+2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
+
+ * config/tc-arc.c (is_br_jmp_insn_p): Add check against "DBNZ".
+
+2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * doc/c-bpf.texi (BPF Instructions): There is no indirect 64-bit
+ load instruction.
+ (BPF Instructions): There is no absolute 64-bit load instruction.
+ * testsuite/gas/bpf/mem.s: Update test accordingly.
+ * testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem-be.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/mem.d: Likewise.
+ * testsuite/gas/bpf/mem.s: Likewise.
+
+2024-01-15 Nick Clifton <nickc@redhat.com>
+
+ * configure: Regenerate.
+ * po/POTFILES.in: Regenerate.
+ * po/gas.pot: Regenerate.
+
+2024-01-15 Nick Clifton <nickc@redhat.com>
+
+ * 2.42 branch point.
+
+2023-11-30 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.h (DOUBLESLASH_LINE_COMMENTS): Define.
+ * testsuite/gas/bpf/comments.s: New file.
+ * testsuite/gas/bpf/comments.d: Likewise.
+ * testsuite/gas/bpf/comments-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/comments-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/bpf.exp: Run comments and comments-pseudoc.
+ * doc/c-bpf.texi (BPF Special Characters): Document // comments.
+ * NEWS: Update.
+
+2023-11-28 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * NEWS: Add entry about change of comment syntax in the BPF
+ assembler.
+
+2023-11-28 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.c: Semicolon does not start a comment, but
+ separates multiple commands on a single line.
+ * testsuite/gas/bpf/alu-pseudoc.s: Adapt test accordingly.
+ * testsuite/gas/bpf/spacing-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/offset16-overflow.s: Likewise.
+ * testsuite/gas/bpf/jump-relax-jump.s: Likewise.
+ * testsuite/gas/bpf/jump-relax-ja.s: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp16-overflow-relax.s: Likewise.
+ * testsuite/gas/bpf/disp16-overflow.s: Likewise.
+ * doc/c-bpf.texi (BPF Special Characters): Update.
+
+2023-11-23 YunQiang Su <yunqiang.su@cipunited.com>
+
+ * testsuite/gas/mips/elf-rel.s: Use addiu in place of addi.
+ * testsuite/gas/mips/elf-rel.d: Update expected output.
+ * testsuite/gas/mips/elfel-rel.d: Likewise.
+
+2023-11-23 YunQiang Su <yunqiang.su@cipunited.com>
+
+ * testsuite/gas/mips/branch-section-1.d: Allow for r6 encoding of
+ JR instruction.
+ * testsuite/gas/mips/branch-weak-1.d: Likewise.
+ * testsuite/gas/mips/option-pic-1.d: Likewise.
+ * testsuite/gas/mips/option-pic-relax-0.d: Likewise.
+ * testsuite/gas/mips/option-pic-relax-1.d: Likewise.
+
+2023-11-18 Jose E. Marchesi <jemarch@gnu.org>
+
+ * config/tc-bpf.c (parse_bpf_register): Move before
+ bpf_parse_name.
+ (bpf_parse_name): Do not allow using symbols that are also
+ register names as operands in pseudo-c syntax.
+ * testsuite/gas/bpf/regs-for-symbols-pseudoc.d: New file.
+ * testsuite/gas/bpf/regs-for-symbols-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/regs-for-symbols-pseudoc.l: Likewise.
+ * doc/c-bpf.texi (BPF Registers): Document that it is not possible
+ to refer to register names as symbols in instruction operands.
+
+2023-11-15 YunQiang Su <yunqiang.su@cipunited.com>
+
+ * testsuite/gas/mips/mips.exp (mips_arch_create): Add "--defsym
+ r6=" to as_flags for r6 targets.
+
+2023-11-15 Arsen Arsenović <arsen@aarsen.me>
+
+ * aclocal.m4: Regenerate.
+ * configure: Regenerate.
