}
/* Interface - look at tsec */
- phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
+ phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
phydev->supported &= supported;
phydev->advertising = phydev->supported;
/* Setting axi emac and phy to proper setting */
static int setup_phy(struct udevice *dev)
{
- u32 speed, emmc_reg;
+ u16 temp;
+ u32 speed, emmc_reg, ret;
struct axidma_priv *priv = dev_get_priv(dev);
struct axi_regs *regs = priv->iobase;
struct phy_device *phydev = priv->phydev;
+ if (priv->interface == PHY_INTERFACE_MODE_SGMII) {
+ /*
+ * In SGMII cases the isolate bit might set
+ * after DMA and ethernet resets and hence
+ * check and clear if set.
+ */
+ ret = phyread(priv, priv->phyaddr, MII_BMCR, &temp);
+ if (ret)
+ return 0;
+ if (temp & BMCR_ISOLATE) {
+ temp &= ~BMCR_ISOLATE;
+ ret = phywrite(priv, priv->phyaddr, MII_BMCR, temp);
+ if (ret)
+ return 0;
+ }
+ }
+
if (phy_startup(phydev)) {
printf("axiemac: could not initialize PHY %s\n",
phydev->dev->name);
priv->bus->read = axiemac_miiphy_read;
priv->bus->write = axiemac_miiphy_write;
priv->bus->priv = priv;
- strcpy(priv->bus->name, "axi_emac");
- ret = mdio_register(priv->bus);
+ ret = mdio_register_seq(priv->bus, dev->seq);
if (ret)
return ret;
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct axidma_priv *priv = dev_get_priv(dev);
+ int node = dev_of_offset(dev);
int offset = 0;
const char *phy_mode;
- pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
priv->iobase = (struct axi_regs *)pdata->iobase;
- offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
"axistream-connected");
if (offset <= 0) {
printf("%s: axistream is not found\n", __func__);
priv->phyaddr = -1;
- offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
- "phy-handle");
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
if (offset > 0)
priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
- phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
if (phy_mode)
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
if (pdata->phy_interface == -1) {
- debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
return -EINVAL;
}
priv->interface = pdata->phy_interface;