/* tc-ppc.c -- Assemble for the PowerPC or POWER (RS/6000)
- Copyright (C) 1994-2020 Free Software Foundation, Inc.
+ Copyright (C) 1994-2021 Free Software Foundation, Inc.
Written by Ian Lance Taylor, Cygnus Support.
This file is part of GAS, the GNU Assembler.
#include "dwarf2dbg.h"
#endif
-#ifdef TE_PE
-#include "coff/pe.h"
-#endif
-
#ifdef OBJ_XCOFF
#include "coff/xcoff.h"
#include "libxcoff.h"
/* Whether to use user friendly register names. */
#ifndef TARGET_REG_NAMES_P
-#ifdef TE_PE
-#define TARGET_REG_NAMES_P TRUE
-#else
#define TARGET_REG_NAMES_P FALSE
#endif
-#endif
/* Macros for calculating LO, HI, HA, HIGHER, HIGHERA, HIGHEST,
HIGHESTA. */
static void ppc_elf_abiversion (int);
static void ppc_elf_gnu_attribute (int);
#endif
-
-#ifdef TE_PE
-static void ppc_previous (int);
-static void ppc_pdata (int);
-static void ppc_ydata (int);
-static void ppc_reldata (int);
-static void ppc_rdata (int);
-static void ppc_ualong (int);
-static void ppc_znop (int);
-static void ppc_pe_comm (int);
-static void ppc_pe_section (int);
-static void ppc_pe_function (int);
-static void ppc_pe_tocd (int);
-#endif
\f
/* Generic assembler global variables which must be defined by all
targets. */
{ "gnu_attribute", ppc_elf_gnu_attribute, 0},
#endif
-#ifdef TE_PE
- /* Pseudo-ops specific to the Windows NT PowerPC PE (coff) format. */
- { "previous", ppc_previous, 0 },
- { "pdata", ppc_pdata, 0 },
- { "ydata", ppc_ydata, 0 },
- { "reldata", ppc_reldata, 0 },
- { "rdata", ppc_rdata, 0 },
- { "ualong", ppc_ualong, 0 },
- { "znop", ppc_znop, 0 },
- { "comm", ppc_pe_comm, 0 },
- { "lcomm", ppc_pe_comm, 1 },
- { "section", ppc_pe_section, 0 },
- { "function", ppc_pe_function,0 },
- { "tocd", ppc_pe_tocd, 0 },
-#endif
-
#if defined (OBJ_XCOFF) || defined (OBJ_ELF)
{ "tc", ppc_tc, 0 },
{ "machine", ppc_machine, 0 },
static const struct pd_reg pre_defined_registers[] =
{
+ /* VSX accumulators. */
+ { "a0", 0, PPC_OPERAND_ACC },
+ { "a1", 1, PPC_OPERAND_ACC },
+ { "a2", 2, PPC_OPERAND_ACC },
+ { "a3", 3, PPC_OPERAND_ACC },
+ { "a4", 4, PPC_OPERAND_ACC },
+ { "a5", 5, PPC_OPERAND_ACC },
+ { "a6", 6, PPC_OPERAND_ACC },
+ { "a7", 7, PPC_OPERAND_ACC },
+
/* Condition Registers */
{ "cr.0", 0, PPC_OPERAND_CR_REG },
{ "cr.1", 1, PPC_OPERAND_CR_REG },
static unsigned int ppc_obj64 = BFD_DEFAULT_TARGET_SIZE == 64;
/* Opcode hash table. */
-static struct hash_control *ppc_hash;
+static htab_t ppc_hash;
/* Macro hash table. */
-static struct hash_control *ppc_macro_hash;
+static htab_t ppc_macro_hash;
#ifdef OBJ_ELF
/* What type of shared library support to use. */
} dw_sections[XCOFF_DWSECT_NBR_NAMES];
#endif /* OBJ_XCOFF */
-#ifdef TE_PE
-
-/* Various sections that we need for PE coff support. */
-static segT ydata_section;
-static segT pdata_section;
-static segT reldata_section;
-static segT rdata_section;
-static segT tocdata_section;
-
-/* The current section and the previous section. See ppc_previous. */
-static segT ppc_previous_section;
-static segT ppc_current_section;
-
-#endif /* TE_PE */
-
#ifdef OBJ_ELF
symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE" */
unsigned long *ppc_apuinfo_list;
fprintf (stream, _("\
-mpower9, -mpwr9 generate code for Power9 architecture\n"));
fprintf (stream, _("\
+-mpower10, -mpwr10 generate code for Power10 architecture\n"));
+ fprintf (stream, _("\
-mcell generate code for Cell Broadband Engine architecture\n"));
fprintf (stream, _("\
-mcom generate code for Power/PowerPC common instructions\n"));
ppc_target_format (void)
{
#ifdef OBJ_COFF
-#ifdef TE_PE
- return target_big_endian ? "pe-powerpc" : "pe-powerpcle";
-#elif TE_POWERMAC
+#if TE_POWERMAC
return "xcoff-powermac";
#else
# ifdef TE_AIX5
bfd_boolean bad_insn = FALSE;
if (ppc_hash != NULL)
- hash_die (ppc_hash);
+ htab_delete (ppc_hash);
if (ppc_macro_hash != NULL)
- hash_die (ppc_macro_hash);
+ htab_delete (ppc_macro_hash);
/* Insert the opcodes into a hash table. */
- ppc_hash = hash_new ();
+ ppc_hash = str_htab_create ();
if (ENABLE_CHECKING)
{
}
if ((ppc_cpu & op->flags) != 0
- && !(ppc_cpu & op->deprecated))
+ && !(ppc_cpu & op->deprecated)
+ && str_hash_insert (ppc_hash, op->name, op, 0) != NULL)
{
- const char *retval;
-
- retval = hash_insert (ppc_hash, op->name, (void *) op);
