pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig

[people/ms/u-boot.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73909952d0e692df5944b72ba9aa4d4deedf8842..30a6f6dc538a9d3886b1b0aadae5ae2902b2f519 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,6 +19,36 @@ config POSITION_INDEPENDENT
          from almost any address. This logic relies on the relocation
          information that is embedded into the binary to support U-Boot
          relocating itself to the top-of-RAM later during execution.
+
+config SYS_INIT_SP_BSS_OFFSET
+       int
+       help
+         U-Boot typically uses a hard-coded value for the stack pointer
+         before relocation. Define this option to instead calculate the
+         initial SP at run-time. This is useful to avoid hard-coding addresses
+         into U-Boot, so that can be loaded and executed at arbitrary
+         addresses and thus avoid using arbitrary addresses at runtime. This
+         option's value is the offset added to &_bss_start in order to
+         calculate the stack pointer. This offset should be large enough so
+         that the early malloc region, global data (gd), and early stack usage
+         do not overlap any appended DTB.
+
+config LINUX_KERNEL_IMAGE_HEADER
+       bool
+       help
+         Place a Linux kernel image header at the start of the U-Boot binary.
+         The format of the header is described in the Linux kernel source at
+         Documentation/arm64/booting.txt. This feature is useful since the
+         image header reports the amount of memory (BSS and similar) that
+         U-Boot needs to use, but which isn't part of the binary.
+
+if LINUX_KERNEL_IMAGE_HEADER
+config LNX_KRNL_IMG_TEXT_OFFSET_BASE
+       hex
+       help
+         The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
+         TEXT_OFFSET value written in to the Linux kernel image header.
+endif
 endif
 
 config STATIC_RELA
@@ -122,6 +152,9 @@ config ARM_ERRATA_852421
 config ARM_ERRATA_852423
        bool
 
+config ARM_ERRATA_855873
+       bool
+
 config CPU_ARM720T
        bool
        select SYS_CACHE_SHIFT_5
@@ -315,6 +348,7 @@ config ARCH_AT91
 config TARGET_EDB93XX
        bool "Support edb93xx"
        select CPU_ARM920T
+       select PL010_SERIAL
 
 config TARGET_ASPENITE
        bool "Support aspenite"
@@ -366,49 +400,58 @@ config TARGET_APX4DEVKIT
        bool "Support apx4devkit"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_XFI3
        bool "Support xfi3"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_M28EVK
        bool "Support m28evk"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_MX23EVK
        bool "Support mx23evk"
        select CPU_ARM926EJS
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select PL011_SERIAL
 
 config TARGET_MX28EVK
        bool "Support mx28evk"
        select CPU_ARM926EJS
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select PL011_SERIAL
 
 config TARGET_MX23_OLINUXINO
        bool "Support mx23_olinuxino"
        select CPU_ARM926EJS
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select PL011_SERIAL
 
 config TARGET_BG0900
        bool "Support bg0900"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_SANSA_FUZE_PLUS
        bool "Support sansa_fuze_plus"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_SC_SPS_1
        bool "Support sc_sps_1"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config ORION5X
        bool "Marvell Orion"
@@ -419,24 +462,28 @@ config TARGET_SPEAR300
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
        imply CMD_SAVES
+       select PL011_SERIAL
 
 config TARGET_SPEAR310
        bool "Support spear310"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
        imply CMD_SAVES
+       select PL011_SERIAL
 
 config TARGET_SPEAR320
        bool "Support spear320"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
        imply CMD_SAVES
+       select PL011_SERIAL
 
 config TARGET_SPEAR600
        bool "Support spear600"
        select CPU_ARM926EJS
        select BOARD_EARLY_INIT_F
        imply CMD_SAVES
+       select PL011_SERIAL
 
 config TARGET_STV0991
        bool "Support stv0991"
@@ -446,12 +493,14 @@ config TARGET_STV0991
        select DM_SPI
        select DM_SPI_FLASH
        select SPI_FLASH
+       select PL01X_SERIAL
 
 config TARGET_X600
        bool "Support x600"
        select BOARD_LATE_INIT
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config TARGET_IMX31_PHYCORE
        bool "Support imx31_phycore_eet"
@@ -500,6 +549,7 @@ config ARCH_BCM283X
        select DM_SERIAL
        select DM_GPIO
        select OF_CONTROL
+       select PL01X_SERIAL
        imply FAT_WRITE
 
 config TARGET_VEXPRESS_CA15_TC2
@@ -507,14 +557,17 @@ config TARGET_VEXPRESS_CA15_TC2
        select CPU_V7
        select CPU_V7_HAS_NONSEC
        select CPU_V7_HAS_VIRT
+       select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA5X2
        bool "Support vexpress_ca5x2"
        select CPU_V7
+       select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA9X4
        bool "Support vexpress_ca9x4"
        select CPU_V7
+       select PL011_SERIAL
 
