Filter and Backend Programming

Headers cups/backend.h
cups/ppd.h
cups/sidechannel.h
Library -lcups
See Also Programming: Introduction to CUPS Programming
Programming: CUPS API
Programming: PPD API
Programming: Raster API
Programming: Developing PostScript Printer Drivers
Programming: Developing Raster Printer Drivers
Specifications: CUPS Design Description

Contents

Overview

Filters (which include printer drivers and port monitors) and backends are used to convert job files to a printable format and send that data to the printer itself. All of these programs use a common interface for processing print jobs and communicating status information to the scheduler. Each is run with a standard set of command-line arguments:

argv[1]
The job ID
argv[2]
The user printing the job
argv[3]
The job name/title
argv[4]
The number of copies to print
argv[5]
The options that were provided when the job was submitted
argv[6]
The file to print (first program only)

The scheduler runs one or more of these programs to print any given job. The first filter reads from the print file and writes to the standard output, while the remaining filters read from the standard input and write to the standard output. The backend is the last filter in the chain and writes to the device.

Filters are always run as a non-privileged user, typically "lp", with no connection to the user's desktop. Backends are run either as a non-privileged user or as root if the file permissions do not allow user or group execution. The file permissions section talks about this in more detail.

Security Considerations

It is always important to use security programming practices. Filters and most backends are run as a non-privileged user, so the major security consideration is resource utilization - filters should not depend on unlimited amounts of CPU, memory, or disk space, and should protect against conditions that could lead to excess usage of any resource like infinite loops and unbounded recursion. In addition, filters must never allow the user to specify an arbitrary file path to a separator page, template, or other file used by the filter since that can lead to an unauthorized disclosure of information. Always treat input as suspect and validate it!

If you are developing a backend that runs as root, make sure to check for potential buffer overflows, integer under/overflow conditions, and file accesses since these can lead to privilege escalations. When writing files, always validate the file path and never allow a user to determine where to store a file.

Note:

Never write files to a user's home directory. Aside from the security implications, CUPS is a network print service and as such the network user may not be the same as the local user and/or there may not be a local home directory to write to.

In addition, some operating systems provide additional security mechanisms that further limit file system access, even for backends running as root. On macOS, for example, no backend may write to a user's home directory. See the Sandboxing on macOS section for more information.

Canceled Jobs and Signal Handling

The scheduler sends SIGTERM when a printing job is canceled or held. Filters, backends, and port monitors must catch SIGTERM and perform any cleanup necessary to produce a valid output file or return the printer to a known good state. The recommended behavior is to end the output on the current page, preferably on the current line or object being printed.

Filters and backends may also receive SIGPIPE when an upstream or downstream filter/backend exits with a non-zero status. Developers should generally ignore SIGPIPE at the beginning of main() with the following function call:

#include <signal.h>

...

int
main(int argc, char *argv[])
{
  signal(SIGPIPE, SIG_IGN);

  ...
}

File Permissions

For security reasons, CUPS will only run filters and backends that are owned by root and do not have world or group write permissions. The recommended permissions for filters and backends are 0555 - read and execute but no write. Backends that must run as root should use permissions of 0500 - read and execute by root, no access for other users. Write permissions can be enabled for the root user only.

To avoid a warning message, the directory containing your filter(s) must also be owned by root and have world and group write disabled - permissions of 0755 or 0555 are strongly encouraged.

Temporary Files

Temporary files should be created in the directory specified by the "TMPDIR" environment variable. The cupsTempFile2 function can be used to safely create temporary files in this directory.

Copy Generation

The argv[4] argument specifies the number of copies to produce of the input file. In general, you should only generate copies if the filename argument is supplied. The only exception to this are filters that produce device-independent PostScript output, since the PostScript filter pstops is responsible for generating copies of PostScript files.

Exit Codes

Filters must exit with status 0 when they successfully generate print data or 1 when they encounter an error. Backends can return any of the cups_backend_t constants.

