int checkboard (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile uchar *latch;
uchar rev, mod;
/* ------------------------------------------------------------------------- */
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0 = 0;
long int size_b1 = 0;
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_mar = 0x00000088;
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
-/* memctl->memc_or1 = CFG_OR1_PRELIM; */
-/* memctl->memc_br1 = CFG_BR1_PRELIM; */
+/* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; */
+/* memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */
-/* memctl->memc_or2 = CFG_OR2_PRELIM; */
-/* memctl->memc_br2 = CFG_BR2_PRELIM; */
+/* memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; */
+/* memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; */
- memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
size_b1 = 0x00800000;
size_b2 = 0x00800000;
size_b3 = 0x00800000;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF800A00;
memctl->memc_br1 = 0x00000081;
size_b1 = 0x01000000;
size_b2 = 0x01000000;
size_b3 = 0x01000000;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF000A00;
memctl->memc_br1 = 0x00000081;
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile long int *addr;
ulong cnt, val;
int misc_init_r (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#ifdef CONFIG_IDE_LED
/* Configure PA8 as output port */