-2020-12-04 Andreas Krebbel <krebbel@linux.ibm.com>
+2021-01-01 Alan Modra <amodra@gmail.com>
- * testsuite/gas/s390/zarch-z10.s: Add tests for risbgz.
- * testsuite/gas/s390/zarch-z10.d: Add regexp for risbgz.
- * testsuite/gas/s390/zarch-zEC12.s: Add tests for risbgnz.
- * testsuite/gas/s390/zarch-zEC12.d: Add regexp for risbgnz.
-
-2020-12-03 Andreas Krebbel <krebbel@linux.ibm.com>
-
- * testsuite/gas/s390/esa-g5.s: Test new extended mnemonics.
- * testsuite/gas/s390/esa-g5.d: Likewise.
- * testsuite/gas/s390/esa-z900.s: Likewise.
- * testsuite/gas/s390/esa-z900.d: Likewise.
- * testsuite/gas/s390/zarch-z900.s: Likewise.
- * testsuite/gas/s390/zarch-z900.d: Likewise.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/attribute-10.d: Updated.
- * testsuite/gas/riscv/march-imply-g.d: New testcase for g.
- * testsuite/gas/riscv/march-imply-unsupported.d: The zicsr and zifencei
- are not supported in the ISA spec v2.2, so don't add and output them.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (riscv_subset_supports): Updated.
- * testsuite/gas/riscv/march-imply-i2p0.d: New testcase. Need to
- add the implicit zicsr and zifencei when i's version less than 2.1.
- * testsuite/gas/riscv/march-imply-i2p1.d: New testcase.
- * testsuite/gas/riscv/march-imply-d.d: Likewise.
- * testsuite/gas/riscv/march-imply-f.d: Likewise.
- * testsuite/gas/riscv/march-imply-q.d: Likewise.
- * testsuite/gas/riscv/march-fail-rv32iq.l: Updated.
- * testsuite/gas/riscv/march-fail-rv32id.d: Removed.
- * testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv64iq.d: Likewise.
- * testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (riscv_get_default_ext_version):
- Change the version type from unsigned to int.
- (riscv_set_arch): Use as_bad rather than as_fatal to
- report more errors.
- * testsuite/gas/riscv/attribute-02.d: Updated since x must be
- set with versions.
- * testsuite/gas/riscv/attribute-03.d: Likewise.
- * testsuite/gas/riscv/march-ok-two-nse.d: Likewise.
- * testsuite/gas/riscv/attribute-09.d: zicsr wasn't supported
- in the spec 2.2, so choose the newer spec.
- * testsuite/gas/riscv/march-fail-base-01.l: Updated since as_bad.
- * testsuite/gas/riscv/march-fail-base-02.l: Likewise.
- * testsuite/gas/riscv/march-fail-order-std.l: Likewise.
- * testsuite/gas/riscv/march-fail-order-x.l: Likewise.
- * testsuite/gas/riscv/march-fail-order-z.l: Likewise.
- * testsuite/gas/riscv/march-fail-porder.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
- * testsuite/gas/riscv/march-fail-single-char.l: Likewise.
- * testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
- * testsuite/gas/riscv/march-fail-unknown.l: Likewise.
- * testsuite/gas/riscv/march-fail-uppercase.l: Likewise.
- * testsuite/gas/riscv/march-fail-version.l: Likewise.
- * testsuite/gas/riscv/march-fail-isa-spec.d: Likewise.
- * testsuite/gas/riscv/march-fail-isa-spec.l: Likewise.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/march-fail-order-z.d: New testcase, check
- orders of prefixed z extensions.
- * testsuite/gas/riscv/march-fail-order-z.l: Likewise.
- * testsuite/gas/riscv/march-fail-single-char-h.d: New testcase.
- * testsuite/gas/riscv/march-fail-single-char.l: Updated.
- * testsuite/gas/riscv/march-fail-unknown-h.d: New testcase.
- * testsuite/gas/riscv/march-fail-unknown.l: Updated.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/march-fail-uppercase-base.d: Updated.
- * testsuite/gas/riscv/march-fail-uppercase.l: Updated.
- * testsuite/gas/riscv/march-fail-uppercase-x.d: New testcase.
-
-2020-12-01 Nelson Chu <nelson.chu@sifive.com>
-
- (These are new testcases that cover more cases)
- * testsuite/gas/riscv/march-fail-base-01.d: The first extension must
- be e, i or g.
- * testsuite/gas/riscv/march-fail-base-01.l: Likewise.
- * testsuite/gas/riscv/march-fail-base-02.d: rv64e is an invalid base ISA.
- * testsuite/gas/riscv/march-fail-base-02.l: Likewise.
- * testsuite/gas/riscv/march-fail-order-std.d: Check orders of standard
- extensions.
- * testsuite/gas/riscv/march-fail-order-std.l: Likewise.
- * testsuite/gas/riscv/march-fail-order-x.d: Check orders of prefixed
- x extensions.
- * testsuite/gas/riscv/march-fail-order-x.l: Likewise.
- * testsuite/gas/riscv/march-fail-porder-x-std.d: Check orders when
- standard and prefixed extensions are set at the same time.
- * testsuite/gas/riscv/march-fail-porder-x-z.d: Likewise.
- * testsuite/gas/riscv/march-fail-porder-z-std.d: Likewise.
- * testsuite/gas/riscv/march-fail-porder.l: Likewise.
- * testsuite/gas/riscv/march-fail-single-char-s.d: Only standard
- extensions can use single char.
- * testsuite/gas/riscv/march-fail-single-char-x.d: Likewise.
- * testsuite/gas/riscv/march-fail-single-char-z.d: Likewise.
- * testsuite/gas/riscv/march-fail-single-char.l: Likewise.
- * testsuite/gas/riscv/march-fail-unknown-s.d: All extensions
- should be known, except the non-standard x extensions.
- * testsuite/gas/riscv/march-fail-unknown-std.d: Likewise.
- * testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
- * testsuite/gas/riscv/march-fail-unknown-z.d: Likewise.
- * testsuite/gas/riscv/march-fail-unknown.l: Likewise.
- * testsuite/gas/riscv/march-fail-uppercase-base.d: Do not
- allow any uppercase in the arch string.
- * testsuite/gas/riscv/march-fail-uppercase-std.d: Likewise.
- * testsuite/gas/riscv/march-fail-uppercase-z.d: Likewise.
- * testsuite/gas/riscv/march-fail-uppercase.l: Likewise.
- * testsuite/gas/riscv/march-fail-version-x.d: Failed to set versions.
- * testsuite/gas/riscv/march-fail-version-z.d: Likewise.
- * testsuite/gas/riscv/march-fail-version.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32ef.l: Updated.
- * testsuite/gas/riscv/march-fail-rv32id.d: Need f-ext.
- * testsuite/gas/riscv/march-fail-rv32iq.d: Should be rv64.
- * testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv64iq.d: Need d-ext and f-ext.
- * testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
-
- (The following testcases are removed and covered by new testcases)
- * testsuite/gas/riscv/march-fail-rv32i.d: march-fail-uppercase-base.
- * testsuite/gas/riscv/march-fail-rv32i.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32iam.d: march-fail-order-std.
- * testsuite/gas/riscv/march-fail-rv32iam.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32ic.d: march-fail-uppercase-std.
- * testsuite/gas/riscv/march-fail-rv32ic.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32icx2p.d: march-fail-version-x.
- * testsuite/gas/riscv/march-fail-rv32icx2p.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv32imc.d: march-fail-order-std.
- * testsuite/gas/riscv/march-fail-rv32imc.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv64I.d: march-fail-uppercase-std.
- * testsuite/gas/riscv/march-fail-rv64I.l: Likewise.
- * testsuite/gas/riscv/march-fail-rv64e.d: march-fail-base-02.
- * testsuite/gas/riscv/march-fail-rv64e.l: Likewise.
- * testsuite/gas/riscv/march-fail-s-with-version.d: march-fail-unknown-s.
- * testsuite/gas/riscv/march-fail-s-with-version.l: Likewise.
- * testsuite/gas/riscv/march-fail-s.d: march-fail-unknown-s.
- * testsuite/gas/riscv/march-fail-s.l: Likewise.
- * testsuite/gas/riscv/march-fail-sx.d: march-fail-unknown-s.
- * testsuite/gas/riscv/march-fail-sx.l: Likewise.
-
-2002-11-29 Borislav Petkov <bp@suse.de>
-
- * testsuite/gas/i386/branch.d: Add new branch insns test.
- * testsuite/gas/i386/branch.s: Likewise.
- * testsuite/gas/i386/i386.exp: Insert the new branch test.
- * testsuite/gas/i386/x86-64-branch.d: Test for branch hints insns.
- * testsuite/gas/i386/x86-64-branch.s: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
-
-2020-11-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
-
- * testsuite/gas/elf/elf.exp: Run new tests.
- * testsuite/gas/elf/section25.d: New test.
- * testsuite/gas/elf/section25.s: New test.
- * testsuite/gas/elf/section26.d: New test.
- * testsuite/gas/elf/section26.s: New test.
-
-2020-11-25 Alan Modra <amodra@gmail.com>
-
- * output-file.c (output_file_close): Remove "can't close" from
- error message.
- * testsuite/gas/mips/reginfo-2.l: Update expected output.
-
-2020-11-04 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpus): Add Cortex-A78C.
- * doc/c-aarch64.texi: Document -mcpu=cortex-a78c.
- * doc/NEWS: Update news.
-
-2020-11-19 Jozef Lawrynowicz <jozef.l@mittosystems.com>
-
- * testsuite/gas/elf/section22.d: Allow FreeBSD OSABI in readelf
- output.
- * testsuite/gas/elf/section23a.d: Likewise.
- * testsuite/gas/elf/section24a.d: Likewise.
-
-2020-11-18 Alan Modra <amodra@gmail.com>
-
- * doc/as.texi (.nop): Document optional size arg.
- * dwarf2dbg.c (dwarf2_gen_line_info_1): Only check SEC_ALLOC
- when ELF. Warn whenever dwarf line number information is ignored.
- * frags.c (frag_offset_ignore_align_p): New function.
- * frags.h (frag_offset_ignore_align_p): Declare.
- * read.c (s_nop): Extend to support optional size arg.
- * testsuite/gas/elf/dwarf2-20.d: Expect warnings, and exact range.
- * testsuite/gas/elf/dwarf2-20.s: Emit 16 bytes worth of nops.
- * testsuite/gas/m68hc11/indexed12.d: Expect warnings.
-
-2020-11-18 Jozef Lawrynowicz <jozef.l@mittosystems.com>
- H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Announce SHF_GNU_RETAIN support.
- * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
- between section declarations.
- (obj_elf_parse_section_letters): Handle 'R' flag.
- Handle numeric flag values within the SHF_MASKOS range.
- (obj_elf_section): Validate SHF_GNU_RETAIN usage.
- * doc/as.texi: Document 'R' flag to .section directive.
- * testsuite/gas/elf/elf.exp: Run new tests.
- * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
- * testsuite/gas/elf/section10.s: Likewise.
- * testsuite/gas/elf/section22.d: New test.
- * testsuite/gas/elf/section22.s: New test.
- * testsuite/gas/elf/section23.s: New test.
- * testsuite/gas/elf/section23a.d: New test.
- * testsuite/gas/elf/section23b.d: New test.
- * testsuite/gas/elf/section23b.err: New test.
- * testsuite/gas/elf/section24.s: New test.
- * testsuite/gas/elf/section24a.d: New test.
- * testsuite/gas/elf/section24b.d: New test.
-
-2020-11-13 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update news.
- * config/tc-aarch64.c: Add option +pauth to -march.
- * doc/c-aarch64.texi: Update docs.
- * testsuite/gas/aarch64/pac-feat.d: New test.
- * testsuite/gas/aarch64/pac-feat.s: New test.
-
-2020-11-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update news.
- * config/tc-aarch64.c: New feature flag +flagm.
- * doc/c-aarch64.texi: Update docs.
- * testsuite/gas/aarch64/flagm.d: New test.
- * testsuite/gas/aarch64/flagm.s: New test.
-
-2020-11-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add Cortex-A78C.
- * doc/c-arm.texi: Document -mcpu=cortex-a78c.
- * testsuite/gas/arm/cpu-cortex-a78c.d: New test.
-
-2020-11-14 Borislav Petkov <bp@suse.de>
-
- * testsuite/gas/i386/x86-64-segovr.d: Adjust regexes.
- * testsuite/gas/i386/x86-64-nops.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-1.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-1-g64.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-1-core2.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-1-k8.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-2.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-3.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-4.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-4-core2.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-4-k8.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-5.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-5-k8.d: Likewise.
- * testsuite/gas/i386/x86-64-nops-7.d: Likewise.
- * testsuite/gas/i386/x86-64-nop-1.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1a.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1b.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1c.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1d.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1g.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-2c.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-6.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-7.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-8.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-1.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-2.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-3.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-4.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops-5.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-nops.d:: Likewise.
-
-2020-11-12 Jozef Lawrynowicz <jozef.l@mittosystems.com>
-
- * config/tc-msp430.c (OPTION_MOVE_DATA): Define.
- (md_parse_option): Ignore OPTION_MOVE_DATA.
- (md_longopts): Handle -md option.
- * testsuite/gas/msp430/msp430.exp: Run new test.
- * testsuite/gas/msp430/empty.s: New test.
- * testsuite/gas/msp430/ignore-md.d: New test.
-
-2020-11-12 Nick Clifton <nickc@redhat.com>
-
- PR 26850
- * dwarf2dbg.c (dwarf2_gen_line_info_1): Do not record lines in
- sections that are not executable or not loadable.
- (out_debug_line): Move warning message into dwarf2_gen_line_info_1.
- * testsuite/gas/elf/dwarf2-20.s: New test.
- * testsuite/gas/elf/dwarf2-20.d: New test driver.
- * testsuite/gas/elf/elf.exp: Run the new test.
- * testsuite/gas/elf/warn-2.s: Use the .nop directive.
-
-2020-11-11 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/ls64.s: Update test.
-
-2020-11-09 Denys Zagorui <dzagorui@cisco.com>
-
- * config/obj-elf (obj_elf_init_stab_section): Improve
- reproducibility for stabs debugging data format
-
-2020-11-09 Spencer E. Olson <olsonse@umich.edu>
-
- * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit
- detect).
- * testsuite/gas/pru/misc.d: Update expected disassembly.
-
-2020-11-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c: Fix comment.
- * testsuite/gas/aarch64/ls64.d: New test.
- * testsuite/gas/aarch64/ls64.s: Test for ACCDATA_EL1 register.
-
-2020-11-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c (process_omitted_operand): Add AARCH64_OPND_Rt_LS64.
- (parse_operands): Parse Rt range for AARCH64_OPND_Rt_LS64.
- * testsuite/gas/aarch64/ls64-invalid.l: Update test.
- * testsuite/gas/aarch64/ls64-invalid.s: Update test.
- * testsuite/gas/aarch64/ls64.s: Update test.
-
-2020-11-09 Andreas Schwab <schwab@linux-m68k.org>
-
- * Makefile.am (development.exp): Fix regexp.
- * Makefile.in: Regenerate.
-
-2020-11-09 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (explicit_mabi): New boolean to indicate if
- the -mabi= option is explictly set.
- (md_parse_option): Set explicit_mabi to TRUE if -mabi is set.
- (riscv_set_abi_by_arch): New function. If the -mabi option isn't
- set, then we set the abi according to the architecture string.
- Otherwise, check if there are conflicts between architecture
- and abi setting.
- (riscv_after_parse_args): Move the abi setting to md_assemble nad
- riscv_elf_final_processing.
- (md_assemble): Call the riscv_set_abi_by_arch when we set the
- start_assemble to TRUE.
- (riscv_elf_final_processing): Likewise, in case the file without
- any instruction.
- * testsuite/gas/riscv/mabi-attr-01.s: New testcase.
- * testsuite/gas/riscv/mabi-attr-02.s: Likewise.
- * testsuite/gas/riscv/mabi-attr-03.s: Likewise.
- * testsuite/gas/riscv/mabi-fail-01.d: Likewise.
- * testsuite/gas/riscv/mabi-fail-01.l: Likewise.
- * testsuite/gas/riscv/mabi-fail-02.d: Likewise.
- * testsuite/gas/riscv/mabi-fail-02.l: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-01a.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-01b.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-02a.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-02b.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-03a.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-attr-03b.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-march-01.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-march-02.d: Likewise.
- * testsuite/gas/riscv/mabi-noabi-march-03.d: Likewise.
-
-2020-11-04 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/armv8-ras-1_1-invalid.d: New test.
- * testsuite/gas/aarch64/armv8-ras-1_1-invalid.l: New test.
- * testsuite/gas/aarch64/armv8-ras-1_1-invalid.s: New test.
- * testsuite/gas/aarch64/armv8-ras-1_1.d: New test.
- * testsuite/gas/aarch64/armv8-ras-1_1.s: New test.
- * testsuite/gas/aarch64/illegal-ras-1.d: Remove.
- * testsuite/gas/aarch64/illegal-ras-1.l: Remove.
- * testsuite/gas/aarch64/illegal-ras-1.s: Remove.
- * testsuite/gas/aarch64/illegal-sysreg-2.d: Remove.
- * testsuite/gas/aarch64/illegal-sysreg-2.l: Remove.
-
-2020-11-03 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update docs.
- * config/tc-aarch64.c: Add +ls64 feature to -march flags set.
- * testsuite/gas/aarch64/ls64-invalid.d: New test.
- * testsuite/gas/aarch64/ls64-invalid.l: New test.
- * testsuite/gas/aarch64/ls64-invalid.s: New test.
- * testsuite/gas/aarch64/ls64.s: New test.
-
-2020-11-03 Christian Eggers <ceggers@gmx.de>
-
- * config/obj-elf (elf_frob_symbol): Fix symbol value calculation
- for versioned symbol aliases.
-
-2020-10-30 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26703
- * config/tc-i386.c (output_insn): Update for
- GNU_PROPERTY_X86_ISA_1_BASELINE.
- * testsuite/gas/i386/property-1.d: Updated.
- * testsuite/gas/i386/property-2.d: Likewise.
- * testsuite/gas/i386/property-3.d: Likewise.
- * testsuite/gas/i386/property-4.d: Likewise.
- * testsuite/gas/i386/property-5.d: Likewise.
- * testsuite/gas/i386/property-6.d: Likewise.
- * testsuite/gas/i386/property-11.d: Likewise.
- * testsuite/gas/i386/property-12.d: Likewise.
- * testsuite/gas/i386/x86-64-property-1.d: Likewise.
- * testsuite/gas/i386/x86-64-property-2.d: Likewise.
- * testsuite/gas/i386/x86-64-property-3.d: Likewise.
- * testsuite/gas/i386/x86-64-property-4.d: Likewise.
- * testsuite/gas/i386/x86-64-property-5.d: Likewise.
- * testsuite/gas/i386/x86-64-property-6.d: Likewise.
- * testsuite/gas/i386/x86-64-property-11.d: Likewise.
- * testsuite/gas/i386/x86-64-property-12.d: Likewise.
-
-2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update docs.
- * testsuite/gas/aarch64/system-5.d: Update test with WFIT insn.
- * testsuite/gas/aarch64/system-5.s: Update test with WFIT insn.
-
-2020-10-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c (parse_operands): Check for C0-C15 value of DSB
- immediate string operand.
- * testsuite/gas/aarch64/system-4.d: Update test.
- * testsuite/gas/aarch64/system-4.s: Update test.
-
-2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update docs.
- * config/tc-aarch64.c (parse_csr_operand): New operand parser.
- (parse_operands): Call to CSR operand parser.
- * testsuite/gas/aarch64/csre_csr-invalid.d: New test.
- * testsuite/gas/aarch64/csre_csr-invalid.l: New test.
- * testsuite/gas/aarch64/csre_csr-invalid.s: New test.
- * testsuite/gas/aarch64/csre_csr.d: New test.
- * testsuite/gas/aarch64/csre_csr.s: New test.
-
-2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Update docs.
- * testsuite/gas/aarch64/system-5.d: New test.
- * testsuite/gas/aarch64/system-5.s: New test.
-
-2020-10-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26778
- * * dwarf2dbg.c (num_of_auto_assigned): New.
- (allocate_filenum): Increment num_of_auto_assigned.
- (dwarf2_directive_filename): Clear the slots auto-assigned
- before the first .file <NUMBER> directive was seen.
- * testsuite/gas/i386/dwarf4-line-1.d: New file.
- * testsuite/gas/i386/dwarf4-line-1.s: Likewise.
- * testsuite/gas/i386/i386.exp: Run dwarf4-line-1.
-
-2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (dump_literals): Fix the literal dump
- of big vector constant.
-
-2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * testsuite/gas/csky/enhance_dsp.s : Change plsl.u16 to plsl.16.
- * testsuite/gas/csky/enhance_dsp.d : Change plsl.u16 to plsl.16.
-
-2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (md_begin): Add version flag in eflag.
-
-2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (get_operand_value): Add handler for
- OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
- * testsuite/gas/csky/csky_vdsp.d : Fix the disassembling for
- vector register.
-
-2020-10-26 Lili Cui <lili.cui@intel.com>
-
- * testsuite/gas/i386/avx-vnni.d: Change psuedo prefix from
- {vex3} to {vex}
- * testsuite/gas/i386/x86-64-avx-vnni.d: Likewise.
-
-2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Docs update.
- * config/tc-aarch64.c (parse_operands): Add
- AARCH64_OPND_BARRIER_DSB_NXS handler.
- (md_begin): Add content of aarch64_barrier_dsb_nxs_options to
- aarch64_barrier_opt_hsh hash.
- * testsuite/gas/aarch64/system-4-invalid.d: New test.
- * testsuite/gas/aarch64/system-4-invalid.l: New test.
- * testsuite/gas/aarch64/system-4-invalid.s: New test.
- * testsuite/gas/aarch64/system-4.d: New test.
- * testsuite/gas/aarch64/system-4.s: New test.
-
-2020-10-21 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
-
- PR target/26763
- * config/tc-arm.c (parse_address_main): Add new MVE addressing mode
- check.
- * testsuite/gas/arm/mve-vldr-vstr-bad.d: New test.
- * testsuite/gas/arm/mve-vldr-vstr-bad.l: Likewise.
- * testsuite/gas/arm/mve-vldr-vstr-bad.s: Likewise.
-
-2020-10-20 Dr. David Alan Gilbert <dgilbert@redhat.com>
-
- * config/tc-arc.c (emit_insn0): Fix printf format.
-
-2020-10-20 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
-
- * config/tc-i386.c (cpu_arch): Add CPU_ZNVER3_FLAGS flags.
- (i386_align_code): Add PROCESSOR_ZNVER cases.
- * doc/c-i386.texi: Add znver3, snp, invlpgb and tlbsync.
- * gas/i386/i386.exp: Add new znver3 test cases.
- * gas/i386/arch-14-znver3.d: New.
- * gas/i386/arch-14.d: New.
- * gas/i386/arch-14.s: New.
- * gas/i386/invlpgb.d: New.
- * gas/i386/invlpgb64.d: New.
- * gas/i386/invlpgb.s: New.
- * gas/i386/snp.d: New.
- * gas/i386/snp64.d: New.
- * gas/i386/snp.s: New.
- * gas/i386/tlbsync.d: New.
- * gas/i386/tlbsync.s: New.
- * gas/i386/x86-64-arch-4-znver3.d: New.
- * gas/i386/x86-64-arch-4.d: New.
- * gas/i386/x86-64-arch-4.s: New.
-
-2020-10-17 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25878
- PR gas/26740
- * testsuite/gas/i386/dwarf5-line-4.d: New file.
- * testsuite/gas/i386/dwarf5-line-4.s: Likewise.
- * testsuite/gas/i386/i386.exp: Run dwarf5-line-4.
-
-2020-10-17 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25878
- PR gas/26740
- * testsuite/gas/i386/dwarf5-line-3.s: Replace dwarf5-line-2.S
- with dwarf5-line-3.S.
- * testsuite/gas/i386/dwarf5-line-3.d: Updated.
-
-2020-10-17 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25878
- PR gas/26740
- * dwarf2dbg.c (allocate_filename_to_slot): Don't reuse the slot 1
- here.
- (dwarf2_where): Restore as_where.
- (dwarf2_directive_filename): Clear the slot 1 if it was assigned
- to the input file.
- * testsuite/gas/i386/dwarf5-line-2.d: New file.
- * testsuite/gas/i386/dwarf5-line-2.s: Likewise.
- * testsuite/gas/i386/dwarf5-line-3.d: Likewise.
- * testsuite/gas/i386/dwarf5-line-3.s: Likewise.
- * testsuite/gas/i386/i386.exp: Run dwarf5-line-2 and
- dwarf5-line-3.
-
-gas/ChangeLog:
-
-2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Docs update.
- * config/tc-aarch64.c (armv8.7-a): New arch.
- * doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
-
-2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/sysreg-6.d: New test.
- * testsuite/gas/aarch64/sysreg-6.s: New test.
-
-2020-10-16 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25878
- PR gas/26740
- * dwarf2dbg.c (file_entry): Remove auto_assigned.
- (assign_file_to_slot): Remove the auto_assign argument.
- (allocate_filenum): Updated.
- (allocate_filename_to_slot): Reuse the input file entry in the
- file table.
- (dwarf2_where): Replace as_where with as_where_physical.
- * testsuite/gas/i386/dwarf5-line-1.d: New file.
- * testsuite/gas/i386/dwarf5-line-1.s: Likewise.
- * testsuite/gas/i386/i386.exp: Run dwarf5-line-1.
-
-2020-10-16 Lili Cui <lili.cui@intel.com>
-
- * config/tc-i386.c (cpu_flags_match): Move Pseudo Prefix check
- to ...
- (match_template): Here.
- * testsuite/gas/i386/avx-vnni-inval.l: New file.
- * testsuite/gas/i386/avx-vnni-inval.s: Likewise.
- * testsuite/gas/i386/avx-vnni.d: Delete invalid {vex2} test.
- * testsuite/gas/i386/avx-vnni.s: Likewise.
- * testsuite/gas/i386/i386.exp: Add AVX VNNI invalid tests.
- * testsuite/gas/i386/x86-64-avx-vnni-inval.l: New file.
- * testsuite/gas/i386/x86-64-avx-vnni-inval.s: Likewise.
- * testsuite/gas/i386/x86-64-avx-vnni.d: Delete invalid {vex2} test.
- * testsuite/gas/i386/x86-64-avx-vnni.s: Likewise.
-
-2020-10-14 H.J. Lu <hongjiu.lu@intel.com>
- Lili Cui <lili.cui@intel.com>
-
- * NEWS: Add Intel AVX VNNI.
- * config/tc-i386.c (cpu_arch): Add .avx_vnni and noavx_vnni.
- (cpu_flags_match): Support CpuVEX_PREFIX.
- * doc/c-i386.texi: Document .avx_vnni, noavx_vnni and how to
- encode Intel VNNI instructions with VEX prefix.
- * testsuite/gas/i386/avx-vnni.d: New file.
- * testsuite/gas/i386/avx-vnni.s: Likewise.
- * testsuite/gas/i386/x86-64-avx-vnni.d: Likewise.
- * testsuite/gas/i386/x86-64-avx-vnni.s: Likewise.
- * testsuite/gas/i386/i386.exp: Run AVX VNNI tests.
-
-2020-10-14 Lili Cui <lili.cui@intel.com>
-
- * NEWS: Add Intel HRESET.
- * config/tc-i386.c (cpu_arch): Add .hreset.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document .hreset, nohreset.
- * testsuite/gas/i386/i386.exp: Run HRESET tests.
- * testsuite/gas/i386/hreset.d: New file.
- * testsuite/gas/i386/x86-64-hreset.d: Likewise.
- * testsuite/gas/i386/hreset.s: Likewise.
-
-2020-10-14 Lili Cui <lili.cui@intel.com>
-
- * NEWS: Add Intel UINTR.
- * config/tc-i386.c (cpu_arch): Add .uintr.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document .uintr and nouintr.
- * testsuite/gas/i386/i386.exp: Run UINTR tests.
- * testsuite/gas/i386/x86-64-uintr.d: Likewise.
- * testsuite/gas/i386/x86-64-uintr.s: Likewise.
-
-2020-10-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (load_insn_p): Check opcodeprefix == 0 for
- base_opcode == 0xfc7.
- (match_template): Likewise.
- (process_suffix): Check opcodeprefix == PREFIX_0XF2 for CRC32.
- (check_byte_reg): Likewise.
- (output_insn): Don't add the 0xf3 prefix twice for PadLock
- instructions. Don't add prefix from non-VEX/EVEX base_opcode.
-
-2020-10-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_vex_prefix): Replace vexopcode with
- opcodeprefix.
- (build_evex_prefix): Likewise.
- (is_any_vex_encoding): Don't check vexopcode.
- (output_insn): Handle opcodeprefix.
-
-2020-10-09 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26703
- * config/tc-i386.c (xstate): Add xstate_mask.
- (md_assemble): Check i.types[j], instead of i.tm.operand_types[j],
- for xstate. Set xstate_mask, instead of xstate_zmm, for RegMask.
- (output_insn): Update for GNU_PROPERTY_X86_ISA_1_V[234]. Update
- xstate for mask register and VSIB.
- * testsuite/gas/i386/i386.exp: Run more GNU_PROPERTY tests.
- * testsuite/gas/i386/property-1.s: Updated to the current
- GNU_PROPERTY_X86_ISA_1_USED value.
- * testsuite/gas/i386/property-2.s: Only keep cmove.
- * testsuite/gas/i386/property-3.s: Changed to addsubpd.
- * testsuite/gas/i386/property-1.d: Updated.
- * testsuite/gas/i386/property-2.d: Likewise.
- * testsuite/gas/i386/property-3.d: Likewise.
- * testsuite/gas/i386/property-4.d: Likewise.
- * testsuite/gas/i386/property-5.d: Likewise.
- * testsuite/gas/i386/property-6.d: Likewise.
- * testsuite/gas/i386/x86-64-property-1.d: Likewise.
- * testsuite/gas/i386/x86-64-property-2.d: Likewise.
- * testsuite/gas/i386/x86-64-property-3.d: Likewise.
- * testsuite/gas/i386/x86-64-property-4.d: Likewise.
- * testsuite/gas/i386/x86-64-property-5.d: Likewise.
- * testsuite/gas/i386/x86-64-property-6.d: Likewise.
- * testsuite/gas/i386/x86-64-property-7.d: Likewise.
- * testsuite/gas/i386/x86-64-property-8.d: Likewise.
- * testsuite/gas/i386/x86-64-property-9.d: Likewise.
- * testsuite/gas/i386/property-11.d: New file.
- * testsuite/gas/i386/property-11.s: Likewise.
- * testsuite/gas/i386/property-12.d: Likewise.
- * testsuite/gas/i386/property-12.s: Likewise.
- * testsuite/gas/i386/property-13.d: Likewise.
- * testsuite/gas/i386/property-13.s: Likewise.