Environment Variables

The following environment variables are defined by the printing system when running print filters and backends:

APPLE_LANGUAGE
The Apple language identifier associated with the job (macOS only).
CHARSET
The job character set, typically "utf-8".
CLASS
When a job is submitted to a printer class, contains the name of the destination printer class. Otherwise this environment variable will not be set.
CONTENT_TYPE
The MIME type associated with the file (e.g. application/postscript).
CUPS_CACHEDIR
The directory where cache files can be stored. Cache files can be used to retain information between jobs or files in a job.
CUPS_DATADIR
The directory where (read-only) CUPS data files can be found.
CUPS_FILETYPE
The type of file being printed: "job-sheet" for a banner page and "document" for a regular print file.
CUPS_SERVERROOT
The root directory of the server.
DEVICE_URI
The device-uri associated with the printer.
FINAL_CONTENT_TYPE
The MIME type associated with the printer (e.g. application/vnd.cups-postscript).
LANG
The language locale associated with the job.
PPD
The full pathname of the PostScript Printer Description (PPD) file for this printer.
PRINTER
The queue name of the class or printer.
RIP_CACHE
The recommended amount of memory to use for Raster Image Processors (RIPs).
TMPDIR
The directory where temporary files should be created.

Communicating with the Scheduler

Filters and backends communicate with the scheduler by writing messages to the standard error file. The scheduler reads messages from all filters in a job and processes the message based on its prefix. For example, the following code sets the current printer state message to "Printing page 5":

int page = 5;

fprintf(stderr, "INFO: Printing page %d\n", page);

Each message is a single line of text starting with one of the following prefix strings:

ALERT: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "alert" log level.
ATTR: attribute=value [attribute=value]
Sets the named printer or job attribute(s). Typically this is used to set the marker-colors, marker-high-levels, marker-levels, marker-low-levels, marker-message, marker-names, marker-types, printer-alert, and printer-alert-description printer attributes. Standard marker-types values are listed in Table 1. String values need special handling - see Reporting Attribute String Values below.
CRIT: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "critical" log level.
DEBUG: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "debug" log level.
DEBUG2: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "debug2" log level.
EMERG: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "emergency" log level.
ERROR: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "error" log level. Use "ERROR:" messages for non-persistent processing errors.
INFO: message
Sets the printer-state-message attribute. If the current log level is set to "debug2", also adds the specified message to the current error log file using the "info" log level.
NOTICE: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "notice" log level.
PAGE: page-number #-copies
PAGE: total #-pages
Adds an entry to the current page log file. The first form adds #-copies to the job-media-sheets-completed attribute. The second form sets the job-media-sheets-completed attribute to #-pages.
PPD: keyword=value [keyword=value ...]
Changes or adds keywords to the printer's PPD file. Typically this is used to update installable options or default media settings based on the printer configuration.
STATE: + printer-state-reason [printer-state-reason ...]
STATE: - printer-state-reason [printer-state-reason ...]
Sets or clears printer-state-reason keywords for the current queue. Typically this is used to indicate persistent media, ink, toner, and configuration conditions or errors on a printer. Table 2 lists some of the standard "printer-state-reasons" keywords from the IANA IPP Registry - use vendor-prefixed ("com.example.foo") keywords for custom states. See Managing Printer State in a Filter for more information.
WARNING: message
Sets the printer-state-message attribute and adds the specified message to the current error log file using the "warning" log level.

Messages without one of these prefixes are treated as if they began with the "DEBUG:" prefix string.

Table 1: Standard marker-types Values
marker-type Description
developer Developer unit
fuser Fuser unit
fuser-cleaning-pad Fuser cleaning pad
fuser-oil Fuser oil
ink Ink supply
opc Photo conductor
solid-wax Wax supply
staples Staple supply
toner Toner supply
transfer-unit Transfer unit
waste-ink Waste ink tank
waste-toner Waste toner tank
waste-wax Waste wax tank

Table 2: Standard State Keywords
Keyword Description
connecting-to-device Connecting to printer but not printing yet.
cover-open The printer's cover is open.
input-tray-missing The paper tray is missing.
marker-supply-empty The printer is out of ink.
marker-supply-low The printer is almost out of ink.
marker-waste-almost-full The printer's waste bin is almost full.
marker-waste-full The printer's waste bin is full.
media-empty The paper tray (any paper tray) is empty.
media-jam There is a paper jam.
media-low The paper tray (any paper tray) is almost empty.
media-needed The paper tray needs to be filled (for a job that is printing).
paused Stop the printer.
timed-out Unable to connect to printer.
toner-empty The printer is out of toner.
toner-low The printer is low on toner.

