/* ECOFF object file format.
- Copyright (C) 1993, 1994 Free Software Foundation, Inc.
+ Copyright (C) 1993-2022 Free Software Foundation, Inc.
Contributed by Cygnus Support.
This file was put together by Ian Lance Taylor <ian@cygnus.com>.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+#define OBJ_HEADER "obj-ecoff.h"
#include "as.h"
#include "coff/internal.h"
#include "bfd/libcoff.h"
#include "bfd/libecoff.h"
+#include "bfd/ecoff-bfd.h"
/* Almost all of the ECOFF support is actually in ecoff.c in the main
gas directory. This file mostly just arranges to call that one at
the right times. */
-/* These are the pseudo-ops we support in this file. Only those
- relating to debugging information are supported here.
+/* Set section VMAs and GP values before reloc processing. */
- The following pseudo-ops from the Kane and Heinrich MIPS book
- should be defined here, but are currently unsupported: .aent,
- .bgnb, .endb, .verstamp, .vreg.
+void
+ecoff_frob_file_before_fix (void)
+{
+ bfd_vma addr;
+ asection *sec;
- The following pseudo-ops from the Kane and Heinrich MIPS book are
- MIPS CPU specific, and should be defined by tc-mips.c: .alias,
- .extern, .galive, .gjaldef, .gjrlive, .livereg, .noalias, .option,
- .rdata, .sdata, .set.
+ /* Set the section VMA values. We force the .sdata and .sbss
+ sections to the end to ensure that their VMA addresses are close
+ together so that the GP register can address both of them. We
+ put the .bss section after the .sbss section.
- The following pseudo-ops from the Kane and Heinrich MIPS book are
- not MIPS CPU specific, but are also not ECOFF specific. I have
- only listed the ones which are not already in read.c. It's not
- completely clear where these should be defined, but tc-mips.c is
- probably the most reasonable place: .asciiz, .asm0, .endr, .err,
- .half, .lab, .repeat, .struct, .weakext. */
+ Also, for the Alpha, we must sort the sections, to make sure they
+ appear in the output file in the correct order. (Actually, maybe
+ this is a job for BFD. But the VMAs computed would be out of
+ whack if we computed them given our initial, random ordering.
+ It's possible that that wouldn't break things; I could do some
+ experimenting sometime and find out.
-const pseudo_typeS obj_pseudo_table[] =
-{
- /* COFF style debugging information. .ln is not used; .loc is used
- instead. */
- { "def", ecoff_directive_def, 0 },
- { "dim", ecoff_directive_dim, 0 },
- { "endef", ecoff_directive_endef, 0 },
- { "file", ecoff_directive_file, 0 },
- { "scl", ecoff_directive_scl, 0 },
- { "size", ecoff_directive_size, 0 },
- { "tag", ecoff_directive_tag, 0 },
- { "type", ecoff_directive_type, 0 },
- { "val", ecoff_directive_val, 0 },
+ This output ordering of sections is magic, on the Alpha, at
+ least. The .lita section must come before .lit8 and .lit4,
+ otherwise the OSF/1 linker may silently trash the .lit{4,8}
+ section contents. Also, .text must precede .rdata. These differ
+ from the order described in some parts of the DEC OSF/1 Assembly
+ Language Programmer's Guide, but that order doesn't seem to work
+ with their linker.