- * testsuite/gas/i386/x86-64-property-11.d: Likewise.
- * testsuite/gas/i386/x86-64-property-12.d: Likewise.
- * testsuite/gas/i386/x86-64-property-13.d: Likewise.
- * testsuite/gas/i386/x86-64-property-14.d: Likewise.
- * testsuite/gas/i386/x86-64-property-14.s: Likewise.
-
-2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Docs update.
- * testsuite/gas/aarch64/brbe-invalid.d: New test.
- * testsuite/gas/aarch64/brbe-invalid.l: New test.
- * testsuite/gas/aarch64/brbe-invalid.s: New test.
- * testsuite/gas/aarch64/brbe.d: New test.
- * testsuite/gas/aarch64/brbe.s: New test.
-
-2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: Docs update.
- * testsuite/gas/aarch64/csre-invalid.d: New test.
- * testsuite/gas/aarch64/csre-invalid.l: New test.
- * testsuite/gas/aarch64/csre-invalid.s: New test.
- * testsuite/gas/aarch64/csre.d: New test.
- * testsuite/gas/aarch64/csre.s: New test.
-
-2020-10-06 Alex Coplan <alex.coplan@arm.com>
-
- PR 26699
- * config/tc-aarch64.c (asm_barrier_opt): Delete.
- (parse_barrier): Fix bogus type punning.
- * testsuite/gas/aarch64/system.d: Update disassembly.
- * testsuite/gas/aarch64/system.s: Add isb sy test.
-
-2020-10-06 Sergey Belyashav <sergey.belyashov@gmail.com>
-
- PR 26692
- * config/tc-z80.c (md_begin): Ensure that xpressions are empty
- before using them.
- (unify_indexed): Likewise.
- (z80_start_line_hook): Improve hash sign handling when SDCC
- compatibility mode enabled.
- (md_parse_exp_not_indexed): Improve indirect addressing
- detection.
- (md_pseudo_table): Accept hd64 as an alias of z810.
-
-2020-10-06 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/elf/sh-link-zero.s: Don't start directives in
- first column. Don't use numeric labels.
-
-2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-arm.c: Update Cortex-X1 feature flags.
-
-2020-10-05 Kamil Rytarowski <n54@gmx.com>
-
- * configure.tgt (aarch64*-*-netbsd*): Add target.
-
-2020-10-05 Samanta Navarro <ferivoz@riseup.net>
-
- * doc/as.texi: Fix spelling mistakes.
- * doc/c-wasm32.texi: Likewise.
-
-2020-10-05 T.K. Chia <u1049321969@caramail.com>
-
- PR gas/26694
- * NEWS: Updated for i386 lcall and ljmp change.
- * config/tc-i386.c (output_interseg_jump): Allow non-absolute
- segment operand for immediate lcall and ljmp.
- * testsuite/gas/i386/jump.d,
- * testsuite/gas/i386/jump.s,
- * testsuite/gas/i386/jump16.d,
- * testsuite/gas/i386/jump16.e,
- * testsuite/gas/i386/jump16.s: Add tests for non-absolute
- segment operand for immediate ljmp.
-
-2020-10-05 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/26704
- * testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
- sysret.
- * testsuite/gas/i386/noreg64.d: Likewise.
- * testsuite/gas/i386/x86-64-intel64.d: Likewise.
- * testsuite/gas/i386/x86-64-opcode.d: Likewise.
-
-2020-10-05 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/26705
- * testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
- sysretq.
- * testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
- * testsuite/gas/i386/x86-64-suffix.d: Likewise.
-
-2020-10-05 Nick Clifton <nickc@redhat.com>
-
- PR 26253
- * config/obj-elf.c (obj_elf_section): Accept a numeric value for
- the "o" section flag. Interpret it as a section index. Allow an
- index of zero.
- * doc/as.texi: Document the new behaviour.
- * NEWS: Mention the new feature. Tidy entries.
- * testsuite/gas/elf/sh-link-zero.s: New test.
- * testsuite/gas/elf/sh-link-zero.d: New test driver.
- * testsuite/gas/elf/elf.exp: Run the new test.
- * testsuite/gas/elf/section21.l: Updated expected assembler
- output.
-
-2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c: Update Cortex-X1 feature flags.
-
-2020-10-03 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26685
- * config/tc-i386.c (process_suffix): Also check the register
- operand for the address size prefix if the memory operand has
- no real registers.
- * testsuite/gas/i386/enqcmd-16bit.d: New file.
- * testsuite/gas/i386/enqcmd-16bit.s: Likewise.
- * testsuite/gas/i386/movdir-16bit.d: Likewise.
- * testsuite/gas/i386/movdir-16bit.s: Likewise.
- * testsuite/gas/i386/enqcmd.s: Add tests with symbol and DISP.
- * testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
- * testsuite/gas/i386/x86-64-movdir.s: Likewise.
- * testsuite/gas/i386/movdir.s: Add tests with symbol and DISP.
- Remove the .code16 test.
- * testsuite/gas/i386/i386.exp: Run movdir-16bit and enqcmd-16bit.
- * testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
- * testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir.d: Likewise.
- * testsuite/gas/i386/enqcmd-intel.d: Likewise.
- * testsuite/gas/i386/enqcmd.d: Likewise.
- * testsuite/gas/i386/movdir-intel.d: Likewise.
- * testsuite/gas/i386/movdir.d: Likewise.
- * testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir.d: Likewise.
-
-2020-10-02 Nick Clifton <nickc@redhat.com>
-
- * testsuite/gas/arm/mve-vcvtne-it.d: Allow for padding inserted by
- PE based targets.
-
-2020-10-01 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf (elf_pseudo_table): Add attach_to_group.
- (obj_elf_attach_to_group): New function.
- * doc/as.texi: Document the new directive.
- * NEWS: Mention the new feature.
- * testsuite/gas/elf/attach-1.s: New test.
- * testsuite/gas/elf/attach-1.d: New test driver.
- * testsuite/gas/elf/attach-2.s: New test.
- * testsuite/gas/elf/attach-2.d: New test driver.
- * testsuite/gas/elf/attach-err.s: New test.
- * testsuite/gas/elf/attach-err.d: New test driver.
- * testsuite/gas/elf/attach-err.err: New test error output.
- * testsuite/gas/elf/elf.exp: Run the new tests.
-
-2020-09-16 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26685
- * config/tc-i386.c (process_suffix): Check the register operand
- for the address size prefix if the memory operand is symbol(%rip).
- * testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
- addressing.
- * testsuite/gas/i386/x86-64-movdir.s: Likewise.
- * testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
- * testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-movdir.d: Likewise.
-
-2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c: Add Cortex-A78 and Cortex-A78AE cores.
- * doc/c-aarch64.texi: Update docs.
- * NEWS: Update news.
-
-2020-09-30 Alex Coplan <alex.coplan@arm.com>
-
- * NEWS: Mention recent Arm processor support.
-
-2020-09-30 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
- * doc/c-aarch64.texi: Document support for Neoverse N2.
-
-2020-09-30 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c (obj_elf_change_section): Rename variable to
- avoid shadowing warning.
- * symbols.c (symbol_entry_find): Init all symbol_flags fields.
-
-2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-arm.c: Add cortex-a78 and cortex-a78ae cores.
- * doc/c-arm.texi: Update docs.
- * NEWS: Update news.
- * testsuite/gas/arm/cpu-cortex-a78.d: New test.
- * testsuite/gas/arm/cpu-cortex-a78ae.d: New test.
-
-2020-09-29 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * NEWS: TRBE, ETE, ETMv4 and Cortex-X1 news updates.
-
-2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-arm.c: (arm_cpus): Add Cortex-X1.
- * doc/c-arm.texi: Document -mcpu=cortex-x1.
- * testsuite/gas/arm/cpu-cortex-x1.d: New test.
-
-2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/etm-ro-invalid.d: New test.
- * testsuite/gas/aarch64/etm-ro-invalid.l: New test.
- * testsuite/gas/aarch64/etm-ro-invalid.s: New test.
- * testsuite/gas/aarch64/etm-ro.s: New test.
- * testsuite/gas/aarch64/etm-wo-invalid.d: New test.
- * testsuite/gas/aarch64/etm-wo-invalid.l: New test.
- * testsuite/gas/aarch64/etm-wo-invalid.s: New test.
- * testsuite/gas/aarch64/etm-wo.s: New test.
- * testsuite/gas/aarch64/etm.s: New test.
- * testsuite/gas/aarch64/sysreg.d: system register s2_1_c0_c3_0
- disassembled now to trcstatr.
-
-2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c: (aarch64_cpus): Add Cortex-X1.
- * doc/c-aarch64.texi: Document -mcpu=cortex-x1.
-
-2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/ete.d: New test.
- * testsuite/gas/aarch64/ete.s: New test.
-
-2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * testsuite/gas/aarch64/trbe-invalid.d: New test.
- * testsuite/gas/aarch64/trbe-invalid.l: New test.
- * testsuite/gas/aarch64/trbe-invalid.s: New test.
- * testsuite/gas/aarch64/trbe.d: New test.
- * testsuite/gas/aarch64/trbe.s: New test.
-
-2020-09-28 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add FP16 to Neoverse V1.
-
-2020-09-28 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpus): Group Neoverse cores together,
- add missing F16 bit to Neoverse V1.
-
-2020-09-26 Alan Modra <amodra@gmail.com>
-
- * config/tc-csky.c (parse_type_ctrlreg): Don't mask mach_flag
- for csky_get_control_regno.
- (csky_get_reg_val): Likewise when calling csky_get_general_regno.
-
-2020-09-24 Jim Wilson <jimw@sifive.com>
-
- PR 26400
- * config/tc-riscv.c (append_insn): If in absolute section, emit
- error before add_relaxed_insn call.
- * testsuite/gas/riscv/absolute-sec.d: New.
- * testsuite/gas/riscv/absolute-sec.l: New.
- * testsuite/gas/riscv/absolute-sec.s: New.
-
-2020-09-23 Mark Wielaard <mark@klomp.org>
-
- * testsuite/gas/elf/dwarf-5-cu.d: Adjust expected output.
-
-2020-09-24 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add Neoverse V1.
- * doc/c-arm.texi: Document Neoverse V1 support.
-
-2020-09-24 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1.
- * doc/c-aarch64.texi: Document Neoverse V1 support.
-
-2020-09-24 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add Neoverse N2.
- * doc/c-arm.texi: Document -mcpu=neoverse-n2.
-
-2020-09-24 Lili Cui <lili.cui@intel.com>
-
- * NEWS: Add TDX.
- * config/tc-i386.c (cpu_arch): Add .tdx.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document tdx.
- * testsuite/gas/i386/i386.exp: Run tdx tests.
- * testsuite/gas/i386/tdx.d: Likewise.
- * testsuite/gas/i386/tdx.s: Likewise.
- * testsuite/gas/i386/x86-64-tdx.d: Likewise.
- * testsuite/gas/i386/x86-64-tdx.s: Likewise.
-
-2020-09-17 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (parse_type_ctrlreg): Use function
- csky_get_control_regno to operand.
- (csky_get_reg_val): Likewise.
- (is_reg_sp_with_bracket): Use function csky_get_reg_val
- to parse operand.
- (is_reg_sp): Refine.
- (is_oimm_within_range): Fix, report error when operand
- is not constant.
- (parse_type_cpreg): Refine.
- (parse_type_cpcreg): Refine.
- (get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
- (md_assemble): Fix no error reporting somtimes when
- operands number are not fit.
- (csky_addc64): Refine.
- (csky_subc64): Refine.
- (csky_or64): Refine.
- (v1_work_fpu_fo): Refine.
- (v1_work_fpu_read): Refine.
- (v1_work_fpu_writed): Refine.
- (v1_work_fpu_readd): Refine.
- (v2_work_addc): New function, strengthen the operands legality
- check of addc.
- * testsuite/gas/csky/all.d : Use register number format when
- disassemble register name by default.
- * testsuite/gas/csky/cskyv2_all.d : Likewise.
- * testsuite/gas/csky/trust.d: Likewise.
- * testsuite/gas/csky/cskyv2_ck860.d : Fix.
- * testsuite/gas/csky/trust.s : Fix.
-
-2020-09-23 Lili Cui <lili.cui@intel.com>
-
- * NEWS: Add Key Locker.
- * config/tc-i386.c (cpu_arch): Add .kl and .wide_kl.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document kl and wide_kl.
- * testsuite/gas/i386/i386.exp: Run keylocker tests.
- * testsuite/gas/i386/keylocker-intel.d: New test.
- * testsuite/gas/i386/keylocker.d: Likewise.
- * testsuite/gas/i386/keylocker.s: Likewise.
- * testsuite/gas/i386/x86-64-keylocker-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-keylocker.d: Likewise.
- * testsuite/gas/i386/x86-64-keylocker.s: Likewise.
- * testsuite/gas/i386/x86-64-property-10.d: Likewise.
- * testsuite/gas/i386/property-10.d: Likewise.
- * testsuite/gas/i386/property-10.s: Likewise.
-
-2020-09-21 Alan Modra <amodra@gmail.com>
-
- PR 26569
- * config/tc-riscv.c (append_insn): Don't tie off frags at CALL
- relocs.
- (riscv_call): Tie them off after the jalr.
- (md_apply_fix): Zero fx_size of RELAX fixup.
-
-2020-09-018 David Faust <david.faust@oracle.com>
-
- * testsuite/gas/bpf/alu-xbpf.d: New file.
- * testsuite/gas/bpf/alu-xbpf.s: Likewise.
- * testsuite/gas/bpf/alu32-xbpf.d: Likewise.
- * testsuite/gas/bpf/alu32-xbpf.d: Likewise.
- * testuiste/gas/bpf/bpf.exp: Run new tests.
-
-2020-09-18 Tucker <tuckkern+sourceware@gmail.com>
-
- PR 26556
- * read.c (bss_alloc): Convert size parameter from octets to
- bytes.
-
-2020-09-17 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/i386/i386.exp: Return early if not x86.
-
-2020-09-16 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c (obj_elf_visibility, elf_frob_symbol): Adjust
- elf_symbol_from invocation.
- * config/tc-aarch64.c (s_variant_pcs): Likewise.
- * config/tc-m68hc11.c (s_m68hc11_mark_symbol): Likewise.
- * config/tc-ppc.c (ppc_elf_localentry, ppc_force_relocation),
- (ppc_fix_adjustable): Likewise.
- * config/tc-xgate.c (xgate_frob_symbol): Likewise.
-
-2020-09-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/cfi/reloc-pe-i386.d: Updated.
- * testsuite/gas/i386/x86-64-w64-pcrel.d: Likewise.
-
-2020-09-15 Alan Modra <amodra@gmail.com>
-
- PR 26610
- * config/tc-arm.c (move_or_literal_pool): Correct extraction of
- bignum. Use unsigned "v"
- (is_double_a_single): Make "v" and "mantissa" unsigned. Formatting.
- (double_to_single): Likewise.
-
-2020-09-15 Nick Clifton <nickc@redhat.com>
-
- * read.c (s_nop): Preserve the input_line_pointer around the call
- to md_assemble.
- * config/tc-s12z.c (md_assemble): Revert previous delta.
-
-2020-09-15 David Faust <david.faust@oracle.com>
-
- * config/tc-bpf.h (md_single_noop_insn): Use 'ja 0' for no-op.
-
-2020-09-14 Nick Clifton <nickc@redhat.com>
-
- * read.c (s_nop): New function. Handles the .nop directive.
- (potable): Add entry for "nop".
- (s_nops): Code tidy.
- * read.h (s_nop): Add prototype.
- * config/tc-bpf.h (md_single_noop_insn): Define.
- * config/tc-mmix.h (md_single_noop_insn): Define.
- * config/tc-or1k.h (md_single_noop_insn): Define.
- * config/tc-ia64.h (md_single_noop_insn): Define.
- * config/tc-s12z.c (md_assemble): Preserve the input line pointer,
- rather than corrupting it.
- * write.c (relax_segment): Update error message regarding
- non-absolute values passed to .fill and .nops.
- * NEWS: Mention the new directive.
- * doc/as.texi: Document the new directive.
- * doc/internals.texi: Document the new internal macros used to
- implement the new directive.
- * testsuite/gas/all/nop.s: New test.
- * testsuite/gas/all/nop.d: New test control file.
- * testsuite/gas/all/gas.exp: Run the new test.
- * testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
- * testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
- control file.
- * testsuite/gas/elf/elf.exp: Run the new test.
- * testsuite/gas/i386/space1.l: Adjust expected output.
-
-2020-09-07 Mark Wielaard <mark@klomp.org>
-
- * as.texi (-g): Explicitly mention when .debug_info and .debug_line
- are generated for the DWARF format.
- (Loc): Add that it is an error to both use a .loc directive and
- generate a .debug_line yourself.
- * dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable.
- (dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE.
- (dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting
- an error. Only create .debug_line if it is empty (or doesn't exist).
- * testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing
- an elf target.
- * testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
-
-2020-09-10 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (md_begin): Enable extend lrw by default for
- CK802, CK803 and CK860.
-
-2020-09-10 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (struct csky_cpu_info): Add new members
- isa_flag, features and ver.
- (struct csky_cpu_feature): New.
- (struct csky_cpu_version): New.
- (CSKY_FEATURE_MAX): Define.
- (CSKY_CPU_REVERISON_MAX): Define.
- (FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP,
- FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD):
- Define, each standard one collection of instructions.
- (CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e,
- CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v,
- CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt,
- CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv,
- CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d,
- CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft,
- CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv,
- CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv,
- CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define,
- the features combination used by cpu.
- (CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0,
- CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0,
- CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3):
- Define, version information used by cpu.
- (csky_cpus): Refine, and add CK804, CK805 and CK800.
- (parse_cpu): Refine.
- (parse_arch): Refine.
- (md_show_usage): Refine.
- (md_begin): Refine.
-
-2020-09-09 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_assemble): Emit prefix insn by parts when
- valueT is smaller than 64 bits.
-
-2020-09-07 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (CSKYV2_ISA_DSP): CSKY_ISA_DSPE60.
- (CSKY_ISA_860): Likewise.
-
-2020-09-07 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (float_abi): New.
- (md_longopts): Add mfloat-abi.
- (struct sky_option_value_table): New.
- (csky_float_abis): New, the possible values for -mfloat-abi.
- (parse_float_abi): New funtion.
- (md_show_usage): Show help information for -mfloat-abi.
- (set_csky_attribute): Store float-abi value.
-
-2020-09-07 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (float_work_fpuv3_fmovi): New function,
- helper function to encode fpuv3 fmovi instructions.
- (float_work_fpuv3_fstore): New function.
- (struct literal): Add new member 'offset'.
- (csky_cpus): New cpu CK860f.
- (enter_literal): Return literal pool pointer instead of offset.
- (parse_rt): Adjust the change of enter_literal.
- (parse_rtf): Likewise.
- (v1_work_lrw): Likewise.
- (v1_work_jbsr): Likewise.
- (v2_work_lrw): Likewise.
- (v2_work_jbsr): Likewise.
- (v2_work_jsri): Likewise.
- (vdsp_work_vlrw): Likewise.
- (is_freglist_legal): Add handler for FPUV3.
- (parse_type_freg): Likewise.
- (is_imm_within_range): Set e.X_add_number if it is a signed and
- negtive number.
- (get_operand_value): Add handler for OPRND_TYPE_IMM9b,
- OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI
- and OPRND_TYPE_DFLOAT_FMOVI.
- (float_to_half): Convert float number to harf float.
- * testsuite/gas/csky/case-fpuv3-ck860f/ : New folder containing
- the test cases for FPUV3, they are divided by instruction
- operands format and both have legal cases and illegal cases.
-
-2020-09-08 Jozef Lawrynowicz <jozef.l@mittosystems.com>
- Kuan-Lin Chen <kuanlinchentw@gmail.com>
-
- * config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
- (msp430_md_end): Call msp430_insert_uleb128_fixes.
-
-2020-09-08 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpus): Add Cortex-R82.
- * doc/c-aarch64.texi: Document -mcpu=cortex-r82.
-
-2020-09-08 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
- validation function.
- (parse_sys_ins_reg): Likewise.
- (print_operands): Pass CPU features to aarch64_print_operand().
- * testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
- * testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
- * testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
- * testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
- * testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
- * testsuite/gas/aarch64/v8-r-sysregs.d: New test.
- * testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
-
-2020-09-08 Alex Coplan <alex.coplan@arm.com>
-
- * testsuite/gas/aarch64/dfb.d: New test.
- * testsuite/gas/aarch64/dfb.s: Input.
-
-2020-09-08 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (aarch64_archs): Add armv8-r.
- * doc/c-aarch64.texi: Document -march=armv8-r.
-
-2020-09-07 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (add_line_strp): New function.
- (out_dir_and_file_list): Take line_seg and sizeof_offset as
- arguments, Use DW_FORM_line_strp for dir and file. Call
- add_line_strp and set symbol offset for DWARF2_LINE_VERSION 5.
- (out_debug_line): Call out_dir_and_file_list with line_seg and
- sizeof_offset.
- * testsuite/gas/elf/dwarf-5-file0.d: Expect indirect line
- strings.
-
-2020-09-07 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (DWARF2_RNGLISTS_VERSION): New constant.
- (out_debug_ranges): Add ranges_sym argument and set it.
- (out_debug_rnglists): New function.
- (out_debug_info): Change ranges_seg argument to ranges_sym
- and use it to set DW_AT_ranges value.
- (dwarf2_finish): Remove ranges_seg, add ranges_sym. For
- DWARF2_VERSION 5 call out_debug_rnglists.
-
-2020-09-07 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (dwarf2_directive_filename): Initialize with_md5 to
- FALSE.
- * testsuite/gas/elf/dwarf-5-file0.s: Add a random bignum.
-
-2020-09-01 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_sec_offset for DWARF
- version 4 or higher.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * expr.c (add_to_result, subtract_from_result): Use unsigned
- addition and subtraction.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-z80.c (is_overflow): Avoid too large shift.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-sparc.c (in_signed_range): Use an unsigned type for
- sign mask.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-nios2.c (md_apply_fix): Avoid too large shift.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-mips.c (load_register): Avoid too large shift.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-d30v.c (parallel_ok): Use 1UL for left shift expression.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/rx-parse.y (rx_intop): Avoid too large shifts.
- (rx_intop, rx_uintop, rx_disp3op, rx_disp5op, displacement),
- (rtsd_immediate): Use correctly typed unsigned variables.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/obj-macho.c (obj_mach_o_zerofill): Correct type of
- constant shifted left.
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/bfin-lex.l: Use an unsigned type for "value".
-
-2020-09-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-pdp11.c (md_number_to_chars): Condition nbytes=8 code
- on BFD64.
-
-2020-09-02 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (csky_cpus): Add ck803r3.
- (CSKY_ISA_803R3): Define.
- (CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
-
-2020-09-02 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * testsuite/gas/csky/cskyv2_dsp.d : Fix Encode of mulsws.
-
-2020-09-02 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (struct literal): New member bignum.
- (dump_literals): Handle big constant.
- (enter_literal): Likewise.
- (parse_type_freg): Handle vector register.
-
-2020-09-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/as.texi: Document the .tls_common directive.
-
-2020-09-01 Alan Modra <amodra@gmail.com>
-
- PR 26420
- PR 26421
- PR 26425
- PR 26427
- * config/tc-arm.c (struct arm_it): Make size, size_req, cond and
- uncond_value unsigned.
- (parse_vfp_reg_list): Make setmask unsigned, vpr_str_len size_t.
- (parse_big_immediate): Cast generic_bignum elements to unsigned.
- (encode_thumb32_immediate): Shift left 0xffU.
- (double_to_single): Make sign unsigned. Tidy.
- (move_or_literal_pool): Cast LITTLE_NUM elements to uint64_t or
- valueT.
- (vfp_or_neon_is_neon): Adjust inst.uncond_value expression.
- (md_assemble): Likewise.
- (handle_pred_state): Make cond unsigned.
- (thumb32_negate_data_op): Make variables unsigned.
- (md_apply_fix): Make value and newval unsigned, adjust uses.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26510
- * config/tc-z8k.c (buffer): Use unsigned char.
- (apply_fix): Use unsigned char* pointers.
- (build_bytes): Likewise and mask nibbles when packing.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26503
- * config/tc-v850.c (parse_register_list): Shift 1u left.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26502
- * config/tc-tic6x.c (md_apply_fix): Use unsigned variables.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26497
- * config/tc-sh.c (assemble_ppi): Use unsigned variables.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26495
- * config/tc-score.c (s3_apply_fix): Use unsigned variables.
- * config/tc-score7.c (s7_apply_fix): Likewise.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26480
- * config/tc-nios2.c (nios2_parse_reglist): Shift 1UL left.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26479
- * config/tc-nios2.c (md_chars_to_number): Cast buf[i] before shifting.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26472
- PR 26473
- PR 26474
- * config/tc-mips.c (operand_reg_mask): Shift 1u left.
- (load_register): Shift 0xffffU left.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26471
- * config/tc-metag.c (md_chars_to_number): Make retval unsigned.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26468
- * config/tc-mep.c (md_convert_frag): Use uint32_t for addend and
- other variables.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26493
- * config/tc-riscv.c (riscv_ip): Cast X_add_number passed to
- VALID_* macros to unsigned.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- * config/tc-crx.c: Formatting.
- (CRX_PRINT): Wrap params in parentheses. Remove parens from uses
- throughout file.
- (reset_vars, get_register, get_copregister, get_optype, get_opbits),
- (get_opflags, get_number_of_operands, parse_operand, gettrap),
- (handle_LoadStor, getconstant, check_range, getreg_image),
- (parse_operands, parse_insn, print_operand, print_constant),
- (exponent2scale, mask_reg, process_label_constant, set_operand),
- (assemble_insn, print_insn): Delete unnecessary forward declaration.
- (print_insn): Make static.
- (print_constant): Make "constant" unsigned.
- (assemble_insn): Tidy REVERSE_MATCH index calc.
- * expr.c (generic_bignum_to_int32): Cast elements to valueT.
-
-2020-08-31 Alan Modra <amodra@gmail.com>
-
- PR 26509
- * config/tc-z80.c (is_overflow): Use 1UL in mask shift expression.
-
-2020-08-30 Alan Modra <amodra@gmail.com>
-
- * config/tc-tic4x.c (tic4x_gen_to_words): Rewrite mantissa
- overflow test without UB. Avoid other UB shifts by making them
- unsigned.
-
-2020-08-31 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (csky_error_state): New member 'arg_int'.
- (SET_ERROR_NUMBER): Rename to SET_ERROR_STRING.
- (SET_ERROR_INTEGER): New.
- (err_formats): Add error format for ERROR_FREG_OVER_RANGE and
- ERROR_VREG_OVER_RANGE.
- (csky_show_error): Pass an integer argument for some error
- numbers.
- (parse_exp): Call SET_ERROR_STRING instead of SET_ERROR_NUMBER.
- (parse_rt): Likewise.
- (parse_type_ctrlreg): Likewise.
- (csky_get_reg_val): Likewise.
- (is_reglist_legal): Likewise.
- (is_freglist_legal): Likewise.
- (is_reglist_dash_comma_legal): Likewise.
- (is_reg_lshift_illegal): Likewise.
- (is_psr_bit): Likewise.
- (parse_type_cpreg): Likewise.
- (parse_type_cpcreg): Likewise.
- (parse_type_areg): Likewise.
- (parse_type_freg): Likewise.
- (parse_ldst_imm): Likewise and call SET_ERROR_INTEGER.
- (get_operand_value): Likewise.
- (parse_operands_op): Likewise and call is_imm_within_range,
- is_imm_within_range_ext and is_oimm_within_range.
- (md_assemble): Likewise.
- (is_imm_within_range): New.
- (is_imm_within_range_ext): Rename from is_imm_over_range.
- (is_oimm_within_range): Rename from is_oimm_over_range.
- (v2_work_add_sub): Call SET_ERROR_INTEGER.
- (csky_rolc): call is_imm_within_range instead of
- is_imm_over_range.
-
-2020-08-31 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (md_begin): Add warning when -mdsp and
- -mcpu=ck803ern are both added.
- (parse_ldst_imm): Fix error message.
-
-2020-08-30 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/cr16/cbitb_test.d: Update expected output.
- * testsuite/gas/cr16/cbitw_test.d: Likewise.
- * testsuite/gas/cr16/sbitb_test.d: Likewise.
- * testsuite/gas/cr16/sbitw_test.d: Likewise.
- * testsuite/gas/cr16/storb_test.d: Likewise.
- * testsuite/gas/cr16/storw_test.d: Likewise.
- * testsuite/gas/cr16/tbitb_test.d: Likewise.
- * testsuite/gas/cr16/tbitw_test.d: Likewise.
-
-2020-08-30 Alan Modra <amodra@gmail.com>
-
- PR 26437
- PR 26438
- * config/tc-cr16.c: Include limits.h, formatting.
- (CR16_PRINT): Wrap params in parentheses. Remove parens from uses
- throughout file.
- (getconstant): Handle zero nbits.
- (print_operand): Use unsigned variables. Simplify handling of
- index regs.
- (check_range): Use int32_t variables. Correct range checks.
-
-2020-08-29 Alan Modra <amodra@gmail.com>
-
- PR 26481
- * config/tc-pj.c (md_assemble): Don't loop past end of
- opcode->arg array.
-
-2020-08-28 Alan Modra <amodra@gmail.com>
-
- PR 26460
- * config/tc-ia64.c (parse_operands): Don't access past end of
- idesc->operands.
-
-2020-08-26 Mark Wielaard <mark@klomp.org>
-
- * as.c (parse_args): Handle bad -gdwarf options.
-
-2020-08-28 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (md_begin): Set attributes.
- (isa_flag): Change type to unsigned 64 bits.
- (struct csky_cpu_info): Likewise.
- (struct csky_macro_info): Likewise.
- (set_csky_attribute): New.
- * testsuite/gas/csky/802j.d: Ignore .csky.attributes section.
- * testsuite/gas/csky/all.d: Likewise.
- * testsuite/gas/csky/bsr1.d: Likewise.
- * testsuite/gas/csky/csky_vdsp.d: Likewise.
- * testsuite/gas/csky/cskyv2_all.d: Likewise.
- * testsuite/gas/csky/cskyv2_ck803r2.d: Likewise.
- * testsuite/gas/csky/cskyv2_ck860.d: Likewise.
- * testsuite/gas/csky/cskyv2_dsp.d: Likewise.
- * testsuite/gas/csky/cskyv2_elrw.d: Likewise.
- * testsuite/gas/csky/cskyv2_float.d: Likewise.
- * testsuite/gas/csky/enhance_dsp.d: Likewise.
- * testsuite/gas/csky/java.d: Likewise.
- * testsuite/gas/csky/v1_float.d: Likewise.
- * testsuite/gas/csky/v2_float_part1.d: Likewise.
- * testsuite/gas/csky/v2_float_part2.d: Likewise.
- * testsuite/gas/csky/v2_tls_gd.d: Likewise.