Reporting Attribute String Values

When reporting string values using "ATTR:" messages, a filter or backend must take special care to appropriately quote those values. The scheduler uses the CUPS option parsing code for attributes, so the general syntax is:

name=simple
name=simple,simple,...
name='complex value'
name="complex value"
name='"complex value"','"complex value"',...

Simple values are strings that do not contain spaces, quotes, backslashes, or the comma and can be placed verbatim in the "ATTR:" message, for example:

int levels[4] = { 40, 50, 60, 70 }; /* CMYK */

fputs("ATTR: marker-colors=#00FFFF,#FF00FF,#FFFF00,#000000\n", stderr);
fputs("ATTR: marker-high-levels=100,100,100,100\n", stderr);
fprintf(stderr, "ATTR: marker-levels=%d,%d,%d,%d\n", levels[0], levels[1],
        levels[2], levels[3], levels[4]);
fputs("ATTR: marker-low-levels=5,5,5,5\n", stderr);
fputs("ATTR: marker-types=toner,toner,toner,toner\n", stderr);

Complex values that contains spaces, quotes, backslashes, or the comma must be quoted. For a single value a single set of quotes is sufficient:

fputs("ATTR: marker-message='Levels shown are approximate.'\n", stderr);

When multiple values are reported, each value must be enclosed by a set of single and double quotes:

fputs("ATTR: marker-names='\"Cyan Toner\"','\"Magenta Toner\"',"
      "'\"Yellow Toner\"','\"Black Toner\"'\n", stderr);

The IPP backend includes a quote_string function that may be used to properly quote a complex value in an "ATTR:" message:

static const char *                     /* O - Quoted string */
quote_string(const char *s,             /* I - String */
             char       *q,             /* I - Quoted string buffer */
             size_t     qsize)          /* I - Size of quoted string buffer */
{
  char  *qptr,                          /* Pointer into string buffer */
        *qend;                          /* End of string buffer */


  qptr = q;
  qend = q + qsize - 5;

  if (qend < q)
  {
    *q = '\0';
    return (q);
  }

  *qptr++ = '\'';
  *qptr++ = '\"';

  while (*s && qptr < qend)
  {
    if (*s == '\\' || *s == '\"' || *s == '\'')
    {
      if (qptr < (qend - 4))
      {
        *qptr++ = '\\';
        *qptr++ = '\\';
        *qptr++ = '\\';
      }
      else
        break;
    }

    *qptr++ = *s++;
  }

  *qptr++ = '\"';
  *qptr++ = '\'';
  *qptr   = '\0';

  return (q);
}

Managing Printer State in a Filter

Filters are responsible for managing the state keywords they set using "STATE:" messages. Typically you will update all of the keywords that are used by the filter at startup, for example:

if (foo_condition != 0)
  fputs("STATE: +com.example.foo\n", stderr);
else
  fputs("STATE: -com.example.foo\n", stderr);

if (bar_condition != 0)
  fputs("STATE: +com.example.bar\n", stderr);
else
  fputs("STATE: -com.example.bar\n", stderr);

Then as conditions change, your filter sends "STATE: +keyword" or "STATE: -keyword" messages as necessary to set or clear the corresponding keyword, respectively.

State keywords are often used to notify the user of issues that span across jobs, for example "media-empty-warning" that indicates one or more paper trays are empty. These keywords should not be cleared unless the corresponding issue no longer exists.

Filters should clear job-related keywords on startup and exit so that they do not remain set between jobs. For example, "connecting-to-device" is a job sub-state and not an issue that applies when a job is not printing.

Note:

"STATE:" messages often provide visible alerts to the user. For example, on macOS setting a printer-state-reason value with an "-error" or "-warning" suffix will cause the printer's dock item to bounce if the corresponding reason is localized with a cupsIPPReason keyword in the printer's PPD file.