+ * po/Make-in ($(srcdir)/$(PACKAGE).pot): Output to a .pot
+ temporary file, to suppress xgettext checking charset names.
+
+2023-11-15 YunQiang Su <yunqiang.su@cipunited.com>
+
+ * testsuite/gas/elf/elf.exp (section2): Add -mpdr option to
+ assembler command line for mips-irix targets.
+ * testsuite/gas/mips/elf-rel26.d: Add -mpdr command line option.
+ * testsuite/gas/mips/mips16-e.d: Likewise.
+ * testsuite/gas/mips/mips16-f.d: Likewise.
+ * testsuite/gas/mips/mips16-hilo-match.d: Likewise.
+ * testsuite/gas/mips/mips16-e-irix.d: Likewise.
+ * testsuite/gas/mips/call-nonpic-1.d: Adjust regexp to allow for
+ mips-irix targets.
+ * testsuite/gas/mips/irix-no-pdr.d: New test file.
+ * testsuite/gas/mips/mips.exp: Run new test for mips-irix
+ targets.
+
+2023-10-30 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/alu-pseudoc.s: Add test to make sure C-like
+ suffix `ll' is not interpreted as lddw syntax.
+ * testsuite/gas/bpf/alu-pseudoc.d: Update expected results.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+
+2023-10-02 Nick Clifton <nickc@redhat.com>
+
+ PR 30861
+ * config/tc-riscv.c (riscv_insert_uleb128_fixes): Release
+ duplicated memory.
+
+2023-09-18 Jacob Navia <jacob@jacob.remcomp.fr>
+
+ * config/tc-riscv.c (riscv_ip_hardcode): Fully initialise the
+ allocated riscv_opcode structure.
+
+2023-08-17 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.c (check_immediate_overflow): New function.
+ (encode_insn): Use check_immediate_overflow.
+ (md_assemble): Do not relax instructions with
+ constant disp16 fields.
+ * doc/c-bpf.texi (BPF Instructions): Add note about how numerical
+ literal values are interpreted for instruction immediate operands.
+ * testsuite/gas/bpf/disp16-overflow.s: Adapt accordingly.
+ * testsuite/gas/bpf/jump-relax-jump.s: Likewise.
+ * testsuite/gas/bpf/jump-relax-jump.d: Likewise.
+ * testsuite/gas/bpf/jump-relax-jump-be.d: Likewise.
+ * testsuite/gas/bpf/jump-relax-ja.s: Likewise.
+ * testsuite/gas/bpf/jump-relax-ja.d: Likewise.
+ * testsuite/gas/bpf/jump-relax-ja-be.d: Likewise.
+ * testsuite/gas/bpf/disp16-overflow-relax.l: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp16-overflow.l: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.l: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.l: Likewise.
+ * testsuite/gas/bpf/offset16-overflow.l: Likewise.
+
+2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.h (elf_tc_final_processing): Define.
+ * config/tc-bpf.c (bpf_elf_final_processing): New function.
+
+2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.c (signed_overflow): Copy function from
+ tc-aarch64.c.
+ (encode_insn): Check for overflow in constant immediates.
+ (add_relaxed_insn): Pass relax argument to encode_insn.
+ (add_fixed_insn): Likewise.
+ * testsuite/gas/bpf/disp16-overflow.d: New file.
+ * testsuite/gas/bpf/disp16-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp16-overflow.l: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.d: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.s: Likewise.
+ * testsuite/gas/bpf/disp32-overflow.l: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.d: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.s: Likewise.
+ * testsuite/gas/bpf/imm32-overflow.l: Likewise.
+ * testsuite/gas/bpf/offset16-overflow.d: Likewise.
+ * testsuite/gas/bpf/offset16-overflow.s: Likewise.
+ * testsuite/gas/bpf/offset16-overflow.l: Likewise.
+ * testsuite/gas/bpf/disp16-overflow-relax.d: Likewise.
