powerpc: remove 4xx support

[people/ms/u-boot.git] / arch / powerpc / cpu / ppc4xx / u-boot.lds

diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds
deleted file mode 100644 (file)
index 55dd4e1..0000000
--- a/arch/powerpc/cpu/ppc4xx/u-boot.lds
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include "config.h"    /* CONFIG_BOARDDIR */
-
-#ifndef RESET_VECTOR_ADDRESS
-#ifdef CONFIG_RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS   CONFIG_RESET_VECTOR_ADDRESS
-#else
-#define RESET_VECTOR_ADDRESS   0xfffffffc
-#endif
-#endif
-
-OUTPUT_ARCH(powerpc)
-
-PHDRS
-{
-  text PT_LOAD;
-  bss PT_LOAD;
-}
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    *(.text*)
-   } :text
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  } :text
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-       KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : {
-       *(.data.init)
-       . = ALIGN(256);
-       LONG(0) LONG(0)         /* Extend u-boot.bin to here */
-  }
-  __init_end = .;
-  _end = .;
-
-#ifndef CONFIG_SPL
-#ifdef CONFIG_440
-  .bootpg RESET_VECTOR_ADDRESS - 0xffc :
-  {
-    arch/powerpc/cpu/ppc4xx/start.o    (.bootpg)
-
-    /*
-     * PPC440 board need a board specific object with the
-     * TLB definitions. This needs to get included right after
-     * start.o, since the first shadow TLB only covers 4k
-     * of address space.
-     */
-#ifdef CONFIG_INIT_TLB
-    CONFIG_INIT_TLB (.bootpg)
-#else
-    CONFIG_BOARDDIR/init.o     (.bootpg)
-#endif
-  } :text = 0xffff
-#endif
-
-  .resetvec RESET_VECTOR_ADDRESS :
-  {
-    KEEP(*(.resetvec))
-  } :text = 0xffff
-
-  . = RESET_VECTOR_ADDRESS + 0x4;
-
-  /*
-   * Make sure that the bss segment isn't linked at 0x0, otherwise its
-   * address won't be updated during relocation fixups.  Note that
-   * this is a temporary fix.  Code to dynamically the fixup the bss
-   * location will be added in the future.  When the bss relocation
-   * fixup code is present this workaround should be removed.
-   */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
-  . |= 0x10;
-#endif
-#endif /* CONFIG_SPL */
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-  } :bss
-
-  . = ALIGN(4);
-  __bss_end = . ;
-  PROVIDE (end = .);
-}