- * testsuite/gas/csky/v2_tls_ie.d: Likewise.
- * testsuite/gas/csky/v2_tls_ld.d: Likewise.
- * testsuite/gas/csky/v2_tls_le.d: Likewise.
- * testsuite/gas/elf/elf.exp: Add handler for CSKY.
- * testsuite/gas/elf/section2.e-csky: New.
-
-2020-08-27 Alan Modra <amodra@gmail.com>
-
- PR 26467
- * cgen.c (weak_operand_overflow_check): Handle opmask for
- operand length zero. Use 1UL constant.
-
-2020-08-26 Alan Modra <amodra@gmail.com>
-
- PR 26508
- * config/tc-xtensa.c (xg_get_trampoline_chain): Return early
- when n_entries is zero.
-
-2020-08-26 Alan Modra <amodra@gmail.com>
-
- PR 26448
- * symbols.c: Include limits.h.
- (resolve_symbol_value <O_left_shift, O_right_shift>): Do an
- unsigned shift. Warn if shift count larger than valueT size.
-
-2020-08-26 Alan Modra <amodra@gmail.com>
-
- PR 26447
- * expr.c (expr <O_left_shift>): Do an unsigned shift.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
-2020-08-26 David Faust <david.faust@oracle.com>
-
- * config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
- * testsuite/gas/bpf/indcall-1.d: New file.
- * testsuite/gas/bpf/indcall-1.s: Likewise.
- * testsuite/gas/bpf/indcall-bad-1.l: Likewise.
- * testsuite/gas/bpf/indcall-bad-1.s: Likewise.
- * testsuite/gas/bpf/bpf.exp: Run new tests.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- PR 26501
- * config/tc-tic54x.c (tic54x_undefined_symbol): Properly treat
- misc_symbol_hash entries without values.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- PR 26500
- * config/tc-tic4x.c (tic4x_inst_make): Don't die on terminating
- insn with name = "".
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- PR 26441
- * config/tc-cr16.c (get_b_cc): Return NULL early if op isn't
- two or three chars, and don't bother copying.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- PR 26426
- * config/tc-arm.c (do_neon_mvn, do_neon_swp): Bail out on
- NS_NULL shape.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- PR 26410
- * symbols.c (dollar_label_count, dollar_label_max): Make size_t.
- (dollar_label_clear): Don't call memset with NULL pointer.
-
-2020-08-25 Alan Modra <amodra@gmail.com>
-
- * config/tc-arc.c (declare_register_set): Avoid false positive
- format-overflow warning.
- * config/tc-epiphany.c (md_assemble): Likewise.
- * config/tc-mips.c (md_begin): Likewise.
- * config/tc-mmix.c (mmix_md_begin): Likewise.
- * config/tc-nds32.c (nds32_elf_append_relax_relocs): Avoid false
- positive "may be used uninitialized" warning.
-
-2020-08-24 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (csky_archs): Add item for CK860,
- change ck810 and ck807's arch_flag.
- (csky_cpus): Add item for CK860.
- (md_begin): Enable DSP for CK810 and CK807 by default.
- (md_apply_fix): Fix CKCORE_TLS_IE32 relocation failure.
- * testsuite/gas/csky/cskyv2_all.d: Change 'sync 0' to 'sync'.
- * testsuite/gas/csky/cskyv2_all.s: Likewise.
- * testsuite/gas/csky/cskyv2_ck860.d: New.
- * testsuite/gas/csky/cskyv2_ck860.s: New.
- * testsuite/gas/csky/enhance_dsp.d: Change plsli.u16 to plsli.16.
- * testsuite/gas/csky/enhance_dsp.s: Likewise.
-
-2020-08-24 Alan Modra <amodra@gmail.com>
-
- * config/tc-tic54x.c (stag_add_field_symbols): Don't free "name"
- in case where it isn't copied.
- * config/tc-tic54x.h (LOCAL_LABELS_FB): Undef.
- * testsuite/gas/tic54x/field.d: Dump section contents and symbols
- rather than disassembling.
- * testsuite/gas/tic54x/set.d: Adjust for newer disassembly.
-
-2020-08-24 Alan Modra <amodra@gmail.com>
-
- * config/tc-aarch64.c (md_begin): Don't bother checking for
- out of memory failure from str_htab_create.
- * config/tc-arc.c (arc_insert_opcode, md_begin): Likewise.
- (arc_extcorereg, arc_stralloc): Likewise.
- * config/tc-arm.c (md_begin): Likewise.
- * config/tc-cr16.c (initialise_reg_hash_table, md_begin): Likewise.
- * config/tc-cris.c (md_begin): Likewise.
- * config/tc-crx.c (md_begin): Likewise.
- * config/tc-pdp11.c (md_begin): Likewise.
- * config/tc-score.c (s3_build_reg_hsh, s3_begin): Likewise.
- * config/tc-score7.c (s7_build_reg_hsh, s7_begin): Likewise.
-
-2020-08-24 Alan Modra <amodra@gmail.com>
-
- * config/tc-arm.c (move_or_literal_pool): Avoid false positive
- "may be used uninitialised".
- (opcode_lookup): Likewise.
-
-2020-08-24 Alan Modra <amodra@gmail.com>
-
- PR 26526
- * symbols.c (local_symbol_convert): Clear out xtra.
-
-2020-08-21 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (CSKY_ISA_803R2): New.
- (csky_archs): Add ck803r2 series.
- (md_begin): Fix warning about -medsp.
- (csky_get_freg_val): Support lowercase of fpu register name.
- * testsuite/gas/csky/cskyv2_ck803r2.s: New file.
- * testsuite/gas/csky/cskyv2_ck803r2.d: New file.
-
-2020-08-23 Alan Modra <amodra@gmail.com>
-
- PR 26513
- * hash.h (htab_insert): Update prototype and comment.
- (struct string_tuple): Make "value" a const void*.
- (string_tuple_alloc): Likewise.
- (str_hash_find, str_hash_find_n): Cast returned value.
- (str_hash_insert): Add "replace" parameter, and return slot pointer.
- Free alloc'd element when not inserted.
- * hash.c (htab_insert): Likewise. Return slot when element exists,
- otherwise return NULL.
- * read.c (pop_insert): Insert into hash table without first searching.
- * config/tc-avr.c (md_begin): Likewise.
- * config/tc-msp430.c (md_begin): Likewise.
- * config/tc-nds32.c (nds32_init_nds32_pseudo_opcodes): Likewise.
- * config/tc-v850.c (md_begin): Likewise.
- * macro.c (do_formals, define_macro, macro_expand_body): Likewise.
- (delete_macro): Delete from hash table.
- * config/tc-tic54x.c (subsym_create_or_replace): Correct logic.
-
- * symbols.c (local_symbol_make, symbol_table_insert): Allow
- replacement of hash table entries.
- * config/obj-coff-seh.c (seh_hash_insert): Likewise.
- * config/obj-coff.c (tag_insert): Likewise.
- * config/tc-iq2000.c (iq2000_add_macro): Likewise.
- * config/tc-m68k.c (md_begin): Likewise for aliases.
- * config/tc-tic4x.c (tic4x_asg): Likewise.
- * config/tc-tic6x.c (md_begin): Likewise.
-
- * dw2gencfi.c (dwcfi_hash_find_or_make): Disallow replacement of
- hash table entries.
- * ecoff.c (add_string, get_tag): Likewise.
- * macro.c (expand_irp): Likewise.
- * config/obj-elf.c (build_additional_section_info): Likewise.
- * config/tc-aarch64.c (insert_reg_alias): Likewise.
- (checked_hash_insert): Likewise.
- * config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise.
- * config/tc-arc.c (arc_insert_opcode, declare_register): Likewise.
- (declare_addrtype, md_begin, arc_extcorereg): Likewise.
- * config/tc-arm.c (insert_reg_alias): Likewise.
- (arm_tc_equal_in_insn, md_begin): Likewise.
- * config/tc-cr16.c (initialise_reg_hash_table, md_begin): Likewise.
- * config/tc-cris.c (md_begin): Likewise.
- * config/tc-crx.c (md_begin): Likewise.
- * config/tc-csky.c (md_begin): Likewise.
- * config/tc-d10v.c (md_begin): Likewise.
- * config/tc-dlx.c (md_begin): Likewise.
- * config/tc-ft32.c (md_begin): Likewise.
- * config/tc-h8300.c (md_begin): Likewise.
- * config/tc-hppa.c (md_begin): Likewise.
- * config/tc-i386.c (md_begin): Likewise.
- * config/tc-ia64.c (dot_rot, dot_entry, declare_register): Likewise.
- (md_begin, dot_alias): Likewise.
- * config/tc-m68hc11.c (md_begin): Likewise.
- * config/tc-m68k.c (md_begin): Likewise.
- * config/tc-mcore.c (md_begin): Likewise.
- * config/tc-microblaze.c (md_begin): Likewise.
- * config/tc-mips.c (md_begin): Likewise.
- * config/tc-mmix.c (md_begin): Likewise.
- * config/tc-mn10200.c (md_begin): Likewise.
- * config/tc-mn10300.c (md_begin): Likewise.
- * config/tc-moxie.c (md_begin): Likewise.
- * config/tc-nds32.c (nds32_relax_hint, md_begin): Likewise.
- * config/tc-nios2.c (md_begin): Likewise.
- * config/tc-ns32k.c (md_begin): Likewise.
- * config/tc-pdp11.c (md_begin): Likewise.
- * config/tc-pj.c (fake_opcode, md_begin): Likewise.
- * config/tc-ppc.c (ppc_setup_opcodes): Likewise.
- * config/tc-pru.c (md_begin): Likewise.
- * config/tc-riscv.c (init_ext_version_hash): Likewise.
- (init_opcode_names_hash, hash_reg_name, init_opcode_hash): Likewise.
- (riscv_init_csr_hash): Likewise.
- * config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
- * config/tc-score.c (s3_insert_reg): Likewise.
- (s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise.
- * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
- (s7_build_dependency_insn_hsh, s7_insert_reg): Likewise.
- * config/tc-sh.c (md_begin): Likewise.
- * config/tc-sparc.c (md_begin): Likewise.
- * config/tc-spu.c (md_begin): Likewise.
- * config/tc-tic30.c (md_begin): Likewise.
- * config/tc-tic4x.c (tic4x_inst_insert): Likewise.
- * config/tc-tic54x.c (stag_add_field_symbols, md_begin): Likewise.
- (tic54x_endstruct, tic54x_var, tic54x_macro_info): Likewise.
- (subsym_substitute): Likewise.
- * config/tc-tilegx.c (md_begin): Likewise.
- * config/tc-tilepro.c (md_begin): Likewise.
- * config/tc-vax.c (vip_begin): Likewise.
- * config/tc-wasm32.c (md_begin): Likewise.
- * config/tc-xgate.c (md_begin): Likewise.
- * config/tc-z8k.c (md_begin): Likewise.
- * testsuite/gas/ppc/dcbt.d,
- * testsuite/gas/ppc/dcbt.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
- * ecoff.c (add_string): Report fatal error on duplicates.
- * config/tc-alpha.c (md_begin): Likewise.
- * config/tc-arc.c (arc_insert_opcode, declare_register): Likewise.
- (declare_addrtype, md_begin, arc_extcorereg): Likewise.
- * config/tc-cr16.c (initialise_reg_hash_table, md_begin): Likewise.
- * config/tc-cris.c (md_begin): Likewise.
- * config/tc-crx.c (md_begin): Likewise.
- * config/tc-dlx.c (md_begin): Likewise.
- * config/tc-hppa.c (md_begin): Likewise.
- * config/tc-i386.c (md_begin): Likewise.
- * config/tc-ia64.c (dot_rot, dot_entry, declare_register): Likewise.
- (md_begin): Likewise.
- * config/tc-m68k.c (md_begin): Likewise.
- * config/tc-mips.c (md_begin): Likewise.
- * config/tc-nios2.c (md_begin): Likewise.
- * config/tc-ns32k.c (md_begin): Likewise.
- * config/tc-ppc.c (ppc_setup_opcodes): Likewise.
- * config/tc-pru.c (md_begin): Likewise.
- * config/tc-riscv.c (init_ext_version_hash): Likewise.
- (init_opcode_names_hash, hash_reg_name, init_opcode_hash): Likewise.
- * config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
- * config/tc-sparc.c (md_begin): Likewise.
- * config/tc-tic30.c (md_begin): Likewise.
- * config/tc-tic4x.c (tic4x_inst_insert): Likewise.
- * config/tc-tilegx.c (md_begin): Likewise.
- * config/tc-tilepro.c (md_begin): Likewise.
- * config/tc-vax.c (vip_begin): Likewise.
-
- * config/tc-alpha.c,
- * config/tc-arm.c,
- * config/tc-avr.c,
- * config/tc-cr16.c,
- * config/tc-csky.c,
- * config/tc-i386.c,
- * config/tc-m68hc11.c,
- * config/tc-m68k.c,
- * config/tc-microblaze.c,
- * config/tc-ns32k.c,
- * config/tc-pj.c,
- * config/tc-ppc.c,
- * config/tc-score.c,
- * config/tc-score7.c,
- * config/tc-tic4x.c,
- * config/tc-tic54x.c,
- * config/tc-tilegx.c,
- * config/tc-tilepro.c,
- * config/tc-xgate.c: Formatting.
-
-2020-08-21 Alan Modra <amodra@gmail.com>
-
- * symbols.c (struct local_symbol): Add "hash" entry. Reorder fields.
- Delete union. Adjust code throughout file.
- (struct symbol): Add "hash", "name" and "x" entries. Reorder fields.
- Split off some to..
- (struct xsymbol): ..this. New struct. Adjust code throughout file
- accessing these fields.
- (struct symbol_entry): Delete.
- (union symbol_entry): New.
- (hash_symbol_entry): Adjust for symbol_entry_t change.
- (symbol_entry_find): Likewise.
- (eq_symbol_entry): Compare hash values too.
- (symbol_entry_alloc): Delete.
- (local_symbol_converted_p, local_symbol_mark_converted): Delete.
- (local_symbol_get_real_symbol, local_symbol_set_real_symbol): Delete.
- (local_hash): Delete.
- (abs_symbol_x, dot_symbol_x): New static var.
- (symbol_init): New function.
- (symbol_create): Rewrite.
- (LOCAL_SYMBOL_CHECK): Delete. Replace uses throughout with simple
- test of flags.local_symbol.
- (local_symbol_make): Adjust for struct local_symbol changes.
- (local_symbol_convert): Rewrite. Adjust all callers.
- (symbol_table_insert): Simplify.
- (symbol_clone): Comment on local sym cloning. Handle split symbol
- struct.
- (get_real_sym): Delete. Remove all uses.
- (symbol_find_exact_noref): Simplify.
- (resolve_local_symbol): Don't resolve non-locals.
- (S_SET_SEGMENT): Don't special case reg_section.
- (S_SET_NAME): Set both name and bsym->name.
- (symbol_mark_resolved, symbol_resolved_p): Simplify.
- (symbol_symbolS): Update comment.
- (symbol_begin): Don't create local_hash. Adjust abs_symbol setup.
- (dot_symbol_init): Adjust dot_symbol setup.
- (symbol_print_statistics): Delete local_hash stats.
-
-2020-08-21 Alan Modra <amodra@gmail.com>
-
- * symbols.c (struct symbol_flags): Rename sy_volatile to volatil,
- and remove sy_ from other field names. Update throughout.
- (struct symbol): Remove sy_ from field names. Delete unused
- TARGET_SYMBOL_FIELDS. Update throughout file. Move after..
- (struct local_symbol): ..here. Remove lsy_ from field names.
- Delete unused TC_LOCAL_SYMFIELD_TYPE. Update throughout file.
- (local_symbol_resolved_p, local_symbol_mark_resolved): Delete.
- Expand uses throughout file.
- (local_symbol_get_frag, local_symbol_set_frag): Likewise.
- (symbol_new): Move symbol_table_frozen test to..
- (symbol_append): ..here, and..
- (symbol_insert): ..here.
- (resolve_symbol_value, symbol_relc_make_expr): White space fixes.
- (HANDLE_XADD_OPT1, HANDLE_XADD_OPT2): Likewise.
- * config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Update.
-
-2020-08-21 Alan Modra <amodra@gmail.com>
-
- * symbols.h (symbol_new, symbol_create, local_symbol_make),
- (symbol_temp_new): Arrange params as section, frag, offset.
- * symbols.c: Adjust to suit.
- * as.c: Likewise.
- * cgen.c: Likewise.
- * dwarf2dbg.c: Likewise.
- * ecoff.c: Likewise.
- * expr.c: Likewise.
- * itbl-ops.c: Likewise.
- * read.c: Likewise.
- * stabs.c: Likewise.
- * subsegs.c: Likewise.
- * config/obj-coff.c: Likewise.
- * config/obj-elf.c: Likewise.
- * config/obj-macho.c: Likewise.
- * config/tc-aarch64.c: Likewise.
- * config/tc-alpha.c: Likewise.
- * config/tc-arc.c: Likewise.
- * config/tc-arm.c: Likewise.
- * config/tc-avr.c: Likewise.
- * config/tc-cr16.c: Likewise.
- * config/tc-cris.c: Likewise.
- * config/tc-csky.c: Likewise.
- * config/tc-dlx.c: Likewise.
- * config/tc-hppa.c: Likewise.
- * config/tc-i386.c: Likewise.
- * config/tc-ia64.c: Likewise.
- * config/tc-m32r.c: Likewise.
- * config/tc-m68k.c: Likewise.
- * config/tc-mips.c: Likewise.
- * config/tc-mmix.c: Likewise.
- * config/tc-mn10200.c: Likewise.
- * config/tc-mn10300.c: Likewise.
- * config/tc-nds32.c: Likewise.
- * config/tc-nios2.c: Likewise.
- * config/tc-ppc.c: Likewise.
- * config/tc-riscv.c: Likewise.
- * config/tc-s390.c: Likewise.
- * config/tc-sh.c: Likewise.
- * config/tc-tic4x.c: Likewise.
- * config/tc-tic54x.c: Likewise.
- * config/tc-xtensa.c: Likewise.
-
-2020-08-21 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (csky_insn_info): Add member last_isize.
- (md_assemble): Assign value to csky_insn.last_isize.
- * testsuite/gas/csky/enhance_dsp.d: Test bloop's two operands form.
- * testsuite/gas/csky/enhance_dsp.s: Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * NEWS: Mention --reduce-memory-overheads and --hash-size arguments
- options.
- * as.c: Remove the options from help.
- * doc/as.texi: Remove options.
- * doc/internals.texi: Remove hash from documentation.
- * hash.c (struct hash_entry): Remove.
- (struct hash_control): Likewise.
- (set_gas_hash_table_size): Likewise.
- (hash_new_sized): Likewise.
- (hash_new): Likewise.
- (hash_die): Likewise.
- (hash_lookup): Likewise.
- (hash_insert): Likewise.
- (hash_jam): Likewise.
- (hash_replace): Likewise.
- (hash_find): Likewise.
- (hash_find_n): Likewise.
- (hash_delete): Likewise.
- (hash_traverse): Likewise.
- (hash_print_statistics): Likewise.
- (TABLES): Likewise.
- (STATBUFSIZE): Likewise.
- (main): Likewise.
- (what): Likewise.
- (destroy): Likewise.
- (applicatee): Likewise.
- (whattable): Likewise.
- * hash.h (struct hash_control): Likewise.
- (set_gas_hash_table_size): Likewise.
- (hash_new): Likewise.
- (hash_new_sized): Likewise.
- (hash_die): Likewise.
- (hash_insert): Likewise.
- (hash_jam): Likewise.
- (hash_replace): Likewise.
- (hash_find): Likewise.
- (hash_find_n): Likewise.
- (hash_delete): Likewise.
- (hash_traverse): Likewise.
- (hash_print_statistics): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * config/obj-coff-seh.c (seh_hash_insert): Port to use new
- str_htab type.
- (seh_hash_find): Likewise.
- (seh_hash_find_or_make): Likewise.
- * config/obj-coff.c (tag_init): Likewise.
- (tag_insert): Likewise.
- (tag_find): Likewise.
- * config/obj-elf.c (struct group_list): Likewise.
- (build_additional_section_info): Likewise.
- (free_section_idx): Likewise.
- (elf_adjust_symtab): Likewise.
- (elf_frob_file_after_relocs): Likewise.
- * config/tc-aarch64.c (INSN_SIZE): Likewise.
- (parse_reg): Likewise.
- (insert_reg_alias): Likewise.
- (create_register_alias): Likewise.
- (s_unreq): Likewise.
- (parse_shift): Likewise.
- (parse_pldop): Likewise.
- (parse_barrier): Likewise.
- (parse_barrier_psb): Likewise.
- (parse_bti_operand): Likewise.
- (parse_sys_reg): Likewise.
- (parse_sys_ins_reg): Likewise.
- (lookup_mnemonic): Likewise.
- (opcode_lookup): Likewise.
- (parse_operands): Likewise.
- (checked_hash_insert): Likewise.
- (sysreg_hash_insert): Likewise.
- (fill_instruction_hash_table): Likewise.
- (md_begin): Likewise.
- * config/tc-alpha.c (struct alpha_reloc_tag): Likewise.
- (get_alpha_reloc_tag): Likewise.
- (assemble_tokens_to_insn): Likewise.
- (assemble_tokens): Likewise.
- (md_begin): Likewise.
- * config/tc-arc.c (arc_find_opcode): Likewise.
- (arc_insert_opcode): Likewise.
- (find_opcode_match): Likewise.
- (declare_register): Likewise.
- (declare_addrtype): Likewise.
- (md_begin): Likewise.
- (arc_parse_name): Likewise.
- (tc_arc_regname_to_dw2regnum): Likewise.
- (arc_extcorereg): Likewise.
- * config/tc-arm.c (MVE_BAD_QREG): Likewise.
- (arm_reg_parse_multi): Likewise.
- (parse_reloc): Likewise.
- (insert_reg_alias): Likewise.
- (create_register_alias): Likewise.
- (s_unreq): Likewise.
- (parse_shift): Likewise.
- (parse_psr): Likewise.
- (parse_cond): Likewise.
- (parse_barrier): Likewise.
- (do_vfp_nsyn_opcode): Likewise.
- (opcode_lookup): Likewise.
- (arm_tc_equal_in_insn): Likewise.
- (md_begin): Likewise.
- * config/tc-avr.c (md_begin): Likewise.
- (avr_ldi_expression): Likewise.
- (md_assemble): Likewise.
- (avr_update_gccisr): Likewise.
- (avr_emit_insn): Likewise.
- * config/tc-cr16.c (get_register): Likewise.
- (get_register_pair): Likewise.
- (get_index_register): Likewise.
- (get_index_register_pair): Likewise.
- (get_pregister): Likewise.
- (get_pregisterp): Likewise.
- (initialise_reg_hash_table): Likewise.
- (md_begin): Likewise.
- (cr16_assemble): Likewise.
- (md_assemble): Likewise.
- * config/tc-cris.c (cris_insn_first_word_frag): Likewise.
- (md_begin): Likewise.
- (cris_process_instruction): Likewise.
- * config/tc-crx.c (get_register): Likewise.
- (get_copregister): Likewise.
- (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-csky.c (md_begin): Likewise.
- (parse_opcode): Likewise.
- (get_operand_value): Likewise.
- (v1_work_jbsr): Likewise.
- (v2_work_rotlc): Likewise.
- (v2_work_bgeni): Likewise.
- (v2_work_not): Likewise.
- * config/tc-d10v.c (sizeof): Likewise.
- (md_begin): Likewise.
- (do_assemble): Likewise.
- (md_apply_fix): Likewise.
- * config/tc-d30v.c (sizeof): Likewise.
- (md_begin): Likewise.
- (do_assemble): Likewise.
- * config/tc-dlx.c (RELOC_DLX_VTENTRY): Likewise.
- (md_begin): Likewise.
- (machine_ip): Likewise.
- * config/tc-ft32.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-h8300.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-hppa.c (pa_ip): Likewise.
- (md_begin): Likewise.
- * config/tc-i386.c (md_begin): Likewise.
- (i386_print_statistics): Likewise.
- (parse_insn): Likewise.
- (process_operands): Likewise.
- (i386_index_check): Likewise.
- (parse_real_register): Likewise.
- * config/tc-ia64.c (dot_rot): Likewise.
- (dot_entry): Likewise.
- (declare_register): Likewise.
- (md_begin): Likewise.
- (ia64_parse_name): Likewise.
- (md_assemble): Likewise.
- (dot_alias): Likewise.
- (do_alias): Likewise.
- (ia64_adjust_symtab): Likewise.
- (do_secalias): Likewise.
- (ia64_frob_file): Likewise.
- * config/tc-m68hc11.c (m68hc11_print_statistics): Likewise.
- (md_begin): Likewise.
- (print_insn_format): Likewise.
- (md_assemble): Likewise.
- * config/tc-m68k.c (tc_gen_reloc): Likewise.
- (m68k_ip): Likewise.
- (md_begin): Likewise.
- * config/tc-mcore.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-microblaze.c (md_begin): Likewise.
- (md_assemble): Likewise.
- (md_apply_fix): Likewise.
- * config/tc-mips.c (nopic_need_relax): Likewise.
- (md_begin): Likewise.
- (macro_build): Likewise.
- (mips16_macro_build): Likewise.
- (mips_lookup_insn): Likewise.
- (mips_ip): Likewise.
- (mips16_ip): Likewise.
- * config/tc-mmix.c (sizeof): Likewise.
- (mmix_md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-mn10200.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-mn10300.c (HAVE_AM30): Likewise.
- (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-moxie.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-msp430.c (md_begin): Likewise.
- (msp430_operands): Likewise.
- (md_assemble): Likewise.
- * config/tc-nds32.c (PV_DONT_CARE): Likewise.
- (builtin_isreg): Likewise.
- (builtin_regnum): Likewise.
- (nds32_init_nds32_pseudo_opcodes): Likewise.
- (nds32_lookup_pseudo_opcode): Likewise.
- (nds32_relax_hint): Likewise.
- (md_begin): Likewise.
- (nds32_find_reloc_table): Likewise.
- (nds32_elf_append_relax_relocs_traverse): Likewise.
- (nds32_relax_branch_instructions): Likewise.
- (md_convert_frag): Likewise.
- (nds32_elf_analysis_relax_hint): Likewise.
- (tc_nds32_regname_to_dw2regnum): Likewise.
- * config/tc-nios2.c (nios2_opcode_lookup): Likewise.
- (nios2_reg_lookup): Likewise.
- (nios2_ps_lookup): Likewise.
- (md_begin): Likewise.
- * config/tc-ns32k.c (struct hash_control): Likewise.
- (parse): Likewise.
- (md_begin): Likewise.
- * config/tc-pdp11.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-pj.c (fake_opcode): Likewise.
- (alias): Likewise.
- (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-ppc.c (ppc_setup_opcodes): Likewise.
- (md_assemble): Likewise.
- * config/tc-pru.c (pru_opcode_lookup): Likewise.
- (pru_reg_lookup): Likewise.
- (md_begin): Likewise.
- (md_end): Likewise.
- * config/tc-riscv.c (init_ext_version_hash): Likewise.
- (riscv_get_default_ext_version): Likewise.
- (riscv_set_arch): Likewise.
- (init_opcode_names_hash): Likewise.
- (opcode_name_lookup): Likewise.
- (enum reg_class): Likewise.
- (hash_reg_name): Likewise.
- (riscv_init_csr_hash): Likewise.
- (reg_csr_lookup_internal): Likewise.
- (reg_lookup_internal): Likewise.
- (init_opcode_hash): Likewise.
- (md_begin): Likewise.
- (DECLARE_CSR): Likewise.
- (macro_build): Likewise.
- (riscv_ip): Likewise.
- * config/tc-s390.c (register_name): Likewise.
- (s390_setup_opcodes): Likewise.
- (md_begin): Likewise.
- (md_assemble): Likewise.
- (s390_insn): Likewise.
- * config/tc-score.c (struct s3_reg_map): Likewise.
- (s3_score_reg_parse): Likewise.
- (s3_dependency_type_from_insn): Likewise.
- (s3_parse_16_32_inst): Likewise.
- (s3_parse_48_inst): Likewise.
- (s3_insert_reg): Likewise.
- (s3_build_reg_hsh): Likewise.
- (s3_build_score_ops_hsh): Likewise.
- (s3_build_dependency_insn_hsh): Likewise.
- (s3_begin): Likewise.
- * config/tc-score7.c (struct s7_reg_map): Likewise.
- (s7_score_reg_parse): Likewise.
- (s7_dependency_type_from_insn): Likewise.
- (s7_parse_16_32_inst): Likewise.
- (s7_build_score_ops_hsh): Likewise.
- (s7_build_dependency_insn_hsh): Likewise.
- (s7_insert_reg): Likewise.
- (s7_build_reg_hsh): Likewise.
- (s7_begin): Likewise.
- * config/tc-sh.c (EMPTY): Likewise.
- (md_begin): Likewise.
- (find_cooked_opcode): Likewise.
- * config/tc-sparc.c (md_begin): Likewise.
- (sparc_ip): Likewise.
- * config/tc-spu.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-tic30.c (md_begin): Likewise.
- (tic30_operand): Likewise.
- (tic30_parallel_insn): Likewise.
- (md_assemble): Likewise.
- * config/tc-tic4x.c (TIC4X_ALT_SYNTAX): Likewise.
- (tic4x_asg): Likewise.
- (tic4x_inst_insert): Likewise.
- (tic4x_inst_add): Likewise.
- (md_begin): Likewise.
- (tic4x_operand_parse): Likewise.
- (md_assemble): Likewise.
- * config/tc-tic54x.c (MAX_SUBSYM_HASH): Likewise.
- (stag_add_field_symbols): Likewise.
- (tic54x_endstruct): Likewise.
- (tic54x_tag): Likewise.
- (tic54x_remove_local_label): Likewise.
- (tic54x_clear_local_labels): Likewise.
- (tic54x_var): Likewise.
- (tic54x_macro_start): Likewise.
- (tic54x_macro_info): Likewise.
- (tic54x_macro_end): Likewise.
- (subsym_isreg): Likewise.
- (subsym_structsz): Likewise.
- (md_begin): Likewise.
- (is_mmreg): Likewise.
- (is_type): Likewise.
- (encode_condition): Likewise.
- (encode_cc3): Likewise.
- (encode_cc2): Likewise.
- (encode_operand): Likewise.
- (tic54x_parse_insn): Likewise.
- (tic54x_parse_parallel_insn_firstline): Likewise.
- (subsym_create_or_replace): Likewise.
- (subsym_lookup): Likewise.
- (subsym_substitute): Likewise.
- (tic54x_undefined_symbol): Likewise.
- * config/tc-tic6x.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-tilegx.c (O_hw2_last_plt): Likewise.
- (INSERT_SPECIAL_OP): Likewise.
- (md_begin): Likewise.
- (tilegx_parse_name): Likewise.
- (parse_reg_expression): Likewise.
- (md_assemble): Likewise.
- * config/tc-tilepro.c (O_tls_ie_load): Likewise.