+ * testsuite/gas/bpf/disp16-overflow-relax.l: Likewise.
+ * testsuite/gas/bpf/disp16-overflow-relax.s: Likewise.
+ * testsuite/gas/bpf/jump-relax-jump-be.d: New file.
+ * testsuite/gas/bpf/bpf.exp: Run new tests.
+
+2023-07-28 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ PR gas/30690
+ * config/tc-bpf.c (struct bpf_insn): Add fields is_relaxable and
+ relaxed_exp.
+ (enum options): Add OPTION_NO_RELAX.
+ (md_longopts): Likewise for -mno-relax.
+ (do_relax): New global.
+ (md_parse_option): Handle OPTION_NO_RELAX.
+ (RELAX_BRANCH_ENCODE): Define.
+ (RELAX_BRANCH_P): Likewise.
+ (RELAX_BRANCH_LENGTH): Likewise.
+ (RELAX_BRANCH_CONST): Likewise.
+ (RELAX_BRANCH_UNCOND): Likewise.
+ (relaxed_branch_length): New function.
+ (md_estimate_size_before_relax): Likewise.
+ (read_insn_word): Likewise.
+ (encode_int16): Likewise.
+ (encode_int32): Likewise.
+ (write_insn_bytes): Likewise.
+ (md_convert_frag): Likewise.
+ (encode_insn): Likewise.
+ (install_insn_fixups): Likewise.
+ (add_fixed_insn): Likewise.
+ (add_relaxed_insn): Likewise.
+ (md_assemble): Move instruction encoding logic to the above
+ new functions.
+ * testsuite/gas/bpf/jump-relax-ja.d: New test.
+ * testsuite/gas/bpf/jump-relax-ja-be.d: Likewise.
+ * testsuite/gas/bpf/jump-relax-ja.s: And corresponding source.
+ * testsuite/gas/bpf/jump-relax-jump.d: New test.
+ * testsuite/gas/bpf/jump-relax-jump-be.d: Likewise.
+ * testsuite/gas/bpf/jump-relax-jump.s: And corresponding source.
+ * testsuite/gas/bpf/bpf.exp: Run new tests.
+ * doc/c-bpf.texi (BPF Options): Document -mno-relax.
+
+2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/alu.s: Add test for NEGI and NEG32I.
+ * testsuite/gas/bpf/alu32.s: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu.d: Add expected results.
+ * testsuite/gas/bpf/alu-be.d: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32.d: Likewise.
+ * testsuite/gas/bpf/alu32-be.d: Likewise.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
+
+2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/alu.s: The register neg instruction gets only
+ one argument.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu-be.d: Likewise.
+ * testsuite/gas/bpf/alu.d: Likewise.
+ * testsuite/gas/bpf/alu32-be.d: Likewise.
+ * testsuite/gas/bpf/alu32.d: Likewise.
+ * testsuite/gas/bpf/alu32.s: Likewise.
+ * doc/c-bpf.texi (BPF Instructions): Update accordingly.
+
+2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * doc/c-bpf.texi (BPF Instructions): Document BSWAP* instructions.
+ * testsuite/gas/bpf/alu.s: Test BSWAP{16,32,64} instructions.
+ * testsuite/gas/bpf/alu.d: Likewise.
+ * testsuite/gas/bpf/alu-be.d: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+
+2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * doc/c-bpf.texi (BPF Instructions): The pseudoc syntax for MOVS*
+ doesn't use `s=' but `='.
+
+2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * doc/c-bpf.texi (BPF Instructions): Fix pseudoc syntax for MOVS*
+ and LDXS* instructions.
+ * testsuite/gas/bpf/mem-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
+
+2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * config/tc-bpf.c (struct bpf_insn): New field `id'.
+ (md_assemble): Save the ids of successfully parsed instructions
+ and use the new BFD_RELOC_BPF_DISPCALL32 whenever appropriate.
