/* BFD support for handling relocation entries.
- Copyright (C) 1990, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
+ Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
BFD maintains relocations in much the same way it maintains
symbols: they are left alone until required, then read in
- en-mass and translated into an internal form. A common
+ en-masse and translated into an internal form. A common
routine <<bfd_perform_relocation>> acts upon the
canonical form to do the fixup.
type which modifies the bottom two bytes of a four byte word
would not touch the first byte pointed to in a big endian
world.
-
+
o <<addend>>
The <<addend>> is a value provided by the back end to be added (!)
.
.struct reloc_howto_struct
.{
-. {* The type field has mainly a documetary use - the back end can
+. {* The type field has mainly a documentary use - the back end can
. do what it wants with it, though normally the back end's
. external idea of what a reloc number is stored
. in this field. For example, a PC relative word relocation
. {* The textual name of the relocation type. *}
. char *name;
.
-. {* When performing a partial link, some formats must modify the
-. relocations rather than the data - this flag signals this.*}
+. {* Some formats record a relocation addend in the section contents
+. rather than with the relocation. For ELF formats this is the
+. distinction between USE_REL and USE_RELA (though the code checks
+. for USE_REL == 1/0). The value of this field is TRUE if the
+. addend is recorded with the section contents; when performing a
+. partial link (ld -r) the section contents (the data) will be
+. modified. The value of this field is FALSE if addends are
+. recorded with the relocation (in arelent.addend); when performing
+. a partial link the relocation will be modified.
+. All relocations for all ELF USE_RELA targets should set this field
+. to FALSE (values of TRUE should be looked on with suspicion).
+. However, the converse is not true: not all relocations of all ELF
+. USE_REL targets set this field to TRUE. Why this is so is peculiar
+. to each particular target. For relocs that aren't used in partial
+. links (e.g. GOT stuff) it doesn't matter what this is set to. *}
. boolean partial_inplace;
.
. {* The src_mask selects which parts of the read in data
. are to be used in the relocation sum. E.g., if this was an 8 bit
-. bit of data which we read and relocated, this would be
+. byte of data which we read and relocated, this would be
. 0x000000ff. When we have relocs which have an addend, such as
. sun4 extended relocs, the value in the offset part of a
. relocating field is garbage so we never use it. In this case
.#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
.
+
+DESCRIPTION
+ This is used to fill in an empty howto entry in an array.
+
+.#define EMPTY_HOWTO(C) \
+. HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
+.
+
DESCRIPTION
Helper routine to turn a symbol into a relocation value.
bfd_get_reloc_size
SYNOPSIS
- int bfd_get_reloc_size (reloc_howto_type *);
+ unsigned int bfd_get_reloc_size (reloc_howto_type *);
DESCRIPTION
For a reloc_howto_type that operates on a fixed number of bytes,
this returns the number of bytes operated on.
*/
-int
+unsigned int
bfd_get_reloc_size (howto)
reloc_howto_type *howto;
{
case 2: return 4;
case 3: return 0;
case 4: return 8;
+ case 8: return 16;
case -2: return 4;
default: abort ();
}
*/
+/* N_ONES produces N one bits, without overflowing machine arithmetic. */
+#define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
+
+/*
+FUNCTION
+ bfd_check_overflow
+
+SYNOPSIS
+ bfd_reloc_status_type
+ bfd_check_overflow
+ (enum complain_overflow how,
+ unsigned int bitsize,
+ unsigned int rightshift,
+ unsigned int addrsize,
+ bfd_vma relocation);
+
+DESCRIPTION
+ Perform overflow checking on @var{relocation} which has
+ @var{bitsize} significant bits and will be shifted right by
+ @var{rightshift} bits, on a machine with addresses containing
+ @var{addrsize} significant bits. The result is either of
+ @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
+
+*/
+
+bfd_reloc_status_type
+bfd_check_overflow (how, bitsize, rightshift, addrsize, relocation)
+ enum complain_overflow how;
+ unsigned int bitsize;
+ unsigned int rightshift;
+ unsigned int addrsize;
+ bfd_vma relocation;
+{
+ bfd_vma fieldmask, addrmask, signmask, ss, a;
+ bfd_reloc_status_type flag = bfd_reloc_ok;
+
+ a = relocation;
+
+ /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
+ we'll be permissive: extra bits in the field mask will
+ automatically extend the address mask for purposes of the
+ overflow check. */
+ fieldmask = N_ONES (bitsize);
+ addrmask = N_ONES (addrsize) | fieldmask;
+
+ switch (how)
+ {
+ case complain_overflow_dont:
+ break;
+
+ case complain_overflow_signed:
+ /* If any sign bits are set, all sign bits must be set. That
+ is, A must be a valid negative address after shifting. */
+ a = (a & addrmask) >> rightshift;
+ signmask = ~ (fieldmask >> 1);
+ ss = a & signmask;
+ if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
+ flag = bfd_reloc_overflow;
+ break;
+ case complain_overflow_unsigned:
+ /* We have an overflow if the address does not fit in the field. */
+ a = (a & addrmask) >> rightshift;
+ if ((a & ~ fieldmask) != 0)
+ flag = bfd_reloc_overflow;
+ break;
+
+ case complain_overflow_bitfield:
+ /* Bitfields are sometimes signed, sometimes unsigned. We
+ explicitly allow an address wrap too, which means a bitfield
+ of n bits is allowed to store -2**n to 2**n-1. Thus overflow
+ if the value has some, but not all, bits set outside the
+ field. */
+ a >>= rightshift;
+ ss = a & ~ fieldmask;
+ if (ss != 0 && ss != (((bfd_vma) -1 >> rightshift) & ~ fieldmask))
+ flag = bfd_reloc_overflow;
+ break;
+
+ default:
+ abort ();
+ }
+
+ return flag;
+}
/*
FUNCTION
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
- bfd_size_type addr = reloc_entry->address;
+ bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
bfd_vma output_base = 0;
reloc_howto_type *howto = reloc_entry->howto;
asection *reloc_target_output_section;
}
/* Is the address of the relocation really within the section? */
- if (reloc_entry->address > input_section->_cooked_size)
+ if (reloc_entry->address > input_section->_cooked_size /
+ bfd_octets_per_byte (abfd))
return bfd_reloc_outofrange;
/* Work out which section the relocation is targetted at and the
/* WTF?? */
if (abfd->xvec->flavour == bfd_target_coff_flavour
&& strcmp (abfd->xvec->name, "aixcoff-rs6000") != 0
+ && strcmp (abfd->xvec->name, "xcoff-powermac") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
adding in the value contained in the object file. */
if (howto->complain_on_overflow != complain_overflow_dont
&& flag == bfd_reloc_ok)
- {
- bfd_vma check;
-
- /* Get the value that will be used for the relocation, but
- starting at bit position zero. */
- check = relocation >> howto->rightshift;
- switch (howto->complain_on_overflow)
- {
- case complain_overflow_signed:
- {
- /* Assumes two's complement. */
- bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
- bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
-
- /* The above right shift is incorrect for a signed value.
