Tue Dec 29 16:03:53 1998 Rainer Orth * configure.in, configure (mips64vr5*-*-*): Added missing ;; in case statement. 1998-12-29 Frank Ch. Eigler * interp.c (sim_open): Allocate jm3904 memory in smaller chunks. (load_word): Call SIM_CORE_SIGNAL hook on error. (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before starting. For exception dispatching, pass PC instead of NULL_CIA. (decode_coproc): Use COP0_BADVADDR to store faulting address. * sim-main.h (COP0_BADVADDR): Define. (SIM_CORE_SIGNAL): Define hook to call mips_core_signal. (SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*(). (_sim_cpu): Add exc_* fields to store register value snapshots. * mips.igen (*): Replace memory-related SignalException* calls with references to SIM_CORE_SIGNAL hook. * dv-tx3904irc.c (tx3904irc_port_event): printf format warning fix. * sim-main.c (*): Minor warning cleanups. 1998-12-24 Gavin Romig-Koch * m16.igen (DADDIU5): Correct type-o. Mon Dec 21 10:34:48 1998 Andrew Cagney * mips.igen (do_ddiv, do_ddivu): Pacify GCC. Update hi/lo via tmp variables. start-sanitize-vr4xxx 1998-12-17 Gavin Romig-Koch * vr4run.c (sim_engine_run): Enable the 4111. end-sanitize-vr4xxx Wed Dec 16 18:20:28 1998 Andrew Cagney * Makefile.in (SIM_EXTRA_CFLAGS): No longer need to add .../newlib to include path. (interp.o): Add dependency on itable.h (oengine.c, gencode): Delete remaining references. (BUILT_SRC_FROM_GEN): Clean up. start-sanitize-vr4xxx (SIM_HACK_ALL): Define. (hack, libhack.a): Do not build. end-sanitize-vr4xxx 1998-12-16 Gavin Romig-Koch * vr4run.c: New. * Makefile.in (SIM_HACK_OBJ,HACK_OBJS,HACK_GEN_SRCS,libhack.a, tmp-hack,tmp-m32-hack,tmp-m16-hack,tmp-itable-hack, tmp-run-hack) : New. * configure.in (mips64vr4xxx): Switch to using the HACK generator. Set TARGET_ENABLE_FR. * m16.igen (LD,DADDIU,DADDUI5,DADJSP,DADDIUSP,DADDI,DADDU,DSUBU, DSLL,DSRL,DSRA,DSLLV,DSRAV,DMULT,DMULTU,DDIV,DDIVU,JALX32,JALX): Drop the "64" qualifier to get the HACK generator working. Use IMMEDIATE rather than IMMED. Use SHAMT rather than SHIFT. Add vr4121 where necessary. * mips.igen (do_daddiu,do_ddiv,do_divu): Remove the 64-only qualifier to get the hack generator working. (do_dsll,do_dsllv,do_dsra,do_dsrl,do_dsrlv): New. (DSLL): Use do_dsll. (DSLLV): Use do_dsllv. (DSRA): Use do_dsra. (DSRL): Use do_dsrl. (DSRLV): Use do_dsrlv. (BC1): Move *vr4100,*vr4111, and *vr4121 to get the HACK generator working. (CxC1, DMxC1, MxC1,MACCU,MACCHI,MACCHIU): Rename to get the HACK generator working. * vr.igen: Add *vr4320 where missing. (MACC) Rename to get the HACK generator working. (DMACC,MACCS,DMACCS): Add the 64. start-sanitize-vr4320 1998-12-14 Gavin Romig-Koch * vr.igen (Low32Bits): Add vr4320. end-sanitize-vr4320 1998-12-14 Gavin Romig-Koch * configure.in: Add support for 5xxx and "el". * configure: Rebuild. start-sanitize-vr4xxx 1998-12-13 Gavin Romig-Koch * configure.in,mips.igen,vr.igen: Add vr4121. * configure: Rebuilt. end-sanitize-vr4xxx 1998-12-12 Gavin Romig-Koch start-sanitize-vr4xxx * configure.in (mips64vr4xxx): Enable TARGET_ENABLE_FR. Set mips_fpu, and mips_fpu_bitsize. Set sim_gen, and sim_igen_machine. * configure: Rebuild. end-sanitize-vr4xxx * mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts. * sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR. 1998-12-11 Gavin Romig-Koch * mips/interp.c (DEBUG): Cleanups. 1998-12-10 Frank Ch. Eigler * dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes. (tx3904sio_tickle): fflush after a stdout character output. 1998-12-03 Frank Ch. Eigler * interp.c (sim_close): Uninstall modules. start-sanitize-sky Tue Dec 1 18:40:30 1998 Andrew Cagney * sky-libvpe.c (FCmp): Abort when no result. end-sanitize-sky Wed Nov 25 13:41:03 1998 Andrew Cagney * sim-main.h, interp.c (sim_monitor): Change to global function. Wed Nov 25 17:33:24 1998 Andrew Cagney * configure.in (vr4100): Only include vr4100 instructions in simulator. * configure: Re-generate. * m16.igen (*): Tag all mips16 instructions as also being vr4100. Mon Nov 23 18:20:36 1998 Andrew Cagney * Makefile.in (SIM_CFLAGS): Do not define WITH_IGEN. * sim-main.h, sim-main.c, interp.c: Delete #if WITH_IGEN keeping true alternative. * configure.in (sim_default_gen, sim_use_gen): Replace with sim_gen. (--enable-sim-igen): Delete config option. Always using IGEN. * configure: Re-generate. * Makefile.in (gencode): Kill, kill, kill. * gencode.c: Ditto. Mon Nov 23 18:07:36 1998 Andrew Cagney * configure.in: Configure mips64vr4100-elf nee mips64vr41* as a 64 bit mips16 igen simulator. * configure: Re-generate. * mips.igen (check_div_hilo, check_mult_hilo, check_mf_hilo): Mark as part of vr4100 ISA. * vr.igen: Mark all instructions as 64 bit only. Mon Nov 23 17:07:37 1998 Andrew Cagney * interp.c (get_cell, sim_monitor, fetch_str, CoProcPresent): Pacify GCC. start-sanitize-tx19 Mon Nov 23 16:51:02 1998 Andrew Cagney * configure.in (tx19): Reconize target mips-tx19-elf. * configure: Re-generate. end-sanitize-tx19 Mon Nov 23 13:23:40 1998 Andrew Cagney * configure.in: Configure mips-lsi-elf nee mips*lsi* as a mipsIII/mips16 igen simulator. Fix sim_gen VS sim_igen typos. * configure: Re-generate. * m16.igen (BREAK): Define breakpoint instruction. (JALX32): Mark instruction as mips16 and not r3900. * mips.igen (C.cond.fmt): Fix typo in instruction format. * sim-main.h (PENDING_FILL): Wrap C statements in do/while. start-sanitize-r5900 Mon Nov 16 11:44:24 1998 Andrew Cagney * r5900.igen (CVT.W.S): Always round towards zero. end-sanitize-r5900 Sat Nov 7 09:54:38 1998 Andrew Cagney * gencode.c (build_instruction - BREAK): For MIPS16, handle BREAK insn as a debug breakpoint. * sim-main.h (PENDING_SLOT_BIT): Fix, was incorrectly defined as pending.slot_size. (PENDING_SCHED): Clean up trace statement. (PENDING_SCHED): Increment PENDING_IN and PENDING_TOTAL. (PENDING_FILL): Delay write by only one cycle. (PENDING_FILL): For FSRs, write fmt_uninterpreted to FPR_STATE. * sim-main.c (pending_tick): Clean up trace statements. Add trace of pending writes. (pending_tick): Fix sizes in switch statements, 4 & 8 instead of 32 & 64. (pending_tick): Move incrementing of index to FOR statement. (pending_tick): Only update PENDING_OUT after a write has occured. * configure.in: Add explicit mips-lsi-* target. Use gencode to build simulator. * configure: Re-generate. * interp.c (sim_engine_run OLD): Delete explicit call to PENDING_TICK. Now called via ENGINE_ISSUE_PREFIX_HOOK. start-sanitize-r5900 Wed Nov 11 16:53:57 1998 Andrew Cagney * r5900.igen (RSQRT): Set both I/SI and D/SD when div-0. Thu Nov 5 10:29:42 EST 1998 Frank Ch. Eigler * r5900.igen (r59fp_opdiv): Correct erroneous FGR[FD] reference. Thu Nov 5 19:40:12 1998 Andrew Cagney * r5900.igen (DIV): Do not clear clear SO/SU when already set. * r5900.igen (RSQRT.S): Do not compute 1/srqt(abs(T)) when T negative, compute S/sqrt(abs(T)) instead. Correctly set FCSR bits. * r5900.igen (RSQRT.S): Handle overflow/underflow better. Check sign of FT not FS. (r59fp_store): Clarify "bad value" abort messages. end-sanitize-r5900 Sat Oct 30 09:49:10 1998 Frank Ch. Eigler * dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Add dummy interrupt level number to match changed SignalExceptionInterrupt macro. start-sanitize-sky Thu Oct 29 12:47:46 1998 Frank Ch. Eigler * sim-main.c (tlb_try_match): Include physical address in scratchpad non-mapping warning. end-sanitize-sky start-sanitize-r5900 Thu Oct 29 11:06:30 EST 1998 Frank Ch. Eigler * r5900.igen: Fix PSRLVW, MULTU1, PADSBH instructions, as per customer patch. end-sanitize-r5900 Fri Oct 9 18:02:25 1998 Doug Evans * interp.c: #include "itable.h" if WITH_IGEN. (get_insn_name): New function. (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS. * sim-main.h (MAX_INSNS,INSN_NAME): Delete. start-sanitize-sky Tue Sep 22 10:35:37 1998 Frank Ch. Eigler * sim-main.c (tlb_try_match): Specially match virtual pages mapped to scratchpad RAM, an unimplemented feature. end-sanitize-sky start-sanitize-r5900 Fri Sep 18 11:31:16 1998 Frank Ch. Eigler * r5900.igen (prot3w): Correct rotation sequence; patch from customer. end-sanitize-r5900 Mon Sep 14 12:36:44 1998 Frank Ch. Eigler * configure: Rebuilt to inhale new common/aclocal.m4. start-sanitize-r5900 Thu Sep 10 11:50:54 1998 Doug Evans * r5900.igen (plzcw): Make `i' signed. Wed Sep 9 15:02:10 1998 Doug Evans * sim-main.h (COP0_COUNT,COP0_COMPARE,status_IM7): New macros. * sky-engine.c (cpu_issue): Increment COP0_COUNT and signal an interrupt if == COP0_COMPARE and interrupt masks/enables allow it. * interp.c (signal_exception, sky version): Handle INT 2. Wed Sep 9 11:28:20 1998 Ron Unrau * sim-main.h: track COP0 registers * interp.c (sim_{fetch,store}_register): read/write COP0 registers Fri Sep 4 10:37:57 1998 Frank Ch. Eigler * r5900.igen (mtsab): Correct typo in input register. * sim-main.h (TMP_*): New macros for accessing local 128-bit temporary for multimedia instructions. * r5900.igen (*): Convert most instructions to use new TMP macros to store output result during computation. end-sanitize-r5900 Tue Sep 1 15:39:18 1998 Frank Ch. Eigler * dv-tx3904sio.c: Include sim-assert.h. Tue Aug 25 12:49:46 1998 Frank Ch. Eigler * dv-tx3904sio.c: New file: tx3904 serial I/O module. * configure.in: Add dv-tx3904sio, dv-sockser for tx39 target. Reorganize target-specific sim-hardware checks. * configure: rebuilt. * interp.c (sim_open): For tx39 target boards, set OPERATING_ENVIRONMENT, add tx3904sio devices. * tconfig.in: For tx39 target, set SIM_HANDLES_LMA for loading ROM executables. Install dv-sockser into sim-modules list. * dv-tx3904irc.c: Compiler warning clean-up. * dv-tx3904tmr.c: Compiler warning clean-up. Remove particularly frequent hw-trace messages. start-sanitize-sky Tue Aug 11 13:52:16 1998 Frank Ch. Eigler * interp.c (signal_exception): Set IP3 bit in CAUSE on sky interrupt. end-sanitize-sky Fri Jul 31 18:14:16 1998 Andrew Cagney * vr.igen (MulAcc): Identify as a vr4100 specific function. Sat Jul 25 16:03:14 1998 Andrew Cagney * Makefile.in (IGEN_INCLUDE): Add vr.igen. * vr.igen: New file. (MAC/MADD16, DMAC/DMADD16): Implement using code from gencode.c. * mips.igen: Define vr4100 model. Include vr.igen. start-sanitize-cygnus * vr5400.igen: Move instructions to vr.igen * Makefile.in (IGEN_INCLUDE): Remove vr5400.igen. end-sanitize-cygnus start-sanitize-vr4320 * vr4320.igen: Move instructions to vr.igen. * Makefile.in (IGEN_INCLUDE): Remove vr5320.igen. end-sanitize-vr4320 start-sanitize-sky Fri Jul 24 16:01:03 1998 Ian Carmichael * interp.c (MONITOR_SIZE): Make 1MB monitor for SKY. * mips.igen (BREAK): Fix 0xffff2 monitor call. Slightly less confusing message if not enough --load-next options appear. * sky-pke.h (VUx_MEMx_SRCADDR_START): Move to 0x19800000 range. * sim-main.c (GDB_COMM_AREA): Move to 0x19810000. * sky-gdb.c (init_fifo_bp_cache): Use VIO_BASE when reading GDB area. (resume_handler): Same. (suspend_handler): Same. Wed Jul 22 13:04:13 1998 Frank Ch. Eigler * mips.igen (break): Implement LOAD_INSTRUCTION ("break 0xffff1") to trigger multi-phase load. * sim-main.c: Include sim-assert.h for ASSERT macro. * sim-main.h (PRINTF_INSTRUCTION): Correct bit pattern for "break 0xffff2". Tue Jul 21 18:37:36 1998 Ian Carmichael MMU support. * interp.c (sim_open): Initialize TLB. * interp.c (signal_exceptions): New 5900 handling. * r5900.igen (TLBWR, TLBWI, TLBR, TLBP): Make these work. * sim-main.c (tlb_try_match, tlb_lookup): New functions. (address_translation): Use the TLB. * sim-main.h (r4000_tlb_entry_t): New type. (TLB_*): New constants. (COP0_*): New register names. Sky character I/O device. * sky-psio.c: New file. * sky-psio.h: New file. * Makefile.in: Add sky-psio.o. end-sanitize-sky start-sanitize-r5900 Tue Jul 14 16:10:45 1998 Andrew Cagney * r5900.igen (r59fp_overflow): Replace argument ANS with argument SIGN_P. (r59fp_zero): Ditto. (r59fp_store): Update calls. (DIV.S): Compute 0/0 sign from inputs. Ditto for X/0. end-sanitize-r5900 start-sanitize-branchbug4011 Mon Jun 29 09:31:27 1998 Gavin Koch * interp.c (OPTION_BRANCH_BUG_4011): Add. (mips_option_handler): Handle OPTION_BRANCH_BUG_4011. (mips_options): Define the option. * mips.igen (check_4011_branch_bug): New. (mark_4011_branch_bug): New. (all branch insn): Call mark_branch_bug, and check_branch_bug. * sim-main.h (branchbug4011_option, branchbug4011_last_target, branchbug4011_last_cia, BRANCHBUG4011_OPTION, BRANCHBUG4011_LAST_TARGET, BRANCHBUG4011_LAST_CIA, check_branch_bug, mark_branch_bug): Define. end-sanitize-branchbug4011 Mon Jun 29 09:21:07 1998 Gavin Koch * mips.igen (check_mf_hilo): Correct check. start-sanitize-r5900 Fri Jun 19 14:44:46 1998 Andrew Cagney * sim-main.h (NR_COP0_GPR, COP0_GPR, cop0_gpr, NR_COP0_BP, COP0_BP, cop0_bp, NR_COP0_P, COP0_P, cop0_p): Add 32 COP0 general purpose registers, add 8 COP0 break-point registers, add 64 COP0 performance registers. * interp.c (decode_coproc): Accept any MTC0/MFC0, MTBP/MFBP, MTP* MFP* instructions. Just transfer value to/from corresponding register. * r5900.igen (BC0F, BC0FL, BC0T, BC0TL): Implement, assume COP0 status is always true. (CACHE, TLBP, TPGWI, TLBWR): Treat as NOP. (EI, DI): Set/clear Status-EIE bit. end-sanitize-r5900 start-sanitize-sky Fri Jun 19 14:44:46 1998 Andrew Cagney * mips.igen (BC0F, BC0FL, BC0T, BC0TL): Move to sky code to r5900.igen. end-sanitize-sky Wed Jun 17 12:20:49 1998 Andrew Cagney start-sanitize-sky * sky-vu.c (vu0_read_cop2_register, vu0_write_cop2_register): Call ASSERT not assert. * sky-gdb.c: Include "sim-assert.h". end-sanitize-sky * sim-main.h (interrupt_event): Add prototype. * dv-tx3904tmr.c (tx3904tmr_io_write_buffer): Delete unused register_ptr, register_value. (deliver_tx3904tmr_tick): Fix types passed to printf fmt. * sim-main.h (tracefh): Make extern. Tue Jun 16 14:39:00 1998 Frank Ch. Eigler * dv-tx3904tmr.c: Deschedule timer event after dispatching. Reduce unnecessarily high timer event frequency. * dv-tx3904cpu.c: Ditto for interrupt event. start-sanitize-sky Tue Jun 16 14:12:09 1998 Frank Ch. Eigler * interp.c (decode_coproc): Removed COP2 branches. * r5900.igen: Moved COP2 branch instructions here. * mips.igen: Restricted COPz == COP2 bit pattern to exclude COP2 branches. end-sanitize-sky Wed Jun 10 13:22:32 1998 Frank Ch. Eigler * interp.c (decode_coproc): For TX39, add stub COP0 register #7, to allay warnings. (interrupt_event): Made non-static. * dv-tx3904tmr.c (deliver_tx3904tmr_tick): Correct accidental interchange of configuration values for external vs. internal clock dividers. Tue Jun 9 12:46:24 1998 Ian Carmichael * mips.igen (BREAK): Moved code to here for simulator-reserved break instructions. * gencode.c (build_instruction): Ditto. * interp.c (signal_exception): Code moved from here. Non- reserved instructions now use exception vector, rather than halting sim. * sim-main.h: Moved magic constants to here. Tue Jun 9 12:29:50 1998 Frank Ch. Eigler * dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE register upon non-zero interrupt event level, clear upon zero event value. * dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal by passing zero event value. (*_io_{read,write}_buffer): Endianness fixes. * dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes. (deliver_*_tick): Reduce sim event interval to 75% of count interval. * interp.c (sim_open): Added jmr3904pal board type that adds PAL-based serial I/O and timer module at base address 0xFFFF0000. Tue Jun 9 11:52:29 1998 Gavin Koch * mips.igen (SWC1) : Correct the handling of ReverseEndian and BigEndianCPU. Tue Jun 9 11:40:57 1998 Gavin Koch * configure.in (mips_fpu_bitsize) : Set this correctly for 32-bit mips parts. * configure: Update. Thu Jun 4 15:37:33 1998 Frank Ch. Eigler * dv-tx3904tmr.c: New file - implements tx3904 timer. * dv-tx3904{irc,cpu}.c: Mild reformatting. * configure.in: Include tx3904tmr in hw_device list. * configure: Rebuilt. * interp.c (sim_open): Instantiate three timer instances. Fix address typo of tx3904irc instance. start-sanitize-r5900 Thu Jun 4 16:47:27 1998 Andrew Cagney * mips.igen (check_mt_hilo): 2.1 of r5900 spec stalls for HILO. Select corresponding check_mt_hilo function. (check_mult_hilo, check_div_hilo, check_mf_hilo, check_mt_hilo): Ditto. * r5900.igen (check_mult_hilo_hi1lo1, check_div_hilo_hi1lo1): Mark as r5900 specific. end-sanitize-r5900 Tue Jun 2 15:48:02 1998 Ian Carmichael * interp.c (signal_exception): SystemCall exception now uses the exception vector. Mon Jun 1 18:18:26 1998 Frank Ch. Eigler * interp.c (decode_coproc): For TX39, add stub COP0 register #3, to allay warnings. start-sanitize-r5900 Mon Jun 1 10:28:25 1998 Jeffrey A Law (law@cygnus.com) * r5900.igen (rsqrt.s): Update based on r5900 ISA manual version 2.1. (sqrt.s): Likewise. end-sanitize-r5900 Fri May 29 11:40:39 1998 Andrew Cagney * configure.in (sim_igen_filter): Match mips*tx39 not mipst*tx39. Mon May 25 20:47:45 1998 Andrew Cagney * dv-tx3904cpu.c, dv-tx3904irc.c: Rename *_callback to *_method. * dv-tx3904cpu.c, dv-tx3904irc.c: Include hw-main.h and sim-main.h. Declare a struct hw_descriptor instead of struct hw_device_descriptor. Mon May 25 12:41:38 1998 Andrew Cagney * mips.igen (do_store_left, do_load_left): Compute nr of left and right bits and then re-align left hand bytes to correct byte lanes. Fix incorrect computation in do_store_left when loading bytes from second word. Fri May 22 13:34:20 1998 Andrew Cagney * configure.in (SIM_AC_OPTION_HARDWARE): Only enable when tx3904. * interp.c (sim_open): Only create a device tree when HW is enabled. * dv-tx3904irc.c (tx3904irc_finish): Pacify GCC. * interp.c (signal_exception): Ditto. Thu May 21 14:24:11 1998 Gavin Koch * gencode.c: Mark BEGEZALL as LIKELY. Thu May 21 18:57:19 1998 Andrew Cagney * sim-main.h (ALU32_END): Sign extend 32 bit results. * mips.igen (ADD, SUB, ADDI, DADD, DSUB): Trace. start-sanitize-r5900 Thu May 21 17:15:39 1998 Andrew Cagney * interp.c (sim_fetch_register): Convert internal r5900 regs to target byte order end-sanitize-r5900 Mon May 18 18:22:42 1998 Frank Ch. Eigler * configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware modules. Recognize TX39 target with "mips*tx39" pattern. * configure: Rebuilt. * sim-main.h (*): Added many macros defining bits in TX39 control registers. (SignalInterrupt): Send actual PC instead of NULL. (SignalNMIReset): New exception type. * interp.c (board): New variable for future use to identify a particular board being simulated. (mips_option_handler,mips_options): Added "--board" option. (interrupt_event): Send actual PC. (sim_open): Make memory layout conditional on board setting. (signal_exception): Initial implementation of hardware interrupt handling. Accept another break instruction variant for simulator exit. (decode_coproc): Implement RFE instruction for TX39. (mips.igen): Decode RFE instruction as such. * configure.in (tx3904cpu,tx3904irc): Added devices for tx3904. * interp.c: Define "jmr3904" and "jmr3904debug" board types and bbegin to implement memory map. * dv-tx3904cpu.c: New file. * dv-tx3904irc.c: New file. Wed May 13 14:40:11 1998 Gavin Koch * mips.igen (check_mt_hilo): Create a separate r3900 version. start-sanitize-r5900 Wed May 13 14:27:53 1998 Gavin Koch * r5900.igen: Replace the calls and the definition of the function check_op_hilo_hi1lo1 with the pair check_mult_hilo_hi1lo1 and check_mult_hilo_hi1lo1. end-sanitize-r5900 Wed May 13 14:11:46 1998 Gavin Koch * tx.igen (madd,maddu): Replace calls to check_op_hilo with calls to check_div_hilo. Wed May 13 09:59:27 1998 Gavin Koch * mips/mips.igen (check_op_hilo,check_mult_hilo,check_div_hilo): Replace check_op_hilo with check_mult_hilo and check_div_hilo. Add special r3900 version of do_mult_hilo. (do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo with calls to check_mult_hilo. (do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo with calls to check_div_hilo. Tue May 12 15:22:11 1998 Andrew Cagney * configure.in (SUBTARGET_R3900): Define for mipstx39 target. Document a replacement. Fri May 8 17:48:19 1998 Ian Carmichael * interp.c (sim_monitor): Make mon_printf work. Wed May 6 19:42:19 1998 Doug Evans * sim-main.h (INSN_NAME): New arg `cpu'. start-sanitize-sky Thu Apr 30 18:51:26 1998 Andrew Cagney * sky-libvpe.c (FMAdd, FMSub): Replace r59fp_op3 call with r59fp_mula. end-sanitize-sky start-sanitize-r5900 Wed Apr 29 22:54:45 1998 Andrew Cagney * sim-main.h (R5900_FP_MAX, R5900_FP_MIN): Define. * r5900.igen (r59fp_overflow): Use. * r5900.igen (r59fp_op3): Rename to (r59fp_mula): This, delete opm argument. (MADD.S, MADDA.S, MSUB.S, MSUBS.S): Update. (r59fp_mula): Overflowing product propogates through to result. (r59fp_mula): ACC to the MAX propogates to result. (r59fp_mula): Underflow during multiply only sets SU. end-sanitize-r5900 Tue Apr 28 18:33:31 1998 Geoffrey Noer * configure: Regenerated to track ../common/aclocal.m4 changes. Sun Apr 26 15:31:55 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Sun Apr 26 15:20:01 1998 Tom Tromey * acconfig.h: New file. * configure.in: Reverted