- if (retval != NULL)
- {
- as_bad (_("duplicate instruction %s"),
- op->name);
- bad_insn = TRUE;
- }
+ as_bad (_("duplicate %s"), op->name);
+ bad_insn = TRUE;
}
}
if ((ppc_cpu & PPC_OPCODE_ANY) != 0)
for (op = powerpc_opcodes; op < op_end; op++)
- hash_insert (ppc_hash, op->name, (void *) op);
+ str_hash_insert (ppc_hash, op->name, op, 0);
op_end = prefix_opcodes + prefix_num_opcodes;
for (op = prefix_opcodes; op < op_end; op++)
}
if ((ppc_cpu & op->flags) != 0
- && !(ppc_cpu & op->deprecated))
+ && !(ppc_cpu & op->deprecated)
+ && str_hash_insert (ppc_hash, op->name, op, 0) != NULL)
{
- const char *retval;
-
- retval = hash_insert (ppc_hash, op->name, (void *) op);
- if (retval != NULL)
- {
- as_bad (_("duplicate instruction %s"),
- op->name);
- bad_insn = TRUE;
- }
+ as_bad (_("duplicate %s"), op->name);
+ bad_insn = TRUE;
}
}
if ((ppc_cpu & PPC_OPCODE_ANY) != 0)
for (op = prefix_opcodes; op < op_end; op++)
- hash_insert (ppc_hash, op->name, (void *) op);
+ str_hash_insert (ppc_hash, op->name, op, 0);
op_end = vle_opcodes + vle_num_opcodes;
for (op = vle_opcodes; op < op_end; op++)
}
if ((ppc_cpu & op->flags) != 0
- && !(ppc_cpu & op->deprecated))
+ && !(ppc_cpu & op->deprecated)
+ && str_hash_insert (ppc_hash, op->name, op, 0) != NULL)
{
- const char *retval;
-
- retval = hash_insert (ppc_hash, op->name, (void *) op);
- if (retval != NULL)
- {
- as_bad (_("duplicate instruction %s"),
- op->name);
- bad_insn = TRUE;
- }
+ as_bad (_("duplicate %s"), op->name);
+ bad_insn = TRUE;
}
}
bad_insn |= insn_validate (op);
}
- if ((ppc_cpu & op->flags) != 0 && !(ppc_cpu & op->deprecated))
+ if ((ppc_cpu & op->flags) != 0
+ && !(ppc_cpu & op->deprecated)
+ && str_hash_insert (ppc_hash, op->name, op, 0) != NULL)
{
- const char *retval;
-
- retval = hash_insert (ppc_hash, op->name, (void *) op);
- if (retval != NULL)
- {
- as_bad (_("duplicate instruction %s"),
- op->name);
- bad_insn = TRUE;
- }
+ as_bad (_("duplicate %s"), op->name);
+ bad_insn = TRUE;
}
}
for (op = spe2_opcodes; op < op_end; op++)
- hash_insert (ppc_hash, op->name, (void *) op);
+ str_hash_insert (ppc_hash, op->name, op, 0);
}
/* Insert the macros into a hash table. */
- ppc_macro_hash = hash_new ();
+ ppc_macro_hash = str_htab_create ();
macro_end = powerpc_macros + powerpc_num_macros;
for (macro = powerpc_macros; macro < macro_end; macro++)
- {
- if ((macro->flags & ppc_cpu) != 0 || (ppc_cpu & PPC_OPCODE_ANY) != 0)
- {
- const char *retval;
-
- retval = hash_insert (ppc_macro_hash, macro->name, (void *) macro);
- if (retval != (const char *) NULL)
- {
- as_bad (_("duplicate macro %s"), macro->name);
- bad_insn = TRUE;
- }
- }
- }
+ if (((macro->flags & ppc_cpu) != 0
+ || (ppc_cpu & PPC_OPCODE_ANY) != 0)
+ && str_hash_insert (ppc_macro_hash, macro->name, macro, 0) != NULL)
+ {
+ as_bad (_("duplicate %s"), macro->name);
+ bad_insn = TRUE;
+ }
if (bad_insn)
abort ();
ppc_data_csects = symbol_make ("dummy\001");
symbol_get_tc (ppc_data_csects)->within = ppc_data_csects;
#endif
-
-#ifdef TE_PE
-
- ppc_current_section = text_section;
- ppc_previous_section = 0;
-
-#endif
}
void
MAP64 ("got@pcrel", BFD_RELOC_PPC64_GOT_PCREL34),
MAP64 ("plt@pcrel", BFD_RELOC_PPC64_PLT_PCREL34),
MAP64 ("tls@pcrel", BFD_RELOC_PPC64_TLS_PCREL),
- MAP64 ("got@tlsgd@pcrel", BFD_RELOC_PPC64_GOT_TLSGD34),
- MAP64 ("got@tlsld@pcrel", BFD_RELOC_PPC64_GOT_TLSLD34),
- MAP64 ("got@tprel@pcrel", BFD_RELOC_PPC64_GOT_TPREL34),
- MAP64 ("got@dtprel@pcrel", BFD_RELOC_PPC64_GOT_DTPREL34),
+ MAP64 ("got@tlsgd@pcrel", BFD_RELOC_PPC64_GOT_TLSGD_PCREL34),
+ MAP64 ("got@tlsld@pcrel", BFD_RELOC_PPC64_GOT_TLSLD_PCREL34),
+ MAP64 ("got@tprel@pcrel", BFD_RELOC_PPC64_GOT_TPREL_PCREL34),
+ MAP64 ("got@dtprel@pcrel", BFD_RELOC_PPC64_GOT_DTPREL_PCREL34),
MAP64 ("higher34", BFD_RELOC_PPC64_ADDR16_HIGHER34),
MAP64 ("highera34", BFD_RELOC_PPC64_ADDR16_HIGHERA34),
MAP64 ("highest34", BFD_RELOC_PPC64_ADDR16_HIGHEST34),
if (ok)
{
bfdsym = symbol_get_bfdsym (sym);
- elfsym = elf_symbol_from (bfd_asymbol_bfd (bfdsym), bfdsym);
+ elfsym = elf_symbol_from (bfdsym);
gas_assert (elfsym);
elfsym->internal_elf_sym.st_other &= ~STO_PPC64_LOCAL_MASK;
elfsym->internal_elf_sym.st_other |= encoded;
}
#endif /* OBJ_ELF */
\f
-#ifdef TE_PE
-
-/*
- * Summary of parse_toc_entry.