+ (md_apply_fix): Adapt to the new BFD reloc.
+ * testsuite/gas/bpf/jump.s: Test JAL.
+ * testsuite/gas/bpf/jump.d: Likewise.
+ * testsuite/gas/bpf/jump-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/jump-be.d: Likewise.
+ * testsuite/gas/bpf/jump-be-pseudoc.d: Likewise.
+ * doc/c-bpf.texi (BPF Instructions): Document new instruction
+ jal/gotol.
+ Document new operand type disp32.
+
+2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/mem.s: Add signed load instructions.
+ * testsuite/gas/bpf/mem-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/mem.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem-be.d: Likewise.
+ * doc/c-bpf.texi (BPF Instructions): Document the signed load
+ instructions.
+
+2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/alu.s: Test movs instructions.
+ * testsuite/gas/bpf/alu-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu32.s: Likewise for movs32 instruction.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu.d: Add expected results.
+ * testsuite/gas/bpf/alu32.d: Likewise.
+ * testsuite/gas/bpf/alu-be.d: Likewise.
+ * testsuite/gas/bpf/alu32-be.d: Likewise.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
+
+2023-07-03 Nick Clifton <nickc@redhat.com>
+
+ * configure: Regenerate.
+ * po/gas.pot: Regenerate.
+
+2023-07-03 Nick Clifton <nickc@redhat.com>
+
+ 2.41 Branch Point.
+
+2023-06-26 Nick Clifton <nickc@redhat.com>
+
+ * testsuite/gas/aarch64/bfloat16-directive-be.d: Adjust regexps
+ to allow for non-ELF based toolchains.
+ * testsuite/gas/aarch64/bfloat16-directive-le.d: Likewise.
+ * testsuite/gas/aarch64/optional.d: Likewise.
+ * testsuite/gas/aarch64/pr20364.d: Likewise.
+ * testsuite/gas/aarch64/adr_1.d: Skip for non-ELF based toolchains.
+ * testsuite/gas/aarch64/advsimd-mov-bad.d: Likewise.
+ * testsuite/gas/aarch64/b_1.d: Likewise.
+ * testsuite/gas/aarch64/beq_1.d: Likewise.
+ * testsuite/gas/aarch64/codealign_1.d: Likewise.
+ * testsuite/gas/aarch64/dwarf.d: Likewise.
+ * testsuite/gas/aarch64/ilp32-basic.d: Likewise.
+ * testsuite/gas/aarch64/int-insns.d: Likewise.
+ * testsuite/gas/aarch64/ldr_1.d: Likewise.
+ * testsuite/gas/aarch64/mapping_5.d: Likewise.
+ * testsuite/gas/aarch64/mapping_6.d: Likewise.
+ * testsuite/gas/aarch64/mops_invalid_2.d: Likewise.
+ * testsuite/gas/aarch64/movw_label.d: Likewise.
+ * testsuite/gas/aarch64/pac_ab_key.d: Likewise.
+ * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
+ * testsuite/gas/aarch64/pr27217.d: Likewise.
+ * testsuite/gas/aarch64/pr29519.d: Likewise.
+ * testsuite/gas/aarch64/programmer-friendly.d: Likewise.
+ * testsuite/gas/aarch64/reloc-data.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g0-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g0.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g0_nc-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g1-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g1_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_g2.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_hi12-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_hi12.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-ilp32-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst16.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst64.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst8.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst16.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst64.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst8.d: Likewise.
+ * testsuite/gas/aarch64/reloc-dtprel_lo12_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-gotoff_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-gotoff_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-gottprel_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-gottprel_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-insn.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g0.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g1_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g2.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g2_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-prel_g3.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsdesc_off_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsdesc_off_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsgd_g0_nc.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsgd_g1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm-ilp32-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm-page-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm-page-ilp32-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-ilp32-1.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst16-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst16.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst32-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst64-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst64.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst8-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12-ldst8.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8-ilp32.d: Likewise.
+ * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_1.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_10.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_11.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_12.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_13.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_14.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_15.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_16.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_17.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_18.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_19.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_2.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_20.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_21.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_22.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_23.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_24.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_25.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_26.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_27.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_28.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_3.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_4.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_5.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_6.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_7.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_8.d: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_9.d: Likewise.
+ * testsuite/gas/aarch64/symbol-variant_pcs-1.d: Likewise.
+ * testsuite/gas/aarch64/symbol-variant_pcs-2.d: Likewise.
+ * testsuite/gas/aarch64/symbol-variant_pcs-3.d: Likewise.
+ * testsuite/gas/aarch64/system.d: Likewise.
+ * testsuite/gas/aarch64/tail_padding.d: Likewise.
+ * testsuite/gas/aarch64/tbz_1.d: Likewise.
+ * testsuite/gas/aarch64/tls-desc.d: Likewise.
+ * testsuite/gas/aarch64/tls.d: Likewise.
+
+2023-04-27 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/mem.dump: New file.
+ * testsuite/gas/bpf/mem-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem.d: #dump mem.dump.
+ * testsuite/gas/bpf/lddw.dump: New file.
+ * testsuite/gas/bpf/lddw-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/lddw.d: #dump lddw.dump.
+ * testsuite/gas/bpf/jump.dump: New file.
+ * testsuite/gas/bpf/jump-pseudoc.d: Likewise
+ * testsuite/gas/bpf/jump.d: #dump jump.dump.
+ * testsuite/gas/bpf/jump32.dump: New file.
+ * testsuite/gas/bpf/jump32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/jump32.d: #dump jump32.dump.
+ * testsuite/gas/bpf/lddw-be.dump: New file.
+ * testsuite/gas/bpf/lddw-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/lddw-be.d: #dump lddw-be.dump.
+ * testsuite/gas/bpf/indcall-1.dump: New file.
+ * testsuite/gas/bpf/indcall-1-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/indcall-1.d: #dump indcall-1.dump.
+ * testsuite/gas/bpf/indcall-1-pseudoc.s (main): Fix lddw
+ instruction.
+ * testsuite/gas/bpf/atomic.dump: New file.
+ * testsuite/gas/bpf/atomic-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/atomic.d: #dump atomic.dump.
+ * testsuite/gas/bpf/alu32.dump: New file.
+ * testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32.d: #dump alu32.dump.
+ * testsuite/gas/bpf/alu.dump: New file.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu.d: #dump alu.dump.
+
+ * testsuite/gas/bpf/alu-be.dump: New file.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be.d: #dump alu-be.dump.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: New file.
+ * testsuite/gas/bpf/alu32-be-dump: Likewise.
+ * testsuite/gas/bpf/alu32-be.d: #dump alu32-be-dump.
+ * testsuite/gas/bpf/bpf.exp: Run *-pseudoc tests.
+
+2023-04-19 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ PR gas/29757
+ * doc/c-bpf.texi (BPF Pseudo-C Syntax): New section.
+
+2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ PR gas/29728
+ * testsuite/gas/all/assign-bad-recursive.d: Skip test in bpf-*
+ targets.
+ * testsuite/gas/all/eqv-dot.d: Likewise.
+ * testsuite/gas/all/gas.exp: Skip other assignment tests in bpf-*.
+ * testsuite/gas/bpf/alu-pseudoc.s: New file.
+ * testsuite/gas/bpf/pseudoc-normal.s: Likewise.
+ * testsuite/gas/bpf/pseudoc-normal.d: Likewise.
+ * testsuite/gas/bpf/pseudoc-normal-be.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/lddw-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/jump32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/jump-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/indcall-1-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/atomic-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/*.d: Add -pseudoc variants of the tests.
+
+2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ PR gas/29728
+ * config/tc-bpf.h (TC_EQUAL_IN_INSN): Define.
