#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-sim-cflags=opts Extra CFLAGS for use in building simulator" ac_help="$ac_help --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o" ac_help="$ac_help --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code" ac_help="$ac_help --enable-sim-config=file Override default config file" ac_help="$ac_help --enable-sim-opcode=which Override default opcode lookup." ac_help="$ac_help --enable-sim-switch Use a switch instead of a table for instruction call." ac_help="$ac_help --enable-sim-duplicate Expand (duplicate) semantic functions." ac_help="$ac_help --enable-sim-jump Jump between semantic code (instead of call/return)." ac_help="$ac_help --enable-sim-filter=rule Specify filter rules." ac_help="$ac_help --enable-sim-icache=size Specify instruction cache size." ac_help="$ac_help --enable-sim-inline=inlines Specify which functions should be inlined." ac_help="$ac_help --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums." ac_help="$ac_help --enable-sim-endian=endian Specify target byte endian orientation." ac_help="$ac_help --enable-sim-hostendain=end Specify host byte endian orientation." ac_help="$ac_help --enable-sim-smp=n Specify number of processors to configure for." ac_help="$ac_help --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)." ac_help="$ac_help --enable-sim-bitsize=n Specify target bitsize (32 or 64)." ac_help="$ac_help --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64)." ac_help="$ac_help --enable-sim-env=env Specify target environment (operating, virtual, user)." ac_help="$ac_help --enable-sim-timebase Specify whether the PPC timebase is supported." ac_help="$ac_help --enable-sim-alignment=align Specify strict or nonstrict alignment." ac_help="$ac_help --enable-sim-trace Specify whether tracing is supported." ac_help="$ac_help --enable-sim-assert Specify whether to perform random assertions." ac_help="$ac_help --enable-sim-reserved-bits Specify whether to check reserved bits in instruction." ac_help="$ac_help --enable-sim-float Specify whether to use host floating point or simulate." ac_help="$ac_help --enable-sim-monitor=mon Specify whether to enable monitoring events." ac_help="$ac_help --enable-sim-model=which Specify PowerPC to model." ac_help="$ac_help --enable-sim-default-model=which Specify default PowerPC to model." ac_help="$ac_help --enable-sim-model-issue Specify whether to simulate model specific actions" ac_help="$ac_help --enable-sim-stdio Specify whether to use stdio for console input/output." # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=Makefile.in # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. for ac_prog in ginstall installbsd scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. # OSF/1 installbsd also uses dspmsg, but is usable. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ac_prog_rejected=no for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes if test "${CFLAGS+set}" != set; then echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_gcc_g=yes else ac_cv_prog_gcc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 if test $ac_cv_prog_gcc_g = yes; then CFLAGS="-g -O" else CFLAGS="-O" fi fi else GCC= test "${CFLAGS+set}" = set || CFLAGS="-g" fi # Put a plausible default for CC_FOR_BUILD in Makefile. # If we cannot run a trivial program, we must be cross compiling. echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_c_cross=yes else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } if test -s conftest && (./conftest; exit) 2>/dev/null; then ac_cv_c_cross=no else ac_cv_c_cross=yes fi fi rm -fr conftest* fi echo "$ac_t""$ac_cv_c_cross" 1>&6 cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' else CC_FOR_BUILD=gcc fi # Check whether --enable-sim-cflags or --disable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then enableval="$enable_sim_cflags" case "${enableval}" in yes) sim_cflags="-O2 -fomit-frame-pointer";; no) sim_cflags="";; *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then echo "Setting sim cflags = $sim_cflags" 6>&1 fi else sim_cflags="" fi # Check whether --enable-sim-warnings or --disable-sim-warnings was given. if test "${enable_sim_warnings+set}" = set; then enableval="$enable_sim_warnings" case "${enableval}" in yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";; no) sim_warnings="-w";; *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then echo "Setting warning flags = $sim_warnings" 6>&1 fi else sim_warnings="" fi # Check whether --enable-sim-line-nr or --disable-sim-line-nr was given. if test "${enable_sim_line_nr+set}" = set; then enableval="$enable_sim_line_nr" case "${enableval}" in yes) sim_line_nr="";; no) sim_line_nr="-L";; *) { echo "configure: error: "--enable-sim-line-nr does not take a value"" 1>&2; exit 