-@c Copyright (C) 1991-2017 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2021 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@c man end
* i386-TBM:: AMD's Trailing Bit Manipulation Instructions
* i386-16bit:: Writing 16-bit Code
* i386-Arch:: Specifying an x86 CPU architecture
+* i386-ISA:: AMD64 ISA vs. Intel64 ISA
* i386-Bugs:: AT&T Syntax bugs
* i386-Notes:: Notes
@end menu
@code{bdver3},
@code{bdver4},
@code{znver1},
+@code{znver2},
+@code{znver3},
@code{btver1},
@code{btver2},
@code{generic32} and
@code{no287},
@code{no387},
@code{no687},
+@code{cmov},
+@code{nocmov},
+@code{fxsr},
+@code{nofxsr},
@code{mmx},
@code{nommx},
@code{sse},
@code{sse2},
@code{sse3},
+@code{sse4a},
@code{ssse3},
@code{sse4.1},
@code{sse4.2},
@code{nosse},
@code{nosse2},
@code{nosse3},
+@code{nosse4a},
@code{nossse3},
@code{nosse4.1},
@code{nosse4.2},
@code{clflushopt},
@code{se1},
@code{clwb},
+@code{movdiri},
+@code{movdir64b},
+@code{enqcmd},
+@code{serialize},
+@code{tsxldtrk},
+@code{kl},
+@code{nokl},
+@code{widekl},
+@code{nowidekl},
+@code{hreset},
@code{avx512f},
@code{avx512cd},
@code{avx512er},
@code{avx512_vbmi2},
@code{avx512_vnni},
@code{avx512_bitalg},
+@code{avx512_vp2intersect},
+@code{tdx},
+@code{avx512_bf16},
+@code{avx_vnni},
@code{noavx512f},
@code{noavx512cd},
@code{noavx512er},
@code{noavx512_vbmi2},
@code{noavx512_vnni},
@code{noavx512_bitalg},
+@code{noavx512_vp2intersect},
+@code{notdx},
+@code{noavx512_bf16},
+@code{noavx_vnni},
+@code{noenqcmd},
+@code{noserialize},
+@code{notsxldtrk},
+@code{amx_int8},
+@code{noamx_int8},
+@code{amx_bf16},
+@code{noamx_bf16},
+@code{amx_tile},
+@code{noamx_tile},
+@code{nouintr},
+@code{nohreset},
@code{vmx},
@code{vmfunc},
@code{smx},
@code{movbe},
@code{ept},
@code{lzcnt},
+@code{popcnt},
@code{hle},
@code{rtm},
@code{invpcid},
@code{clflush},
@code{mwaitx},
@code{clzero},
+@code{wbnoinvd},
+@code{pconfig},
+@code{waitpkg},
+@code{uintr},
+@code{cldemote},
+@code{rdpru},
+@code{mcommit},
+@code{sev_es},
@code{lwp},
@code{fma4},
@code{xop},
@code{3dnowa},
@code{sse4a},
@code{sse5},
-@code{svme},
-@code{abm} and
+@code{snp},
+@code{invlpgb},
+@code{tlbsync},
+@code{svme} and
@code{padlock}.
Note that rather than extending a basic instruction set, the extension
mnemonics starting with @code{no} revoke the respective functionality.
@option{-mavxscalar=@var{256}} will encode scalar AVX instructions
with 256bit vector length.
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
+@cindex @samp{-mvexwig=} option, i386
+@cindex @samp{-mvexwig=} option, x86-64
+@item -mvexwig=@var{0}
+@itemx -mvexwig=@var{1}
+These options control how the assembler should encode VEX.W-ignored (WIG)
+VEX instructions. @option{-mvexwig=@var{0}} will encode WIG VEX
+instructions with vex.w = 0, which is the default.
+@option{-mvexwig=@var{1}} will encode WIG EVEX instructions with
+vex.w = 1.
