powerpc: remove 4xx support

[people/ms/u-boot.git] / board / amcc / acadia / cmd_acadia.c

diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
deleted file mode 100644 (file)
index e9df61b..0000000
--- a/board/amcc/acadia/cmd_acadia.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-
-static u8 boot_267_nor[] = {
-       0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
-       0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-       0x00, 0x00, 0x00, 0x00
-};
-
-static u8 boot_267_nand[] = {
-       0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
-       0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-       0x00, 0x00, 0x00, 0x00
-};
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-       u8 chip;
-       u8 *buf;
-       int cpu_freq;
-
-       if (argc < 3)
-               return cmd_usage(cmdtp);
-
-       cpu_freq = simple_strtol(argv[1], NULL, 10);
-       if (cpu_freq != 267) {
-               printf("Unsupported cpu-frequency - only 267 supported\n");
-               return 1;
-       }
-
-       /* use 0x50 as I2C EEPROM address for now */
-       chip = 0x50;
-
-       if ((strcmp(argv[2], "nor") != 0) &&
-           (strcmp(argv[2], "nand") != 0)) {
-               printf("Unsupported boot-device - only nor|nand support\n");
-               return 1;
-       }
-
-       if (strcmp(argv[2], "nand") == 0) {
-               switch (cpu_freq) {
-               case 267:
-                       buf = boot_267_nand;
-                       break;
-               default:
-                       break;
-               }
-       } else {
-               switch (cpu_freq) {
-               case 267:
-                       buf = boot_267_nor;
-                       break;
-               default:
-                       break;
-               }
-       }
-
-       if (i2c_write(chip, 0, 1, buf, 16) != 0)
-               printf("Error writing to EEPROM at address 0x%x\n", chip);
-       udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-       if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
-               printf("Error2 writing to EEPROM at address 0x%x\n", chip);
-
-       printf("Done\n");
-       printf("Please power-cycle the board for the changes to take effect\n");
-
-       return 0;
-}
-
-U_BOOT_CMD(
-       bootstrap,      3,      0,      do_bootstrap,
-       "program the I2C bootstrap EEPROM",
-       "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
-);