- Fix it up by forcing on the upper bits. */
- if (howto->rightshift > 0
- && (bfd_signed_vma) relocation < 0)
- check |= ((bfd_vma) - 1
- & ~((bfd_vma) - 1
- >> howto->rightshift));
- if ((bfd_signed_vma) check > reloc_signed_max
- || (bfd_signed_vma) check < reloc_signed_min)
- flag = bfd_reloc_overflow;
- }
- break;
- case complain_overflow_unsigned:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_unsigned_max =
- (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if ((bfd_vma) check > reloc_unsigned_max)
- flag = bfd_reloc_overflow;
- }
- break;
- case complain_overflow_bitfield:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_bits = (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if (((bfd_vma) check & ~reloc_bits) != 0
- && ((bfd_vma) check & ~reloc_bits) != (-1 & ~reloc_bits))
- {
- /* The above right shift is incorrect for a signed
- value. See if turning on the upper bits fixes the
- overflow. */
- if (howto->rightshift > 0
- && (bfd_signed_vma) relocation < 0)
- {
- check |= ((bfd_vma) - 1
- & ~((bfd_vma) - 1
- >> howto->rightshift));
- if (((bfd_vma) check & ~reloc_bits) != (-1 & ~reloc_bits))
- flag = bfd_reloc_overflow;
- }
- else
- flag = bfd_reloc_overflow;
- }
- }
- break;
- default:
- abort ();
- }
- }
+ flag = bfd_check_overflow (howto->complain_on_overflow,
+ howto->bitsize,
+ howto->rightshift,
+ bfd_arch_bits_per_address (abfd),
+ relocation);
/*
Either we are relocating all the way, or we don't want to apply
R result
Do this:
- i i i i i o o o o o from bfd_get<size>
- and S S S S S to get the size offset we want
- + r r r r r r r r r r to get the final value to place
+ (( i i i i i o o o o o from bfd_get<size>
+ and S S S S S) to get the size offset we want
+ + r r r r r r r r r r) to get the final value to place
and D D D D D to chop to right size
-----------------------
- A A A A A
+ = A A A A A
And this:
- ... i i i i i o o o o o from bfd_get<size>
- and N N N N N get instruction
+ ( i i i i i o o o o o from bfd_get<size>
+ and N N N N N ) get instruction
-----------------------
- ... B B B B B
+ = B B B B B
And then:
- B B B B B
- or A A A A A
+ ( B B B B B
+ or A A A A A)
-----------------------
- R R R R R R R R R R put into bfd_put<size>
+ = R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
{
case 0:
{
- char x = bfd_get_8 (abfd, (char *) data + addr);
+ char x = bfd_get_8 (abfd, (char *) data + octets);
DOIT (x);
- bfd_put_8 (abfd, x, (unsigned char *) data + addr);
+ bfd_put_8 (abfd, x, (unsigned char *) data + octets);
}
break;
case 1:
- if (relocation)
- {
- short x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
- DOIT (x);
- bfd_put_16 (abfd, x, (unsigned char *) data + addr);
- }
+ {
+ short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
+ DOIT (x);
+ bfd_put_16 (abfd, x, (unsigned char *) data + octets);
+ }
break;
case 2:
- if (relocation)
- {
- long x = bfd_get_32 (abfd, (bfd_byte *) data + addr);
- DOIT (x);
- bfd_put_32 (abfd, x, (bfd_byte *) data + addr);
- }
+ {
+ long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
+ DOIT (x);
+ bfd_put_32 (abfd, x, (bfd_byte *) data + octets);
+ }
break;
case -2:
{
- long x = bfd_get_32 (abfd, (bfd_byte *) data + addr);
+ long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
relocation = -relocation;
DOIT (x);
- bfd_put_32 (abfd, x, (bfd_byte *) data + addr);
+ bfd_put_32 (abfd, x, (bfd_byte *) data + octets);
}
break;
case -1:
{
- long x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
+ long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
relocation = -relocation;
DOIT (x);
- bfd_put_16 (abfd, x, (bfd_byte *) data + addr);
+ bfd_put_16 (abfd, x, (bfd_byte *) data + octets);
}
break;
case 4:
#ifdef BFD64
- if (relocation)
- {
- bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + addr);
- DOIT (x);
- bfd_put_64 (abfd, x, (bfd_byte *) data + addr);
- }
+ {
+ bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
+ DOIT (x);
+ bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
+ }
#else
abort ();
#endif
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
- bfd_size_type addr = reloc_entry->address;
+ bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
bfd_vma output_base = 0;
reloc_howto_type *howto = reloc_entry->howto;
asection *reloc_target_output_section;
if (howto->special_function)
{
bfd_reloc_status_type cont;
+
/* XXX - The special_function calls haven't been fixed up to deal
with creating new relocations and section contents. */
cont = howto->special_function (abfd, reloc_entry, symbol,
else
relocation = symbol->value;
-
reloc_target_output_section = symbol->section->output_section;
/* Convert input-section-relative symbol value to absolute. */
{
/* This is a partial relocation, but inplace, so modify the
reloc record a bit.