- /* ECOFF specific debugging information. */
- { "begin", ecoff_directive_begin, 0 },
- { "bend", ecoff_directive_bend, 0 },
- { "end", ecoff_directive_end, 0 },
- { "ent", ecoff_directive_ent, 0 },
- { "fmask", ecoff_directive_fmask, 0 },
- { "frame", ecoff_directive_frame, 0 },
- { "loc", ecoff_directive_loc, 0 },
- { "mask", ecoff_directive_mask, 0 },
+ I don't know if section ordering on the MIPS is important. */
- /* These are used on Irix. I don't know how to implement them. */
- { "bgnb", s_ignore, 0 },
- { "endb", s_ignore, 0 },
- { "verstamp", s_ignore, 0 },
+ static const char *const names[] =
+ {
+ /* text segment */
+ ".text", ".rdata", ".init", ".fini",
+ /* data segment */
+ ".data", ".lita", ".lit8", ".lit4", ".sdata", ".got",
+ /* bss segment */
+ ".sbss", ".bss",
+ };
+#define n_names ((int) (sizeof (names) / sizeof (names[0])))
- /* Sentinel. */
- { NULL }
-};
+ /* Sections that match names, order to be straightened out later. */
+ asection *secs[n_names];
+ int i;
+
+ addr = 0;
+ for (i = 0; i < n_names; i++)
+ secs[i] = NULL;
+
+ for (sec = stdoutput->sections; sec != NULL; sec = sec->next)
+ {
+ for (i = 0; i < n_names; i++)
+ if (!strcmp (sec->name, names[i]))
+ {
+ secs[i] = sec;
+ bfd_section_list_remove (stdoutput, sec);
+ break;
+ }
+ if (i == n_names)
+ {
+ bfd_set_section_vma (sec, addr);
+ addr += bfd_section_size (sec);
+ }
+ }
+ for (i = 0; i < n_names; i++)
+ if (secs[i])
+ {
+ bfd_set_section_vma (secs[i], addr);
+ addr += bfd_section_size (secs[i]);
+ }
+ for (i = n_names - 1; i >= 0; i--)
+ if (secs[i])
+ bfd_section_list_prepend (stdoutput, secs[i]);
+
+ /* Fill in the register masks. */
+ {
+ unsigned long gprmask = 0;
+ unsigned long fprmask = 0;
+ unsigned long *cprmask = NULL;
+
+#ifdef TC_MIPS
+ /* Fill in the MIPS register masks. It's probably not worth
+ setting up a generic interface for this. */
+ gprmask = mips_gprmask;
+ cprmask = mips_cprmask;
+#endif
+
+#ifdef TC_ALPHA
+ alpha_frob_ecoff_data ();
+
+ if (! bfd_ecoff_set_gp_value (stdoutput, alpha_gp_value))
+ as_fatal (_("Can't set GP value"));
+
+ gprmask = alpha_gprmask;
+ fprmask = alpha_fprmask;
+#endif
+
+ if (! bfd_ecoff_set_regmasks (stdoutput, gprmask, fprmask, cprmask))
+ as_fatal (_("Can't set register masks"));
+ }
+}
/* Swap out the symbols and debugging information for BFD. */
void
-ecoff_frob_file ()
+ecoff_frob_file (void)
{
const struct ecoff_debug_swap * const debug_swap
= &ecoff_backend (stdoutput)->debug_swap;
- bfd_vma addr;
- asection *sec;
+ bfd_vma addr ATTRIBUTE_UNUSED;
HDRR *hdr;
char *buf;
char *set;
- /* Set the section VMA values. */
- addr = 0;
- for (sec = stdoutput->sections; sec != (asection *) NULL; sec = sec->next)
- {
- bfd_set_section_vma (stdoutput, sec, addr);
- addr += bfd_section_size (stdoutput, sec);
- }
-
/* Build the ECOFF debugging information. */
+ gas_assert (ecoff_data (stdoutput) != 0);
hdr = &ecoff_data (stdoutput)->debug_info.symbolic_header;
ecoff_build_debug (hdr, &buf, debug_swap);
set = buf;
#define SET(ptr, count, type, size) \
if (hdr->count == 0) \
- ecoff_data (stdoutput)->debug_info.ptr = (type) NULL; \
+ ecoff_data (stdoutput)->debug_info.ptr = NULL; \
else \
{ \
ecoff_data (stdoutput)->debug_info.ptr = (type) set; \
}
SET (line, cbLine, unsigned char *, sizeof (unsigned char));
- SET (external_dnr, idnMax, PTR, debug_swap->external_dnr_size);