When providing a vendor-prefixed keyword, always provide the corresponding standard keyword (if any) to allow clients to respond to the condition correctly. For example, if you provide a vendor-prefixed keyword for a low cyan ink condition ("com.example.cyan-ink-low") you must also set the "marker-supply-low-warning" keyword. In such cases you should also refrain from localizing the vendor-prefixed keyword in the PPD file - otherwise both the generic and vendor-specific keyword will be shown in the user interface.

Reporting Supply Levels

CUPS tracks several "marker-*" attributes for ink/toner supply level reporting. These attributes allow applications to display the current supply levels for a printer without printer-specific software. Table 3 lists the marker attributes and what they represent.

Filters set marker attributes by sending "ATTR:" messages to stderr. For example, a filter supporting an inkjet printer with black and tri-color ink cartridges would use the following to initialize the supply attributes:

fputs("ATTR: marker-colors=#000000,#00FFFF#FF00FF#FFFF00\n", stderr);
fputs("ATTR: marker-low-levels=5,10\n", stderr);
fputs("ATTR: marker-names=Black,Tri-Color\n", stderr);
fputs("ATTR: marker-types=ink,ink\n", stderr);

Then periodically the filter queries the printer for its current supply levels and updates them with a separate "ATTR:" message:

int black_level, tri_level;
...
fprintf(stderr, "ATTR: marker-levels=%d,%d\n", black_level, tri_level);
Table 3: Supply Level Attributes
Attribute Description
marker-colors A list of comma-separated colors; each color is either "none" or one or more hex-encoded sRGB colors of the form "#RRGGBB".
marker-high-levels A list of comma-separated "almost full" level values from 0 to 100; a value of 100 should be used for supplies that are consumed/emptied like ink cartridges.
marker-levels A list of comma-separated level values for each supply. A value of -1 indicates the level is unavailable, -2 indicates unknown, and -3 indicates the level is unknown but has not yet reached capacity. Values from 0 to 100 indicate the corresponding percentage.
marker-low-levels A list of comma-separated "almost empty" level values from 0 to 100; a value of 0 should be used for supplies that are filled like waste ink tanks.
marker-message A human-readable supply status message for the user like "12 pages of ink remaining."
marker-names A list of comma-separated supply names like "Cyan Ink", "Fuser", etc.
marker-types A list of comma-separated supply types; the types are listed in Table 1.

Communicating with the Backend

Filters can communicate with the backend via the cupsBackChannelRead and cupsSideChannelDoRequest functions. The cupsBackChannelRead function reads data that has been sent back from the device and is typically used to obtain status and configuration information. For example, the following code polls the backend for back-channel data:

#include <cups/cups.h>

char buffer[8192];
ssize_t bytes;

/* Use a timeout of 0.0 seconds to poll for back-channel data */
bytes = cupsBackChannelRead(buffer, sizeof(buffer), 0.0);

Filters can also use select() or poll() on the back-channel file descriptor (3 or CUPS_BC_FD) to read data only when it is available.

The cupsSideChannelDoRequest function allows you to get out-of-band status information and do synchronization with the device. For example, the following code gets the current IEEE-1284 device ID string from the backend:

#include <cups/sidechannel.h>

char data[2049];
int datalen;
cups_sc_status_t status;

/* Tell cupsSideChannelDoRequest() how big our buffer is, less 1 byte for
   nul-termination... */
datalen = sizeof(data) - 1;

/* Get the IEEE-1284 device ID, waiting for up to 1 second */
status = cupsSideChannelDoRequest(CUPS_SC_CMD_GET_DEVICE_ID, data, &datalen, 1.0);

/* Use the returned value if OK was returned and the length is non-zero */
if (status == CUPS_SC_STATUS_OK && datalen > 0)
  data[datalen] = '\0';
else
  data[0] = '\0';

Forcing All Output to a Printer

The cupsSideChannelDoRequest function allows you to tell the backend to send all pending data to the printer. This is most often needed when sending query commands to the printer. For example:

#include <cups/cups.h>
#include <cups/sidechannel.h>

char data[1024];
int datalen = sizeof(data);
cups_sc_status_t status;

/* Flush pending output to stdout */
fflush(stdout);

/* Drain output to backend, waiting for up to 30 seconds */
status = cupsSideChannelDoRequest(CUPS_SC_CMD_DRAIN_OUTPUT, data, &datalen, 30.0);

/* Read the response if the output was sent */
if (status == CUPS_SC_STATUS_OK)
{
  ssize_t bytes;

  /* Wait up to 10.0 seconds for back-channel data */
  bytes = cupsBackChannelRead(data, sizeof(data), 10.0);
  /* do something with the data from the printer */
}

Communicating with Filters

Backends communicate with filters using the reciprocal functions cupsBackChannelWrite, cupsSideChannelRead, and cupsSideChannelWrite. We recommend writing back-channel data using a timeout of 1.0 seconds:

#include <cups/cups.h>

char buffer[8192];
ssize_t bytes;

/* Obtain data from printer/device */
...

/* Use a timeout of 1.0 seconds to give filters a chance to read */
cupsBackChannelWrite(buffer, bytes, 1.0);

The cupsSideChannelRead function reads a side-channel command from a filter, driver, or port monitor. Backends can either poll for commands using a timeout of 0.0, wait indefinitely for commands using a timeout of -1.0 (probably in a separate thread for that purpose), or use select or poll on the CUPS_SC_FD file descriptor (4) to handle input and output on several file descriptors at the same time.

Once a command is processed, the backend uses the cupsSideChannelWrite function to send its response. For example, the following code shows how to poll for a side-channel command and respond to it:

#include <cups/sidechannel.h>

cups_sc_command_t command;
cups_sc_status_t status;
char data[2048];
int datalen = sizeof(data);

/* Poll for a command... */
if (!cupsSideChannelRead(&command, &status, data, &datalen, 0.0))
{
  switch (command)
  {
    /* handle supported commands, fill data/datalen/status with values as needed */

    default :
        status  = CUPS_SC_STATUS_NOT_IMPLEMENTED;
	datalen = 0;
	break;
  }

  /* Send a response... */
  cupsSideChannelWrite(command, status, data, datalen, 1.0);
}

Doing SNMP Queries with Network Printers

The Simple Network Management Protocol (SNMP) allows you to get the current status, page counter, and supply levels from most network printers. Every piece of information is associated with an Object Identifier (OID), and every printer has a community name associated with it. OIDs can be queried directly or by "walking" over a range of OIDs with a common prefix.

The two CUPS SNMP functions provide a simple API for querying network printers through the side-channel interface. Each accepts a string containing an OID like ".1.3.6.1.2.1.43.10.2.1.4.1.1" (the standard page counter OID) along with a timeout for the query.

The cupsSideChannelSNMPGet function queries a single OID and returns the value as a string in a buffer you supply:

#include <cups/sidechannel.h>

char data[512];
int datalen = sizeof(data);

if (cupsSideChannelSNMPGet(".1.3.6.1.2.1.43.10.2.1.4.1.1", data, &datalen, 5.0)
        == CUPS_SC_STATUS_OK)
{
  /* Do something with the value */
  printf("Page counter is: %s\n", data);
}

The cupsSideChannelSNMPWalk function allows you to query a whole group of OIDs, calling a function of your choice for each OID that is found:

#include <cups/sidechannel.h>

void
my_callback(const char *oid, const char *data, int datalen, void *context)
{
  /* Do something with the value */
  printf("%s=%s\n", oid, data);
}

...

void *my_data;

cupsSNMPSideChannelWalk(".1.3.6.1.2.1.43", 5.0, my_callback, my_data);

Sandboxing on macOS

Starting with macOS 10.6, filters and backends are run inside a security "sandbox" which further limits (beyond the normal UNIX user/group permissions) what a filter or backend can do. This helps to both secure the printing system from malicious software and enforce the functional separation of components in the CUPS filter chain. What follows is a list of actions that are explicitly allowed for all filters and backends:

