'"	 >Makefile ; \
	echo "HOST=$(HOST)"					>>Makefile ; \
	echo							>>Makefile ; \
	sed "s/^#__$(HOST)__#//" < Makefile.old			>>Makefile

Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
	$(SHELL) ./config.status

### Local Variables: ***
### mode:fundamental ***
### page-delimiter: "^#" ***
### End: ***
### end of file