-@c Copyright (C) 1996, 1998, 1999, 2000 Free Software Foundation, Inc.
+@c Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+@c Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
* ARM Floating Point:: Floating Point
* ARM Directives:: ARM Machine Directives
* ARM Opcodes:: Opcodes
+* ARM Mapping Symbols:: Mapping Symbols
@end menu
@node ARM Options
@table @code
-@cindex @code{-marm} command line option, ARM
-@item -marm@code{[2|250|3|6|60|600|610|620|7|7m|7d|7dm|7di|7dmi|70|700|700i|710|710c|7100|7500|7500fe|7tdmi|8|810|9|9tdmi|920|strongarm|strongarm110|strongarm1100]}
+@cindex @code{-mcpu=} command line option, ARM
+@item -mcpu=@var{processor}[+@var{extension}@dots{}]
This option specifies the target processor. The assembler will issue an
error message if an attempt is made to assemble an instruction which
-will not execute on the target processor.
-
-@cindex @code{-marmv} command line option, ARM
-@item -marmv@code{[2|2a|3|3m|4|4t|5|5t]}
+will not execute on the target processor. The following processor names are
+recognized:
+@code{arm1},
+@code{arm2},
+@code{arm250},
+@code{arm3},
+@code{arm6},
+@code{arm60},
+@code{arm600},
+@code{arm610},
+@code{arm620},
+@code{arm7},
+@code{arm7m},
+@code{arm7d},
+@code{arm7dm},
+@code{arm7di},
+@code{arm7dmi},
+@code{arm70},
+@code{arm700},
+@code{arm700i},
+@code{arm710},
+@code{arm710t},
+@code{arm720},
+@code{arm720t},
+@code{arm740t},
+@code{arm710c},
+@code{arm7100},
+@code{arm7500},
+@code{arm7500fe},
+@code{arm7t},
+@code{arm7tdmi},
+@code{arm7tdmi-s},
+@code{arm8},
+@code{arm810},
+@code{strongarm},
+@code{strongarm1},
+@code{strongarm110},
+@code{strongarm1100},
+@code{strongarm1110},
+@code{arm9},
+@code{arm920},
+@code{arm920t},
+@code{arm922t},
+@code{arm940t},
+@code{arm9tdmi},
+@code{arm9e},
+@code{arm926e},
+@code{arm926ej-s},
+@code{arm946e-r0},
+@code{arm946e},
+@code{arm946e-s},
+@code{arm966e-r0},
+@code{arm966e},
+@code{arm966e-s},
+@code{arm968e-s},
+@code{arm10t},
+@code{arm10tdmi},
+@code{arm10e},
+@code{arm1020},
+@code{arm1020t},
+@code{arm1020e},
+@code{arm1022e},
+@code{arm1026ej-s},
+@code{arm1136j-s},
+@code{arm1136jf-s},
+@code{arm1156t2-s},
+@code{arm1156t2f-s},
+@code{arm1176jz-s},
+@code{arm1176jzf-s},
+@code{mpcore},
+@code{mpcorenovfp},
+@code{ep9312} (ARM920 with Cirrus Maverick coprocessor),
+@code{i80200} (Intel XScale processor)
+@code{iwmmxt} (Intel(r) XScale processor with Wireless MMX(tm) technology coprocessor)
+and
+@code{xscale}.
+The special name @code{all} may be used to allow the
+assembler to accept instructions valid for any ARM processor.
+
+In addition to the basic instruction set, the assembler can be told to
+accept various extension mnemonics that extend the processor using the
+co-processor instruction space. For example, @code{-mcpu=arm920+maverick}
+is equivalent to specifying @code{-mcpu=ep9312}. The following extensions
+are currently supported:
+@code{+maverick}
+@code{+iwmmxt}
+and
+@code{+xscale}.
+
+@cindex @code{-march=} command line option, ARM
+@item -march=@var{architecture}[+@var{extension}@dots{}]
This option specifies the target architecture. The assembler will issue
an error message if an attempt is made to assemble an instruction which
-will not execute on the target architecture.