-
+
If we've relocated with a symbol with a section, change
into a ref to the section belonging to the symbol. */
-
+
reloc_entry->address += input_section->output_offset;
-
+
/* WTF?? */
if (abfd->xvec->flavour == bfd_target_coff_flavour
&& strcmp (abfd->xvec->name, "aixcoff-rs6000") != 0
+ && strcmp (abfd->xvec->name, "xcoff-powermac") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
/* For m68k-coff, the addend was being subtracted twice during
relocation with -r. Removing the line below this comment
fixes that problem; see PR 2953.
-
+
However, Ian wrote the following, regarding removing the line below,
which explains why it is still enabled: --djm
-
+
If you put a patch like that into BFD you need to check all the COFF
linkers. I am fairly certain that patch will break coff-i386 (e.g.,
SCO); see coff_i386_reloc in coff-i386.c where I worked around the
need to compute the value in a size larger than bitsize, but we
can't reasonably do that for a reloc the same size as a host
machine word.
-
FIXME: We should also do overflow checking on the result after
adding in the value contained in the object file. */
if (howto->complain_on_overflow != complain_overflow_dont)
- {
- bfd_vma check;
-
- /* Get the value that will be used for the relocation, but
- starting at bit position zero. */
- check = relocation >> howto->rightshift;
- switch (howto->complain_on_overflow)
- {
- case complain_overflow_signed:
- {
- /* Assumes two's complement. */
- bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
- bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
-
- /* The above right shift is incorrect for a signed value.
- Fix it up by forcing on the upper bits. */
- if (howto->rightshift > 0
- && (bfd_signed_vma) relocation < 0)
- check |= ((bfd_vma) - 1
- & ~((bfd_vma) - 1
- >> howto->rightshift));
- if ((bfd_signed_vma) check > reloc_signed_max
- || (bfd_signed_vma) check < reloc_signed_min)
- flag = bfd_reloc_overflow;
- }
- break;
- case complain_overflow_unsigned:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_unsigned_max =
- (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if ((bfd_vma) check > reloc_unsigned_max)
- flag = bfd_reloc_overflow;
- }
- break;
- case complain_overflow_bitfield:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_bits = (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if (((bfd_vma) check & ~reloc_bits) != 0
- && ((bfd_vma) check & ~reloc_bits) != (-1 & ~reloc_bits))
- {
- /* The above right shift is incorrect for a signed
- value. See if turning on the upper bits fixes the
- overflow. */
- if (howto->rightshift > 0
- && (bfd_signed_vma) relocation < 0)
- {
- check |= ((bfd_vma) - 1
- & ~((bfd_vma) - 1
- >> howto->rightshift));
- if (((bfd_vma) check & ~reloc_bits) != (-1 & ~reloc_bits))
- flag = bfd_reloc_overflow;
- }
- else
- flag = bfd_reloc_overflow;
- }
- }
- break;
- default:
- abort ();
- }
- }
+ flag = bfd_check_overflow (howto->complain_on_overflow,
+ howto->bitsize,
+ howto->rightshift,
+ bfd_arch_bits_per_address (abfd),
+ relocation);
/*
Either we are relocating all the way, or we don't want to apply
R result
Do this:
- i i i i i o o o o o from bfd_get<size>
- and S S S S S to get the size offset we want
- + r r r r r r r r r r to get the final value to place
+ (( i i i i i o o o o o from bfd_get<size>
+ and S S S S S) to get the size offset we want
+ + r r r r r r r r r r) to get the final value to place
and D D D D D to chop to right size
-----------------------
- A A A A A
+ = A A A A A
And this:
- ... i i i i i o o o o o from bfd_get<size>
- and N N N N N get instruction
+ ( i i i i i o o o o o from bfd_get<size>
+ and N N N N N ) get instruction
-----------------------
- ... B B B B B
+ = B B B B B
And then:
- B B B B B
- or A A A A A
+ ( B B B B B
+ or A A A A A)
-----------------------
- R R R R R R R R R R put into bfd_put<size>
+ = R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
- data = (bfd_byte *) data_start + (addr - data_start_offset);
+ data = (bfd_byte *) data_start + (octets - data_start_offset);
switch (howto->size)
{
break;
case 1:
- if (relocation)
- {
- short x = bfd_get_16 (abfd, (bfd_byte *) data);
- DOIT (x);
- bfd_put_16 (abfd, x, (unsigned char *) data);
- }
+ {
+ short x = bfd_get_16 (abfd, (bfd_byte *) data);
+ DOIT (x);
+ bfd_put_16 (abfd, x, (unsigned char *) data);
+ }
break;
case 2:
- if (relocation)
- {
- long x = bfd_get_32 (abfd, (bfd_byte *) data);
- DOIT (x);
- bfd_put_32 (abfd, x, (bfd_byte *) data);
- }
+ {
+ long x = bfd_get_32 (abfd, (bfd_byte *) data);
+ DOIT (x);
+ bfd_put_32 (abfd, x, (bfd_byte *) data);
+ }
break;
case -2:
{
break;
case 4:
- if (relocation)
- {
- bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data);
- DOIT (x);
- bfd_put_64 (abfd, x, (bfd_byte *) data);
- }
+ {
+ bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data);
+ DOIT (x);
+ bfd_put_64 (abfd, x, (bfd_byte *) data);
+ }
break;
default:
return bfd_reloc_other;
bfd_perform_relocation is so hacked up it is easier to write a new
function than to try to deal with it.
- This routine does a final relocation. It should not be used when
- generating relocateable output.
+ This routine does a final relocation. Whether it is useful for a
+ relocateable link depends upon how the object format defines
+ relocations.