+
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
@cindex @samp{-mevexlig=} option, i386
@cindex @samp{-mevexlig=} option, x86-64
@item -mevexlig=@var{128}
slightly bigger. This option only affects the handling of branch
instructions.
+@cindex @samp{-mbig-obj} option, i386
@cindex @samp{-mbig-obj} option, x86-64
@item -mbig-obj
-On x86-64 PE/COFF target this option forces the use of big object file
+On PE/COFF target this option forces the use of big object file
format, which allows more than 32768 sections.
@cindex @samp{-momit-lock-prefix=} option, i386
relocations. The default can be controlled by a configure option
@option{--enable-x86-relax-relocations}.
+@cindex @samp{-malign-branch-boundary=} option, i386
+@cindex @samp{-malign-branch-boundary=} option, x86-64
+@item -malign-branch-boundary=@var{NUM}
+This option controls how the assembler should align branches with segment
+prefixes or NOP. @var{NUM} must be a power of 2. It should be 0 or
+no less than 16. Branches will be aligned within @var{NUM} byte
+boundary. @option{-malign-branch-boundary=0}, which is the default,
+doesn't align branches.
+
+@cindex @samp{-malign-branch=} option, i386
+@cindex @samp{-malign-branch=} option, x86-64
+@item -malign-branch=@var{TYPE}[+@var{TYPE}...]
+This option specifies types of branches to align. @var{TYPE} is
+combination of @samp{jcc}, which aligns conditional jumps,
+@samp{fused}, which aligns fused conditional jumps, @samp{jmp},
+which aligns unconditional jumps, @samp{call} which aligns calls,
+@samp{ret}, which aligns rets, @samp{indirect}, which aligns indirect
+jumps and calls. The default is @option{-malign-branch=jcc+fused+jmp}.
+
+@cindex @samp{-malign-branch-prefix-size=} option, i386
+@cindex @samp{-malign-branch-prefix-size=} option, x86-64
+@item -malign-branch-prefix-size=@var{NUM}
+This option specifies the maximum number of prefixes on an instruction
+to align branches. @var{NUM} should be between 0 and 5. The default
+@var{NUM} is 5.
+
+@cindex @samp{-mbranches-within-32B-boundaries} option, i386
+@cindex @samp{-mbranches-within-32B-boundaries} option, x86-64
+@item -mbranches-within-32B-boundaries
+This option aligns conditional jumps, fused conditional jumps and
+unconditional jumps within 32 byte boundary with up to 5 segment prefixes
+on an instruction. It is equivalent to
+@option{-malign-branch-boundary=32}
+@option{-malign-branch=jcc+fused+jmp}
+@option{-malign-branch-prefix-size=5}.
+The default doesn't align branches.
+
+@cindex @samp{-mlfence-after-load=} option, i386
+@cindex @samp{-mlfence-after-load=} option, x86-64
+@item -mlfence-after-load=@var{no}
+@itemx -mlfence-after-load=@var{yes}
+These options control whether the assembler should generate lfence
+after load instructions. @option{-mlfence-after-load=@var{yes}} will
+generate lfence. @option{-mlfence-after-load=@var{no}} will not generate
+lfence, which is the default.
+
+@cindex @samp{-mlfence-before-indirect-branch=} option, i386
+@cindex @samp{-mlfence-before-indirect-branch=} option, x86-64
+@item -mlfence-before-indirect-branch=@var{none}
+@item -mlfence-before-indirect-branch=@var{all}
+@item -mlfence-before-indirect-branch=@var{register}
+@itemx -mlfence-before-indirect-branch=@var{memory}
+These options control whether the assembler should generate lfence
+before indirect near branch instructions.
+@option{-mlfence-before-indirect-branch=@var{all}} will generate lfence
+before indirect near branch via register and issue a warning before
+indirect near branch via memory.