 config TARGET_BCM23550_W1D
        bool "Support bcm23550_w1d"
@@ -573,11 +626,13 @@ config ARCH_S5PC1XX
 config ARCH_HIGHBANK
        bool "Calxeda Highbank"
        select CPU_V7
+       select PL011_SERIAL
 
 config ARCH_INTEGRATOR
        bool "ARM Ltd. Integrator family"
        select DM
        select DM_SERIAL
+       select PL01X_SERIAL
 
 config ARCH_KEYSTONE
        bool "TI Keystone"
@@ -642,11 +697,10 @@ config ARCH_MX5
 
 config ARCH_QEMU
        bool "QEMU Virtual Platform"
-       select CPU_V7
-       select ARCH_SUPPORT_PSCI
        select DM
        select DM_SERIAL
        select OF_CONTROL
+       select PL01X_SERIAL
 
 config ARCH_RMOBILE
        bool "Renesas ARM SoCs"
@@ -715,6 +769,7 @@ config ARCH_SUNXI
        select USE_TINY_PRINTF
        imply CMD_GPT
        imply FAT_WRITE
+       imply OF_LIBFDT_OVERLAY
        imply PRE_CONSOLE_BUFFER
        imply SPL_GPIO_SUPPORT
        imply SPL_LIBCOMMON_SUPPORT
@@ -729,6 +784,7 @@ config TARGET_TS4600
        bool "Support TS4600"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select PL011_SERIAL
 
 config ARCH_VF610
        bool "Freescale Vybrid"
@@ -773,7 +829,7 @@ config ARCH_ZYNQMP
        select SUPPORT_SPL
        select CLK
        select SPL_BOARD_INIT if SPL
-       select SPL_CLK
+       select SPL_CLK if SPL
        select DM_USB if USB
        imply FAT_WRITE
 
@@ -784,15 +840,18 @@ config TEGRA
 config TARGET_VEXPRESS64_AEMV8A
        bool "Support vexpress_aemv8a"
        select ARM64
+       select PL01X_SERIAL
 
 config TARGET_VEXPRESS64_BASE_FVP
        bool "Support Versatile Express ARMv8a FVP BASE model"
        select ARM64
        select SEMIHOSTING
+       select PL01X_SERIAL
 
 config TARGET_VEXPRESS64_BASE_FVP_DRAM
        bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
        select ARM64
+       select PL01X_SERIAL
        help
          This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
          the default config to allow the user to load the images directly into
@@ -802,6 +861,7 @@ config TARGET_VEXPRESS64_BASE_FVP_DRAM
 config TARGET_VEXPRESS64_JUNO
        bool "Support Versatile Express Juno Development Platform"
        select ARM64
+       select PL01X_SERIAL
 
 config TARGET_LS2080A_EMU
        bool "Support ls2080a_emu"
@@ -894,6 +954,7 @@ config TARGET_HIKEY
        select DM_GPIO
        select DM_SERIAL
        select OF_CONTROL
+       select PL01X_SERIAL
          help
          Support for HiKey 96boards platform. It features a HI6220
          SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -905,6 +966,7 @@ config TARGET_POPLAR
        select OF_CONTROL
        select DM_SERIAL
        select DM_USB
+       select PL01X_SERIAL
          help
          Support for Poplar 96boards EE platform. It features a HI3798cv200
          SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -935,6 +997,18 @@ config TARGET_LS1012ARDB
          development platform that supports the QorIQ LS1012A
          Layerscape Architecture processor.
 
+config TARGET_LS1012A2G5RDB
+       bool "Support ls1012a2g5rdb"
+       select ARCH_LS1012A
+       select ARM64
+       select BOARD_LATE_INIT
+       imply SCSI
+       help
+         Support for Freescale LS1012A2G5RDB platform.
+         The LS1012A 2G5 Reference design board (RDB) is a high-performance
+         development platform that supports the QorIQ LS1012A
+         Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
        bool "Support ls1012afrdm"
        select ARCH_LS1012A
@@ -1148,6 +1222,7 @@ config TARGET_THUNDERX_88XX
        select ARM64
        select OF_CONTROL
        select SYS_CACHE_SHIFT_7
+       select PL01X_SERIAL
 
 config ARCH_ASPEED
        bool "Support Aspeed SoCs"
@@ -1247,6 +1322,7 @@ source "board/broadcom/bcmns2/Kconfig"
 source "board/cavium/thunderx/Kconfig"
 source "board/cirrus/edb93xx/Kconfig"
 source "board/creative/xfi3/Kconfig"
+source "board/eets/pdu001/Kconfig"
 source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
 source "board/freescale/ls2080ardb/Kconfig"