/* Common target dependent code for GDB on ARM systems.
- Copyright (C) 1988-2014 Free Software Foundation, Inc.
+ Copyright (C) 1988-2016 Free Software Foundation, Inc.
This file is part of GDB.
#include "user-regs.h"
#include "observer.h"
+#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
#include "arm-tdep.h"
#include "gdb/sim-arm.h"
#include "record.h"
#include "record-full.h"
+#include <algorithm>
-#include "features/arm-with-m.c"
-#include "features/arm-with-m-fpa-layout.c"
-#include "features/arm-with-m-vfp-d16.c"
-#include "features/arm-with-iwmmxt.c"
-#include "features/arm-with-vfpv2.c"
-#include "features/arm-with-vfpv3.c"
-#include "features/arm-with-neon.c"
+#include "features/arm/arm-with-m.c"
+#include "features/arm/arm-with-m-fpa-layout.c"
+#include "features/arm/arm-with-m-vfp-d16.c"
+#include "features/arm/arm-with-iwmmxt.c"
+#include "features/arm/arm-with-vfpv2.c"
+#include "features/arm/arm-with-vfpv3.c"
+#include "features/arm/arm-with-neon.c"
static int arm_debug;
struct regcache *regcache,
int regnum, const gdb_byte *buf);
-static int thumb_insn_size (unsigned short inst1);
+static CORE_ADDR
+ arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self);
+
+
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops arm_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb,
+ NULL,
+};
struct arm_prologue_cache
{
#define DISPLACED_STEPPING_ARCH_VERSION 5
-/* Addresses for calling Thumb functions have the bit 0 set.
- Here are some macros to test, set, or clear bit 0 of addresses. */
-#define IS_THUMB_ADDR(addr) ((addr) & 1)
-#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
-#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-
/* Set to true if the 32-bit mode is in use. */
int arm_apcs_32 = 1;
return CPSR_T;
}
+/* Determine if the processor is currently executing in Thumb mode. */
+
+int
+arm_is_thumb (struct regcache *regcache)
+{
+ ULONGEST cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_regcache_arch (regcache));
+
+ cpsr = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+
+ return (cpsr & t_bit) != 0;
+}
+
/* Determine if FRAME is executing in Thumb mode. */
int
0 };
unsigned int idx;
- data = objfile_data (sec->objfile, arm_objfile_data_key);
+ data = (struct arm_per_objfile *) objfile_data (sec->objfile,
+ arm_objfile_data_key);
if (data != NULL)
{
map = data->section_maps[sec->the_bfd_section->index];
return 0;
}
+/* Determine if the address specified equals any of these magic return
+ values, called EXC_RETURN, defined by the ARM v6-M and v7-M
+ architectures.
+
+ From ARMv6-M Reference Manual B1.5.8
+ Table B1-5 Exception return behavior
+
+ EXC_RETURN Return To Return Stack
+ 0xFFFFFFF1 Handler mode Main
+ 0xFFFFFFF9 Thread mode Main
+ 0xFFFFFFFD Thread mode Process
+
+ From ARMv7-M Reference Manual B1.5.8
+ Table B1-8 EXC_RETURN definition of exception return behavior, no FP
+
+ EXC_RETURN Return To Return Stack
+ 0xFFFFFFF1 Handler mode Main
+ 0xFFFFFFF9 Thread mode Main
+ 0xFFFFFFFD Thread mode Process
+
+ Table B1-9 EXC_RETURN definition of exception return behavior, with
+ FP
+
+ EXC_RETURN Return To Return Stack Frame Type
+ 0xFFFFFFE1 Handler mode Main Extended
+ 0xFFFFFFE9 Thread mode Main Extended
+ 0xFFFFFFED Thread mode Process Extended
+ 0xFFFFFFF1 Handler mode Main Basic
+ 0xFFFFFFF9 Thread mode Main Basic
+ 0xFFFFFFFD Thread mode Process Basic
+
+ For more details see "B1.5.8 Exception return behavior"
+ in both ARMv6-M and ARMv7-M Architecture Reference Manuals. */
+
+static int
+arm_m_addr_is_magic (CORE_ADDR addr)
+{
+ switch (addr)
+ {
+ /* Values from Tables in B1.5.8 the EXC_RETURN definitions of
+ the exception return behavior. */
+ case 0xffffffe1:
+ case 0xffffffe9:
+ case 0xffffffed:
+ case 0xfffffff1:
+ case 0xfffffff9:
+ case 0xfffffffd:
+ /* Address is magic. */
+ return 1;
+
+ default:
+ /* Address is not magic. */
+ return 0;
+ }
+}
+
/* Remove useless bits from addresses in a running program. */
static CORE_ADDR
arm_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR val)
/* On M-profile devices, do not strip the low bit from EXC_RETURN
(the magic exception return address). */
if (gdbarch_tdep (gdbarch)->is_m
- && (val & 0xfffffff0) == 0xfffffff0)
+ && arm_m_addr_is_magic (val))
return val;
if (arm_apcs_32)
/* On soft-float targets, __truncdfsf2 is called to convert promoted
arguments to their argument types in non-prototyped
functions. */
- if (strncmp (name, "__truncdfsf2", strlen ("__truncdfsf2")) == 0)
+ if (startswith (name, "__truncdfsf2"))
return 1;
- if (strncmp (name, "__aeabi_d2f", strlen ("__aeabi_d2f")) == 0)
+ if (startswith (name, "__aeabi_d2f"))
return 1;
/* Internal functions related to thread-local storage. */
- if (strncmp (name, "__tls_get_addr", strlen ("__tls_get_addr")) == 0)
+ if (startswith (name, "__tls_get_addr"))
return 1;
- if (strncmp (name, "__aeabi_read_tp", strlen ("__aeabi_read_tp")) == 0)
+ if (startswith (name, "__aeabi_read_tp"))
return 1;
}
else
return 0;
}
-/* Support routines for instruction parsing. */
-#define submask(x) ((1L << ((x) + 1)) - 1)
-#define bit(obj,st) (((obj) >> (st)) & 1)
-#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
-#define sbits(obj,st,fn) \
- ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
-#define BranchDest(addr,instr) \
- ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
-
/* Extract the immediate from instruction movw/movt of encoding T. INSN1 is
the first 16-bit of instruction, and INSN2 is the second 16-bit of
instruction. */
return (0x80 | (imm & 0x7f)) << (32 - count);
}
-/* Return 1 if the 16-bit Thumb instruction INST might change
- control flow, 0 otherwise. */
-
-static int
-thumb_instruction_changes_pc (unsigned short inst)
-{
- if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- return 1;
-
- if ((inst & 0xf000) == 0xd000) /* conditional branch */
- return 1;
-
- if ((inst & 0xf800) == 0xe000) /* unconditional branch */
- return 1;
-
- if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
- return 1;
-
- if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
- return 1;
-
- if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
- return 1;
-
- return 0;
-}
-
-/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
- might change control flow, 0 otherwise. */
-
-static int
-thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
-{
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- return 1;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- return 1;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
-
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (bit (inst2, 15))
- return 1;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (bit (inst2, 15))
- return 1;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- return 1;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- return 1;
- }
-
- if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- if (bits (inst1, 0, 3) == 15)
- return 1;
- if (bit (inst1, 7))
- return 1;
- if (bit (inst2, 11))
- return 1;
- if ((inst2 & 0x0fc0) == 0x0000)
- return 1;
-
- return 0;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- return 1;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- return 1;
- }
-
- return 0;
-}
-
/* Return 1 if the 16-bit Thumb instruction INSN restores SP in
epilogue, 0 otherwise. */
{
*destreg = bits (insn1, 8, 10);
*offset = 2;
- address = bits (insn1, 0, 7);
+ address = (pc & 0xfffffffc) + 4 + (bits (insn1, 0, 7) << 2);
+ address = read_memory_unsigned_integer (address, 4,
+ byte_order_for_code);
}
else if ((insn1 & 0xfbf0) == 0xf240) /* movw Rd, #const */
{
unsigned int insn
= read_memory_unsigned_integer (pc, 4, byte_order_for_code);
- if ((insn & 0x0e5f0000) == 0x041f0000) /* ldr Rd, #immed */
+ if ((insn & 0x0e5f0000) == 0x041f0000) /* ldr Rd, [PC, #immed] */
{
- address = bits (insn, 0, 11);
+ address = bits (insn, 0, 11) + pc + 8;
+ address = read_memory_unsigned_integer (address, 4,
+ byte_order_for_code);
+
*destreg = bits (insn, 12, 15);
*offset = 4;
}
return pc;
stack_chk_guard = lookup_minimal_symbol_by_pc (addr);
- /* If name of symbol doesn't start with '__stack_chk_guard', this
- instruction sequence is not for stack protector. If symbol is
- removed, we conservatively think this sequence is for stack protector. */
- if (stack_chk_guard.minsym
- && strncmp (MSYMBOL_LINKAGE_NAME (stack_chk_guard.minsym),
- "__stack_chk_guard",
- strlen ("__stack_chk_guard")) != 0)
+ /* ADDR must correspond to a symbol whose name is __stack_chk_guard.
+ Otherwise, this sequence cannot be for stack protector. */
+ if (stack_chk_guard.minsym == NULL
+ || !startswith (MSYMBOL_LINKAGE_NAME (stack_chk_guard.minsym), "__stack_chk_guard"))
return pc;
if (is_thumb)
static CORE_ADDR
arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long inst;
- CORE_ADDR skip_pc;
CORE_ADDR func_addr, limit_pc;
/* See if we can determine the end of the prologue via the symbol table.