- SET (external_pdr, ipdMax, PTR, debug_swap->external_pdr_size);
- SET (external_sym, isymMax, PTR, debug_swap->external_sym_size);
- SET (external_opt, ioptMax, PTR, debug_swap->external_opt_size);
+ SET (external_dnr, idnMax, void *, debug_swap->external_dnr_size);
+ SET (external_pdr, ipdMax, void *, debug_swap->external_pdr_size);
+ SET (external_sym, isymMax, void *, debug_swap->external_sym_size);
+ SET (external_opt, ioptMax, void *, debug_swap->external_opt_size);
SET (external_aux, iauxMax, union aux_ext *, sizeof (union aux_ext));
SET (ss, issMax, char *, sizeof (char));
SET (ssext, issExtMax, char *, sizeof (char));
- SET (external_rfd, crfd, PTR, debug_swap->external_rfd_size);
- SET (external_fdr, ifdMax, PTR, debug_swap->external_fdr_size);
- SET (external_ext, iextMax, PTR, debug_swap->external_ext_size);
-
+ SET (external_rfd, crfd, void *, debug_swap->external_rfd_size);
+ SET (external_fdr, ifdMax, void *, debug_swap->external_fdr_size);
+ SET (external_ext, iextMax, void *, debug_swap->external_ext_size);
#undef SET
-
- /* Fill in the register masks. */
- {
- asection *regsec;
- struct ecoff_reginfo s;
-
- regsec = bfd_make_section (stdoutput, REGINFO);
- know (regsec != NULL);
-
- if (bfd_get_section_contents (stdoutput, regsec, (PTR) &s,
- (file_ptr) 0, sizeof s) == false)
- as_fatal ("Can't read REGINFO section");
-
-#ifdef TC_MIPS
- /* Fill in the MIPS register masks. It's probably not worth
- setting up a generic interface for this. */
- s.gprmask = mips_gprmask;
- s.cprmask[0] = mips_cprmask[0];
- s.cprmask[1] = mips_cprmask[1];
- s.cprmask[2] = mips_cprmask[2];
- s.cprmask[3] = mips_cprmask[3];
-#endif
-
- if (bfd_set_section_contents (stdoutput, regsec, (PTR) &s,
- (file_ptr) 0, sizeof s) == false)
- as_fatal ("Can't write REGINFO section");
- }
}
/* This is called by the ECOFF code to set the external information
information to be stored in the native field of the symbol. */
void
-obj_ecoff_set_ext (sym, ext)
- symbolS *sym;
- EXTR *ext;
+obj_ecoff_set_ext (symbolS *sym, EXTR *ext)
{
const struct ecoff_debug_swap * const debug_swap
= &ecoff_backend (stdoutput)->debug_swap;
ecoff_symbol_type *esym;
- know (bfd_asymbol_flavour (sym->bsym) == bfd_target_ecoff_flavour);
- esym = ecoffsymbol (sym->bsym);
+ know (bfd_asymbol_flavour (symbol_get_bfdsym (sym))
+ == bfd_target_ecoff_flavour);
+ esym = ecoffsymbol (symbol_get_bfdsym (sym));
esym->local = false;
esym->native = xmalloc (debug_swap->external_ext_size);
(*debug_swap->swap_ext_out) (stdoutput, ext, esym->native);
}
+
+static int
+ecoff_sec_sym_ok_for_reloc (asection *sec ATTRIBUTE_UNUSED)
+{
+ return 1;
+}
+
+static void
+obj_ecoff_frob_symbol (symbolS *sym, int *puntp ATTRIBUTE_UNUSED)
+{
+ ecoff_frob_symbol (sym);
+}
+
+static void
+ecoff_pop_insert (void)
+{
+ pop_insert (obj_pseudo_table);
+}
+
+static int
+ecoff_separate_stab_sections (void)
+{
+ return 0;
+}
+
+/* These are the pseudo-ops we support in this file. Only those
+ relating to debugging information are supported here.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book
+ should be defined here, but are currently unsupported: .bgnb,
+ .endb, .verstamp, .vreg.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book are
+ MIPS CPU specific, and should be defined by tc-mips.c: .alias,
+ .extern, .galive, .gjaldef, .gjrlive, .livereg, .noalias, .option,
+ .rdata, .sdata, .set.