+It also implicitly sets @option{-mlfence-before-ret=@var{shl}} when
+there's no explict @option{-mlfence-before-ret=}.
+@option{-mlfence-before-indirect-branch=@var{register}} will generate
+lfence before indirect near branch via register.
+@option{-mlfence-before-indirect-branch=@var{memory}} will issue a
+warning before indirect near branch via memory.
+@option{-mlfence-before-indirect-branch=@var{none}} will not generate
+lfence nor issue warning, which is the default. Note that lfence won't
+be generated before indirect near branch via register with
+@option{-mlfence-after-load=@var{yes}} since lfence will be generated
+after loading branch target register.
+
+@cindex @samp{-mlfence-before-ret=} option, i386
+@cindex @samp{-mlfence-before-ret=} option, x86-64
+@item -mlfence-before-ret=@var{none}
+@item -mlfence-before-ret=@var{shl}
+@item -mlfence-before-ret=@var{or}
+@item -mlfence-before-ret=@var{yes}
+@itemx -mlfence-before-ret=@var{not}
+These options control whether the assembler should generate lfence
+before ret. @option{-mlfence-before-ret=@var{or}} will generate
+generate or instruction with lfence.
+@option{-mlfence-before-ret=@var{shl/yes}} will generate shl instruction
+with lfence. @option{-mlfence-before-ret=@var{not}} will generate not
+instruction with lfence. @option{-mlfence-before-ret=@var{none}} will not
+generate lfence, which is the default.
+
+@cindex @samp{-mx86-used-note=} option, i386
+@cindex @samp{-mx86-used-note=} option, x86-64
+@item -mx86-used-note=@var{no}
+@itemx -mx86-used-note=@var{yes}
+These options control whether the assembler should generate
+GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_FEATURE_2_USED
+GNU property notes. The default can be controlled by the
+@option{--enable-x86-used-note} configure option.
+
@cindex @samp{-mevexrcig=} option, i386
@cindex @samp{-mevexrcig=} option, x86-64
@item -mevexrcig=@var{rne}
@item -mamd64
@itemx -mintel64
This option specifies that the assembler should accept only AMD64 or
-Intel64 ISA in 64-bit mode. The default is to accept both.
+Intel64 ISA in 64-bit mode. The default is to accept common, Intel64
+only and AMD64 ISAs.
+
+@cindex @samp{-O0} option, i386
+@cindex @samp{-O0} option, x86-64
+@cindex @samp{-O} option, i386
+@cindex @samp{-O} option, x86-64
+@cindex @samp{-O1} option, i386
+@cindex @samp{-O1} option, x86-64
+@cindex @samp{-O2} option, i386
+@cindex @samp{-O2} option, x86-64
+@cindex @samp{-Os} option, i386
+@cindex @samp{-Os} option, x86-64
+@item -O0 | -O | -O1 | -O2 | -Os
+Optimize instruction encoding with smaller instruction size. @samp{-O}
+and @samp{-O1} encode 64-bit register load instructions with 64-bit
+immediate as 32-bit register load instructions with 31-bit or 32-bits
+immediates, encode 64-bit register clearing instructions with 32-bit
+register clearing instructions, encode 256-bit/512-bit VEX/EVEX vector
+register clearing instructions with 128-bit VEX vector register
+clearing instructions, encode 128-bit/256-bit EVEX vector
+register load/store instructions with VEX vector register load/store
+instructions, and encode 128-bit/256-bit EVEX packed integer logical
+instructions with 128-bit/256-bit VEX packed integer logical.
+
+@samp{-O2} includes @samp{-O1} optimization plus encodes
+256-bit/512-bit EVEX vector register clearing instructions with 128-bit
+EVEX vector register clearing instructions. In 64-bit mode VEX encoded
+instructions with commutative source operands will also have their
+source operands swapped if this allows using the 2-byte VEX prefix form
+instead of the 3-byte one. Certain forms of AND as well as OR with the
+same (register) operand specified twice will also be changed to TEST.