  1. Reading of files: pursuant to normal UNIX file permissions, filters and backends can read files for the current job from the /private/var/spool/cups directory and other files on mounted filesystems except for user home directories under /Users.
  2. Writing of files: pursuant to normal UNIX file permissions, filters and backends can read/write files to the cache directory specified by the CUPS_CACHEDIR environment variable, to the state directory specified by the CUPS_STATEDIR environment variable, to the temporary directory specified by the TMPDIR environment variable, and under the /private/var/db, /private/var/folders, /private/var/lib, /private/var/mysql, /private/var/run, /private/var/spool (except /private/var/spool/cups), /Library/Application Support, /Library/Caches, /Library/Logs, /Library/Preferences, /Library/WebServer, and /Users/Shared directories.
  3. Execution of programs: pursuant to normal UNIX file permissions, filters and backends can execute any program not located under the /Users directory. Child processes inherit the sandbox and are subject to the same restrictions as the parent.
  4. Bluetooth and USB: backends can access Bluetooth and USB printers through IOKit. Filters cannot access Bluetooth and USB printers directly.
  5. Network: filters and backends can access UNIX domain sockets under the /private/tmp, /private/var/run, and /private/var/tmp directories. Backends can also create IPv4 and IPv6 TCP (outgoing) and UDP (incoming and outgoing) socket, and bind to local source ports. Filters cannot directly create IPv4 and IPv6 TCP or UDP sockets.
  6. Notifications: filters and backends can send notifications via the Darwin notify_post() API.
Note: The sandbox profile used in CUPS 2.0 still allows some actions that are not listed above - these privileges will be removed over time until the profile matches the list above.

Functions

 CUPS 1.2/macOS 10.5 cupsBackChannelRead

Read data from the backchannel.

ssize_t cupsBackChannelRead(char *buffer, size_t bytes, double timeout);

Parameters

buffer Buffer to read into
bytes Bytes to read
timeout Timeout in seconds, typically 0.0 to poll

Return Value

Bytes read or -1 on error

Discussion

Reads up to "bytes" bytes from the backchannel/backend. The "timeout" parameter controls how many seconds to wait for the data - use 0.0 to return immediately if there is no data, -1.0 to wait for data indefinitely.

 CUPS 1.2/macOS 10.5 cupsBackChannelWrite

Write data to the backchannel.

ssize_t cupsBackChannelWrite(const char *buffer, size_t bytes, double timeout);

Parameters

buffer Buffer to write
bytes Bytes to write
timeout Timeout in seconds, typically 1.0

Return Value

Bytes written or -1 on error

Discussion

Writes "bytes" bytes to the backchannel/filter. The "timeout" parameter controls how many seconds to wait for the data to be written - use 0.0 to return immediately if the data cannot be written, -1.0 to wait indefinitely.

 CUPS 1.2/macOS 10.5 cupsBackendDeviceURI

Get the device URI for a backend.

const char *cupsBackendDeviceURI(char **argv);

Parameters

argv Command-line arguments

Return Value

Device URI or NULL

Discussion

The "argv" argument is the argv argument passed to main(). This function returns the device URI passed in the DEVICE_URI environment variable or the device URI passed in argv[0], whichever is found first.

 CUPS 1.4/macOS 10.6 cupsBackendReport

Write a device line from a backend.

void cupsBackendReport(const char *device_scheme, const char *device_uri, const char *device_make_and_model, const char *device_info, const char *device_id, const char *device_location);

Parameters

device_scheme device-scheme string
device_uri device-uri string
device_make_and_model device-make-and-model string or NULL
device_info device-info string or NULL
device_id device-id string or NULL
device_location device-location string or NULL

Discussion

This function writes a single device line to stdout for a backend. It handles quoting of special characters in the device-make-and-model, device-info, device-id, and device-location strings.

 CUPS 1.3/macOS 10.5 cupsSideChannelDoRequest

Send a side-channel command to a backend and wait for a response.

cups_sc_status_t cupsSideChannelDoRequest(cups_sc_command_t command, char *data, int *datalen, double timeout);

Parameters

command Command to send
data Response data buffer pointer
datalen Size of data buffer on entry, number of bytes in buffer on return
timeout Timeout in seconds

Return Value

Status of command

Discussion

This function is normally only called by filters, drivers, or port monitors in order to communicate with the backend used by the current printer. Programs must be prepared to handle timeout or "not implemented" status codes, which indicate that the backend or device do not support the specified side-channel command.