+
+ The following pseudo-ops from the Kane and Heinrich MIPS book are
+ not MIPS CPU specific, but are also not ECOFF specific. I have
+ only listed the ones which are not already in read.c. It's not
+ completely clear where these should be defined, but tc-mips.c is
+ probably the most reasonable place: .asciiz, .asm0, .endr, .err,
+ .half, .lab, .repeat, .struct, .weakext. */
+
+const pseudo_typeS obj_pseudo_table[] =
+{
+ /* COFF style debugging information. .ln is not used; .loc is used
+ instead. */
+ { "def", ecoff_directive_def, 0 },
+ { "dim", ecoff_directive_dim, 0 },
+ { "endef", ecoff_directive_endef, 0 },
+ { "file", ecoff_directive_file, 0 },
+ { "scl", ecoff_directive_scl, 0 },
+ { "size", ecoff_directive_size, 0 },
+ { "esize", ecoff_directive_size, 0 },
+ { "tag", ecoff_directive_tag, 0 },
+ { "type", ecoff_directive_type, 0 },
+ { "etype", ecoff_directive_type, 0 },
+ { "val", ecoff_directive_val, 0 },
+
+ /* ECOFF specific debugging information. */
+ { "aent", ecoff_directive_ent, 1 },
+ { "begin", ecoff_directive_begin, 0 },
+ { "bend", ecoff_directive_bend, 0 },
+ { "end", ecoff_directive_end, 0 },
+ { "ent", ecoff_directive_ent, 0 },
+ { "fmask", ecoff_directive_fmask, 0 },
+ { "frame", ecoff_directive_frame, 0 },
+ { "loc", ecoff_directive_loc, 0 },
+ { "mask", ecoff_directive_mask, 0 },
+
+ /* Other ECOFF directives. */
+ { "extern", ecoff_directive_extern, 0 },
+
+#ifndef TC_MIPS
+ /* For TC_MIPS, tc-mips.c adds this. */
+ { "weakext", ecoff_directive_weakext, 0 },
+#endif
+
+ /* These are used on Irix. I don't know how to implement them. */
+ { "bgnb", s_ignore, 0 },
+ { "endb", s_ignore, 0 },
+ { "verstamp", s_ignore, 0 },
+
+ /* Sentinel. */
+ { NULL, s_ignore, 0 }
+};
+
+const struct format_ops ecoff_format_ops =
+{
+ bfd_target_ecoff_flavour,
+ 0, /* dfl_leading_underscore. */
+
+ /* FIXME: A comment why emit_section_symbols is different here (1) from
+ the single-format definition (0) would be in order. */
+ 1, /* emit_section_symbols. */
+ 0, /* begin. */
+ ecoff_new_file,
+ obj_ecoff_frob_symbol,
+ ecoff_frob_file,
+ 0, /* frob_file_before_adjust. */
+ ecoff_frob_file_before_fix,
+ 0, /* frob_file_after_relocs. */
+ 0, /* s_get_size. */
+ 0, /* s_set_size. */
+ 0, /* s_get_align. */
+ 0, /* s_set_align. */
+ 0, /* s_get_other. */
+ 0, /* s_set_other. */
+ 0, /* s_get_desc. */
+ 0, /* s_set_desc. */
+ 0, /* s_get_type. */
+ 0, /* s_set_type. */
+ 0, /* copy_symbol_attributes. */
+ ecoff_generate_asm_lineno,
+ ecoff_stab,
+ ecoff_separate_stab_sections,
+ 0, /* init_stab_section. */
+ ecoff_sec_sym_ok_for_reloc,
+ ecoff_pop_insert,
+ ecoff_set_ext,
+ ecoff_read_begin_hook,
+ ecoff_symbol_new_hook,
+ ecoff_symbol_clone_hook,
+ 0 /* adjust_symtab. */
+};
projects / thirdparty / binutils-gdb.git / blobdiff