{
CORE_ADDR post_prologue_pc
= skip_prologue_using_sal (gdbarch, func_addr);
- struct symtab *s = find_pc_symtab (func_addr);
+ struct compunit_symtab *cust = find_pc_compunit_symtab (func_addr);
if (post_prologue_pc)
post_prologue_pc
will have producer information for most binaries; if it is
missing (e.g. for -gstabs), assuming the GNU tools. */
if (post_prologue_pc
- && (s == NULL
- || s->producer == NULL
- || strncmp (s->producer, "GNU ", sizeof ("GNU ") - 1) == 0
- || strncmp (s->producer, "clang ", sizeof ("clang ") - 1) == 0))
+ && (cust == NULL
+ || COMPUNIT_PRODUCER (cust) == NULL
+ || startswith (COMPUNIT_PRODUCER (cust), "GNU ")
+ || startswith (COMPUNIT_PRODUCER (cust), "clang ")))
return post_prologue_pc;
if (post_prologue_pc != 0)
/* Check if this is Thumb code. */
if (arm_pc_is_thumb (gdbarch, pc))
return thumb_analyze_prologue (gdbarch, pc, limit_pc, NULL);
-
- for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
- {
- inst = read_memory_unsigned_integer (skip_pc, 4, byte_order_for_code);
-
- /* "mov ip, sp" is no longer a required part of the prologue. */
- if (inst == 0xe1a0c00d) /* mov ip, sp */
- continue;
-
- if ((inst & 0xfffff000) == 0xe28dc000) /* add ip, sp #n */
- continue;
-
- if ((inst & 0xfffff000) == 0xe24dc000) /* sub ip, sp #n */
- continue;
-
- /* Some prologues begin with "str lr, [sp, #-4]!". */
- if (inst == 0xe52de004) /* str lr, [sp, #-4]! */
- continue;
-
- if ((inst & 0xfffffff0) == 0xe92d0000) /* stmfd sp!,{a1,a2,a3,a4} */
- continue;
-
- if ((inst & 0xfffff800) == 0xe92dd800) /* stmfd sp!,{fp,ip,lr,pc} */
- continue;
-
- /* Any insns after this point may float into the code, if it makes
- for better instruction scheduling, so we skip them only if we
- find them, but still consider the function to be frame-ful. */
-
- /* We may have either one sfmfd instruction here, or several stfe
- insns, depending on the version of floating point code we
- support. */
- if ((inst & 0xffbf0fff) == 0xec2d0200) /* sfmfd fn, <cnt>, [sp]! */
- continue;
-
- if ((inst & 0xffff8fff) == 0xed6d0103) /* stfe fn, [sp, #-12]! */
- continue;
-
- if ((inst & 0xfffff000) == 0xe24cb000) /* sub fp, ip, #nn */
- continue;
-
- if ((inst & 0xfffff000) == 0xe24dd000) /* sub sp, sp, #nn */
- continue;
-
- if ((inst & 0xffffc000) == 0xe54b0000 /* strb r(0123),[r11,#-nn] */
- || (inst & 0xffffc0f0) == 0xe14b00b0 /* strh r(0123),[r11,#-nn] */
- || (inst & 0xffffc000) == 0xe50b0000) /* str r(0123),[r11,#-nn] */
- continue;
-
- if ((inst & 0xffffc000) == 0xe5cd0000 /* strb r(0123),[sp,#nn] */
- || (inst & 0xffffc0f0) == 0xe1cd00b0 /* strh r(0123),[sp,#nn] */
- || (inst & 0xffffc000) == 0xe58d0000) /* str r(0123),[sp,#nn] */
- continue;
-
- /* Un-recognized instruction; stop scanning. */
- break;
- }
-
- return skip_pc; /* End of prologue. */
+ else
+ return arm_analyze_prologue (gdbarch, pc, limit_pc, NULL);
}
/* *INDENT-OFF* */
function is. */
return;
- prologue_end = min (prologue_end, prev_pc);
+ prologue_end = std::min (prologue_end, prev_pc);
thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
-/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
+/* Return 1 if the ARM instruction INSN restores SP in epilogue, 0
+ otherwise. */
static int
-arm_instruction_changes_pc (uint32_t this_instr)
+arm_instruction_restores_sp (unsigned int insn)
{
- if (bits (this_instr, 28, 31) == INST_NV)
- /* Unconditional instructions. */
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- /* Branch with Link and change to Thumb. */
- return 1;
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- return 0;
- default:
- return 0;
- }
- else
- switch (bits (this_instr, 25, 27))
- {
- case 0x0:
- if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
- {
- /* Multiplies and extra load/stores. */
- if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
- /* Neither multiplies nor extension load/stores are allowed
- to modify PC. */
- return 0;
-
- /* Otherwise, miscellaneous instructions. */
-
- /* BX <reg>, BXJ <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff2
- || bits (this_instr, 4, 27) == 0x12fff3)
- return 1;
-
- /* Other miscellaneous instructions are unpredictable if they
- modify PC. */
- return 0;
- }
- /* Data processing instruction. Fall through. */
-
- case 0x1:
- if (bits (this_instr, 12, 15) == 15)
- return 1;
- else
- return 0;
-
- case 0x2:
- case 0x3:
- /* Media instructions and architecturally undefined instructions. */
- if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
- return 0;
-
- /* Stores. */
- if (bit (this_instr, 20) == 0)
- return 0;
-
- /* Loads. */
- if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
- return 1;
- else
- return 0;
-
- case 0x4:
- /* Load/store multiple. */
- if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
- return 1;
- else
- return 0;
-
- case 0x5:
- /* Branch and branch with link. */
+ if (bits (insn, 28, 31) != INST_NV)
+ {
+ if ((insn & 0x0df0f000) == 0x0080d000
+ /* ADD SP (register or immediate). */
+ || (insn & 0x0df0f000) == 0x0040d000
+ /* SUB SP (register or immediate). */
+ || (insn & 0x0ffffff0) == 0x01a0d000
+ /* MOV SP. */
+ || (insn & 0x0fff0000) == 0x08bd0000
+ /* POP (LDMIA). */
+ || (insn & 0x0fff0000) == 0x049d0000)
+ /* POP of a single register. */
return 1;
+ }
- case 0x6:
- case 0x7:
- /* Coprocessor transfers or SWIs can not affect PC. */
- return 0;
-
- default:
- internal_error (__FILE__, __LINE__, _("bad value in switch"));
- }
+ return 0;
}
/* Analyze an ARM mode prologue starting at PROLOGUE_START and
CORE_ADDR prologue_start, CORE_ADDR prologue_end,
struct arm_prologue_cache *cache)
{
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
int regno;
CORE_ADDR offset, current_pc;
pv_t regs[ARM_FPS_REGNUM];
struct pv_area *stack;
struct cleanup *back_to;
- int framereg, framesize;
CORE_ADDR unrecognized_pc = 0;
/* Search the prologue looking for instructions that set up the
else if (arm_instruction_changes_pc (insn))
/* Don't scan past anything that might change control flow. */
break;
+ else if (arm_instruction_restores_sp (insn))
+ {
+ /* Don't scan past the epilogue. */
+ break;
+ }
else if ((insn & 0xfe500000) == 0xe8100000 /* ldm */
&& pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
/* Ignore block loads from the stack, potentially copying
continue;
else
{
- /* The optimizer might shove anything into the prologue,
- so we just skip what we don't recognize. */
+ /* The optimizer might shove anything into the prologue, if
+ we build up cache (cache != NULL) from scanning prologue,
+ we just skip what we don't recognize and scan further to
+ make cache as complete as possible. However, if we skip
+ prologue, we'll stop immediately on unrecognized
+ instruction. */
unrecognized_pc = current_pc;
- continue;
+ if (cache != NULL)
+ continue;
+ else
+ break;
}
}
if (unrecognized_pc == 0)
unrecognized_pc = current_pc;
- /* The frame size is just the distance from the frame register
- to the original stack pointer. */
- if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM))
- {
- /* Frame pointer is fp. */
- framereg = ARM_FP_REGNUM;
- framesize = -regs[ARM_FP_REGNUM].k;
- }
- else
- {
- /* Try the stack pointer... this is a bit desperate. */
- framereg = ARM_SP_REGNUM;
- framesize = -regs[ARM_SP_REGNUM].k;
- }
-
if (cache)
{
+ int framereg, framesize;
+
+ /* The frame size is just the distance from the frame register
+ to the original stack pointer. */
+ if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Frame pointer is fp. */
+ framereg = ARM_FP_REGNUM;
+ framesize = -regs[ARM_FP_REGNUM].k;
+ }
+ else
+ {
+ /* Try the stack pointer... this is a bit desperate. */
+ framereg = ARM_SP_REGNUM;
+ framesize = -regs[ARM_SP_REGNUM].k;
+ }
+
cache->framereg = framereg;
cache->framesize = framesize;
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- int regno;
- CORE_ADDR prologue_start, prologue_end, current_pc;
+ CORE_ADDR prologue_start, prologue_end;
CORE_ADDR prev_pc = get_frame_pc (this_frame);
CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
- pv_t regs[ARM_FPS_REGNUM];
- struct pv_area *stack;
- struct cleanup *back_to;
- CORE_ADDR offset;
/* Assume there is no frame until proven otherwise. */
cache->framereg = ARM_SP_REGNUM;
return cache;
}
+/* Implementation of the stop_reason hook for arm_prologue frames. */
+
+static enum unwind_stop_reason
+arm_prologue_unwind_stop_reason (struct frame_info *this_frame,
+ void **this_cache)
+{
+ struct arm_prologue_cache *cache;
+ CORE_ADDR pc;
+
+ if (*this_cache == NULL)
+ *this_cache = arm_make_prologue_cache (this_frame);
+ cache = (struct arm_prologue_cache *) *this_cache;
+
+ /* This is meant to halt the backtrace at "_start". */
+ pc = get_frame_pc (this_frame);
+ if (pc <= gdbarch_tdep (get_frame_arch (this_frame))->lowest_pc)
+ return UNWIND_OUTERMOST;
+
+ /* If we've hit a wall, stop. */
+ if (cache->prev_sp == 0)
+ return UNWIND_OUTERMOST;
+
+ return UNWIND_NO_REASON;
+}
+
/* Our frame ID for a normal frame is the current function's starting PC
and the caller's SP when we were called. */
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
-
- /* This is meant to halt the backtrace at "_start". */
- pc = get_frame_pc (this_frame);
- if (pc <= gdbarch_tdep (get_frame_arch (this_frame))->lowest_pc)
- return;
-
- /* If we've hit a wall, stop. */
- if (cache->prev_sp == 0)
- return;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* Use function start address as part of the frame ID. If we cannot
identify the start address (due to missing symbol information),
fall back to just using the current PC. */
+ pc = get_frame_pc (this_frame);
func = get_frame_func (this_frame);
if (!func)
func = pc;
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* If we are asked to unwind the PC, then we need to return the LR
instead. The prologue may save PC, but it will point into this
struct frame_unwind arm_prologue_unwind = {
NORMAL_FRAME,
- default_frame_unwind_stop_reason,
+ arm_prologue_unwind_stop_reason,
arm_prologue_this_id,
arm_prologue_prev_register,
NULL,
static void
arm_exidx_data_free (struct objfile *objfile, void *arg)
{
- struct arm_exidx_data *data = arg;
+ struct arm_exidx_data *data = (struct arm_exidx_data *) arg;
unsigned int i;
for (i = 0; i < objfile->obfd->section_count; i++)
cleanups = make_cleanup (null_cleanup, NULL);
/* Read contents of exception table and index. */
- exidx = bfd_get_section_by_name (objfile->obfd, ".ARM.exidx");
+ exidx = bfd_get_section_by_name (objfile->obfd, ELF_STRING_ARM_unwind);
if (exidx)
{
exidx_vma = bfd_section_vma (objfile->obfd, exidx);
exidx_size = bfd_get_section_size (exidx);
- exidx_data = xmalloc (exidx_size);
+ exidx_data = (gdb_byte *) xmalloc (exidx_size);
make_cleanup (xfree, exidx_data);
if (!bfd_get_section_contents (objfile->obfd, exidx,
{
extab_vma = bfd_section_vma (objfile->obfd, extab);
extab_size = bfd_get_section_size (extab);
- extab_data = xmalloc (extab_size);
+ extab_data = (gdb_byte *) xmalloc (extab_size);
make_cleanup (xfree, extab_data);
if (!bfd_get_section_contents (objfile->obfd, extab,
extab section starting at ADDR. */
if (n_bytes || n_words)
{
- gdb_byte *p = entry = obstack_alloc (&objfile->objfile_obstack,
- n_bytes + n_words * 4 + 1);
+ gdb_byte *p = entry
+ = (gdb_byte *) obstack_alloc (&objfile->objfile_obstack,
+ n_bytes + n_words * 4 + 1);
while (n_bytes--)
*p++ = (gdb_byte) ((word >> (8 * n_bytes)) & 0xff);
struct arm_exidx_entry map_key = { memaddr - obj_section_addr (sec), 0 };
unsigned int idx;
- data = objfile_data (sec->objfile, arm_exidx_data_key);
+ data = ((struct arm_exidx_data *)
+ objfile_data (sec->objfile, arm_exidx_data_key));
if (data != NULL)
{
map = data->section_maps[sec->the_bfd_section->index];
arm_exidx_unwind_sniffer
};
-/* Recognize GCC's trampoline for thumb call-indirect. If we are in a
- trampoline, return the target PC. Otherwise return 0.
-
- void call0a (char c, short s, int i, long l) {}
+static struct arm_prologue_cache *
+arm_make_epilogue_frame_cache (struct frame_info *this_frame)
+{
+ struct arm_prologue_cache *cache;
+ int reg;
- int main (void)
- {
- (*pointer_to_call0a) (c, s, i, l);
- }
+ cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- Instead of calling a stub library function _call_via_xx (xx is
- the register name), GCC may inline the trampoline in the object
- file as below (register r2 has the address of call0a).
+ /* Still rely on the offset calculated from prologue. */
+ arm_scan_prologue (this_frame, cache);
- .global main
- .type main, %function
- ...
- bl .L1
- ...
- .size main, .-main
+ /* Since we are in epilogue, the SP has been restored. */
+ cache->prev_sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
+
+ /* Calculate actual addresses of saved registers using offsets
+ determined by arm_scan_prologue. */
+ for (reg = 0; reg < gdbarch_num_regs (get_frame_arch (this_frame)); reg++)
+ if (trad_frame_addr_p (cache->saved_regs, reg))
+ cache->saved_regs[reg].addr += cache->prev_sp;
+
+ return cache;
+}
+
+/* Implementation of function hook 'this_id' in
+ 'struct frame_uwnind' for epilogue unwinder. */
+
+static void
+arm_epilogue_frame_this_id (struct frame_info *this_frame,
+ void **this_cache,
+ struct frame_id *this_id)
+{
+ struct arm_prologue_cache *cache;
+ CORE_ADDR pc, func;
+
+ if (*this_cache == NULL)
+ *this_cache = arm_make_epilogue_frame_cache (this_frame);
+ cache = (struct arm_prologue_cache *) *this_cache;
+
+ /* Use function start address as part of the frame ID. If we cannot
+ identify the start address (due to missing symbol information),
+ fall back to just using the current PC. */
+ pc = get_frame_pc (this_frame);
+ func = get_frame_func (this_frame);
+ if (func == 0)
+ func = pc;
+
+ (*this_id) = frame_id_build (cache->prev_sp, pc);
+}
+
+/* Implementation of function hook 'prev_register' in
+ 'struct frame_uwnind' for epilogue unwinder. */
+
+static struct value *
+arm_epilogue_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ if (*this_cache == NULL)
+ *this_cache = arm_make_epilogue_frame_cache (this_frame);
+
+ return arm_prologue_prev_register (this_frame, this_cache, regnum);
+}
+
+static int arm_stack_frame_destroyed_p_1 (struct gdbarch *gdbarch,
+ CORE_ADDR pc);
+static int thumb_stack_frame_destroyed_p (struct gdbarch *gdbarch,
+ CORE_ADDR pc);
+
+/* Implementation of function hook 'sniffer' in
+ 'struct frame_uwnind' for epilogue unwinder. */
+
+static int
+arm_epilogue_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_prologue_cache)
+{
+ if (frame_relative_level (this_frame) == 0)
+ {
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ CORE_ADDR pc = get_frame_pc (this_frame);
+
+ if (arm_frame_is_thumb (this_frame))
+ return thumb_stack_frame_destroyed_p (gdbarch, pc);
+ else
+ return arm_stack_frame_destroyed_p_1 (gdbarch, pc);
+ }
+ else
+ return 0;
+}
+
+/* Frame unwinder from epilogue. */
+
+static const struct frame_unwind arm_epilogue_frame_unwind =
+{
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ arm_epilogue_frame_this_id,
+ arm_epilogue_frame_prev_register,
+ NULL,
+ arm_epilogue_frame_sniffer,
+};
+
+/* Recognize GCC's trampoline for thumb call-indirect. If we are in a
+ trampoline, return the target PC. Otherwise return 0.
