]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blobdiff - gas/testsuite/gas/elf/elf.exp
Add support for RISC-V architecture.
[thirdparty/binutils-gdb.git] / gas / testsuite / gas / elf / elf.exp
index f21d838e3633aa1abb240311b432c0f7d7b85414..df9f4ba7b0fc287434c81d80e422d6a6bed70271 100644 (file)
@@ -1,3 +1,19 @@
+# Copyright (C) 2012-2016 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  
+
 #
 # elf tests
 #
@@ -37,19 +53,7 @@ proc run_elf_list_test { name suffix opts readelf_opts readelf_pipe } {
 }
 
 # We're testing bits in obj-elf -- don't run on anything else.
-if { ([istarget "*-*-*elf*"]
-      || [istarget "*-*-linux*"]
-      || [istarget "*-*-gnu*"]
-      || [istarget "m6811-*"]
-      || [istarget "m6812-*"]
-      || [istarget "sparc*-*-solaris*"]
-      || [istarget "mips*-*-irix6*"]
-      || [istarget "arm*-*-eabi"])
-     && ![istarget *-*-linux*aout*]
-     && ![istarget *-*-linux*coff*]
-     && ![istarget *-*-linux*oldld*]
-     && ![istarget sh64*-*-linux*]
-} then {
+if { [is_elf_format] } then {
     set target_machine ""
     if {[istarget "mips*-*-*"]} then {
        set target_machine -mips
@@ -57,6 +61,9 @@ if { ([istarget "*-*-*elf*"]
     if {[istarget m32r*-*-*]} then {
        set target_machine -m32r
     }
+    if {[istarget "msp430-*-*"]} then {
+       set target_machine -msp430
+    }
     if {[istarget "score-*-*"]} then {
        set target_machine -score
     }
@@ -69,16 +76,14 @@ if { ([istarget "*-*-*elf*"]
     if {[istarget "rx-*-*"]} then {
        set target_machine -rx
     }
-    if { ([istarget "*arm*-*-*"]
-         || [istarget "xscale*-*-*"]) } {
-
-       if { ([istarget "*-*-*eabi"]
-             || [istarget "*-*-linux-*"]
-             || [istarget "*-*-symbianelf"])} then {
-           set target_machine -armeabi
-       } else {
-           set target_machine -armelf
-       }
+    if {[istarget "v850*-*-*"]} then {
+       set target_machine -v850
+    }
+    if {[istarget "rl78-*-*"]} then {
+       set target_machine -rl78
+    }
+    if {[istarget "arm*-*-*"]} {
+       set target_machine -arm
     }
 
     # The MN10300 and Xtensa ports disable the assembler's call frame
@@ -86,6 +91,8 @@ if { ([istarget "*-*-*elf*"]
     # function prologues.
     if {![istarget "mn10300-*-*"]
        && ![istarget "xtensa*-*-*"]
+       && ![istarget "msp430*-*-*"]
+       && ![istarget "nds32*-*-*"]
        && ![istarget "am3*-*-*"]} then {
       run_dump_test "ehopt0"
     }
@@ -103,13 +110,24 @@ if { ([istarget "*-*-*elf*"]
            run_dump_test "file"
        }
     }
+    run_dump_test "file-2"
+    setup_xfail "nds32*-*-*"
     run_dump_test "group0a"
     run_dump_test "group0b"
     run_dump_test "group0c"
     run_dump_test "group1a"
     run_dump_test "group1b"
-    run_dump_test "groupautoa"
+    run_dump_test "group2"
+    case $target_triplet in {
+       { hppa64*-*-hpux* } { }
+       { riscv*-*-* } { }
+       default {
+           run_dump_test "groupautoa"
+       }
+    }
     case $target_triplet in {
+       { hppa64*-*-hpux* } { }
+       { riscv*-*-* } { }
        { xtensa*-*-* } { }
        default {
            run_dump_test "groupautob"
@@ -117,6 +135,7 @@ if { ([istarget "*-*-*elf*"]
     }
     case $target_triplet in {
        { alpha*-*-* } { }
+       { *c54x*-*-* } { }
        { cr16*-*-* } { }
        { crx*-*-* } { }
        { h8300-*-* } { }
@@ -125,13 +144,16 @@ if { ([istarget "*-*-*elf*"]
        { mips*-*-* } { }
        { mn10200-*-* } { }
        { mn10300-*-* } { }
-       { *c54x*-*-* } { }
+       { msp43*-*-* } { }
+       { rl78-*-* } { }
+       { riscv*-*-* } { }
        { rx-*-* } { }
        default {
            # The next test can fail if the target does not convert fixups
            # against ordinary symbols into relocations against section symbols.
            # This is usually revealed by the error message:
            #  symbol `sym' required but not present
+           setup_xfail "m681*-*-*" "m68hc*-*-*" "xgate-*-*" "vax-*-*"
            run_dump_test redef
            run_dump_test equ-reloc
        }
@@ -160,26 +182,61 @@ if { ([istarget "*-*-*elf*"]
     }
     run_dump_test "symver"
 
-    # The MSP port sets the ELF header's OSABI field to ELFOSABI_STANDALONE.
+    # No indirect functions on non-GNU targets.
+    # The Visium and MSP set the ELF header's OSABI field to ELFOSABI_STANDALONE.
     # The non-eabi ARM ports sets it to ELFOSABI_ARM.
     # So for these targets we cannot include an IFUNC symbol type
     # in the symbol type test.
-    if {   [istarget "msp*-*-*"]
-       || [istarget "arm*-*-*"]
-       || [istarget "xscale*-*-*"]} then {
+    # We also need to exclude targets that do not support unique objects.
+    if {    [istarget "*-*-hpux*"]
+        || [istarget "arm*-*-*"]
+        || [istarget "msp*-*-*"]
+        || [istarget "visium-*-*"]
+        || ![supports_gnu_unique]
+     } then {
+       # hppa64 has a non-standard common directive
+       if { ![istarget "hppa64*-*-hpux*"] } then {
            run_elf_list_test "type-noifunc" "" "" "-s" "| grep \"1 *\\\[FONTC\\\]\""
+       }
     } else {
-           run_dump_test ifunc-1
-           run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
+       run_dump_test ifunc-1
+       run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
     }
 
     run_dump_test "section6"
     run_dump_test "section7"
     run_dump_test "section8"
     run_dump_test "section9"
+    run_dump_test "section10"
+    run_dump_test "section11"
     run_dump_test "dwarf2-1"
     run_dump_test "dwarf2-2"
     run_dump_test "dwarf2-3"
     run_dump_test "dwarf2-4"
+    run_dump_test "bss"
+    run_dump_test "bad-bss"
     run_dump_test "bad-section-flag"
+    run_dump_test "bad-size"
+    run_dump_test "bad-group"
+
+    run_dump_test "syms"
+    
+    # hpux has a non-standard common directive.
+    if { ![istarget "*-*-hpux*"] } then {
+       run_dump_test "common1"
+       run_dump_test "common2"
+       run_dump_test "common3a"
+       run_dump_test "common3b"
+       run_dump_test "common4a"
+       run_dump_test "common4b"
+    }
+
+    run_dump_test "strtab"
+
+    run_dump_test "bignums"
+    
+    load_lib gas-dg.exp
+    dg-init
+    dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/err-*.s $srcdir/$subdir/warn-*.s]] "" ""
+    dg-finish
 }