The "datalen" parameter must be initialized to the size of the buffer pointed to by the "data" parameter. cupsSideChannelDoRequest() will update the value to contain the number of data bytes in the buffer.

 CUPS 1.3/macOS 10.5 cupsSideChannelRead

Read a side-channel message.

int cupsSideChannelRead(cups_sc_command_t *command, cups_sc_status_t *status, char *data, int *datalen, double timeout);

Parameters

command Command code
status Status code
data Data buffer pointer
datalen Size of data buffer on entry, number of bytes in buffer on return
timeout Timeout in seconds

Return Value

0 on success, -1 on error

Discussion

This function is normally only called by backend programs to read commands from a filter, driver, or port monitor program. The caller must be prepared to handle incomplete or invalid messages and return the corresponding status codes.

The "datalen" parameter must be initialized to the size of the buffer pointed to by the "data" parameter. cupsSideChannelDoRequest() will update the value to contain the number of data bytes in the buffer.

 CUPS 1.4/macOS 10.6 cupsSideChannelSNMPGet

Query a SNMP OID's value.

cups_sc_status_t cupsSideChannelSNMPGet(const char *oid, char *data, int *datalen, double timeout);

Parameters

oid OID to query
data Buffer for OID value
datalen Size of OID buffer on entry, size of value on return
timeout Timeout in seconds

Return Value

Query status

Discussion

This function asks the backend to do a SNMP OID query on behalf of the filter, port monitor, or backend using the default community name.

"oid" contains a numeric OID consisting of integers separated by periods, for example ".1.3.6.1.2.1.43". Symbolic names from SNMP MIBs are not supported and must be converted to their numeric forms.

On input, "data" and "datalen" provide the location and size of the buffer to hold the OID value as a string. HEX-String (binary) values are converted to hexadecimal strings representing the binary data, while NULL-Value and unknown OID types are returned as the empty string. The returned "datalen" does not include the trailing nul. CUPS_SC_STATUS_NOT_IMPLEMENTED is returned by backends that do not support SNMP queries. CUPS_SC_STATUS_NO_RESPONSE is returned when the printer does not respond to the SNMP query.

 CUPS 1.4/macOS 10.6 cupsSideChannelSNMPWalk

Query multiple SNMP OID values.

cups_sc_status_t cupsSideChannelSNMPWalk(const char *oid, double timeout, cups_sc_walk_func_t cb, void *context);

Parameters

oid First numeric OID to query
timeout Timeout for each query in seconds
cb Function to call with each value
context Application-defined pointer to send to callback

Return Value

Status of first query of CUPS_SC_STATUS_OK on success

Discussion

This function asks the backend to do multiple SNMP OID queries on behalf of the filter, port monitor, or backend using the default community name. All OIDs under the "parent" OID are queried and the results are sent to the callback function you provide.

"oid" contains a numeric OID consisting of integers separated by periods, for example ".1.3.6.1.2.1.43". Symbolic names from SNMP MIBs are not supported and must be converted to their numeric forms.

"timeout" specifies the timeout for each OID query. The total amount of time will depend on the number of OID values found and the time required for each query.

"cb" provides a function to call for every value that is found. "context" is an application-defined pointer that is sent to the callback function along with the OID and current data. The data passed to the callback is the same as returned by cupsSideChannelSNMPGet. CUPS_SC_STATUS_NOT_IMPLEMENTED is returned by backends that do not support SNMP queries. CUPS_SC_STATUS_NO_RESPONSE is returned when the printer does not respond to the first SNMP query.

 CUPS 1.3/macOS 10.5 cupsSideChannelWrite

Write a side-channel message.

int cupsSideChannelWrite(cups_sc_command_t command, cups_sc_status_t status, const char *data, int datalen, double timeout);

Parameters

command Command code
status Status code
data Data buffer pointer
datalen Number of bytes of data
timeout Timeout in seconds

Return Value

0 on success, -1 on error

Discussion

This function is normally only called by backend programs to send responses to a filter, driver, or port monitor program.