1; }; sim_line_nr="";; esac if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then echo "Setting warning flags = $sim_line_nr" 6>&1 fi else sim_line-nr="" fi # Check whether --enable-sim-config or --disable-sim-config was given. if test "${enable_sim_config+set}" = set; then enableval="$enable_sim_config" case "${enableval}" in yes|no) { echo "configure: error: "No value supplied for --enable-sim-config=file"" 1>&2; exit 1; };; *) if test -f "${srcdir}/${enableval}"; then sim_config="${enableval}"; elif test -f "${srcdir}/${enableval}-config.h"; then sim_config="${enableval}-config.h" else { echo "configure: error: "Config file $enableval was not found"" 1>&2; exit 1; }; sim_config=std-config.h fi;; esac if test x"$silent" != x"yes" && test x"$sim_config" != x""; then echo "Setting config flags = $sim_config" 6>&1 fi else sim_config="std-config.h" if test x"$silent" != x"yes"; then echo "Setting config flags = $sim_config" 6>&1 fi fi # Check whether --enable-sim-opcode or --disable-sim-opcode was given. if test "${enable_sim_opcode+set}" = set; then enableval="$enable_sim_opcode" case "${enableval}" in yes|no) { echo "configure: error: "No value supplied for --enable-sim-opcode=file"" 1>&2; exit 1; };; *) if test -f "${srcdir}/${enableval}"; then sim_opcode="${enableval}" elif test -f "${srcdir}/ppc-opcode-${enableval}"; then sim_opcode="ppc-opcode-${enableval}" else { echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; }; sim_opcode="ppc-opcode-complex" fi;; esac if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then echo "Setting opcode flags = $sim_opcode" 6>&1 fi else sim_opcode="ppc-opcode-complex" if test x"$silent" != x"yes"; then echo "Setting opcode flags = $sim_opcode" fi fi # Check whether --enable-sim-switch or --disable-sim-switch was given. if test "${enable_sim_switch+set}" = set; then enableval="$enable_sim_switch" case "${enableval}" in yes) sim_switch="-s";; no) sim_switch="";; *) { echo "configure: error: "--enable-sim-switch does not take a value"" 1>&2; exit 1; }; sim_switch="";; esac if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then echo "Setting switch flags = $sim_switch" 6>&1 fi else sim_switch=""; if test x"$silent" != x"yes"; then echo "Setting switch flags = $sim_switch" 6>&1 fi fi # Check whether --enable-sim-duplicate or --disable-sim-duplicate was given. if test "${enable_sim_duplicate+set}" = set; then enableval="$enable_sim_duplicate" case "${enableval}" in yes) sim_dup="-E";; no) sim_dup="";; *) { echo "configure: error: "--enable-sim-duplicate does not take a value"" 1>&2; exit 1; }; sim_dup="";; esac if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then echo "Setting duplicate flags = $sim_dup" 6>&1 fi else sim_dup="-E" if test x"$silent" != x"yes"; then echo "Setting duplicate flags = $sim_dup" 6>&1 fi fi # Check whether --enable-sim-jump or --disable-sim-jump was given. if test "${enable_sim_jump+set}" = set; then enableval="$enable_sim_jump" case "${enableval}" in yes) sim_jump="-J";; no) sim_jump="";; *) { echo "configure: error: "--enable-sim-jump does not take a value"" 1>&2; exit 1; }; sim_jump="";; esac if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then echo "Setting jump flag = $sim_jump" 6>&1 fi else sim_jump="-E" if test x"$silent" != x"yes"; then echo "Setting jump flag = $sim_jump" 6>&1 fi fi # Check whether --enable-sim-filter or --disable-sim-filter was given. if test "${enable_sim_filter+set}" = set; then enableval="$enable_sim_filter" case "${enableval}" in yes) { echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no"" 1>&2; exit 1; }; sim_filter="";; no) sim_filter="";; *) sim_filter="-F $enableval";; esac if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then echo "Setting filter flags = $sim_filter" 6>&1 fi else sim_filter="-F 32,f" if test x"$silent" != x"yes"; then echo "Setting filter flags = $sim_filter" 6>&1 fi fi # Check whether --enable-sim-icache or --disable-sim-icache was given. if test "${enable_sim_icache+set}" = set; then enableval="$enable_sim_icache" icache="" case "${enableval}" in yes) icache="1024"; sim_icache="-I $icache";; no) sim_icache="";; *) icache=1024 sim_icache="-" for x in `echo "${enableval}" | sed -e "s/,/ /g"`; do case "$x" in define) sim_icache="${sim_icache}R";; semantic) sim_icache="${sim_icache}C";; 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) icache=$x;; *) { echo "configure: error: "Unknown value $x for --enable-sim-icache"" 1>&2; exit 1; }; sim_icache="";; esac done sim_icache="${sim_icache}I $icache";; esac if test x"$silent" != x"yes" && test x"$icache" != x""; then echo "Setting instruction cache size to $icache ($sim_icache)" fi else sim_icache="-CI 1024" if test x"$silent" != x"yes"; then echo "Setting instruction cache size to 1024 ($sim_icache)" fi fi # Check whether --enable-sim-inline or --disable-sim-inline was given. if test "${enable_sim_inline+set}" = set; then enableval="$enable_sim_inline" sim_inline="" case "$enableval" in no) sim_inline="-DDEFAULT_INLINE=0";; 0) sim_inline="-DDEFAULT_INLINE=0";; yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";; 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";; *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do new_flag="" case "$x" in *_INLINE=*) new_flag="-D$x";; *_INLINE) new_flag="-D$x=ALL_INLINE";; *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;; *) new_flag="-D$x""_INLINE=ALL_INLINE";; esac if test x"$sim_inline" = x""; then sim_inline="$new_flag" else sim_inline="$sim_inline $new_flag" fi done;; esac if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then echo "Setting inline flags = $sim_inline" 6>&1 fi else if test x"$GCC" != ""; then sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS" if test x"$silent" != x"yes"; then echo "Setting inline flags = $sim_inline" 6>&1 fi else sim_inline="" fi fi # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in yes) sim_bswap="-DWITH_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then echo "Setting bswap flags = $sim_bswap" 6>&1 fi else sim_bswap="" fi # Check whether --enable-sim-endian or --disable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then enableval="$enable_sim_endian" case "${enableval}" in yes) case "$target" in *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; esac;; no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; *) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";; esac if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then echo "Setting endian flags = $sim_endian" 6>&1 fi else sim_endian="" fi # Check whether --enable-sim-hostendian or --disable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then enableval="$enable_sim_hostendian" case "${enableval}" in no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; *) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then echo "Setting hostendian flags = $sim_hostendian" 6>&1 fi else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include int main() { return 0; } int t() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } EOF if { (eval echo configure:1114: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include int main() { return 0; } int t() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } EOF if { (eval echo configure:1130: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else rm -rf conftest* ac_cv_c_bigendian=no fi rm -f conftest* fi rm -f conftest* if test $ac_cv_c_bigendian = unknown; then if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } if test -s conftest && (./conftest; exit) 2>/dev/null; then ac_cv_c_bigendian=no else ac_cv_c_bigendian=yes fi fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_c_bigendian" 1>&6 if test $ac_cv_c_bigendian = yes; then cat >> confdefs.h <<\EOF #define WORDS_BIGENDIAN 1 EOF fi if test $ac_cv_c_bigendian = yes; then sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" else sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" fi else sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" fi fi # Check whether --enable-sim-smp or --disable-sim-smp was given. if test "${enable_sim_smp+set}" = set; then enableval="$enable_sim_smp" case "${enableval}" in yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";; no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";; *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";; esac if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then echo "Setting smp flags = $sim_smp" 6>&1 fi else sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5" if test x"$silent" != x"yes"; then echo "Setting smp flags = $sim_smp" 6>&1 fi fi # Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given. if test "${enable_sim_xor_endian+set}" = set; then enableval="$enable_sim_xor_endian" case "${enableval}" in yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";; no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";; *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";; esac if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then echo "Setting xor-endian flag = $sim_xor_endian" 6>&1 fi else sim_xor_endian="" fi # Check whether --enable-sim-bitsize or --disable-sim-bitsize was given. if test "${enable_sim_bitsize+set}" = set; then enableval="$enable_sim_bitsize" case "${enableval}" in 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";; *) { echo "configure: error: "--enable-sim-bitsize was given $enableval" 1>&2; exit 1; }; sim_bitsize="";; esac if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then echo "Setting bitsize flags = $sim_bitsize" 6>&1 fi else sim_bitsize="" fi # Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given. if