- (INSERT_SPECIAL_OP): Likewise.
- (tilepro_parse_name): Likewise.
- (parse_reg_expression): Likewise.
- (md_assemble): Likewise.
- * config/tc-v850.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-vax.c (md_ri_to_chars): Likewise.
- (vip_begin): Likewise.
- (vip): Likewise.
- (main): Likewise.
- (md_begin): Likewise.
- * config/tc-wasm32.c (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-xgate.c (xgate_parse_operand): Likewise.
- (md_begin): Likewise.
- (md_assemble): Likewise.
- * config/tc-z8k.c (md_begin): Likewise.
- (md_assemble): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * dw2gencfi.c (dwcfi_hash_insert): Use htab_t and str_hash_*
- functions.
- (dwcfi_hash_find): Likewise.
- (dwcfi_hash_find_or_make): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * ecoff.c (INIT_VARRAY): Use htab_t.
- (add_string): Likewise.
- (ecoff_read_begin_hook): Use new str_htab_create.
- (get_tag): Use htab_t.
- (add_file): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * hash.h (struct string_tuple): New.
- (hash_string_tuple): Likewise.
- (eq_string_tuple): Likewise.
- (string_tuple_alloc): Likewise.
- (str_hash_find): Likewise.
- (str_hash_find_n): Likewise.
- (str_hash_delete): Likewise.
- (str_hash_insert): Likewise.
- (str_htab_create): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * symbols.c (struct symbol_entry): New.
- (hash_symbol_entry): Likewise.
- (eq_symbol_entry): Likewise.
- (symbol_entry_alloc): Likewise.
- (symbol_entry_find): Likewise.
- (local_symbol_make): Use htab hash table.
- (local_symbol_convert): Likewise.
- (symbol_table_insert): Likewise.
- (symbol_find_exact_noref): Likewise.
- (resolve_local_symbol): Likewise.
- (resolve_local_symbol_values): Likewise.
- (symbol_begin): Likewise.
- (symbol_print_statistics): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * read.c (struct po_entry): New.
- (hash_po_entry): Likewise.
- (eq_po_entry): Likewise.
- (po_entry_alloc): Likewise.
- (po_entry_find): Likewise.
- (pop_insert): Likewise.
- (pobegin): Use htab hash table.
- (read_a_source_file): Likewise.
- (s_macro): Likewise.
- (read_print_statistics): Likewise.
- * config/tc-m68k.c (m68k_conditional_pseudoop): Add const qualifier.
- * config/tc-m68k.h (m68k_conditional_pseudoop): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * config/tc-iq2000.c (iq2000_add_macro): Use htab hash table.
- * macro.c (struct hash_control): Use htab.
- (macro_init): Likewise.
- (do_formals): Likewise.
- (free_macro): Likewise.
- (define_macro): Likewise.
- (sub_actual): Likewise.
- (macro_expand_body): Likewise.
- (macro_expand): Likewise.
- (check_macro): Likewise.
- (delete_macro): Likewise.
- (expand_irp): Likewise.
- * macro.h (struct macro_hash_entry): New struct.
- (hash_macro_entry): New.
- (eq_macro_entry): Likewise.
- (macro_entry_alloc): Likewise.
- (macro_entry_find): Likewise.
- (struct formal_hash_entry): Likewise.
- (hash_formal_entry): Likewise.
- (eq_formal_entry): Likewise.
- (formal_entry_alloc): Likewise.
- (formal_entry_find): Likewise.
-
-2020-08-20 Martin Liska <mliska@suse.cz>
-
- * as.h: Include hashtab.h.
- * hash.c (htab_insert): New.
- (htab_print_statistics): Likewise.
- * hash.h (htab_insert): Likewise.
- (htab_print_statistics): Likewise.
-
-2020-08-19 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/int128.s: Correct vcmpuq.
- * testsuite/gas/ppc/int128.d: Update.
- * testsuite/gas/ppc/xvtlsbb.d: Update.
-
-2020-08-18 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/vsx4.s: Update test to use new mnemonic.
- * testsuite/gas/ppc/vsx4.d: Likewise.
-
-2020-08-17 Alex Coplan <alex.coplan@arm.com>
-
- * config/obj-elf.c (obj_elf_change_section): When repurposing an
- existing symbol, ensure that we set sy_value as per other (fresh)
- section symbols.
- * testsuite/gas/elf/elf.exp: Add new test.
- * testsuite/gas/elf/section-symbol-redef.d: New test.
- * testsuite/gas/elf/section-symbol-redef.s: Input for test.
-
-2020-08-13 Nick Clifton <nickc@redhat.com>
-
- PR 26359
- * config/obj-som.c (obj_som_init_stab_section): Do nothing if the
- $GDB_DEBUG$ section has already been created.
-
-2020-08-12 Joe Ramsay <joe.ramsay@.arm.com>
-
- * config/tc-arm.c (do_neon_cvt_1): Parse vcvtne as vcvt-ne for
- NS_FD shape when MVE is present
- * testsuite/gas/arm/mve-vcvtne-it-bad.d: New test.
- * testsuite/gas/arm/mve-vcvtne-it-bad.l: New test.
- * testsuite/gas/arm/mve-vcvtne-it-bad.s: New test.
- * testsuite/gas/arm/mve-vcvtne-it.d: New test.
- * testsuite/gas/arm/mve-vcvtne-it.s: New test.
-
-2020-08-12 Alex Coplan <alex.coplan@arm.com>
-
- * testsuite/gas/aarch64/mpam-bad.d: New test.
- * testsuite/gas/aarch64/mpam-bad.l: Error output.
- * testsuite/gas/aarch64/mpam-bad.s: Input.
- * testsuite/gas/aarch64/mpam.d: New test.
- * testsuite/gas/aarch64/mpam.s: Input.
-
-2020-08-12 Nick Clifton <nickc@redhat.com>
-
- PR 26346
- * doc/c-riscv.texi (RISC-V-Options): Fix typo in the description
- of the -mno-csr-check option.
-
-2020-08-12 Nick Clifton <nickc@redhat.com>
-
- * po/ru.po: Updated Russian translation.
-
-2020-08-10 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing
- a long system register.
- (parse_sys_ins_reg): Likewise.
- (sysreg_hash_insert): New.
- (md_begin): Use sysreg_hash_insert() to ensure all system
- registers are no longer than the maximum length at startup.
- * testsuite/gas/aarch64/invalid-sysreg-assert.d: New test.
- * testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output.
- * testsuite/gas/aarch64/invalid-sysreg-assert.s: Input.
-
-2020-08-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
-
- * config/tc-aarch64.c (parse_sys_reg): Call to
- aarch64_sys_ins_reg_supported_p instead of
- aarch64_sys_reg_supported_p.
- (parse_sys_ins_reg): Add aarch64_sys_reg_deprecated_p check.
- * testsuite/gas/aarch64/illegal-sysreg-5.d: New test.
- * testsuite/gas/aarch64/illegal-sysreg-5.l: New test.
- * testsuite/gas/aarch64/sysreg-5.s: New test.
-
-2020-08-10 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/power8.d,
- * testsuite/gas/ppc/power8.s: Add miso.
- * testsuite/gas/ppc/power9.d,
- * testsuite/gas/ppc/power8.s: Add exser, msgsndu, msgclru.
-
-2020-08-10 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/power8.d: Update.
- * testsuite/gas/ppc/vsx2.d: Update.
-
-2020-08-10 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_assemble): Error for lmw, stmw, lswi, lswx,
- stswi, or stswx in little-endian mode.
- * testsuite/gas/ppc/476.d,
- * testsuite/gas/ppc/476.s: Delete lmw, stmw, lswi, lswx, stswi, stswx.
- * testsuite/gas/ppc/a2.d,
- * testsuite/gas/ppc/a2.s: Move lmw, stmw, lswi, lswx, stswi, stswx..
- * testsuite/gas/ppc/be.d,
- * testsuite/gas/ppc/be.s: ..to here, new big-endian only test.
- * testsuite/gas/ppc/le_error.d,
- * testsuite/gas/ppc/le_error.l: New little-endian test.
- * testsuite/gas/ppc/ppc.exp: Run new tests.
-
-2020-08-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * read.c (read_a_source_file): Ignore rest of line on overflow
- error.
-
-2020-08-06 Alex Coplan <alex.coplan@arm.com>
-
- * read.c (read_a_source_file): Use long for local labels, detect
- overflow and raise an error for overly-long labels.
- * testsuite/gas/all/gas.exp: Add local-label-overflow test.
- * testsuite/gas/all/local-label-overflow.d: New test.
- * testsuite/gas/all/local-label-overflow.l: Error output.
- * testsuite/gas/all/local-label-overflow.s: Input.
-
-2020-08-04 Christian Groessler <chris@groessler.org>
-
- * testsuite/gas/z8k/inout.d: Adapt to correct encoding of
- "sout/soutb #imm,reg"
-
-2020-08-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention {disp16} pseudo prefix.
-
-2020-08-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/i386/x86-64-pseudos.d: Revert an accidental
- change.
-
-2020-08-04 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (out_debug_abbrev): When DWARF2_VERSION >= 4, use
- DW_FORM_udata for DW_AT_high_pc.
- (out_debug_info): Use emit_leb128_expr for DW_AT_high_pc, when
- DWARF2_VERSION >= 4.
- * read.c (emit_leb128_exp): No longer static.
- * read.h (emit_leb128_exp): Define.
-
-2020-08-02 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (out_dir_and_file_list): For DWARF5 emit at
- least one directory if there is at least one file. Use dirs[1]
- if dirs[0] is not set, or if there is no dirs[1] the current
- working directory. Use files[1] filename, when files[0] filename
- isn't set.
-
-2020-08-02 Mark Wielaard <mark@klomp.org>
-
- * dwarf2dbg.c (out_debug_info): Emit unit type and abbrev offset
- for DWARF5.
- * testsuite/gas/elf/dwarf-4-cu.d: New file.
- * testsuite/gas/elf/dwarf-4-cu.s: Likewise.
- * testsuite/gas/elf/dwarf-5-cu.d: Likewise.
- * testsuite/gas/elf/dwarf-5-cu.s: Likewise.
- * testsuite/gas/elf/elf.exp: Run dwarf-4-cu and dwarf-5-cu.
-
-2020-08-02 Mark Wielaard <mark@klomp.org>
-
- * doc/as.texi (--gdwarf-[345]): Fix typo.
-
-2020-08-03 Jozef Lawrynowicz <jozef.l@mittosystems.com>
-
- * config/tc-msp430.c (OPTION_MOVE_DATA): Remove.
- (md_parse_option): Remove case for OPTION_MOVE_DATA.
- (md_longopts): Remove "md" entry.
- (md_show_usage): Likewise.
-
-2020-07-30 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26305
- * config/tc-i386.c (_i386_insn::disp_encoding): Add
- disp_encoding_16bit.
- (parse_insn): Check Prefix_XXX for pseudo prefixes. Handle
- {disp16}.
- (build_modrm_byte): Handle {disp16}.
- (i386_index_check): Check invalid {disp16} and {disp32} pseudo
- prefixes.
- * doc/c-i386.texi: Update {disp32} documentation and document
- {disp16}.
- * testsuite/gas/i386/i386.exp: Run x86-64-inval-pseudo.
- * testsuite/gas/i386/inval-pseudo.s: Add {disp32}/{disp16}
- tests.
- * testsuite/gas/i386/pseudos.s: Add {disp8}/{disp32} vmovaps
- tests with 128-byte displacement. Add {disp16} tests.
- * testsuite/gas/i386/x86-64-pseudos.s: Add {disp8}/{disp32}
- vmovaps test. Add (%r13)/(%r13d) tests.
- * testsuite/gas/i386/x86-64-inval-pseudo.l: New file.
- * testsuite/gas/i386/x86-64-inval-pseudo.s: Likewise.
- * testsuite/gas/i386/inval-pseudo.l: Updated.
- * testsuite/gas/i386/pseudos.d: Likewise.
- * testsuite/gas/i386/x86-64-pseudos.d: Likewise.
-
-2020-07-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
-
- * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
- * Makefile.in, doc/Makefile.in: Regenerate.
- * configure: Regenerate.
-
-2020-07-30 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/elf/dwarf2-3.d:Pass --gdwarf-3 to assembler.
- * testsuite/gas/elf/dwarf2-5.d: Likewise.
- * testsuite/gas/i386/dw2-compress-3a.d: Likewise.
- * testsuite/gas/i386/dw2-compress-3b.d: Likewise.
- * testsuite/gas/i386/dw2-compressed-3a.d: Likewise.
- * testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
-
-2020-07-30 Nick Clifton <nickc@redhat.com>
-
- * as.c (dwarf_level): Initialise to 3 in case this is not set on
- the command line.
-
-2020-07-29 Maciej W. Rozycki <macro@linux-mips.org>
-
- * testsuite/gas/mips/global-local-symtab-sort-o32.d: New test.
- * testsuite/gas/mips/global-local-symtab-sort-o32t.d: New test.
- * testsuite/gas/mips/global-local-symtab-sort-n32.d: New test.
- * testsuite/gas/mips/global-local-symtab-sort-n32t.d: New test.
- * testsuite/gas/mips/global-local-symtab-sort-n64.d: New test.
- * testsuite/gas/mips/global-local-symtab-sort-n64t.d: New test.
- * testsuite/gas/mips/mips.exp: Run the new tests.
-
-2020-07-29 Maciej W. Rozycki <macro@linux-mips.org>
-
- * testsuite/gas/mips/global-local-symtab-o32.d: New test.
- * testsuite/gas/mips/global-local-symtab-o32t.d: New test.
- * testsuite/gas/mips/global-local-symtab-n32.d: New test.
- * testsuite/gas/mips/global-local-symtab-n32t.d: New test.
- * testsuite/gas/mips/global-local-symtab-n64.d: New test.
- * testsuite/gas/mips/global-local-symtab.s: New test source.
- * testsuite/gas/mips/mips.exp: Run the new tests.
-
-2020-07-28 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26305
- * config/tc-i386.c (build_modrm_byte): Use disp32/disp16 on
- (%bp)/(%ebp)/(%rbp) for {disp32}.
- * doc/c-i386.texi: Update {disp32} documentation.
- * testsuite/gas/i386/pseudos.s: Add (%bp)/(%ebp) tests.
- * testsuite/gas/i386/x86-64-pseudos.s: Add (%ebp)/(%rbp) tests.
- * testsuite/gas/i386/pseudos.d: Updated.
- * testsuite/gas/i386/x86-64-pseudos.d: Likewise.
-
-2020-07-27 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/as.texi: Replace preceeded with preceded.
-
-2020-07-22 Maciej W. Rozycki <macro@linux-mips.org>
-
- * testsuite/gas/mips/jal-svr4pic-irix.d: New file.
- * testsuite/gas/mips/mips1@jal-svr4pic-irix.d: New file.
- * testsuite/gas/mips/mipsr6@jal-svr4pic-irix.d: New file.
- * testsuite/gas/mips/micromips@jal-svr4pic-irix.d: New file.
- * testsuite/gas/mips/r3000@jal-svr4pic-irix.d: New file.
- * testsuite/gas/mips/jal-svr4pic-local-irix.d: New file.
- * testsuite/gas/mips/mips1@jal-svr4pic-local-irix.d: New file.
- * testsuite/gas/mips/micromips@jal-svr4pic-local-irix.d: New
- file.
- * testsuite/gas/mips/r3000@jal-svr4pic-local-irix.d: New file.
- * testsuite/gas/mips/jal-svr4pic-noreorder-irix.d: New file.
- * testsuite/gas/mips/mips1@jal-svr4pic-noreorder-irix.d: New
- file.
- * testsuite/gas/mips/mipsr6@jal-svr4pic-noreorder-irix.d: New
- file.
- * testsuite/gas/mips/micromips@jal-svr4pic-noreorder-irix.d: New
- file.
- * testsuite/gas/mips/r3000@jal-svr4pic-noreorder-irix.d: New
- file.
- * testsuite/gas/mips/jal-xgot-irix.d: New file.
- * testsuite/gas/mips/jalr2-irix.d: New file.
- * testsuite/gas/mips/micromips-branch-relax-insn32-pic-irix.d:
- New file.
- * testsuite/gas/mips/micromips-branch-relax-pic-irix.d: New
- file.
- * testsuite/gas/mips/mips-abi32-pic2-irix.d: New file.
- * testsuite/gas/mips/jal-svr4pic-local.d: Don't exclude
- `*-*-irix*' targets. Add source file designator.
- * testsuite/gas/mips/mips1@jal-svr4pic-local.d: Don't exclude
- `*-*-irix*' targets.
- * testsuite/gas/mips/r3000@jal-svr4pic-local.d: Likewise.
- * testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
- * testsuite/gas/mips/jalr2.d: Add name designator.
- * testsuite/gas/mips/mips.exp: Use respective IRIX variants for
- tests involving the JALR relocation throughout.
-
-2020-07-22 Maciej W. Rozycki <macro@linux-mips.org>
-
- * testsuite/gas/mips/mips.exp: Use a helper variable for
- IRIX/non-IRIX test selection.
-
-2020-07-21 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/evex-no-scale-64.d,
- testsuite/gas/i386/addr32.d,
- testsuite/gas/i386/x86-64-addr32-intel.d,
- testsuite/gas/i386/x86-64-addr32.d: Adjust expectations.
-
-2020-07-21 Cooper Qu <cooper.qu@linux.alibaba.com>
-
- * config/tc-csky.c (md_begin): Fix tests of arch and mach flags.
-
-2020-07-21 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/evex-no-scale-32.d,
- testsuite/gas/i386/evex-no-scale-64.d: Add #source and #pass.
- * testsuite/gas/i386/evex-no-scale-32.s,
- testsuite/gas/i386/evex-no-scale-64.s: Rename / fold into ...
- * testsuite/gas/i386/evex-no-scale.s: ... this. Use .struct
- instead of .section.
- * testsuite/gas/i386/i386.exp: Move above tests out of ELF-
- specific section.
-
-2020-07-21 Maciej W. Rozycki <macro@linux-mips.org>
-
- * config/tc-mips.c (prev_reloc_op_frag): Remove variable.
- (my_getSmallExpression): Adjust accordingly.
-
-2020-07-20 Jan Beulich <jbeulich@suse.com>
-
- PR gas/4572
- * config/tc-i386.c (i386_comment_chars): Drop TE_I386AIX from
- conditional around it.
- (md_begin): Insert backslash into operand_chars[] when slash is
- a comment character.
- * config/tc-i386-intel.c (i386_operator): Recognize \/, \%, and
- \* as operators when / may be a comment character.
- * testsuite/gas/i386/svr4.s, testsuite/gas/i386/svr4.d: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-07-20 Jan Beulich <jbeulich@suse.com>
-
- PR gas/4572
- * app.c (last_char): Drop TC_ARM conditional around it.
- (struct app_save): Drop TC_ARM conditional around last_char.
- (app_push, app_pop): Drop TC_ARM conditional from last_char
- accesses.
- (do_scrub_chars): Likewise. Drop TC_ARM conditional from
- backslash-precedes-comment-character check.
-
-2020-07-20 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (frag_opcode_byte): New.
- (output_branch): Emit error when in absolute section.
- (output_jump, output_insn): Use frag_opcode_byte. Handle being
- in absolute section.
- (output_interseg_jump, output_disp, output_imm): Handle being in
- absolute section.
- * testsuite/gas/i386/sizing.s,
- testsuite/gas/i386/sizing32.d,
- testsuite/gas/i386/sizing64.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-07-20 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/i386.exp: Include *-*-vxworks alongside
- is_elf_format as applicable; merely exclude iamcu tests.
-
-2020-07-19 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26263
- * config/tc-i386.c (i386_validate_fix): Change PLT32 reloc
- against section to PC32 reloc.
- * testsuite/gas/i386/relax-5.d: Updated.
- * testsuite/gas/i386/x86-64-relax-4.d: Likewise.
-
-2020-07-15 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26237
- * testsuite/gas/i386/evex-no-scale-64.d: Updated.
- * testsuite/gas/i386/addr32.d: Likewise.
- * testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-addr32.d: Likewise.
-
-2020-07-15 Nick Clifton <nickc@redhat.com>
-
- * write.c (create_note_reloc): Add desc2_size parameter. Zero out
- the addend field of REL relocations. Store the full addend into
- the note for REL relocations.
-
-2020-07-15 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-stack.s: Adjust 32-bit push
- immediate.
- * testsuite/gas/i386/x86-64-stack-intel.d,
- testsuite/gas/i386/x86-64-stack-suffix.d,
- testsuite/gas/i386/x86-64-stack.d: Adjust expectations.
-
-2020-07-15 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/disassem.d,
- testsuite/gas/i386/ilp32/x86-64-branch.d,
- testsuite/gas/i386/intel.d, testsuite/gas/i386/jump16.d,
- testsuite/gas/i386/lfence-load.d, testsuite/gas/i386/noreg16.d,
- testsuite/gas/i386/noreg32.d,
- testsuite/gas/i386/noreg64-rex64.d,
- testsuite/gas/i386/noreg64.d, testsuite/gas/i386/notrack.d,
- testsuite/gas/i386/opcode.d,
- testsuite/gas/i386/solaris/x86-64-branch-2.d,
- testsuite/gas/i386/solaris/x86-64-jump.d,
- testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d,
- testsuite/gas/i386/solaris/x86-64-nop-3.d,
- testsuite/gas/i386/solaris/x86-64-nop-4.d,
- testsuite/gas/i386/solaris/x86-64-nop-5.d,
- testsuite/gas/i386/solaris/x86-64-relax-2.d,
- testsuite/gas/i386/solaris/x86-64-relax-3.d,
- testsuite/gas/i386/x86-64-align-branch-1a.d,
- testsuite/gas/i386/x86-64-align-branch-1b.d,
- testsuite/gas/i386/x86-64-align-branch-1c.d,
- testsuite/gas/i386/x86-64-align-branch-1d.d,
- testsuite/gas/i386/x86-64-align-branch-1e.d,
- testsuite/gas/i386/x86-64-align-branch-1f.d,
- testsuite/gas/i386/x86-64-align-branch-1g.d,
- testsuite/gas/i386/x86-64-align-branch-1h.d,
- testsuite/gas/i386/x86-64-align-branch-1i.d,
- testsuite/gas/i386/x86-64-align-branch-2a.d,
- testsuite/gas/i386/x86-64-align-branch-2b.d,
- testsuite/gas/i386/x86-64-align-branch-2c.d,
- testsuite/gas/i386/x86-64-align-branch-3.d,
- testsuite/gas/i386/x86-64-align-branch-4a.d,
- testsuite/gas/i386/x86-64-align-branch-4b.d,
- testsuite/gas/i386/x86-64-align-branch-5.d,
- testsuite/gas/i386/x86-64-align-branch-6.d,
- testsuite/gas/i386/x86-64-branch-2.d,
- testsuite/gas/i386/x86-64-branch-3.d,
- testsuite/gas/i386/x86-64-branch.d,
- testsuite/gas/i386/x86-64-disassem.d,
- testsuite/gas/i386/x86-64-disp32.d,
- testsuite/gas/i386/x86-64-gotpcrel-no-relax.d,
- testsuite/gas/i386/x86-64-gotpcrel.d,
- testsuite/gas/i386/x86-64-ifunc.d,
- testsuite/gas/i386/x86-64-jump.d,
- testsuite/gas/i386/x86-64-lfence-byte.d,
- testsuite/gas/i386/x86-64-lfence-indbr-a.d,
- testsuite/gas/i386/x86-64-lfence-indbr-b.d,
- testsuite/gas/i386/x86-64-lfence-indbr-c.d,
- testsuite/gas/i386/x86-64-lfence-load.d,
- testsuite/gas/i386/x86-64-lfence-ret-a.d,
- testsuite/gas/i386/x86-64-lfence-ret-b.d,
- testsuite/gas/i386/x86-64-lfence-ret-c.d,
- testsuite/gas/i386/x86-64-lfence-ret-d.d,
- testsuite/gas/i386/x86-64-lfence-ret-e.d,
- testsuite/gas/i386/x86-64-mpx-add-bnd-prefix.d,
- testsuite/gas/i386/x86-64-mpx-branch-1.d,
- testsuite/gas/i386/x86-64-mpx.d,
- testsuite/gas/i386/x86-64-nop-3.d,
- testsuite/gas/i386/x86-64-nop-4.d,
- testsuite/gas/i386/x86-64-nop-5.d,
- testsuite/gas/i386/x86-64-nops-7.d,
- testsuite/gas/i386/x86-64-notrack.d,
- testsuite/gas/i386/x86-64-opcode.d,
- testsuite/gas/i386/x86-64-relax-2.d,
- testsuite/gas/i386/x86-64-relax-3.d,
- testsuite/gas/i386/x86-64-relax-4.d,
- testsuite/gas/i386/x86-64-rtm.d,
- testsuite/gas/i386/x86-64-stack.d,
- testsuite/gas/i386/x86-64-unique.d,
- testsuite/gas/i386/x86_64-intel.d: Adjust expectations.
-
-2020-07-14 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26237
- * testsuite/gas/i386/addr32.s: Add tests for 32-bit wrapped around
- address.
- * testsuite/gas/i386/x86-64-addr32.s: Likewise.
- * testsuite/gas/i386/addr32.d: Updated.
- * testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-addr32.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/intel.s: Use dr<N> instead of db<N>.
- * testsuite/gas/i386/intel-intel.d: Disambiguate name.
- * testsuite/gas/i386/intel.d,
- testsuite/gas/i386/opcode-intel.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/prefix.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-avx-intel.d,
- testsuite/gas/i386/x86-64-sse4_2-intel.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/movbe-suffix.d,
- testsuite/gas/i386/x86-64-movbe-suffix.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/crc32-suffix.d,
- testsuite/gas/i386/x86-64-crc32-suffix.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
- * testsuite/gas/i386/arch-10-bdver1.d,
- testsuite/gas/i386/arch-10-bdver2.d,
- testsuite/gas/i386/arch-10-bdver3.d,
- testsuite/gas/i386/arch-10-bdver4.d,
- testsuite/gas/i386/arch-10-btver1.d,
- testsuite/gas/i386/arch-10-btver2.d,
- testsuite/gas/i386/arch-10-lzcnt.d,
- testsuite/gas/i386/arch-10-prefetchw.d,
- testsuite/gas/i386/arch-10.d, testsuite/gas/i386/arch-2.d,
- testsuite/gas/i386/arch-3.d, testsuite/gas/i386/arch-5.d,
- testsuite/gas/i386/arch-6.d, testsuite/gas/i386/crc32.d,
- testsuite/gas/i386/sse-noavx.d, testsuite/gas/i386/sse4_2.d,
- testsuite/gas/i386/x86-64-arch-2-bdver1.d,
- testsuite/gas/i386/x86-64-arch-2-bdver2.d,
- testsuite/gas/i386/x86-64-arch-2-bdver3.d,
- testsuite/gas/i386/x86-64-arch-2-bdver4.d,
- testsuite/gas/i386/x86-64-arch-2-btver1.d,
- testsuite/gas/i386/x86-64-arch-2-btver2.d,
- testsuite/gas/i386/x86-64-arch-2-lzcnt.d,
- testsuite/gas/i386/x86-64-arch-2-prefetchw.d,
- testsuite/gas/i386/x86-64-arch-2.d,
- testsuite/gas/i386/x86-64-crc32.d,
- testsuite/gas/i386/x86-64-pseudos.d,
- testsuite/gas/i386/x86-64-sse-noavx.d,
- testsuite/gas/i386/x86-64-sse4_2.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-pseudos.s: Add empty-REX tests for
- ModR/M-encoded byte register cases.
- * testsuite/gas/i386/x86-64-pseudos.d,
- testsuite/gas/i386/x86-64-reg-intel.d,
- testsuite/gas/i386/x86-64-reg.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-pseudos.s: Add empty-REX tests for
- not-ModR/M-encoded byte register cases.
- * testsuite/gas/i386/x86-64-pseudos.d: Adjust expectations.
-
-2020-07-14 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/ilp32/x86-64-arch-1.d,
- testsuite/gas/i386/ilp32/x86-64-arch-2.d,
- testsuite/gas/i386/ilp32/x86-64-avx-intel.d,
- testsuite/gas/i386/ilp32/x86-64-avx.d,
- testsuite/gas/i386/ilp32/x86-64-crc32-intel.d,
- testsuite/gas/i386/ilp32/x86-64-crc32.d,
- testsuite/gas/i386/ilp32/x86-64-gotpcrel.d,
- testsuite/gas/i386/ilp32/x86-64-ifunc.d,
- testsuite/gas/i386/ilp32/x86-64-reg-intel.d,
- testsuite/gas/i386/ilp32/x86-64-reg.d,
- testsuite/gas/i386/ilp32/x86-64-rep-suffix.d,
- testsuite/gas/i386/ilp32/x86-64-sse4_2-intel.d,
- testsuite/gas/i386/ilp32/x86-64-sse4_2.d,
- testsuite/gas/i386/ilp32/x86-64-stack-intel.d,
- testsuite/gas/i386/ilp32/x86-64-stack-suffix.d,
- testsuite/gas/i386/ilp32/x86-64-stack.d: Reference parent dir
- dump expectations.
-
-2020-07-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (offset_in_range): Remove 32-bit sign
- extension.
-
-2020-07-13 Nick Clifton <nickc@redhat.com>
-
- * po/fr.po: Updated French translation.
-
-2020-07-13 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/elf/dwarf2-7.d: Remove most xfails.
- * testsuite/gas/elf/dwarf2-12.d: Likewise.
- * testsuite/gas/elf/dwarf2-13.d: Likewise.
- * testsuite/gas/elf/dwarf2-14.d: Likewise.
-
-2020-07-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_insn): Check i.xstate to set
- GNU_PROPERTY_X86_FEATURE_2_TMM.
- * testsuite/gas/i386/i386.exp: Run x86-64-property-7,
- x86-64-property-8 and x86-64-property-9.
- * testsuite/gas/i386/x86-64-property-7.d: New file.
- * testsuite/gas/i386/x86-64-property-7.s: Likewise.
- * testsuite/gas/i386/x86-64-property-8.d: Likewise.
- * testsuite/gas/i386/x86-64-property-8.s: Likewise.
- * testsuite/gas/i386/x86-64-property-9.d: Likewise.
- * testsuite/gas/i386/x86-64-property-9.s: Likewise.
-
-2020-07-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (_i386_insn): Remove has_regmmx, has_regxmm,
- has_regymm, has_regzmm and has_regtmm. Add xstate.
- (md_assemble): Set i.xstate from operand types in instruction
- template.
- (build_modrm_byte): Updated.
- (output_insn): Check i.xstate.
- * testsuite/gas/i386/i386.exp: Run property-6 and
- x86-64-property-6.
- * testsuite/gas/i386/property-6.d: New file.
- * testsuite/gas/i386/property-6.s: Updated.
- * testsuite/gas/i386/x86-64-property-6.d: Likewise.
-
-2020-07-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/i386/property-5.d: Correct test name.