FIXME: This routine ignores any special_function in the HOWTO,
since the existing special_function values have been written for
bfd_vma relocation;
/* Sanity check the address. */
- if (address > input_section->_cooked_size)
+ if (address > input_section->_raw_size)
return bfd_reloc_outofrange;
/* This function assumes that we are dealing with a basic relocation
bfd_byte *location;
{
int size;
- bfd_vma x;
- boolean overflow;
+ bfd_vma x = 0;
+ bfd_reloc_status_type flag;
+ unsigned int rightshift = howto->rightshift;
+ unsigned int bitpos = howto->bitpos;
/* If the size is negative, negate RELOCATION. This isn't very
general. */
which we don't check for. We must either check at every single
operation, which would be tedious, or we must do the computations
in a type larger than bfd_vma, which would be inefficient. */
- overflow = false;
+ flag = bfd_reloc_ok;
if (howto->complain_on_overflow != complain_overflow_dont)
{
- bfd_vma check;
- bfd_signed_vma signed_check;
- bfd_vma add;
- bfd_signed_vma signed_add;
+ bfd_vma addrmask, fieldmask, signmask, ss;
+ bfd_vma a, b, sum;
+
+ /* Get the values to be added together. For signed and unsigned
+ relocations, we assume that all values should be truncated to
+ the size of an address. For bitfields, all the bits matter.
+ See also bfd_check_overflow. */
+ fieldmask = N_ONES (howto->bitsize);
+ addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
+ a = relocation;
+ b = x & howto->src_mask;
- if (howto->rightshift == 0)
- {
- check = relocation;
- signed_check = (bfd_signed_vma) relocation;
- }
- else
+ switch (howto->complain_on_overflow)
{
- /* Drop unwanted bits from the value we are relocating to. */
- check = relocation >> howto->rightshift;
+ case complain_overflow_signed:
+ a = (a & addrmask) >> rightshift;
+
+ /* If any sign bits are set, all sign bits must be set.
+ That is, A must be a valid negative address after
+ shifting. */
+ signmask = ~ (fieldmask >> 1);
+ ss = a & signmask;
+ if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
+ flag = bfd_reloc_overflow;
+
+ /* We only need this next bit of code if the sign bit of B
+ is below the sign bit of A. This would only happen if
+ SRC_MASK had fewer bits than BITSIZE. Note that if
+ SRC_MASK has more bits than BITSIZE, we can get into
+ trouble; we would need to verify that B is in range, as
+ we do for A above. */
+ signmask = ((~ howto->src_mask) >> 1) & howto->src_mask;
+ if ((b & signmask) != 0)
+ {
+ /* Set all the bits above the sign bit. */
+ b -= signmask << 1;
+ }
- /* If this is a signed value, the rightshift just dropped
- leading 1 bits (assuming twos complement). */
- if ((bfd_signed_vma) relocation >= 0)
- signed_check = check;
- else
- signed_check = (check
- | ((bfd_vma) - 1
- & ~((bfd_vma) - 1 >> howto->rightshift)));
- }
+ b = (b & addrmask) >> bitpos;
- /* Get the value from the object file. */
- add = x & howto->src_mask;
-
- /* Get the value from the object file with an appropriate sign.
- The expression involving howto->src_mask isolates the upper
- bit of src_mask. If that bit is set in the value we are
- adding, it is negative, and we subtract out that number times
- two. If src_mask includes the highest possible bit, then we
- can not get the upper bit, but that does not matter since
- signed_add needs no adjustment to become negative in that
- case. */
- signed_add = add;
- if ((add & (((~howto->src_mask) >> 1) & howto->src_mask)) != 0)
- signed_add -= (((~howto->src_mask) >> 1) & howto->src_mask) << 1;
-
- /* Add the value from the object file, shifted so that it is a
- straight number. */
- if (howto->bitpos == 0)
- {
- check += add;
- signed_check += signed_add;
- }
- else
- {
- check += add >> howto->bitpos;
+ /* Now we can do the addition. */
+ sum = a + b;
- /* For the signed case we use ADD, rather than SIGNED_ADD,
- to avoid warnings from SVR4 cc. This is OK since we
- explictly handle the sign bits. */
- if (signed_add >= 0)
- signed_check += add >> howto->bitpos;
- else
- signed_check += ((add >> howto->bitpos)
- | ((bfd_vma) - 1
- & ~((bfd_vma) - 1 >> howto->bitpos)));
- }
+ /* See if the result has the correct sign. Bits above the
+ sign bit are junk now; ignore them. If the sum is
+ positive, make sure we did not have all negative inputs;
+ if the sum is negative, make sure we did not have all
+ positive inputs. The test below looks only at the sign
+ bits, and it really just
+ SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
+ */
+ signmask = (fieldmask >> 1) + 1;
+ if (((~ (a ^ b)) & (a ^ sum)) & signmask)
+ flag = bfd_reloc_overflow;
- switch (howto->complain_on_overflow)
- {
- case complain_overflow_signed:
- {
- /* Assumes two's complement. */
- bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
- bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
-
- if (signed_check > reloc_signed_max
- || signed_check < reloc_signed_min)
- overflow = true;
- }
break;
+
case complain_overflow_unsigned:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_unsigned_max =
- (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if (check > reloc_unsigned_max)
- overflow = true;
- }
+ /* Checking for an unsigned overflow is relatively easy:
+ trim the addresses and add, and trim the result as well.
+ Overflow is normally indicated when the result does not
+ fit in the field. However, we also need to consider the
+ case when, e.g., fieldmask is 0x7fffffff or smaller, an
+ input is 0x80000000, and bfd_vma is only 32 bits; then we
+ will get sum == 0, but there is an overflow, since the
+ inputs did not fit in the field. Instead of doing a
+ separate test, we can check for this by or-ing in the
+ operands when testing for the sum overflowing its final
+ field. */
+ a = (a & addrmask) >> rightshift;
+ b = (b & addrmask) >> bitpos;
+ sum = (a + b) & addrmask;
+ if ((a | b | sum) & ~ fieldmask)
+ flag = bfd_reloc_overflow;
+
break;
+
case complain_overflow_bitfield:
- {
- /* Assumes two's complement. This expression avoids
- overflow if howto->bitsize is the number of bits in
- bfd_vma. */
- bfd_vma reloc_bits = (((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
-
- if ((check & ~reloc_bits) != 0
- && (((bfd_vma) signed_check & ~reloc_bits)
- != (-1 & ~reloc_bits)))
- overflow = true;
- }
+ /* Much like the signed check, but for a field one bit
+ wider, and no trimming with addrmask. We allow a
+ bitfield to represent numbers in the range -2**n to
+ 2**n-1, where n is the number of bits in the field.