+
+@samp{-Os} includes @samp{-O2} optimization plus encodes 16-bit, 32-bit
+and 64-bit register tests with immediate as 8-bit register test with
+immediate. @samp{-O0} turns off this optimization.
@end table
@c man end
This directive is only available for COFF based x86 targets.
+@cindex @code{largecomm} directive, ELF
+@item .largecomm @var{symbol} , @var{length}[, @var{alignment}]
+This directive behaves in the same way as the @code{comm} directive
+except that the data is placed into the @var{.lbss} section instead of
+the @var{.bss} section @ref{Comm}.
+
+The directive is intended to be used for data which requires a large
+amount of space, and it is only available for ELF based x86_64
+targets.
+
+@cindex @code{value} directive
+@item .value @var{expression} [, @var{expression}]
+This directive behaves in the same way as the @code{.short} directive,
+taking a series of comma separated expressions and storing them as
+two-byte wide values into the current section.
+
@c FIXME: Document other x86 specific directives ? Eg: .code16gcc,
-@c .largecomm
@end table
In AT&T syntax the size of memory operands is determined from the last
character of the instruction mnemonic. Mnemonic suffixes of @samp{b},
@samp{w}, @samp{l} and @samp{q} specify byte (8-bit), word (16-bit), long
-(32-bit) and quadruple word (64-bit) memory references. Intel syntax accomplishes
-this by prefixing memory operands (@emph{not} the instruction mnemonics) with
-@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr} and @samp{qword ptr}. Thus,
-Intel @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
-syntax.
+(32-bit) and quadruple word (64-bit) memory references. Mnemonic suffixes
+of @samp{x}, @samp{y} and @samp{z} specify xmm (128-bit vector), ymm
+(256-bit vector) and zmm (512-bit vector) memory references, only when there's
+no other way to disambiguate an instruction. Intel syntax accomplishes this by
+prefixing memory operands (@emph{not} the instruction mnemonics) with
+@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr}, @samp{qword ptr},
+@samp{xmmword ptr}, @samp{ymmword ptr} and @samp{zmmword ptr}. Thus, Intel
+syntax @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
+syntax. In Intel syntax, @samp{fword ptr}, @samp{tbyte ptr} and
+@samp{oword ptr} specify 48-bit, 80-bit and 128-bit memory references.
In 64-bit code, @samp{movabs} can be used to encode the @samp{mov}
instruction with the 64-bit displacement or immediate operand.
logical line number directive (@pxref{Comments}) or a preprocessor
control command (@pxref{Preprocessing}).
-If the @option{--divide} command line option has not been specified
+If the @option{--divide} command-line option has not been specified
then the @samp{/} character appearing anywhere on a line also
introduces a line comment.
operand size. (This incompatibility does not affect compiler output
since compilers always explicitly specify the mnemonic suffix.)
-Almost all instructions have the same names in AT&T and Intel format.
-There are a few exceptions. The sign extend and zero extend
-instructions need two sizes to specify them. They need a size to
-sign/zero extend @emph{from} and a size to zero extend @emph{to}. This
-is accomplished by using two instruction mnemonic suffixes in AT&T
-syntax. Base names for sign extend and zero extend are
-@samp{movs@dots{}} and @samp{movz@dots{}} in AT&T syntax (@samp{movsx}
-and @samp{movzx} in Intel syntax). The instruction mnemonic suffixes
-are tacked on to this base name, the @emph{from} suffix before the
-@emph{to} suffix. Thus, @samp{movsbl %al, %edx} is AT&T syntax for
-``move sign extend @emph{from} %al @emph{to} %edx.'' Possible suffixes,
-thus, are @samp{bl} (from byte to long), @samp{bw} (from byte to word),
-@samp{wl} (from word to long), @samp{bq} (from byte to quadruple word),
-@samp{wq} (from word to quadruple word), and @samp{lq} (from long to
-quadruple word).