+
+ void call0a (char c, short s, int i, long l) {}
+
+ int main (void)
+ {
+ (*pointer_to_call0a) (c, s, i, l);
+ }
+
+ Instead of calling a stub library function _call_via_xx (xx is
+ the register name), GCC may inline the trampoline in the object
+ file as below (register r2 has the address of call0a).
+
+ .global main
+ .type main, %function
+ ...
+ bl .L1
+ ...
+ .size main, .-main
.L1:
bx r2
if (*this_cache == NULL)
*this_cache = arm_make_stub_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
*this_id = frame_id_build (cache->prev_sp, get_frame_pc (this_frame));
}
if (*this_cache == NULL)
*this_cache = arm_m_exception_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* Our frame ID for a stub frame is the current SP and LR. */
*this_id = frame_id_build (cache->prev_sp,
void **this_cache,
int prev_regnum)
{
- struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct arm_prologue_cache *cache;
if (*this_cache == NULL)
*this_cache = arm_m_exception_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
/* The value was already reconstructed into PREV_SP. */
if (prev_regnum == ARM_SP_REGNUM)
/* No need to check is_m; this sniffer is only registered for
M-profile architectures. */
- /* Exception frames return to one of these magic PCs. Other values
- are not defined as of v7-M. See details in "B1.5.8 Exception
- return behavior" in "ARMv7-M Architecture Reference Manual". */
- if (this_pc == 0xfffffff1 || this_pc == 0xfffffff9
- || this_pc == 0xfffffffd)
- return 1;
-
- return 0;
+ /* Check if exception frame returns to a magic PC value. */
+ return arm_m_addr_is_magic (this_pc);
}
/* Frame unwinder for M-profile exceptions. */
if (*this_cache == NULL)
*this_cache = arm_make_prologue_cache (this_frame);
- cache = *this_cache;
+ cache = (struct arm_prologue_cache *) *this_cache;
return cache->prev_sp - cache->framesize;
}
}
}
-/* Return true if we are in the function's epilogue, i.e. after the
- instruction that destroyed the function's stack frame. */
+/* Implement the stack_frame_destroyed_p gdbarch method. */
static int
-thumb_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+thumb_stack_frame_destroyed_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned int insn, insn2;
found_return = 1;
else if (thumb_instruction_restores_sp (insn))
{
- if ((insn & 0xfe00) == 0xbd00) /* pop <registers, PC> */
+ if ((insn & 0xff00) == 0xbd00) /* pop <registers, PC> */
found_return = 1;
}
else if (thumb_insn_size (insn) == 4) /* 32-bit Thumb-2 instruction */
return found_stack_adjust;
}
-/* Return true if we are in the function's epilogue, i.e. after the
- instruction that destroyed the function's stack frame. */
-
static int
-arm_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+arm_stack_frame_destroyed_p_1 (struct gdbarch *gdbarch, CORE_ADDR pc)
{
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned int insn;
- int found_return, found_stack_adjust;
+ int found_return;
CORE_ADDR func_start, func_end;
- if (arm_pc_is_thumb (gdbarch, pc))
- return thumb_in_function_epilogue_p (gdbarch, pc);
-
if (!find_pc_partial_function (pc, NULL, &func_start, &func_end))
return 0;
if (pc < func_start + 4)
return 0;
- found_stack_adjust = 0;
insn = read_memory_unsigned_integer (pc - 4, 4, byte_order_for_code);
- if (bits (insn, 28, 31) != INST_NV)
- {
- if ((insn & 0x0df0f000) == 0x0080d000)
- /* ADD SP (register or immediate). */
- found_stack_adjust = 1;
- else if ((insn & 0x0df0f000) == 0x0040d000)
- /* SUB SP (register or immediate). */
- found_stack_adjust = 1;
- else if ((insn & 0x0ffffff0) == 0x01a0d000)
- /* MOV SP. */
- found_stack_adjust = 1;
- else if ((insn & 0x0fff0000) == 0x08bd0000)
- /* POP (LDMIA). */
- found_stack_adjust = 1;
- else if ((insn & 0x0fff0000) == 0x049d0000)
- /* POP of a single register. */
- found_stack_adjust = 1;
- }
-
- if (found_stack_adjust)
+ if (arm_instruction_restores_sp (insn))
return 1;
return 0;
}
+/* Implement the stack_frame_destroyed_p gdbarch method. */
+
+static int
+arm_stack_frame_destroyed_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ if (arm_pc_is_thumb (gdbarch, pc))
+ return thumb_stack_frame_destroyed_p (gdbarch, pc);
+ else
+ return arm_stack_frame_destroyed_p_1 (gdbarch, pc);
+}
/* When arguments must be pushed onto the stack, they go on in reverse
order. The code below implements a FILO (stack) to do this. */
{
int len;
struct stack_item *prev;
- void *data;
+ gdb_byte *data;
};
static struct stack_item *
-push_stack_item (struct stack_item *prev, const void *contents, int len)
+push_stack_item (struct stack_item *prev, const gdb_byte *contents, int len)
{
struct stack_item *si;
- si = xmalloc (sizeof (struct stack_item));
- si->data = xmalloc (len);
+ si = XNEW (struct stack_item);
+ si->data = (gdb_byte *) xmalloc (len);
si->len = len;
si->prev = prev;
memcpy (si->data, contents, len);
return TYPE_LENGTH (t);
case TYPE_CODE_ARRAY:
+ if (TYPE_VECTOR (t))
+ {
+ /* Use the natural alignment for vector types (the same for
+ scalar type), but the maximum alignment is 64-bit. */
+ if (TYPE_LENGTH (t) > 8)
+ return 8;
+ else
+ return TYPE_LENGTH (t);
+ }
+ else
+ return arm_type_align (TYPE_TARGET_TYPE (t));
case TYPE_CODE_COMPLEX:
- /* TODO: What about vector types? */
return arm_type_align (TYPE_TARGET_TYPE (t));
case TYPE_CODE_STRUCT:
case TYPE_CODE_ARRAY:
{
- int count;
- unsigned unitlen;
- count = arm_vfp_cprc_sub_candidate (TYPE_TARGET_TYPE (t), base_type);
- if (count == -1)
- return -1;
- if (TYPE_LENGTH (t) == 0)
+ if (TYPE_VECTOR (t))
{
- gdb_assert (count == 0);
- return 0;
+ /* A 64-bit or 128-bit containerized vector type are VFP
+ CPRCs. */
+ switch (TYPE_LENGTH (t))
+ {
+ case 8:
+ if (*base_type == VFP_CPRC_UNKNOWN)
+ *base_type = VFP_CPRC_VEC64;
+ return 1;
+ case 16:
+ if (*base_type == VFP_CPRC_UNKNOWN)
+ *base_type = VFP_CPRC_VEC128;
+ return 1;
+ default:
+ return -1;
+ }
+ }
+ else
+ {
+ int count;
+ unsigned unitlen;
+
+ count = arm_vfp_cprc_sub_candidate (TYPE_TARGET_TYPE (t),
+ base_type);
+ if (count == -1)
+ return -1;
+ if (TYPE_LENGTH (t) == 0)
+ {
+ gdb_assert (count == 0);
+ return 0;
+ }
+ else if (count == 0)
+ return -1;
+ unitlen = arm_vfp_cprc_unit_length (*base_type);
+ gdb_assert ((TYPE_LENGTH (t) % unitlen) == 0);
+ return TYPE_LENGTH (t) / unitlen;
}
- else if (count == 0)
- return -1;
- unitlen = arm_vfp_cprc_unit_length (*base_type);
- gdb_assert ((TYPE_LENGTH (t) % unitlen) == 0);
- return TYPE_LENGTH (t) / unitlen;
}
break;
int i;
for (i = 0; i < TYPE_NFIELDS (t); i++)
{
- int sub_count = arm_vfp_cprc_sub_candidate (TYPE_FIELD_TYPE (t, i),
- base_type);
+ int sub_count = 0;
+
+ if (!field_is_static (&TYPE_FIELD (t, i)))
+ sub_count = arm_vfp_cprc_sub_candidate (TYPE_FIELD_TYPE (t, i),
+ base_type);
if (sub_count == -1)
return -1;
count += sub_count;
CORE_ADDR regval = extract_unsigned_integer (val, len, byte_order);
if (arm_pc_is_thumb (gdbarch, regval))
{
- bfd_byte *copy = alloca (len);
+ bfd_byte *copy = (bfd_byte *) alloca (len);
store_unsigned_integer (copy, len, byte_order,
MAKE_THUMB_ADDR (regval));
val = copy;
while (len > 0)
{
int partial_len = len < INT_REGISTER_SIZE ? len : INT_REGISTER_SIZE;
+ CORE_ADDR regval
+ = extract_unsigned_integer (val, partial_len, byte_order);
if (may_use_core_reg && argreg <= ARM_LAST_ARG_REGNUM)
{
/* The argument is being passed in a general purpose
register. */
- CORE_ADDR regval
- = extract_unsigned_integer (val, partial_len, byte_order);
if (byte_order == BFD_ENDIAN_BIG)
regval <<= (INT_REGISTER_SIZE - partial_len) * 8;
if (arm_debug)
}
else
{
+ gdb_byte buf[INT_REGISTER_SIZE];
+
+ memset (buf, 0, sizeof (buf));
+ store_unsigned_integer (buf, partial_len, byte_order, regval);
+
/* Push the arguments onto the stack. */
if (arm_debug)
fprintf_unfiltered (gdb_stdlog, "arg %d @ sp + %d\n",
argnum, nstack);
- si = push_stack_item (si, val, INT_REGISTER_SIZE);
+ si = push_stack_item (si, buf, INT_REGISTER_SIZE);
nstack += INT_REGISTER_SIZE;
}
&d, dbl);
}
-static int
-condition_true (unsigned long cond, unsigned long status_reg)
-{
- if (cond == INST_AL || cond == INST_NV)
- return 1;
-
- switch (cond)
- {
- case INST_EQ:
- return ((status_reg & FLAG_Z) != 0);
- case INST_NE:
- return ((status_reg & FLAG_Z) == 0);
- case INST_CS:
- return ((status_reg & FLAG_C) != 0);
- case INST_CC:
- return ((status_reg & FLAG_C) == 0);
- case INST_MI:
- return ((status_reg & FLAG_N) != 0);
- case INST_PL:
- return ((status_reg & FLAG_N) == 0);
- case INST_VS:
- return ((status_reg & FLAG_V) != 0);
- case INST_VC:
- return ((status_reg & FLAG_V) == 0);
- case INST_HI:
- return ((status_reg & (FLAG_C | FLAG_Z)) == FLAG_C);
- case INST_LS:
- return ((status_reg & (FLAG_C | FLAG_Z)) != FLAG_C);
- case INST_GE:
- return (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0));
- case INST_LT:
- return (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0));
- case INST_GT:
- return (((status_reg & FLAG_Z) == 0)
- && (((status_reg & FLAG_N) == 0)
- == ((status_reg & FLAG_V) == 0)));
- case INST_LE:
- return (((status_reg & FLAG_Z) != 0)
- || (((status_reg & FLAG_N) == 0)
- != ((status_reg & FLAG_V) == 0)));
- }
- return 1;
-}
+/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
+ of the appropriate mode (as encoded in the PC value), even if this
+ differs from what would be expected according to the symbol tables. */
-static unsigned long
-shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
- unsigned long pc_val, unsigned long status_reg)
+void
+arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
+ struct address_space *aspace,
+ CORE_ADDR pc)
{
- unsigned long res, shift;
- int rm = bits (inst, 0, 3);
- unsigned long shifttype = bits (inst, 5, 6);
+ struct cleanup *old_chain
+ = make_cleanup_restore_integer (&arm_override_mode);
- if (bit (inst, 4))
- {
- int rs = bits (inst, 8, 11);
- shift = (rs == 15 ? pc_val + 8
- : get_frame_register_unsigned (frame, rs)) & 0xFF;
- }
- else
- shift = bits (inst, 7, 11);
+ arm_override_mode = IS_THUMB_ADDR (pc);
+ pc = gdbarch_addr_bits_remove (gdbarch, pc);
- res = (rm == ARM_PC_REGNUM
- ? (pc_val + (bit (inst, 4) ? 12 : 8))
- : get_frame_register_unsigned (frame, rm));
+ insert_single_step_breakpoint (gdbarch, aspace, pc);
- switch (shifttype)
- {
- case 0: /* LSL */
- res = shift >= 32 ? 0 : res << shift;
- break;
+ do_cleanups (old_chain);
+}
- case 1: /* LSR */
- res = shift >= 32 ? 0 : res >> shift;
- break;
+/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
+ the buffer to be NEW_LEN bytes ending at ENDADDR. Return
+ NULL if an error occurs. BUF is freed. */
- case 2: /* ASR */
- if (shift >= 32)
- shift = 31;
- res = ((res & 0x80000000L)
- ? ~((~res) >> shift) : res >> shift);
- break;
+static gdb_byte *
+extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
+ int old_len, int new_len)
+{
+ gdb_byte *new_buf;
+ int bytes_to_read = new_len - old_len;
- case 3: /* ROR/RRX */
- shift &= 31;
- if (shift == 0)
- res = (res >> 1) | (carry ? 0x80000000L : 0);
- else
- res = (res >> shift) | (res << (32 - shift));
- break;
+ new_buf = (gdb_byte *) xmalloc (new_len);
+ memcpy (new_buf + bytes_to_read, buf, old_len);
+ xfree (buf);
+ if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
+ {
+ xfree (new_buf);
+ return NULL;
}
-
- return res & 0xffffffff;
+ return new_buf;