+ Note that when bfd_vma is 32 bits, a 32-bit reloc can't
+ overflow, which is exactly what we want. */
+ a >>= rightshift;
+
+ signmask = ~ fieldmask;
+ ss = a & signmask;
+ if (ss != 0 && ss != (((bfd_vma) -1 >> rightshift) & signmask))
+ flag = bfd_reloc_overflow;
+
+ signmask = ((~ howto->src_mask) >> 1) & howto->src_mask;
+ if ((b & signmask) != 0)
+ b -= signmask << 1;
+
+ b >>= bitpos;
+
+ sum = a + b;
+
+ signmask = fieldmask + 1;
+ if (((~ (a ^ b)) & (a ^ sum)) & signmask)
+ flag = bfd_reloc_overflow;
+
break;
+
default:
abort ();
}
}
/* Put RELOCATION in the right bits. */
- relocation >>= (bfd_vma) howto->rightshift;
- relocation <<= (bfd_vma) howto->bitpos;
+ relocation >>= (bfd_vma) rightshift;
+ relocation <<= (bfd_vma) bitpos;
/* Add RELOCATION to the right bits of X. */
x = ((x & ~howto->dst_mask)
break;
}
- return overflow ? bfd_reloc_overflow : bfd_reloc_ok;
+ return flag;
}
/*
BFD_RELOC_32
ENUMX
BFD_RELOC_26
+ENUMX
+ BFD_RELOC_24
ENUMX
BFD_RELOC_16
ENUMX
BFD_RELOC_SPARC_WDISP16
ENUMX
BFD_RELOC_SPARC_WDISP19
-ENUMX
- BFD_RELOC_SPARC_GLOB_JMP
ENUMX
BFD_RELOC_SPARC_7
ENUMX
BFD_RELOC_SPARC_6
ENUMX
BFD_RELOC_SPARC_5
+ENUMEQX
+ BFD_RELOC_SPARC_DISP64
+ BFD_RELOC_64_PCREL
+ENUMX
+ BFD_RELOC_SPARC_PLT64
+ENUMX
+ BFD_RELOC_SPARC_HIX22
+ENUMX
+ BFD_RELOC_SPARC_LOX10
+ENUMX
+ BFD_RELOC_SPARC_H44
+ENUMX
+ BFD_RELOC_SPARC_M44
+ENUMX
+ BFD_RELOC_SPARC_L44
+ENUMX
+ BFD_RELOC_SPARC_REGISTER
ENUMDOC
- Some relocations we're using for SPARC V9 -- subject to change.
+ SPARC64 relocations
+
+ENUM
+ BFD_RELOC_SPARC_REV32
+ENUMDOC
+ SPARC little endian relocation
ENUM
BFD_RELOC_ALPHA_GPDISP_HI16
ENUMDOC
- Alpha ECOFF relocations. Some of these treat the symbol or "addend"
- in some special way.
+ Alpha ECOFF and ELF relocations. Some of these treat the symbol or
+ "addend" in some special way.
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
writing; when reading, it will be the absolute section symbol. The
addend is the displacement in bytes of the "lda" instruction from
relocations out, and is filled in with the file's GP value on
reading, for convenience.
+ENUM
+ BFD_RELOC_ALPHA_GPDISP
+ENUMDOC
+ The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
+ relocation except that there is no accompanying GPDISP_LO16
+ relocation.
+
ENUM
BFD_RELOC_ALPHA_LITERAL
+ENUMX
+ BFD_RELOC_ALPHA_ELF_LITERAL
ENUMX
BFD_RELOC_ALPHA_LITUSE
ENUMDOC
in with the file's GP value on reading, for convenience, as with the
GPDISP_LO16 reloc.
+ The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
+ It should refer to the symbol to be referenced, as with 16_GOTOFF,
+ but it generates output not based on the position within the .got
+ section, but relative to the GP value chosen for the file during the
+ final link stage.
+
The LITUSE reloc, on the instruction using the loaded address, gives
information to the linker that it might be able to use to optimize
away some literal section references. The symbol is ignored (read
The GNU linker currently doesn't do any of this optimizing.
+ENUM
+ BFD_RELOC_ALPHA_USER_LITERAL
+ENUMX
+ BFD_RELOC_ALPHA_USER_LITUSE_BASE
+ENUMX
+ BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF
+ENUMX
+ BFD_RELOC_ALPHA_USER_LITUSE_JSR
+ENUMX
+ BFD_RELOC_ALPHA_USER_GPDISP
+ENUMX
+ BFD_RELOC_ALPHA_USER_GPRELHIGH
+ENUMX
+ BFD_RELOC_ALPHA_USER_GPRELLOW
+ENUMDOC
+ The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
+ process the explicit !<reloc>!sequence relocations, and are mapped
+ into the normal relocations at the end of processing.
+
ENUM
BFD_RELOC_ALPHA_HINT
ENUMDOC
"hint" field of a jmp/jsr/ret instruction, for possible branch-
prediction logic which may be provided on some processors.
+ENUM
+ BFD_RELOC_ALPHA_LINKAGE
+ENUMDOC
+ The LINKAGE relocation outputs a linkage pair in the object file,
+ which is filled by the linker.
+
+ENUM
+ BFD_RELOC_ALPHA_CODEADDR
+ENUMDOC
+ The CODEADDR relocation outputs a STO_CA in the object file,
+ which is filled by the linker.
+
ENUM
BFD_RELOC_MIPS_JMP
ENUMDOC
Bits 27..2 of the relocation address shifted right 2 bits;
simple reloc otherwise.
+ENUM
+ BFD_RELOC_MIPS16_JMP
+ENUMDOC
+ The MIPS16 jump instruction.
+
+ENUM
+ BFD_RELOC_MIPS16_GPREL
+ENUMDOC
+ MIPS16 GP relative reloc.