+When there is no sizing suffix and no (suitable) register operands to
+deduce the size of memory operands, with a few exceptions and where long
+operand size is possible in the first place, operand size will default
+to long in 32- and 64-bit modes. Similarly it will default to short in
+16-bit mode. Noteworthy exceptions are
+
+@itemize @bullet
+@item
+Instructions with an implicit on-stack operand as well as branches,
+which default to quad in 64-bit mode.
+
+@item
+Sign- and zero-extending moves, which default to byte size source
+operands.
+
+@item
+Floating point insns with integer operands, which default to short (for
+perhaps historical reasons).
+
+@item
+CRC32 with a 64-bit destination, which defaults to a quad source
+operand.
+
+@end itemize
@cindex encoding options, i386
@cindex encoding options, x86-64
@item
@samp{@{disp32@}} -- prefer 32-bit displacement.
+@item
+@samp{@{disp16@}} -- prefer 16-bit displacement.
+
@item
@samp{@{load@}} -- prefer load-form instruction.
@samp{@{store@}} -- prefer store-form instruction.
@item
-@samp{@{vex2@}} -- prefer 2-byte VEX prefix for VEX instruction.
+@samp{@{vex@}} -- encode with VEX prefix.
@item
-@samp{@{vex3@}} -- prefer 3-byte VEX prefix for VEX instruction.
+@samp{@{vex3@}} -- encode with 3-byte VEX prefix.
@item
@samp{@{evex@}} -- encode with EVEX prefix.
+
+@item
+@samp{@{rex@}} -- prefer REX prefix for integer and legacy vector
+instructions (x86-64 only). Note that this differs from the @samp{rex}
+prefix which generates REX prefix unconditionally.
+
+@item
+@samp{@{nooptimize@}} -- disable instruction size optimization.
@end itemize
+Mnemonics of Intel VNNI instructions are encoded with the EVEX prefix
+by default. The pseudo @samp{@{vex@}} prefix can be used to encode
+mnemonics of Intel VNNI instructions with the VEX prefix.
+
@cindex conversion instructions, i386
@cindex i386 conversion instructions
@cindex conversion instructions, x86-64
@samp{cqto} in AT&T naming. @code{@value{AS}} accepts either naming for these
instructions.
+@cindex extension instructions, i386
+@cindex i386 extension instructions
+@cindex extension instructions, x86-64
+@cindex x86-64 extension instructions
+The Intel-syntax extension instructions
+
+@itemize @bullet
+@item
+@samp{movsx} --- sign-extend @samp{reg8/mem8} to @samp{reg16}.
+
+@item
+@samp{movsx} --- sign-extend @samp{reg8/mem8} to @samp{reg32}.
+
+@item
+@samp{movsx} --- sign-extend @samp{reg8/mem8} to @samp{reg64}
+(x86-64 only).
+
+@item
+@samp{movsx} --- sign-extend @samp{reg16/mem16} to @samp{reg32}
+
+@item
+@samp{movsx} --- sign-extend @samp{reg16/mem16} to @samp{reg64}
+(x86-64 only).
+
+@item
+@samp{movsxd} --- sign-extend @samp{reg32/mem32} to @samp{reg64}
+(x86-64 only).
+
+@item
+@samp{movzx} --- zero-extend @samp{reg8/mem8} to @samp{reg16}.
+
+@item
+@samp{movzx} --- zero-extend @samp{reg8/mem8} to @samp{reg32}.
+
+@item
+@samp{movzx} --- zero-extend @samp{reg8/mem8} to @samp{reg64}
+(x86-64 only).
+
+@item
+@samp{movzx} --- zero-extend @samp{reg16/mem16} to @samp{reg32}
+
+@item
+@samp{movzx} --- zero-extend @samp{reg16/mem16} to @samp{reg64}
+(x86-64 only).
