/*
* (C) Copyright 2007-2009 DENX Software Engineering
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
+#include <net.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
DECLARE_GLOBAL_DATA_PTR;
-/* Clocks in use */
-#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
- CLOCK_SCCR1_DDR_EN | \
- CLOCK_SCCR1_FEC_EN | \
- CLOCK_SCCR1_LPC_EN | \
- CLOCK_SCCR1_NFC_EN | \
- CLOCK_SCCR1_PATA_EN | \
- CLOCK_SCCR1_PCI_EN | \
- CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
- CLOCK_SCCR1_PSCFIFO_EN | \
- CLOCK_SCCR1_TPR_EN)
-
-#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \
- CLOCK_SCCR2_I2C_EN | \
- CLOCK_SCCR2_MEM_EN | \
- CLOCK_SCCR2_SPDIF_EN)
-
void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
int board_early_init_f(void)
{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 spridr;
-
- /*
- * Initialize Local Window for the CPLD registers access (CS2 selects
- * the CPLD chip)
- */
- out_be32(&im->sysconf.lpcs2aw,
- CSAW_START(CONFIG_SYS_CPLD_BASE) |
- CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
- sync_law(&im->sysconf.lpcs2aw);
-
/*
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
*
* write commands in order to establish the device ID.
*/
-#ifdef CONFIG_ADS5121_REV2
+#ifdef CONFIG_MPC5121ADS_REV2
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
#else
if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
}
#endif
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
+ return 0;
+}
- spridr = in_be32(&im->sysconf.spridr);
+int is_micron(void){
- if (SVR_MJREV (spridr) >= 2)
- out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
+ ushort brd_rev = *(vu_short *)(CONFIG_SYS_CPLD_BASE + 0x00);
+ uchar macaddr[6];
+ u32 brddate, macchk, ismicron;
/*
- * Enable clocks
+ * MAC address has serial number with date of manufacture
+ * Boards made before Nov-08 #1180 use Micron memory;
+ * 001e59 is the STx vendor #
+ * Default is Elpida since it works for both but is slightly slower
*/
- out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN);
- out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN);
-#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
- setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
-#endif
-
- return 0;
+ ismicron = 0;
+ if (brd_rev >= 0x0400 && eth_getenv_enetaddr("ethaddr", macaddr)) {
+ brddate = (macaddr[3] << 16) + (macaddr[4] << 8) + macaddr[5];
+ macchk = (macaddr[0] << 16) + (macaddr[1] << 8) + macaddr[2];
+ debug("brddate = %d\n\t", brddate);
+
+ if (macchk == 0x001e59 && brddate <= 8111180)
+ ismicron = 1;
+ } else if (brd_rev < 0x400) {
+ ismicron = 1;
+ }
+ debug("Using %s Memory settings\n\t",
+ ismicron ? "Micron" : "Elpida");
+ return(ismicron);
}
-phys_size_t initdram(int board_type)
+int dram_init(void)
{
u32 msize = 0;
+ /*
+ * Elpida MDDRC and initialization settings are an alternative
+ * to the Default Micron ones for all but the earliest Rev 4 boards
+ */
+ ddr512x_config_t elpida_mddrc_config = {
+ .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA,
+ .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
+ .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA,
+ .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA,
+ };
+
+ u32 elpida_init_sequence[] = {
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_EM2,
+ CONFIG_SYS_DDRCMD_EM3,
+ CONFIG_SYS_DDRCMD_EN_DLL,
+ CONFIG_SYS_ELPIDA_RES_DLL,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_ELPIDA_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_OCD_DEFAULT,
+ CONFIG_SYS_ELPIDA_OCD_EXIT,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP
+ };
+
+ if (is_micron()) {
+ msize = fixed_sdram(NULL, NULL, 0);
+ } else {
+ msize = fixed_sdram(&elpida_mddrc_config,
+ elpida_init_sequence,
+ sizeof(elpida_init_sequence)/sizeof(u32));
+ }
- msize = fixed_sdram();
+ gd->ram_size = msize;
- return msize;
+ return 0;
}
int misc_init_r(void)
{
- u8 tmp_val;
-
- /* Using this for DIU init before the driver in linux takes over
- * Enable the TFP410 Encoder (I2C address 0x38)
- */
-
- i2c_set_bus_num(2);
- tmp_val = 0xBF;
- i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
- /* Verify if enabled */
- tmp_val = 0;
- i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
-
- tmp_val = 0x10;
- i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
- /* Verify if enabled */
- tmp_val = 0;
- i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
-
-#ifdef CONFIG_FSL_DIU_FB
-# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
- mpc5121_diu_init();
-# endif
-#endif
return 0;
}
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 spridr = in_be32(&im->sysconf.spridr);
- printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
+ printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
return 0;
}
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ return 0;
}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#endif /* CONFIG_OF_BOARD_SETUP */
projects / people / ms / u-boot.git / blobdiff