+
ENUM
BFD_RELOC_HI16
ENUMDOC
BFD_RELOC_MIPS_GOT_HI16
ENUMX
BFD_RELOC_MIPS_GOT_LO16
+ENUMX
+ BFD_RELOC_MIPS_CALL_HI16
+ENUMX
+ BFD_RELOC_MIPS_CALL_LO16
+ENUMX
+ BFD_RELOC_MIPS_SUB
+ENUMX
+ BFD_RELOC_MIPS_GOT_PAGE
+ENUMX
+ BFD_RELOC_MIPS_GOT_OFST
+ENUMX
+ BFD_RELOC_MIPS_GOT_DISP
+COMMENT
ENUMDOC
MIPS ELF relocations.
+COMMENT
+
ENUM
BFD_RELOC_386_GOT32
ENUMX
ENUMDOC
ns32k relocations
+ENUM
+ BFD_RELOC_PJ_CODE_HI16
+ENUMX
+ BFD_RELOC_PJ_CODE_LO16
+ENUMX
+ BFD_RELOC_PJ_CODE_DIR16
+ENUMX
+ BFD_RELOC_PJ_CODE_DIR32
+ENUMX
+ BFD_RELOC_PJ_CODE_REL16
+ENUMX
+ BFD_RELOC_PJ_CODE_REL32
+ENUMDOC
+ Picojava relocs. Not all of these appear in object files.
+
ENUM
BFD_RELOC_PPC_B26
ENUMX
ENUMDOC
Power(rs6000) and PowerPC relocations.
+ENUM
+ BFD_RELOC_I370_D12
+ENUMDOC
+ IBM 370/390 relocations
+
ENUM
BFD_RELOC_CTOR
ENUMDOC
not stored in the instruction.
ENUM
BFD_RELOC_ARM_IMMEDIATE
+ENUMX
+ BFD_RELOC_ARM_ADRL_IMMEDIATE
ENUMX
BFD_RELOC_ARM_OFFSET_IMM
ENUMX
BFD_RELOC_ARM_LITERAL
ENUMX
BFD_RELOC_ARM_IN_POOL
+ENUMX
+ BFD_RELOC_ARM_OFFSET_IMM8
+ENUMX
+ BFD_RELOC_ARM_HWLITERAL
+ENUMX
+ BFD_RELOC_ARM_THUMB_ADD
+ENUMX
+ BFD_RELOC_ARM_THUMB_IMM
+ENUMX
+ BFD_RELOC_ARM_THUMB_SHIFT
+ENUMX
+ BFD_RELOC_ARM_THUMB_OFFSET
+ENUMX
+ BFD_RELOC_ARM_GOT12
+ENUMX
+ BFD_RELOC_ARM_GOT32
+ENUMX
+ BFD_RELOC_ARM_JUMP_SLOT
+ENUMX
+ BFD_RELOC_ARM_COPY
+ENUMX
+ BFD_RELOC_ARM_GLOB_DAT
+ENUMX
+ BFD_RELOC_ARM_PLT32
+ENUMX
+ BFD_RELOC_ARM_RELATIVE
+ENUMX
+ BFD_RELOC_ARM_GOTOFF
+ENUMX
+ BFD_RELOC_ARM_GOTPC
ENUMDOC
These relocs are only used within the ARM assembler. They are not
(at present) written to any object files.
-COMMENT
-{* start-sanitize-arc *}
+ENUM
+ BFD_RELOC_SH_PCDISP8BY2
+ENUMX
+ BFD_RELOC_SH_PCDISP12BY2
+ENUMX
+ BFD_RELOC_SH_IMM4
+ENUMX
+ BFD_RELOC_SH_IMM4BY2
+ENUMX
+ BFD_RELOC_SH_IMM4BY4
+ENUMX
+ BFD_RELOC_SH_IMM8
+ENUMX
+ BFD_RELOC_SH_IMM8BY2
+ENUMX
+ BFD_RELOC_SH_IMM8BY4
+ENUMX
+ BFD_RELOC_SH_PCRELIMM8BY2
+ENUMX
+ BFD_RELOC_SH_PCRELIMM8BY4
+ENUMX
+ BFD_RELOC_SH_SWITCH16
+ENUMX
+ BFD_RELOC_SH_SWITCH32
+ENUMX
+ BFD_RELOC_SH_USES
+ENUMX
+ BFD_RELOC_SH_COUNT
+ENUMX
+ BFD_RELOC_SH_ALIGN
+ENUMX
+ BFD_RELOC_SH_CODE
+ENUMX
+ BFD_RELOC_SH_DATA
+ENUMX
+ BFD_RELOC_SH_LABEL
+ENUMDOC
+ Hitachi SH relocs. Not all of these appear in object files.
+
+ENUM
+ BFD_RELOC_THUMB_PCREL_BRANCH9
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH12
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH23
+ENUMDOC
+ Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
+ be zero and is not stored in the instruction.
+
ENUM
BFD_RELOC_ARC_B22_PCREL
ENUMDOC
ARC 26 bit absolute branch. The lowest two bits must be zero and are not
stored in the instruction. The high 24 bits are installed in bits 23
through 0.
+
+ENUM
+ BFD_RELOC_D10V_10_PCREL_R
+ENUMDOC
+ Mitsubishi D10V relocs.
+ This is a 10-bit reloc with the right 2 bits
+ assumed to be 0.
+ENUM
+ BFD_RELOC_D10V_10_PCREL_L
+ENUMDOC
+ Mitsubishi D10V relocs.
+ This is a 10-bit reloc with the right 2 bits
+ assumed to be 0. This is the same as the previous reloc
+ except it is in the left container, i.e.,
+ shifted left 15 bits.
+ENUM
+ BFD_RELOC_D10V_18
+ENUMDOC
+ This is an 18-bit reloc with the right 2 bits
+ assumed to be 0.
+ENUM
+ BFD_RELOC_D10V_18_PCREL
+ENUMDOC
+ This is an 18-bit reloc with the right 2 bits
+ assumed to be 0.