change of Apr 24; use sinclude again. Fri Apr 24 14:16:40 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Fri Apr 24 11:19:20 1998 Tom Tromey * configure.in: Don't call sinclude. Fri Apr 24 11:35:01 1998 Andrew Cagney * mips.igen (do_store_left): Pass 0 not NULL to store_memory. Tue Apr 21 11:59:50 1998 Andrew Cagney * mips.igen (ERET): Implement. * interp.c (decode_coproc): Return sign-extended EPC. * mips.igen (ANDI, LUI, MFC0): Add tracing code. * interp.c (signal_exception): Do not ignore Trap. (signal_exception): On TRAP, restart at exception address. (HALT_INSTRUCTION, HALT_INSTRUCTION_MASK): Define. (signal_exception): Update. (sim_open): Patch V_COMMON interrupt vector with an abort sequence so that TRAP instructions are caught. Mon Apr 20 11:26:55 1998 Andrew Cagney * sim-main.h (struct hilo_access, struct hilo_history): Define, contains HI/LO access history. (struct _sim_cpu): Make hiaccess and loaccess of type hilo_access. (HIACCESS, LOACCESS): Delete, replace with (HIHISTORY, LOHISTORY): New macros. (start-sanitize-r5900): (struct sim_5900_cpu): Make hi1access, lo1access of type hilo_access. (HI1ACCESS, LO1ACCESS): Delete, replace with (HI1HISTORY, LO1HISTORY): New macros. (end-sanitize-r5900): (CHECKHILO): Delete all, moved to mips.igen * gencode.c (build_instruction): Do not generate checks for correct HI/LO register usage. * interp.c (old_engine_run): Delete checks for correct HI/LO register usage. * mips.igen (check_mt_hilo, check_mf_hilo, check_op_hilo, check_mf_cycles): New functions. (do_mfhi, do_mflo, "mthi", "mtlo", do_ddiv, do_ddivu, do_div, do_divu, domultx, do_mult, do_multu): Use. * tx.igen ("madd", "maddu"): Use. (start-sanitize-r5900): r5900.igen: Update all HI/LO checks. ("mfhi1", "mflo1", "mthi1", "mthi1", "pmfhi", "pmflo", "pmfhl", "pmthi", "pmtlo", "mpthl"): Check MF/MT HI/LO. ("mult1", "div1", "divu1", "multu1", "madd1", "maddu1", "pdivbw", "pdivuw", "pdivw", "phmaddh", "phmsubh", "pmaddh", "madduw", "pmaddw", "pmsubh", "pmsubw", "pmulth", "pmultuw", "pmultw"): Check HI/LO op. (end-sanitize-r5900): start-sanitize-sky Mon Apr 20 18:39:47 1998 Frank Ch. Eigler * interp.c (decode_coproc): Correct CMFC2/QMTC2 GPR access. * r5900.igen (LQ,SQ): Use a pair of 64-bit accesses instead of a single 128-bit access. end-sanitize-sky start-sanitize-sky Fri Apr 17 14:50:39 1998 Frank Ch. Eigler * r5900.igen (COP_[LS]Q): Transfer COP2 quadwords. * interp.c (cop_[ls]q): Fixes corresponding to above. end-sanitize-sky start-sanitize-sky Thu Apr 16 15:24:14 1998 Frank Ch. Eigler * interp.c (decode_coproc): Adapt COP2 micro interlock to clarified specs. Reset "M" bit; exit also on "E" bit. end-sanitize-sky start-sanitize-r5900 Thu Apr 16 10:40:29 1998 Andrew Cagney * r5900.igen (CFC1, CTC1): Implement R5900 specific version. * mips.igen (CFC1, CTC1): R5900 des not use generic version. * r5900.igen (r59fp_unpack): New function. (r59fp_op1, r59fp_op2, r59fp_op3, C.cond.S, CVT.S.W, DIV.S, RSQRT.S, SQRT.S): Use. (r59fp_zero): New function. (r59fp_overflow): Generate r5900 specific overflow value. (r59fp_store): Re-write, overflow to MAX_R5900_FP value, underflow to zero. (CVT.S.W, CVT.W.S): Exchange implementations. * sim-main.h (R5900_EXPMAX, R5900_EXPMIN, R5900_EXPBIAS): Defile. end-sanitize-r5900 start-sanitize-tx19 Thu Apr 16 09:14:44 1998 Andrew Cagney * configure.in (tx19, sim_use_gen): Switch to igen. * configure: Re-build. end-sanitize-tx19 start-sanitize-sky Wed Apr 15 12:41:18 1998 Frank Ch. Eigler * interp.c (decode_coproc): Make COP2 branch code compile after igen signature changes. end-sanitize-sky Wed Apr 15 18:31:54 1998 Andrew Cagney * mips.igen (DSRAV): Use function do_dsrav. (SRAV): Use new function do_srav. * m16.igen (BEQZ, BNEZ): Compare GPR[TRX] not GPR[RX]. (B): Sign extend 11 bit immediate. (EXT-B*): Shift 16 bit immediate left by 1. (ADDIU*): Don't sign extend immediate value. Wed Apr 15 10:32:15 1998 Andrew Cagney * m16run.c (sim_engine_run): Restore CIA after handling an event. start-sanitize-tx19 * mips.igen (mtc0): Valid tx19 instruction. end-sanitize-tx19 * sim-main.h (DELAY_SLOT, NULLIFY_NEXT_INSTRUCTION): For IGEN, use functions. * mips.igen (delayslot32, nullify_next_insn): New functions. (m16.igen): Always include. (do_*): Add more tracing. * m16.igen (delayslot16): Add NIA argument, could be called by a 32 bit MIPS16 instruction. * interp.c (ifetch16): Move function from here. * sim-main.c (ifetch16): To here. * sim-main.c (ifetch16, ifetch32): Update to match current implementations of LH, LW. (signal_exception): Don't print out incorrect hex value of illegal instruction. Wed Apr 15 00:17:25 1998 Andrew Cagney * m16run.c (sim_engine_run): Use IMEM16 and IMEM32 to fetch an instruction. * m16.igen: Implement MIPS16 instructions. * mips.igen (do_addiu, do_addu, do_and, do_daddiu, do_daddu, do_ddiv, do_ddivu, do_div, do_divu, do_dmultx, do_dmultu, do_srav, do_dsubu, do_mfhi, do_mflo, do_mult, do_multu, do_nor, do_or, do_sll, do_sllv, do_slt, do_slti, do_sltiu, do_sltu, do_sra, do_srl, do_srlv, do_subu, do_xor, do_xori): New functions. Move bodies of corresponding code from 32 bit insn to these. Also used by MIPS16 versions of functions. * sim-main.h (RAIDX, T8IDX, T8, SPIDX): Define. (IMEM16): Drop NR argument from macro. start-sanitize-sky Mon Apr 13 16:28:52 1998 Frank Ch. Eigler * interp.c (decode_coproc): Add proper 1000000 bit-string at top of VU lower instruction. end-sanitize-sky start-sanitize-sky Thu Apr 9 16:38:23 1998 Frank Ch. Eigler * r5900.igen (LQC,SQC): Adapted code to DOUBLEWORD accesses instead of QUADWORD. * sim-main.h: Removed attempt at allowing 128-bit access. end-sanitize-sky start-sanitize-sky Wed Apr 8 18:12:13 1998 Frank Ch. Eigler * Makefile.in (SIM_SKY_OBJS): Added sky-vudis.o. * interp.c (decode_coproc): Refer to VU CIA as a "special" register, not as a "misc" register. Aha. Add activity assertions after VCALLMS* instructions. end-sanitize-sky start-sanitize-sky Tue Apr 7 18:32:49 1998 Frank Ch. Eigler * interp.c (decode_coproc): Do not apply superfluous E (end) flag to upper code of generated VU instruction. end-sanitize-sky start-sanitize-sky Mon Apr 6 19:55:56 1998 Frank Ch. Eigler * interp.c (cop_[ls]q): Replaced stub with proper COP2 code. * sim-main.h (LOADADDRMASK): Redefine to allow 128-bit accesses for TARGET_SKY. * r5900.igen (SQC2): Thinko. end-sanitize-sky start-sanitize-sky Sun Apr 5 12:05:44 1998 Frank Ch. Eigler * interp.c (*): Adapt code to merged VU device & state structs. (decode_coproc): Execute COP2 each macroinstruction without pipelining, by stepping VU to completion state. Adapted to read_vu_*_reg style of register access. * mips.igen ([SL]QC2): Removed these COP2 instructions. * r5900.igen ([SL]QC2): Transplanted these COP2 instructions here. * sim-main.h (cop_[ls]q): Enclosed in TARGET_SKY guards. end-sanitize-sky Sat Apr 4 22:39:50 1998 Andrew Cagney * Makefile.in (SIM_OBJS): Add sim-main.o. * sim-main.h (address_translation, load_memory, store_memory, cache_op, sync_operation, prefetch, ifetch32, pending_tick): Mark as INLINE_SIM_MAIN. (pr_addr, pr_uword64): Declare. (sim-main.c): Include when H_REVEALS_MODULE_P. * interp.c (address_translation, load_memory, store_memory, cache_op, sync_operation, prefetch, ifetch32, pending_tick): Move from here. * sim-main.c: To here. Fix compilation problems. * configure.in: Enable inlining. * configure: Re-config. Sat Apr 4 20:36:25 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Apr 3 04:32:35 1998 Andrew Cagney * mips.igen: Include tx.igen. * Makefile.in (IGEN_INCLUDE): Add tx.igen. * tx.igen: New file, contains MADD and MADDU. * interp.c (load_memory): When shifting bytes, use LOADDRMASK not the hardwired constant `7'. (store_memory): Ditto. (LOADDRMASK): Move definition to sim-main.h. mips.igen (MTC0): Enable for r3900. (ADDU): Add trace. mips.igen (do_load_byte): Delete. (do_load, do_store, do_load_left, do_load_write, do_store_left, do_store_right): New functions. (SW*, LW*, SD*, LD*, SH, LH, SB, LB): Use. configure.in: Let the tx39 use igen again. configure: Update. Thu Apr 2 10:59:39 1998 Andrew Cagney * interp.c (sim_monitor): get_mem_info returns a 4 byte quantity, not an address sized quantity. Return zero for cache sizes. Wed Apr 1 23:47:53 1998 Andrew Cagney * mips.igen (r3900): r3900 does not support 64 bit integer operations. start-sanitize-sky Wed Apr 1 08:20:31 1998 Frank Ch. Eigler * mips.igen (SQC2/LQC2): Make bodies sky-target-only also. end-sanitize-sky start-sanitize-sky Mon Mar 30 18:41:43 1998 Frank Ch. Eigler * interp.c (decode_coproc): Continuing COP2 work. (cop_[ls]q): Make sky-target-only. * sim-main.h (COP_[LS]Q): Make sky-target-only. end-sanitize-sky Mon Mar 30 14:46:05 1998 Gavin Koch * configure.in (mipstx39*-*-*): Use gencode simulator rather than igen one. * configure : Rebuild. start-sanitize-sky Sun Mar 29 17:50:11 Frank Ch. Eigler * interp.c (decode_coproc): Added a missing TARGET_SKY check around COP2 implementation skeleton. end-sanitize-sky start-sanitize-sky Fri Mar 27 16:19:29 1998 Frank Ch. Eigler * Makefile.in (SIM_SKY_OBJS): Replaced sky-vu[01].o with sky-vu.o. * interp.c (sim_{load,store}_register): Use new vu[01]_device static to access VU registers. (decode_coproc): Added skeleton of sky COP2 (VU) instruction decoding. Work in progress. * mips.igen (LDCzz, SDCzz): Removed *5900 case for this overlapping/redundant bit pattern. (LQC2, SQC2): Added *5900 COP2 instruction skeleta. Work in progress. * sim-main.h (status_CU[012]): Added COP[n]-enabled flags for status register. * interp.c (cop_lq, cop_sq): New functions for future 128-bit access to coprocessor registers. * sim-main.h (COP_LQ, COP_SQ): New macro front-ends for above. end-sanitize-sky Fri Mar 27 16:15:52 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Mar 27 15:01:50 1998 Andrew Cagney * interp.c (mips_option_handler): Iterate over MAX_NR_PROCESSORS. Wed Mar 25 16:44:27 1998 Ian Carmichael * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Regenerated to track ../common/aclocal.m4 changes. Wed Mar 25 12:35:29 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Mar 25 10:05:46 1998 Andrew Cagney * interp.c (Max, Min): Comment out functions. Not yet used. start-sanitize-vr4320 Wed Mar 25 10:04:13 1998 Andrew Cagney * vr4320.igen (DCLZ): Pacify GCC, 64 bit arg, int format. end-sanitize-vr4320 Wed Mar 18 12:38:12 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Mar 17 19:05:20 1998 Frank Ch. Eigler * Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added