board: sama5d3xek: Convert to CONFIG_DM_VIDEO

[people/ms/u-boot.git] / board / atmel / sama5d3xek / sama5d3xek.c

diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 6d473fc06dbd94e67cc64796d55d0a642c300939..98d846fd79e250e3169f492674ebcfcec7d66865 100644 (file)
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,9 +13,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <debug_uart.h>
-#include <lcd.h>
 #include <linux/ctype.h>
-#include <atmel_hlcdc.h>
 #include <phy.h>
 #include <micrel.h>
 #include <spl.h>
@@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-       .vl_col = 800,
-       .vl_row = 480,
-       .vl_clk = 24000000,
-       .vl_bpix = LCD_BPP,
-       .vl_tft = 1,
-       .vl_hsync_len = 128,
-       .vl_left_margin = 64,
-       .vl_right_margin = 64,
-       .vl_vsync_len = 2,
-       .vl_upper_margin = 22,
-       .vl_lower_margin = 21,
-       .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void sama5d3xek_lcd_hw_init(void)
-{
-       gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
-
-       /* The higher 8 bit of LCD is board related */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0);  /* LCDD16 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0);  /* LCDD17 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0);  /* LCDD18 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0);  /* LCDD19 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0);  /* LCDD20 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0);  /* LCDD21 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0);  /* LCDD22 */
-       at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0);  /* LCDD23 */
-
-       /* Configure lower 16 bit of LCD and enable clock */
-       at91_lcd_hw_init();
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-       ulong dram_size;
-       uint64_t nand_size;
-       int i;
-       char temp[32];
-
-       lcd_printf("%s\n", U_BOOT_VERSION);
-       lcd_printf("(C) 2013 ATMEL Corp\n");
-       lcd_printf("at91@atmel.com\n");
-       lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-                  strmhz(temp, get_cpu_clk_rate()));
-
-       dram_size = 0;
-       for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-               dram_size += gd->bd->bi_dram[i].size;
-
-       nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
-       for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-               nand_size += get_nand_dev_by_index(i)->size;
-#endif
-       lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
-                  dram_size >> 20, nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
 {
@@ -239,10 +163,6 @@ int board_init(void)
 #endif
 #ifdef CONFIG_GENERIC_ATMEL_MCI
        sama5d3xek_mci_hw_init();
-#endif
-#ifdef CONFIG_LCD
-       if (has_lcdc())
-               sama5d3xek_lcd_hw_init();
 #endif
        return 0;
 }
@@ -268,6 +188,9 @@ int board_late_init(void)
 
        strcat(name, "ek.dtb");
        env_set("dtb_name", name);
+#endif
+#ifdef CONFIG_DM_VIDEO
+       at91_video_show_board_info();
 #endif
        return 0;
 }