+will not execute on the target architecture. The following architecture
+names are recognized:
+@code{armv1},
+@code{armv2},
+@code{armv2a},
+@code{armv2s},
+@code{armv3},
+@code{armv3m},
+@code{armv4},
+@code{armv4xm},
+@code{armv4t},
+@code{armv4txm},
+@code{armv5},
+@code{armv5t},
+@code{armv5txm},
+@code{armv5te},
+@code{armv5texp},
+@code{armv6},
+@code{armv6j},
+@code{armv6k},
+@code{armv6z},
+@code{armv6zk},
+@code{iwmmxt}
+and
+@code{xscale}.
+If both @code{-mcpu} and
+@code{-march} are specified, the assembler will use
+the setting for @code{-mcpu}.
+
+The architecture option can be extended with the same instruction set
+extension options as the @code{-mcpu} option.
+
+@cindex @code{-mfpu=} command line option, ARM
+@item -mfpu=@var{floating-point-format}
+
+This option specifies the floating point format to assemble for. The
+assembler will issue an error message if an attempt is made to assemble
+an instruction which will not execute on the target floating point unit.
+The following format options are recognized:
+@code{softfpa},
+@code{fpe},
+@code{fpe2},
+@code{fpe3},
+@code{fpa},
+@code{fpa10},
+@code{fpa11},
+@code{arm7500fe},
+@code{softvfp},
+@code{softvfp+vfp},
+@code{vfp},
+@code{vfp10},
+@code{vfp10-r0},
+@code{vfp9},
+@code{vfpxd},
+@code{arm1020t},
+@code{arm1020e},
+@code{arm1136jf-s}
+and
+@code{maverick}.
+
+In addition to determining which instructions are assembled, this option
+also affects the way in which the @code{.double} assembler directive behaves
+when assembling little-endian code.
+
+The default is dependent on the processor selected. For Architecture 5 or
+later, the default is to assembler for VFP instructions; for earlier
+architectures the default is to assemble for FPA instructions.
@cindex @code{-mthumb} command line option, ARM
@item -mthumb
-This option specifies that only Thumb instructions should be assembled.
-
-@cindex @code{-mall} command line option, ARM
-@item -mall
-This option specifies that any Arm or Thumb instruction should be assembled.
-
-@cindex @code{-mfpa} command line option, ARM
-@item -mfpa @var{[10|11]}
-This option specifies the floating point architecture in use on the
-target processor.
-
-@cindex @code{-mfpe-old} command line option, ARM
-@item -mfpe-old
-Do not allow the assemble of floating point multiple instructions.
-
-@cindex @code{-mno-fpu} command line option, ARM
-@item -mno-fpu
-Do not allow the assembly of any floating point instructions.
+This option specifies that the assembler should start assembling Thumb
+instructions; that is, it should behave as though the file starts with a
+@code{.code 16} directive.
@cindex @code{-mthumb-interwork} command line option, ARM
@item -mthumb-interwork
be marked as supporting interworking.
@cindex @code{-mapcs} command line option, ARM
-@item -mapcs @var{[26|32]}
+@item -mapcs @code{[26|32]}
This option specifies that the output generated by the assembler should
be marked as supporting the indicated version of the Arm Procedure.
Calling Standard.
+@cindex @code{-matpcs} command line option, ARM
+@item -matpcs
+This option specifies that the output generated by the assembler should
+be marked as supporting the Arm/Thumb Procedure Calling Standard. If
+enabled this option will cause the assembler to create an empty
+debugging section in the object file called .arm.atpcs. Debuggers can
+use this to determine the ABI being used by.
+
@cindex @code{-mapcs-float} command line option, ARM
@item -mapcs-float
-This indicates the the floating point variant of the APCS should be
+This indicates the floating point variant of the APCS should be
used. In this variant floating point arguments are passed in FP
registers rather than integer registers.
This indicates that the reentrant variant of the APCS should be used.
This variant supports position independent code.
+@cindex @code{-mfloat-abi=} command line option, ARM
+@item -mfloat-abi=@var{abi}
+This option specifies that the output generated by the assembler should be
+marked as using specified floating point ABI.
+The following values are recognized:
+@code{soft},
+@code{softfp}
+and
+@code{hard}.
+
+@cindex @code{-eabi=} command line option, ARM
+@item -meabi=@var{ver}
+This option specifies which EABI version the produced object files should
+conform to.
+The following values are recognised:
+@code{gnu}
+and
+@code{4}.
