Revert "serial: ns16550: Add RX interrupt buffer support"

[people/ms/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 58fc7cd2e66a75e50041f9a83c7a4273dbd17a87..1c2c5d66e1d67a6f8a73d1ef48556bc8eaa6dc6a 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -65,7 +65,7 @@ config DM_SERIAL
          defined in include/serial.h.
 
 config SPL_DM_SERIAL
-       bool "Enable Driver Model for serial drivers"
+       bool "Enable Driver Model for serial drivers in SPL"
        depends on DM_SERIAL
        default y if SPL && DM_SERIAL
        help
@@ -75,7 +75,7 @@ config SPL_DM_SERIAL
          defined in include/serial.h.
 
 config TPL_DM_SERIAL
-       bool "Enable Driver Model for serial drivers"
+       bool "Enable Driver Model for serial drivers in TPL"
        depends on DM_SERIAL
        default y if TPL && DM_SERIAL
        help
@@ -248,6 +248,14 @@ config DEBUG_UART_PIC32
          will need to provide parameters to make this work. The driver will
          be available until the real driver model serial is running.
 
+config DEBUG_UART_MXC
+       bool "IMX Serial port"
+       depends on MXC_UART
+       help
+         Select this to enable a debug UART using the serial_mxc driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+
 config DEBUG_UART_UNIPHIER
        bool "UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
@@ -446,6 +454,14 @@ config SANDBOX_SERIAL
             -t raw             Raw mode, Ctrl-C is processed by U-Boot
             -t cooked          Cooked mode, Ctrl-C terminates
 
+config SCIF_CONSOLE
+       bool "Renesas SCIF UART support"
+       depends on SH || ARCH_RMOBILE
+       help
+         Select this to enable Renesas SCIF UART. To operate serial ports
+         on systems with RCar or SH SoCs, say Y to this option. If unsure,
+         say N.
+
 config UNIPHIER_SERIAL
        bool "Support for UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
@@ -491,4 +507,64 @@ config STI_ASC_SERIAL
          on STiH410 SoC. This is a basic implementation,  it supports
          following baudrate 9600, 19200, 38400, 57600 and 115200.
 
+config STM32X7_SERIAL
+       bool "STMicroelectronics STM32 SoCs on-chip UART"
+       depends on DM_SERIAL && STM32F7
+       help
+         If you have a machine based on a STM32 F7 you can enable its
+         onboard serial ports, say Y to this option. If unsure, say N.
+
+config MPC8XX_CONS
+       bool "Console driver for MPC8XX"
+       depends on 8xx
+       default y
+
+choice
+       prompt "Console port"
+       default 8xx_CONS_SMC1
+       depends on MPC8XX_CONS
+       help
+         Depending on board, select one serial port
+         (CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2)
+
+config 8xx_CONS_SMC1
+       bool "SMC1"
+
+config 8xx_CONS_SMC2
+       bool "SMC2"
+
+endchoice
+
+config SYS_SMC_RXBUFLEN
+       int "Console Rx buffer length"
+       depends on MPC8XX_CONS
+       default 1
+       help
+         With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
+         the maximum receive buffer length for the SMC.
+         This option is actual only for 8xx possible.
+         If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
+         must be defined, to setup the maximum idle timeout for
+         the SMC.
+
+config SYS_MAXIDLE
+       int "maximum idle timeout"
+       depends on MPC8XX_CONS
+       default 0
+
+config SYS_BRGCLK_PRESCALE
+       int "BRG Clock Prescale"
+       depends on MPC8XX_CONS
+       default 1
+
+config SYS_SDSR
+       hex "SDSR Value"
+       depends on MPC8XX_CONS
+       default 0x83
+
+config SYS_SDMR
+       hex "SDMR Value"
+       depends on MPC8XX_CONS
+       default 0
+
 endmenu