- *
- * in: Input_line_pointer points to the '[' in one of:
- *
- * [toc] [tocv] [toc32] [toc64]
- *
- * Anything else is an error of one kind or another.
- *
- * out:
- * return value: success or failure
- * toc_kind: kind of toc reference
- * input_line_pointer:
- * success: first char after the ']'
- * failure: unchanged
- *
- * settings:
- *
- * [toc] - rv == success, toc_kind = default_toc
- * [tocv] - rv == success, toc_kind = data_in_toc
- * [toc32] - rv == success, toc_kind = must_be_32
- * [toc64] - rv == success, toc_kind = must_be_64
- *
- */
-
-enum toc_size_qualifier
-{
- default_toc, /* The toc cell constructed should be the system default size */
- data_in_toc, /* This is a direct reference to a toc cell */
- must_be_32, /* The toc cell constructed must be 32 bits wide */
- must_be_64 /* The toc cell constructed must be 64 bits wide */
-};
-
-static int
-parse_toc_entry (enum toc_size_qualifier *toc_kind)
-{
- char *start;
- char *toc_spec;
- char c;
- enum toc_size_qualifier t;
-
- /* Save the input_line_pointer. */
- start = input_line_pointer;
-
- /* Skip over the '[' , and whitespace. */
- ++input_line_pointer;
- SKIP_WHITESPACE ();
-
- /* Find the spelling of the operand. */
- c = get_symbol_name (&toc_spec);
-
- if (strcmp (toc_spec, "toc") == 0)
- {
- t = default_toc;
- }
- else if (strcmp (toc_spec, "tocv") == 0)
- {
- t = data_in_toc;
- }
- else if (strcmp (toc_spec, "toc32") == 0)
- {
- t = must_be_32;
- }
- else if (strcmp (toc_spec, "toc64") == 0)
- {
- t = must_be_64;
- }
- else
- {
- as_bad (_("syntax error: invalid toc specifier `%s'"), toc_spec);
- *input_line_pointer = c;
- input_line_pointer = start;
- return 0;
- }
-
- /* Now find the ']'. */
- *input_line_pointer = c;
-
- SKIP_WHITESPACE_AFTER_NAME (); /* leading whitespace could be there. */
- c = *input_line_pointer++; /* input_line_pointer->past char in c. */
-
- if (c != ']')
- {
- as_bad (_("syntax error: expected `]', found `%c'"), c);
- input_line_pointer = start;
- return 0;
- }
-
- *toc_kind = t;
- return 1;
-}
-#endif
-
#if defined (OBJ_XCOFF) || defined (OBJ_ELF)
/* See whether a symbol is in the TOC section. */
/* This switch statement must handle all BFD_RELOC values
possible in instruction fixups. As is, it handles all
BFD_RELOC values used in bfd/elf64-ppc.c, bfd/elf32-ppc.c,
- bfd/coff-ppc, bfd/coff-rs6000.c and bfd/coff64-rs6000.c.
+ bfd/coff-rs6000.c and bfd/coff64-rs6000.c.
Overkill since data and marker relocs need not be handled
here, but this way we can be sure a needed fixup reloc isn't
accidentally omitted. */
pcrel = TRUE;
break;
- case BFD_RELOC_16_GOT_PCREL: /* coff reloc, bad name re size. */
case BFD_RELOC_32:
- case BFD_RELOC_32_GOTOFF:
case BFD_RELOC_32_PLTOFF:
#ifdef OBJ_XCOFF
case BFD_RELOC_CTOR:
case BFD_RELOC_64_PCREL:
case BFD_RELOC_64_PLT_PCREL:
case BFD_RELOC_PPC64_GOT_PCREL34:
- case BFD_RELOC_PPC64_GOT_TLSGD34:
- case BFD_RELOC_PPC64_GOT_TLSLD34:
- case BFD_RELOC_PPC64_GOT_TPREL34:
- case BFD_RELOC_PPC64_GOT_DTPREL34:
+ case BFD_RELOC_PPC64_GOT_TLSGD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TLSLD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TPREL_PCREL34:
+ case BFD_RELOC_PPC64_GOT_DTPREL_PCREL34:
case BFD_RELOC_PPC64_PCREL28:
case BFD_RELOC_PPC64_PCREL34:
case BFD_RELOC_PPC64_PLT_PCREL34:
*s++ = '\0';
/* Look up the opcode in the hash table. */
- opcode = (const struct powerpc_opcode *) hash_find (ppc_hash, str);
+ opcode = (const struct powerpc_opcode *) str_hash_find (ppc_hash, str);
if (opcode == (const struct powerpc_opcode *) NULL)
{
const struct powerpc_macro *macro;
- macro = (const struct powerpc_macro *) hash_find (ppc_macro_hash, str);
+ macro = (const struct powerpc_macro *) str_hash_find (ppc_macro_hash,
+ str);
if (macro == (const struct powerpc_macro *) NULL)
as_bad (_("unrecognized opcode: `%s'"), str);
else
}
insn = opcode->opcode;
+ if (!target_big_endian
+ && ((insn & ~(1 << 26)) == 46u << 26
+ || (insn & ~(0xc0 << 1)) == (31u << 26 | 533 << 1)))
+ {
+ /* lmw, stmw, lswi, lswx, stswi, stswx */
+ as_bad (_("`%s' invalid when little-endian"), str);
+ ppc_clear_labels ();
+ return;
+ }
str = s;
while (ISSPACE (*str))
hold = input_line_pointer;
input_line_pointer = str;
-#ifdef TE_PE
- if (*input_line_pointer == '[')
+ if ((reg_names_p
+ && (((operand->flags & PPC_OPERAND_CR_BIT) != 0)
+ || ((operand->flags & PPC_OPERAND_CR_REG) != 0)))
+ || !register_name (&ex))
{
- /* We are expecting something like the second argument here:
- *
- * lwz r4,[toc].GS.0.static_int(rtoc)
- * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
- * The argument following the `]' must be a symbol name, and the
- * register must be the toc register: 'rtoc' or '2'
- *
- * The effect is to 0 as the displacement field
- * in the instruction, and issue an IMAGE_REL_PPC_TOCREL16 (or
- * the appropriate variation) reloc against it based on the symbol.