-
-2020-07-10 Lili Cui <lili.cui@intel.com>
-
- * NEWS: Mention support for Intel AMX instructions.
- * config/tc-i386.c (i386_error): Add invalid_sib_address.
- (cpu_arch): Add .amx_int8, .amx_bf16 and .amx_tile.
- (cpu_noarch): Add noamx_int8, noamx_bf16 and noamx_tile.
- (match_simd_size): Add tmmword check.
- (operand_type_match): Add tmmword.
- (type_names): Add rTMM.
- (i386_error): Add invalid_tmm_register_set.
- (check_VecOperands): Handle invalid_sib_address and
- invalid_tmm_register_set.
- (match_template): Handle invalid_sib_address.
- (build_modrm_byte): Handle non-vector SIB and zmmword.
- (i386_index_check): Disallow RegIP for non-vector SIB.
- (check_register): Handle zmmword.
- * doc/c-i386.texi: Document amx_int8, amx_bf16 and amx_tile.
- * testsuite/gas/i386/i386.exp: Add AMX new tests.
- * testsuite/gas/i386/intel-regs.d: Add tmm.
- * testsuite/gas/i386/intel-regs.s: Add tmm.
- * testsuite/gas/i386/x86-64-amx-intel.d: New.
- * testsuite/gas/i386/x86-64-amx-inval.l: New.
- * testsuite/gas/i386/x86-64-amx-inval.s: New.
- * testsuite/gas/i386/x86-64-amx.d: New.
- * testsuite/gas/i386/x86-64-amx.s: New.
- * testsuite/gas/i386/x86-64-amx-bad.d: New.
- * testsuite/gas/i386/x86-64-amx-bad.s: New.
-
-2020-07-10 Tom de Vries <tdevries@suse.de>
-
- * testsuite/gas/elf/dwarf2-11.d: Update expected output from
- readelf's line table decoding.
- * testsuite/gas/elf/dwarf2-12.d: Likewise.
- * testsuite/gas/elf/dwarf2-13.d: Likewise.
- * testsuite/gas/elf/dwarf2-14.d: Likewise.
- * testsuite/gas/elf/dwarf2-15.d: Likewise.
- * testsuite/gas/elf/dwarf2-16.d: Likewise.
- * testsuite/gas/elf/dwarf2-17.d: Likewise.
- * testsuite/gas/elf/dwarf2-18.d: Likewise.
- * testsuite/gas/elf/dwarf2-19.d: Likewise.
- * testsuite/gas/elf/dwarf2-5.d: Likewise.
- * testsuite/gas/elf/dwarf2-6.d: Likewise.
- * testsuite/gas/elf/dwarf2-7.d: Likewise.
-
-2020-07-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_insn): Set YMM/ZMM features for
- VEX/EVEX vector instructions.
- * testsuite/gas/i386/property-4.d: New file.
- * testsuite/gas/i386/property-4.s: Likewise.
- * testsuite/gas/i386/property-5.d: Likewise.
- * testsuite/gas/i386/property-5.s: Likewise.
- * testsuite/gas/i386/x86-64-property-4.d: Likewise.
- * testsuite/gas/i386/x86-64-property-5.d: Likewise.
-
-2020-07-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention --enable-x86-used-note.
- * configure.ac: Configure with --enable-x86-used-note by default
- for Linux/x86.
- * configure: Regenerated.
-
-2020-07-09 Alan Modra <amodra@gmail.com>
-
- * config/obj-coff.h: Remove TE_PE support.
- * config/tc-ppc.c: Likewise.
- * config/tc-ppc.h: Likewise.
- * configure.tgt: Remove powerpc PE and powerpc lynxos.
- * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE
- condition.
- * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE.
-
-2020-07-08 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/fma4-lig.d, testsuite/gas/i386/xop-lig.d:
- New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-07-07 Claudiu Zissulescu <claziss@synopsys.com>
-
- * config/tc-arc.c (find_opcode_match): Add error messages.
- * testsuite/gas/arc/add_s-err.s: Update test.
- * testsuite/gas/arc/asm-errors.err: Likewise.
- * testsuite/gas/arc/cpu-em-err.s: Likewise.
- * testsuite/gas/arc/hregs-err.s: Likewise.
- * testsuite/gas/arc/warn.s: Likewise.
-
-2020-07-07 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26212
- * doc/c-i386.texi: Remove an incorrect AVX2 entry.
-
-2020-07-07 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/all/gas.exp: Use is_xcoff_format.
- * testsuite/gas/ppc/ppc.exp: Likewise.
- * testsuite/gas/all/weakref1l.d: Likewise.
-
-2020-07-07 Nick Clifton <nickc@redhat.com>
-
- * testsuite/gas/arm/cde-missing-fp.l: Fix spelling mistake in
- expected output.
-
-2020-07-06 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-avx512bw-wig1.d,
- testsuite/gas/i386/x86-64-avx512bw-wig1-intel.d,
- testsuite/gas/i386/x86-64-evex-wig1.d,
- testsuite/gas/i386/x86-64-evex-wig1-intel.d: Adjust
- expectations.
-
-2020-07-06 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/avx512f-opts.s: Add EVEX movq tests.
- * testsuite/gas/i386/x86-64-avx512f-opts.s: Add blank line.
- * testsuite/gas/i386/avx512f-opts-intel.d,
- testsuite/gas/i386/avx512f-opts.d
- testsuite/gas/i386/x86-64-avx512f-opts-intel.d
- testsuite/gas/i386/x86-64-avx512f-opts.d: Adjust expectations.
-
-2020-07-06 Yuri Chornoivan <yurchor@ukr.net>
-
- PR 26204
- * config/tc-arm.c: Fix spelling mistake.
- * config/tc-riscv.c: Likewise.
- * config/tc-z80.c: Likewise.
- * po/gas.pot: Regenerate.
-
-2020-07-06 Nick Clifton <nickc@redhat.com>
-
- * po/uk.po: Updated Ukranian translation.
-
-2020-07-04 Nick Clifton <nickc@redhat.com>
-
- * configure: Regenerate.
- * po/gas.pot: Regenerate.
-
-2020-07-04 Nick Clifton <nickc@redhat.com>
-
- * version.m4: Change version number to 2.35.50.
- * configure: Regenerate.
- * po/bfd.pot: Regenerate.
-
-2020-07-04 Nick Clifton <nickc@redhat.com>
-
- Binutils 2.35 branch created.
-
-2020-07-03 Alan Modra <amodra@gmail.com>
-
- PR 26028
- * testsuite/gas/ia64/unwind-ilp32.d: Add -T to readelf options.
-
-2020-07-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Check vexswapsources to
- swap two source operands.
-
-2020-07-02 Nick Clifton <nickc@redhat.com>
-
- * testsuite/gas/all/fill-1.d: Skip for MeP targets.
-
-2020-07-02 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (reg_name_p): Fix cast so that we don't
- segfault on negative chars.
- * testsuite/gas/aarch64/reglike-label-unicode-segv.d: New test.
- * testsuite/gas/aarch64/reglike-label-unicode-segv.s: Input.
-
-2020-07-02 Nick Clifton <nickc@redhat.com>
-
- PR 26028
- * testsuite/gas/ia64/group-2.d: Add -T option to readelf
- command line.
- * testsuite/gas/ia64/unwind.d: Likewise.
- * testsuite/gas/mmix/bspec-1.d: Likewise.
- * testsuite/gas/mmix/bspec-2.d: Likewise.
- * testsuite/gas/mmix/comment-1.d: Likewise.
- * testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
-
-2020-07-01 Alan Modra <amodra@gmail.com>
-
- * config/tc-xc16x.c (md_apply_fix): Add FIXME.
-
-2020-07-01 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/all/eqv-dot.d: xfail targets that set linkrelax
- in data sections, and mep.
-
-2020-06-30 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention x86 NaCl target support removal.
- * config/tc-i386.c: Remove x86 NaCl target support.
- * config/tc-i386.h: Likewise.
- * configure.tgt: Likewise.
- * testsuite/gas/i386/i386.exp: Likewise.
- * testsuite/gas/i386/iamcu-1.d: Likewise.
- * testsuite/gas/i386/iamcu-2.d: Likewise.
- * testsuite/gas/i386/iamcu-3.d: Likewise.
- * testsuite/gas/i386/iamcu-4.d: Likewise.
- * testsuite/gas/i386/iamcu-5.d: Likewise.
- * testsuite/gas/i386/k1om.d: Likewise.
- * testsuite/gas/i386/l1om.d: Likewise.
-
-2020-06-30 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (riscv_csr_class_check): Removed. Move the
- checking into riscv_csr_address.
- (riscv_csr_version_check): Likewise.
- (riscv_csr_address): New function. Return the suitable CSR address
- after checking the ISA dependency and versions. Issue warnings if
- we find any conflict and -mcsr-check is set. CSR_CLASS_F and
- CSR_CLASS_DEBUG are unprivileged CSR for now, so don't check the
- priv spec versions for them.
- (reg_csr_lookup_internal): Call riscv_csr_address to find the
- suitable CSR address.
- * testsuite/gas/riscv/priv-reg-fail-fext.d: Remove -mpriv-spec=1.11.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-fext.l: We don't care the
- priv spec warnings here. These warnings are added by accident.
- Remove them and only focus on the ISA dependency warnings.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Updated since
- dscratch0 and dscratch1 are regarded as the unprivileged CSR rather
- than the privileged ones.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
- * testsuite/gas/riscv/priv-reg.s: Likewise. Add missing debug CSR.
- * testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
- * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
- * testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
- * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
- * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
- * testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
-
-2020-06-29 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_vex_prefix): Support VEX base opcode
- length > 1.
- (md_assemble): Don't process ImmExt without operands.
-
-2020-06-29 Hans-Peter Nilsson <hp@bitrange.com>
-
- PR gas/25331
- * config/tc-mmix.c (md_assemble) <fixup for
- BFD_RELOC_MMIX_BASE_PLUS_OFFSET>: This fixup affects 1 byte, not 8.
- Also, set its fx_no_overflow.
- (md_convert_frag) <case ENCODE_RELAX (STATE_PUSHJSTUB, STATE_ZERO)>:
- Similarly this fixup affects 4 bytes, not 8 and needs its
- fx_no_overflow set.
- * config/tc-mmix.h (TC_FX_SIZE_SLACK): Don't define.
- * testsuite/gas/mmix/pr25331.d, testsuite/gas/mmix/pr25331.s: New test.
-
-2020-06-29 Alan Modra <amodra@gmail.com>
-
- * config/tc-s12z.c: Use C style comments.
- * config/tc-z80.c: Likewise.
- * config/tc-xtensa.c (emit_ld_r_n): Remove commented out code.
-
-2020-06-26 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Process ImmExt without
- operands.
-
-2020-06-26 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (check_VecOperands): Replace vecsib with sib.
- Replace VecSIB128, VecSIB256 and VecSIB512 with VECSIB128,
- VECSIB256 and VECSIB512, respectively.
- (build_modrm_byte): Replace vecsib with sib.
-
-2020-06-26 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/nop-1-suffix.d: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-06-26 Pat Bernardi <bernardi@adacore.com>
-
- * config/tc-m68k.c (m68k_elf_gnu_attribute): New function.
- (md_pseudo_table): Handle "gnu_attribute".
- * doc/as.texi: Document GNU attribute for M68K.
-
-2020-06-25 Nick Clifton <nickc@redhat.com>
-
- PR 26141
- * config/tc-arm.c (arm_force_relocation): Force resolution of
- BFD_RELOC_THUMB_PCREL_BRANCH12 relocations.
- * testsuite/gas/arm/plt-1.d: Adjust expected disassembly.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Move call to process_immext()
- ...
- (process_operands): ... here.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Skip ambiguous operand size
- diagnostic when there is a sizing prefix. Switch to word/dword/
- qword encoding when there is a sizing prefix and no (explicit or
- derived) suffix.
- (update_imm): Handle presence of a sizing prefix.
- * testsuite/gas/i386/noreg16-data32.d,
- testsuite/gas/i386/noreg32-data16.d,
- testsuite/gas/i386/noreg32-data16.e,
- testsuite/gas/i386/noreg64-data16.d,
- testsuite/gas/i386/noreg64-data16.e,
- testsuite/gas/i386/noreg64-rex64.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
- * testsuite/gas/i386/noreg32.s, testsuite/gas/i386/noreg64.s:
- Introduce and use pfx* macros.
- * testsuite/gas/i386/noreg16.s: Likewise. Replace 32-bit
- addressing.
- * testsuite/gas/i386/noreg16.d: Adjust expectations.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/avx-16bit.d,
- testsuite/gas/i386/avx-scalar.d, testsuite/gas/i386/avx.d,
- testsuite/gas/i386/avx512f-16bit.d,
- testsuite/gas/i386/avx512f.d,
- testsuite/gas/i386/evex-lig256.d,
- testsuite/gas/i386/evex-lig512.d
- testsuite/gas/i386/evex-wig1.d, testsuite/gas/i386/katmai.d,
- testsuite/gas/i386/noreg16.d, testsuite/gas/i386/noreg32.d,
- testsuite/gas/i386/ptwrite.d, testsuite/gas/i386/simd.d,
- testsuite/gas/i386/sse2-16bit.d,
- testsuite/gas/i386/sse2.d, testsuite/gas/i386/sse2avx.d: Adjust
- expectations.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Also reject explicit REX
- prefixes with VEX and alike encoded insns. Zap consumed bits
- from i.rex.
- (output_insn): Don't ignore REX prefix for VEX and alike
- encodings; abort() instead if encountered.
- * testsuite/gas/i386/x86-64-pseudos.s: Move REX-with-VEX cases
- ...
- * testsuite/gas/i386/x86-64-pseudos-bad.s: ... here.
- * testsuite/gas/i386/x86-64-pseudos.d,
- testsuite/gas/i386/x86-64-pseudos-bad.l: Adjust expectations.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_operands): Translate explicit REX
- prefix into i.rex for SSE2AVX templates.
- (set_rex_vrex): New helper.
- (build_modrm_byte): Use it.
- * testsuite/gas/i386/x86-64-sse2avx.s: Add cases with explict
- REX prefixes.
- * testsuite/gas/i386/x86-64-sse2avx.d: Adjust expectations.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (cpu_flags_match): Only match SSE2AVX
- templates when there's no data size prefix.
- (md_assemble): Reject data size prefix also for legacy encoded
- SIMD templates.
- * testsuite/gas/i386/prefix32.s, testsuite/gas/i386/prefix64.s:
- Uncomment previously not working line.
- * testsuite/gas/i386/sse2avx.s: Add ldmxcsr/stmxcsr cases with
- data16 prefix.
- * testsuite/gas/i386/prefix32.l, testsuite/gas/i386/prefix64.l,
- testsuite/gas/i386/sse2avx.d: Adjust expectations.
-
-2020-06-25 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (build_evex_prefix): Drop early setting of
- vec_length.
-
-2020-06-23 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (explicit_priv_attr): Rename explicit_csr to
- explicit_priv_attr. It used to indicate CSR or priv instructions are
- explictly used.
- (riscv_is_priv_insn): Return True if it is a privileged instruction.
- (riscv_ip): Call riscv_is_priv_insn to check whether the instruction
- is privileged or not. If it is, then set explicit_priv_attr to TRUE.
- (riscv_write_out_attrs): Clarification of when to generate the elf
- priv spec attributes.
- * testsuite/gas/riscv/attribute-11.s: Add comments.
- * testsuite/gas/riscv/attribute-14.s: New testcase. Use symbol
- `priv_insn_<n>` to decide which priv instruction is expected to used.
- (<n> is a to e.)
- * testsuite/gas/riscv/attribute-14a.d: Likewise.
- * testsuite/gas/riscv/attribute-14b.d: Likewise.
- * testsuite/gas/riscv/attribute-14c.d: Likewise.
- * testsuite/gas/riscv/attribute-14d.d: Likewise.
- * testsuite/gas/riscv/attribute-14e.d: Likewise.
-
-2020-06-22 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (buf_size, buf): Remove the unused variables.
- (riscv_set_default_priv_spec): Get the priv spec version from the
- priv spec attributes by riscv_get_priv_spec_class_from_numbers.
-
-2020-06-20 Alan Modra <amodra@gmail.com>
-
- * configure.tgt: Set bfd_gas for all SH targets.
-
-2020-06-18 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/arch-13.s: Add alternative VMGEXIT case.
- * testsuite/gas/i386/arch-13.d: Extend -march=. Adjust
- expectations.
-
-2020-06-16 Lili Cui <lili.cui@intel.com>
-
- * config/tc-i386.c (cpu_arch): Correct noavx512_vp2intersect
- cpu_arch to CPU_ANY_VP2INTERSECT_FLAGS.
- * doc/c-i386.texi: Add avx512_vp2intersect.
-
-2020-06-16 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Drop SSE4a from SSE check
- conditional.
- * testsuite/gas/i386/sse-check.s: Adjust comment.
- * testsuite/gas/i386/sse-check-error.l,
- testsuite/gas/i386/sse-check-warn.e,
- testsuite/gas/i386/x86-64-sse-check-error.l: Adjust
- expectations.
-
-2020-06-16 Alan Modra <amodra@gmail.com>
-
- * config/tc-tic30.h: Remove OBJ_AOUT support.
- * configure.tgt: Delete tic30-*-*aout* entry.
-
-2020-06-15 Max Filippov <jcmvbkbc@gmail.com>
-
- * config/tc-xtensa.c (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New
- macros.
- (elf32xtensa_abi): New declaration.
- (option_abi_windowed, option_abi_call0): New enum constants.
- (md_longopts): Add entries for --abi-windowed and --abi-call0.
- (md_parse_option): Add handlers for --abi-windowed and
- --abi-call0.
- (xtensa_add_config_info): Use xtensa_abi_choice instead of
- XSHAL_ABI to format ABI tag.
- * doc/as.texi (Target Xtensa options): Add --abi-windowed and
- --abi-call0 to the list of options.
- * doc/c-xtensa.texi: Add description for options --abi-windowed
- and --abi-call0.
- * testsuite/gas/xtensa/abi-call0.d: New test definition.
- * testsuite/gas/xtensa/abi-windowed.d: New test definition.
- * testsuite/gas/xtensa/abi.s: New test source.
-
-2020-06-14 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26115
- * testsuite/gas/i386/tsxldtrk.d: Replace xsuspldtrk with
- xsusldtrk.
- * testsuite/gas/i386/tsxldtrk.s: Likewise.
- * testsuite/gas/i386/x86-64-tsxldtrk.d: Likewise.
- * testsuite/gas/i386/x86-64-tsxldtrk.s: Likewise.
-
-2020-06-12 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Removed.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
- * testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
-
-2020-06-09 Seth Girvan <snth@snthhacks.com>
-
- * doc/c-avr.texi: Improve wording.
-
-2020-06-09 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-pseudos-bad.s,
- testsuite/gas/i386/x86-64-pseudos-bad.l: New.
-
-2020-06-09 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/prefix.s: Add bogus prefix-with-VEX/EVEX
- encoding tests.
- * testsuite/gas/i386/prefix.d: Adjust expectations.
-
-2020-06-09 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/prefix.s: Add bogus REP / EVEX.W prefix
- with VEX/EVEX encoding tests.
- * testsuite/gas/i386/prefix.d: Adjust expectations.
-
-2020-06-09 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Restrict defaulting to 'q'
- suffix.
- * testsuite/gas/i386/noreg64.s: Add lcall/ljmp cases.
- * testsuite/gas/i386/noreg64.d: Adjust expectations.
- * testsuite/gas/i386/noreg-intel64.d,
- testsuite/gas/i386/noreg-intel64.l,
- testsuite/gas/i386/noreg-intel64.s: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-06-09 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (vex_encoding_error): New enumerator.
- (VEX_check_operands): Rename to VEX_check_encoding. Check
- for vex_encoding_error. Move Imm4 handling ...
- (check_VecOperands): ... here.
- (match_template): Call VEX_check_encoding when there are no
- operands. Split construct calling check_VecOperands and
- VEX_check_encoding (when there are operands).
- (check_register): Don't blindly set vex_encoding_evex.
- * testsuite/gas/i386/pseudos-bad.s,
- testsuite/gas/i386/pseudos-bad.l: New.
- * testsuite/gas/i386/i386.exp: Run new test.
- * testsuite/gas/i386/xmmhi64.s: Drop {vex2}.
-
-2020-06-08 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-arm.c (insns): Add dfb.
- * testsuite/gas/arm/dfb.d: New test.
- * testsuite/gas/arm/dfb.s: Input for test.
-
-2020-06-08 Nick Clifton <nickc@redhat.com>
-
- * testsuite/gas/cfi/cfi-i386-2.d: Skip for PE based targets.
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (pi): Add checks for RegMask and RegBND.
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (check_byte_reg): Drop dead conditional
- around as_bad().
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (check_register): Split RegTR handling, to
- fail recognition also in 64-bit mode as well as with i586 or
- i686 explicitly enabled.
- * testsuite/gas/i386/x86_64.s: Add insns referencing tr<N>.
- * testsuite/gas/i386/x86_64-intel.d,
- testsuite/gas/i386/x86_64.d: Adjust expectations.
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/cfi/cfi-i386-2.d: Adjust expectations.
- * testsuite/gas/cfi/cfi.exp: Run this test.
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (parse_real_register): Add allow_pseudo_reg
- check to %st(N) parsing logic.
- * testsuite/gas/cfi/cfi-i386.s: Set "generic32" arch.
-
-2020-06-08 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (bad_reg): New.
- (check_VecOperations, i386_att_operand, i386_parse_name): Check
- for it.
- (check_register): New, broken out from ...
- (parse_real_register): ... here. Call it.
- (parse_register): Call it, and error upon failure.
- * testsuite/gas/i386/equ-bad.s, testsuite/gas/i386/equ-bad.l,
- testsuite/gas/i386/x86-64-equ-bad.s,
- testsuite/gas/i386/x86-64-equ-bad.l: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-06-06 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_show_usage): Mention -mpower10 and -mpwr10.
- * doc/c-ppc.texi: Likewise.
-
-2020-06-06 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c: Update throughout for reloc renaming.
-
-2020-06-05 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * config/tc-bpf.c (md_apply_fix): Avoid GCC 10 warning
- stringop-overflow.
-
-2020-06-05 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (explicit_csr): New static boolean.
- Used to indicate CSR are explictly used.
- (riscv_ip): Set explicit_csr to TRUE if any CSR is used.
- (riscv_write_out_attrs): If we already have set elf priv
- attributes, then generate them. Otherwise, don't generate
- them when no CSR are used.
- * testsuite/gas/riscv/attribute-01.d: Remove the priv attributes.
- * testsuite/gas/riscv/attribute-02.d: Likewise.
- * testsuite/gas/riscv/attribute-03.d: Likewise.
- * testsuite/gas/riscv/attribute-04.d: Likewise.
- * testsuite/gas/riscv/attribute-05.d: Likewise.
- * testsuite/gas/riscv/attribute-06.d: Likewise.
- * testsuite/gas/riscv/attribute-07.d: Likewise.
- * testsuite/gas/riscv/attribute-08.d: Likewise.
- * testsuite/gas/riscv/attribute-09.d: Likewise.
- * testsuite/gas/riscv/attribute-10.d: Likewise.
- * testsuite/gas/riscv/attribute-unknown.d: Likewise.
- * testsuite/gas/riscv/attribute-11.s: New testcase.
- * testsuite/gas/riscv/attribute-11.d: New testcase. The CSR is
- used, so we should output the ELF priv attributes.
- * testsuite/gas/riscv/attribute-12.d: New testcase. The CSR is
- used, so output the priv attributes according to the -mpriv-spec.
- * testsuite/gas/riscv/attribute-13.d: New testcase. The CSR isn't
- used, so ignore the -mpriv-spec setting.
-
-2020-06-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-ip2k. (ip2k_apply_fix): Pass endianness to
- cgen_get_insn_value.
- * config/tc-xstormy16.c (xstormy16_md_apply_fix): Pass
- endianness to cgen_get_insn_value and cgen_put_insn_value.
-
-2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * config/tc-bpf.c (md_apply_fix): Simplify and avoid using
- cgen_put_insn_value.
-
-2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
- bpf_cgen_cpu_open.
- (md_assemble): Remove no longer needed hack.
-
-2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * cgen.c (gas_cgen_finish_insn): Pass the endianness to
- cgen_put_insn_value.
- (gas_cgen_md_apply_fix): Likewise.
- (gas_cgen_md_apply_fix): Likewise.
- * config/tc-bpf.c (md_apply_fix): Pass data endianness to
- cgen_put_insn_value.
- * config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
- cgen_put_insn_value.
-
-2020-06-04 Alan Modra <amodra@gmail.com>
-
- * testsuite/config/default.exp: Remove global directive outside
- proc body.
- * testsuite/gas/mep/complex-relocs.exp: Likewise.
- * testsuite/gas/microblaze/relax_size.exp: Likewise.
- * testsuite/gas/microblaze/reloc_sym.exp: Likewise.
- * testsuite/gas/mt/relocs.exp: Likewise.
- * testsuite/gas/rx/rx.exp: Likewise.
-
-2020-06-03 Stephen Casner <casner@acm.org>
-
- * doc/c-riscv.texi (RISC-V-Options): Fix non-ASCII apostrophe.
-
-2020-06-02 Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
- Jim Wilson <jimw@sifive.com>
-
- PR 26051
- * doc/c-riscv.texi (RISC-V-Formats): Add missing I format using
- simm12(rs1). Correct S format to use simm12(rs1). Drop SB and B
- formats using simm12(rs1). Correct SB and B to use rs1 and rs2.
- Move B before SB. Move J before UJ.
-
-2020-06-01 Alex Coplan <alex.coplan@arm.com>
-
- * write.c (relax_segment): Fix handling of negative offset when
- relaxing an rs_org frag.
- * testsuite/gas/aarch64/org-neg.d: New test.
- * testsuite/gas/aarch64/org-neg.l: Error output for test.
- * testsuite/gas/aarch64/org-neg.s: Input for test.
- * testsuite/gas/arm/org-neg.d: New test.
- * testsuite/gas/arm/org-neg.l: Error output for test.
- * testsuite/gas/arm/org-neg.s: Input for test.
-
-2020-05-28 Stephen Casner <casner@acm.org>
-
- Fix unexpected failures in gas testsuite for pdp11-aout target.
- These are caused by the PDP11's mix of little-endian octets in
- shorts but shorts in big endian order for long or quad.
-
- * config/tc-pdp11.c (md_number_to_chars): Implement .quad
- * testsuite/gas/all/gas.exp: Select alternate test scripts for
- pdp11, skip octa test completely.
- * testsuite/gas/all/eqv-dot-pdp11.s: Identical to eqv-dot.s
- * testsuite/gas/all/eqv-dot-pdp11.d: Match different octet order.
- * testsuite/gas/all/cond-pdp11.l: Match different octet order.
-
-2020-05-28 Alex Coplan <alex.coplan@arm.com>
-
- * frags.c (frag_grow): Fix comment.
-
-2020-05-27 Stephen Casner <casner@acm.org>
-
- PR gas/26001
- * config/tc-pdp11.c (parse_reg): Distinguish register names from
- symbols that begin with a register name.
- * testsuite/gas/pdp11/pdp11.exp: Add test of such symbols.
- * testsuite/gas/pdp11/pr26001.s: Likewise.
- * testsuite/gas/pdp11/pr26001.d: Likewise.
-
-2020-05-27 Simon Cook <simon.cook@embecosm.com>
-
- * config/tc-riscv.c (riscv_init_csr_hash): NULL initilize next
- pointer when creating struct riscv_csr_extra.
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/i386/align-branch-9.d: Updated for PECOFF.
- * testsuite/gas/i386/inval-avx512f.s: Add .p2align for PECOFF.
- * testsuite/gas/i386/inval-avx512f.l: Updated.
-
-2020-05-26 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
-
- * testsuite/gas/s390/zarch-z13.d: Add regexp checks for vector
- load/store instruction variants with alignment hints.
- * testsuite/gas/s390/zarch-z13.s: Emit new vector load/store
- instruction variants with alignment hints.
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * config/tc-xgate.c (md_apply_fix): Check BFD_RELOC_XGATE_PCREL_X
- instead of R_XGATE_PCREL_X.
- (xgate_parse_operand): Replace R_XGATE_PCREL_X with
- BFD_RELOC_XGATE_PCREL_X.
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * config/tc-visium.c (md_convert_frag): Replace fragP->fr_literal
- with &fragP->fr_literal[0].
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * config/tc-vax.c (md_estimate_size_before_relax): Replace
- fragP->fr_literal with &fragP->fr_literal[0].
- (md_convert_frag): Likewise.
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * config/tc-v850.c (md_convert_frag): Replace fragP->fr_literal
- with &fragP->fr_literal[0].
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * config/tc-crx.c (getreg_image): Change argument type to int.
- (md_convert_frag): Replace fragP->fr_literal with
- &fragP->fr_literal[0].
-
-2020-05-26 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26044
- * onfig/tc-score.c (s3_do_macro_bcmp): Replace overlapping
- sprintf with memmove.
-
-2020-05-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-mcore.c (md_convert_frag): Replace fragP->fr_literal
- with &fragP->fr_literal[0].
-
-2020-05-25 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/26041
- * config/tc-cr16.c (md_assemble): Use memmove to concatenate
- 2 overlapping strings.
-
-2020-05-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-cr16.c (md_convert_frag): Replace fragP->fr_literal
- with &fragP->fr_literal[0].
-
-2020-05-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-csky.c (md_convert_frag): Replace fragp->fr_literal
- with &fragp->fr_literal[0].
- * config/tc-microblaze.c (md_apply_fix): Likewise.
- * config/tc-sh.c (md_convert_frag): Likewise.
-
-2020-05-24 Jim Wilson <jimw@sifive.com>
-
- PR 26025
- * config/tc-riscv.c (riscv_pre_output_hook): Change s type from const
- asection to segT. New locals seg and subseg. Call subseg_set before
- fix_new_exp. Call subseg_set after loop to restore original values.
-
-2020-05-21 Alan Modra <amodra@gmail.com>
-
- * atof-generic.c: Replace "if (x) free (x)" with "free (x)"
- throughout.
- * config/obj-elf.c: Likewise.
- * config/tc-aarch64.c: Likewise.
- * config/tc-arm.c: Likewise.
- * config/tc-m68k.c: Likewise.
- * config/tc-nios2.c: Likewise.
- * config/tc-tic30.c: Likewise.
- * ecoff.c: Likewise.
- * read.c: Likewise.
- * stabs.c: Likewise.
- * symbols.c: Likewise.
- * testsuite/gas/all/test-gen.c: Likewise.
-
-2020-05-20 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
- * config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
- Static variables which are used to set the ISA extensions. You can
- use -march (or ELF build attributes) and -misa-spec to set them,
- respectively.
- (ext_version_hash): The hash table used to handle the extensions
- with versions.
- (init_ext_version_hash): Initialize the ext_version_hash according
- to riscv_ext_version_table.
