-start-sanitize-carp start-sanitize-vr4xxx
-Wed Jan 27 15:09:22 1999 Andrew Cagney <cagney@chook.cygnus.com>
+2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * mips-tdep.c (mips_gdbarch_init): Trace e_flags from BFD
- elf_info.
+ From Grant Edwards <grante@visi.com> (original patch from Thomas
+ Zenker ):
+ * rdi-share/ardi.c: Allow interruption of interruptible
+ targets with a <CNTL-C>.
-end-sanitize-carp end-sanitize-vr4xxx
-Tue Jan 26 16:02:47 1999 Mark Alexander <marka@cygnus.com>
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * v850-tdep.c (v850_generic_reg_names, v850e_reg_names,
- v850_register_names, v850_processor_type_table): Declare tables
- and structures for handling differences in register names for
- v850 and v850e.
- (struct reg_list): Define new structure for creating tables
- of register bit masks in v850e instrutions.
- (handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
- (v850_scan_prologue): Recognize v850e instructions: callt, prepare,
- and pushm.
- (v850_target_architecture_hook): New function to set register
- names based on current machine.
- (_initialize_v850_tdep): Set up target_architecture_hook.
- * config/v850/tm-v850.h (v850_register_names): Declare.
- (REGISTER_NAME): Define to refer to v850_register_names.
- (SR0_REGNUM, CTBP_REGNUM): Define.
- (PS_REGNUM): Redefine in terms of SR0_REGNUM.
+ * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
+ to control port to accommodate some versions of Angel.
-Tue Jan 26 18:27:26 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * Makefile.in (c-exp.tab.c): use BISON instead of YACC, to pick
- the correct value from configure output.
- (jv-exp.tab.c): ditto.
- (f-exp.tab.c): ditto.
- (m2-exp.tab.c): ditto.
+ * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
+ Add interpretation for C Support Library packets.
-1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * breakpoint.h (ep_is_exception_catchpoint): Add prototype.
- * frame.h (select_and_print_frame): Add prototype.
- * stack.c (func_command): Call select_and_print_frame with correct
- number of arguments. Reformat whitespace.
+ * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
+ is now being modified.
+ * rdi-share/devsw.h: Adjust declaration of the above funtion.
-Tue Jan 26 16:53:54 1999 Fernando Nasser <fnasser@cygnus.com>
-
- * remote.c (remote_query): fix maximum packet size to account for
- remote_debug use.
- (putpkt): add comment to alert about extra byte need.
-
-Mon Jan 25 19:55:30 1999 Mark Alexander <marka@cygnus.com>
-
- * sh-tdep.c (sh_target_architecture_hook): Return immediately
- when a matching machine is found.
-
-Fri Jan 22 09:10:35 1999 Mark Alexander <marka@cygnus.com>
-
- * remote-mips.c (mips_initialize): Fix parameters to clear_breakpoint.
- (common_breakpoint): Restore support for instruction breakpoints
- on non-LSI targets.
-
-Thu Jan 21 17:16:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * stack.c: Close open comment.
- * symtab.c (find_pc_sect_line): Ditto.
-
-Thu Jan 21 17:51:51 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * procfs.c (init_procfs_ops): New function, fills in procfs_ops,
- init only nonzero fields, leave to_require_attach and
- to_require_detach empty, not needed for /proc systems yet.
- (_initialize_procfs): Call init_procfs_ops.
-
- From J.T. Conklin <jtc@redbacknetworks.com>:
- * top.c (init_main): Fix tipo in description of the remotetimeout
- variable.
- * breakpoint.c (bpstat_stop_status): Handle systems where
- DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
-
-Thu Jan 21 17:25:46 1999 Mark Alexander <marka@cygnus.com>
-
- * mon960-rom.c (_initialize_mon960): Call init_mon960_cmds
- to fill in mon960_cmds structure properly.
-
-Wed Jan 20 17:53:22 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-sds.c (sds_ops): Define only once.
- (init_sds_ops, sds_command, _initialize_remote_sds): Declare.
- (init_sds_ops): Init only non-zero fields.
-
-Wed Jan 20 15:45:15 1999 Mark Alexander <marka@cygnus.com>
-
- * h8300-tdep.c (original_register_names, h8300h_register_names,
- h8300_register_names): Define new variables.
- (set_register_names): New function to set register names based on
- current CPU type.
