dnl
dnl
dnl v2.5 needed for --bindir et al
-AC_PREREQ(2.5)
+AC_PREREQ(2.13)
AC_INIT(as.h)
AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE(gas, 2.8.2)
+AM_INIT_AUTOMAKE(gas, 2.9.4)
AM_PROG_LIBTOOL
*) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
esac])dnl
+using_cgen=no
+
# Generate a header file
AM_CONFIG_HEADER(config.h:config.in)
te_file=generic
+# Makefile target for installing gas in $(tooldir)/bin.
+install_tooldir=install-exec-tooldir
+
canon_targets=""
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
alpha*) cpu_type=alpha ;;
armeb) cpu_type=arm endian=big ;;
arm*) cpu_type=arm endian=little ;;
+ strongarm*) cpu_type=arm endian=little ;;
thumb*) cpu_type=arm endian=little ;;
hppa*) cpu_type=hppa ;;
changequote(,)dnl
i[456]86) cpu_type=i386 ;;
m680[012346]0) cpu_type=m68k ;;
+changequote([,])dnl
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
-changequote([,])dnl
+ m5200) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
# start-sanitize-r5900
sparclite*) cpu_type=sparc arch=sparclite ;;
sparclet*) cpu_type=sparc arch=sparclet ;;
sparc64*) cpu_type=sparc arch=v9-64 ;;
+ sparc86x*) cpu_type=sparc arch=sparc86x ;;
sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
v850*) cpu_type=v850 ;;
*) cpu_type=${cpu} ;;
if test ${this_target} = $target ; then
target_cpu_type=${cpu_type}
- if test x${endian} = xbig; then
- AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 1)
- elif test x${endian} = xlittle; then
- AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 0)
- fi
elif test ${target_cpu_type} != ${cpu_type} ; then
continue
fi
alpha*-*-openbsd*) fmt=ecoff ;;
alpha*-*-osf*) fmt=ecoff ;;
alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux*) fmt=elf em=linux ;;
+ alpha*-*-linux-gnu*) fmt=elf em=linux ;;
+ alpha*-*-netbsd*) fmt=elf em=nbsd ;;
arc-*-elf*) fmt=elf bfd_gas=yes ;;
arm-*-riscix*) fmt=aout em=riscix ;;
arm-*-aout) fmt=aout ;;
arm-*-coff | thumb-*-coff) fmt=coff ;;
+ arm-*-elf | thumb-*-elf) fmt=elf ;;
+ arm-*-oabi | thumb-*-oabi) fmt=elf ;;
arm-*-riscix*) fmt=aout ;;
- arm-*-pe) fmt=coff em=pe ;;
+ arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
-# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-d30v
+
+# start-sanitize-sky
+ dvp-*-*) fmt=elf bfd_gas=yes install_tooldir= ;;
+# end-sanitize-sky
+
+ fr30-*-*) fmt=elf bfd_gas=yes ;;
hppa-*-*elf*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
hppa-*-osf*) fmt=som em=hppa ;;
hppa-*-rtems*) fmt=elf em=hppa ;;
hppa-*-hpux*) fmt=som em=hppa ;;
+ hppa-*-mpeix*) fmt=som em=hppa ;;
hppa-*-bsd*) fmt=som em=hppa ;;
hppa-*-hiux*) fmt=som em=hppa ;;
i386-ibm-aix*) fmt=coff em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
+dnl start-sanitize-beos
+ i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;;
+dnl end-sanitize-beos
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux*) fmt=elf em=linux ;;
+ i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
i386-*-lynxos*) fmt=coff em=lynx ;;
i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
- fmt=elf ;;
- i386-*-freebsdelf*) fmt=elf ;;
+ fmt=elf bfd_gas=yes ;;
+ i386-*-freebsdelf*) fmt=elf bfd_gas=yes ;;
i386-*-freebsd*) fmt=aout em=386bsd ;;
i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
fmt=coff ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
i386-*-pe) fmt=coff em=pe ;;
- i386-*-cygwin32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-cygwin*) fmt=coff em=pe bfd_gas=yes ;;
i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
i386-*-*nt*) fmt=coff em=pe ;;
i960-*-bout) fmt=bout ;;
fmt=coff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux*) fmt=elf em=linux ;;
+ m68k-*-linux-gnu*) fmt=elf em=linux ;;
+ m68k-*-gnu*) fmt=elf ;;
m68k-*-lynxos*) fmt=coff em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
# don't change em like *-*-bsd does
mips-dec-netbsd*) fmt=elf endian=little ;;
mips-dec-openbsd*) fmt=elf endian=little ;;
- mips-dec-bsd*) fmt=aout ;;
+ mips-dec-bsd*) fmt=aout endian=little ;;
mips-sony-bsd*) fmt=ecoff ;;
mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
mips-*-ultrix*) fmt=ecoff endian=little ;;
mips-*-lnews*) fmt=ecoff em=lnews ;;
mips-*-riscos*) fmt=ecoff ;;
mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
+ mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
fmt=elf ;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
- ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
+ ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*)
fmt=coff em=pe ;;
ppc-*-aix*) fmt=coff ;;
ppc-*-beos*) fmt=coff ;;
ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
fmt=elf ;;
- ppc-*-linux*) fmt=elf
+ ppc-*-linux-gnu*) fmt=elf
case "$endian" in
big) ;;
- *) AC_MSG_ERROR(Linux must be configured big endian) ;;
+ *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
esac
;;
ppc-*-solaris*) fmt=elf
sh-*-elf*) fmt=elf ;;
sh-*-coff*) fmt=coff ;;
- sh-*-rtems*) fmt=elf ;;
+ sh-*-rtems*) fmt=coff ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
fmt=aout em=sparcaout ;;
sparc-*-coff) fmt=coff ;;
sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux*) fmt=elf em=linux ;;
+ sparc-*-linux-gnu*) fmt=elf em=linux ;;
sparc-*-lynxos*) fmt=coff em=lynx ;;
sparc-fujitsu-none) fmt=aout ;;
sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
- sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- sparc-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ sparc-*-netbsd*) fmt=aout em=nbsd ;;
+ sparc-*-openbsd*) fmt=aout em=nbsd ;;
+
+ strongarm-*-coff) fmt=coff ;;
+ strongarm-*-elf) fmt=elf ;;
tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
tic80-*-*) fmt=coff ;;
# end-sanitize-tic80
-# start-sanitize-sky
- dvp-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-sky
-
v850-*-*) fmt=elf bfd_gas=yes ;;
-
-# start-sanitize-v850e
v850e-*-*) fmt=elf bfd_gas=yes ;;
v850ea-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-v850e
+
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
*-*-netware) fmt=elf ;;
esac
+ if test ${this_target} = $target ; then
+ if test x${endian} = xbig; then
+ AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 1)
+ elif test x${endian} = xlittle; then
+ AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 0)
+ fi
+ fi
+
case ${cpu_type}-${fmt} in
alpha*-*) bfd_gas=yes ;;
arm-*) bfd_gas=yes ;;
ns32k-*) bfd_gas=yes ;;
ppc-*) bfd_gas=yes ;;
sparc-*) bfd_gas=yes ;;
+ strongarm-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
# Other random stuff.
- # do we need the opcodes library?
+ # Do we need the opcodes library?
case ${cpu_type} in
vax | i386 | tic30)
;;
+
*)
need_opcodes=yes
;;
esac
+ # Any other special object files needed ?
case ${cpu_type} in
- m32r)
- case ${extra_objects} in
- *cgen.o*) ;;
- *) extra_objects="$extra_objects cgen.o"
- AC_DEFINE(USING_CGEN)
- ;;
- esac
+ fr30 | m32r)
+ using_cgen=yes
;;
m68k)
;;
esac
+ if test $using_cgen = yes ; then
+ case "x${extra_objects}" in
+ *cgen.o*) ;;
+ *) extra_objects="$extra_objects cgen.o" ;;
+ esac
+ fi
+
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips-*-linux*-*) case "$endian" in
+ mips-*-linux-gnu*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
"") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
esac
+# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
+cgen_cpu_prefix=""
+if test $using_cgen = yes ; then
+ case ${target_cpu} in
+ *) cgen_cpu_prefix=${target_cpu} ;;
+ esac
+ AC_SUBST(cgen_cpu_prefix)
+ AC_DEFINE(USING_CGEN)
+fi
+
dnl
dnl Make sure the desired support files exist.
dnl
AC_SUBST(target_cpu_type)
AC_SUBST(obj_format)
AC_SUBST(te_file)
+AC_SUBST(install_tooldir)
AC_SUBST(atof)
dnl AC_SUBST(emulation)
AC_PROG_CC
AC_PROG_YACC
-AC_PROG_LEX
-AC_DECL_YYTEXT
+AM_PROG_LEX
+
+ALL_LINGUAS=
+CY_GNU_GETTEXT
AM_MAINTAINER_MODE
-AM_CYGWIN32
-AM_EXEEXT
+AC_EXEEXT
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
dnl the old symlinks don't exist, so that a reconfigure in an existing
dnl directory behaves reasonably.
-AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in,
+AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in,
[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
echo '#include "te-'"${te_file}"'.h"' > targ-env.h
echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
- case ${target_cpu_type} in
- m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
- esac],
+ if test "x$cgen_cpu_prefix" != x ; then
+ echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
+ fi
+
+ sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile],
[target_cpu_type=${target_cpu_type}
+ cgen_cpu_prefix=${cgen_cpu_prefix}
obj_format=${obj_format}
te_file=${te_file}])
projects / thirdparty / binutils-gdb.git / blobdiff