}
-/* Return number of 1-bits in VAL. */
+/* An IT block is at most the 2-byte IT instruction followed by
+ four 4-byte instructions. The furthest back we must search to
+ find an IT block that affects the current instruction is thus
+ 2 + 3 * 4 == 14 bytes. */
+#define MAX_IT_BLOCK_PREFIX 14
-static int
-bitcount (unsigned long val)
+/* Use a quick scan if there are more than this many bytes of
+ code. */
+#define IT_SCAN_THRESHOLD 32
+
+/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
+ A breakpoint in an IT block may not be hit, depending on the
+ condition flags. */
+static CORE_ADDR
+arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
{
- int nbits;
- for (nbits = 0; val != 0; nbits++)
- val &= val - 1; /* Delete rightmost 1-bit in val. */
- return nbits;
-}
+ gdb_byte *buf;
+ char map_type;
+ CORE_ADDR boundary, func_start;
+ int buf_len;
+ enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
+ int i, any, last_it, last_it_count;
-/* Return the size in bytes of the complete Thumb instruction whose
- first halfword is INST1. */
+ /* If we are using BKPT breakpoints, none of this is necessary. */
+ if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
+ return bpaddr;
-static int
-thumb_insn_size (unsigned short inst1)
-{
- if ((inst1 & 0xe000) == 0xe000 && (inst1 & 0x1800) != 0)
- return 4;
- else
- return 2;
-}
+ /* ARM mode does not have this problem. */
+ if (!arm_pc_is_thumb (gdbarch, bpaddr))
+ return bpaddr;
-static int
-thumb_advance_itstate (unsigned int itstate)
-{
- /* Preserve IT[7:5], the first three bits of the condition. Shift
- the upcoming condition flags left by one bit. */
- itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
+ /* We are setting a breakpoint in Thumb code that could potentially
+ contain an IT block. The first step is to find how much Thumb
+ code there is; we do not need to read outside of known Thumb
+ sequences. */
+ map_type = arm_find_mapping_symbol (bpaddr, &boundary);
+ if (map_type == 0)
+ /* Thumb-2 code must have mapping symbols to have a chance. */
+ return bpaddr;
- /* If we have finished the IT block, clear the state. */
- if ((itstate & 0x0f) == 0)
- itstate = 0;
+ bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
- return itstate;
-}
+ if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
+ && func_start > boundary)
+ boundary = func_start;
-/* Find the next PC after the current instruction executes. In some
- cases we can not statically determine the answer (see the IT state
- handling in this function); in that case, a breakpoint may be
- inserted in addition to the returned PC, which will be used to set
- another breakpoint by our caller. */
+ /* Search for a candidate IT instruction. We have to do some fancy
+ footwork to distinguish a real IT instruction from the second
+ half of a 32-bit instruction, but there is no need for that if
+ there's no candidate. */
+ buf_len = std::min (bpaddr - boundary, (CORE_ADDR) MAX_IT_BLOCK_PREFIX);
+ if (buf_len == 0)
+ /* No room for an IT instruction. */
+ return bpaddr;
-static CORE_ADDR
-thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
- unsigned short inst1;
- CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
- unsigned long offset;
- ULONGEST status, itstate;
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- pc_val = MAKE_THUMB_ADDR (pc_val);
-
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
-
- /* Thumb-2 conditional execution support. There are eight bits in
- the CPSR which describe conditional execution state. Once
- reconstructed (they're in a funny order), the low five bits
- describe the low bit of the condition for each instruction and
- how many instructions remain. The high three bits describe the
- base condition. One of the low four bits will be set if an IT
- block is active. These bits read as zero on earlier
- processors. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
-
- /* If-Then handling. On GNU/Linux, where this routine is used, we
- use an undefined instruction as a breakpoint. Unlike BKPT, IT
- can disable execution of the undefined instruction. So we might
- miss the breakpoint if we set it on a skipped conditional
- instruction. Because conditional instructions can change the
- flags, affecting the execution of further instructions, we may
- need to set two breakpoints. */
-
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint != NULL)
+ buf = (gdb_byte *) xmalloc (buf_len);
+ if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
+ return bpaddr;
+ any = 0;
+ for (i = 0; i < buf_len; i += 2)
{
+ unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
{
- /* An IT instruction. Because this instruction does not
- modify the flags, we can accurately predict the next
- executed instruction. */
- itstate = inst1 & 0x00ff;
- pc += thumb_insn_size (inst1);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if (itstate != 0)
- {
- /* We are in a conditional block. Check the condition. */
- if (! condition_true (itstate >> 4, status))
- {
- /* Advance to the next executed instruction. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if ((itstate & 0x0f) == 0x08)
- {
- /* This is the last instruction of the conditional
- block, and it is executed. We can handle it normally
- because the following instruction is not conditional,
- and we must handle it normally because it is
- permitted to branch. Fall through. */
- }
- else
- {
- int cond_negated;
-
- /* There are conditional instructions after this one.
- If this instruction modifies the flags, then we can
- not predict what the next executed instruction will
- be. Fortunately, this instruction is architecturally
- forbidden to branch; we know it will fall through.
- Start by skipping past it. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- /* Set a breakpoint on the following instruction. */
- gdb_assert ((itstate & 0x0f) != 0);
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (pc));
- cond_negated = (itstate >> 4) & 1;
-
- /* Skip all following instructions with the same
- condition. If there is a later instruction in the IT
- block with the opposite condition, set the other
- breakpoint there. If not, then set a breakpoint on
- the instruction after the IT block. */
- do
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
- while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
-
- return MAKE_THUMB_ADDR (pc);
- }
+ any = 1;
+ break;
}
}
- else if (itstate & 0x0f)
- {
- /* We are in a conditional block. Check the condition. */
- int cond = itstate >> 4;
- if (! condition_true (cond, status))
- /* Advance to the next instruction. All the 32-bit
- instructions share a common prefix. */
- return MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1));
-
- /* Otherwise, handle the instruction normally. */
- }
-
- if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- {
- CORE_ADDR sp;
-
- /* Fetch the saved PC from the stack. It's stored above
- all of the other registers. */
- offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
- sp = get_frame_register_unsigned (frame, ARM_SP_REGNUM);
- nextpc = read_memory_unsigned_integer (sp + offset, 4, byte_order);
- }
- else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
- {
- unsigned long cond = bits (inst1, 8, 11);
- if (cond == 0x0f) /* 0x0f = SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
-
- }
- else if (cond != 0x0f && condition_true (cond, status))
- nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
- }
- else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
- {
- nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
- }
- else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
- {
- unsigned short inst2;
- inst2 = read_memory_unsigned_integer (pc + 2, 2, byte_order_for_code);
-
- /* Default to the next instruction. */
- nextpc = pc + 4;
- nextpc = MAKE_THUMB_ADDR (nextpc);
-
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- int j1, j2, imm1, imm2;
-
- imm1 = sbits (inst1, 0, 10);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = ((imm1 << 12) + (imm2 << 1));
- offset ^= ((!j2) << 22) | ((!j1) << 23);
-
- nextpc = pc_val + offset;
- /* For BLX make sure to clear the low bits. */
- if (bit (inst2, 12) == 0)
- nextpc = nextpc & 0xfffffffc;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- nextpc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
- nextpc -= inst2 & 0x00ff;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- if (condition_true (bits (inst1, 6, 9), status))
- {
- int sign, j1, j2, imm1, imm2;
-
- sign = sbits (inst1, 10, 10);
- imm1 = bits (inst1, 0, 5);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- nextpc = pc_val + offset;
- }
- }
- }
- else if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
- int rn, offset, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = bitcount (inst2) * 4 - 4;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = -4;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- offset = 0;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- offset = -8;
- }
- else
- load_pc = 0;
-
- if (load_pc)
- {
- CORE_ADDR addr = get_frame_register_unsigned (frame, rn);
- nextpc = get_frame_memory_unsigned (frame, addr + offset, 4);
- }
- }
- else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- nextpc = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- CORE_ADDR base;
- int rn, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- base = get_frame_register_unsigned (frame, rn);
- if (rn == ARM_PC_REGNUM)
- {
- base = (base + 4) & ~(CORE_ADDR) 0x3;
- if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else
- base -= bits (inst2, 0, 11);
- }
- else if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else if (bit (inst2, 11))
- {
- if (bit (inst2, 10))
- {
- if (bit (inst2, 9))
- base += bits (inst2, 0, 7);
- else
- base -= bits (inst2, 0, 7);
- }
- }
- else if ((inst2 & 0x0fc0) == 0x0000)
- {
- int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
- base += get_frame_register_unsigned (frame, rm) << shift;
- }
- else
- /* Reserved. */
- load_pc = 0;
-
- if (load_pc)
- nextpc = get_frame_memory_unsigned (frame, base, 4);
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = get_frame_register_unsigned (frame, tbl_reg);
-
- offset = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 1);
- nextpc = pc_val + length;
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = get_frame_register_unsigned (frame, tbl_reg);
-
- offset = 2 * get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 2);
- nextpc = pc_val + length;
- }
- }
- else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = UNMAKE_THUMB_ADDR (pc_val);
- else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
- }
- else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = pc_val;
- else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xf500) == 0xb100)
- {
- /* CBNZ or CBZ. */
- int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
- ULONGEST reg = get_frame_register_unsigned (frame, bits (inst1, 0, 2));
-
- if (bit (inst1, 11) && reg != 0)
- nextpc = pc_val + imm;
- else if (!bit (inst1, 11) && reg == 0)
- nextpc = pc_val + imm;
- }
- return nextpc;
-}
-
-/* Get the raw next address. PC is the current program counter, in
- FRAME, which is assumed to be executing in ARM mode.