- (h8300_command, h8300h_command, h8300s_command): Call
- set_register_names.
- * config/h8300/tm-h8300.h (h8300_register_names): Declare.
- (REGISTER_NAME): Define to refer to h8300_register_names.
-
-1999-01-19 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * sol-thread.c abug-rom.c cpu32bug-rom.c dbug-rom.c m32r-rom.c
- mac-nat.c mon960-rom.c op50-rom.c ppc-bdm.c remote-adapt.c
- remote-array.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c
- remote-est.c remote-hms.c remote-mm.c remote-nindy.c remote-nrom.c
- remote-os9k.c remote-rdp.c remote-sds.c remote-sim.c remote-st.c
- remote-udi.c rom68k-rom.c sh3-rom.c sparcl-tdep.c sparclet-rom.c
- v850ice.c win32-nat.c: cosmetic changes to conform to coding
- standards.
-
-1999-01-19 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Use aclocal to generate GDB's aclocal.m4 script.
- * acinclude.m4: New file, containing the hand-written local macro
- definitions that used to be in aclocal.m4. Don't sinclude
- ../bfd/aclocal.m4 any more; running aclocal in this directory will
- get us the definitions we need. HOWEVER: Do sinclude
- ../bfd/acinclude.m4, because we need the definition of
- BFD_NEED_DECLARATION.
- * aclocal.m4: Regenerated by aclocal.
- * configure: Regenerated by autoconf.
-
-Tue Jan 19 10:27:23 1999 David Taylor <taylor@texas.cygnus.com>
-
- * breakpoint.c (disable_breakpoints_in_shlibs): new parameter,
- silent, controls whether to print message about removal of shared
- library breakpoints.
- * breakpoint.h (disable_breakpoints_in_shlibs): decl updated.
- * irix5-nat.c (clear_solib): call disable_breakpoints_in_shlibs.
- * osfsolib.c (clear_solib): ditto.
- * solib.c (clear_solib): ditto.
- * somsolib.c (som_solib_restart): update call to
- disable_breakpoints_in_shlibs.
-
- * target.h (child_post_attach): only declare if CHILD_POST_ATTACH
- is define.
-
-Tue Jan 19 18:07:11 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * corelow.c (solib_add_stub): Ditto.
- (core_file_to_sym_file): Cast make_cleanup parameter.
-
- * solib.c (symbol_add_stub, solib_map_sections): Change argument
- to PTR insted of a char*. Matches catch_errors interface.
-
-Mon Jan 18 14:01:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-array.c (array_open): Don't use fprintf_filtered to send
- data to the log file.
-
- * remote-array.c (handle_load_dll): Change argument type to PTR so
- that it is compatible with catch_errors.
- * ocd.c (ocd_start_remote): Ditto.
- * remote-sds.c (sds_start_remote): Ditto.
-
- * win32-nat.c (win32_child_thread_alive): Namespace proof
- child_thread_alive.
- (init_child_ops): Update.
-
-Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-rdi.c (arm_rdi_open): Set gdb_hostif.hostosarg and
- gdb_hostif.dbgarg to NULL instead of stdout.
- (voiddummy, myprint, mywritec): Use gdb_stdout instead of stdout.
-
-Mon Jan 18 16:40:50 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * ser-ocd.c (ocd_open): Handle Unix case gracefully.
-
- * target.c (dummy_target): Don't initialize statically.
- (init_dummy_target): New function, fills in dummy_target.
- (initialize_targets): Use it.
- * hpux-thread.c (hpux_thread_ops): Don't initialize statically.
- (init_hpux_thread_ops): New function, fills in hpux_thread_ops.
- (_initialize_hpux_thread): Use it.
- * m3-nat.c (m3_ops): Don't initialize statically.
- (init_m3_ops): New function, fills in m3_ops.
- (_initialize_m3): Use it.
-
-1999-01-18 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * sol-thread.c: delete compile time initialization of target_ops
- (_initialize_sol_thread): initialize target_ops at run time.
- * hpux-thread.c: added target_ops entry.
- * m3-nat.c: ditto.
-
-Mon Jan 18 15:19:13 1999 David Taylor <taylor@texas.cygnus.com>
-
- * procfs.c (procfs_ops): delete compile time initialization.
- (_initialize_procfs): initialize procfs_ops at run time.