- (riscv_get_default_ext_version): The callback function of
- riscv_parse_subset_t. According to the choosed ISA spec,
- get the default version for the specific extension.
- (riscv_set_arch): Set the callback function.
- (enum options, struct option md_longopts): Add new option -misa-spec.
- (md_parse_option): Do not call riscv_set_arch for -march. We will
- call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
- to set default_isa_spec class.
- (riscv_after_parse_args): Call init_ext_version_hash to initialize the
- ext_version_hash, and then call riscv_set_arch to set the architecture
- with versions according to default_arch_with_ext.
- * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
- x extensions.
- * testsuite/gas/riscv/attribute-03.d: Likewise.
- * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
- already set it's version to 2p1 by march, so no need to use the default
- 2p2 version. For m-ext, we do not set the version by -march and ELF arch
- attribute, so set the default 2p0 to it. For zicsr, it is not defined in
- ISA spec 2p2, so set 0p0 to it.
- * testsuite/gas/riscv/attribute-10.d: New testcase. The version of
- zicsr is 2p0 according to ISA spec 20191213.
- * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
- (DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
- You can set them by configure options --with-arch and
- --with-isa-spec, respectively.
- (riscv_set_default_isa_spec): New function used to set the
- default ISA spec.
- (md_parse_option): Call riscv_set_default_isa_spec rather than
- call riscv_get_isa_spec_class directly.
- (riscv_after_parse_args): If the -isa-spec is not set, then we
- set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
- calling riscv_set_default_isa_spec.
- * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
- the --with-isa-spec may be set to different ISA spec.
- * testsuite/gas/riscv/attribute-02.d: Likewise.
- * testsuite/gas/riscv/attribute-03.d: Likewise.
- * testsuite/gas/riscv/attribute-04.d: Likewise.
- * testsuite/gas/riscv/attribute-05.d: Likewise.
- * testsuite/gas/riscv/attribute-06.d: Likewise.
- * testsuite/gas/riscv/attribute-07.d: Likewise.
- * configure.ac: Add configure options, --with-arch and
- --with-isa-spec.
- * configure: Regenerated.
- * config.in: Regenerated.
- * config/tc-riscv.c (default_priv_spec): Static variable which is
- used to check if the CSR is valid for the chosen privilege spec. You
- can use -mpriv-spec to set it.
- (enum reg_class): We now get the CSR address from csr_extra_hash rather
- than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
- (riscv_init_csr_hashes): Only need to initialize one hash table
- csr_extra_hash.
- (riscv_csr_class_check): Change the return type to void. Don't check
- the ISA dependency if -mcsr-check isn't set.
- (riscv_csr_version_check): New function. Check and find the CSR address
- from csr_extra_hash, according to default_priv_spec. Report warning
- for the invalid CSR if -mcsr-check is set.
- (reg_csr_lookup_internal): Updated.
- (reg_lookup_internal): Likewise.
- (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
- (enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
- (md_parse_option): Call riscv_set_default_priv_version to set
- default_priv_spec.
- (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
- privilege spec to the newest one.
- (enum riscv_csr_class, struct riscv_csr_extra): Move them to
- include/opcode/riscv.h.
- * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
- to check the ISA dependency for CSR, so fix the spec version by adding
- -mpriv-spec=1.11.
- * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
- version warnings for the test case.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
- Check whether the CSR is valid when privilege version 1.9 is choosed.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
- Check whether the CSR is valid when privilege version 1.9.1 is choosed.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
- Check whether the CSR is valid when privilege version 1.10 is choosed.
- * testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
- Check whether the CSR is valid when privilege version 1.11 is choosed.
- * testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
- * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
- setting. You can set it by configure option --with-priv-spec.
- (riscv_set_default_priv_spec): New function used to set the default
- privilege spec.
- (md_parse_option): Call riscv_set_default_priv_spec rather than
- call riscv_get_priv_spec_class directly.
- (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
- default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
- calling riscv_set_default_priv_spec.
- * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
- the --with-priv-spec may be set to different privilege spec.
- * testsuite/gas/riscv/priv-reg.d: Likewise.
- * configure.ac: Add configure option --with-priv-spec.
- * configure: Regenerated.
- * config.in: Regenerated.
- * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
- explicit_attr. Set it to TRUE if any ELF attribute is found.
- (riscv_set_default_priv_spec): Try to set the default_priv_spec if
- the priv attributes are set.
- (md_assemble): Set the default_priv_spec according to the priv
- attributes when we start to assemble instruction.
- (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
- riscv_write_out_attrs. Update the arch and priv attributes. If we
- don't set the corresponding ELF attributes, then try to output the
- default ones.
- (riscv_set_public_attributes): If any ELF attribute or -march-attr
- options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
- to update the arch and priv attributes.
- (s_riscv_attribute): Make sure all arch and priv attributes are set
- before any instruction.
- * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
- ELF attribute or -march-attr is set. If the priv attributes are not
- set, then try to update them by the default setting (-mpriv-spec or
- --with-priv-spec).
- * testsuite/gas/riscv/attribute-02.d: Likewise.
- * testsuite/gas/riscv/attribute-03.d: Likewise.
- * testsuite/gas/riscv/attribute-04.d: Likewise.
- * testsuite/gas/riscv/attribute-06.d: Likewise.
- * testsuite/gas/riscv/attribute-07.d: Likewise.
- * testsuite/gas/riscv/attribute-08.d: Likewise.
- * testsuite/gas/riscv/attribute-09.d: Likewise.
- * testsuite/gas/riscv/attribute-10.d: Likewise.
- * testsuite/gas/riscv/attribute-unknown.d: Likewise.
- * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
- set by priv attributes must be supported.
- * testsuite/gas/riscv/attribute-05.s: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
- priv attributes according to the -mpriv-spec option.
- * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
- * testsuite/gas/riscv/priv-reg.d: Removed.
- * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
- CSR according to the priv spec 1.9.
- * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
- CSR according to the priv spec 1.9.1.
- * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
- CSR according to the priv spec 1.10.
- * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
- CSR according to the priv spec 1.11.
- * config/tc-riscv.c (md_show_usage): Add descriptions about
- the new GAS options.
- * doc/c-riscv.texi: Likewise.
-
-2020-05-19 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/power9.s <dcbf, dcbfl, dcbflp>: Add tests.
- * testsuite/gas/ppc/power9.d: Likewise.
- * testsuite/gas/ppc/power10.s <dcbf, dcbfps, dcbstps, hwsync, lwsync,
- pause_short, phwsync, plwsync, ptesync, stcisync, stncisync, stsync,
- sync, wait, waitrsv>: Add tests.
- * testsuite/gas/ppc/power10.d: Likewise.
-
-2020-05-19 Alexander Fedotov <alfedotov@gmail.com>
-
- PR 25992
- * config/tc-arm.c : Add arm_ext_v8r feature.
- (it_fsm_post_encode): Check arm_ext_v8r feature.
- (get_aeabi_cpu_arch_from_fset): Check arm_ext_v8r feature.
-
-2020-05-19 Alan Modra <amodra@gmail.com>
-
- * write.c (write_contents): Use bfd_get_filename rather than
- accessing bfd->filename directly. Use bfd_section_name rather
- than accessing section->name directly.
-
-2020-05-19 Alan Modra <amodra@gmail.com>
-
- * symbols.c (local_symbol_make): Init all of lsy_flags.
-
-2020-05-18 Alan Modra <amodra@gmail.com>
-
- * symbols.c (resolve_symbol_value): Invoke LOCAL_SYMBOL_CHECK
- before looking at add_symbol->sy_flags.
-
-2020-05-18 Hongtao Liu <hongtao.liu@intel.com>
-
- * config/tc-i386.c: Not handle lret/iret.
- * testsuite/gas/i386/lfence-ret-a.d: Adjust testcase.
- * testsuite/gas/i386/lfence-ret-b.d: Ditto.
- * testsuite/gas/i386/lfence-ret-c.d: Ditto.
- * testsuite/gas/i386/lfence-ret-d.d: Ditto.
- * testsuite/gas/i386/lfence-ret.s: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret-a.d: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret-b.d: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret-c.d: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret-d.d: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret-e.d: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret.s: Ditto.
- * testsuite/gas/i386/x86-64-lfence-ret.e: Deleted.
-
-2020-05-15 Alan Modra <amodra@gmail.com>
- Alex Coplan <alex.coplan@arm.com>
-
- * symbols.c (struct local_symbol): Update comment.
- (resolve_symbol_value): For resolved symbols equated to other
- symbols, verify that the referenced symbol is not a local_symbol
- before accessing sy_value. Don't leave symbol loops during
- finalize_syms resolution.
- * testsuite/gas/all/assign-bad-recursive.d: New test.
- * testsuite/gas/all/assign-bad-recursive.l: Error output for test.
- * testsuite/gas/all/assign-bad-recursive.s: Assembly for test.
- * testsuite/gas/all/gas.exp: Run it.
-
-2020-05-14 Nick Clifton <nickc@redhat.com>
-
- * po/sv.po: Updated Swedish translation.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/scalarquad.d,
- * testsuite/gas/ppc/scalarquad.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/rightmost.d,
- * testsuite/gas/ppc/rightmost.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/xvtlsbb.d,
- * testsuite/gas/ppc/xvtlsbb.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/stringop.d,
- * testsuite/gas/ppc/stringop.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/set_bool.d,
- * testsuite/gas/ppc/set_bool.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/bitmanip.d,
- * testsuite/gas/ppc/bitmanip.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/genpcv.d,
- * testsuite/gas/ppc/genpcv.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/maskmanip.d,
- * testsuite/gas/ppc/maskmanip.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
- Peter Bergner <bergner@linux.ibm.com>
-
- * config/tc-ppc.c (pre_defined_registers): Add accumulators.
- (md_assemble): Check acc specified in correct operand.
- * testsuite/gas/ppc/outerprod.d,
- * testsuite/gas/ppc/outerprod.s,
- * testsuite/gas/ppc/vsx4.d,
- * testsuite/gas/ppc/vsx4.s: New tests.
- * testsuite/gas/ppc/ppc.exp: Run them.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/simd_perm.d,
- * testsuite/gas/ppc/simd_perm.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/int128.d,
- * testsuite/gas/ppc/int128.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/vsx_32byte.d,
- * testsuite/gas/ppc/vsx_32byte.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/ppc/vec_mul.s,
- * testsuite/gas/ppc/vec_mul.d: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/byte_rev.d,
- * testsuite/gas/ppc/byte_rev.s: New test.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/power10.d: Add paste. tests.
- * testsuite/gas/ppc/power10.s: Likewise.
-
-2020-05-11 Peter Bergner <bergner@linux.ibm.com>
-
- * testsuite/gas/ppc/power10.s: New test.
- * testsuite/gas/ppc/power10.d: Likewise.
- * testsuite/gas/ppc/ppc.exp: Run it.
-
-2020-05-11 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
- renaming.
- * testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
- place of -mfuture/-Mfuture.
- * testsuite/gas/ppc/prefix-pcrel.d: Likewise.
- * testsuite/gas/ppc/prefix-reloc.d: Likewise.
-
-2020-05-06 Nick Clifton <nickc@redhat.com>
-
- * po/sv.po: Updated Swedish translation.
-
-2020-05-06 Nick Clifton <nickc@redhat.com>
-
- PR 25927
- * doc/as.texi (Preprocessing): Replace cross reference to not
- existant document with a URL to the equivalent page in the GCC
- manual.
-
-2020-05-05 Nick Clifton <nickc@redhat.com>
-
- * dwarf2dbg.c (out_dir_and_file_list): Add comments describing the
- construction of a DWARF-5 directory name table.
- * testsuite/gas/elf/pr25917.d: Update expected output.
-
-2020-05-05 Gunther Nikl <gnikl@justmail.de>
-
- * config/tc-rx.c (elf_flags): Initialize for non-linux targets.
- (md_parse_option): Remove initialization of elf_flags.
-
-2020-05-04 Andre Vieira <andre.simoesdiasvieira@arm.com>
-
- PR gas/25863
- * config/tc-arm.c (do_mve_vmull): Fix scalar and NEON parsing of vmul.
- * testsuite/gas/arm/mve-scalar-vmult-it.d: New test.
- * testsuite/gas/arm/mve-scalar-vmult-it.s: New test.
-
-2020-05-04 Nick Clifton <nickc@redhat.com>
-
- PR 25917
- * dwarf2dbg.c (out_dir_and_file_list): Check for the directory
- table's existence before looking at its entries.
- Also do not emit a default directory entry if there are no
- directories in use.
-
- * testsuite/gas/elf/pr25917.s: New test source file.
- * testsuite/gas/elf/pr25917.d: New test driver.
- * testsuite/gas/elf/elf.exp (run_elf_list_test): Run the new test.
-
-2020-04-30 Alex Coplan <alex.coplan@arm.com>
-
- * config/tc-aarch64.c (fix_insn): Implement for
- AARCH64_OPND_UNDEFINED.
- (parse_operands): Implement for AARCH64_OPND_UNDEFINED.
- * testsuite/gas/aarch64/udf.s: New.
- * testsuite/gas/aarch64/udf.d: New.
- * testsuite/gas/aarch64/udf-invalid.s: New.
- * testsuite/gas/aarch64/udf-invalid.l: New.
- * testsuite/gas/aarch64/udf-invalid.d: New.
-
-2020-04-30 Yoshinori Sato <ysato@users.sourceforge.jp>
-
- * config/tc-rx.c (elf_flags): Reset default value.
- (md_parse_option): For rx-elf Initialize elf_flags with RX_ABI.
-
-2020-04-29 Max Filippov <jcmvbkbc@gmail.com>
-
- * config/tc-xtensa.c (XTENSA_MARCH_EARLIEST): Define macro as 0
- if it's not defined.
- (microarch_earliest): New static variable.
- (xg_translate_idioms): Translate "simcall" to "simcall 0" when
- simcall opcode has mandatory parameter.
- (xg_init_global_config): Initialize microarch_earliest.
-
-2020-04-29 Nick Clifton <nickc@redhat.com>
-
- PR 22699
- * config/tc-sh.c (build_Mytes): Change operand type IMM0_8 to
- IMM0_8S and add support for IMM0_8U.
- * testsuite/gas/sh/sh4a.s: Add test of a logical insn using an
- unsigned 8-bit immediate.
- * testsuite/gas/sh/sh4a.d: Extended expected disassembly.
- * testsuite/gas/sh/sh4al-dsp.d: Update expected disassembly.
-
-2020-04-27 Tamar Christina <tamar.christina@arm.com>
-
- * NEWS: Add news entry for big-obj.
- * config/tc-i386.c (i386_target_format): Support new format.
- * doc/c-i386.texi: Add i386 support.
- * testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
- * testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
-
-2020-04-27 Nick Clifton <nickc@redhat.com>
-
- PR 25878
- * dwarf2dbg.c (struct file_entry): Add auto_assigned field.
- (assign_file_to_slot): New function. Fills in an entry in the
- files table.
- (allocate_filenum): Use new function.
- (allocate_filename_to_slot): Use new function. If the specified
- slot entry is already in use, but was chosen automatically then
- reassign the automatic entry.
-
-2020-04-26 Hongtao Liu <hongtao.liu@intel.com
-
- * config/tc-i386.c (lfence_before_ret_shl): New member.
- (load_insn_p): implict load for POP/POPA/POPF/XLATB, no load
- for Anysize insns.
- (insert_after_load): Issue warning for REP CMPS/SCAS.
- (insert_before_before): Handle iret, Handle
- -mlfence-before-ret=shl, Adjust operand size of or/not/shl to ret's,
- (md_parse_option): Change -mlfence-before-ret=[none|not|or] to
- -mlfence-before-ret=[none/not/or/shl/yes].
- Enable -mlfence-before-ret=shl when
- -mlfence-beofre-indirect-branch=all and no explict -mlfence-before-ret option.
- (md_show_usage): Ditto.
- * doc/c-i386.texi: Ditto.
- * testsuite/gas/i386/i386.exp: Add new testcases.
- * testsuite/gas/i386/lfence-load-b.d: New.
- * testsuite/gas/i386/lfence-load-b.e: New.
- * testsuite/gas/i386/lfence-load.d: Modified.
- * testsuite/gas/i386/lfence-load.e: New.
- * testsuite/gas/i386/lfence-load.s: Modified.
- * testsuite/gas/i386/lfence-ret-a.d: Modified.
- * testsuite/gas/i386/lfence-ret-b.d: Modified.
- * testsuite/gas/i386/lfence-ret-c.d: New.
- * testsuite/gas/i386/lfence-ret-d.d: New.
- * testsuite/gas/i386/lfence-ret.s: Modified.
- * testsuite/gas/i386/x86-64-lfence-load-b.d: New.
- * testsuite/gas/i386/x86-64-lfence-load.d: Modified.
- * testsuite/gas/i386/x86-64-lfence-load.s: Modified.
- * testsuite/gas/i386/x86-64-lfence-ret-a.d: Modified.
- * testsuite/gas/i386/x86-64-lfence-ret-b.d: Modified.
- * testsuite/gas/i386/x86-64-lfence-ret-c.d: New.
- * testsuite/gas/i386/x86-64-lfence-ret-d.d: New
- * testsuite/gas/i386/x86-64-lfence-ret-e.d: New.
- * testsuite/gas/i386/x86-64-lfence-ret.e: New.
- * testsuite/gas/i386/x86-64-lfence-ret.s: New.
-
-2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
-
- PR ld/25861
- * config/tc-xtensa.c (md_apply_fix): Replace
- BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
- BFD_RELOC_XTENSA_PDIFF{8,16,32} and
- BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
- * testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
- with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
-
-2020-04-22 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c (elf_frob_symbol): Unconditionally remove
- symbol for ".symver .. remove".
- * doc/as.texi (.symver): Update.
- * testsuite/gas/symver/symver11.s: Make foo weak.
- * testsuite/gas/symver/symver11.d: Expect an error.
- * testsuite/gas/symver/symver7.d: Allow other random symbols.
-
-2020-04-21 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/symver/symver11.s: Add ".balign 8".
-
-2020-04-21 Andreas Schwab <schwab@linux-m68k.org>
-
- PR 25848
- * testsuite/gas/m68k/operands.s: Add tests for cmpi.
- * testsuite/gas/m68k/operands.d: Update.
- * testsuite/gas/m68k/op68000.d: Update for new error messages.
-
-2020-04-21 Tamar Christina <tamar.christina@arm.com>
-
- PR binutils/24753
- * testsuite/gas/arm/pr24753.d: New test.
- * testsuite/gas/arm/pr24753.s: New test.
-
-2020-04-21 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/23840
- PR gas/25295
- * NEWS: Mention .symver extension.
- * config/obj-elf.c (obj_elf_find_and_add_versioned_name): New
- function.
- (obj_elf_symver): Call obj_elf_find_and_add_versioned_name to
- add a version name. Add local, hidden and remove visibility
- support.
- (elf_frob_symbol): Handle the list of version names. Update the
- original symbol to local, hidden or remove it from the symbol
- table.
- (elf_frob_file_before_adjust): Handle the list of version names.
- * config/obj-elf.h (elf_visibility): New.
- (elf_versioned_name_list): Likewise.
- (elf_obj_sy): Change local to bitfield. Add rename, bad_version
- and visibility. Change versioned_name pointer to struct
- elf_versioned_name_list.
- * doc/as.texi: Update .symver directive.
- * testsuite/gas/symver/symver.exp: Run all *.d tests. Add more
- error checking tests.
- * testsuite/gas/symver/symver6.d: New file.
- * testsuite/gas/symver/symver7.d: Likewise.
- * testsuite/gas/symver/symver7.s: Likewise.
- * testsuite/gas/symver/symver8.d: Likewise.
- * testsuite/gas/symver/symver8.s: Likewise.
- * testsuite/gas/symver/symver9.s: Likewise.
- * testsuite/gas/symver/symver9a.d: Likewise.
- * testsuite/gas/symver/symver9b.d: Likewise.
- * testsuite/gas/symver/symver10.s: Likewise.
- * testsuite/gas/symver/symver10a.d: Likewise.
- * testsuite/gas/symver/symver10b.d: Likewise.
- * testsuite/gas/symver/symver11.d: Likewise.
- * testsuite/gas/symver/symver11.s: Likewise.
- * testsuite/gas/symver/symver12.d: Likewise.
- * testsuite/gas/symver/symver12.s: Likewise.
- * testsuite/gas/symver/symver13.d: Likewise.
- * testsuite/gas/symver/symver13.s: Likewise.
- * testsuite/gas/symver/symver14.d: Likewise.
- * testsuite/gas/symver/symver14.l: Likewise.
- * testsuite/gas/symver/symver15.d: Likewise.
- * testsuite/gas/symver/symver15.l: Likewise.
- * testsuite/gas/symver/symver6.l: Removed.
- * testsuite/gas/symver/symver6.s: Updated.
-
-2020-04-20 Sudakshina Das <sudi.das@arm.com>
-
- * config/tc-aarch64.c (parse_barrier_psb): Update error messages
- to include TSB.
- * testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests.
- * testsuite/gas/aarch64/system-2.s: Add new tsb tests.
- * testsuite/gas/aarch64/system.d: Update.
-
-2020-04-20 Sudakshina Das <sudi.das@arm.com>
-
- * testsuite/gas/aarch64/bti.d: Update -march option.
- * testsuite/gas/aarch64/illegal-bti.d: Remove.
- * testsuite/gas/aarch64/illegal-bti.l: Remove.
- * testsuite/gas/aarch64/illegal-ras-1.l: Remove esb.
- * testsuite/gas/aarch64/illegal-ras-1.s: Remove esb.
-
-2020-04-17 Alan Modra <amodra@gmail.com>
-
- * config/tc-bfin.h (TC_EQUAL_IN_INSN): Allow assignment to dot.
-
-2020-04-16 Gagan Singh Sidhu <broly@mac.com>
- Nick Clifton <nickc@redhat.com>
-
- PR 25803
- * config/obj-elf.c (obj_elf_type): Reject ifunc symbols on MIPS
- targets.
- * testsuite/gas/elf/elf.exp: Add MIPS targets to the list to skip
- for the type-2 test.
- * testsuite/gas/elf/type-noifunc.e: Update to allow for MIPS
- targets running this test.
-
-2020-02-16 David Faust <david.faust@oracle.com>
-
- * testsuite/gas/bpf/bpf.exp: Run jump32 tests.
- * testsuite/gas/bpf/jump32.s: New file.
- * testsuite/gas/bpf/jump32.d: Likewise.
-
-2020-04-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Correct -mlfence-before-indirect-branch=
- documentation.
-
-2020-04-08 Gunther Nikl <gnikl@justmail.de>
-
- * config/tc-moxie.h (MD_PCREL_FROM_SECTION): Delete define.
- (md_pcrel_from): Remove prototytpe.
- * config/tc-m32c.h (MD_PCREL_FROM_SECTION): Delete duplicate
- define.
- (md_pcrel_from_section): Remove duplicate prototype.
- * tc.h (md_pcrel_from_section): Add prototype.
- * config/tc-aarch64.h (md_pcrel_from_section): Remove prototype.
- * config/tc-arc.h (md_pcrel_from_section): Likewise.
- * config/tc-arm.h (md_pcrel_from_section): Likewise.
- * config/tc-avr.h (md_pcrel_from_section): Likewise.
- * config/tc-bfin.h (md_pcrel_from_section): Likewise.
- * config/tc-bpf.h (md_pcrel_from_section): Likewise.
- * config/tc-csky.h (md_pcrel_from_section): Likewise.
- * config/tc-d10v.h (md_pcrel_from_section): Likewise.
- * config/tc-d30v.h (md_pcrel_from_section): Likewise.
- * config/tc-epiphany.h (md_pcrel_from_section): Likewise.
- * config/tc-fr30.h (md_pcrel_from_section): Likewise.
- * config/tc-frv.h (md_pcrel_from_section): Likewise.
- * config/tc-iq2000.h (md_pcrel_from_section): Likewise.
- * config/tc-lm32.h (md_pcrel_from_section): Likewise.
- * config/tc-m32c.h (md_pcrel_from_section): Likewise.
- * config/tc-m32r.h (md_pcrel_from_section): Likewise.
- * config/tc-mcore.h (md_pcrel_from_section): Likewise.
- * config/tc-mep.h (md_pcrel_from_section): Likewise.
- * config/tc-metag.h (md_pcrel_from_section): Likewise.
- * config/tc-microblaze.h (md_pcrel_from_section): Likewise.
- * config/tc-mmix.h (md_pcrel_from_section): Likewise.
- * config/tc-moxie.h (md_pcrel_from_section): Likewise.
- * config/tc-msp430.h (md_pcrel_from_section): Likewise.
- * config/tc-mt.h (md_pcrel_from_section): Likewise.
- * config/tc-or1k.h (md_pcrel_from_section): Likewise.
- * config/tc-ppc.h (md_pcrel_from_section): Likewise.
- * config/tc-rl78.h (md_pcrel_from_section): Likewise.
- * config/tc-rx.h (md_pcrel_from_section): Likewise.
- * config/tc-s390.h (md_pcrel_from_section): Likewise.
- * config/tc-sh.h (md_pcrel_from_section): Likewise.
- * config/tc-xc16x.h (md_pcrel_from_section): Likewise.
- * config/tc-xstormy16.h (md_pcrel_from_section): Likewise.
- * config/tc-microblaze.h (md_begin, md_assemble, md_undefined_symbol,
- md_show_usage, md_convert_frag, md_operand, md_number_to_chars,
- md_estimate_size_before_relax, md_section_align, tc_gen_reloc,
- md_apply_fix3): Delete prototypes.
-
-2020-04-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention support for Intel SERIALIZE and TSXLDTRK
- instructions.
-
-2020-04-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-z80.texi: Fix @xref warnings.
-
-2020-04-07 Lili Cui <lili.cui@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .TSXLDTRK.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document TSXLDTRK.
- * testsuite/gas/i386/i386.exp: Run TSXLDTRK tests.
- * testsuite/gas/i386/tsxldtrk.d: Likewise.
- * testsuite/gas/i386/tsxldtrk.s: Likewise.
- * testsuite/gas/i386/x86-64-tsxldtrk.d: Likewise.
-
-2020-04-02 Lili Cui <lili.cui@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .serialize.
- (cpu_noarch): Likewise.
- * doc/c-i386.texi: Document serialize.
- * testsuite/gas/i386/i386.exp: Run serialize tests
- * testsuite/gas/i386/serialize.d: Likewise.
- * testsuite/gas/i386/x86-64-serialize.d: Likewise.
- * testsuite/gas/i386/serialize.s: Likewise.
-
-2020-04-02 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
-
- * testsuite/gas/elf/section12a.d: Use notarget instead of xfail.
- * testsuite/gas/elf/section12b.d: Likewise.
- * testsuite/gas/elf/section16a.d: Likewise.
- * testsuite/gas/elf/section16b.d: Likewise.
-
-2020-04-02 Gunther Nikl <gnikl@justmail.de>
-
- * config/tc-m68k.c (m68k_ip): Fix range check for index register
- with a suppressed address register.
-
-2020-04-01 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25756
- * config/tc-i386.h (TC_FORCE_RELOCATION_ABS): New.
- * testsuite/gas/i386/localpic.s: Add a test for relocation
- against local absolute symbol.
- * testsuite/gas/i386/x86-64-localpic.s: Likewise.
- * testsuite/gas/i386/localpic.d: Updated.
- * testsuite/gas/i386/x86-64-localpic.d: Likewise.
- * testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise.
-
-2020-04-01 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
-
- PR gas/25732
- * testsuite/gas/i386/solaris/x86-64-branch-2.d: New file.
- * testsuite/gas/i386/solaris/x86-64-branch-3.d: New file.
- * testsuite/gas/i386/solaris/x86-64-jump.d: Incorporate changes to
- testsuite/gas/i386/x86-64-jump.d.
- * testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d:
- Incorporate changes to
- gas/testsuite/gas/i386/x86-64-mpx-branch-1.d.
- * testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d : Incorporate
- changes to testsuite/gas/i386/x86-64-mpx-branch-2.d.
- * testsuite/gas/i386/x86-64-branch-2.d: Skip on *-*-solaris*.
- * testsuite/gas/i386/x86-64-branch-3.d: Likewise.
-
-2020-03-31 Maciej W. Rozycki <macro@linux-mips.org>
-
- PR 25611
- PR 25614
- * dwarf2dbg.c: Do not include "bignum.h".
-
-2020-03-30 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/alias-csr.d: Move this to priv-reg-pseudo.
- * testsuite/gas/riscv/alias-csr.s: Likewise.
- * testsuite/gas/riscv/no-aliases-csr.d: Move this
- to priv-reg-pseudo-noalias.
- * testsuite/gas/riscv/bad-csr.d: Rename to priv-reg-fail-nonexistent.
- * testsuite/gas/riscv/bad-csr.l: Likewise.
- * testsuite/gas/riscv/bad-csr.s: Likewise.
- * testsuite/gas/riscv/satp.d: Removed. Already included in priv-reg.
- * testsuite/gas/riscv/satp.s: Likewise.
- * testsuite/gas/riscv/priv-reg-pseudo.d: New testcase for all pseudo
- csr instruction, including alias-csr testcase.
- * testsuite/gas/riscv/priv-reg-pseudo.s: Likewise.
- * testsuite/gas/riscv/priv-reg-pseudo-noalias.d: New testcase for all
- pseudo instruction with objdump -Mno-aliases.
- * testsuite/gas/riscv/priv-reg-fail-nonexistent.d: New testcase.
- * testsuite/gas/riscv/priv-reg-fail-nonexistent.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-nonexistent.s: Likewise.
- * testsuite/gas/riscv/priv-reg.d: Update CSR to 1.11.
- * testsuite/gas/riscv/priv-reg.s: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
- * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
- * testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
-
-2020-03-25 J.W. Jagersma <jwjagersma@gmail.com>
-
- * config/obj-coff.c (obj_coff_section): Set the bss flag on
- sections with the "b" attribute.
-
-2020-03-22 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/s12z/truncated.d: Update expected output.
-
-2020-03-17 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25690
- * config/tc-z80.c (md_pseudo_table): Add xdef anf xref pseudo ops.
- * doc/c-z80.texi: Update documentation.
-
-2020-03-17 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25641
- PR 25668
- PR 25633
- Fix disassembling ED+A4/AC/B4/BC opcodes.
- Fix assembling lines containing colonless label and instruction
- with first operand inside parentheses.
- Fix registration of unsupported by target CPU registers.
- * config/tc-z80.c: See above.
- * config/tc-z80.h: See above.
- * testsuite/gas/z80/colonless.d: Update test.
- * testsuite/gas/z80/colonless.s: Likewise.
- * testsuite/gas/z80/ez80_adl_all.d: Likewise.
- * testsuite/gas/z80/ez80_unsup_regs.d: Likewise.
- * testsuite/gas/z80/ez80_z80_all.d: Likewise.
- * testsuite/gas/z80/gbz80_unsup_regs.d: Likewise.