-
- The value returned has the execution state of the next instruction
- encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
- in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
- address. */
-
-static CORE_ADDR
-arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val;
- unsigned long this_instr;
- unsigned long status;
- CORE_ADDR nextpc;
-
- pc_val = (unsigned long) pc;
- this_instr = read_memory_unsigned_integer (pc, 4, byte_order_for_code);
-
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
-
- if (bits (this_instr, 28, 31) == INST_NV)
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- {
- /* Branch with Link and change to Thumb. */
- nextpc = BranchDest (pc, this_instr);
- nextpc |= bit (this_instr, 24) << 1;
- nextpc = MAKE_THUMB_ADDR (nextpc);
- break;
- }
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- break;
- }
- else if (condition_true (bits (this_instr, 28, 31), status))
- {
- switch (bits (this_instr, 24, 27))
- {
- case 0x0:
- case 0x1: /* data processing */
- case 0x2:
- case 0x3:
- {
- unsigned long operand1, operand2, result = 0;
- unsigned long rn;
- int c;
-
- if (bits (this_instr, 12, 15) != 15)
- break;
-
- if (bits (this_instr, 22, 25) == 0
- && bits (this_instr, 4, 7) == 9) /* multiply */
- error (_("Invalid update to pc in instruction"));
-
- /* BX <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff3)
- {
- rn = bits (this_instr, 0, 3);
- nextpc = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- return nextpc;
- }
-
- /* Multiply into PC. */
- c = (status & FLAG_C) ? 1 : 0;
- rn = bits (this_instr, 16, 19);
- operand1 = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- if (bit (this_instr, 25))
- {
- unsigned long immval = bits (this_instr, 0, 7);
- unsigned long rotate = 2 * bits (this_instr, 8, 11);
- operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
- & 0xffffffff;
- }
- else /* operand 2 is a shifted register. */
- operand2 = shifted_reg_val (frame, this_instr, c,
- pc_val, status);
-
- switch (bits (this_instr, 21, 24))
- {
- case 0x0: /*and */
- result = operand1 & operand2;
- break;
-
- case 0x1: /*eor */
- result = operand1 ^ operand2;
- break;
-
- case 0x2: /*sub */
- result = operand1 - operand2;
- break;
-
- case 0x3: /*rsb */
- result = operand2 - operand1;
- break;
-
- case 0x4: /*add */
- result = operand1 + operand2;
- break;
-
- case 0x5: /*adc */
- result = operand1 + operand2 + c;
- break;
-
- case 0x6: /*sbc */
- result = operand1 - operand2 + c;
- break;
-
- case 0x7: /*rsc */
- result = operand2 - operand1 + c;
- break;
-
- case 0x8:
- case 0x9:
- case 0xa:
- case 0xb: /* tst, teq, cmp, cmn */
- result = (unsigned long) nextpc;
- break;
-
- case 0xc: /*orr */
- result = operand1 | operand2;
- break;
-
- case 0xd: /*mov */
- /* Always step into a function. */
- result = operand2;
- break;
-
- case 0xe: /*bic */
- result = operand1 & ~operand2;
- break;
-
- case 0xf: /*mvn */
- result = ~operand2;
- break;
- }
-
- /* In 26-bit APCS the bottom two bits of the result are
- ignored, and we always end up in ARM state. */
- if (!arm_apcs_32)
- nextpc = arm_addr_bits_remove (gdbarch, result);
- else
- nextpc = result;
-
- break;
- }
-
- case 0x4:
- case 0x5: /* data transfer */
- case 0x6:
- case 0x7:
- if (bit (this_instr, 20))
- {
- /* load */
- if (bits (this_instr, 12, 15) == 15)
- {
- /* rd == pc */
- unsigned long rn;
- unsigned long base;
-
- if (bit (this_instr, 22))
- error (_("Invalid update to pc in instruction"));
-
- /* byte write to PC */
- rn = bits (this_instr, 16, 19);
- base = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
-
- if (bit (this_instr, 24))
- {
- /* pre-indexed */
- int c = (status & FLAG_C) ? 1 : 0;
- unsigned long offset =
- (bit (this_instr, 25)
- ? shifted_reg_val (frame, this_instr, c, pc_val, status)
- : bits (this_instr, 0, 11));
-
- if (bit (this_instr, 23))
- base += offset;
- else
- base -= offset;
- }
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR) base,
- 4, byte_order);
- }
- }
- break;
-
- case 0x8:
- case 0x9: /* block transfer */
- if (bit (this_instr, 20))
- {
- /* LDM */
- if (bit (this_instr, 15))
- {
- /* loading pc */
- int offset = 0;
- unsigned long rn_val
- = get_frame_register_unsigned (frame,
- bits (this_instr, 16, 19));
-
- if (bit (this_instr, 23))
- {
- /* up */
- unsigned long reglist = bits (this_instr, 0, 14);
- offset = bitcount (reglist) * 4;
- if (bit (this_instr, 24)) /* pre */
- offset += 4;
- }
- else if (bit (this_instr, 24))
- offset = -4;
-
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR)
- (rn_val + offset),
- 4, byte_order);
- }
- }
- break;
-
- case 0xb: /* branch & link */
- case 0xa: /* branch */
- {
- nextpc = BranchDest (pc, this_instr);
- break;
- }
-
- case 0xc:
- case 0xd:
- case 0xe: /* coproc ops */
- break;
- case 0xf: /* SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
-
- }
- break;
-
- default:
- fprintf_filtered (gdb_stderr, _("Bad bit-field extraction\n"));
- return (pc);
- }
- }
-
- return nextpc;
-}
-
-/* Determine next PC after current instruction executes. Will call either
- arm_get_next_pc_raw or thumb_get_next_pc_raw. Error out if infinite
- loop is detected. */
-
-CORE_ADDR
-arm_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
-{
- CORE_ADDR nextpc;
-
- if (arm_frame_is_thumb (frame))
- nextpc = thumb_get_next_pc_raw (frame, pc);
- else
- nextpc = arm_get_next_pc_raw (frame, pc);
-
- return nextpc;
-}
-
-/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
- of the appropriate mode (as encoded in the PC value), even if this
- differs from what would be expected according to the symbol tables. */
-
-void
-arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
- struct address_space *aspace,
- CORE_ADDR pc)
-{
- struct cleanup *old_chain
- = make_cleanup_restore_integer (&arm_override_mode);
-
- arm_override_mode = IS_THUMB_ADDR (pc);
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
-
- insert_single_step_breakpoint (gdbarch, aspace, pc);
-
- do_cleanups (old_chain);
-}
-
-/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
- instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
- is found, attempt to step through it. A breakpoint is placed at the end of
- the sequence. */
-
-static int
-thumb_deal_with_atomic_sequence_raw (struct frame_info *frame)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned short insn1, insn2;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
- ULONGEST status, itstate;
-
- /* We currently do not support atomic sequences within an IT block. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
- if (itstate & 0x0f)
- return 0;
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (thumb_insn_size (insn1) != 4)
- return 0;
-
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (!((insn1 & 0xfff0) == 0xe850
- || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- if (thumb_insn_size (insn1) != 4)
- {
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb_instruction_changes_pc (insn1))
- return 0;
- }
- else
- {
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf800) == 0xf000
- && (insn2 & 0xd000) == 0x8000
- && (insn1 & 0x0380) != 0x0380)
- {
- int sign, j1, j2, imm1, imm2;
- unsigned int offset;
-
- sign = sbits (insn1, 10, 10);
- imm1 = bits (insn1, 0, 5);
- imm2 = bits (insn2, 0, 10);
- j1 = bit (insn2, 13);
- j2 = bit (insn2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + offset;
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb2_instruction_changes_pc (insn1, insn2))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn1 & 0xfff0) == 0xe840
- || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
- break;
- }
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (breaks[index]));
-
- return 1;
-}
-
-static int
-arm_deal_with_atomic_sequence_raw (struct frame_info *frame)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned int insn;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
- Note that we do not currently support conditionally executed atomic
- instructions. */
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
- if ((insn & 0xff9000f0) != 0xe1900090)
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
-
- /* Assume that there is at most one conditional branch in the atomic
- sequence. If a conditional branch is found, put a breakpoint in
- its destination address. */
- if (bits (insn, 24, 27) == 0xa)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found, fallback
- to the standard single-step code. */
-
- breaks[1] = BranchDest (loc - 4, insn);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other* instructions
- but conditional branches to change the PC. Fall back to standard
- code to avoid losing control of execution. */
- else if (arm_instruction_changes_pc (insn))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn & 0xff9000f0) == 0xe1800090)
- break;
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
-
- return 1;
-}
-
-int
-arm_deal_with_atomic_sequence (struct frame_info *frame)
-{
- if (arm_frame_is_thumb (frame))
- return thumb_deal_with_atomic_sequence_raw (frame);
- else
- return arm_deal_with_atomic_sequence_raw (frame);
-}
-
-/* single_step() is called just before we want to resume the inferior,
- if we want to single-step it but there is no hardware or kernel
- single-step support. We find the target of the coming instruction
- and breakpoint it. */
-
-int
-arm_software_single_step (struct frame_info *frame)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- CORE_ADDR next_pc;
-
- if (arm_deal_with_atomic_sequence (frame))
- return 1;
-
- next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
-
- return 1;
-}
-
-/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
- the buffer to be NEW_LEN bytes ending at ENDADDR. Return
- NULL if an error occurs. BUF is freed. */
-
-static gdb_byte *
-extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
- int old_len, int new_len)
-{
- gdb_byte *new_buf;
- int bytes_to_read = new_len - old_len;
-
- new_buf = xmalloc (new_len);
- memcpy (new_buf + bytes_to_read, buf, old_len);
- xfree (buf);
- if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
- {
- xfree (new_buf);
- return NULL;
- }
- return new_buf;
-}
-
-/* An IT block is at most the 2-byte IT instruction followed by
- four 4-byte instructions. The furthest back we must search to
- find an IT block that affects the current instruction is thus
- 2 + 3 * 4 == 14 bytes. */
-#define MAX_IT_BLOCK_PREFIX 14
-
-/* Use a quick scan if there are more than this many bytes of
- code. */
-#define IT_SCAN_THRESHOLD 32
-
-/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
- A breakpoint in an IT block may not be hit, depending on the
- condition flags. */
-static CORE_ADDR
-arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
-{
- gdb_byte *buf;
- char map_type;
- CORE_ADDR boundary, func_start;
- int buf_len;
- enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
- int i, any, last_it, last_it_count;
-
- /* If we are using BKPT breakpoints, none of this is necessary. */
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
- return bpaddr;
-
- /* ARM mode does not have this problem. */
- if (!arm_pc_is_thumb (gdbarch, bpaddr))
- return bpaddr;
-
- /* We are setting a breakpoint in Thumb code that could potentially
- contain an IT block. The first step is to find how much Thumb
- code there is; we do not need to read outside of known Thumb
- sequences. */
- map_type = arm_find_mapping_symbol (bpaddr, &boundary);
- if (map_type == 0)
- /* Thumb-2 code must have mapping symbols to have a chance. */
- return bpaddr;
-
- bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
-
- if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
- && func_start > boundary)
- boundary = func_start;
-
- /* Search for a candidate IT instruction. We have to do some fancy
- footwork to distinguish a real IT instruction from the second
- half of a 32-bit instruction, but there is no need for that if
- there's no candidate. */
- buf_len = min (bpaddr - boundary, MAX_IT_BLOCK_PREFIX);
- if (buf_len == 0)
- /* No room for an IT instruction. */
- return bpaddr;
-
- buf = xmalloc (buf_len);
- if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
- return bpaddr;
- any = 0;
- for (i = 0; i < buf_len; i += 2)
- {
- unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- any = 1;
- break;
- }
- }
if (any == 0)
{
xfree (buf);
Generally ARM displaced stepping works as follows:
1. When an instruction is to be single-stepped, it is first decoded by
- arm_process_displaced_insn (called from arm_displaced_step_copy_insn).
- Depending on the type of instruction, it is then copied to a scratch
- location, possibly in a modified form. The copy_* set of functions
- performs such modification, as necessary. A breakpoint is placed after
- the modified instruction in the scratch space to return control to GDB.
- Note in particular that instructions which modify the PC will no longer
- do so after modification.
+ arm_process_displaced_insn. Depending on the type of instruction, it is
+ then copied to a scratch location, possibly in a modified form. The
+ copy_* set of functions performs such modification, as necessary. A
+ breakpoint is placed after the modified instruction in the scratch space
+ to return control to GDB. Note in particular that instructions which
+ modify the PC will no longer do so after modification.