- * The linker will build the toc, and insert the resolved toc offset.
- *
- * Note:
- * o The size of the toc entry is currently assumed to be
- * 32 bits. This should not be assumed to be a hard coded
- * number.
- * o In an effort to cope with a change from 32 to 64 bits,
- * there are also toc entries that are specified to be
- * either 32 or 64 bits:
- * lwz r4,[toc32].GS.0.static_int(rtoc)
- * lwz r4,[toc64].GS.0.static_int(rtoc)
- * These demand toc entries of the specified size, and the
- * instruction probably requires it.
- */
-
- int valid_toc;
- enum toc_size_qualifier toc_kind;
- bfd_reloc_code_real_type toc_reloc;
-
- /* Go parse off the [tocXX] part. */
- valid_toc = parse_toc_entry (&toc_kind);
-
- if (!valid_toc)
- {
- ignore_rest_of_line ();
- break;
- }
+ char save_lex = lex_type['%'];
- /* Now get the symbol following the ']'. */
- expression (&ex);
-
- switch (toc_kind)
+ if (((operand->flags & PPC_OPERAND_CR_REG) != 0)
+ || (operand->flags & PPC_OPERAND_CR_BIT) != 0)
{
- case default_toc:
- /* In this case, we may not have seen the symbol yet,
- since it is allowed to appear on a .extern or .globl
- or just be a label in the .data section. */
- toc_reloc = BFD_RELOC_PPC_TOC16;
- break;
- case data_in_toc:
- /* 1. The symbol must be defined and either in the toc
- section, or a global.
- 2. The reloc generated must have the TOCDEFN flag set
- in upper bit mess of the reloc type.
- FIXME: It's a little confusing what the tocv
- qualifier can be used for. At the very least, I've
- seen three uses, only one of which I'm sure I can
- explain. */
- if (ex.X_op == O_symbol)
- {
- gas_assert (ex.X_add_symbol != NULL);
- if (symbol_get_bfdsym (ex.X_add_symbol)->section
- != tocdata_section)
- {
- as_bad (_("[tocv] symbol is not a toc symbol"));
- }
- }
-
- toc_reloc = BFD_RELOC_PPC_TOC16;
- break;
- case must_be_32:
- /* FIXME: these next two specifically specify 32/64 bit
- toc entries. We don't support them today. Is this
- the right way to say that? */
- toc_reloc = BFD_RELOC_NONE;
- as_bad (_("unimplemented toc32 expression modifier"));
- break;
- case must_be_64:
- /* FIXME: see above. */
- toc_reloc = BFD_RELOC_NONE;
- as_bad (_("unimplemented toc64 expression modifier"));
- break;
- default:
- fprintf (stderr,
- _("Unexpected return value [%d] from parse_toc_entry!\n"),
- toc_kind);
- abort ();
- break;
- }
-
- /* We need to generate a fixup for this expression. */
- if (fc >= MAX_INSN_FIXUPS)
- as_fatal (_("too many fixups"));
-
- fixups[fc].reloc = toc_reloc;
- fixups[fc].exp = ex;
- fixups[fc].opindex = *opindex_ptr;
- ++fc;
-
- /* Ok. We've set up the fixup for the instruction. Now make it
- look like the constant 0 was found here. */
- ex.X_unsigned = 1;
- ex.X_op = O_constant;
- ex.X_add_number = 0;
- ex.X_add_symbol = NULL;
- ex.X_op_symbol = NULL;
- }
-
- else
-#endif /* TE_PE */
- {
- if ((reg_names_p
- && (((operand->flags & PPC_OPERAND_CR_BIT) != 0)
- || ((operand->flags & PPC_OPERAND_CR_REG) != 0)))
- || !register_name (&ex))
- {
- char save_lex = lex_type['%'];
-
- if (((operand->flags & PPC_OPERAND_CR_REG) != 0)
- || (operand->flags & PPC_OPERAND_CR_BIT) != 0)
- {
- cr_operand = TRUE;
- lex_type['%'] |= LEX_BEGIN_NAME;
- }
- expression (&ex);
- cr_operand = FALSE;
- lex_type['%'] = save_lex;
+ cr_operand = TRUE;
+ lex_type['%'] |= LEX_BEGIN_NAME;
}
+ expression (&ex);
+ cr_operand = FALSE;
+ lex_type['%'] = save_lex;
}
str = input_line_pointer;
& ~operand->flags
& (PPC_OPERAND_GPR | PPC_OPERAND_FPR | PPC_OPERAND_VR
| PPC_OPERAND_VSR | PPC_OPERAND_CR_BIT | PPC_OPERAND_CR_REG
- | PPC_OPERAND_SPR | PPC_OPERAND_GQR)) != 0
+ | PPC_OPERAND_SPR | PPC_OPERAND_GQR | PPC_OPERAND_ACC)) != 0
&& !((ex.X_md & PPC_OPERAND_GPR) != 0
&& ex.X_add_number != 0
&& (operand->flags & PPC_OPERAND_GPR_0) != 0))
/* Fall through. */
case BFD_RELOC_PPC64_GOT_PCREL34:
case BFD_RELOC_PPC64_PLT_PCREL34:
- case BFD_RELOC_PPC64_GOT_TLSGD34:
- case BFD_RELOC_PPC64_GOT_TLSLD34:
- case BFD_RELOC_PPC64_GOT_TPREL34:
- case BFD_RELOC_PPC64_GOT_DTPREL34:
+ case BFD_RELOC_PPC64_GOT_TLSGD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TLSLD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TPREL_PCREL34:
+ case BFD_RELOC_PPC64_GOT_DTPREL_PCREL34:
if (operand->bitm != 0x3ffffffffULL
|| (operand->flags & PPC_OPERAND_NEGATIVE) != 0)
as_warn (_("%s unsupported on this instruction"), "@pcrel");
insn_length = 4;
if ((ppc_cpu & PPC_OPCODE_VLE) != 0 && PPC_OP_SE_VLE (insn))
insn_length = 2;
- else if ((opcode->flags & PPC_OPCODE_POWERXX) != 0
+ else if ((opcode->flags & PPC_OPCODE_POWER10) != 0
&& PPC_PREFIX_P (insn))
{
struct insn_label_list *l;
/* The prefix part of an 8-byte instruction always occupies the lower
addressed word in a doubleword, regardless of endianness. */
- if (!target_big_endian && insn_length == 8)
+ if (insn_length == 8
+ && (sizeof (insn) > sizeof (valueT) || !target_big_endian))
{
md_number_to_chars (f, PPC_GET_PREFIX (insn), 4);
md_number_to_chars (f + 4, PPC_GET_SUFFIX (insn), 4);
{
/* The fifth argument is the function size. */
++input_line_pointer;
- symbol_get_tc (ext_sym)->u.size = symbol_new
- ("L0\001", absolute_section,(valueT) 0, &zero_address_frag);
+ symbol_get_tc (ext_sym)->u.size
+ = symbol_new ("L0\001", absolute_section,
+ &zero_address_frag, 0);
pseudo_set (symbol_get_tc (ext_sym)->u.size);
}
}
}
#endif /* defined (OBJ_XCOFF) || defined (OBJ_ELF) */
\f
-#ifdef TE_PE
-
-/* Pseudo-ops specific to the Windows NT PowerPC PE (coff) format. */
-
-/* Set the current section. */
-static void
-ppc_set_current_section (segT new)
-{
- ppc_previous_section = ppc_current_section;
- ppc_current_section = new;
-}
-
-/* pseudo-op: .previous
- behaviour: toggles the current section with the previous section.
- errors: None
- warnings: "No previous section" */
-
-static void
-ppc_previous (int ignore ATTRIBUTE_UNUSED)
-{
- if (ppc_previous_section == NULL)
- {
- as_warn (_("no previous section to return to, ignored."));
- return;
- }
-
- subseg_set (ppc_previous_section, 0);
-
- ppc_set_current_section (ppc_previous_section);
-}
-
-/* pseudo-op: .pdata
- behaviour: predefined read only data section
- double word aligned
- errors: None
- warnings: None
- initial: .section .pdata "adr3"
- a - don't know -- maybe a misprint
- d - initialized data
- r - readable
- 3 - double word aligned (that would be 4 byte boundary)
-
- commentary:
- Tag index tables (also known as the function table) for exception
- handling, debugging, etc. */
-
-static void
-ppc_pdata (int ignore ATTRIBUTE_UNUSED)
-{
- if (pdata_section == 0)
- {
- pdata_section = subseg_new (".pdata", 0);
-
- bfd_set_section_flags (pdata_section, (SEC_ALLOC | SEC_LOAD | SEC_RELOC
- | SEC_READONLY | SEC_DATA));
-
- bfd_set_section_alignment (pdata_section, 2);
- }
- else
- {
- pdata_section = subseg_new (".pdata", 0);
- }
- ppc_set_current_section (pdata_section);
-}
-
-/* pseudo-op: .ydata
- behaviour: predefined read only data section
- double word aligned
- errors: None
- warnings: None
- initial: .section .ydata "drw3"
- a - don't know -- maybe a misprint
- d - initialized data
- r - readable
- 3 - double word aligned (that would be 4 byte boundary)
- commentary:
- Tag tables (also known as the scope table) for exception handling,
- debugging, etc. */
-
-static void
-ppc_ydata (int ignore ATTRIBUTE_UNUSED)
-{
- if (ydata_section == 0)
- {
- ydata_section = subseg_new (".ydata", 0);
- bfd_set_section_flags (ydata_section, (SEC_ALLOC | SEC_LOAD | SEC_RELOC
- | SEC_READONLY | SEC_DATA ));
-
- bfd_set_section_alignment (ydata_section, 3);
- }
- else
- {
- ydata_section = subseg_new (".ydata", 0);
- }
- ppc_set_current_section (ydata_section);
-}
-
-/* pseudo-op: .reldata
- behaviour: predefined read write data section
- double word aligned (4-byte)
- FIXME: relocation is applied to it
- FIXME: what's the difference between this and .data?