Data Types

cups_backend_t

Backend exit codes

typedef enum cups_backend_e cups_backend_t;

cups_sc_bidi_t

Bidirectional capabilities

typedef enum cups_sc_bidi_e cups_sc_bidi_t;

cups_sc_command_t

Request command codes

typedef enum cups_sc_command_e cups_sc_command_t;

cups_sc_connected_t

Connectivity values

typedef enum cups_sc_connected_e cups_sc_connected_t;

cups_sc_state_t

Printer state bits

typedef enum cups_sc_state_e cups_sc_state_t;

cups_sc_status_t

Response status codes

typedef enum cups_sc_status_e cups_sc_status_t;

cups_sc_walk_func_t

SNMP walk callback

typedef void (*cups_sc_walk_func_t)(const char *oid, const char *data, int datalen, void *context);

Constants

cups_backend_e

Backend exit codes

Constants

CUPS_BACKEND_AUTH_REQUIRED Job failed, authentication required
CUPS_BACKEND_CANCEL Job failed, cancel job
CUPS_BACKEND_FAILED Job failed, use error-policy
CUPS_BACKEND_HOLD Job failed, hold job
CUPS_BACKEND_OK Job completed successfully
CUPS_BACKEND_RETRY Job failed, retry this job later
CUPS_BACKEND_RETRY_CURRENT Job failed, retry this job immediately
CUPS_BACKEND_STOP Job failed, stop queue

cups_sc_bidi_e

Bidirectional capability values

Constants

CUPS_SC_BIDI_NOT_SUPPORTED Bidirectional I/O is not supported
CUPS_SC_BIDI_SUPPORTED Bidirectional I/O is supported

cups_sc_command_e

Request command codes

Constants

CUPS_SC_CMD_DRAIN_OUTPUT Drain all pending output
CUPS_SC_CMD_GET_BIDI Return bidirectional capabilities
CUPS_SC_CMD_GET_CONNECTED  CUPS 1.5/macOS 10.7  Return whether the backend is "connected" to the printer
CUPS_SC_CMD_GET_DEVICE_ID Return the IEEE-1284 device ID
CUPS_SC_CMD_GET_STATE Return the device state
CUPS_SC_CMD_SNMP_GET  CUPS 1.4/macOS 10.6  Query an SNMP OID
CUPS_SC_CMD_SNMP_GET_NEXT  CUPS 1.4/macOS 10.6  Query the next SNMP OID
CUPS_SC_CMD_SOFT_RESET Do a soft reset

cups_sc_connected_e

Connectivity values

Constants

CUPS_SC_CONNECTED Backend is "connected" to printer
CUPS_SC_NOT_CONNECTED Backend is not "connected" to printer

cups_sc_state_e

Printer state bits

Constants

CUPS_SC_STATE_BUSY Device is busy
CUPS_SC_STATE_ERROR Other error condition
CUPS_SC_STATE_MARKER_EMPTY Toner/ink out condition
CUPS_SC_STATE_MARKER_LOW Toner/ink low condition
CUPS_SC_STATE_MEDIA_EMPTY Paper out condition
CUPS_SC_STATE_MEDIA_LOW Paper low condition
CUPS_SC_STATE_OFFLINE Device is offline
CUPS_SC_STATE_ONLINE Device is online

cups_sc_status_e

Response status codes

Constants

CUPS_SC_STATUS_BAD_MESSAGE The command/response message was invalid
CUPS_SC_STATUS_IO_ERROR An I/O error occurred
CUPS_SC_STATUS_NONE No status
CUPS_SC_STATUS_NOT_IMPLEMENTED Command not implemented
CUPS_SC_STATUS_NO_RESPONSE The device did not respond
CUPS_SC_STATUS_OK Operation succeeded
CUPS_SC_STATUS_TIMEOUT The backend did not respond
CUPS_SC_STATUS_TOO_BIG Response too big