configurable settings for stand-alone simulator. start-sanitize-sky * configure.in: Added --with-sim-gpu2 option to specify path of sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and links/compiles stand-alone simulator with this library. * interp.c (MEM_SIZE): Increased default sky memory size to 16MB. end-sanitize-sky * configure.in: Added X11 search, just in case. * configure: Regenerated. Wed Mar 11 14:09:10 1998 Andrew Cagney * interp.c (sim_write, sim_read, load_memory, store_memory): Replace sim_core_*_map with read_map, write_map, exec_map resp. start-sanitize-vr4320 Tue Mar 10 10:32:22 1998 Gavin Koch * vr4320.igen (clz,dclz) : Added. (dmac): Replaced 99, with LO. end-sanitize-vr4320 start-sanitize-cygnus Fri Mar 6 08:30:58 1998 Andrew Cagney * mdmx.igen (SHFL.REPA.fmt, SHFL.REPB.fmt): Fix bit fields. end-sanitize-cygnus start-sanitize-vr4320 Tue Mar 3 11:56:29 1998 Gavin Koch * vr4320.igen: New file. * Makefile.in (vr4320.igen) : Added. * configure.in (mips64vr4320-*-*): Added. * configure : Rebuilt. * mips.igen : Correct the bfd-names in the mips-ISA model entries. Add the vr4320 model entry and mark the vr4320 insn as necessary. end-sanitize-vr4320 Tue Mar 3 13:58:43 1998 Andrew Cagney * sim-main.h (GETFCC): Return an unsigned value. start-sanitize-r5900 * r5900.igen: Use an unsigned array index variable `i'. (QFSRV): Ditto for variable bytes. end-sanitize-r5900 Tue Mar 3 13:21:37 1998 Andrew Cagney * mips.igen (DIV): Fix check for -1 / MIN_INT. (DADD): Result destination is RD not RT. start-sanitize-r5900 * r5900.igen (DIV1): Fix check for -1 / MIN_INT. (DIVU1): Don't check for MIN_INT / -1 as performing unsigned divide. end-sanitize-r5900 Fri Feb 27 13:49:49 1998 Andrew Cagney * sim-main.h (HIACCESS, LOACCESS): Always define. * mdmx.igen (Maxi, Mini): Rename Max, Min. * interp.c (sim_info): Delete. Fri Feb 27 18:41:01 1998 Doug Evans * interp.c (DECLARE_OPTION_HANDLER): Use it. (mips_option_handler): New argument `cpu'. (sim_open): Update call to sim_add_option_table. Wed Feb 25 18:56:22 1998 Andrew Cagney * mips.igen (CxC1): Add tracing. start-sanitize-r5900 Wed Feb 25 13:59:03 1998 Andrew Cagney * r5900.igen (StoreFP): Delete. (r59fp_store, r59fp_overflow, r59fp_op1, r59fp_op2, r59fp_op3): New functions. (rsqrt.s, sqrt.s): Implement. (r59cond): New function. (C.COND.S): Call r59cond in assembler line. (cvt.w.s, cvt.s.w): Implement. * mips.igen (rsqrt.fmt, sqrt.fmt, cvt.*.*): Remove from r5900 instruction set. * sim-main.h: Define an enum of r5900 FCSR bit fields. end-sanitize-r5900 start-sanitize-r5900 Tue Feb 24 14:44:18 1998 Andrew Cagney * r5900.igen: Add tracing to all p* instructions. Tue Feb 24 02:47:33 1998 Andrew Cagney * interp.c (sim_store_register, sim_fetch_register): Pull swifty to get gdb talking to re-aranged sim_cpu register structure. end-sanitize-r5900 Fri Feb 20 17:43:21 1998 Andrew Cagney * sim-main.h (Max, Min): Declare. * interp.c (Max, Min): New functions. * mips.igen (BC1): Add tracing. start-sanitize-cygnus Fri Feb 20 16:27:17 1998 Andrew Cagney * mdmx.igen: Tag all functions as requiring either with mdmx or vr5400 processor. end-sanitize-cygnus start-sanitize-r5900 Fri Feb 20 15:55:51 1998 Andrew Cagney * configure.in (SIM_AC_OPTION_FLOAT): For r5900, set FP bit size to 32. (SIM_AC_OPTION_BITSIZE): For r5900, set nr address bits to 32. * mips.igen (C.cond.fmt, ..): Not part of r5900 insn set. * r5900.igen: Rewrite. * sim-main.h: Move r5900 registers to a separate _sim_r5900_cpu struct. (GPR_SB, GPR_SH, GPR_SW, GPR_SD, GPR_UB, GPR_UH, GPR_UW, GPR_UD): Define in terms of GPR/GPR1 instead of REGISTERS/REGISTERS.1 end-sanitize-r5900 Thu Feb 19 14:50:00 1998 John Metzler * interp.c Added memory map for stack in vr4100 Thu Feb 19 10:21:21 1998 Gavin Koch * interp.c (load_memory): Add missing "break"'s. Tue Feb 17 12:45:35 1998 Andrew Cagney * interp.c (sim_store_register, sim_fetch_register): Pass in length parameter. Return -1. Tue Feb 10 11:57:40 1998 Ian Carmichael * interp.c: Added hardware init hook, fixed warnings. Sat Feb 7 17:16:20 1998 Andrew Cagney * Makefile.in (itable.h itable.c): Depend on SIM_@sim_gen@_ALL. Tue Feb 3 11:36:02 1998 Andrew Cagney * interp.c (ifetch16): New function. * sim-main.h (IMEM32): Rename IMEM. (IMEM16_IMMED): Define. (IMEM16): Define. (DELAY_SLOT): Update. * m16run.c (sim_engine_run): New file. * m16.igen: All instructions except LB. (LB): Call do_load_byte. * mips.igen (do_load_byte): New function. (LB): Call do_load_byte. * mips.igen: Move spec for insn bit size and high bit from here. * Makefile.in (tmp-igen, tmp-m16): To here. * m16.dc: New file, decode mips16 instructions. * Makefile.in (SIM_NO_ALL): Define. (tmp-m16): Generate both 16 bit and 32 bit simulator engines. start-sanitize-tx19 * m16.igen: Mark all mips16 insns as being part of the tx19 insn set. end-sanitize-tx19 Tue Feb 3 11:28:00 1998 Andrew Cagney * configure.in (mips_fpu_bitsize): For tx39, restrict floating point unit to 32 bit registers. * configure: Re-generate. Sun Feb 1 15:47:14 1998 Andrew Cagney * configure.in (sim_use_gen): Make IGEN the default simulator generator for generic 32 and 64 bit mips targets. * configure: Re-generate. Sun Feb 1 16:52:37 1998 Andrew Cagney * sim-main.h (SizeFGR): Determine from floating-point and not gpr bitsize. * interp.c (sim_fetch_register, sim_store_register): Read/write FGR from correct location. (sim_open): Set size of FGR's according to WITH_TARGET_FLOATING_POINT_BITSIZE. * sim-main.h (FGR): Store floating point registers in a separate array. Sun Feb 1 16:47:51 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. start-sanitize-cygnus * mdmx.igen: Mark all instructions as 64bit/fp specific. end-sanitize-cygnus Tue Feb 3 00:10:50 1998 Andrew Cagney * interp.c (ColdReset): Call PENDING_INVALIDATE. * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Call PENDING_TICK. * interp.c (pending_tick): New function. Deliver pending writes. * sim-main.h (PENDING_FILL, PENDING_TICK, PENDING_SCHED, PENDING_BIT, PENDING_INVALIDATE): Re-write pipeline code so that it can handle mixed sized quantites and single bits. Mon Feb 2 17:43:15 1998 Andrew Cagney * interp.c (oengine.h): Do not include when building with IGEN. (sim_open): Replace GPRLEN by WITH_TARGET_WORD_BITSIZE. (sim_info): Ditto for PROCESSOR_64BIT. (sim_monitor): Replace ut_reg with unsigned_word. (*): Ditto for t_reg. (LOADDRMASK): Define. (sim_open): Remove defunct check that host FP is IEEE compliant, using software to emulate floating point. (value_fpr, ...): Always compile, was conditional on HASFPU. Sun Feb 1 11:15:29 1998 Andrew Cagney * sim-main.h (sim_state): Make the cpu array MAX_NR_PROCESSORS in size. * interp.c (SD, CPU): Define. (mips_option_handler): Set flags in each CPU. (interrupt_event): Assume CPU 0 is the one being iterrupted. (sim_close): Do not clear STATE, deleted anyway. (sim_write, sim_read): Assume CPU zero's vm should be used for data transfers. (sim_create_inferior): Set the PC for all processors. (sim_monitor, store_word, load_word, mips16_entry): Add cpu argument. (mips16_entry): Pass correct nr of args to store_word, load_word. (ColdReset): Cold reset all cpu's. (signal_exception): Pass cpu to sim_monitor & mips16_entry. (sim_monitor, load_memory, store_memory, signal_exception): Use `CPU' instead of STATE_CPU. * sim-main.h: Replace uses of STATE_CPU with CPU. Replace sd with SD or CPU_. * sim-main.h (signal_exception): Add sim_cpu arg. (SignalException*): Pass both SD and CPU to signal_exception. * interp.c (signal_exception): Update. * sim-main.h (value_fpr, store_fpr, dotrace, ifetch32), interp.c: Ditto (sync_operation, prefetch, cache_op, store_memory, load_memory, address_translation): Ditto (decode_coproc, cop_lw, cop_ld, cop_sw, cop_sd): Ditto. start-sanitize-cygnus * mdmx.igen (get_scale): Pass CPU_ to semantic_illegal instead of `sd'. (ByteAlign): Use StoreFPR, pass args in correct order. end-sanitize-cygnus start-sanitize-r5900 Sun Feb 1 10:59:55 1998 Andrew Cagney * configure.in (sim_igen_filter): For r5900, configure as SMP. end-sanitize-r5900 Sat Jan 31 18:15:41 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Sat Jan 31 14:49:24 1998 Andrew Cagney start-sanitize-r5900 * configure.in (sim_igen_filter): For r5900, use igen. * configure: Re-generate. end-sanitize-r5900 * interp.c (sim_engine_run): Add `nr_cpus' argument. * mips.igen (model): Map processor names onto BFD name. * sim-main.h (CPU_CIA): Delete. (SET_CIA, GET_CIA): Define Wed Jan 21 16:16:27 1998 Andrew Cagney * sim-main.h (GPR_SET): Define, used by igen when zeroing a regiser. * configure.in (default_endian): Configure a big-endian simulator by default. * configure: Re-generate. Mon Jan 19 22:26:29 1998 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Jan 5 20:38:54 1998 Mark Alexander * interp.c (sim_monitor): Handle Densan monitor outbyte and inbyte functions. 1997-12-29 Felix Lee * interp.c (sim_engine_run): msvc cpp barfs on #if (a==b!