2. The instruction is single-stepped, by setting the PC to the scratch
location address, and resuming. Control returns to GDB when the
/* Copy 16-bit Thumb(Thumb and 16-bit Thumb-2) instruction without any
modification. */
static int
-thumb_copy_unmodified_16bit (struct gdbarch *gdbarch, unsigned int insn,
+thumb_copy_unmodified_16bit (struct gdbarch *gdbarch, uint16_t insn,
const char *iname,
struct displaced_step_closure *dsc)
{
/* Copy B Thumb instructions. */
static int
-thumb_copy_b (struct gdbarch *gdbarch, unsigned short insn,
+thumb_copy_b (struct gdbarch *gdbarch, uint16_t insn,
struct displaced_step_closure *dsc)
{
unsigned int cond = 0;
Preparation: tmp1, tmp2, tmp3 <- r0, r1, r2;
r0, r1, r2 <- rd, rn, rm
- Insn: <op><cond> r0, r1, r2 [, <shift>]
+ Insn: <op><cond> r0, [r1,] r2 [, <shift>]
Cleanup: rd <- r0; r0, r1, r2 <- tmp1, tmp2, tmp3
*/
struct regcache *regs,
struct displaced_step_closure *dsc)
{
- unsigned rn, rm, rd;
+ unsigned rm, rd;
- rd = bits (insn, 3, 6);
- rn = (bit (insn, 7) << 3) | bits (insn, 0, 2);
- rm = 2;
+ rm = bits (insn, 3, 6);
+ rd = (bit (insn, 7) << 3) | bits (insn, 0, 2);
- if (rd != ARM_PC_REGNUM && rn != ARM_PC_REGNUM)
+ if (rd != ARM_PC_REGNUM && rm != ARM_PC_REGNUM)
return thumb_copy_unmodified_16bit (gdbarch, insn, "ALU reg", dsc);
if (debug_displaced)
- fprintf_unfiltered (gdb_stdlog, "displaced: copying reg %s insn %.4x\n",
- "ALU", (unsigned short) insn);
+ fprintf_unfiltered (gdb_stdlog, "displaced: copying ALU reg insn %.4x\n",
+ (unsigned short) insn);
- dsc->modinsn[0] = ((insn & 0xff00) | 0x08);
+ dsc->modinsn[0] = ((insn & 0xff00) | 0x10);
- install_alu_reg (gdbarch, regs, dsc, rd, rn, rm);
+ install_alu_reg (gdbarch, regs, dsc, rd, rd, rm);
return 0;
}
transfers, which have a different encoding to byte/word transfers. */
static int
-arm_copy_extra_ld_st (struct gdbarch *gdbarch, uint32_t insn, int unpriveleged,
+arm_copy_extra_ld_st (struct gdbarch *gdbarch, uint32_t insn, int unprivileged,
struct regcache *regs, struct displaced_step_closure *dsc)
{
unsigned int op1 = bits (insn, 20, 24);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "displaced: copying %sextra load/store "
- "insn %.8lx\n", unpriveleged ? "unpriveleged " : "",
+ "insn %.8lx\n", unprivileged ? "unprivileged " : "",
(unsigned long) insn);
opcode = ((op2 << 2) | (op1 & 0x1) | ((op1 & 0x4) >> 1)) - 4;
contiguous chunk r0...rX before doing the transfer, then shuffling
registers into the correct places in the cleanup routine. */
unsigned int regmask = insn & 0xffff;
- unsigned int num_in_list = bitcount (regmask), new_regmask, bit = 1;
- unsigned int to = 0, from = 0, i, new_rn;
+ unsigned int num_in_list = bitcount (regmask), new_regmask;
+ unsigned int i;
for (i = 0; i < num_in_list; i++)
dsc->tmp[i] = displaced_read_reg (regs, dsc, i);
else
{
unsigned int regmask = dsc->u.block.regmask;
- unsigned int num_in_list = bitcount (regmask), new_regmask, bit = 1;
- unsigned int to = 0, from = 0, i, new_rn;
+ unsigned int num_in_list = bitcount (regmask), new_regmask;
+ unsigned int i;
for (i = 0; i < num_in_list; i++)
dsc->tmp[i] = displaced_read_reg (regs, dsc, i);
return 0;
}
+/* Wrapper over read_memory_unsigned_integer for use in arm_get_next_pcs.
+ This is used to avoid a dependency on BFD's bfd_endian enum. */
+
+ULONGEST
+arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len,
+ int byte_order)
+{
+ return read_memory_unsigned_integer (memaddr, len,
+ (enum bfd_endian) byte_order);
+}
+
+/* Wrapper over gdbarch_addr_bits_remove for use in arm_get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val)
+{
+ return gdbarch_addr_bits_remove (get_regcache_arch (self->regcache), val);
+}
+
+/* Wrapper over syscall_next_pc for use in get_next_pcs. */
+
+static CORE_ADDR
+arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self)
+{
+ return 0;
+}
+
+/* Wrapper over arm_is_thumb for use in arm_get_next_pcs. */
+
+int
+arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb (self->regcache);
+}
+
+/* single_step() is called just before we want to resume the inferior,
+ if we want to single-step it but there is no hardware or kernel
+ single-step support. We find the target of the coming instructions
+ and breakpoint them. */
+
+int
+arm_software_single_step (struct frame_info *frame)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ 0,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx);
+
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+
+ do_cleanups (old_chain);
+
+ return 1;
+}
+
/* Cleanup/copy SVC (SWI) instructions. These two functions are overridden
for Linux, where some SVC instructions must be treated specially. */
{
unsigned int op2 = bits (insn, 4, 6);
unsigned int op = bits (insn, 21, 22);
- unsigned int op1 = bits (insn, 16, 19);
switch (op2)
{
else if ((op1 & 0x10) == 0x10 && op2 == 0x9)
return arm_copy_unmodified (gdbarch, insn, "synch", dsc);
else if (op2 == 0xb || (op2 & 0xd) == 0xd)
- /* 2nd arg means "unpriveleged". */
+ /* 2nd arg means "unprivileged". */
return arm_copy_extra_ld_st (gdbarch, insn, (op1 & 0x12) == 0x02, regs,
dsc);
}
{
int a = bit (insn, 25), b = bit (insn, 4);
uint32_t op1 = bits (insn, 20, 24);
- int rn_f = bits (insn, 16, 19) == 0xf;
if ((!a && (op1 & 0x05) == 0x00 && (op1 & 0x17) != 0x02)
|| (a && (op1 & 0x05) == 0x00 && (op1 & 0x17) != 0x02 && !b))
}
static int
-arm_decode_b_bl_ldmstm (struct gdbarch *gdbarch, int32_t insn,
+arm_decode_b_bl_ldmstm (struct gdbarch *gdbarch, uint32_t insn,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
}
static int
-arm_decode_svc_copro (struct gdbarch *gdbarch, uint32_t insn, CORE_ADDR to,
+arm_decode_svc_copro (struct gdbarch *gdbarch, uint32_t insn,
struct regcache *regs, struct displaced_step_closure *dsc)
{
unsigned int op1 = bits (insn, 20, 25);
int op = bit (insn, 4);
unsigned int coproc = bits (insn, 8, 11);
- unsigned int rn = bits (insn, 16, 19);
if ((op1 & 0x20) == 0x00 && (op1 & 0x3a) != 0x00 && (coproc & 0xe) == 0xa)
return arm_decode_ext_reg_ld_st (gdbarch, insn, regs, dsc);
struct displaced_step_closure *dsc)
{
unsigned int coproc = bits (insn2, 8, 11);
- unsigned int op1 = bits (insn1, 4, 9);
unsigned int bit_5_8 = bits (insn1, 5, 8);
unsigned int bit_9 = bit (insn1, 9);
unsigned int bit_4 = bit (insn1, 4);
- unsigned int rn = bits (insn1, 0, 3);
if (bit_9 == 0)
{
}
static int
-thumb_copy_16bit_ldr_literal (struct gdbarch *gdbarch, unsigned short insn1,
+thumb_copy_16bit_ldr_literal (struct gdbarch *gdbarch, uint16_t insn1,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
unsigned int rt = bits (insn1, 8, 10);
unsigned int pc;
int imm8 = (bits (insn1, 0, 7) << 2);
- CORE_ADDR from = dsc->insn_addr;
/* LDR Rd, #imm8
}
static int
-thumb_copy_pop_pc_16bit (struct gdbarch *gdbarch, unsigned short insn1,
+thumb_copy_pop_pc_16bit (struct gdbarch *gdbarch, uint16_t insn1,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
else
{
unsigned int num_in_list = bitcount (dsc->u.block.regmask);
- unsigned int new_regmask, bit = 1;
- unsigned int to = 0, from = 0, i, new_rn;
+ unsigned int i;
+ unsigned int new_regmask;
for (i = 0; i < num_in_list + 1; i++)
dsc->tmp[i] = displaced_read_reg (regs, dsc, i);
int rt = bits (insn2, 12, 15);
int rn = bits (insn1, 0, 3);
int op1 = bits (insn1, 7, 8);
- int err = 0;
switch (bits (insn1, 5, 6))
{
static void
thumb_process_displaced_insn (struct gdbarch *gdbarch, CORE_ADDR from,
- CORE_ADDR to, struct regcache *regs,
+ struct regcache *regs,
struct displaced_step_closure *dsc)
{
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
dsc->wrote_to_pc = 0;
if (!displaced_in_arm_mode (regs))
- return thumb_process_displaced_insn (gdbarch, from, to, regs, dsc);
+ return thumb_process_displaced_insn (gdbarch, from, regs, dsc);
dsc->is_thumb = 0;
dsc->insn_size = 4;
break;
case 0xc: case 0xd: case 0xe: case 0xf:
- err = arm_decode_svc_copro (gdbarch, insn, to, regs, dsc);
+ err = arm_decode_svc_copro (gdbarch, insn, regs, dsc);
break;
}
paddress (gdbarch, from), paddress (gdbarch, to));
}
-/* Entry point for copying an instruction into scratch space for displaced
- stepping. */
-
-struct displaced_step_closure *
-arm_displaced_step_copy_insn (struct gdbarch *gdbarch,
- CORE_ADDR from, CORE_ADDR to,
- struct regcache *regs)
-{
- struct displaced_step_closure *dsc
- = xmalloc (sizeof (struct displaced_step_closure));
- arm_process_displaced_insn (gdbarch, from, to, regs, dsc);
- arm_displaced_init_closure (gdbarch, from, to, dsc);
-
- return dsc;
-}
-
/* Entry point for cleaning things up after a displaced instruction has been
single-stepped. */
static int
gdb_print_insn_arm (bfd_vma memaddr, disassemble_info *info)
{
- struct gdbarch *gdbarch = info->application_data;
+ struct gdbarch *gdbarch = (struct gdbarch *) info->application_data;
if (arm_pc_is_thumb (gdbarch, memaddr))
{
static int
arm_return_in_memory (struct gdbarch *gdbarch, struct type *type)
{
- int nRc;
enum type_code code;
- CHECK_TYPEDEF (type);
+ type = check_typedef (type);
- /* In the ARM ABI, "integer" like aggregate types are returned in
- registers. For an aggregate type to be integer like, its size
- must be less than or equal to INT_REGISTER_SIZE and the
- offset of each addressable subfield must be zero. Note that bit
- fields are not addressable, and all addressable subfields of
- unions always start at offset zero.
-
- This function is based on the behaviour of GCC 2.95.1.
- See: gcc/arm.c: arm_return_in_memory() for details.
-
- Note: All versions of GCC before GCC 2.95.2 do not set up the
- parameters correctly for a function returning the following
- structure: struct { float f;}; This should be returned in memory,
- not a register. Richard Earnshaw sent me a patch, but I do not
- know of any way to detect if a function like the above has been
- compiled with the correct calling convention. */
+ /* Simple, non-aggregate types (ie not including vectors and
+ complex) are always returned in a register (or registers). */
+ code = TYPE_CODE (type);
+ if (TYPE_CODE_STRUCT != code && TYPE_CODE_UNION != code
+ && TYPE_CODE_ARRAY != code && TYPE_CODE_COMPLEX != code)
+ return 0;
- /* All aggregate types that won't fit in a register must be returned
- in memory. */
- if (TYPE_LENGTH (type) > INT_REGISTER_SIZE)
+ if (TYPE_CODE_ARRAY == code && TYPE_VECTOR (type))
{
- return 1;
+ /* Vector values should be returned using ARM registers if they
+ are not over 16 bytes. */
+ return (TYPE_LENGTH (type) > 16);
}
- /* The AAPCS says all aggregates not larger than a word are returned
- in a register. */
if (gdbarch_tdep (gdbarch)->arm_abi != ARM_ABI_APCS)
- return 0;
-
- /* The only aggregate types that can be returned in a register are
- structs and unions. Arrays must be returned in memory. */
- code = TYPE_CODE (type);
- if ((TYPE_CODE_STRUCT != code) && (TYPE_CODE_UNION != code))
{
+ /* The AAPCS says all aggregates not larger than a word are returned
+ in a register. */
+ if (TYPE_LENGTH (type) <= INT_REGISTER_SIZE)
+ return 0;
+
return 1;
}
+ else
+ {
+ int nRc;
- /* Assume all other aggregate types can be returned in a register.