- * testsuite/gas/z80/r800_unsup_regs.d: Likewise.
- * testsuite/gas/z80/unsup_regs.s: Likewise.
- * testsuite/gas/z80/z180_unsup_regs.d: Likewise.
- * testsuite/gas/z80/z80.exp: Likewise.
- * testsuite/gas/z80/z80_strict_unsup_regs.d: Likewise.
- * testsuite/gas/z80/z80_unsup_regs.d: Likewise.
- * testsuite/gas/z80/z80n_unsup_regs.d: Likewise.
-
-2020-03-13 Andre Vieira <andre.simoesdiasvieira@arm.com>
-
- PR 25660
- * config/tc-arm.c (operand_parse_code): Add OP_RNSDMQR and OP_oRNSDMQ.
- (parse_operands): Handle new operand codes.
- (do_neon_dyadic_long): Make shape check accept the scalar variants.
- (asm_opcode_insns): Fix operand codes for vaddl and vsubl.
- * testsuite/gas/arm/mve-vaddsub-it.s: New test.
- * testsuite/gas/arm/mve-vaddsub-it.d: New test.
- * testsuite/gas/arm/mve-vaddsub-it-bad.s: New test.
- * testsuite/gas/arm/mve-vaddsub-it-bad.l: New test.
- * testsuite/gas/arm/mve-vaddsub-it-bad.d: New test.
- * testsuite/gas/arm/nomve-vaddsub-it.d: New test.
-
-2020-03-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention x86 assembler options for CVE-2020-0551.
-
-2020-03-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/i386/i386.exp: Run new tests.
- * testsuite/gas/i386/lfence-byte.d: New file.
- * testsuite/gas/i386/lfence-byte.e: Likewise.
- * testsuite/gas/i386/lfence-byte.s: Likewise.
- * testsuite/gas/i386/lfence-indbr-a.d: Likewise.
- * testsuite/gas/i386/lfence-indbr-b.d: Likewise.
- * testsuite/gas/i386/lfence-indbr-c.d: Likewise.
- * testsuite/gas/i386/lfence-indbr.e: Likewise.
- * testsuite/gas/i386/lfence-indbr.s: Likewise.
- * testsuite/gas/i386/lfence-load.d: Likewise.
- * testsuite/gas/i386/lfence-load.s: Likewise.
- * testsuite/gas/i386/lfence-ret-a.d: Likewise.
- * testsuite/gas/i386/lfence-ret-b.d: Likewise.
- * testsuite/gas/i386/lfence-ret.s: Likewise.
- * testsuite/gas/i386/x86-64-lfence-byte.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-byte.e: Likewise.
- * testsuite/gas/i386/x86-64-lfence-byte.s: Likewise.
- * testsuite/gas/i386/x86-64-lfence-indbr-a.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-indbr-b.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-indbr-c.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-indbr.e: Likewise.
- * testsuite/gas/i386/x86-64-lfence-indbr.s: Likewise.
- * testsuite/gas/i386/x86-64-lfence-load.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-load.s: Likewise.
- * testsuite/gas/i386/x86-64-lfence-ret-a.d: Likewise.
- * testsuite/gas/i386/x86-64-lfence-ret-b.d: Likewise.
-
-2020-03-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (lfence_after_load): New.
- (lfence_before_indirect_branch_kind): New.
- (lfence_before_indirect_branch): New.
- (lfence_before_ret_kind): New.
- (lfence_before_ret): New.
- (last_insn): New.
- (load_insn_p): New.
- (insert_lfence_after): New.
- (insert_lfence_before): New.
- (md_assemble): Call insert_lfence_before and insert_lfence_after.
- Set last_insn.
- (OPTION_MLFENCE_AFTER_LOAD): New.
- (OPTION_MLFENCE_BEFORE_INDIRECT_BRANCH): New.
- (OPTION_MLFENCE_BEFORE_RET): New.
- (md_longopts): Add -mlfence-after-load=,
- -mlfence-before-indirect-branch= and -mlfence-before-ret=.
- (md_parse_option): Handle -mlfence-after-load=,
- -mlfence-before-indirect-branch= and -mlfence-before-ret=.
- (md_show_usage): Display -mlfence-after-load=,
- -mlfence-before-indirect-branch= and -mlfence-before-ret=.
- (i386_cons_align): New.
- * config/tc-i386.h (i386_cons_align): New.
- (md_cons_align): New.
- * doc/c-i386.texi: Document -mlfence-after-load=,
- -mlfence-before-indirect-branch= and -mlfence-before-ret=.
-
-2020-03-11 Nick Clifton <nickc@redhat.com>
-
- PR 25611
- PR 25614
- * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
- (DWARF2_FILE_SIZE_NAME): Default to -1.
- (DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
- whichever is higher.
- (DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
- (NUM_MD5_BYTES): Define.
- (struct file entry): Add md5 field.
- (get_filenum): Delete and replace with...
- (get_basename): New function.
- (get_directory_table_entry): New function.
- (allocate_filenum): New function.
- (allocate_filename_to_slot): New function.
- (dwarf2_where): Use new functions.
- (dwarf2_directive_filename): Add support for extended .file
- pseudo-op.
- (dwarf2_directive_loc): Allow the use of file number zero with
- DWARF 5 or higher.
- (out_file_list): Rename to...
- (out_dir_and_file_list): Add DWARF 5 support.
- (out_debug_line): Emit extra values into the section header for
- DWARF 5.
- (out_debug_str): Allow for file 0 to be used with DWARF 5.
- * doc/as.texi (.file): Update the description of this pseudo-op.
- * testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
- * testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
- * testsuite/gas/lns/lns-diag-1.l: Update expected error message.
- * NEWS: Mention the new feature.
-
-2020-03-10 Alan Modra <amodra@gmail.com>
-
- * config/tc-csky.c (get_operand_value): Rewrite 1 << 31 expressions
- to avoid signed overflow.
- * config/tc-mcore.c (md_assemble): Likewise.
- * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Likewise.
- * config/tc-nds32.c (SET_ADDEND): Likewise.
- * config/tc-nios2.c (nios2_assemble_arg_R): Likewise.
-
-2020-03-09 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/avx.s: Add long-form VCMP[PS][SD] pseudos.
- * testsuite/gas/i386/avx.d, testsuite/gas/i386/avx-16bit.d,
- testsuite/gas/i386/avx-intel.d: Adjust expectations.
-
-2020-03-07 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/elf/dwarf-5-file0.s: Don't start directives in
- first column.
-
-2020-03-06 Nick Clifton <nickc@redhat.com>
-
- PR 25614
- * dwarf2dbg.c (dwarf2_directive_filename): Allow a file number of
- 0 if the dwarf_level is 5 or more. Complain if a filename follows
- a file 0.
- * testsuite/gas/elf/dwarf-5-file0.s: New test.
- * testsuite/gas/elf/dwarf-5-file0.d: New test driver.
- * testsuite/gas/elf/elf.exp: Run the new test.
-
- PR 25612
- * config/tc-ia64.h (DWARF2_VERISION): Fix typo.
- * doc/as.texi: Fix another typo.
-
-2020-03-06 Nick Clifton <nickc@redhat.com>
-
- PR 25612
- * as.c (dwarf_level): Define.
- (show_usage): Add --gdwarf-3, --gdwarf-4 and --gdwarf-5.
- (parse_args): Add support for the new options.
- as.h (dwarf_level): Prototype.
- * dwarf2dbg.c (DWARF2_VERSION): Use dwarf_level as default version
- value.
- * config/tc-ia64.h (DWARF2_VERISION): Update definition.
- (DWARF2_LINE_VERSION): Remove definition.
- * doc/as.texi: Document the new options.
-
-2020-03-06 Nick Clifton <nickc@redhat.com>
-
- PR 25572
- * as.c (main): Allow matching input and outputs when they are
- not regular files.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (match_mem_size): Generalize broadcast special
- casing.
- (check_VecOperands): Zap xmmword/ymmword/zmmword when more than
- one of byte/word/dword/qword is set alongside a SIMD register in
- a template's operand.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (match_template): Extend code in logic
- rejecting certain suffixes in certain modes to also cover mask
- register use and VecSIB. Drop special casing of broadcast. Skip
- immediates in the check.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (match_template): Fold duplicate code in
- logic rejecting certain suffixes in certain modes. Drop
- pointless "else".
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Exlucde !vexw insns
- alongside !norex64 ones.
- * testsuite/gas/i386/x86-64-avx512bw.s: Test VPEXTR* and VPINSR*
- with both 32- and 64-bit GPR operands.
- * testsuite/gas/i386/x86-64-avx512f.s: Test VEXTRACTPS with both
- 32- and 64-bit GPR operands.
- * testsuite/gas/i386/x86-64-avx512bw-intel.d,
- testsuite/gas/i386/x86-64-avx512bw.d,
- testsuite/gas/i386/x86-64-avx512f-intel.d,
- testsuite/gas/i386/x86-64-avx512f.d: Adjust expectations.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Drop use of rex64.
- (process_suffix): For REX.W for 64-bit CRC32.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (i386_addressing_mode): For 32-bit
- addressing for MPX insns without base/index.
- * testsuite/gas/i386/mpx-16bit.s,
- * testsuite/gas/i386/mpx-16bit.d: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/adx.s, testsuite/gas/i386/cet.s,
- testsuite/gas/i386/ept.s, testsuite/gas/i386/fsgs.s,
- testsuite/gas/i386/invpcid.s, testsuite/gas/i386/movdir.s,
- testsuite/gas/i386/ptwrite.s, testsuite/gas/i386/vmx.s,
- * testsuite/gas/i386/code16.s: Add CR, DR, and TR access cases
- as well as a BSWAP one.
- * testsuite/gas/i386/rdpid.s: Add 16-bit case.
- * testsuite/gas/i386/sse2-16bit.s: Cover more insns.
- * testsuite/gas/i386/adx-intel.d, testsuite/gas/i386/adx.d,
- testsuite/gas/i386/cet-intel.d, testsuite/gas/i386/cet.d,
- testsuite/gas/i386/code16.d, testsuite/gas/i386/ept-intel.d,
- testsuite/gas/i386/ept.d, testsuite/gas/i386/fsgs-intel.d,
- testsuite/gas/i386/fsgs.d, testsuite/gas/i386/invpcid-intel.d,
- testsuite/gas/i386/invpcid.d, testsuite/gas/i386/movdir-intel.d,
- testsuite/gas/i386/movdir.d, testsuite/gas/i386/ptwrite-intel.d,
- testsuite/gas/i386/ptwrite.d, testsuite/gas/i386/rdpid-intel.d,
- testsuite/gas/i386/rdpid.d, testsuite/gas/i386/sse2-16bit.d,
- testsuite/gas/i386/vmx.d: Adjust expectations.
-
-2020-03-06 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Also exclude tpause and umwait
- from having their operands swapped.
- * testsuite/gas/i386/waitpkg.s,
- testsuite/gas/i386/x86-64-waitpkg.s: Add tpause and umwait
- 3-operand cases as well as testing of 16-bit code generation.
- * testsuite/gas/i386/waitpkg.d,
- testsuite/gas/i386/waitpkg-intel.d,
- testsuite/gas/i386/x86-64-waitpkg.d,
- testsuite/gas/i386/x86-64-waitpkg-intel.d: Adjust expectations.
-
-2020-03-04 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (percent_op_utype): Support the modifier
- %got_pcrel_hi.
- * doc/c-riscv.texi: Add documentation.
- * testsuite/gas/riscv/no-relax-reloc.d: Add test case for the new
- modifier %got_pcrel_hi.
- * testsuite/gas/riscv/no-relax-reloc.s: Likewise.
- * testsuite/gas/riscv/relax-reloc.d: Likewise.
- * testsuite/gas/riscv/relax-reloc.s: Likewise.
-
- * doc/c-riscv.texi (relocation modifiers): Add documentation.
- (RISC-V-Formats): Update the section name from "Instruction Formats"
- to "RISC-V Instruction Formats".
-
-2020-03-04 Alexandre Oliva <oliva@adacore.com>
-
- * config/tc-arm.c (md_apply_fix): Warn if a PC-relative load is
- detected in a section which does not have at least 4 byte
- alignment.
- * testsuite/gas/arm/armv8-ar-it-bad.s: Add alignment directive.
- * testsuite/gas/arm/ldr-t.s: Likewise.
- * testsuite/gas/arm/sp-pc-usage-t.s: Likewise.
- * testsuite/gas/arm/sp-pc-usage-t.d: Finish test at end of
- disassembly, ignoring any NOPs that may have been inserted because
- of section alignment.
- * testsuite/gas/arm/ldr-t.d: Likewise.
-
-2020-03-04 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (cpu_arch): Add .sev_es entry.
- * doc/c-i386.texi: Mention sev_es.
- * testsuite/gas/i386/arch-13.s: Add SEV-ES case.
- * testsuite/gas/i386/arch-13.d: Extend -march=. Adjust
- expectations.
- * testsuite/gas/i386/arch-13-znver1.d,
- testsuite/gas/i386/arch-13-znver2.d: Extend -march=.
-
-2020-03-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Replace ignoresize and
- defaultsize with mnemonicsize.
- (process_suffix): Likewise.
-
-2020-03-03 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25627
- * config/tc-z80.c (emit_ld_rr_m): Fix invalid compilation of
- instruction LD IY,(HL).
- * testsuite/gas/z80/ez80_adl_all.d: Update expected disassembly.
- * testsuite/gas/z80/ez80_adl_all.s: Add tests of the instruction.
- * testsuite/gas/z80/ez80_z80_all.d: Update expected disassembly.
- * testsuite/gas/z80/ez80_z80_all.s: Add tests of the instruction.
-
-2020-03-03 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25622
- * testsuite/gas/i386/i386.exp: Run x86-64-default-suffix and
- x86-64-default-suffix-avx.
- * testsuite/gas/i386/noreg64.s: Remove cvtsi2sd, cvtsi2ss,
- vcvtsi2sd, vcvtsi2ss, vcvtusi2sd and vcvtusi2ss entries.
- * testsuite/gas/i386/noreg64.d: Updated.
- * testsuite/gas/i386/noreg64.l: Likewise.
- * testsuite/gas/i386/x86-64-default-suffix-avx.d: New file.
- * testsuite/gas/i386/x86-64-default-suffix.d: Likewise.
- * testsuite/gas/i386/x86-64-default-suffix.s: Likewise.
-
-2020-03-03 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25604
- * config/tc-z80.c (contains_register): Prevent an illegal memory
- access when checking an expression for a register name.
-
-2020-03-03 Alan Modra <amodra@gmail.com>
-
- * config/obj-coff.h: Remove vestiges of coff-m68k and pe-mips
- support.
-
-2020-03-02 Alan Modra <amodra@gmail.com>
-
- * config/tc-m32r.c (md_begin): Set SEC_SMALL_DATA on .scommon section.
- * config/tc-mips.c (s_change_sec): Set SEC_SMALL_DATA for .sdata
- and .sbss sections.
- * config/tc-score.c: Delete !BFD_ASSEMBLER code throughout.
- (s3_s_change_sec): Set SEC_SMALL_DATA for .sbss section.
- (s3_s_score_lcomm): Likewise.
- * config/tc-score7.c: Similarly.
- * read.c (bss_alloc): Set SEC_SMALL_DATA for .sbss section.
-
-2020-02-28 YunQiang Su <syq@debian.org>
-
- PR gas/25539
- * config/tc-mips.c (fix_loongson3_llsc): Compare label value
- to handle multi-labels.
- (has_label_name): New.
-
-2020-02-26 Matthew Malcomson <matthew.malcomson@arm.com>
-
- * config/tc-arm.c (enum pred_instruction_type): Remove
- NEUTRAL_IT_NO_VPT_INSN predication type.
- (cxn_handle_predication): Modify to require condition suffixes.
- (handle_pred_state): Remove NEUTRAL_IT_NO_VPT_INSN cases.
- * testsuite/gas/arm/cde-scalar.s: Update test.
- * testsuite/gas/arm/cde-warnings.l: Update test.
- * testsuite/gas/arm/cde-warnings.s: Update test.
-
-2020-02-26 Alan Modra <amodra@gmail.com>
-
- * config/tc-arm.c (reg_expected_msgs[REG_TYPE_RNB]): Don't use
- N_() on empty string.
-
-2020-02-26 Alan Modra <amodra@gmail.com>
-
- * read.c (read_a_source_file): Call strncpy with length one
- less than size of original_case_string.
-
-2020-02-26 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c: Indent labels correctly.
- * config/obj-macho.c: Likewise.
- * config/tc-aarch64.c: Likewise.
- * config/tc-alpha.c: Likewise.
- * config/tc-arm.c: Likewise.
- * config/tc-cr16.c: Likewise.
- * config/tc-crx.c: Likewise.
- * config/tc-frv.c: Likewise.
- * config/tc-i386-intel.c: Likewise.
- * config/tc-i386.c: Likewise.
- * config/tc-ia64.c: Likewise.
- * config/tc-mn10200.c: Likewise.
- * config/tc-mn10300.c: Likewise.
- * config/tc-nds32.c: Likewise.
- * config/tc-riscv.c: Likewise.
- * config/tc-s12z.c: Likewise.
- * config/tc-xtensa.c: Likewise.
- * config/tc-z80.c: Likewise.
- * read.c: Likewise.
- * symbols.c: Likewise.
- * write.c: Likewise.
-
-2020-02-20 Nelson Chu <nelson.chu@sifive.com>
-
- * config/tc-riscv.c (riscv_ip): New boolean insn_with_csr to indicate
- we are assembling instruction with CSR. Call riscv_csr_read_only_check
- after parsing all arguments.
- (enum csr_insn_type): New enum is used to classify the CSR instruction.
- (riscv_csr_insn_type, riscv_csr_read_only_check): New functions. These
- are used to check if we write a read-only CSR by the CSR instruction.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: New testcase. Test
- all CSR for the read-only CSR checking.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-02.s: New testcase. Test
- all CSR instructions for the read-only CSR checking.
- * testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise.
-
- * config/tc-riscv.c (struct riscv_set_options): New field csr_check.
- (riscv_opts): Initialize it.
- (reg_lookup_internal): Check the `riscv_opts.csr_check`
- before doing the CSR checking.
- (enum options): Add OPTION_CSR_CHECK and OPTION_NO_CSR_CHECK.
- (md_longopts): Add mcsr-check and mno-csr-check.
- (md_parse_option): Handle new enum option values.
- (s_riscv_option): Handle new long options.
- * doc/c-riscv.texi: Add description for the new .option and assembler
- options.
- * testsuite/gas/riscv/priv-reg-fail-fext.d: Add `-mcsr-check` to enable
- the CSR checking.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
-
- * config/tc-riscv.c (csr_extra_hash): New.
- (enum riscv_csr_class): New enum. Used to decide
- whether or not this CSR is legal in the current ISA string.
- (struct riscv_csr_extra): New structure to hold all extra information
- of CSR.
- (riscv_init_csr_hashes): New. According to the DECLARE_CSR and
- DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
- Call hash_reg_name to insert CSR address into reg_names_hash.
- (reg_csr_lookup_internal, riscv_csr_class_check): New functions.
- Decide whether the CSR is valid according to the csr_extra_hash.
- (reg_lookup_internal): Call reg_csr_lookup_internal for CSRs.
- (init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
- not a boolean. This is same as riscv_init_csr_hash, so keep the
- consistent usage.
- (md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
- * testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
- * testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
- * testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
- file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
- f-ext CSR are not allowed.
- * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
- source file is `priv-reg.s`, and the ISA is rv64if, so the
- rv32-only CSR are not allowed.
- * testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
-
-2020-02-21 Alan Modra <amodra@gmail.com>
-
- * config/tc-pdp11.c (md_apply_fix): Handle BFD_RELOC_32.
- (tc_gen_reloc): Only give a BAD_CASE assertion on pcrel relocs.
-
-2020-02-21 Alan Modra <amodra@gmail.com>
-
- PR 25569
- * config/obj-aout.c (obj_aout_frob_file_before_fix): Don't loop
- on section size adjustment, instead perform another write if
- exec header size is larger than section size.
-
-2020-02-19 Nelson Chu <nelson.chu@sifive.com>
-
- * doc/c-riscv.texi: Add the doc entries for -march-attr/
- -mno-arch-attr command line options.
-
-2020-02-19 Nelson Chu <nelson.chu@sifive.com>
-
- * testsuite/gas/riscv/c-add-addi.d: New testcase.
- * testsuite/gas/riscv/c-add-addi.s: Likewise.
-
-2020-02-19 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25576
- * config/tc-z80.c (md_parse_option): Do not use an underscore
- prefix for local labels in SDCC compatability mode.
- (z80_start_line_hook): Remove SDCC dollar label support.
- * testsuite/gas/z80/sdcc.d: Update expected disassembly.
- * testsuite/gas/z80/sdcc.s: Likewise.
-
-2020-02-19 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25517
- * config/tc-z80.c: Add -march option.
- * doc/as.texi: Update Z80 documentation.
- * doc/c-z80.texi: Likewise.
- * testsuite/gas/z80/ez80_adl_all.d: Update command line.
- * testsuite/gas/z80/ez80_adl_suf.d: Likewise.
- * testsuite/gas/z80/ez80_pref_dis.d: Likewise.
- * testsuite/gas/z80/ez80_z80_all.d: Likewise.
- * testsuite/gas/z80/ez80_z80_suf.d: Likewise.
- * testsuite/gas/z80/gbz80_all.d: Likewise.
- * testsuite/gas/z80/r800_extra.d: Likewise.
- * testsuite/gas/z80/r800_ii8.d: Likewise.
- * testsuite/gas/z80/r800_z80_doc.d: Likewise.
- * testsuite/gas/z80/sdcc.d: Likewise.
- * testsuite/gas/z80/z180.d: Likewise.
- * testsuite/gas/z80/z180_z80_doc.d: Likewise.
- * testsuite/gas/z80/z80_doc.d: Likewise.
- * testsuite/gas/z80/z80_ii8.d: Likewise.
- * testsuite/gas/z80/z80_in_f_c.d: Likewise.
- * testsuite/gas/z80/z80_op_ii_ld.d: Likewise.
- * testsuite/gas/z80/z80_out_c_0.d: Likewise.
- * testsuite/gas/z80/z80_sli.d: Likewise.
- * testsuite/gas/z80/z80n_all.d: Likewise.
- * testsuite/gas/z80/z80n_reloc.d: Likewise.
-
-2020-02-19 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_insn): Mark cvtpi2ps and cvtpi2pd
- with GNU_PROPERTY_X86_FEATURE_2_MMX.
- * testsuite/gas/i386/i386.exp: Run property-3 and
- x86-64-property-3.
- * testsuite/gas/i386/property-3.d: New file.
- * testsuite/gas/i386/property-3.s: Likewise.
- * testsuite/gas/i386/x86-64-property-3.d: Likewise.
-
-2020-02-17 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .popcnt.
- * doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
- Add a tab before @samp{.sse4a}.
-
-2020-02-17 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Don't try to guess a suffix
- for AddrPrefixOpReg templates. Combine the two pieces of
- addrprefixopreg handling. Reject 16-bit address reg in 64-bit
- mode.
-
-2020-02-17 Jan Beulich <jbeulich@suse.com>
-
- PR gas/14439
- * config/tc-i386.c (md_assemble): Also suppress operand
- swapping for MONITOR{,X} and MWAIT{,X}.
- * testsuite/gas/i386/sse3.s, testsuite/gas/i386/x86-64-sse3.s:
- Add Intel syntax monitor/mwait tests.
- * testsuite/gas/i386/sse3.d, testsuite/gas/i386/x86-64-sse3.d:
- Adjust expectations.
- *testsuite/gas/i386/sse3-intel.d,
- testsuite/gas/i386/x86-64-sse3-intel.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-02-17 Jan Beulich <jbeulich@suse.com>
-
- PR gas/6518
- * config/tc-i386.c (process_suffix): Re-work Intel-syntax
- [XYZ]MMWord memory operand ambiguity recognition logic (largely
- re-indentation).
- * testsuite/gas/i386/avx512dq-inval.s: Add vcvtqq2ps/vcvtuqq2ps
- cases.
- * testsuite/gas/i386/inval-avx512f.s: Also test vcvtneps2bf16.
- * testsuite/gas/i386/avx512dq-inval.l,
- testsuite/gas/i386/inval-avx.l,
- testsuite/gas/i386/inval-avx512f.l: Adjust expectations.
- * testsuite/gas/i386/avx512vl-ambig.s,
- testsuite/gas/i386/avx512vl-ambig.l: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-02-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
- nosse4.
- * doc/c-i386.texi: Document sse4a and nosse4a.
-
-2020-02-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Remove the old movsx and movzx documentation
- for AT&T syntax.
-
-2020-02-14 Jan Beulich <jbeulich@suse.com>
-
- PR gas/25438
- * config/tc-i386.c (md_assemble): Move movsx/movzx special
- casing ...
- (process_suffix): ... here. Consider just the first operand
- initially.
- (check_long_reg): Drop opcode 0x63 special case again.
- * testsuite/gas/i386/i386.s, testsuite/gas/i386/iamcu-1.s,
- testsuite/gas/i386/ilp32/x86-64.s, testsuite/gas/i386/x86_64.s:
- Move ambiguous operand size tests ...
- * testsuite/gas/i386/noreg16.s, testsuite/gas/i386/noreg32.s,
- testsuite/gas/i386/noreg64.s: ... here.
- * testsuite/gas/i386/i386.d, testsuite/gas/i386/i386-intel.d
- testsuite/gas/i386/iamcu-1.d, testsuite/gas/i386/ilp32/x86-64.d,
- testsuite/gas/i386/k1om.d, testsuite/gas/i386/l1om.d,
- testsuite/gas/i386/movx16.l, testsuite/gas/i386/movx32.l,
- testsuite/gas/i386/movx64.l, testsuite/gas/i386/noreg16.d,
- testsuite/gas/i386/noreg32.d, testsuite/gas/i386/noreg64.d,
- testsuite/gas/i386/x86-64-movsxd.d,
- testsuite/gas/i386/x86-64-movsxd-intel.d,
- testsuite/gas/i386/x86_64.d, testsuite/gas/i386/x86_64-intel.d:
- Adjust expectations.
- * testsuite/gas/i386/movx16.s, testsuite/gas/i386/movx16.l,
- testsuite/gas/i386/movx32.s, testsuite/gas/i386/movx32.l,
- testsuite/gas/i386/movx64.s, testsuite/gas/i386/movx64.l: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-02-14 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_operands): Also skip segment
- override prefix emission if it matches an already present one.
- * testsuite/gas/i386/prefix32.s: Add double segment override
- cases.
- * testsuite/gas/i386/prefix32.l: Adjust expectations.
-
-2020-02-14 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_operands): Drop ineffectual segment
- overrides when optimizing.
- * testsuite/gas/i386/lea-optimize.d: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-02-14 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_operands): Also check insn prefix
- for ineffectual segment override warning. Don't cover possible
- VEX/EVEX encoded insns there.
- * testsuite/gas/i386/lea.s, testsuite/gas/i386/lea.d,
- testsuite/gas/i386/lea.e: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-02-14 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25438
- * doc/c-i386.texi: Document movsx, movsxd and movzx for AT&T
- syntax.
-
-2020-02-13 Fangrui Song <maskray@google.com>
- H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25551
- * config/tc-i386.c (tc_i386_fix_adjustable): Don't check
- BFD_RELOC_386_PLT32 nor BFD_RELOC_X86_64_PLT32.
- * testsuite/gas/i386/i386.exp: Run relax-5 and x86-64-relax-4.
- * testsuite/gas/i386/relax-5.d: New file.
- * testsuite/gas/i386/relax-5.s: Likewise.
- * testsuite/gas/i386/x86-64-relax-4.d: Likewise.
- * testsuite/gas/i386/x86-64-relax-4.s: Likewise.
-
-2020-02-13 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (cpu_noarch): Use CPU_ANY_SSE4_FLAGS in
- "nosse4" entry.
-
-2020-02-12 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (avx512): New (at file scope), moved from
- (check_VecOperands): ... here.
- (process_suffix): Add [XYZ]MMword operand size handling.
- * testsuite/gas/i386/avx512dq-inval.s: Add VFPCLASS tests.
- * testsuite/gas/i386/noavx512-2.s: Add Intel syntax VFPCLASS
- tests.
- * testsuite/gas/i386/avx512dq-inval.l,
- testsuite/gas/i386/noavx512-2.l: Adjust expectations.
-
-2020-02-12 Jan Beulich <jbeulich@suse.com>
-
- PR gas/24546
- * config/tc-i386.c (match_template): Apply AMD64 check to 64-bit
- code only.
- * config/tc-i386-intel.c (i386_intel_operand): Also handle
- CALL/JMP in O_tbyte_ptr case.
- * doc/c-i386.texi: Mention far call and full pointer load ISA
- differences.
- * testsuite/gas/i386/x86-64-branch-3.s,
- testsuite/gas/i386/x86-64-intel64.s: Add 64-bit far call cases.
- * testsuite/gas/i386/x86-64-branch-3.d,
- testsuite/gas/i386/x86-64-intel64.d: Adjust expectations.
- * testsuite/gas/i386/x86-64-branch-5.l,
- testsuite/gas/i386/x86-64-branch-5.s: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-02-12 Jan Beulich <jbeulich@suse.com>
-
- PR gas/25438
- * config/tc-i386.c (REGISTER_WARNINGS): Delete.
- (check_byte_reg): Skip only source operand of CRC32. Drop Non-
- 64-bit-only warning.
- (check_word_reg): Consistently error on mismatching register
- size and suffix.
- * testsuite/gas/i386/general.s: Replace dword GPR with word one
- for movw. Replace suffix / GPR for orb.
- * testsuite/gas/i386/inval.s: Add tests for movw with dword and
- byte GPRs as well as ones for inb/outb with a word accumulator.
- * testsuite/gas/i386/general.l, testsuite/gas/i386/intelbad.l,
- testsuite/gas/i386/inval.l: Adjust expectations.
-
-2020-02-12 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (operand_type_register_match): Also fall
- through initial two if()-s when the template allows for a GPR
- operand. Adjust comment.
-
-2020-02-11 Jan Beulich <jbeulich@suse.com>
-
- (struct _i386_insn): New field "short_form".
- (optimize_encoding): Drop setting of shortform field.
- (process_suffix): Set i.short_form. Replace shortform use.
- (process_operands): Replace shortform use.
-
-2020-02-11 Matthew Malcomson <matthew.malcomson@arm.com>
-
- * config/tc-arm.c (vcx_handle_register_arguments): Remove `for`
- loop initial declaration.
-
-2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
-
- * config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
- instructions that can have 5 arguments.
- (enum operand_parse_code): Add new operands.
- (parse_operands): Account for new operands.
- (S5): New macro.
- (enum neon_shape_el): Introduce P suffixes for coprocessor.
- (neon_select_shape): Account for P suffix.
- (LOW1): Move macro to global position.
- (HI4): Move macro to global position.
- (vcx_assign_vec_d): New.
- (vcx_assign_vec_m): New.
