#include <errno.h>
#include <mapmem.h>
#include <syscon.h>
+#include <bitfield.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cru_rk3399.h>
/* CLKSEL_CON26 */
CLK_SARADC_DIV_CON_SHIFT = 8,
- CLK_SARADC_DIV_CON_MASK = 0xff << CLK_SARADC_DIV_CON_SHIFT,
+ CLK_SARADC_DIV_CON_MASK = GENMASK(15, 8),
+ CLK_SARADC_DIV_CON_WIDTH = 8,
/* CLKSEL_CON27 */
CLK_TSADC_SEL_X24M = 0x0,
return 0;
}
-#ifdef CONFIG_SPL_BUILD
-static void rkclk_init(struct rk3399_cru *cru)
-{
- u32 aclk_div;
- u32 hclk_div;
- u32 pclk_div;
-
- /*
- * some cru registers changed by bootrom, we'd better reset them to
- * reset/default values described in TRM to avoid confusion in kernel.
- * Please consider these three lines as a fix of bootrom bug.
- */
- rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101);
- rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f);
- rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003);
-
- /* configure gpll cpll */
- rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg);
- rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg);
-
- /* configure perihp aclk, hclk, pclk */
- aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
- assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
-
- hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
- assert((hclk_div + 1) * PERIHP_HCLK_HZ ==
- PERIHP_ACLK_HZ && (hclk_div < 0x4));
-
- pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
- assert((pclk_div + 1) * PERIHP_PCLK_HZ ==
- PERIHP_ACLK_HZ && (pclk_div < 0x7));
-
- rk_clrsetreg(&cru->clksel_con[14],
- PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK |
- ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
- pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
- hclk_div << HCLK_PERIHP_DIV_CON_SHIFT |
- ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
- aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
-
- /* configure perilp0 aclk, hclk, pclk */
- aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1;
- assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
-
- hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1;
- assert((hclk_div + 1) * PERILP0_HCLK_HZ ==
- PERILP0_ACLK_HZ && (hclk_div < 0x4));
-
- pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1;
- assert((pclk_div + 1) * PERILP0_PCLK_HZ ==
- PERILP0_ACLK_HZ && (pclk_div < 0x7));
-
- rk_clrsetreg(&cru->clksel_con[23],
- PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK |
- ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK,
- pclk_div << PCLK_PERILP0_DIV_CON_SHIFT |
- hclk_div << HCLK_PERILP0_DIV_CON_SHIFT |
- ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT |
- aclk_div << ACLK_PERILP0_DIV_CON_SHIFT);
-
- /* perilp1 hclk select gpll as source */
- hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1;
- assert((hclk_div + 1) * PERILP1_HCLK_HZ ==
- GPLL_HZ && (hclk_div < 0x1f));
-
- pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1;
- assert((pclk_div + 1) * PERILP1_HCLK_HZ ==
- PERILP1_HCLK_HZ && (hclk_div < 0x7));
-
- rk_clrsetreg(&cru->clksel_con[25],
- PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK |
- HCLK_PERILP1_PLL_SEL_MASK,
- pclk_div << PCLK_PERILP1_DIV_CON_SHIFT |
- hclk_div << HCLK_PERILP1_DIV_CON_SHIFT |
- HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT);
-}
-#endif
-
void rk3399_configure_cpu(struct rk3399_cru *cru,
enum apll_l_frequencies apll_l_freq)
{
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
break;
default:
- error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+ pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
}
rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
return set_rate;
}
+
+static ulong rk3399_saradc_get_clk(struct rk3399_cru *cru)
+{
+ u32 div, val;
+
+ val = readl(&cru->clksel_con[26]);
+ div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
+ CLK_SARADC_DIV_CON_WIDTH);
+
+ return DIV_TO_RATE(OSC_HZ, div);
+}
+
+static ulong rk3399_saradc_set_clk(struct rk3399_cru *cru, uint hz)
+{
+ int src_clk_div;
+
+ src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
+ assert(src_clk_div < 128);
+
+ rk_clrsetreg(&cru->clksel_con[26],
+ CLK_SARADC_DIV_CON_MASK,
+ src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
+
+ return rk3399_saradc_get_clk(cru);
+}
+
static ulong rk3399_clk_get_rate(struct clk *clk)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
break;
case PCLK_EFUSE1024NS:
break;
+ case SCLK_SARADC:
+ rate = rk3399_saradc_get_clk(priv->cru);
+ break;
default:
return -ENOENT;
}
break;
case PCLK_EFUSE1024NS:
break;
+ case SCLK_SARADC:
+ ret = rk3399_saradc_set_clk(priv->cru, rate);
+ break;
default:
return -ENOENT;
}
return ret;
}
+static int rk3399_clk_enable(struct clk *clk)
+{
+ switch (clk->id) {
+ case HCLK_HOST0:
+ case HCLK_HOST0_ARB:
+ case HCLK_HOST1:
+ case HCLK_HOST1_ARB:
+ return 0;
+ }
+
+ debug("%s: unsupported clk %ld\n", __func__, clk->id);
+ return -ENOENT;
+}
+
static struct clk_ops rk3399_clk_ops = {
.get_rate = rk3399_clk_get_rate,
.set_rate = rk3399_clk_set_rate,
+ .enable = rk3399_clk_enable,
};
+#ifdef CONFIG_SPL_BUILD
+static void rkclk_init(struct rk3399_cru *cru)
+{
+ u32 aclk_div;
+ u32 hclk_div;
+ u32 pclk_div;
+
+ rk3399_configure_cpu(cru, APLL_L_600_MHZ);
+ /*
+ * some cru registers changed by bootrom, we'd better reset them to
+ * reset/default values described in TRM to avoid confusion in kernel.