+@end itemize
+
+@noindent
+are called @samp{movsbw/movsxb/movsx}, @samp{movsbl/movsxb/movsx},
+@samp{movsbq/movsb/movsx}, @samp{movswl/movsxw}, @samp{movswq/movsxw},
+@samp{movslq/movsxl}, @samp{movzbw/movzxb/movzx},
+@samp{movzbl/movzxb/movzx}, @samp{movzbq/movzxb/movzx},
+@samp{movzwl/movzxw} and @samp{movzwq/movzxw} in AT&T syntax.
+
@cindex jump instructions, i386
@cindex call instructions, i386
@cindex jump instructions, x86-64
assembler with different mnemonics from those in Intel IA32 specification.
@code{@value{GCC}} generates those instructions with AT&T mnemonic.
+@itemize @bullet
+@item @samp{movslq} with AT&T mnemonic only accepts 64-bit destination
+register. @samp{movsxd} should be used to encode 16-bit or 32-bit
+destination register with both AT&T and Intel mnemonics.
+@end itemize
+
@node i386-Regs
@section Register Naming
@end itemize
-The AVX2 extensions made in 64-bit mode more registers available:
-
-@itemize @bullet
-
-@item
-the 16 128-bit registers @samp{%xmm16}--@samp{%xmm31} and the 16 256-bit
-registers @samp{%ymm16}--@samp{%ymm31}.
-
-@end itemize
-
The AVX512 extensions added the following registers:
@itemize @bullet
@item
Integer constructors are @samp{.word}, @samp{.long} or @samp{.int}, and
@samp{.quad} for the 16-, 32-, and 64-bit integer formats. The
-corresponding instruction mnemonic suffixes are @samp{s} (single),
+corresponding instruction mnemonic suffixes are @samp{s} (short),
@samp{l} (long), and @samp{q} (quad). As with the 80-bit real format,
the 64-bit @samp{q} format is only present in the @samp{fildq} (load
quad integer to stack top) and @samp{fistpq} (store quad integer and pop
@item @samp{i486} @tab @samp{i586} @tab @samp{i686} @tab @samp{pentium}
@item @samp{pentiumpro} @tab @samp{pentiumii} @tab @samp{pentiumiii} @tab @samp{pentium4}
@item @samp{prescott} @tab @samp{nocona} @tab @samp{core} @tab @samp{core2}
-@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @samp{iamcu}
+@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @tab @samp{iamcu}
@item @samp{k6} @tab @samp{k6_2} @tab @samp{athlon} @tab @samp{k8}
@item @samp{amdfam10} @tab @samp{bdver1} @tab @samp{bdver2} @tab @samp{bdver3}
-@item @samp{bdver4} @tab @samp{znver1} @tab @samp{btver1} @tab @samp{btver2}
-@item @samp{generic32} @tab @samp{generic64}
-@item @samp{.mmx} @tab @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
+@item @samp{bdver4} @tab @samp{znver1} @tab @samp{znver2} @tab @samp{znver3}
+@item @samp{btver1} @tab @samp{btver2} @tab @samp{generic32} @tab @samp{generic64}
+@item @samp{.cmov} @tab @samp{.fxsr} @tab @samp{.mmx}
+@item @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3} @tab @samp{.sse4a}
@item @samp{.ssse3} @tab @samp{.sse4.1} @tab @samp{.sse4.2} @tab @samp{.sse4}
@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.ept}
@item @samp{.clflush} @tab @samp{.movbe} @tab @samp{.xsave} @tab @samp{.xsaveopt}
@item @samp{.aes} @tab @samp{.pclmul} @tab @samp{.fma} @tab @samp{.fsgsbase}
@item @samp{.rdrnd} @tab @samp{.f16c} @tab @samp{.avx2} @tab @samp{.bmi2}