+
+ENUM
+ BFD_RELOC_D30V_6
+ENUMDOC
+ Mitsubishi D30V relocs.
+ This is a 6-bit absolute reloc.
+ENUM
+ BFD_RELOC_D30V_9_PCREL
+ENUMDOC
+ This is a 6-bit pc-relative reloc with
+ the right 3 bits assumed to be 0.
+ENUM
+ BFD_RELOC_D30V_9_PCREL_R
+ENUMDOC
+ This is a 6-bit pc-relative reloc with
+ the right 3 bits assumed to be 0. Same
+ as the previous reloc but on the right side
+ of the container.
+ENUM
+ BFD_RELOC_D30V_15
+ENUMDOC
+ This is a 12-bit absolute reloc with the
+ right 3 bitsassumed to be 0.
+ENUM
+ BFD_RELOC_D30V_15_PCREL
+ENUMDOC
+ This is a 12-bit pc-relative reloc with
+ the right 3 bits assumed to be 0.
+ENUM
+ BFD_RELOC_D30V_15_PCREL_R
+ENUMDOC
+ This is a 12-bit pc-relative reloc with
+ the right 3 bits assumed to be 0. Same
+ as the previous reloc but on the right side
+ of the container.
+ENUM
+ BFD_RELOC_D30V_21
+ENUMDOC
+ This is an 18-bit absolute reloc with
+ the right 3 bits assumed to be 0.
+ENUM
+ BFD_RELOC_D30V_21_PCREL
+ENUMDOC
+ This is an 18-bit pc-relative reloc with
+ the right 3 bits assumed to be 0.
+ENUM
+ BFD_RELOC_D30V_21_PCREL_R
+ENUMDOC
+ This is an 18-bit pc-relative reloc with
+ the right 3 bits assumed to be 0. Same
+ as the previous reloc but on the right side
+ of the container.
+ENUM
+ BFD_RELOC_D30V_32
+ENUMDOC
+ This is a 32-bit absolute reloc.
+ENUM
+ BFD_RELOC_D30V_32_PCREL
+ENUMDOC
+ This is a 32-bit pc-relative reloc.
+
+ENUM
+ BFD_RELOC_M32R_24
+ENUMDOC
+ Mitsubishi M32R relocs.
+ This is a 24 bit absolute address.
+ENUM
+ BFD_RELOC_M32R_10_PCREL
+ENUMDOC
+ This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
+ENUM
+ BFD_RELOC_M32R_18_PCREL
+ENUMDOC
+ This is an 18-bit reloc with the right 2 bits assumed to be 0.
+ENUM
+ BFD_RELOC_M32R_26_PCREL
+ENUMDOC
+ This is a 26-bit reloc with the right 2 bits assumed to be 0.
+ENUM
+ BFD_RELOC_M32R_HI16_ULO
+ENUMDOC
+ This is a 16-bit reloc containing the high 16 bits of an address
+ used when the lower 16 bits are treated as unsigned.
+ENUM
+ BFD_RELOC_M32R_HI16_SLO
+ENUMDOC
+ This is a 16-bit reloc containing the high 16 bits of an address
+ used when the lower 16 bits are treated as signed.
+ENUM
+ BFD_RELOC_M32R_LO16
+ENUMDOC
+ This is a 16-bit reloc containing the lower 16 bits of an address.
+ENUM
+ BFD_RELOC_M32R_SDA16
+ENUMDOC
+ This is a 16-bit reloc containing the small data area offset for use in
+ add3, load, and store instructions.
+
+ENUM
+ BFD_RELOC_V850_9_PCREL
+ENUMDOC
+ This is a 9-bit reloc
+ENUM
+ BFD_RELOC_V850_22_PCREL
+ENUMDOC
+ This is a 22-bit reloc
+
+ENUM
+ BFD_RELOC_V850_SDA_16_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the short data area pointer.
+ENUM
+ BFD_RELOC_V850_SDA_15_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset (of which only 15 bits are used) from the
+ short data area pointer.
+ENUM
+ BFD_RELOC_V850_ZDA_16_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the zero data area pointer.
+ENUM
+ BFD_RELOC_V850_ZDA_15_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset (of which only 15 bits are used) from the
+ zero data area pointer.
+ENUM
+ BFD_RELOC_V850_TDA_6_8_OFFSET
+ENUMDOC
+ This is an 8 bit offset (of which only 6 bits are used) from the
+ tiny data area pointer.
+ENUM
+ BFD_RELOC_V850_TDA_7_8_OFFSET
+ENUMDOC
+ This is an 8bit offset (of which only 7 bits are used) from the tiny
+ data area pointer.
+ENUM
+ BFD_RELOC_V850_TDA_7_7_OFFSET
+ENUMDOC
+ This is a 7 bit offset from the tiny data area pointer.
+ENUM
+ BFD_RELOC_V850_TDA_16_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the tiny data area pointer.
+COMMENT
+ENUM
+ BFD_RELOC_V850_TDA_4_5_OFFSET
+ENUMDOC
+ This is a 5 bit offset (of which only 4 bits are used) from the tiny
+ data area pointer.
+ENUM
+ BFD_RELOC_V850_TDA_4_4_OFFSET
+ENUMDOC
+ This is a 4 bit offset from the tiny data area pointer.
+ENUM
+ BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the short data area pointer, with the
+ bits placed non-contigously in the instruction.
+ENUM
+ BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the zero data area pointer, with the
+ bits placed non-contigously in the instruction.
+ENUM
+ BFD_RELOC_V850_CALLT_6_7_OFFSET
+ENUMDOC
+ This is a 6 bit offset from the call table base pointer.
+ENUM
+ BFD_RELOC_V850_CALLT_16_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the call table base pointer.
COMMENT
-{* end-sanitize-arc *}
+
+ENUM
+ BFD_RELOC_MN10300_32_PCREL
+ENUMDOC
+ This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
+ instruction.
+ENUM
+ BFD_RELOC_MN10300_16_PCREL
+ENUMDOC
+ This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
+ instruction.