+ * Please consider these three lines as a fix of bootrom bug.
+ */
+ rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101);
+ rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f);
+ rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003);
+
+ /* configure gpll cpll */
+ rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg);
+ rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg);
+
+ /* configure perihp aclk, hclk, pclk */
+ aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
+ assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+ hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
+ assert((hclk_div + 1) * PERIHP_HCLK_HZ ==
+ PERIHP_ACLK_HZ && (hclk_div < 0x4));
+
+ pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
+ assert((pclk_div + 1) * PERIHP_PCLK_HZ ==
+ PERIHP_ACLK_HZ && (pclk_div < 0x7));
+
+ rk_clrsetreg(&cru->clksel_con[14],
+ PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK |
+ ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
+ pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
+ hclk_div << HCLK_PERIHP_DIV_CON_SHIFT |
+ ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
+ aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
+
+ /* configure perilp0 aclk, hclk, pclk */
+ aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1;
+ assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+ hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1;
+ assert((hclk_div + 1) * PERILP0_HCLK_HZ ==
+ PERILP0_ACLK_HZ && (hclk_div < 0x4));
+
+ pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1;
+ assert((pclk_div + 1) * PERILP0_PCLK_HZ ==
+ PERILP0_ACLK_HZ && (pclk_div < 0x7));
+
+ rk_clrsetreg(&cru->clksel_con[23],
+ PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK |
+ ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK,
+ pclk_div << PCLK_PERILP0_DIV_CON_SHIFT |
+ hclk_div << HCLK_PERILP0_DIV_CON_SHIFT |
+ ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT |
+ aclk_div << ACLK_PERILP0_DIV_CON_SHIFT);
+
+ /* perilp1 hclk select gpll as source */
+ hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1;
+ assert((hclk_div + 1) * PERILP1_HCLK_HZ ==
+ GPLL_HZ && (hclk_div < 0x1f));
+
+ pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1;
+ assert((pclk_div + 1) * PERILP1_HCLK_HZ ==
+ PERILP1_HCLK_HZ && (hclk_div < 0x7));
+
+ rk_clrsetreg(&cru->clksel_con[25],
+ PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK |
+ HCLK_PERILP1_PLL_SEL_MASK,
+ pclk_div << PCLK_PERILP1_DIV_CON_SHIFT |
+ hclk_div << HCLK_PERILP1_DIV_CON_SHIFT |
+ HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT);
+}
+#endif
+
static int rk3399_clk_probe(struct udevice *dev)
{
#ifdef CONFIG_SPL_BUILD
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_clk_plat *plat = dev_get_platdata(dev);
- priv->cru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]);
+ priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
rkclk_init(priv->cru);
#endif
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_clk_priv *priv = dev_get_priv(dev);
- priv->cru = (struct rk3399_cru *)devfdt_get_addr(dev);
+ priv->cru = dev_read_addr_ptr(dev);
#endif
return 0;
}
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_pmuclk_plat *plat = dev_get_platdata(dev);
- priv->pmucru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]);
+ priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
#ifndef CONFIG_SPL_BUILD
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
- priv->pmucru = (struct rk3399_pmucru *)devfdt_get_addr(dev);
+ priv->pmucru = dev_read_addr_ptr(dev);
#endif
return 0;
}
projects / people / ms / u-boot.git / blobdiff