sh: Fix linking of ms7722se

[people/ms/u-boot.git] / configs / at91sam9263ek_nandflash_defconfig

diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index d6a14c3c7a6ad0c492d302172a217f588a45168a..ef7a79d7b69589635d5c75161be31b6e1eeea8db 100644 (file)
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
@@ -16,11 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -34,6 +37,10 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
@@ -45,6 +52,10 @@ CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y