+
@cindex @code{-EB} command line option, ARM
@item -EB
This option specifies that the output generated by the assembler should
@cindex @code{-k} command line option, ARM
@cindex PIC code generation for ARM
@item -k
-This option enables the generation of PIC (position independent code).
-
-@cindex @code{-moabi} command line option, ARM
-@item -moabi
-This indicates that the code should be assembled using the old ARM ELF
-conventions, based on a beta release release of the ARM-ELF
-specifications, rather than the default conventions which are based on
-the final release of the ARM-ELF specifications.
+This option specifies that the output of the assembler should be marked
+as position-independent code (PIC).
@end table
@cindex line separator, ARM
@cindex statement separator, ARM
@cindex ARM line separator
-On ARM systems running the GNU/Linux operating system, @samp{;} can be
-used instead of a newline to separate statements.
+The @samp{;} character can be used instead of a newline to separate
+statements.
@cindex immediate character, ARM
@cindex ARM immediate character
This is the generic @var{.align} directive. For the ARM however if the
first argument is zero (ie no alignment is needed) the assembler will
behave as if the argument had been 2 (ie pad to the next four byte
-boundary). This is for compatability with ARM's own assembler.
+boundary). This is for compatibility with ARM's own assembler.
@cindex @code{req} directive, ARM
@item @var{name} .req @var{register name}
foo .req r0
@end smallexample
+@cindex @code{unreq} directive, ARM
+@item .unreq @var{alias-name}
+This undefines a register alias which was previously defined using the
+@code{req} directive. For example:
+
+@smallexample
+ foo .req r0
+ .unreq foo
+@end smallexample
+
+An error occurs if the name is undefined. Note - this pseudo op can
+be used to delete builtin in register name aliases (eg 'r0'). This
+should only be done if it is really necessary.
+
@cindex @code{code} directive, ARM
-@item .code @var{[16|32]}
+@item .code @code{[16|32]}
This directive selects the instruction set being generated. The value 16
selects Thumb, with the value 32 selecting ARM.
This directive causes the current contents of the literal pool to be
dumped into the current section (which is assumed to be the .text
section) at the current location (aligned to a word boundary).
+@code{GAS} maintains a separate literal pool for each section and each
+sub-section. The @code{.ltorg} directive will only affect the literal
+pool of the current section and sub-section. At the end of assembly
+all remaining, un-empty literal pools will automatically be dumped.
+
+Note - older versions of @code{GAS} would dump the current literal
+pool any time a section change occurred. This is no longer done, since
+it prevents accurate control of the placement of literal pools.
@cindex @code{.pool} directive, ARM
@item .pool
This is a synonym for .ltorg.
+@cindex @code{.fnstart} directive, ARM
+@item .unwind_fnstart
+Marks the start of a function with an unwind table entry.
+
+@cindex @code{.fnend} directive, ARM
+@item .unwind_fnend
+Marks the end of a function with an unwind table entry. The unwind index
+table entry is created when this directive is processed.
+
+If no personality routine has been specified then standard personality
+routine 0 or 1 will be used, depending on the number of unwind opcodes
+required.
+
+@cindex @code{.cantunwind} directive, ARM
+@item .cantunwind
+Prevents unwinding through the current function. No personality routine
+or exception table data is required or permitted.
+
+@cindex @code{.personality} directive, ARM
+@item .personality @var{name}
+Sets the personality routine for the current function to @var{name}.
+
+@cindex @code{.personalityindex} directive, ARM
+@item .personalityindex @var{index}
+Sets the personality routine for the current function to the EABI standard
+routine number @var{index}
+
+@cindex @code{.handlerdata} directive, ARM
+@item .handlerdata
+Marks the end of the current function, and the start of the exception table
+entry for that function. Anything between this directive and the
+@code{.fnend} directive will be added to the exception table entry.
+
+Must be preceded by a @code{.personality} or @code{.personalityindex}
+directive.
+
+@cindex @code{.save} directive, ARM
+@item .save @var{reglist}
+Generate unwinder annotations to restore the registers in @var{reglist}.
+The format of @var{reglist} is the same as the corresponding store-multiple
+instruction.