=c). Wed Dec 17 14:48:20 1997 Jeffrey A Law (law@cygnus.com) * Makefile.in (tmp-igen): Arrange for $zero to always be reset to zero after every instruction. Mon Dec 15 23:17:11 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. start-sanitize-cygnus Sat Dec 13 15:18:51 1997 Andrew Cagney * vr5400.igen (Low32Bits, High32Bits): Sign extend extracted 32 bit values. Fri Dec 12 12:26:07 1997 Jeffrey A Law (law@cygnus.com) * configure.in (sim_igen_filter): Multi-sim vr5000 - vr5000 or vr5400 with the vr5000 as the default. end-sanitize-cygnus Wed Dec 10 17:10:45 1997 Jeffrey A Law (law@cygnus.com) * mips.igen (MSUB): Fix to work like MADD. * gencode.c (MSUB): Similarly. start-sanitize-cygnus Tue Dec 9 12:02:12 1997 Andrew Cagney * configure.in (sim_igen_filter): Multi-sim vr5400 - vr5000 or vr5400. end-sanitize-cygnus Thu Dec 4 09:21:05 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Nov 26 11:00:23 1997 Andrew Cagney * mips.igen (LWC1): Correct assembler - lwc1 not swc1. start-sanitize-cygnus * mdmx.igen (value_vr): Correct sim_io_eprintf format argument. (value_cc, store_cc): Implement. * sim-main.h: Add 8*3*8 bit accumulator. * vr5400.igen: Move mdmx instructins from here * mdmx.igen: To here - new file. Add/fix missing instructions. * mips.igen: Include mdmx.igen. * Makefile.in (IGEN_INCLUDE): Add mdmx.igen. end-sanitize-cygnus Sun Nov 23 01:45:20 1997 Andrew Cagney * sim-main.h (sim-fpu.h): Include. * interp.c (convert, SquareRoot, Recip, Divide, Multiply, Sub, Add, Negate, AbsoluteValue, Equal, Less, Infinity, NaN): Rewrite using host independant sim_fpu module. Thu Nov 20 19:56:22 1997 Andrew Cagney * interp.c (signal_exception): Report internal errors with SIGABRT not SIGQUIT. * sim-main.h (C0_CONFIG): New register. (signal.h): No longer include. * interp.c (decode_coproc): Allow access C0_CONFIG to register. Tue Nov 18 15:33:48 1997 Doug Evans * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS). Fri Nov 14 11:56:48 1997 Andrew Cagney * mips.igen: Tag vr5000 instructions. (ANDI): Was missing mipsIV model, fix assembler syntax. (do_c_cond_fmt): New function. (C.cond.fmt): Handle mips I-III which do not support CC field separatly. (bc1): Handle mips IV which do not have a delaed FCC separatly. (SDR): Mask paddr when BigEndianMem, not the converse as specified in IV3.2 spec. (DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle vr5000 which saves LO in a GPR separatly. * configure.in (enable-sim-igen): For vr5000, select vr5000 specific instructions. * configure: Re-generate. Wed Nov 12 14:42:52 1997 Andrew Cagney * Makefile.in (SIM_OBJS): Add sim-fpu module. * interp.c (store_fpr), sim-main.h: Add separate fmt_uninterpreted_32 and fmt_uninterpreted_64 bit cases to switch. Convert to fmt_formatted, * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Define, * mips.igen (SWR): Mask paddr when BigEndianMem, not the converse as specified in IV3.2 spec. (MTC1, DMTC1): Call StoreFPR to store the GPR in the FPR. Tue Nov 11 12:38:23 1997 Andrew Cagney * mips.igen: Delay slot branches add OFFSET to NIA not CIA. (MFC0, MTC0, SWC1, LWC1, SDC1, LDC1): Implement. (start-sanitize-r5900): (LWXC1, SWXC1): Delete from r5900 instruction set. (end-sanitize-r5900): (MTC1, MFC1, DMTC1, DMFC1, CFC1, CTC1): Implement separate non PENDING_FILL versions of instructions. Simplify. (X): New function. (MULT, MULTU): Implement separate RD==0 and RD!=0 versions of instructions. (BEQZ, ..., SLT, SLTI, TLT, TLE, TLI, ...): Explicitly cast GPR to a signed value. (MTHI, MFHI): Disable code checking HI-LO. * sim-main.h (dotrace,tracefh), interp.c: Make dotrace & tracefh global. (NULLIFY_NEXT_INSTRUCTION): Call dotrace. Thu Nov 6 16:36:35 1997 Andrew Cagney * gencode.c (build_mips16_operands): Replace IPC with cia. * interp.c (sim_monitor, signal_exception, cache_op, store_fpr, value_fpr, cop_ld, cop_lw, cop_sw, cop_sd, decode_coproc): Replace IPC to `cia'. (UndefinedResult): Replace function with macro/function combination. (sim_engine_run): Don't save PC in IPC. * sim-main.h (IPC): Delete. start-sanitize-cygnus * vr5400.igen (vr): Add missing cia argument to value_fpr. (do_select): Rename function select. end-sanitize-cygnus * interp.c (signal_exception, store_word, load_word, address_translation, load_memory, store_memory, cache_op, prefetch, sync_operation, ifetch, value_fpr, store_fpr, convert, cop_lw, cop_ld, cop_sw, cop_sd, decode_coproc, sim_monitor): Add current instruction address - cia - argument. (sim_read, sim_write): Call address_translation directly. (sim_engine_run): Rename variable vaddr to cia. (signal_exception): Pass cia to sim_monitor * sim-main.h (SignalException, LoadWord, StoreWord, CacheOp, Prefetch, SyncOperation, ValueFPR, StoreFPR, Convert, COP_LW, COP_LD, COP_SW, COP_SD, DecodeCoproc): Update. * sim-main.h (SignalExceptionSimulatorFault): Delete definition. * interp.c (sim_open): Replace SignalExceptionSimulatorFault with SIM_ASSERT. * interp.c (signal_exception): Pass restart address to sim_engine_restart. * Makefile.in (semantics.o, engine.o, support.o, itable.o, idecode.o): Add dependency. * sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESUME_HOOK): Delete definitions (DELAY_SLOT): Update NIA not PC with branch address. (NULLIFY_NEXT_INSTRUCTION): Set NIA to instruction after next. * mips.igen: Use CIA not PC in branch calculations. (illegal): Call SignalException. (BEQ, ADDIU): Fix assembler. Wed Nov 5 12:19:56 1997 Andrew Cagney * m16.igen (JALX): Was missing. * configure.in (enable-sim-igen): New configuration option. * configure: Re-generate. * sim-main.h (MAX_INSNS, INSN_NAME): Define. * interp.c (load_memory, store_memory): Delete parameter RAW. (sim_read, sim_write): Use sim_core_{read,write}_buffer directly bypassing {load,store}_memory. * sim-main.h (ByteSwapMem): Delete definition. * Makefile.in (SIM_OBJS): Add sim-memopt module. * interp.c (sim_do_command, sim_commands): Delete mips specific commands. Handled by module sim-options. * sim-main.h (SIM_HAVE_FLATMEM): Undefine, use sim-core.o module. (WITH_MODULO_MEMORY): Define. * interp.c (sim_info): Delete code printing memory size. * interp.c (mips_size): Nee sim_size, delete function. (power2): Delete. (monitor, monitor_base, monitor_size): Delete global variables. (sim_open, sim_close): Delete code creating monitor and other memory regions. Use sim-memopts module, via sim_do_commandf, to manage memory regions. (load_memory, store_memory): Use sim-core for memory model. * interp.c (address_translation): Delete all memory map code except line forcing 32 bit addresses. Wed Nov 5 11:21:11 1997 Andrew Cagney * sim-main.h (WITH_TRACE): Delete definition. Enables common trace options. * interp.c (logfh, logfile): Delete globals. (sim_open, sim_close): Delete code opening & closing log file. (mips_option_handler): Delete -l and -n options. (OPTION mips_options): Ditto. * interp.c (OPTION mips_options): Rename option trace to dinero. (mips_option_handler): Update. Wed Nov 5 09:35:59 1997 Andrew Cagney * interp.c (fetch_str): New function. (sim_monitor): Rewrite using sim_read & sim_write. (sim_open): Check magic number. (sim_open): Write monitor vectors into memory using sim_write. (MONITOR_BASE, MONITOR_SIZE, MEM_SIZE): Define. (sim_read, sim_write): Simplify - transfer data one byte at a time. (load_memory, store_memory): Clarify meaning of parameter RAW. * sim-main.h (isHOST): Defete definition. (isTARGET): Mark as depreciated. (address_translation): Delete parameter HOST. * interp.c (address_translation): Delete parameter HOST. start-sanitize-tx49 Wed Oct 29 14:21:32 1997 Gavin Koch * gencode.c: Add tx49 configury and insns. * configure.in: Add tx49 configury. * configure: Update. end-sanitize-tx49 Wed Oct 29 11:13:56 1997 Andrew Cagney * mips.igen: * Makefile.in (IGEN_INCLUDE): Files included by mips.igen. (tmp-igen, tmp-m16): Depend on IGEN_INCLUDE. Tue Oct 28 11:06:47 1997 Andrew Cagney * mips.igen: Add model filter field to records. Mon Oct 27 17:53:59 1997 Andrew Cagney * Makefile.in (SIM_NO_CFLAGS): Define. Define WITH_IGEN=0. interp.c (sim_engine_run): Do not compile function sim_engine_run when WITH_IGEN == 1. * configure.in (sim_igen_flags, sim_m16_flags): Set according to target architecture. Makefile.in (tmp-igen, tmp-m16): Drop -F and -M options to igen. Replace with configuration variables sim_igen_flags / sim_m16_flags. start-sanitize-r5900 * r5900.igen: New file. Copy r5900 insns here. end-sanitize-r5900 start-sanitize-cygnus * vr5400.igen: New file. end-sanitize-cygnus * m16.igen: New file. Copy mips16 insns here. * mips.igen: From here. Mon Oct 27 13:53:59 1997 Andrew Cagney start-sanitize-cygnus * mips.igen: Tag all mipsIV instructions with vr5400 model. * configure.in: Add mips64vr5400 target. * configure: Re-generate. end-sanitize-cygnus * Makefile.in (SIM_NO_OBJ): Define, move SIM_M16_OBJ, SIM_IGEN_OBJ to top. (tmp-igen, tmp-m16): Pass -I srcdir to igen. Sat Oct 25 16:51:40 1997 Gavin Koch * gencode.c (build_instruction): Follow sim_write's lead in using BigEndianMem instead of !ByteSwapMem. Fri Oct 24 17:41:49 1997 Andrew Cagney * configure.in (sim_gen): Dependent on target, select type of generator. Always select old style generator. configure: Re-generate. Makefile.in (tmp-igen, tmp-m16, clean-m16, clean-igen): New targets. (SIM_M16_CFLAGS, SIM_M16_ALL, SIM_M16_OBJ, BUILT_SRC_FROM_M16, SIM_IGEN_CFLAGS, SIM_IGEN_ALL, SIM_IGEN_OBJ, BUILT_SRC_FROM_IGEN, IGEN_TRACE, IGEN_INSN, IGEN_DC): Define (SIM_EXTRA_CFLAGS, SIM_EXTRA_ALL, SIM_OBJS): Add member SIM_@sim_gen@_*, set by autoconf. Wed Oct 22 12:52:06 1997 Andrew Cagney * sim-main.h (NULLIFY_NEXT_INSTRUCTION, DELAY_SLOT): Define. * interp.c (ColdReset): Remove #ifdef HASFPU, check CURRENT_FLOATING_POINT instead. * interp.c (ifetch32): New function. Fetch 32 bit instruction. (address_translation): Raise exception InstructionFetch when translation fails and isINSTRUCTION. * interp.c (sim_open, sim_write, sim_monitor, store_word, sim_engine_run): Change type of of vaddr and paddr to address_word. (address_translation, prefetch, load_memory, store_memory, cache_op): Change type of vAddr and pAddr to address_word. * gencode.c (build_instruction): Change type of vaddr and paddr to address_word. Mon Oct 20 15:29:04 1997 Andrew Cagney * sim-main.h (ALU64_END, ALU32_END): Use ALU*_OVERFLOW_RESULT macro to obtain result of ALU op. Tue Oct 21 17:39:14 1997 Andrew Cagney * interp.c (sim_info): Call profile_print. Mon Oct 20 13:31:20 1997 Andrew Cagney * Makefile.in (SIM_OBJS): Add sim-profile.o module. * sim-main.h (WITH_PROFILE): Do not define, defined in common/sim-config.h. Use sim-profile module. (simPROFILE): Delete defintion. * interp.c (PROFILE): Delete definition. (mips_option_handler): Delete 'p', 'y' and 'x' profile options. (sim_close): Delete code writing profile histogram. (mips_set_profile, mips_set_profile_size, writeout16, writeout32): Delete. (sim_engine_run): Delete code profiling the PC. Mon Oct 20 13:31:20 1997 Andrew Cagney * sim-main.h (SIGNEXTEND): Force type of result to unsigned_word. * interp.c (sim_monitor): Make register pointers of type unsigned_word*. * sim-main.h: Make registers of type unsigned_word not signed_word. Thu Oct 16 10:31:39 1997 Andrew Cagney start-sanitize-r5900 * sim-main.h (BYTES_IN_MMI_REGS, ..., SUB_REG_FETCH, ..., GPR_SB, ...): Move to sim-main.h end-sanitize-r5900 * interp.c (sync_operation): Rename from SyncOperation, make global, add SD argument. (prefetch): Rename from Prefetch, make global, add SD argument. (decode_coproc): Make global. * sim-main.h (SyncOperation, DecodeCoproc, Pefetch): Define. * gencode.c (build_instruction): Generate DecodeCoproc not decode_coproc calls. * interp.c (SETFCC, GETFCC, PREVCOC1): Move to sim-main.h (SizeFGR): Move to sim-main.h (simHALTEX, simHALTIN, simTRACE, simPROFILE, simDELAYSLOT, simSIGINT, simJALDELAYSLOT): Move to sim-main.h (FP_FLAGS, FP_ENABLE, FP_CAUSE, IR, UF, OF, DZ, IO, UO): Move to sim-main.h. (FP_FS, FP_MASK_RM, FP_SH_RM, FP_RM_NEAREST, FP_RM_TOPINF, FP_RM_TOMINF, GETRM): Move to