-@item @samp{.lzcnt} @tab @samp{.invpcid} @tab @samp{.vmfunc} @tab @samp{.hle}
+@item @samp{.lzcnt} @tab @samp{.popcnt} @tab @samp{.invpcid} @tab @samp{.vmfunc}
+@item @samp{.hle}
@item @samp{.rtm} @tab @samp{.adx} @tab @samp{.rdseed} @tab @samp{.prfchw}
@item @samp{.smap} @tab @samp{.mpx} @tab @samp{.sha} @tab @samp{.prefetchwt1}
@item @samp{.clflushopt} @tab @samp{.xsavec} @tab @samp{.xsaves} @tab @samp{.se1}
@item @samp{.avx512vl} @tab @samp{.avx512bw} @tab @samp{.avx512dq} @tab @samp{.avx512ifma}
@item @samp{.avx512vbmi} @tab @samp{.avx512_4fmaps} @tab @samp{.avx512_4vnniw}
@item @samp{.avx512_vpopcntdq} @tab @samp{.avx512_vbmi2} @tab @samp{.avx512_vnni}
-@item @samp{.avx512_bitalg}
-@item @samp{.clwb} @tab @samp{.rdpid} @tab @samp{.ptwrite} @tab @item @samp{.cet}
+@item @samp{.avx512_bitalg} @tab @samp{.avx512_bf16} @tab @samp{.avx512_vp2intersect}
+@item @samp{.tdx} @tab @samp{.avx_vnni}
+@item @samp{.clwb} @tab @samp{.rdpid} @tab @samp{.ptwrite} @tab @item @samp{.ibt}
+@item @samp{.wbnoinvd} @tab @samp{.pconfig} @tab @samp{.waitpkg} @tab @samp{.cldemote}
+@item @samp{.shstk} @tab @samp{.gfni} @tab @samp{.vaes} @tab @samp{.vpclmulqdq}
+@item @samp{.movdiri} @tab @samp{.movdir64b} @tab @samp{.enqcmd} @tab @samp{.tsxldtrk}
+@item @samp{.amx_int8} @tab @samp{.amx_bf16} @tab @samp{.amx_tile}
+@item @samp{.kl} @tab @samp{.widekl} @tab @samp{.uintr} @tab @samp{.hreset}
@item @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a} @tab @samp{.sse5}
-@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme} @tab @samp{.abm}
+@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme}
@item @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop} @tab @samp{.cx16}
-@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx} @tab @samp{.gfni}
-@item @samp{.vaes} @tab @samp{.vpclmulqdq}
+@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx} @tab @samp{.rdpru}
+@item @samp{.mcommit} @tab @samp{.sev_es} @tab @samp{.snp} @tab @samp{.invlpgb}
+@item @samp{.tlbsync}
@end multitable
Apart from the warning, there are only two other effects on
.arch i8086,nojumps
@end smallexample
+@node i386-ISA
+@section AMD64 ISA vs. Intel64 ISA
+
+There are some discrepancies between AMD64 and Intel64 ISAs.
+
+@itemize @bullet
+@item For @samp{movsxd} with 16-bit destination register, AMD64
+supports 32-bit source operand and Intel64 supports 16-bit source
+operand.
+
+@item For far branches (with explicit memory operand), both ISAs support
+32- and 16-bit operand size. Intel64 additionally supports 64-bit
+operand size, encoded as @samp{ljmpq} and @samp{lcallq} in AT&T syntax
+and with an explicit @samp{tbyte ptr} operand size specifier in Intel
+syntax.
+
+@item @samp{lfs}, @samp{lgs}, and @samp{lss} similarly allow for 16-
+and 32-bit operand size (32- and 48-bit memory operand) in both ISAs,
+while Intel64 additionally supports 64-bit operand sise (80-bit memory
+operands).
+
+@end itemize
+
@node i386-Bugs
@section AT&T Syntax bugs
projects / thirdparty / binutils-gdb.git / blobdiff