+
+@smallexample
+@exdent @emph{core registers}
+ .save @{r4, r5, r6, lr@}
+ stmfd sp!, @{r4, r5, r6, lr@}
+@exdent @emph{FPA registers}
+ .save f4, 2
+ sfmfd f4, 2, [sp]!
+@exdent @emph{VFP registers}
+ .save @{d8, d9, d10@}
+ fstmdf sp!, @{d8, d9, d10@}
+@exdent @emph{iWMMXt registers}
+ .save @{wr10, wr11@}
+ wstrd wr11, [sp, #-8]!
+ wstrd wr10, [sp, #-8]!
+or
+ .save wr11
+ wstrd wr11, [sp, #-8]!
+ .save wr10
+ wstrd wr10, [sp, #-8]!
+@end smallexample
+
+@cindex @code{.pad} directive, ARM
+@item .pad #@var{count}
+Generate unwinder annotations for a stack adjustment of @var{count} bytes.
+A positive value indicates the function prologue allocated stack space by
+decrementing the stack pointer.
+
+@cindex @code{.movsp} directive, ARM
+@item .movsp @var{reg}
+Tell the unwinder that @var{reg} contains the current stack pointer.
+
+@cindex @code{.setfp} directive, ARM
+@item .setfp @var{fpreg}, @var{spreg} [, #@var{offset}]
+Make all unwinder annotations relaive to a frame pointer. Without this
+the unwinder will use offsets from the stack pointer.
+
+The syntax of this directive is the same as the @code{sub} or @code{mov}
+instruction used to set the frame pointer. @var{spreg} must be either
+@code{sp} or mentioned in a previous @code{.movsp} directive.
+
+@smallexample
+.movsp ip
+mov ip, sp
+@dots{}
+.setfp fp, ip, #4
+sub fp, ip, #4
+@end smallexample
+
+@cindex @code{.unwind_raw} directive, ARM
+@item .raw @var{offset}, @var{byte1}, @dots{}
+Insert one of more arbitary unwind opcode bytes, which are known to adjust
+the stack pointer by @var{offset} bytes.
+
+For example @code{.unwind_raw 4, 0xb1, 0x01} is equivalent to
+@code{.save @{r0@}}
+
+@cindex @code{.cpu} directive, ARM
+@item .cpu @var{name}
+Select the target processor. Valid values for @var{name} are the same as
+for the @option{-mcpu} commandline option.
+
+@cindex @code{.arch} directive, ARM
+@item .arch @var{name}
+Select the target architecture. Valid values for @var{name} are the same as
+for the @option{-march} commandline option.
+
+@cindex @code{.fpu} directive, ARM
+@item .fpu @var{name}
+Select the floating point unit to assemble for. Valid values for @var{name}
+are the same as for the @option{-mfpu} commandline option.
+
+@cindex @code{.eabi_attribute} directive, ARM
+@item .eabi_attribute @var{tag}, @var{value}
+Set the EABI object attribute number @var{tag} to @var{value}. The value
+is either a @code{number}, @code{"string"}, or @code{number, "string"}
+depending on the tag.
+
@end table
@node ARM Opcodes
@end smallexample
This instruction will load the address of @var{label} into the indicated
-register. The instruction will evaluate to one or two a PC relative ADD
+register. The instruction will evaluate to one or two PC relative ADD
or SUB instructions depending upon where the label is located. If a
second instruction is not needed a NOP instruction will be generated in
its place, so that this instruction is always 8 bytes long.
Software Development Toolkit Reference Manual}, Advanced RISC Machines
Ltd.
+@node ARM Mapping Symbols
+@section Mapping Symbols
+
+The ARM ELF specification requires that special symbols be inserted
+into object files to mark certain features:
+
+@table @code
+
+@cindex @code{$a}
+@item $a
+At the start of a region of code containing ARM instructions.
+
+@cindex @code{$t}
+@item $t
+At the start of a region of code containing THUMB instructions.
+
+@cindex @code{$d}
+@item $d
+At the start of a region of data.
+
+@end table
+
+The assembler will automatically insert these symbols for you - there
+is no need to code them yourself. Support for tagging symbols ($b,
+$f, $p and $m) which is also mentioned in the current ARM ELF
+specification is not implemented. This is because they have been
+dropped from the new EABI and so tools cannot rely upon their
+presence.
+
projects / thirdparty / binutils-gdb.git / blobdiff