+ * config/tc-bpf.c (LEX_IS_SYMBOL_COMPONENT): Define.
+ (LEX_IS_WHITESPACE): Likewise.
+ (LEX_IS_NEWLINE): Likewise.
+ (LEX_IS_ARITHM_OP): Likewise.
+ (LEX_IS_STAR): Likewise.
+ (LEX_IS_CLSE_BR): Likewise.
+ (LEX_IS_OPEN_BR): Likewise.
+ (LEX_IS_EQUAL): Likewise.
+ (LEX_IS_EXCLA): Likewise.
+ (ST_EOI): Likewise.
+ (MAX_TOKEN_SZ): Likewise.
+ (init_pseudoc_lex): New function.
+ (md_begin): Call init_pseudoc_lex.
+ (valid_expr): New function.
+ (build_bpf_non_generic_load): Likewise.
+ (build_bpf_atomic_insn): Likewise.
+ (build_bpf_jmp_insn): Likewise.
+ (build_bpf_arithm_insn): Likewise.
+ (build_bpf_endianness): Likewise.
+ (build_bpf_load_store_insn): Likewise.
+ (look_for_reserved_word): Likewise.
+ (is_register): Likewise.
+ (is_cast): Likewise.
+ (get_token): Likewise.
+ (bpf_pseudoc_to_normal_syntax): Likewise.
+ (md_assemble): Try pseudo-C syntax if an instruction cannot be
+ parsed.
+
+2023-04-18 mengqinggang <mengqinggang@loongson.cn>
+
+ * config/tc-loongarch.c (loongarch_fix_adjustable): Symbols with
+ GOT relocatios do not fix adjustbale.
+ * testsuite/gas/loongarch/macro_op_large_abs.d: Regenerated.
+ * testsuite/gas/loongarch/macro_op_large_pc.d: Regenerated.
+
+2023-04-18 Thomas Koenig <tkoenig@netcologne.de>
+
+ * doc/internals.texi (Relaxing with a table): Describe handling of
+ opcodes for relaxation a bit better.
+
+2023-04-13 Claudiu Zissulescu <claziss@synopsys.com>
+
+ * testsuite/gas/cfi/cfi-arc-1.s: Use baseline instructions.
+ * testsuite/gas/cfi/cfi-arc-1.d: Update matching patterns.
+
+2023-04-13 Claudiu Zissulescu <claziss@synopsys.com>
+
+ * testsuite/gas/arc/dsp.s: Remove unimplemented dsp instructions.
+ * testsuite/gas/arc/dsp.d: Update the test.
+
+2023-03-14 Nick Clifton <nickc@redhat.com>
+
+ PR 30206
+ * doc/as.texi (Pseudo Ops): Document that data directives such as
+ .byte and .int are not intended for encoding instructions.
+
+2023-02-28 Richard Ball <richard.ball@arm.com>
+
+ * testsuite/gas/aarch64/mec-invalid.d: New test.
+ * testsuite/gas/aarch64/mec-invalid.l: New test.
+ * testsuite/gas/aarch64/mec-invalid.s: New test.
+ * testsuite/gas/aarch64/mec.d: New test.
+ * testsuite/gas/aarch64/mec.s: New test.
+
+2023-02-27 Benson Muite <benson_muite@emailplus.org>
+
+ PR 28909
+ * doc/local.mk (asconfig.texi): Use "cp -p" to preserve
+ timestamps.
+ * Makefile.in: Regenerate.
+
+2023-02-01 Nick Clifton <nickc@redhat.com>
+
+ * dwarf2dbg.c (emit_inc_line_addr): Use unsigned constants when
+ checking addr_delta.
+
+2023-01-20 Frederic Cambus <fred@statdns.com>
+
+ * configure.tgt (arm-*-openbsd*): Add target.