-
-Mon Jan 18 12:51:44 1999 Christopher Faylor <cgf@cygnus.com>
-
- * configure.in: Ensure that -luser32 is always linked in
- for cygwin build.
- * configure: Regenerated.
-
-Mon Jan 18 08:38:05 1999 Mark Alexander <marka@cygnus.com>
-
- * values.c (value_virtual_fn_field): Clear the pointed-to
- offset when casting to the base class.
-
-Mon Jan 18 10:30:51 1999 David Taylor <taylor@texas.cygnus.com>
-
- * remote-udi.c (init_udi_ops): change non-existant udi_run_ops to
- udi_ops; delete NULL initializers.
-
-Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * serial.c (serial_close): gdb_fclose tages gdb_file** arg, not
- gdb_file*.
-
- * f-valprint.c, target.c, gdbarch.c: Pass gdb_stderr not stderr.
-
-Mon Jan 18 10:46:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * stack.c (print_frame_info_base): Don't cast call to
- catch_errors.
- (print_args_stub): Change char* arg to PTR.
- * symmisc.c (print_symbol): Ditto.
- * top.c (quit_cover): Ditto.
- * remote.c (remote_open_1, remote_start_remote): Ditto.
- * infrun.c (normal_stop, hook_stop_stub, restore_selected_frame):
- Ditto.
-
- * stack.c (backtrace_command): Cast first arg of make_cleanup to
- make_cleanup_func.
- * remote.c (remote_kill): Cast putpkt arg to catch_errors_ftype.
-
-Mon Jan 18 08:47:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h (catch_errors_ftype): Define.
- (catch_errors): Replace char* arg with PTR arg.
- * top.c (catch_errors): Update
-
- * breakpoint.c (bpstat_stop_status, bpstat_stop_status,
- delete_breakpoint, breakpoint_re_set): Delete all casts in call to
- catch_errors.
- (breakpoint_cond_eval, watchpoint_check,
- cover_target_enable_exception_callback, breakpoint_re_set_one):
- Arg is PTR not char*.
-
- * breakpoint.c (cover_target_enable_exception_callback): Change
- type to int. Check for cast values of 0 and -1. Return a result!
- (insert_breakpoints): Move declaration of SAL and ARGS to where
- they are used.
-
-1999-01-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * remote.c (remote_query): new function - creates proper interface
- to the remote protocol "q" command.
-
-Fri Jan 15 17:11:48 EST 1999 Zdenek Radouch (radouch@cygnus.com)
-
- * config/fr30/tm-fr30.h: Changed ABI to match GCC change
- (always use pointer for structs passed by value).
-
-1999-01-15 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * target.h: added entry for target queries (to_query)
- target.c: ditto.
-
-Thu Jan 14 18:29:17 1999 David Taylor <taylor@texas.cygnus.com>
-
-start-sanitize-carp start-sanitize-vr4xxx
- * mips-tdep.c (mips_gdbarch_init): fix stream arg in
- fprintf_unfiltered calls.
-end-sanitize-carp end-sanitize-vr4xxx
- * remote-mm.c (mm_wait): fix stream arg to gdb_flush.
- * remote-udi.c (udi_wait): fix stream arg to fwrite.
- * symmisc.c (maintenance_check_symtabs): fix stream argument to
- print_address_numeric.
-
-Wed Jan 13 19:33:16 1999 David Taylor <taylor@texas.cygnus.com>
-
- * breakpoint.c (insert_breakpoints): insert cast to eliminate
- warning.
-
-Wed Jan 13 14:59:02 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * infrun.c (set/show scheduler-locking) New command. Set a
- mode bit that will control how GDB attempts to control thread
- scheduling for step, continue, etc. (resume): make use of
- the schedule-locking mode.
- * target.h (struct target_ops): new field to_has_thread_control.
- * sol-thread.c: initialize target_ops to_has_thread_control.
- * procfs.c: ditto.
- * target.c: ditto.
- * m3-nat.c: ditto.
- * remote.c: ditto.
- * hpux-thread.c: ditto.
- * thread.c: cull duplicate prototypes. Move prototypes to top.
- * serial.c: indentation cleanup.
- * breakpoint.c: add casts to eliminate compiler warnings.
-
-Tue Jan 12 17:00:00 1999 Edith Epstein <eepstein@sophia.cygnus.com>
-
- * inftarg.c (child_create_inferior): fixed HPUXHPPA specific
- call to fork_inferior. The shell param is now NULL.