- Run a check for structures, unions and arrays. */
- nRc = 0;
+ /* All aggregate types that won't fit in a register must be returned
+ in memory. */
+ if (TYPE_LENGTH (type) > INT_REGISTER_SIZE)
+ return 1;
- if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code))
- {
- int i;
- /* Need to check if this struct/union is "integer" like. For
- this to be true, its size must be less than or equal to
- INT_REGISTER_SIZE and the offset of each addressable
- subfield must be zero. Note that bit fields are not
- addressable, and unions always start at offset zero. If any
- of the subfields is a floating point type, the struct/union
- cannot be an integer type. */
-
- /* For each field in the object, check:
- 1) Is it FP? --> yes, nRc = 1;
- 2) Is it addressable (bitpos != 0) and
- not packed (bitsize == 0)?
- --> yes, nRc = 1
- */
-
- for (i = 0; i < TYPE_NFIELDS (type); i++)
- {
- enum type_code field_type_code;
- field_type_code = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type,
- i)));
-
- /* Is it a floating point type field? */
- if (field_type_code == TYPE_CODE_FLT)
- {
- nRc = 1;
- break;
- }
+ /* In the ARM ABI, "integer" like aggregate types are returned in
+ registers. For an aggregate type to be integer like, its size
+ must be less than or equal to INT_REGISTER_SIZE and the
+ offset of each addressable subfield must be zero. Note that bit
+ fields are not addressable, and all addressable subfields of
+ unions always start at offset zero.
+
+ This function is based on the behaviour of GCC 2.95.1.
+ See: gcc/arm.c: arm_return_in_memory() for details.
+
+ Note: All versions of GCC before GCC 2.95.2 do not set up the
+ parameters correctly for a function returning the following
+ structure: struct { float f;}; This should be returned in memory,
+ not a register. Richard Earnshaw sent me a patch, but I do not
+ know of any way to detect if a function like the above has been
+ compiled with the correct calling convention. */
- /* If bitpos != 0, then we have to care about it. */
- if (TYPE_FIELD_BITPOS (type, i) != 0)
+ /* Assume all other aggregate types can be returned in a register.
+ Run a check for structures, unions and arrays. */
+ nRc = 0;
+
+ if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code))
+ {
+ int i;
+ /* Need to check if this struct/union is "integer" like. For
+ this to be true, its size must be less than or equal to
+ INT_REGISTER_SIZE and the offset of each addressable
+ subfield must be zero. Note that bit fields are not
+ addressable, and unions always start at offset zero. If any
+ of the subfields is a floating point type, the struct/union
+ cannot be an integer type. */
+
+ /* For each field in the object, check:
+ 1) Is it FP? --> yes, nRc = 1;
+ 2) Is it addressable (bitpos != 0) and
+ not packed (bitsize == 0)?
+ --> yes, nRc = 1
+ */
+
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
{
- /* Bitfields are not addressable. If the field bitsize is
- zero, then the field is not packed. Hence it cannot be
- a bitfield or any other packed type. */
- if (TYPE_FIELD_BITSIZE (type, i) == 0)
+ enum type_code field_type_code;
+
+ field_type_code
+ = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type,
+ i)));
+
+ /* Is it a floating point type field? */
+ if (field_type_code == TYPE_CODE_FLT)
{
nRc = 1;
break;
}
+
+ /* If bitpos != 0, then we have to care about it. */
+ if (TYPE_FIELD_BITPOS (type, i) != 0)
+ {
+ /* Bitfields are not addressable. If the field bitsize is
+ zero, then the field is not packed. Hence it cannot be
+ a bitfield or any other packed type. */
+ if (TYPE_FIELD_BITSIZE (type, i) == 0)
+ {
+ nRc = 1;
+ break;
+ }
+ }
}
}
- }
- return nRc;
+ return nRc;
+ }
}
/* Write into appropriate registers a function return value of type
|| arm_return_in_memory (gdbarch, valtype))
return RETURN_VALUE_STRUCT_CONVENTION;
}
-
- /* AAPCS returns complex types longer than a register in memory. */
- if (tdep->arm_abi != ARM_ABI_APCS
- && TYPE_CODE (valtype) == TYPE_CODE_COMPLEX
- && TYPE_LENGTH (valtype) > INT_REGISTER_SIZE)
- return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (valtype) == TYPE_CODE_COMPLEX)
+ {
+ if (arm_return_in_memory (gdbarch, valtype))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ }
if (writebuf)
arm_store_return_value (valtype, regcache, writebuf);
_call_via_xx, where x is the register name. The possible names
are r0-r9, sl, fp, ip, sp, and lr. ARM RealView has similar
functions, named __ARM_call_via_r[0-7]. */
- if (strncmp (name, "_call_via_", 10) == 0
- || strncmp (name, "__ARM_call_via_", strlen ("__ARM_call_via_")) == 0)
+ if (startswith (name, "_call_via_")
+ || startswith (name, "__ARM_call_via_"))
{
/* Use the name suffix to determine which register contains the
target PC. */
namelen = strlen (name);
if (name[0] == '_' && name[1] == '_'
&& ((namelen > 2 + strlen ("_from_thumb")
- && strncmp (name + namelen - strlen ("_from_thumb"), "_from_thumb",
- strlen ("_from_thumb")) == 0)
+ && startswith (name + namelen - strlen ("_from_thumb"), "_from_thumb"))
|| (namelen > 2 + strlen ("_from_arm")
- && strncmp (name + namelen - strlen ("_from_arm"), "_from_arm",
- strlen ("_from_arm")) == 0)))
+ && startswith (name + namelen - strlen ("_from_arm"), "_from_arm"))))
{
char *target_name;
int target_len = namelen - 2;
else
target_len -= strlen ("_from_arm");
- target_name = alloca (target_len + 1);
+ target_name = (char *) alloca (target_len + 1);
memcpy (target_name, name + 2, target_len);
target_name[target_len] = '\0';
set_fp_model_sfunc (char *args, int from_tty,
struct cmd_list_element *c)
{
- enum arm_float_model fp_model;
+ int fp_model;
for (fp_model = ARM_FLOAT_AUTO; fp_model != ARM_FLOAT_LAST; fp_model++)
if (strcmp (current_fp_model, fp_model_strings[fp_model]) == 0)
{
- arm_fp_model = fp_model;
+ arm_fp_model = (enum arm_float_model) fp_model;
break;
}
arm_set_abi (char *args, int from_tty,
struct cmd_list_element *c)
{
- enum arm_abi_kind arm_abi;
+ int arm_abi;
for (arm_abi = ARM_ABI_AUTO; arm_abi != ARM_ABI_LAST; arm_abi++)
if (strcmp (arm_abi_string, arm_abi_strings[arm_abi]) == 0)
{
- arm_abi_global = arm_abi;
+ arm_abi_global = (enum arm_abi_kind) arm_abi;
break;
}
arm_show_force_mode (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch ());
-
fprintf_filtered (file,
_("The current execution mode assumed "
"(even when symbols are available) is \"%s\".\n"),
static void
arm_elf_make_msymbol_special(asymbol *sym, struct minimal_symbol *msym)
{
- if (ARM_SYM_BRANCH_TYPE (&((elf_symbol_type *)sym)->internal_elf_sym)
+ elf_symbol_type *elfsym = (elf_symbol_type *) sym;
+
+ if (ARM_GET_SYM_BRANCH_TYPE (elfsym->internal_elf_sym.st_target_internal)
== ST_BRANCH_TO_THUMB)
MSYMBOL_SET_SPECIAL (msym);
}
static void
arm_objfile_data_free (struct objfile *objfile, void *arg)
{
- struct arm_per_objfile *data = arg;
+ struct arm_per_objfile *data = (struct arm_per_objfile *) arg;
unsigned int i;
for (i = 0; i < objfile->obfd->section_count; i++)
if (name[1] != 'a' && name[1] != 't' && name[1] != 'd')
return;
- data = objfile_data (objfile, arm_objfile_data_key);
+ data = (struct arm_per_objfile *) objfile_data (objfile,
+ arm_objfile_data_key);
if (data == NULL)
{
data = OBSTACK_ZALLOC (&objfile->objfile_obstack,
static struct value *
value_of_arm_user_reg (struct frame_info *frame, const void *baton)
{
- const int *reg_p = baton;
+ const int *reg_p = (const int *) baton;
return value_of_register (*reg_p, frame);
}
\f
/* Otherwise we don't have a useful guess. */
}
+/* Implement the code_of_frame_writable gdbarch method. */
+
+static int
+arm_code_of_frame_writable (struct gdbarch *gdbarch, struct frame_info *frame)
+{
+ if (gdbarch_tdep (gdbarch)->is_m
+ && get_frame_type (frame) == SIGTRAMP_FRAME)
+ {
+ /* M-profile exception frames return to some magic PCs, where
+ isn't writable at all. */
+ return 0;
+ }
+ else
+ return 1;
+}
+
\f
/* Initialize the current architecture based on INFO. If possible,
re-use an architecture from ARCHES, which is a list of
enum arm_float_model fp_model = arm_fp_model;
struct tdesc_arch_data *tdesc_data = NULL;
int i, is_m = 0;
- int have_vfp_registers = 0, have_vfp_pseudos = 0, have_neon_pseudos = 0;
+ int vfp_register_count = 0, have_vfp_pseudos = 0, have_neon_pseudos = 0;
+ int have_wmmx_registers = 0;
int have_neon = 0;
int have_fpa_registers = 1;
const struct target_desc *tdesc = info.target_desc;
anyway, so assume APCS. */
arm_abi = ARM_ABI_APCS;
}
- else if (ei_osabi == ELFOSABI_NONE)
+ else if (ei_osabi == ELFOSABI_NONE || ei_osabi == ELFOSABI_GNU)
{
int eabi_ver = EF_ARM_EABI_VERSION (e_flags);
int attr_arch, attr_profile;
OBJ_ATTR_PROC,
Tag_ABI_VFP_args))
{
- case 0:
+ case AEABI_VFP_args_base:
/* "The user intended FP parameter/result
passing to conform to AAPCS, base
variant". */
fp_model = ARM_FLOAT_SOFT_VFP;
break;
- case 1:
+ case AEABI_VFP_args_vfp:
/* "The user intended FP parameter/result
passing to conform to AAPCS, VFP
variant". */
fp_model = ARM_FLOAT_VFP;
break;
- case 2:
+ case AEABI_VFP_args_toolchain:
/* "The user intended FP parameter/result
passing to conform to tool chain-specific
conventions" - we don't know any such
conventions, so leave it as "auto". */
break;
+ case AEABI_VFP_args_compatible:
+ /* "Code is compatible with both the base
+ and VFP variants; the user did not permit
+ non-variadic functions to pass FP
+ parameters/results" - leave it as
+ "auto". */
+ break;
default:
/* Attribute value not mentioned in the
- October 2008 ABI, so leave it as
+ November 2012 ABI, so leave it as
"auto". */
break;
}
tdesc_data_cleanup (tdesc_data);
return NULL;
}
+
+ have_wmmx_registers = 1;
}
/* If we have a VFP unit, check whether the single precision registers
if (tdesc_unnumbered_register (feature, "s0") == 0)
have_vfp_pseudos = 1;
- have_vfp_registers = 1;
+ vfp_register_count = i;
/* If we have VFP, also check for NEON. The architecture allows
NEON without VFP (integer vector operations only), but GDB
return best_arch->gdbarch;
}
- tdep = xcalloc (1, sizeof (struct gdbarch_tdep));
+ tdep = XCNEW (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
/* Record additional information about the architecture we are defining.