- (vcx_assign_vec_n): New.
- (enum vcx_reg_type): New.
- (vcx_get_reg_type): New.
- (vcx_size_pos): New.
- (vcx_vec_pos): New.
- (vcx_handle_shape): New.
- (vcx_ensure_register_in_range): New.
- (vcx_handle_register_arguments): New.
- (vcx_handle_insn_block): New.
- (vcx_handle_common_checks): New.
- (do_vcx1): New.
- (do_vcx2): New.
- (do_vcx3): New.
- * testsuite/gas/arm/cde-missing-fp.d: New test.
- * testsuite/gas/arm/cde-missing-fp.l: New test.
- * testsuite/gas/arm/cde-missing-mve.d: New test.
- * testsuite/gas/arm/cde-missing-mve.l: New test.
- * testsuite/gas/arm/cde-mve-or-neon.d: New test.
- * testsuite/gas/arm/cde-mve-or-neon.s: New test.
- * testsuite/gas/arm/cde-mve.s: New test.
- * testsuite/gas/arm/cde-warnings.l:
- * testsuite/gas/arm/cde-warnings.s:
- * testsuite/gas/arm/cde.d:
- * testsuite/gas/arm/cde.s:
-
-2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
- Matthew Malcomson <matthew.malcomson@arm.com>
-
- * config/tc-arm.c (arm_ext_cde*): New feature sets for each
- CDE coprocessor that can be enabled.
- (enum pred_instruction_type): New pred type.
- (BAD_NO_VPT): New error message.
- (BAD_CDE): New error message.
- (BAD_CDE_COPROC): New error message.
- (enum operand_parse_code): Add new immediate operands.
- (parse_operands): Account for new immediate operands.
- (check_cde_operand): New.
- (cde_coproc_enabled): New.
- (cde_coproc_pos): New.
- (cde_handle_coproc): New.
- (cxn_handle_predication): New.
- (do_custom_instruction_1): New.
- (do_custom_instruction_2): New.
- (do_custom_instruction_3): New.
- (do_cx1): New.
- (do_cx1a): New.
- (do_cx1d): New.
- (do_cx1da): New.
- (do_cx2): New.
- (do_cx2a): New.
- (do_cx2d): New.
- (do_cx2da): New.
- (do_cx3): New.
- (do_cx3a): New.
- (do_cx3d): New.
- (do_cx3da): New.
- (handle_pred_state): Define new IT block behaviour.
- (insns): Add newn CX*{,d}{,a} instructions.
- (CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
- Define new cdecp extension strings.
- * doc/c-arm.texi: Document new cdecp extension arguments.
- * testsuite/gas/arm/cde-scalar.d: New test.
- * testsuite/gas/arm/cde-scalar.s: New test.
- * testsuite/gas/arm/cde-warnings.d: New test.
- * testsuite/gas/arm/cde-warnings.l: New test.
- * testsuite/gas/arm/cde-warnings.s: New test.
- * testsuite/gas/arm/cde.d: New test.
- * testsuite/gas/arm/cde.s: New test.
-
-2020-02-10 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25516
- * config/tc-i386.c (intel64): Renamed to ...
- (isa64): This.
- (match_template): Accept Intel64 only instruction by default.
- (i386_displacement): Updated.
- (md_parse_option): Updated.
- * c-i386.texi: Update -mamd64/-mintel64 documentation.
- * testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
- -mamd64 to x86-64-sysenter-amd.
- * testsuite/gas/i386/x86-64-sysenter.d: New file.
-
-2020-02-10 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c (obj_elf_change_section): Error for section
- type, attr or entsize changes in assembly.
- * testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
- * testsuite/gas/elf/section5.l: Update.
-
-2020-02-10 Alan Modra <amodra@gmail.com>
-
- * output-file.c (output_file_close): Do a normal close when
- flag_always_generate_output.
- * write.c (write_object_file): Don't stop output when
- flag_always_generate_output.
-
-2020-02-07 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25469
- * config/tc-z80.c: Add -gbz80 command line option to generate code
- for the GameBoy Z80. Add support for generating DWARF.
- * config/tc-z80.h: Add support for DWARF debug information
- generation.
- * doc/c-z80.texi: Document new command line option.
- * testsuite/gas/z80/gbz80_all.d: New file.
- * testsuite/gas/z80/gbz80_all.s: New file.
- * testsuite/gas/z80/z80.exp: Run the new tests.
- * testsuite/gas/z80/z80n_all.d: New file.
- * testsuite/gas/z80/z80n_all.s: New file.
- * testsuite/gas/z80/z80n_reloc.d: New file.
-
-2020-02-06 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25381
- * config/obj-elf.c (get_section): Also check
- linked_to_symbol_name.
- (obj_elf_change_section): Also set map_head.linked_to_symbol_name.
- (obj_elf_parse_section_letters): Handle the 'o' flag.
- (build_group_lists): Renamed to ...
- (build_additional_section_info): This. Set elf_linked_to_section
- from map_head.linked_to_symbol_name.
- (elf_adjust_symtab): Updated.
- * config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
- * doc/as.texi: Document the 'o' flag.
- * testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
- * testsuite/gas/elf/section18.d: New file.
- * testsuite/gas/elf/section18.s: Likewise.
- * testsuite/gas/elf/section19.d: Likewise.
- * testsuite/gas/elf/section19.s: Likewise.
- * testsuite/gas/elf/section20.d: Likewise.
- * testsuite/gas/elf/section20.s: Likewise.
- * testsuite/gas/elf/section21.d: Likewise.
- * testsuite/gas/elf/section21.l: Likewise.
- * testsuite/gas/elf/section21.s: Likewise.
-
-2020-02-06 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention x86 assembler options to align branches for
- binutils 2.34.
-
-2020-02-06 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/i386/i386.exp: Run unique and x86-64-unique
- only for ELF targets.
- * testsuite/gas/i386/unique.d: Don't xfail.
- * testsuite/gas/i386/x86-64-unique.d: Likewise.
-
-2020-02-06 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/i386/unique.d: xfail for non-elf targets.
- * testsuite/gas/i386/x86-64-unique.d: Likewise.
-
-2020-02-06 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/elf/section12a.d: Use supports_gnu_osabi in
- xfail, and rename test.
- * testsuite/gas/elf/section12b.d: Likewise.
- * testsuite/gas/elf/section16a.d: Likewise.
- * testsuite/gas/elf/section16b.d: Likewise.
-
-2020-02-02 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25380
- * config/obj-elf.c (section_match): Removed.
- (get_section): Also match SEC_ASSEMBLER_SECTION_ID and
- section_id.
- (obj_elf_change_section): Replace info and group_name arguments
- with match_p. Also update the section ID and flags from match_p.
- (obj_elf_section): Handle "unique,N". Update call to
- obj_elf_change_section.
- * config/obj-elf.h (elf_section_match): New.
- (obj_elf_change_section): Updated.
- * config/tc-arm.c (start_unwind_section): Update call to
- obj_elf_change_section.
- * config/tc-ia64.c (obj_elf_vms_common): Likewise.
- * config/tc-microblaze.c (microblaze_s_data): Likewise.
- (microblaze_s_sdata): Likewise.
- (microblaze_s_rdata): Likewise.
- (microblaze_s_bss): Likewise.
- * config/tc-mips.c (s_change_section): Likewise.
- * config/tc-msp430.c (msp430_profiler): Likewise.
- * config/tc-rx.c (parse_rx_section): Likewise.
- * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
- * doc/as.texi: Document "unique,N" in .section directive.
- * testsuite/gas/elf/elf.exp: Run "unique,N" tests.
- * testsuite/gas/elf/section15.d: New file.
- * testsuite/gas/elf/section15.s: Likewise.
- * testsuite/gas/elf/section16.s: Likewise.
- * testsuite/gas/elf/section16a.d: Likewise.
- * testsuite/gas/elf/section16b.d: Likewise.
- * testsuite/gas/elf/section17.d: Likewise.
- * testsuite/gas/elf/section17.l: Likewise.
- * testsuite/gas/elf/section17.s: Likewise.
- * testsuite/gas/i386/unique.d: Likewise.
- * testsuite/gas/i386/unique.s: Likewise.
- * testsuite/gas/i386/x86-64-unique.d: Likewise.
- * testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
-
-2020-02-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * testsuite/gas/elf/section13.s: Replace @nobits with %nobits.
-
-2020-02-01 Anthony Green <green@moxielogic.com>
-
- * config/tc-moxie.c (md_begin): Don't force big-endian mode.
-
-2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
-
- * config/tc-nios2.c (nios2_cons): Handle %gotoff as well as
- %tls_ldo.
-
-2020-01-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
-
- PR gas/25472
- * config/tc-arm.c (armv8m_main_ext_table): Refactored +dsp adding.
- (armv8_1m_main_ext_table): Refactored +dsp adding and enabled dsp for
- +mve.
- * testsuite/gas/arm/mve_dsp.d: New test.
-
-2020-01-31 Nick Clifton <nickc@redhat.com>
-
- * config/tc-s390.c (s390_elf_suffix): Return ELF_SUFFIX_NONE
- rather than BFD_RELOC_NONE.
-
-2020-01-31 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
-
- * config/tc-arm.c (fldmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2"
- to support VLDMIA instruction for MVE.
- (fldmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VLDMDB
- instruction for MVE.
- (fstmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMIA
- instruction for MVE.
- (fstmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMDB
- instruction for MVE.
- * testsuite/gas/arm/mve-ldst.d: New test.
- * testsuite/gas/arm/mve-ldst.s: Likewise.
-
-2020-01-31 Nick Clifton <nickc@redhat.com>
-
- * po/fr.po: Updated French translation.
- * po/ru.po: Updated Russian translation.
-
-2020-01-31 Richard Sandiford <richard.sandiford@arm.com>
-
- * testsuite/gas/aarch64/sve-bfloat-movprfx.s: Use .h rather than
- .s for the movprfx.
- * testsuite/gas/aarch64/sve-bfloat-movprfx.d: Update accordingly.
- * testsuite/gas/aarch64/sve-movprfx_28.d,
- * testsuite/gas/aarch64/sve-movprfx_28.l,
- * testsuite/gas/aarch64/sve-movprfx_28.s: New test.
-
-2020-01-30 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (output_disp): Tighten base_opcode check.
- * testsuite/gas/i386/got.s: Add LSL, MOVLPS, and BNDCN cases.
- * testsuite/gas/i386/got-no-relax.d, testsuite/gas/i386/got.d:
- Adjust expectations.
-
-2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * testsuite/gas/bpf/alu.d: Update expected opcode for `neg'.
- * testsuite/gas/bpf/alu-be.d: Likewise.
- * testsuite/gas/bpf/alu32.d: Likewise for `neg32'.
- * testsuite/gas/bpf/alu32-be.d: Likewise.
-
-2020-01-30 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-branch-2.s,
- testsuite/gas/i386/x86-64-branch-4.s,
- testsuite/gas/i386/x86-64-branch.s: Add RETW cases.
- * testsuite/gas/i386/ilp32/x86-64-branch.d,
- testsuite/gas/i386/x86-64-branch-2.d,
- testsuite/gas/i386/x86-64-branch-4.l,
- testsuite/gas/i386/x86-64-branch.d: Adjust expectations.
-
-2020-01-30 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): .
- testsuite/gas/i386/noreg64.s: Add IRET and LRET cases.
- testsuite/gas/i386/x86-64-opcode.s: Add suffix to IRET and LRET.
- Add LRETQ case.
- testsuite/gas/i386/x86-64-suffix.s: Drop IRET case without
- suffix.
- testsuite/gas/i386/x86_64.s: Add RETF cases.
- * testsuite/gas/i386/k1om.d, testsuite/gas/i386/l1om.d,
- testsuite/gas/i386/noreg64.d, testsuite/gas/i386/noreg64.l,
- testsuite/gas/i386/x86-64-opcode.d,
- testsuite/gas/i386/x86-64-suffix-intel.d,
- testsuite/gas/i386/x86-64-suffix.d,
- testsuite/gas/i386/x86_64-intel.d
- testsuite/gas/i386/x86_64.d: Adjust expectations.
- * testsuite/gas/i386/x86-64-suffix.e,
- testsuite/gas/i386/x86_64.e: New.
-
-2020-01-30 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Redo and move FLDENV et al
- special case.
-
-2020-01-27 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/25445
- * config/tc-i386.c (check_long_reg): Also convert to QWORD for
- movsxd.
- * doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA
- differences. Document movslq and movsxd.
- * testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests.
- * testsuite/gas/i386/x86-64-movsxd-intel.d: New file.
- * testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise.
- * testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise.
- * testsuite/gas/i386/x86-64-movsxd.d: Likewise.
- * testsuite/gas/i386/x86-64-movsxd.s: Likewise.
-
-2020-01-27 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/all/gas.exp: Replace case statements with switch
- statements.
- * testsuite/gas/elf/elf.exp: Likewise.
- * testsuite/gas/macros/macros.exp: Likewise.
- * testsuite/lib/gas-defs.exp: Likewise.
-
-2020-01-27 Tamar Christina <tamar.christina@arm.com>
-
- PR 25403
- * testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
- * testsuite/gas/aarch64/armv8_4-a.s: Likewise.
-
-2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
-
- * testsuite/gas/riscv/march-ok-s.d: sx is no longer valid and
- s exts must be known, so rename *ok* to *fail*.
- * testsuite/gas/riscv/march-ok-sx.d: Likewise.
- * testsuite/gas/riscv/march-ok-s-with-version: Likewise.
- * testsuite/gas/riscv/march-fail-s.l: Expected error messages for
- above change.
- * testsuite/gas/riscv/march-fail-sx.l: Likewise.
- * testsuite/gas/riscv/march-fail-sx-with-version.l: Likewise.
-
-2020-01-22 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/25438
- * config/tc-i386.c (check_long_reg): Always disallow double word
- suffix in mnemonic with word general register.
- * testsuite/gas/i386/general.s: Replace word general register
- with double word general register for movl.
- * testsuite/gas/i386/inval.s: Add tests for movl with word general
- register.
- * testsuite/gas/i386/general.l: Updated.
- * testsuite/gas/i386/inval.l: Likewise.
-
-2020-01-22 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (parse_tls_arg): Handle tls arg for
- __tls_get_addr_desc and __tls_get_addr_opt.
-
-2020-01-21 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/inval-crc32.s,
- testsuite/gas/i386/x86-64-inval-crc32.s: Add alignment directive.
- * testsuite/gas/i386/inval-crc32.l,
- testsuite/gas/i386/x86-64-inval-crc32.l: Adjust expectations.
-
-2020-01-21 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Merge CRC32 handling into
- generic code path. Deal with No_lSuf being set in a template.
- * testsuite/gas/i386/inval-crc32.l,
- testsuite/gas/i386/x86-64-inval-crc32.l: Expect warning(s)
- instead of error(s) when operand size is ambiguous.
- * testsuite/gas/i386/noreg16.s, testsuite/gas/i386/noreg32.s,
- testsuite/gas/i386/noreg64.s: Add CRC32 tests.
- * testsuite/gas/i386/noreg16.d, testsuite/gas/i386/noreg16.l,
- testsuite/gas/i386/noreg32.d, testsuite/gas/i386/noreg32.l,
- testsuite/gas/i386/noreg64.d, testsuite/gas/i386/noreg64.l:
- Adjust expectations.
-
-2020-01-21 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (process_suffix): Drop SYSRET special case
- and an intel_syntax check. Re-write lack-of-suffix processing
- logic.
- * doc/c-i386.texi: Document operand size defaults for suffix-
- less AT&T syntax insns.
- * testsuite/gas/i386/bundle.s, testsuite/gas/i386/lock-1.s,
- testsuite/gas/i386/opcode.s, testsuite/gas/i386/sse3.s,
- testsuite/gas/i386/x86-64-avx-scalar.s,
- testsuite/gas/i386/x86-64-avx.s,
- testsuite/gas/i386/x86-64-bundle.s,
- testsuite/gas/i386/x86-64-intel64.s,
- testsuite/gas/i386/x86-64-lock-1.s,
- testsuite/gas/i386/x86-64-opcode.s,
- testsuite/gas/i386/x86-64-sse2avx.s,
- testsuite/gas/i386/x86-64-sse3.s: Add missing suffixes.
- * testsuite/gas/i386/nops.s, testsuite/gas/i386/sse-noavx.s,
- testsuite/gas/i386/x86-64-nops.s,
- testsuite/gas/i386/x86-64-ptwrite.s,
- testsuite/gas/i386/x86-64-simd.s,
- testsuite/gas/i386/x86-64-sse-noavx.s,
- testsuite/gas/i386/x86-64-suffix.s: Drop bogus suffix-less
- insns.
- * testsuite/gas/i386/noreg16.s, testsuite/gas/i386/noreg32.s,
- testsuite/gas/i386/noreg64.s: Add further tests.
- * testsuite/gas/i386/ilp32/x86-64-nops.d,
- testsuite/gas/i386/nops.d, testsuite/gas/i386/noreg16.d,
- testsuite/gas/i386/noreg32.d, testsuite/gas/i386/noreg64.d,
- testsuite/gas/i386/sse-noavx.d,
- testsuite/gas/i386/x86-64-intel64.d,
- testsuite/gas/i386/x86-64-nops.d,
- testsuite/gas/i386/x86-64-opcode.d,
- testsuite/gas/i386/x86-64-ptwrite-intel.d,
- testsuite/gas/i386/x86-64-ptwrite.d,
- testsuite/gas/i386/x86-64-simd-intel.d,
- testsuite/gas/i386/x86-64-simd-suffix.d,
- testsuite/gas/i386/x86-64-simd.d,
- testsuite/gas/i386/x86-64-sse-noavx.d
- testsuite/gas/i386/x86-64-suffix.d,
- testsuite/gas/i386/x86-64-suffix-intel.d: Adjust expectations.
- * testsuite/gas/i386/noreg16.l, testsuite/gas/i386/noreg32.l,
- testsuite/gas/i386/noreg64.l: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-01-21 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/avx512_bf16_vl.s,
- testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Add broadcast forms
- of VCVTNEPS2BF16{X,Y}. Add operand-size less Intel syntax
- broadcast forms of VCVTNEPS2BF16.
- * testsuite/gas/i386/avx512_bf16_vl.d,
- testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Adjust expectations.
-
-2020-01-20 Nick Clifton <nickc@redhat.com>
-
- * po/uk.po: Updated Ukranian translation.
-
-2020-01-20 H.J. Lu <hongjiu.lu@intel.com>
-
- PR ld/25416
- * config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
- for lea with R_X86_64_GOTPC32_TLSDESC relocation when generating
- x32 object.
- * testsuite/gas/i386/ilp32/x32-tls.d: Updated.
- * testsuite/gas/i386/ilp32/x32-tls.s: Add tests for lea with
- R_X86_64_GOTPC32_TLSDESC relocation.
-
-2020-01-18 Nick Clifton <nickc@redhat.com>
-
- * configure: Regenerate.
- * po/gas.pot: Regenerate.
-
-2020-01-18 Nick Clifton <nickc@redhat.com>
-
- Binutils 2.34 branch created.
-
-2020-01-17 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (_i386_insn): Replace vex_encoding_vex2
- with vex_encoding_vex.
- (parse_insn): Likewise.
- * doc/c-i386.texi: Replace {vex2} with {vex}. Update {vex}
- and {vex3} documentation.
- * testsuite/gas/i386/pseudos.s: Replace 3 {vex2} tests with
- {vex}.
- * testsuite/gas/i386/x86-64-pseudos.s: Likewise.
-
-2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
-
- PR 25376
- * config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
- (armv8_1m_main_ext_table): Use CORE_HIGH for mve.
- * testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
- * testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
- * testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
- * testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
-
-2020-01-16 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (match_template): Drop found_cpu_match local
- variable.
-
-2020-01-16 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/avx512dq-inval.l,
- testsuite/gas/i386/avx512dq-inval.s: New.
- * testsuite/gas/i386/i386.exp: Run new test.
-
-2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
-
- * config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
- relocations when the target is 430X, except when extracting part of an
- expression.
- (msp430_srcoperand): Adjust comment.
- Initialize the expp member of the msp430_operand_s struct as
- appropriate.
- (msp430_dstoperand): Likewise.
- * testsuite/gas/msp430/msp430.exp: Run new test.
- * testsuite/gas/msp430/reloc-lo-430x.d: New test.
- * testsuite/gas/msp430/reloc-lo-430x.s: New test.
-
-2020-01-15 Alan Modra <amodra@gmail.com>
-
- * configure.tgt: Add sparc-*-freebsd case.
-
-2020-01-14 Lili Cui <lili.cui@intel.com>
-
- * testsuite/gas/i386/align-branch-1a.d: Updated for Darwin.
- * testsuite/gas/i386/align-branch-1b.d: Likewise.
- * testsuite/gas/i386/align-branch-1c.d: Likewise.
- * testsuite/gas/i386/align-branch-1d.d: Likewise.
- * testsuite/gas/i386/align-branch-1e.d: Likewise.
- * testsuite/gas/i386/align-branch-1f.d: Likewise.
- * testsuite/gas/i386/align-branch-1g.d: Likewise.
- * testsuite/gas/i386/align-branch-1h.d: Likewise.
- * testsuite/gas/i386/align-branch-1i.d: Likewise.
- * testsuite/gas/i386/align-branch-5.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1a.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1b.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1c.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1d.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1e.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1f.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1g.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1h.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-1i.d: Likewise.
- * testsuite/gas/i386/x86-64-align-branch-5.d: Likewise.
- * testsuite/gas/i386/i386.exp: Skip x86-64-align-branch-2a,
- x86-64-align-branch-2b and x86-64-align-branch-2c on Darwin.
-
-2020-01-14 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25377
- * config/tc-z80.c: Add support for half precision, single
- precision and double precision floating point values.
- * config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
- * doc/as.texi: Add new z80 command line options.
- * doc/c-z80.texi: Document new z80 command line options.
- * testsuite/gas/z80/ez80_pref_dis.s: New test.
- * testsuite/gas/z80/ez80_pref_dis.d: New test driver.
- * testsuite/gas/z80/z80.exp: Run the new test.
- * testsuite/gas/z80/fp_math48.d: Use correct command line option.
- * testsuite/gas/z80/fp_zeda32.d: Likewise.
- * testsuite/gas/z80/strings.d: Update expected output.
-
-2020-01-13 Matthew Malcomson <matthew.malcomson@arm.com>
-
- * config/tc-aarch64.c (f64mm, f32mm): Add sve as a feature
- dependency.
-
-2020-01-13 Claudiu Zissulescu <claziss@gmail.com>
-
- * config/tc-arc.c (arc_select_cpu): Re-init the bfd if we change
- the CPU.
- * config/tc-arc.h: Add header if/defs.
- * testsuite/gas/arc/pseudos.d: Improve matching pattern.
-
-2020-01-13 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/wasm32/allinsn.d: Update expected output.
-
-2020-01-13 Alan Modra <amodra@gmail.com>
-
- * config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap
- insertion.
-
-2020-01-10 Alan Modra <amodra@gmail.com>
-
- * testsuite/gas/elf/pr14891.s: Don't start directives in first column.
- * testsuite/gas/elf/pr21661.d: Don't run on hpux.
-
-2020-01-03 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25224
- * config/tc-z80.c (emit_ld_m_rr): Use integer types when checking
- opcode byte values.
- (emit_ld_r_r): Likewise.
- (emit_ld_rr_m): Likewise.
- (emit_ld_rr_nn): Likewise.
-
-2020-01-09 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (optimize_encoding): Add
- is_any_vex_encoding() invocations. Drop respective
- i.tm.extension_opcode == None checks.
-
-2020-01-09 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (md_assemble): Check RegRex is clear during
- REX transformations. Correct comment indentation.
-
-2020-01-09 Jan Beulich <jbeulich@suse.com>
-
- * config/tc-i386.c (optimize_encoding): Generalize register
- transformation for TEST optimization.
-
-2020-01-09 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/i386/x86-64-sysenter-amd.s,
- testsuite/gas/i386/x86-64-sysenter-amd.d,
- testsuite/gas/i386/x86-64-sysenter-amd.l,
- testsuite/gas/i386/x86-64-sysenter-intel.d,
- testsuite/gas/i386/x86-64-sysenter-mixed.d: New.
- * testsuite/gas/i386/i386.exp: Run new tests.
-
-2020-01-08 Nick Clifton <nickc@redhat.com>
-
- PR 25284
- * doc/as.texi (Align): Document the fact that all arguments can be
- omitted.
- (Balign): Likewise.
- (P2align): Likewise.
-
-2020-01-08 Nick Clifton <nickc@redhat.com>
-
- PR 14891
- * config/obj-elf.c (obj_elf_section): Fail if the section name is
- already defined as a different symbol type.
- * testsuite/gas/elf/pr14891.s: New test source file.
- * testsuite/gas/elf/pr14891.d: New test driver.
- * testsuite/gas/elf/pr14891.s: New test expected error output.
- * testsuite/gas/elf/elf.exp: Run the new test.
-
-2020-01-08 Alan Modra <amodra@gmail.com>
-
- * config/tc-z8k.c (md_begin): Make idx unsigned.
- (get_specific): Likewise for this_index.
-
-2020-01-07 Claudiu Zissulescu <claziss@synopsys.com>
-
- * onfig/tc-arc.c (parse_reloc_symbol): New function.
- (tokenize_arguments): Clean up, use parse_reloc_symbol function.
- (md_operand): Set X_md to absent.
- (arc_parse_name): Check for X_md.
-
-2020-01-03 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- PR 25311
- * as.h (TC_STRING_ESCAPES): Provide a default definition.
- * app.c (do_scrub_chars): Use TC_STRING_ESCAPES instead of
- NO_STRING_ESCAPES.
- * read.c (next_char_of_string): Likewise.
- * config/tc-ppc.h (TC_STRING_ESCAPES): Define.
- * config/tc-z80.h (TC_STRING_ESCAPES): Define.
-
-2020-01-03 Nick Clifton <nickc@redhat.com>
-
- * po/sv.po: Updated Swedish translation.
-
-2020-01-03 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/aarch64/f64mm.s: Scale index of LD1RO{H,W,D}.
- * testsuite/gas/aarch64/f64mm.d: Adjust expectations.
-
-2020-01-03 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/aarch64/i8mm.s: Add 128-bit form tests for
- by-element usdot. Add 64-bit form tests for by-element sudot.
- * testsuite/gas/aarch64/i8mm.d: Adjust expectations.
-
-2020-01-03 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/aarch64/f64mm.s: Drop 'i' from uzip<n>.
- * testsuite/gas/aarch64/f64mm.d: Adjust expectations.
-
-2020-01-03 Jan Beulich <jbeulich@suse.com>
-
- * testsuite/gas/aarch64/f64mm.d,
- testsuite/gas/aarch64/sve-movprfx-mm.d: Adjust expectations.
-
-2020-01-02 Sergey Belyashov <sergey.belyashov@gmail.com>
-
- * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add
- support for assembler code generated by SDCC. Add new relocation
- types. Add z80-elf target support.
- * config/tc-z80.h: Add z80-elf target support. Enable dollar local
- labels. Local labels starts from ".L".
- * NEWS: Mention the new support.
- * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
- * testsuite/gas/all/fwdexp.s: Likewise.
- * testsuite/gas/all/cond.l: Likewise.
- * testsuite/gas/all/cond.s: Likewise.
- * testsuite/gas/all/fwdexp.d: Likewise.
- * testsuite/gas/all/fwdexp.s: Likewise.
- * testsuite/gas/elf/section2.e-mips: Likewise.
- * testsuite/gas/elf/section2.l: Likewise.
- * testsuite/gas/elf/section2.s: Likewise.
- * testsuite/gas/macros/app1.d: Likewise.
- * testsuite/gas/macros/app1.s: Likewise.
- * testsuite/gas/macros/app2.d: Likewise.
- * testsuite/gas/macros/app2.s: Likewise.
- * testsuite/gas/macros/app3.d: Likewise.
- * testsuite/gas/macros/app3.s: Likewise.
- * testsuite/gas/macros/app4.d: Likewise.
- * testsuite/gas/macros/app4.s: Likewise.
- * testsuite/gas/macros/app4b.s: Likewise.
- * testsuite/gas/z80/suffix.d: Fix failure on ELF target.
- * testsuite/gas/z80/z80.exp: Add new tests
- * testsuite/gas/z80/dollar.d: New file.
- * testsuite/gas/z80/dollar.s: New file.
- * testsuite/gas/z80/ez80_adl_all.d: New file.
- * testsuite/gas/z80/ez80_adl_all.s: New file.
- * testsuite/gas/z80/ez80_adl_suf.d: New file.
- * testsuite/gas/z80/ez80_isuf.s: New file.
- * testsuite/gas/z80/ez80_z80_all.d: New file.
- * testsuite/gas/z80/ez80_z80_all.s: New file.
- * testsuite/gas/z80/ez80_z80_suf.d: New file.
- * testsuite/gas/z80/r800_extra.d: New file.
- * testsuite/gas/z80/r800_extra.s: New file.
- * testsuite/gas/z80/r800_ii8.d: New file.
- * testsuite/gas/z80/r800_z80_doc.d: New file.
- * testsuite/gas/z80/z180.d: New file.
- * testsuite/gas/z80/z180.s: New file.
- * testsuite/gas/z80/z180_z80_doc.d: New file.
- * testsuite/gas/z80/z80_doc.d: New file.
- * testsuite/gas/z80/z80_doc.s: New file.
- * testsuite/gas/z80/z80_ii8.d: New file.
- * testsuite/gas/z80/z80_ii8.s: New file.
- * testsuite/gas/z80/z80_in_f_c.d: New file.
- * testsuite/gas/z80/z80_in_f_c.s: New file.
- * testsuite/gas/z80/z80_op_ii_ld.d: New file.
- * testsuite/gas/z80/z80_op_ii_ld.s: New file.
- * testsuite/gas/z80/z80_out_c_0.d: New file.
- * testsuite/gas/z80/z80_out_c_0.s: New file.
- * testsuite/gas/z80/z80_reloc.d: New file.
- * testsuite/gas/z80/z80_reloc.s: New file.
- * testsuite/gas/z80/z80_sli.d: New file.
- * testsuite/gas/z80/z80_sli.s: New file.
-
-2020-01-02 Szabolcs Nagy <szabolcs.nagy@arm.com>
-
- * config/tc-arm.c (parse_reg_list): Use REG_TYPE_RN instead of
- REGLIST_RN.
+ Update year range in copyright notice of all files.
-2020-01-01 Alan Modra <amodra@gmail.com>
+2021-01-01 Hans-Peter Nilsson <hp@bitrange.com>
- Update year range in copyright notice of all files.
+ * config/tc-mmix.h (md_single_noop_insn): Change to "swym 0".
-For older changes see ChangeLog-2019
+For older changes see ChangeLog-2020
\f
-Copyright (C) 2020 Free Software Foundation, Inc.
+Copyright (C) 2021 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
projects / thirdparty / binutils-gdb.git / blobdiff