test "${enable_sim_hostbitsize+set}" = set; then enableval="$enable_sim_hostbitsize" case "${enableval}" in 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";; *) { echo "configure: error: "--enable-sim-hostbitsize was given $enableval" 1>&2; exit 1; }; sim_hostbitsize="";; esac if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1 fi else sim_hostbitsize="" fi # Check whether --enable-sim-env or --disable-sim-env was given. if test "${enable_sim_env+set}" = set; then enableval="$enable_sim_env" case "${enableval}" in operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";; virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";; user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";; no) sim_env="-DWITH_ENVIRONMENT=0";; *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-env"" 1>&2; exit 1; }; sim_env="";; esac if test x"$silent" != x"yes" && test x"$sim_env" != x""; then echo "Setting env flags = $sim_env" 6>&1 fi else sim_env="" fi # Check whether --enable-sim-timebase or --disable-sim-timebase was given. if test "${enable_sim_timebase+set}" = set; then enableval="$enable_sim_timebase" case "${enableval}" in yes) sim_timebase="-DWITH_TIME_BASE=1";; no) sim_timebase="-DWITH_TIME_BASE=0";; *) { echo "configure: error: "--enable-sim-timebase does not take a value"" 1>&2; exit 1; }; sim_timebase="";; esac if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then echo "Setting timebase flags = $sim_timebase" 6>&1 fi else sim_timebase="" fi # Check whether --enable-sim-alignment or --disable-sim-alignment was given. if test "${enable_sim_alignment+set}" = set; then enableval="$enable_sim_alignment" case "${enableval}" in yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";; *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";; esac if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then echo "Setting alignment flags = $sim_alignment" 6>&1 fi else sim_alignment="" fi # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in yes) sim_trace="-DWITH_TRACE=1";; no) sim_trace="-DWITH_TRACE=0";; *) { echo "configure: error: "--enable-sim-trace does not take a value"" 1>&2; exit 1; }; sim_trace="";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting trace flags = $sim_trace" 6>&1 fi else sim_trace="" fi # Check whether --enable-sim-assert or --disable-sim-assert was given. if test "${enable_sim_assert+set}" = set; then enableval="$enable_sim_assert" case "${enableval}" in yes) sim_assert="-DWITH_ASSERT=1";; no) sim_assert="-DWITH_ASSERT=0";; *) { echo "configure: error: "--enable-sim-assert does not take a value"" 1>&2; exit 1; }; sim_assert="";; esac if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then echo "Setting assert flags = $sim_assert" 6>&1 fi else sim_assert="" fi # Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given. if test "${enable_sim_reserved_bits+set}" = set; then enableval="$enable_sim_reserved_bits" case "${enableval}" in yes) sim_reserved="-DWITH_RESERVED_BITS=1";; no) sim_reserved="-DWITH_RESERVED_BITS=0";; *) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved="";; esac if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then echo "Setting reserved flags = $sim_reserved" 6>&1 fi else sim_reserved="" fi # Check whether --enable-sim-float or --disable-sim-float was given. if test "${enable_sim_float+set}" = set; then enableval="$enable_sim_float" case "${enableval}" in yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";; no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";; *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";; esac if test x"$silent" != x"yes" && test x"$sim_float" != x""; then echo "Setting float flags = $sim_float" 6>&1 fi else sim_float="" fi # Check whether --enable-sim-monitor or --disable-sim-monitor was given. if test "${enable_sim_monitor+set}" = set; then enableval="$enable_sim_monitor" case "${enableval}" in yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";; no) sim_monitor="-DWITH_MON=0";; instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";; memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";; *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-mon"" 1>&2; exit 1; }; sim_env="";; esac if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then echo "Setting monitor flags = $sim_monitor" 6>&1 fi else sim_monitor="" fi # Check whether --enable-sim-model or --disable-sim-model was given. if test "${enable_sim_model+set}" = set; then enableval="$enable_sim_model" case "${enableval}" in yes|no) { echo "configure: error: "No value supplied for --enable-sim-model=model"" 1>&2; exit 1; };; *) sim_model="-DWITH_MODEL=${enableval}";; esac if test x"$silent" != x"yes" && test x"$sim_model" != x""; then echo "Setting model flags = $sim_model" 6>&1 fi else sim_model="" fi # Check