-
-1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * monitor.c (init_base_monitor_ops): Whitespace cleanup.
- (_initialize_remote_monitors): Same.
-
-1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * monitor.c (init_monitor_ops): Initialize the monitor_ops
- structure if it hasn't already been done.
-
-Tue Jan 12 14:50:10 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * inftarg.c (child_ops): Don't initialize statically.
- (init_child_ops): New function, fills in child_ops.
- (_initialize_inftarg): Use it.
- (child_post_attach): Declare extern.
- (child_wait): Fix ambiguous parens.
- (child_attach_to_process): Remove unused local wstatus.
- (child_insert_fork_catchpoint, child_remove_fork_catchpoint,
- child_insert_vfork_catchpoint, child_remove_vfork_catchpoint,
- child_has_forked, child_insert_exec_catchpoint,
- child_remove_exec_catchpoint): Return a value.
-
-Mon Jan 11 16:43:44 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (remote_wait): Add inferior_pid to thread list only
- if it is not already there.
-
-1999-01-11 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * scm-tags.h: Update FSF's address on copyright notice.
- * ser-e7kpc.c: Same.
- * gnu-nat.h: Same.
-
-Mon Jan 11 13:45:57 1999 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * dwarf2read.c (dump_die): Change stderr to gdb_stderr.
- * expprint.c (print_subexp): fprintf => fprintf_unfiltered.
- * jv-typeprint.c (java_type_print_base): fputs => fputs_filtered.
- * stack.c (struct function_bounds): Remove superfluous `typedef'.
- * symfile.c (list_overlays_command): stdout => gdb_stdout.
- * symmisc.c (maintenance_check_symtabs): stdout => gdb_stdout.
- * utils.c (print_spaces): Make more efficient.
-
-Mon Jan 11 13:55:51 1999 David Taylor <taylor@texas.cygnus.com>
-
- * utils (print_spaces): fix arg to strcat; fix formatting.
-
-Fri Jan 8 11:57:24 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * exec.c (exec_ops): Don't initialize statically.
- (init_exec_ops): New function, fills in exec_ops.
- (_initialize_exec): Use it.
-
-Thu Jan 7 17:50:15 EST 1999 Zdenek Radouch (radouch@cygnus.com)
-
- Beta FR30 port.
- * fr30-tdep.c
- * config/fr30/tm-fr30.h
-
-Wed Jan 6 12:28:35 1999 David Taylor <taylor@texas.cygnus.com>
-
- * configure.in: Add an --enable-tui argument. Construct
- tui/Makefile from tui/Makefile.in. Use AM_PROG_CC_STDC. If we
- have the GUI, then we need this to process libgui.h.
- (ENABLE_CFLAGS): define and export BUILD_TUI.
- (AC_CHECK_HEADERS): Add check for term.h.
-
- * configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
-
- * config.in, configure : regenerated.
-
- * Makefile.in: Allow the TUI code to be conditionally enabled.
- (TUI_LIBRARY): New variable, value are set by the configuration
- script. Set to the empty string when the TUI isn't enabled.
- (gdb$(GDBEXT)): Use those, instead of referring to all-tui and
- tui/libtui.a directly.
- (BUILD_TUI): build the tui -- only when configured with
- --enable-tui.
- (YLWRAP): use ylwrap to avoid problems on systems w/o bison.
- (gdb$(EXEEXT)): make it dependent on BUILD_TUI.
- (all-tui): remove dependency from phony target.
- (c-exp.tab.c): use ylwrap instead of bison.
- (jv-exp.tab.c): ditto.
- (f-exp.tab.c): ditto.
- (m2-exp.tab.c): ditto.
- (ALLDEPFILES): add somread.c, hp-psymtab-read.c, hp-symtab-read.c.
- (SFILES): remove the above files
- (COMMON_OBS): remove somread.o
- (SFILES): Add the tui files to this, so they get included in etags
- tables.
- (gdb$(EXEEXT)): Add all-tui to the list of dependencies, and add
- tui/libtui.a to the link list.
- (all-tui): New rule, which does a recursive make in the tui
- subdir.
- (tui/libtui.a): When recursing, pass down ${FLAGS_TO_PASS}. And
- don't echo the make command. This is closer to what the other
- recursions do.
