FSL DDR: Convert sbc8548 to new DDR code.

[people/ms/u-boot.git] / board / sbc8548 / ddr.c

diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c
new file mode 100644 (file)
index 0000000..f07d746
--- /dev/null
+++ b/board/sbc8548/ddr.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+
+static void
+get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+       i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+       return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+                       unsigned int ctrl_num)
+{
+       unsigned int i;
+
+       if (ctrl_num) {
+               printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+               return;
+       }
+
+       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+               get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
+       }
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+{
+       /*
+        * Factors to consider for clock adjust:
+        *      - number of chips on bus
+        *      - position of slot
+        *      - DDR1 vs. DDR2?
+        *      - ???
+        *
+        * This needs to be determined on a board-by-board basis.
+        *      0110    3/4 cycle late
+        *      0111    7/8 cycle late
+        */
+       popts->clk_adjust = 7;
+
+       /*
+        * Factors to consider for CPO:
+        *      - frequency
+        *      - ddr1 vs. ddr2
+        */
+       popts->cpo_override = 10;
+
+       /*
+        * Factors to consider for write data delay:
+        *      - number of DIMMs
+        *
+        * 1 = 1/4 clock delay
+        * 2 = 1/2 clock delay
+        * 3 = 3/4 clock delay
+        * 4 = 1   clock delay
+        * 5 = 5/4 clock delay
+        * 6 = 3/2 clock delay
+        */
+       popts->write_data_delay = 3;
+
+       /*
+        * Factors to consider for half-strength driver enable:
+        *      - number of DIMMs installed
+        */
+       popts->half_strength_driver_enable = 0;
+}