whether --enable-sim-default-model or --disable-sim-default-model was given. if test "${enable_sim_default_model+set}" = set; then enableval="$enable_sim_default_model" case "${enableval}" in yes|no) { echo "configure: error: "No value supplied for --enable-sim-default-model=model"" 1>&2; exit 1; };; *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";; esac if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then echo "Setting default-model flags = $sim_default_model" 6>&1 fi else sim_model="" fi # Check whether --enable-sim-model-issue or --disable-sim-model-issue was given. if test "${enable_sim_model_issue+set}" = set; then enableval="$enable_sim_model_issue" case "${enableval}" in yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";; no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";; *) { echo "configure: error: "--enable-sim-model-issue does not take a value"" 1>&2; exit 1; }; sim_model_issue="";; esac if test x"$silent" != x"yes"; then echo "Setting model-issue flags = $sim_model_issue" 6>&1 fi else sim_model_issue="" fi # Check whether --enable-sim-stdio or --disable-sim-stdio was given. if test "${enable_sim_stdio+set}" = set; then enableval="$enable_sim_stdio" case "${enableval}" in yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";; esac if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then echo "Setting stdio flags = $sim_stdio" 6>&1 fi else sim_stdio="" fi ac_aux_dir= for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Do some error checking and defaulting for the host and target type. # The inputs are: # configure --host=HOST --target=TARGET --build=BUILD NONOPT # # The rules are: # 1. You are not allowed to specify --host, --target, and nonopt at the # same time. # 2. Host defaults to nonopt. # 3. If nonopt is not specified, then host defaults to the current host, # as determined by config.guess. # 4. Target and build default to nonopt. # 5. If nonopt is not specified, then target and build default to host. # The aliases save the names the user supplied, while $host etc. # will get canonicalized. case $host---$target---$nonopt in NONE---*---* | *---NONE---* | *---*---NONE) ;; *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; esac # Make sure we can run config.sub. if $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`$ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`$ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 target_alias=$target case "$target_alias" in NONE) case $nonopt in NONE) target_alias=$host_alias ;; *) target_alias=$nonopt ;; esac ;; esac target=`$ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 build_alias=$build case "$build_alias" in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`$ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," . ${srcdir}/../../bfd/configure.host echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { struct stat s; s.st_blksize; ; return 0; } EOF if { (eval echo configure:1576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_blksize=yes else rm -rf conftest* ac_cv_struct_st_blksize=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6 if test $ac_cv_struct_st_blksize = yes; then cat >> confdefs.h <<\EOF #define HAVE_ST_BLKSIZE 1 EOF fi echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { struct stat s; s.st_blocks; ; return 0; } EOF if { (eval echo configure:1609: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_blocks=yes else rm -rf conftest* ac_cv_struct_st_blocks=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_st_blocks" 1>&6 if test $ac_cv_struct_st_blocks = yes; then cat >> confdefs.h <<\EOF #define HAVE_ST_BLOCKS 1 EOF else LIBOBJS="$LIBOBJS fileblocks.o" fi echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { struct stat s; s.st_rdev; ; return 0; } EOF if { (eval echo configure:1644: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_rdev=yes else rm -rf conftest* ac_cv_struct_st_rdev=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6 if test $ac_cv_struct_st_rdev = yes; then cat >> confdefs.h <<\EOF #define HAVE_ST_RDEV 1 EOF fi echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { struct tm *tp; tp->tm_sec; ; return 0; } EOF if { (eval echo configure:1677: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm=time.h else rm -rf conftest* ac_cv_struct_tm=sys/time.h fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_tm" 1>&6 if test $ac_cv_struct_tm = sys/time.h; then cat >> confdefs.h <<\EOF #define TM_IN_SYS_TIME 1 EOF fi echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_cv_struct_tm> int main() { return 0; } int t() { struct tm tm; tm.tm_zone; ; return 0; } EOF if { (eval echo configure:1710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm_zone=yes else rm -rf conftest* ac_cv_struct_tm_zone=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_tm_zone" 