- errors: None
- warnings: None
- initial: .section .reldata "drw3"
- d - initialized data
- r - readable
- w - writable
- 3 - double word aligned (that would be 8 byte boundary)
-
- commentary:
- Like .data, but intended to hold data subject to relocation, such as
- function descriptors, etc. */
-
-static void
-ppc_reldata (int ignore ATTRIBUTE_UNUSED)
-{
- if (reldata_section == 0)
- {
- reldata_section = subseg_new (".reldata", 0);
-
- bfd_set_section_flags (reldata_section, (SEC_ALLOC | SEC_LOAD | SEC_RELOC
- | SEC_DATA));
-
- bfd_set_section_alignment (reldata_section, 2);
- }
- else
- {
- reldata_section = subseg_new (".reldata", 0);
- }
- ppc_set_current_section (reldata_section);
-}
-
-/* pseudo-op: .rdata
- behaviour: predefined read only data section
- double word aligned
- errors: None
- warnings: None
- initial: .section .rdata "dr3"
- d - initialized data
- r - readable
- 3 - double word aligned (that would be 4 byte boundary) */
-
-static void
-ppc_rdata (int ignore ATTRIBUTE_UNUSED)
-{
- if (rdata_section == 0)
- {
- rdata_section = subseg_new (".rdata", 0);
- bfd_set_section_flags (rdata_section, (SEC_ALLOC | SEC_LOAD | SEC_RELOC
- | SEC_READONLY | SEC_DATA ));
-
- bfd_set_section_alignment (rdata_section, 2);
- }
- else
- {
- rdata_section = subseg_new (".rdata", 0);
- }
- ppc_set_current_section (rdata_section);
-}
-
-/* pseudo-op: .ualong
- behaviour: much like .int, with the exception that no alignment is
- performed.
- FIXME: test the alignment statement
- errors: None
- warnings: None */
-
-static void
-ppc_ualong (int ignore ATTRIBUTE_UNUSED)
-{
- /* Try for long. */
- cons (4);
-}
-
-/* pseudo-op: .znop <symbol name>
- behaviour: Issue a nop instruction
- Issue a IMAGE_REL_PPC_IFGLUE relocation against it, using
- the supplied symbol name.
- errors: None
- warnings: Missing symbol name */
-
-static void
-ppc_znop (int ignore ATTRIBUTE_UNUSED)
-{
- unsigned long insn;
- const struct powerpc_opcode *opcode;
- char *f;
- symbolS *sym;
- char *symbol_name;
- char c;
- char *name;
-
- /* Strip out the symbol name. */
- c = get_symbol_name (&symbol_name);
-
- name = xstrdup (symbol_name);
-
- sym = symbol_find_or_make (name);
-
- *input_line_pointer = c;
-
- SKIP_WHITESPACE_AFTER_NAME ();
-
- /* Look up the opcode in the hash table. */
- opcode = (const struct powerpc_opcode *) hash_find (ppc_hash, "nop");
-
- /* Stick in the nop. */
- insn = opcode->opcode;
-
- /* Write out the instruction. */
- f = frag_more (4);
- md_number_to_chars (f, insn, 4);
- fix_new (frag_now,
- f - frag_now->fr_literal,
- 4,
- sym,
- 0,
- 0,
- BFD_RELOC_16_GOT_PCREL);
-
-}
-
-/* pseudo-op:
- behaviour:
- errors:
- warnings: */
-
-static void
-ppc_pe_comm (int lcomm)
-{
- char *name;
- char c;
- char *p;
- offsetT temp;
- symbolS *symbolP;
- offsetT align;
-
- c = get_symbol_name (&name);
-
- /* just after name is now '\0'. */
- p = input_line_pointer;
- *p = c;
- SKIP_WHITESPACE_AFTER_NAME ();
- if (*input_line_pointer != ',')
- {
- as_bad (_("expected comma after symbol-name: rest of line ignored."));
- ignore_rest_of_line ();
- return;
- }
-
- input_line_pointer++; /* skip ',' */
- if ((temp = get_absolute_expression ()) < 0)
- {
- as_warn (_(".COMMon length (%ld.) <0! Ignored."), (long) temp);
- ignore_rest_of_line ();
- return;
- }
-
- if (! lcomm)
- {
- /* The third argument to .comm is the alignment. */
- if (*input_line_pointer != ',')
- align = 3;
- else
- {
- ++input_line_pointer;
- align = get_absolute_expression ();
- if (align <= 0)
- {
- as_warn (_("ignoring bad alignment"));
- align = 3;
- }
- }
- }
-
- *p = 0;
- symbolP = symbol_find_or_make (name);
-
- *p = c;
- if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP))
- {
- as_bad (_("ignoring attempt to re-define symbol `%s'."),
- S_GET_NAME (symbolP));
- ignore_rest_of_line ();
- return;
- }
-
- if (S_GET_VALUE (symbolP))
- {
- if (S_GET_VALUE (symbolP) != (valueT) temp)
- as_bad (_("length of .comm \"%s\" is already %ld. Not changed to %ld."),
- S_GET_NAME (symbolP),
- (long) S_GET_VALUE (symbolP),
- (long) temp);
- }
- else
- {
- S_SET_VALUE (symbolP, (valueT) temp);
- S_SET_EXTERNAL (symbolP);
- S_SET_SEGMENT (symbolP, bfd_com_section_ptr);
- }
-
- demand_empty_rest_of_line ();
-}
-
-/*
- * implement the .section pseudo op:
- * .section name {, "flags"}
- * ^ ^
- * | +--- optional flags: 'b' for bss
- * | 'i' for info
- * +-- section name 'l' for lib
- * 'n' for noload
- * 'o' for over
- * 'w' for data
- * 'd' (apparently m88k for data)
- * 'x' for text
- * But if the argument is not a quoted string, treat it as a
- * subsegment number.