+
+ENUM
+ BFD_RELOC_TIC30_LDP
+ENUMDOC
+ This is a 8bit DP reloc for the tms320c30, where the most
+ significant 8 bits of a 24 bit word are placed into the least
+ significant 8 bits of the opcode.
+
+ENUM
+ BFD_RELOC_FR30_48
+ENUMDOC
+ This is a 48 bit reloc for the FR30 that stores 32 bits.
+ENUM
+ BFD_RELOC_FR30_20
+ENUMDOC
+ This is a 32 bit reloc for the FR30 that stores 20 bits split up into
+ two sections.
+ENUM
+ BFD_RELOC_FR30_6_IN_4
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
+ 4 bits.
+ENUM
+ BFD_RELOC_FR30_8_IN_8
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
+ into 8 bits.
+ENUM
+ BFD_RELOC_FR30_9_IN_8
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
+ into 8 bits.
+ENUM
+ BFD_RELOC_FR30_10_IN_8
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
+ into 8 bits.
+ENUM
+ BFD_RELOC_FR30_9_PCREL
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
+ short offset into 8 bits.
+ENUM
+ BFD_RELOC_FR30_12_PCREL
+ENUMDOC
+ This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
+ short offset into 11 bits.
+
+ENUM
+ BFD_RELOC_MCORE_PCREL_IMM8BY4
+ENUMX
+ BFD_RELOC_MCORE_PCREL_IMM11BY2
+ENUMX
+ BFD_RELOC_MCORE_PCREL_IMM4BY2
+ENUMX
+ BFD_RELOC_MCORE_PCREL_32
+ENUMX
+ BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
+ENUMX
+ BFD_RELOC_MCORE_RVA
+ENUMDOC
+ Motorola Mcore relocations.
+
+ENUM
+ BFD_RELOC_AVR_7_PCREL
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit pc relative
+ short offset into 7 bits.
+ENUM
+ BFD_RELOC_AVR_13_PCREL
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 13 bit pc relative
+ short offset into 12 bits.
+ENUM
+ BFD_RELOC_AVR_16_PM
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 17 bit value (usually
+ program memory address) into 16 bits.
+ENUM
+ BFD_RELOC_AVR_LO8_LDI
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (usually
+ data memory address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_HI8_LDI
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
+ of data memory address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_HH8_LDI
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
+ of program memory address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_LO8_LDI_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (usually data memory address) into 8 bit immediate value of SUBI insn.
+ENUM
+ BFD_RELOC_AVR_HI8_LDI_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (high 8 bit of data memory address) into 8 bit immediate value of
+ SUBI insn.
+ENUM
+ BFD_RELOC_AVR_HH8_LDI_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (most high 8 bit of program memory address) into 8 bit immediate value
+ of LDI or SUBI insn.
+ENUM
+ BFD_RELOC_AVR_LO8_LDI_PM
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (usually
+ command address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_HI8_LDI_PM
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
+ of command address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_HH8_LDI_PM
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
+ of command address) into 8 bit immediate value of LDI insn.
+ENUM
+ BFD_RELOC_AVR_LO8_LDI_PM_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (usually command address) into 8 bit immediate value of SUBI insn.
+ENUM
+ BFD_RELOC_AVR_HI8_LDI_PM_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (high 8 bit of 16 bit command address) into 8 bit immediate value
+ of SUBI insn.
+ENUM
+ BFD_RELOC_AVR_HH8_LDI_PM_NEG
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores negated 8 bit value
+ (high 6 bit of 22 bit command address) into 8 bit immediate
+ value of SUBI insn.
+ENUM
+ BFD_RELOC_AVR_CALL
+ENUMDOC
+ This is a 32 bit reloc for the AVR that stores 23 bit value
+ into 22 bits.
+
+ENUM
+ BFD_RELOC_VTABLE_INHERIT
+ENUMX
+ BFD_RELOC_VTABLE_ENTRY
+ENUMDOC
+ These two relocations are used by the linker to determine which of
+ the entries in a C++ virtual function table are actually used. When
+ the --gc-sections option is given, the linker will zero out the entries
+ that are not used, so that the code for those functions need not be
+ included in the output.
+
+ VTABLE_INHERIT is a zero-space relocation used to describe to the
+ linker the inheritence tree of a C++ virtual function table. The
+ relocation's symbol should be the parent class' vtable, and the
+ relocation should be located at the child vtable.
+
+ VTABLE_ENTRY is a zero-space relocation that describes the use of a
+ virtual function table entry. The reloc's symbol should refer to the
+ table of the class mentioned in the code. Off of that base, an offset
+ describes the entry that is being used. For Rela hosts, this offset
+ is stored in the reloc's addend. For Rel hosts, we are forced to put
+ this offset in the reloc's section offset.
+
ENDSENUM
BFD_RELOC_UNUSED
CODE_FRAGMENT
/*ARGSUSED*/
boolean
bfd_generic_relax_section (abfd, section, link_info, again)
- bfd *abfd;
- asection *section;
- struct bfd_link_info *link_info;
+ bfd *abfd ATTRIBUTE_UNUSED;
+ asection *section ATTRIBUTE_UNUSED;
+ struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
boolean *again;
{
*again = false;
return true;
}
+/*
+INTERNAL_FUNCTION
+ bfd_generic_gc_sections
+
+SYNOPSIS
+ boolean bfd_generic_gc_sections
+ (bfd *, struct bfd_link_info *);
+
+DESCRIPTION
+ Provides default handling for relaxing for back ends which
+ don't do section gc -- i.e., does nothing.
+*/
+
+/*ARGSUSED*/
+boolean
+bfd_generic_gc_sections (abfd, link_info)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
+{
+ return true;
+}
+
/*
INTERNAL_FUNCTION
bfd_generic_get_relocated_section_contents
case bfd_reloc_undefined:
if (!((*link_info->callbacks->undefined_symbol)
(link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
- input_bfd, input_section, (*parent)->address)))
+ input_bfd, input_section, (*parent)->address,
+ true)))
goto error_return;
break;
case bfd_reloc_dangerous:
projects / thirdparty / binutils-gdb.git / blobdiff