sim-main.h. (Uncached, CachedNoncoherent, CachedCoherent, Cached, isINSTRUCTION, ..., AccessLength_BYTE, ...): Move to sim-main.h. (UserMode, BigEndianMem, ByteSwapMem, ReverseEndian, BigEndianCPU, status_KSU_mask, ...). Moved to sim-main.h * sim-main.h (ALU32_END, ALU64_END): Define. When overflow raise exception. (sim-alu.h): Include. (NULLIFY_NIA, NULL_CIA, CPU_CIA): Define. (sim_cia): Typedef to instruction_address. Thu Oct 16 10:31:41 1997 Andrew Cagney * Makefile.in (interp.o): Rename generated file engine.c to oengine.c. * interp.c: Update. Thu Oct 16 10:31:40 1997 Andrew Cagney * gencode.c (build_instruction): Use FPR_STATE not fpr_state. Thu Oct 16 10:31:39 1997 Andrew Cagney * gencode.c (build_instruction): For "FPSQRT", output correct number of arguments to Recip. Tue Oct 14 17:38:18 1997 Andrew Cagney * Makefile.in (interp.o): Depends on sim-main.h * interp.c (mips16_entry, ColdReset,dotrace): Add SD argument. Use GPR not registers. * sim-main.h (sim_cpu): Add registers, register_widths, fpr_state, ipc, dspc, pending_*, hiaccess, loaccess, state, dsstate fields. (REGISTERS, REGISTER_WIDTHS, FPR_STATE, IPC, DSPC, PENDING_*, STATE, DSSTATE): Define (GPR, FGRIDX, ..): Define. * interp.c (registers, register_widths, fpr_state, ipc, dspc, pending_*, hiaccess, loaccess, state, dsstate): Delete globals. (GPR, FGRIDX, ...): Delete macros. * interp.c: Update names to match defines from sim-main.h Tue Oct 14 15:11:45 1997 Andrew Cagney * interp.c (sim_monitor): Add SD argument. (sim_warning): Delete. Replace calls with calls to sim_io_eprintf. (sim_error): Delete. Replace calls with sim_io_error. (open_trace, writeout32, writeout16, getnum): Add SD argument. (mips_set_profile): Rename from sim_set_profile. Add SD argument. (mips_set_profile_size): Rename from sim_set_profile_size. Add SD argument. (mips_size): Rename from sim_size. Add SD argument. * interp.c (simulator): Delete global variable. (callback): Delete global variable. (mips_option_handler, sim_open, sim_write, sim_read, sim_store_register, sim_fetch_register, sim_info, sim_do_command, sim_size,sim_monitor): Use sim_io_* not callback->*. (sim_open): ZALLOC simulator struct. (PROFILE): Do not define. Tue Oct 14 13:35:48 1997 Andrew Cagney * interp.c (sim_open), support.h: Replace CHECKSIM macro found in support.h with corresponding code. * sim-main.h (word64, uword64), support.h: Move definition to sim-main.h. (WORD64LO, WORD64HI, SET64LO, SET64HI, WORD64, UWORD64): Ditto. * support.h: Delete * Makefile.in: Update dependencies * interp.c: Do not include. Tue Oct 14 13:35:48 1997 Andrew Cagney * interp.c (address_translation, load_memory, store_memory, cache_op): Rename to from AddressTranslation et.al., make global, add SD argument * sim-main.h (AddressTranslation, LoadMemory, StoreMemory, CacheOp): Define. * interp.c (SignalException): Rename to signal_exception, make global. * interp.c (Interrupt, ...): Move definitions to sim-main.h. * sim-main.h (SignalException, SignalExceptionInterrupt, SignalExceptionInstructionFetch, SignalExceptionAddressStore, SignalExceptionAddressLoad, SignalExceptionSimulatorFault, SignalExceptionIntegerOverflow, SignalExceptionCoProcessorUnusable): Define. * interp.c, support.h: Use. Tue Oct 14 13:19:20 1997 Andrew Cagney * interp.c (ValueFPR, StoreFPR), sim-main.h: Make global, rename to value_fpr / store_fpr. Add SD argument. (NaN, Infinity, Less, Equal, AbsoluteValue, Negate, Add, Sub, Multiply, Divide, Recip, SquareRoot, Convert): Make global. * sim-main.h (ValueFPR, StoreFPR): Define. Tue Oct 14 13:06:55 1997 Andrew Cagney * interp.c (sim_engine_run): Check consistency between configure WITH_TARGET_WORD_BITSIZE and WITH_FLOATING_POINT and gensim GPRLEN and HASFPU. * configure.in (mips_bitsize): Configure WITH_TARGET_WORD_BITSIZE. (mips_fpu): Configure WITH_FLOATING_POINT. (mips_endian): Configure WITH_TARGET_ENDIAN. * configure: Update. Fri Oct 3 09:28:00 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. start-sanitize-r5900 Mon Aug 25 19:11:15 1997 Andrew Cagney * interp.c (MAX_REG): Allow up-to 128 registers. (LO1, HI1): Define value that matches REGISTER_NAMES in gdb. (REGISTER_SA): Ditto. (sim_open): Initialize register_widths for r5900 specific registers. (sim_fetch_register, sim_store_register): Check for request of r5900 specific SA register. Check for request for hi 64 bits of r5900 specific registers. end-sanitize-r5900 Mon Sep 29 14:45:00 1997 Bob Manson * configure: Regenerated. Fri Sep 26 12:48:18 1997 Mark Alexander * interp.c: Allow Debug, DEPC, and EPC registers to be examined in GDB. Thu Sep 25 11:15:22 1997 Andrew Cagney * gencode.c (print_igen_insn_models): Assume certain architectures include all mips* instructions. (print_igen_insn_format): Use data_size==-1 as marker for MIPS16 instruction. * Makefile.in (tmp.igen): Add target. Generate igen input from gencode file. * gencode.c (FEATURE_IGEN): Define. (main): Add --igen option. Generate output in igen format. (process_instructions): Format output according to igen option. (print_igen_insn_format): New function. (print_igen_insn_models): New function. (process_instructions): Only issue warnings and ignore instructions when no FEATURE_IGEN. Wed Sep 24 17:38:57 1997 Andrew Cagney * interp.c (COP_SD, COP_LD): Add UNUSED to pacify GCC for some MIPS targets. Tue Sep 23 11:04:38 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Sep 23 10:19:51 1997 Andrew Cagney * Makefile.in (SIM_ALIGNMENT, SIM_ENDIAN, SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common. (SIM_EXTRA_CFLAGS): Update. Mon Sep 22 11:46:20 1997 Andrew Cagney * configure.in: Configure non-strict memory alignment. * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Sep 19 17:45:25 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Sat Sep 20 14:07:28 1997 Gavin Koch * gencode.c (SDBBP,DERET): Added (3900) insns. (RFE): Turn on for 3900. * interp.c (DebugBreakPoint,DEPC,Debug,Debug_*): Added. (dsstate): Made global. (SUBTARGET_R3900): Added. (CANCELDELAYSLOT): New. (SignalException): Ignore SystemCall rather than ignore and terminate. Add DebugBreakPoint handling. (decode_coproc): New insns RFE, DERET; and new registers Debug and DEPC protected by SUBTARGET_R3900. (sim_engine_run): Use CANCELDELAYSLOT rather than clearing bits explicitly. * Makefile.in,configure.in: Add mips subtarget option. * configure: Update. Fri Sep 19 09:33:27 1997 Gavin Koch * gencode.c: Add r3900 (tx39). start-sanitize-tx19 * gencode.c: Fix some configuration problems by improving the relationship between tx19 and tx39. end-sanitize-tx19 Tue Sep 16 15:52:04 1997 Gavin Koch * gencode.c (build_instruction): Don't need to subtract 4 for JALR, just 2. Tue Sep 16 11:32:28 1997 Gavin Koch * interp.c: Correct some HASFPU problems. Mon Sep 15 17:36:15 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Sep 12 12:01:39 1997 Andrew Cagney * interp.c (mips_options): Fix samples option short form, should be `x'. Thu Sep 11 09:35:29 1997 Andrew Cagney * interp.c (sim_info): Enable info code. Was just returning. Tue Sep 9 17:30:57 1997 Andrew Cagney * interp.c (decode_coproc): Clarify warning about unsuported MTC0, MFC0. Tue Sep 9 16:28:28 1997 Andrew Cagney * gencode.c (build_instruction): Use SIGNED64 for 64 bit constants. (build_instruction): Ditto for LL. start-sanitize-tx19 Sun Sep 7 16:05:46 1997 Gavin Koch * mips/configure.in, mips/gencode: Add tx19/r1900. end-sanitize-tx19 Thu Sep 4 17:21:23 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. start-sanitize-r5900 Mon Sep 1 18:43:30 1997 Andrew Cagney * gencode.c (build_instruction): For "pabsw" and "pabsh", check for overflow due to ABS of MININT, set result to MAXINT. (build_instruction): For "psrlvw", signextend bit 31. end-sanitize-r5900 Wed Aug 27 18:13:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Wed Aug 27 14:12:27 1997 Andrew Cagney * interp.c (sim_open): Add call to sim_analyze_program, update call to sim_config. Tue Aug 26 10:40:07 1997 Andrew Cagney * interp.c (sim_kill): Delete. (sim_create_inferior): Add ABFD argument. Set PC from same. (sim_load): Move code initializing trap handlers from here. (sim_open): To here. (sim_load): Delete, use sim-hload.c. * Makefile.in (SIM_OBJS): Add sim-hload.o module. Mon Aug 25 17:50:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Mon Aug 25 15:59:48 1997 Andrew Cagney * interp.c (sim_open): Add ABFD argument. (sim_load): Move call to sim_config from here. (sim_open): To here. Check return status. start-sanitize-r5900 * gencode.c (build_instruction): Do not define x8000000000000000, x7FFFFFFFFFFFFFFF, or xFFFFFFFF80000000. end-sanitize-r5900 start-sanitize-r5900 Mon Jul 28 19:49:29 1997 Andrew Cagney * gencode.c (build_instruction): For "pdivw", "pdivbw" and "pdivuw" check for overflow due to signed divide by -1. end-sanitize-r5900 Fri Jul 25 15:00:45 1997 Gavin Koch * gencode.c (build_instruction): Two arg MADD should not assign result to $0. start-sanitize-r5900 Thu Jul 10 11:58:48 1997 Andrew Cagney * gencode.c (build_instruction): For "ppac5" use unsigned arrithmetic so that the sign bit doesn't smear when right shifted. (build_instruction): For "pdiv" perform sign extension when storing results in HI and LO. (build_instructions): For "pdiv" and "pdivbw" check for divide-by-zero. (build_instruction): For "pmfhl.slw" update hi part of dest register as well as low part. (build_instruction): For "pmfhl" portably handle long long values. (build_instruction): For "pmfhl.sh" correctly negative values. Store half words 2 and three in the correct place. (build_instruction): For "psllvw", sign extend value after shift. end-sanitize-r5900 Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com) * sim/mips/configure: Change default_sim_endian to 0 (bi-endian) * sim/mips/configure.in: Regenerate. Wed Jul 9 10:29:21 1997 Andrew Cagney * interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit signed8, unsigned8 et.al. types. start-sanitize-r5900 * gencode.c (build_instruction): For PMULTU* do not sign extend registers. Make generated code easier to debug. end-sanitize-r5900 * interp.c (SUB_REG_FETCH): Handle both little and big endian hosts when selecting subreg. start-sanitize-r5900 Tue Jul 8 18:07:20 1997 Andrew Cagney * gencode.c (type_for_data_len): For 32bit operations concerned with overflow, perform op using 64bits. (build_instruction): For PADD, always compute operation using type returned by type_for_data_len. (build_instruction): For PSUBU, when overflow, saturate to zero as actually underflow. end-sanitize-r5900 Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com) start-sanitize-r5900 * gencode.c (build_instruction): Handle "pext5" according to version 1.95 of the r5900 ISA. * gencode.c (build_instruction): Handle "ppac5" according to version 1.95 of the r5900 ISA. end-sanitize-r5900 * interp.c (sim_engine_run): Reset the ZERO register to zero regardless of FEATURE_WARN_ZERO. * gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO. Wed Jun 4 10:43:14 1997 Andrew Cagney * interp.c (decode_coproc): Implement MTC0 N, CAUSE. (SignalException): For BreakPoints ignore any mode bits and just save the PC. (SignalException): Always set the CAUSE register. Tue Jun 3 05:00:33 1997 Andrew Cagney * interp.c (SignalException): Clear the simDELAYSLOT flag when an exception has been taken. * interp.c: Implement the ERET and mt/f sr instructions. start-sanitize-r5900 Mon Jun 2 23:28:19 1997 Andrew Cagney * gencode.c (build_instruction): For paddu, extract unsigned sub-fields. * gencode.c (build_instruction): Saturate padds instead of padd instructions. end-sanitize-r5900 Sat May 31 00:44:16 1997 Andrew Cagney * interp.c (SignalException): Don't bother restarting an interrupt. Fri May 30 23:41:48 1997 Andrew Cagney * interp.c (SignalException): Really take an interrupt. (interrupt_event): Only deliver interrupts when enabled. Tue May 27 20:08:06 1997 Andrew Cagney * interp.c (sim_info): Only print info when verbose. (sim_info) Use sim_io_printf for output. Tue May 27 14:22:23 1997 Andrew Cagney * interp.c (CoProcPresent): Add UNUSED attribute - not used by all mips architectures. Tue May 27 14:22:23 1997 Andrew Cagney * interp.c (sim_do_command): Check for common commands if a simulator specific command fails. Thu May 22 09:32:03 1997 Gavin Koch * interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP and simBE when DEBUG is defined. Wed May 21 09:08:10 1997 Andrew Cagney * interp.c (interrupt_event): New function. Pass exception event onto exception handler. * configure.in: Check for stdlib.h. * configure: Regenerate. * gencode.c (build_instruction): Add UNUSED attribute to tempS variable declaration. (build_instruction): Initialize memval1. (build_instruction): Add UNUSED attribute to byte, bigend, reverse. (build_operands): Ditto. * interp.c: Fix GCC warnings. (sim_get_quit_code): Delete. * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS. * Makefile.in: Ditto. * configure: Re-generate. * Makefile.in (SIM_OBJS): Add sim-watch.o module. Tue May 20 15:08:56 1997 Andrew Cagney * interp.c (mips_option_handler): New function parse argumes using sim-options. (myname): Replace with STATE_MY_NAME. (sim_open): Delete check for host endianness - performed by sim_config. (simHOSTBE, simBE): Delete, replaced by sim-endian flags. (sim_open): Move much of the initialization from here. (sim_load): To here. After the image has been loaded and endianness set. (sim_open): Move ColdReset from here. (sim_create_inferior): To here. (sim_open): Make FP check less dependant on host endianness. * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or run. * interp.c (sim_set_callbacks): Delete. * interp.c (membank, membank_base, membank_size): Replace with STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE. (sim_open): Remove call to callback->init. gdb/run do this. * interp.c: Update * sim-main.h (SIM_HAVE_FLATMEM): Define. * interp.c (big_endian_p): Delete, replaced by current_target_byte_order. Tue May 20 13:55:00 1997 Andrew Cagney * interp.c (host_read_long, host_read_word, host_swap_word, host_swap_long): Delete. Using common sim-endian. (sim_fetch_register, sim_store_register): Use H2T. (pipeline_ticks): Delete. Handled by sim-events. (sim_info): Update. (sim_engine_run): Update. Tue May 20 13:42:03 1997 Andrew Cagney * interp.c (sim_stop_reason): Move code determining simEXCEPTION reason from here. (SignalException): To here. Signal using sim_engine_halt. (sim_stop_reason): Delete, moved to common. Tue May 20 10:19:48 1997 Andrew Cagney * interp.c (sim_open): Add callback argument. (sim_set_callbacks): Delete SIM_DESC argument. (sim_size): Ditto. Mon May 19 18:20:38 1997 Andrew Cagney * Makefile.in (SIM_OBJS): Add common modules. * interp.c (sim_set_callbacks): Also set SD callback. (set_endianness, xfer_*, swap_*): Delete. (host_read_word, host_read_long, host_swap_word, host_swap_long): Change to functions using sim-endian macros. (control_c, sim_stop): Delete, use common version. (simulate): Convert into. (sim_engine_run): This function. (sim_resume): Delete. * interp.c (simulation): New variable - the simulator object. (sim_kind): Delete global - merged into simulation. (sim_load): Cleanup. Move PC assignment from here. (sim_create_inferior): To here. * sim-main.h: New file. * interp.c (sim-main.h): Include. Thu Apr 24 00:39:51 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 23 17:32:19 1997 Doug Evans * tconfig.in (SIM_HAVE_BIENDIAN): Define. Mon Apr 21 17:16:13 1997 Gavin Koch * gencode.c (build_instruction): DIV instructions: check for division by zero and integer overflow before using host's division operation. Thu Apr 17 03:18:14 1997 Doug Evans * Makefile.in (SIM_OBJS): Add sim-load.o. * interp.c: #include bfd.h. (target_byte_order): Delete. (sim_kind, myname, big_endian_p): New static locals. (sim_open): Set sim_kind, myname. Move call to set_endianness to after argument parsing. Recognize -E arg, set endianness accordingly. (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to load file into simulator. Set PC from bfd. (sim_create_inferior): Return SIM_RC. Delete arg start_address. (set_endianness): Use big_endian_p instead of target_byte_order. Wed Apr 16 17:55:37 1997 Andrew Cagney * interp.c (sim_size): Delete prototype - conflicts with definition in remote-sim.h. Correct definition. Mon Apr 7 15:45:02 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Wed Apr 2 15:06:28 1997 Doug Evans * interp.c (sim_open): New arg `kind'. * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 2 14:34:19 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Mar 25 11:38:22 1997 Doug Evans * interp.c (sim_open): Set optind to 0 before calling getopt. Wed Mar 19 01:14:00 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Mar 17 10:52:59 1997 Gavin Koch * interp.c : Replace uses of pr_addr with pr_uword64 where the bit length is always 64 independent of SIM_ADDR. (pr_uword64) : added. Mon Mar 17 15:10:07 1997 Andrew Cagney * configure: Re-generate. Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. Thu Mar 13 12:51:36 1997 Doug Evans * interp.c (sim_open): New SIM_DESC result. Argument is now in argv form. (other sim_*): New SIM_DESC argument. start-sanitize-r5900 Wed Feb 26 18:32:21 1997 Gavin Koch * gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR): Change values to avoid overloading DOUBLEWORD which is tested for all insns. * gencode.c: reinstate "offending code". end-sanitize-r5900 Mon Feb 24 22:47:14 1997 Dawn Perchik * interp.c: Fix printing of addresses for non-64-bit targets. (pr_addr): Add function to print address based on size. start-sanitize-r5900 * gencode.c: #ifdef out offending code until a permanent fix can be added. Code is causing build errors for non-5900 mips targets. end-sanitize-r5900 start-sanitize-r5900 Thu Feb 20 10:40:24 1997 Gavin Koch * gencode.c (process_instructions): Correct test for ISA dependent architecture bits in isa field of MIPS_DECODE. end-sanitize-r5900 Wed Feb 19 14:42:09 1997 Mark Alexander * interp.c (simopen): Add support for LSI MiniRISC PMON vectors. start-sanitize-r5900 Tue Feb 18 17:03:47 1997 Gavin Koch * gencode.c (MIPS_DECODE): Correct instruction feature flags for PMADDUW. end-sanitize-r5900 Thu Feb 13 14:08:30 1997 Ian Lance Taylor * gencode.c (build_mips16_operands): Correct computation of base address for extended PC relative instruction. start-sanitize-r5900 Fri Feb 7 11:12:44 1997 Gavin Koch * Makefile.in, configure, configure.in, gencode.c, interp.c, support.h: add r5900. end-sanitize-r5900 Thu Feb 6 17:16:15 1997 Ian Lance Taylor * interp.c (mips16_entry): Add support for floating point cases. (SignalException): Pass floating point cases to mips16_entry. (ValueFPR): Don't restrict fmt_single and fmt_word to even registers. (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single or fmt_word. (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR, and then set the state to fmt_uninterpreted. (COP_SW): Temporarily set the state to fmt_word while calling ValueFPR. Tue Feb 4 16:48:25 1997 Ian Lance Taylor * gencode.c (build_instruction): The high order may be set in the comparison flags at any ISA level, not just ISA 4. Tue Feb 4 13:33:30 1997 Doug Evans * Makefile.in (@COMMON_MAKEFILE_FRAG): Use COMMON_{PRE,POST}_CONFIG_FRAG instead. * configure.in: sinclude ../common/aclocal.m4. * configure: Regenerated. Fri Jan 31 11:11:45 1997 Ian Lance Taylor * configure: Rebuild after change to aclocal.m4. Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) * configure configure.in Makefile.in: Update to new configure scheme which is more compatible with WinGDB builds. * configure.in: Improve comment on how to run autoconf. * configure: Re-run autoconf to get new ../common/aclocal.m4. * Makefile.in: Use autoconf substitution to install common makefile fragment. Wed Jan 8 12:39:03 1997 Jim Wilson * gencode.c (build_instruction): Use BigEndianCPU instead of ByteSwapMem. Thu Jan 02 22:23:04 1997 Mark Alexander * interp.c (sim_monitor): Make output to stdout visible in wingdb's I/O log window. Tue Dec 31 07:04:00 1996 Mark Alexander * support.h: Undo previous change to SIGTRAP and SIGQUIT values. Mon Dec 30 17:36:06 1996 Ian Lance Taylor * interp.c (store_word, load_word): New static functions. (mips16_entry): New static function. (SignalException): Look for mips16 entry and exit instructions. (simulate): Use the correct index when setting fpr_state after doing a pending move. Sun Dec 29 09:37:18 1996 Mark Alexander * interp.c: Fix byte-swapping code throughout to work on both little- and big-endian hosts. Sun Dec 29 09:18:32 1996 Mark Alexander * support.h: Make definitions of SIGTRAP and SIGQUIT consistent with gdb/config/i386/xm-windows.h. Fri Dec 27 22:48:51 1996 Mark Alexander * gencode.c (build_instruction): Work around MSVC++ code gen bug that messes up arithmetic shifts. Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com) * support.h: Use _WIN32 instead of __WIN32__. Also add defs for SIGTRAP and SIGQUIT for _WIN32. Thu Dec 19 14:07:27 1996 Ian Lance Taylor * gencode.c (build_instruction) [MUL]: Cast operands to word64, to force a 64 bit multiplication. (build_instruction) [OR]: In mips16 mode, don't do anything if the destination register is 0, since that is the default mips16 nop instruction. Mon Dec 16 14:59:38 1996 Ian Lance Taylor * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI. (build_endian_shift): Don't check proc64. (build_instruction): Always set memval to uword64. Cast op2 to uword64 when shifting it left in memory instructions. Always use the same code for stores--don't special case proc64. * gencode.c (build_mips16_operands): Fix base PC value for PC relative operands. (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a jal instruction. * interp.c (simJALDELAYSLOT): Define. (JALDELAYSLOT): Define. (INDELAYSLOT, INJALDELAYSLOT): Define. (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared. Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com) * interp.c (sim_open): add flush_cache as a PMON routine (sim_monitor): handle flush_cache by ignoring it Wed Dec 11 13:53:51 1996 Jim Wilson * gencode.c (build_instruction): Use !ByteSwapMem instead of BigEndianMem. * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete. (BigEndianMem): Rename to ByteSwapMem and change sense. (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change BigEndianMem references to !ByteSwapMem. (set_endianness): New function, with prototype. (sim_open): Call set_endianness. (sim_info): Use simBE instead of BigEndianMem. (xfer_direct_word, xfer_direct_long, swap_direct_word, swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word, xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER ifdefs, keeping the prototype declaration. (swap_word): Rewrite correctly. (ColdReset): Delete references to CONFIG. Delete endianness related code; moved to set_endianness. Tue Dec 10 11:32:04 1996 Jim Wilson * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits. * interp.c (CHECKHILO): Define away. (simSIGINT): New macro. (membank_size): Increase from 1MB to 2MB. (control_c): New function. (sim_resume): Rename parameter signal to signal_number. Add local variable prev. Call signal before and after simulate. (sim_stop_reason): Add simSIGINT support. (sim_warning, sim_error, dotrace, SignalException): Define as stdarg functions always. (sim_warning): Delete call to SignalException. Do call printf_filtered if logfh is NULL. (AddressTranslation): Add #ifdef DEBUG around debugging message and a call to sim_warning. Wed Nov 27 11:53:50 1996 Ian Lance Taylor * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD 16 bit instructions. Tue Nov 26 11:53:12 1996 Ian Lance Taylor Add support for mips16 (16 bit MIPS implementation): * gencode.c (inst_type): Add mips16 instruction encoding types. (GETDATASIZEINSN): Define. (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and mtlo. (MIPS16_DECODE): New table, for mips16 instructions. (bitmap_val): New static function. (struct mips16_op): Define. (mips16_op_table): New table, for mips16 operands. (build_mips16_operands): New static function. (process_instructions): If PC is odd, decode a mips16 instruction. Break out instruction handling into new build_instruction function. (build_instruction): New static function, broken out of process_instructions. Check modifiers rather than flags for SHIFT bit count and m[ft]{hi,lo} direction. (usage): Pass program name to fprintf. (main): Remove unused variable this_option_optind. Change ``*loptarg++'' to ``loptarg++''. (my_strtoul): Parenthesize && within ||. * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd. (simulate): If PC is odd, fetch a 16 bit instruction, and increment PC by 2 rather than 4. * configure.in: Add case for mips16*-*-*. * configure: Rebuild. Fri Nov 22 08:49:36 1996 Mark Alexander * interp.c: Allow -t to enable tracing in standalone simulator. Fix garbage output in trace file and error messages. Wed Nov 20 01:54:37 1996 Doug Evans * Makefile.in: Delete stuff moved to ../common/Make-common.in. (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define. * configure.in: Simplify using macros in ../common/aclocal.m4. * configure: Regenerated. * tconfig.in: New file. Tue Nov 12 13:34:00 1996 Dawn Perchik * interp.c: Fix bugs in 64-bit port. Use ansi function declarations for msvc compiler. Initialize and test file pointer in trace code. Prevent duplicate definition of LAST_EMED_REGNUM. Tue Oct 15 11:07:06 1996 Mark Alexander * interp.c (xfer_big_long): Prevent unwanted sign extension. Thu Sep 26 17:35:00 1996 James G. Smith * interp.c (SignalException): Check for explicit terminating breakpoint value. * gencode.c: Pass instruction value through SignalException() calls for Trap, Breakpoint and Syscall. Thu Sep 26 11:35:17 1996 James G. Smith * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is only used on those hosts that provide it. * configure.in: Add sqrt() to list of functions to be checked for. * config.in: Re-generated. * configure: Re-generated. Fri Sep 20 15:47:12 1996 Ian Lance Taylor * gencode.c (process_instructions): Call build_endian_shift when expanding STORE RIGHT, to fix swr. * support.h (SIGNEXTEND): If the sign bit is not set, explicitly clear the high bits. * interp.c (Convert): Fix fmt_single to fmt_long to not truncate. Fix float to int conversions to produce signed values. Thu Sep 19 15:34:17 1996 Ian Lance Taylor * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction. (process_instructions): Correct handling of nor instruction. Correct shift count for 32 bit shift instructions. Correct sign extension for arithmetic shifts to not shift the number of bits in the type. Fix 64 bit multiply high word calculation. Fix 32 bit unsigned multiply. Fix ldxc1 and friends to use coprocessor 1. Fix madd. * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC. It's OK to have a mult follow a mult. What's not OK is to have a mult follow an mfhi. (Convert): Comment out incorrect rounding code. Mon Sep 16 11:38:16 1996 James G. Smith * interp.c (sim_monitor): Improved monitor printf simulation. Tidied up simulator warnings, and added "--log" option for directing warning message output. * gencode.c: Use sim_warning() rather than WARNING macro. Thu Aug 22 15:03:12 1996 Ian Lance Taylor * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and getopt1.o, rather than on gencode.c. Link objects together. Don't link against -liberty. (gencode.o, getopt.o, getopt1.o): New targets. * gencode.c: Include and "ansidecl.h". (AND): Undefine after including "ansidecl.h". (ULONG_MAX): Define if not defined. (OP_*): Don't define macros; now defined in opcode/mips.h. (main): Call my_strtoul rather than strtoul. (my_strtoul): New static function. Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com) * gencode.c (process_instructions): Generate word64 and uword64 instead of `long long' and `unsigned long long' data types. * interp.c: #include sysdep.h to get signals, and define default for SIGBUS. * (Convert): Work around for Visual-C++ compiler bug with type conversion. * support.h: Make things compile under Visual-C++ by using __int64 instead of `long long'. Change many refs to long long into word64/uword64 typedefs. Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. (docdir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. (AC_PROG_INSTALL): Added. (AC_PROG_CC): Moved to before configure.host call. * configure: Rebuilt. Wed Jun 5 08:28:13 1996 James G. Smith * configure.in: Define @SIMCONF@ depending on mips target. * configure: Rebuild. * Makefile.in (run): Add @SIMCONF@ to control simulator construction. * gencode.c: Change LOADDRMASK to 64bit memory model only. * interp.c: Remove some debugging, provide more detailed error messages, update memory accesses to use LOADDRMASK. Mon Jun 3 11:55:03 1996 Ian Lance Taylor * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS, AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set stamp-h. * configure: Rebuild. * config.in: New file, generated by autoheader. * interp.c: Include "config.h". Include , , and if they exist. Replace #ifdef sun with #ifdef HAVE_ANINT and HAVE_AINT, as appropriate. * Makefile.in (run): Use @LIBS@ rather than -lm. (interp.o): Depend upon config.h. (Makefile): Just rebuild Makefile. (clean): Remove stamp-h. (mostlyclean): Make the same as clean, not as distclean. (config.h, stamp-h): New targets. Fri May 10 00:41:17 1996 James G. Smith * interp.c (ColdReset): Fix boolean test. Make all simulator globals static. Wed May 8 15:12:58 1996 James G. Smith * interp.c (xfer_direct_word, xfer_direct_long, swap_direct_word, swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word, xfer_little_long, swap_word,swap_long): Added. * interp.c (ColdReset): Provide function indirection to host<->simulated_target transfer routines. * interp.c (sim_store_register, sim_fetch_register): Updated to make use of indirected transfer routines. Fri Apr 19 15:48:24 1996 James G. Smith * gencode.c (process_instructions): Ensure FP ABS instruction recognised. * interp.c (AbsoluteValue): Add routine. Also provide simple PMON system call support. Wed Apr 10 09:51:38 1996 James G. Smith * interp.c (sim_do_command): Complain if callback structure not initialised. Thu Mar 28 13:50:51 1996 James G. Smith * interp.c (Convert): Provide round-to-nearest and round-to-zero support for Sun hosts. * Makefile.in (gencode): Ensure the host compiler and libraries used for cross-hosted build. Wed Mar 27 14:42:12 1996 James G. Smith * interp.c, gencode.c: Some more (TODO) tidying. Thu Mar 7 11:19:33 1996 James G. Smith * gencode.c, interp.c: Replaced explicit long long references with WORD64HI, WORD64LO, SET64HI and SET64LO macro calls. * support.h (SET64LO, SET64HI): Macros added. Wed Feb 21 12:16:21 1996 Ian Lance Taylor * configure: Regenerate with autoconf 2.7. Tue Jan 30 08:48:18 1996 Fred Fish * interp.c (LoadMemory): Enclose text following #endif in /* */. * support.h: Remove superfluous "1" from #if. * support.h (CHECKSIM): Remove stray 'a' at end of line. Mon Dec 4 11:44:40 1995 Jamie Smith * interp.c (StoreFPR): Control UndefinedResult() call on WARN_RESULT manifest. Fri Dec 1 16:37:19 1995 James G. Smith * gencode.c: Tidied instruction decoding, and added FP instruction support. * interp.c: Added dineroIII, and BSD profiling support. Also run-time FP handling. Sun Oct 22 00:57:18 1995 James G. Smith * Changelog, Makefile.in, README.Cygnus, configure, configure.in, gencode.c, interp.c, support.h: created.