+
+2023-01-16 Nick Clifton <nickc@redhat.com>
+
+ * po/ru.po: Updated Russian translation.
+
+2023-01-03 Nick Clifton <nickc@redhat.com>
+
+ PR 29952
+ * config/tc-i386.c (md_assemble): Avoid constructing translatable
+ strings.
+
+2023-01-03 Nick Clifton <nickc@redhat.com>
+
+ * po/fr.po: Updated French translation.
+ * po/uk.po: Updated Ukrainian translation.
+
+2022-12-31 Nick Clifton <nickc@redhat.com>
+
+ * 2.40 branch created.
+
+2022-11-21 Nick Clifton <nickc@redhat.com>
+
+ PR 29764
+ * testsuite/gas/arm/cpu-cortex-a76ae.d: Add arm prefix to the -m
+ option passed to objdump.
+ * testsuite/gas/arm/cpu-cortex-a77.d: Likewise.
+ * testsuite/gas/aarch64/cpu-cortex-a76ae.d: Add aarch64 prefix to
+ the -m option passed to objdump.
+ * testsuite/gas/aarch64/cpu-cortex-a77.d: Likewise.
+
+2022-10-31 Nick Clifton <nickc@redhat.com>
+
+ * testsuite/gas/rx/mvtacgu.d: Update expected disassembly.
+
+2022-10-11 Nick Clifton <nickc@redhat.com>
+
+ * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake
+ label provide a more helpful error message to the user.
+ (S_GET_VALUE_WHERE): Like S_GET_VALUE, but includes a file/line
+ number for error reporting purposes.
+ * symbols.h (S_GET_VALUE_WHERE): Prototype.
+ * write.c (fixup_segment): Use S_GET_VALUE_WHERE.
+
+2022-09-28 Nick Clifton <nickc@redhat.com>
+
+ PR 29623
+ * as.c (show_usage): Document the --dump-config,
+ --gdwarf-cie-version, --hash-size, --multibyte-handling,
+ and --reduce-memory-overheads options.
+ * config/tc-i386.c (md_show_usage): Document the -O option.
+ * doc/as.texi: Document the --dump-config, --emulation,
+ --hash-size, and --reduce-memory-overheads options.
+
+2022-09-08 Nick Clifton <nickc@redhat.com>
+
+ PR 29559
+ * dwarf2dbg.c (out_debug_info): Place DW_TAG_unspecified_type at
+ the end of the list of children, not at the start of the CU
+ information.
+ * testsuite/gas/elf/dwarf-3-func.d: Update expected output.
+ * testsuite/gas/elf/dwarf-5-func-global.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func-local.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func.d: Likewise.
+
+2022-08-31 Frederic Cambus <fred@statdns.com>
+
+ * configure.tgt (aarch64*-*-openbsd*): Add target.
+
+2022-08-30 Nick Clifton <nickc@redhat.com>
+
+ PR 29494
+ * testsuite/gas/arm/pr29494.s: New test source file.
+ * testsuite/gas/arm/pr29494.d: New test driver.
+
+2022-08-25 Nick Clifton <nickc@redhat.com>
+
+ PR 29517
+ * dwarf2dbg.c (GAS_ABBREV_COMP_UNIT): New defined constant.
+ (GAS_ABBREV_SUBPROG): New defined constant.
+ (GAS_ABBREV_NO_TYPE): New defined constant.
+ (out_debug_abbrev): Use the new defined constants when emitting
+ abbreviation numbers. Generate an abbreviation for an unspecified
+ type.
+ (out_debug_info): Use the new defined constants when referring to
+ abbreviations. Generate a use of the no_type abbreviation.
+ Reference the use when generating DIEs for functions.
+ * testsuite/gas/elf/dwarf-3-func.d: Update to allow for newly
+ extended output from the assembler.
+ * testsuite/gas/elf/dwarf-5-func-global.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func-local.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func.d: Likewise.