- *
- * FIXME: this is a copy of the section processing from obj-coff.c, with
- * additions/changes for the moto-pas assembler support. There are three
- * categories:
- *
- * FIXME: I just noticed this. This doesn't work at all really. It it
- * setting bits that bfd probably neither understands or uses. The
- * correct approach (?) will have to incorporate extra fields attached
- * to the section to hold the system specific stuff. (krk)
- *
- * Section Contents:
- * 'a' - unknown - referred to in documentation, but no definition supplied
- * 'c' - section has code
- * 'd' - section has initialized data
- * 'u' - section has uninitialized data
- * 'i' - section contains directives (info)
- * 'n' - section can be discarded
- * 'R' - remove section at link time
- *
- * Section Protection:
- * 'r' - section is readable
- * 'w' - section is writable
- * 'x' - section is executable
- * 's' - section is sharable
- *
- * Section Alignment:
- * '0' - align to byte boundary
- * '1' - align to halfword boundary
- * '2' - align to word boundary
- * '3' - align to doubleword boundary
- * '4' - align to quadword boundary
- * '5' - align to 32 byte boundary
- * '6' - align to 64 byte boundary
- *
- */
-
-void
-ppc_pe_section (int ignore ATTRIBUTE_UNUSED)
-{
- /* Strip out the section name. */
- char *section_name;
- char c;
- char *name;
- unsigned int exp;
- flagword flags;
- segT sec;
- int align;
-
- c = get_symbol_name (§ion_name);
-
- name = xstrdup (section_name);
-
- *input_line_pointer = c;
-
- SKIP_WHITESPACE_AFTER_NAME ();
-
- exp = 0;
- flags = SEC_NO_FLAGS;
-
- if (strcmp (name, ".idata$2") == 0)
- {
- align = 0;
- }
- else if (strcmp (name, ".idata$3") == 0)
- {
- align = 0;
- }
- else if (strcmp (name, ".idata$4") == 0)
- {
- align = 2;
- }
- else if (strcmp (name, ".idata$5") == 0)
- {
- align = 2;
- }
- else if (strcmp (name, ".idata$6") == 0)
- {
- align = 1;
- }
- else
- /* Default alignment to 16 byte boundary. */
- align = 4;
-
- if (*input_line_pointer == ',')
- {
- ++input_line_pointer;
- SKIP_WHITESPACE ();
- if (*input_line_pointer != '"')
- exp = get_absolute_expression ();
- else
- {
- ++input_line_pointer;
- while (*input_line_pointer != '"'
- && ! is_end_of_line[(unsigned char) *input_line_pointer])
- {
- switch (*input_line_pointer)
- {
- /* Section Contents */
- case 'a': /* unknown */
- as_bad (_("unsupported section attribute -- 'a'"));
- break;
- case 'c': /* code section */
- flags |= SEC_CODE;
- break;
- case 'd': /* section has initialized data */
- flags |= SEC_DATA;
- break;
- case 'u': /* section has uninitialized data */
- /* FIXME: This is IMAGE_SCN_CNT_UNINITIALIZED_DATA
- in winnt.h */
- flags |= SEC_ROM;
- break;
- case 'i': /* section contains directives (info) */
- /* FIXME: This is IMAGE_SCN_LNK_INFO
- in winnt.h */
- flags |= SEC_HAS_CONTENTS;
- break;
- case 'n': /* section can be discarded */
- flags &=~ SEC_LOAD;
- break;
- case 'R': /* Remove section at link time */
- flags |= SEC_NEVER_LOAD;
- break;
-#if IFLICT_BRAIN_DAMAGE
- /* Section Protection */
- case 'r': /* section is readable */
- flags |= IMAGE_SCN_MEM_READ;
- break;
- case 'w': /* section is writable */
- flags |= IMAGE_SCN_MEM_WRITE;
- break;
- case 'x': /* section is executable */
- flags |= IMAGE_SCN_MEM_EXECUTE;
- break;
- case 's': /* section is sharable */
- flags |= IMAGE_SCN_MEM_SHARED;
- break;
-
- /* Section Alignment */
- case '0': /* align to byte boundary */
- flags |= IMAGE_SCN_ALIGN_1BYTES;
- align = 0;
- break;
- case '1': /* align to halfword boundary */
- flags |= IMAGE_SCN_ALIGN_2BYTES;
- align = 1;
- break;
- case '2': /* align to word boundary */
- flags |= IMAGE_SCN_ALIGN_4BYTES;
- align = 2;
- break;
- case '3': /* align to doubleword boundary */
- flags |= IMAGE_SCN_ALIGN_8BYTES;
- align = 3;
- break;
- case '4': /* align to quadword boundary */
- flags |= IMAGE_SCN_ALIGN_16BYTES;
- align = 4;
- break;
- case '5': /* align to 32 byte boundary */