1>&6 if test "$ac_cv_struct_tm_zone" = yes; then cat >> confdefs.h <<\EOF #define HAVE_TM_ZONE 1 EOF else echo $ac_n "checking for tzname""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif int main() { return 0; } int t() { atoi(*tzname); ; return 0; } EOF if { (eval echo configure:1744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* ac_cv_var_tzname=yes else rm -rf conftest* ac_cv_var_tzname=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_var_tzname" 1>&6 if test $ac_cv_var_tzname = yes; then cat >> confdefs.h <<\EOF #define HAVE_TZNAME 1 EOF fi fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1801: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "uid_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_uid_t=yes else rm -rf conftest* ac_cv_type_uid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_uid_t" 1>&6 if test $ac_cv_type_uid_t = no; then cat >> confdefs.h <<\EOF #define uid_t int EOF cat >> confdefs.h <<\EOF #define gid_t int EOF fi echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_type_getgroups=cross else cat > conftest.$ac_ext < #define NGID 256 #undef MAX #define MAX(x, y) ((x) > (y) ? (x) : (y)) main() { gid_t gidset[NGID]; int i, n; union { gid_t gval; long lval; } val; val.lval = -1; for (i = 0; i < NGID; i++) gidset[i] = val.gval; n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1, gidset); /* Exit non-zero if getgroups seems to require an array of ints. This happens when gid_t is short but getgroups modifies an array of ints. */ exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0); } EOF { (eval echo configure:1887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } if test -s conftest && (./conftest; exit) 2>/dev/null; then ac_cv_type_getgroups=gid_t else ac_cv_type_getgroups=int fi fi rm -fr conftest* if test $ac_cv_type_getgroups = cross; then cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_getgroups=gid_t else rm -rf conftest* ac_cv_type_getgroups=int fi rm -f conftest* fi fi echo "$ac_t""$ac_cv_type_getgroups" 1>&6 cat >> confdefs.h <&6 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF { (eval echo configure:1998: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } if test -s conftest && (./conftest; exit) 2>/dev/null; then : else ac_cv_header_stdc=no fi fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi echo $ac_n "checking for mode_t""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "mode_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_mode_t=yes else rm -rf conftest* ac_cv_type_mode_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_mode_t" 1>&6 if test $ac_cv_type_mode_t = no; then cat >> confdefs.h <<\EOF #define mode_t int EOF fi echo $ac_n "checking for off_t""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "off_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else rm -rf conftest* ac_cv_type_off_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_off_t" 1>&6 if test $ac_cv_type_off_t = no; then cat >> confdefs.h <<\EOF #define off_t long EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "pid_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_pid_t=yes else rm -rf conftest* ac_cv_type_pid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_pid_t" 1>&6 if test $ac_cv_type_pid_t = no; then cat >> confdefs.h <<\EOF #define pid_t int EOF fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #ifdef signal #undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); #else void (*signal ()) (); #endif int main() { return 0; } int t() { int i; ; return 0; } EOF if { (eval echo configure:2133: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else rm -rf conftest* ac_cv_type_signal=int fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_signal" 1>&6 cat >> confdefs.h <&6 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "size_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else rm -rf conftest* ac_cv_type_size_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_size_t" 1>&6 if test $ac_cv_type_size_t = no; then cat >> confdefs.h <<\EOF #define size_t unsigned EOF fi echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "uid_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_uid_t=yes else rm -rf conftest* ac_cv_type_uid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_uid_t" 1>&6 if test $ac_cv_type_uid_t = no; then cat >> confdefs.h <<\EOF #define uid_t int EOF cat >> confdefs.h <<\EOF #define gid_t int EOF fi for ac_func in cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { return 0; } int t() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_hdr in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h do ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2282: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h <&6 fi done ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { return 0; } int t() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:2324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdedfghijklmnopqrstuvwxyz./\055' 'ABCDEDFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for -ldir""... $ac_c" 1>&6 ac_lib_var=`echo dir'_'opendir | tr './+\055' '__p_'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for -lx""... $ac_c" 1>&6 ac_lib_var=`echo x'_'opendir | tr './+\055' '__p_'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi sim_termio="" echo $ac_n "checking for struct termios""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_termios_struct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { static struct termios x; x.c_iflag = 0; x.c_oflag = 0; x.c_cflag = 0; x.c_lflag = 0; x.c_cc[NCCS] = 0; ; return 0; } EOF if { (eval echo configure:2447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termios_struct=yes else rm -rf conftest* ac_cv_termios_struct=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_termios_struct" 1>&6 if test $ac_cv_termios_struct = yes; then sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE" fi if test "$ac_cv_termios_struct" = "yes"; then echo $ac_n "checking for c_line field in struct termios""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_termios_cline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { static struct termios x; x.c_line = 0; ; return 0; } EOF if { (eval echo configure:2478: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termios_cline=yes else rm -rf conftest* ac_cv_termios_cline=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_termios_cline" 1>&6 if test $ac_cv_termios_cline = yes; then sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE" fi else ac_cv_termios_cline=no fi if test "$ac_cv_termios_struct" != "yes"; then echo $ac_n "checking for struct termio""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_termio_struct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { static struct termio x; x.c_iflag = 0; x.c_oflag = 0; x.c_cflag = 0; x.c_lflag = 0; x.c_cc[NCC] = 0; ; return 0; } EOF if { (eval echo configure:2518: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termio_struct=yes else rm -rf conftest* ac_cv_termio_struct=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_termio_struct" 1>&6 if test $ac_cv_termio_struct = yes; then sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE" fi else ac_cv_termio_struct=no fi if test "$ac_cv_termio_struct" = "yes"; then echo $ac_n "checking for c_line field in struct termio""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_termio_cline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { return 0; } int t() { static struct termio x; x.c_line = 0; ; return 0; } EOF if { (eval echo configure:2552: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termio_cline=yes else rm -rf conftest* ac_cv_termio_cline=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_termio_cline" 1>&6 if test $ac_cv_termio_cline = yes; then sim_termio="$sim_termio -DHAVE_TERMIO_CLINE" fi else ac_cv_termio_cline=no fi AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC@%$CC%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@target@%$target%g s%@target_alias@%$target_alias%g s%@target_cpu@%$target_cpu%g s%@target_vendor@%$target_vendor%g s%@target_os@%$target_os%g s%@build@%$build%g s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@LIBOBJS@%$LIBOBJS%g s%@CPP@%$CPP%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g s%@AR@%$AR%g s%@RANLIB@%$RANLIB%g s%@sim_cflags@%$sim_cflags%g s%@sim_warnings@%$sim_warnings%g s%@sim_line_nr@%$sim_line_nr%g s%@sim_config@%$sim_config%g s%@sim_opcode@%$sim_opcode%g s%@sim_switch@%$sim_switch%g s%@sim_dup@%$sim_dup%g s%@sim_jump@%$sim_jump%g s%@sim_filter@%$sim_filter%g s%@sim_icache@%$sim_icache%g s%@sim_inline@%$sim_inline%g s%@sim_bswap@%$sim_bswap%g s%@sim_endian@%$sim_endian%g s%@sim_xor_endian@%$sim_xor_endian%g s%@sim_hostendian@%$sim_hostendian%g s%@sim_smp@%$sim_smp%g s%@sim_igen_smp@%$sim_igen_smp%g s%@sim_bitsize@%$sim_bitsize%g s%@sim_hostbitsize@%$sim_hostbitsize%g s%@sim_env@%$sim_env%g s%@sim_timebase@%$sim_timebase%g s%@sim_alignment@%$sim_alignment%g s%@sim_float@%$sim_float%g s%@sim_trace@%$sim_trace%g s%@sim_assert@%$sim_assert%g s%@sim_reserved@%$sim_reserved%g s%@sim_monitor@%$sim_monitor%g s%@sim_model@%$sim_model%g s%@sim_default_model@%$sim_default_model%g s%@sim_model_issue@%$sim_model_issue%g s%@sim_stdio@%$sim_stdio%g s%@sim_termio@%$sim_termio%g CEOF EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out cp $ac_given_srcdir/$ac_file_in conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. # Maximum number of lines to put in a single here document. ac_max_here_lines=12 rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1