+
+2022-08-25 Nick Clifton <nickc@redhat.com>
+
+ PR 29519
+ * config/tc-aarch64.c (s_unreq): Use find_end_of_line().
+ (s_aarch64_cpu): Likewise.
+ (s_aarch64_arch): Likewise.
+ (s_aarch64_arch_extension): Likewise.
+ * testsuite/gas/aarch64/pr29519.d: New test driver file.
+ * testsuite/gas/aarch64/pr29519.s: New test source file.
+
+2022-08-08 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ * config/obj-macho.c (obj_mach_o_get_section_names): Wrap two
+ string literals within with gettext macro.
+
+2022-08-05 Nick Clifton <nickc@redhat.com>
+
+ PR 29447
+ * read.c (read_symbol_name): Pass 0 as the length parameter when
+ invoking mbstowc in order to check the validity of a wide string.
+
+2022-07-18 Claudiu Zissulescu <claziss@synopsys.com>
+
+ * config/tc-arc.c (md_assembly): Update strspn string with the
+ missing ciphers.
+
+2022-07-08 Nick Clifton <nickc@redhat.com>
+
+ * 2.39 branch created.
+
+2022-05-18 Victor Do Nascimento <victor.donascimento@arm.com>
+
+ * config/tc-arm.c (parse_reg_list): Add handling of mixed register
+ types.
+ (reg_names): Enumerate pseudoregister according to mapped physical
+ register number.
+ (s_arm_unwind_save_pseudo): Modify function signature.
+ (s_arm_unwind_save_core): Likewise.
+ (s_arm_unwind_save_mixed): New function.
+ (s_arm_unwind_save): Generate register list mask to pass to nested
+ functions.
+ * testsuite/gas/arm/unwind-pacbti-m.s: Expand test for mixed
+ register type lists.
+ * testsuite/gas/arm/unwind-pacbti-m.d: Likewise.
+ * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Likewise.
+
+2022-04-07 Mark Harmstone <mark@harmstone.com>
+
+ * config/tc-i386.c (pe_directive_secidx): New function.
+ (md_pseudo_table): Add support for secidx.
+ (x86_cons_fix_new): Likewise.
+ (tc_gen_reloc): Likewise.
+ * expr.c (op_rank): Add O_secidx.
+ * expr.h (operatorT): Likewise.
+ * symbols.c (resolve_symbol_value): Add support for O_secidx.
+ * testsuite/gas/i386/secidx.s: New test source file.
+ * testsuite/gas/i386/secidx.d: New test driver file.
+ * testsuite/gas/i386/i386.exp: Run new test.
+
+2022-04-07 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ * config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU
+ name.
+ * doc/as.texi: Add z16 and arch14 to CPU string list.
+ * doc/c-s390.texi: Add z16 to CPU string list.
+
+2022-04-06 Nick Clifton <nickc@redhat.com>
+
+ PR 28981
+ * testsuite/gas/elf/dwarf-5-irp.d: Update expected output.
+
+2022-03-21 Nick Clifton <nickc@redhat.com>
+
+ PR 28791
+ * config/tc-z80.c (emit_data_val): Do not warn about overlarge
+ constants generated by bit manipulation operators.
+ * testsuite/gas/z80/pr28791.s: New test source file.
+ * testsuite/gas/z80/pr28791.d: New test driver file.
+
+2022-01-28 Nick Clifton <nickc@redhat.com>
+
+ * po/fr.po: Updated French translation.
+
+2022-01-24 Nick Clifton <nickc@redhat.com>
+
+ * po/uk.po: Updated Ukranian translation.
+
2022-01-22 Nick Clifton <nickc@redhat.com>
* configure: Regenerate.
For older changes see ChangeLog-2020
\f
-Copyright (C) 2021-2022 Free Software Foundation, Inc.
+Copyright (C) 2021-2024 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
projects / thirdparty / binutils-gdb.git / blobdiff