- flags |= IMAGE_SCN_ALIGN_32BYTES;
- align = 5;
- break;
- case '6': /* align to 64 byte boundary */
- flags |= IMAGE_SCN_ALIGN_64BYTES;
- align = 6;
- break;
-#endif
- default:
- as_bad (_("unknown section attribute '%c'"),
- *input_line_pointer);
- break;
- }
- ++input_line_pointer;
- }
- if (*input_line_pointer == '"')
- ++input_line_pointer;
- }
- }
-
- sec = subseg_new (name, (subsegT) exp);
-
- ppc_set_current_section (sec);
-
- if (flags != SEC_NO_FLAGS)
- {
- if (!bfd_set_section_flags (sec, flags))
- as_bad (_("error setting flags for \"%s\": %s"),
- bfd_section_name (sec),
- bfd_errmsg (bfd_get_error ()));
- }
-
- bfd_set_section_alignment (sec, align);
-}
-
-static void
-ppc_pe_function (int ignore ATTRIBUTE_UNUSED)
-{
- char *name;
- char endc;
- symbolS *ext_sym;
-
- endc = get_symbol_name (&name);
-
- ext_sym = symbol_find_or_make (name);
-
- (void) restore_line_pointer (endc);
-
- S_SET_DATA_TYPE (ext_sym, DT_FCN << N_BTSHFT);
- SF_SET_FUNCTION (ext_sym);
- SF_SET_PROCESS (ext_sym);
- coff_add_linesym (ext_sym);
-
- demand_empty_rest_of_line ();
-}
-
-static void
-ppc_pe_tocd (int ignore ATTRIBUTE_UNUSED)
-{
- if (tocdata_section == 0)
- {
- tocdata_section = subseg_new (".tocd", 0);
- /* FIXME: section flags won't work. */
- bfd_set_section_flags (tocdata_section, (SEC_ALLOC | SEC_LOAD | SEC_RELOC
- | SEC_READONLY | SEC_DATA));
-
- bfd_set_section_alignment (tocdata_section, 2);
- }
- else
- {
- rdata_section = subseg_new (".tocd", 0);
- }
-
- ppc_set_current_section (tocdata_section);
-
- demand_empty_rest_of_line ();
-}
-
-/* Don't adjust TOC relocs to use the section symbol. */
-
-int
-ppc_pe_fix_adjustable (fixS *fix)
-{
- return fix->fx_r_type != BFD_RELOC_PPC_TOC16;
-}
-
-#endif
-\f
#ifdef OBJ_XCOFF
/* XCOFF specific symbol and file handling. */
continue;
csect = symbol_create (".abs[XO]", absolute_section,
- S_GET_VALUE (sym), &zero_address_frag);
+ &zero_address_frag, S_GET_VALUE (sym));
symbol_get_bfdsym (csect)->value = S_GET_VALUE (sym);
S_SET_STORAGE_CLASS (csect, C_HIDEXT);
i = S_GET_NUMBER_AUXILIARY (csect);
if (fix->fx_addsy)
{
asymbol *bfdsym = symbol_get_bfdsym (fix->fx_addsy);
- elf_symbol_type *elfsym
- = elf_symbol_from (bfd_asymbol_bfd (bfdsym), bfdsym);
+ elf_symbol_type *elfsym = elf_symbol_from (bfdsym);
gas_assert (elfsym);
if ((STO_PPC64_LOCAL_MASK & elfsym->internal_elf_sym.st_other) != 0)
return 1;
if (fix->fx_addsy)
{
asymbol *bfdsym = symbol_get_bfdsym (fix->fx_addsy);
- elf_symbol_type *elfsym
- = elf_symbol_from (bfd_asymbol_bfd (bfdsym), bfdsym);
+ elf_symbol_type *elfsym = elf_symbol_from (bfdsym);
gas_assert (elfsym);
if ((STO_PPC64_LOCAL_MASK & elfsym->internal_elf_sym.st_other) != 0)
return 0;
&& fix->fx_r_type != BFD_RELOC_HI16_S_GOTOFF
&& fix->fx_r_type != BFD_RELOC_PPC64_GOT16_DS
&& fix->fx_r_type != BFD_RELOC_PPC64_GOT16_LO_DS
- && fix->fx_r_type != BFD_RELOC_16_GOT_PCREL
- && fix->fx_r_type != BFD_RELOC_32_GOTOFF
&& fix->fx_r_type != BFD_RELOC_PPC64_GOT_PCREL34
&& fix->fx_r_type != BFD_RELOC_24_PLT_PCREL
&& fix->fx_r_type != BFD_RELOC_32_PLTOFF
case BFD_RELOC_PPC64_DTPREL16_HIGHESTA:
case BFD_RELOC_PPC64_TPREL34:
case BFD_RELOC_PPC64_DTPREL34:
- case BFD_RELOC_PPC64_GOT_TLSGD34:
- case BFD_RELOC_PPC64_GOT_TLSLD34:
- case BFD_RELOC_PPC64_GOT_TPREL34:
- case BFD_RELOC_PPC64_GOT_DTPREL34:
+ case BFD_RELOC_PPC64_GOT_TLSGD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TLSLD_PCREL34:
+ case BFD_RELOC_PPC64_GOT_TPREL_PCREL34:
+ case BFD_RELOC_PPC64_GOT_DTPREL_PCREL34:
gas_assert (fixP->fx_addsy != NULL);
S_SET_THREAD_LOCAL (fixP->fx_addsy);
fieldval = 0;
fixP->fx_addnumber = 0;
else
{
-#ifdef TE_PE
- fixP->fx_addnumber = 0;
-#else
/* We want to use the offset within the toc, not the actual VMA
of the symbol. */
fixP->fx_addnumber = (- bfd_section_vma (S_GET_SEGMENT (fixP->fx_addsy))
- S_GET_VALUE (ppc_toc_csect));
/* Set *valP to avoid errors. */
*valP = value;
-#endif
}
#endif
}
projects / thirdparty / binutils-gdb.git / blobdiff