- (HFILES_NO_SRCDIR): add hpread.h
- (COMMON_OBS): add hp-psymtab-read.o, hp-symtab-read.o
- (SFILES): add hp-psymtab-read.c, hp-symtab-read.c add rules for
- the new files. Remove hpread.c, hpread.o
- (gdb$(EXEEXT)): Depend on the actual tui library, not on a
- fictitious target. Since the fictitious target never existed,
- make would always relink.
- (tui/libtui.a): Always recurse to make sure the library is up to
- date.
-
-Wed Jan 6 12:05:12 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c: Pacify --enable-build-warnings, reformat code
- to conform to standards, fix spelling errors.
- (ishex, stubhex, record_currthread, etc): Declare.
- (ishex, stubhex): Declare char arg as int.
- (pack_string): Comment out, never used but possibly useful.
- (threadref_to_int, remote_get_threadinfo, etc): Make static.
-
-Wed Jan 6 11:43:32 1999 David Taylor <taylor@texas.cygnus.com>
-
- The following changes were made by Elena Zannoni
- <ezannoni@cygnus.com> and Edith Epstein <eepstein@cygnus.com> as
- part of a project to merge in changes made by HP.
-
- * c-exp.y: use external flag hp_som_som_object_present to decide
- whether code was compiled by HP's compilers. Add two new C++
- tokens for true and false.
- (yylex): check for template name is done differently for the
- HP/aCC compiler case. Change some of the template processing code
- for handling HP aCC templates. Handle true and false tokens.
-
-Tue Jan 5 11:13:36 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (record_curthread): Must not modify inferior_pid when
- called from wait_for_inferior. Instead, if a new thread-id is
- detected, call add_thread.
- (MAGIC_NULL_PID): new macro, use instead of the magic number
- "42000".
- (remote_find_new_threads): if inferior_pid is unknown, get and use
- the current thread id.
- (remote_start_remote): on connecting, attempt to get the current
- thread id for inferior_pid.
- (remote_resume): If pid == -1, then resume any-thread (not the
- current thread specifically). Also some cosmetic fixups.
-
- * thread.c (info_threads_command): don't initialize current_pid
- until after call to FIND_NEW_THREADS (which may change inferior_pid).
- Also some cosmetic fixups.
- * infrun.c: cosmetic fixups and casts to avoid warnings.
- * infcmd.c: cosmetic fixups, mainly long lines.
-
-Tue Jan 5 11:55:57 1999 David Taylor <taylor@texas.cygnus.com>
-
- * target.c (noprocess): terminate sentence with a period.
- * breakpoint.c (catch_command_1): ditto.
-
- * c-valprint.c (c_value_print): remove hack^2 from HP; it causes
- testsuite losses with no real gain.
-
- * inferior.h (START_INFERIOR_TRAPS_EXPECTED): restore, but only
- if tm-*.h hasn't overridden default value.
-
-1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Fix whitespace indentation for --help.
- * configure: Regenerated.
-
-1999-01-04 Manuel Bouyer <bouyer@antioche.lip6.fr>
-
- * main.c: Add --write command line option, document -w.
- * gdb.1: Document --write.
-
-1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Require autoconf 2.12.1 or higher.
- * doc/configure.in: Ditto.
- * nlm/configure.in: Ditto.
- * rdi-share/configure.in: Ditto.
- * testsuite/configure.in: Ditto.
- * doc/Makefile.in: Don't hardcode $(SHELL).
- * nlm/Makefile.in: Ditto.
- * rdi-share/Makefile.in: Ditto.
- * testsuite/Makefile.in: Ditto.
-
-Mon Jan 4 12:53:03 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-vx.c (init_vx_ops, init_vx_run_ops): Remove unneeded
- inits of new fields, including ref to bogus field.
- (vx_ops, vx_run_ops): Make static.
-
-Mon Jan 4 15:05:29 1999 David Taylor <taylor@texas.cygnus.com>
-
- * inferior.h (START_INFERIOR_TRAPS_EXPECTED): delete,
- already defined in tm.h.
-
- * inftarg.c: change <sys/unistd.h> to <unistd.h> and
- conditionalize its inclusion.
- * infttrace.c: ditto.
-
-For older changes see ChangeLog-98
+For older changes see ChangeLog-99
\f
Local Variables:
mode: change-log
projects / thirdparty / binutils-gdb.git / blobdiff