env: Rename getenv/_f() to env_get()

[people/ms/u-boot.git] / board / ti / am43xx / board.c

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 2572029a256deeafd2b1e655ea18afe69b74b5e6..2c417e75459c7741123bddc6d4f493bb4990f776 100644 (file)
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -20,6 +20,7 @@
 #include <asm/arch/ddr_defs.h>
 #include <asm/arch/gpio.h>
 #include <asm/emif.h>
+#include <asm/omap_common.h>
 #include "../common/board_detect.h"
 #include "board.h"
 #include <power/pmic.h>
@@ -42,15 +43,14 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_TI_I2C_BOARD_DETECT
 void do_board_detect(void)
 {
-       if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+       if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+                                CONFIG_EEPROM_CHIP_ADDRESS))
                printf("ti_i2c_eeprom_init failed\n");
 }
 #endif
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 
-#define NUM_OPPS       6
-
 const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
        {       /* 19.2 MHz */
                {125, 3, 2, -1, -1, -1, -1},    /* OPP 50 */
@@ -317,25 +317,6 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
        return;
 }
 
-/*
- * get_sys_clk_index : returns the index of the sys_clk read from
- *                     ctrl status register. This value is either
- *                     read from efuse or sysboot pins.
- */
-static u32 get_sys_clk_index(void)
-{
-       struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
-       u32 ind = readl(&ctrl->statusreg), src;
-
-       src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
-       if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
-               return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
-                       CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
-       else /* Value read from SYS BOOT pins */
-               return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
-                       CTRL_SYSBOOT_15_14_SHIFT);
-}
-
 const struct dpll_params *get_dpll_ddr_params(void)
 {
        int ind = get_sys_clk_index();
@@ -441,6 +422,13 @@ void scale_vcores_generic(u32 m)
                printf("%s failure\n", __func__);
                return;
        }
+
+       /* Set DCDC3 (DDR) voltage */
+       if (tps65218_voltage_update(TPS65218_DCDC3,
+           TPS65218_DCDC3_VOLT_SEL_1350MV)) {
+               printf("%s failure\n", __func__);
+               return;
+       }
 }
 
 void scale_vcores_idk(u32 m)
@@ -638,7 +626,7 @@ int board_late_init(void)
         * on HS devices.
         */
        if (get_device_type() == HS_DEVICE)
-               setenv("boot_fit", "1");
+               env_set("boot_fit", "1");
 #endif
        return 0;
 }
@@ -803,10 +791,10 @@ int board_eth_init(bd_t *bis)
        mac_addr[4] = mac_lo & 0xFF;
        mac_addr[5] = (mac_lo & 0xFF00) >> 8;
 
-       if (!getenv("ethaddr")) {
+       if (!env_get("ethaddr")) {
                puts("<ethaddr> not set. Validating first E-fuse MAC\n");
                if (is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("ethaddr", mac_addr);
+                       eth_env_set_enetaddr("ethaddr", mac_addr);
        }
 
        mac_lo = readl(&cdev->macid1l);
@@ -818,9 +806,9 @@ int board_eth_init(bd_t *bis)
        mac_addr[4] = mac_lo & 0xFF;
        mac_addr[5] = (mac_lo & 0xFF00) >> 8;
 
-       if (!getenv("eth1addr")) {
+       if (!env_get("eth1addr")) {
                if (is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("eth1addr", mac_addr);
+                       eth_env_set_enetaddr("eth1addr", mac_addr);
        }
 
        if (board_is_eposevm()) {
@@ -850,6 +838,15 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+       ft_cpu_setup(blob, bd);
+
+       return 0;
+}
+#endif
+
 #ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)
 {
@@ -871,4 +868,11 @@ void board_fit_image_post_process(void **p_image, size_t *p_size)
 {
        secure_boot_verify_image(p_image, p_size);
 }
+
+void board_tee_image_process(ulong tee_image, size_t tee_size)
+{
+       secure_tee_install((u32)tee_image);
+}
+
+U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, board_tee_image_process);
 #endif