tdep->fp_model = fp_model;
tdep->is_m = is_m;
tdep->have_fpa_registers = have_fpa_registers;
- tdep->have_vfp_registers = have_vfp_registers;
+ tdep->have_wmmx_registers = have_wmmx_registers;
+ gdb_assert (vfp_register_count == 0
+ || vfp_register_count == 16
+ || vfp_register_count == 32);
+ tdep->vfp_register_count = vfp_register_count;
tdep->have_vfp_pseudos = have_vfp_pseudos;
tdep->have_neon_pseudos = have_neon_pseudos;
tdep->have_neon = have_neon;
set_gdbarch_push_dummy_call (gdbarch, arm_push_dummy_call);
set_gdbarch_frame_align (gdbarch, arm_frame_align);
+ if (is_m)
+ set_gdbarch_code_of_frame_writable (gdbarch, arm_code_of_frame_writable);
+
set_gdbarch_write_pc (gdbarch, arm_write_pc);
/* Frame handling. */
/* Advance PC across function entry code. */
set_gdbarch_skip_prologue (gdbarch, arm_skip_prologue);
- /* Detect whether PC is in function epilogue. */
- set_gdbarch_in_function_epilogue_p (gdbarch, arm_in_function_epilogue_p);
+ /* Detect whether PC is at a point where the stack has been destroyed. */
+ set_gdbarch_stack_frame_destroyed_p (gdbarch, arm_stack_frame_destroyed_p);
/* Skip trampolines. */
set_gdbarch_skip_trampoline_code (gdbarch, arm_skip_stub);
frame_unwind_append_unwinder (gdbarch, &arm_stub_unwind);
dwarf2_append_unwinders (gdbarch);
frame_unwind_append_unwinder (gdbarch, &arm_exidx_unwind);
+ frame_unwind_append_unwinder (gdbarch, &arm_epilogue_frame_unwind);
frame_unwind_append_unwinder (gdbarch, &arm_prologue_unwind);
/* Now we have tuned the configuration, set a few final things,
{
struct ui_file *stb;
long length;
- struct cmd_list_element *new_set, *new_show;
const char *setname;
const char *setdesc;
const char *const *regnames;
- int numregs, i, j;
+ int i;
static char *helptext;
char regdesc[1024], *rdptr = regdesc;
size_t rest = sizeof (regdesc);
/* Initialize the array that will be passed to
add_setshow_enum_cmd(). */
- valid_disassembly_styles
- = xmalloc ((num_disassembly_options + 1) * sizeof (char *));
+ valid_disassembly_styles = XNEWVEC (const char *,
+ num_disassembly_options + 1);
for (i = 0; i < num_disassembly_options; i++)
{
- numregs = get_arm_regnames (i, &setname, &setdesc, ®names);
+ get_arm_regnames (i, &setname, &setdesc, ®names);
valid_disassembly_styles[i] = setname;
length = snprintf (rdptr, rest, "%s - %s\n", setname, setdesc);
rdptr += length;
#define THUMB2_INSN_SIZE_BYTES 4
+/* Position of the bit within a 32-bit ARM instruction
+ that defines whether the instruction is a load or store. */
#define INSN_S_L_BIT_NUM 20
#define REG_ALLOC(REGS, LENGTH, RECORD_BUF) \
uint32_t reg_src1 = 0, reg_src2 = 0;
uint32_t immed_high = 0, immed_low = 0,offset_8 = 0, tgt_mem_addr = 0;
- uint32_t opcode1 = 0;
arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 21, 24);
arm_insn_r->decode = bits (arm_insn_r->arm_insn, 4, 7);
- opcode1 = bits (arm_insn_r->arm_insn, 20, 24);
-
if (14 == arm_insn_r->opcode || 10 == arm_insn_r->opcode)
{
uint32_t opcode1 = 0, opcode2 = 0, insn_op1 = 0;
uint32_t record_buf[8], record_buf_mem[8];
uint32_t reg_src1 = 0;
- uint32_t immed_high = 0, immed_low = 0,offset_8 = 0, tgt_mem_addr = 0;
struct regcache *reg_cache = arm_insn_r->regcache;
ULONGEST u_regval = 0;
{
/* SPSR is going to be changed. */
/* We need to get SPSR value, which is yet to be done. */
- printf_unfiltered (_("Process record does not support "
- "instruction 0x%0x at address %s.\n"),
- arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch,
- arm_insn_r->this_addr));
return -1;
}
}
arm_insn_r->reg_rec_count = 2;
/* Save SPSR also;how? */
- printf_unfiltered (_("Process record does not support "
- "instruction 0x%0x at address %s.\n"),
- arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch, arm_insn_r->this_addr));
return -1;
}
else if(8 == bits (arm_insn_r->arm_insn, 4, 7)
{
/* SPSR is going to be changed. */
/* we need to get SPSR value, which is yet to be done */
- printf_unfiltered (_("Process record does not support "
- "instruction 0x%0x at address %s.\n"),
- arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch,
- arm_insn_r->this_addr));
return -1;
}
}
/* To be done for ARMv5 and later; as of now we return -1. */
if (-1 == ret)
- printf_unfiltered (_("Process record does not support instruction x%0x "
- "at address %s.\n"),arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch, arm_insn_r->this_addr));
-
+ return ret;
REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
MEM_ALLOC (arm_insn_r->arm_mems, arm_insn_r->mem_rec_count, record_buf_mem);
uint32_t record_buf[8], record_buf_mem[8];
ULONGEST u_regval[2] = {0};
- uint32_t reg_src1 = 0, reg_src2 = 0, reg_dest = 0;
- uint32_t immed_high = 0, immed_low = 0, offset_8 = 0, tgt_mem_addr = 0;
+ uint32_t reg_src1 = 0, reg_dest = 0;
uint32_t opcode1 = 0;
arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 21, 24);
{
/* SPSR is going to be changed. */
/* How to read SPSR value? */
- printf_unfiltered (_("Process record does not support instruction "
- "0x%0x at address %s.\n"),
- arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch, arm_insn_r->this_addr));
return -1;
}
}
arm_insn_r->reg_rec_count = 2;
/* Save SPSR also; how? */
- printf_unfiltered (_("Process record does not support instruction "
- "0x%0x at address %s.\n"),arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch,
- arm_insn_r->this_addr));
return -1;
}
else if (11 == arm_insn_r->decode
return 0;
}
-/* Handling opcode 010 insns. */
-
static int
-arm_record_ld_st_imm_offset (insn_decode_record *arm_insn_r)
+arm_record_media (insn_decode_record *arm_insn_r)
{
- struct regcache *reg_cache = arm_insn_r->regcache;
+ uint32_t record_buf[8];
- uint32_t reg_src1 = 0 , reg_dest = 0;
- uint32_t offset_12 = 0, tgt_mem_addr = 0;
- uint32_t record_buf[8], record_buf_mem[8];
+ switch (bits (arm_insn_r->arm_insn, 22, 24))
+ {
+ case 0:
+ /* Parallel addition and subtraction, signed */
+ case 1:
+ /* Parallel addition and subtraction, unsigned */
+ case 2:
+ case 3:
+ /* Packing, unpacking, saturation and reversal */
+ {
+ int rd = bits (arm_insn_r->arm_insn, 12, 15);
- ULONGEST u_regval = 0;
+ record_buf[arm_insn_r->reg_rec_count++] = rd;
+ }
+ break;
- arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 21, 24);
- arm_insn_r->decode = bits (arm_insn_r->arm_insn, 4, 7);
+ case 4:
+ case 5:
+ /* Signed multiplies */
+ {
+ int rd = bits (arm_insn_r->arm_insn, 16, 19);
+ unsigned int op1 = bits (arm_insn_r->arm_insn, 20, 22);
+
+ record_buf[arm_insn_r->reg_rec_count++] = rd;
+ if (op1 == 0x0)
+ record_buf[arm_insn_r->reg_rec_count++] = ARM_PS_REGNUM;
+ else if (op1 == 0x4)
+ record_buf[arm_insn_r->reg_rec_count++]
+ = bits (arm_insn_r->arm_insn, 12, 15);
+ }
+ break;
- if (bit (arm_insn_r->arm_insn, INSN_S_L_BIT_NUM))
- {
- reg_dest = bits (arm_insn_r->arm_insn, 12, 15);
- /* LDR insn has a capability to do branching, if
- MOV LR, PC is precedded by LDR insn having Rn as R15
- in that case, it emulates branch and link insn, and hence we
- need to save CSPR and PC as well. */
- if (ARM_PC_REGNUM != reg_dest)
- {
- record_buf[0] = bits (arm_insn_r->arm_insn, 12, 15);
- arm_insn_r->reg_rec_count = 1;
- }
- else
- {
- record_buf[0] = reg_dest;
- record_buf[1] = ARM_PS_REGNUM;
- arm_insn_r->reg_rec_count = 2;
- }
+ case 6:
+ {
+ if (bit (arm_insn_r->arm_insn, 21)
+ && bits (arm_insn_r->arm_insn, 5, 6) == 0x2)
+ {
+ /* SBFX */
+ record_buf[arm_insn_r->reg_rec_count++]
+ = bits (arm_insn_r->arm_insn, 12, 15);
+ }
+ else if (bits (arm_insn_r->arm_insn, 20, 21) == 0x0
+ && bits (arm_insn_r->arm_insn, 5, 7) == 0x0)
+ {
+ /* USAD8 and USADA8 */
+ record_buf[arm_insn_r->reg_rec_count++]
+ = bits (arm_insn_r->arm_insn, 16, 19);
+ }
+ }
+ break;
+
+ case 7:
+ {
+ if (bits (arm_insn_r->arm_insn, 20, 21) == 0x3
+ && bits (arm_insn_r->arm_insn, 5, 7) == 0x7)
+ {
+ /* Permanently UNDEFINED */
+ return -1;
+ }
+ else
+ {
+ /* BFC, BFI and UBFX */
+ record_buf[arm_insn_r->reg_rec_count++]
+ = bits (arm_insn_r->arm_insn, 12, 15);
+ }
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+
+ return 0;
+}
+
+/* Handle ARM mode instructions with opcode 010. */
+
+static int
+arm_record_ld_st_imm_offset (insn_decode_record *arm_insn_r)
+{
+ struct regcache *reg_cache = arm_insn_r->regcache;
+
+ uint32_t reg_base , reg_dest;
+ uint32_t offset_12, tgt_mem_addr;
+ uint32_t record_buf[8], record_buf_mem[8];
+ unsigned char wback;
+ ULONGEST u_regval;
+
+ /* Calculate wback. */
+ wback = (bit (arm_insn_r->arm_insn, 24) == 0)
+ || (bit (arm_insn_r->arm_insn, 21) == 1);
+
+ arm_insn_r->reg_rec_count = 0;
+ reg_base = bits (arm_insn_r->arm_insn, 16, 19);
+
+ if (bit (arm_insn_r->arm_insn, INSN_S_L_BIT_NUM))
+ {
+ /* LDR (immediate), LDR (literal), LDRB (immediate), LDRB (literal), LDRBT
+ and LDRT. */
+
+ reg_dest = bits (arm_insn_r->arm_insn, 12, 15);
+ record_buf[arm_insn_r->reg_rec_count++] = reg_dest;
+
+ /* The LDR instruction is capable of doing branching. If MOV LR, PC
+ preceeds a LDR instruction having R15 as reg_base, it
+ emulates a branch and link instruction, and hence we need to save
+ CPSR and PC as well. */
+ if (ARM_PC_REGNUM == reg_dest)
+ record_buf[arm_insn_r->reg_rec_count++] = ARM_PS_REGNUM;
+
+ /* If wback is true, also save the base register, which is going to be
+ written to. */
+ if (wback)
+ record_buf[arm_insn_r->reg_rec_count++] = reg_base;
}
else
{
- /* Store, immediate offset, immediate pre-indexed,
- immediate post-indexed. */
- reg_src1 = bits (arm_insn_r->arm_insn, 16, 19);
+ /* STR (immediate), STRB (immediate), STRBT and STRT. */
+
offset_12 = bits (arm_insn_r->arm_insn, 0, 11);
- regcache_raw_read_unsigned (reg_cache, reg_src1, &u_regval);
- /* U == 1 */
+ regcache_raw_read_unsigned (reg_cache, reg_base, &u_regval);
+
+ /* Handle bit U. */
if (bit (arm_insn_r->arm_insn, 23))
- {
- tgt_mem_addr = u_regval + offset_12;
- }
+ {
+ /* U == 1: Add the offset. */
+ tgt_mem_addr = (uint32_t) u_regval + offset_12;
+ }
else
- {
- tgt_mem_addr = u_regval - offset_12;
- }
+ {
+ /* U == 0: subtract the offset. */
+ tgt_mem_addr = (uint32_t) u_regval - offset_12;
+ }
+
+ /* Bit 22 tells us whether the store instruction writes 1 byte or 4
+ bytes. */
+ if (bit (arm_insn_r->arm_insn, 22))
+ {
+ /* STRB and STRBT: 1 byte. */
+ record_buf_mem[0] = 1;
+ }
+ else
+ {
+ /* STR and STRT: 4 bytes. */
+ record_buf_mem[0] = 4;
+ }
+
+ /* Handle bit P. */
+ if (bit (arm_insn_r->arm_insn, 24))
+ record_buf_mem[1] = tgt_mem_addr;
+ else
+ record_buf_mem[1] = (uint32_t) u_regval;
- switch (arm_insn_r->opcode)
- {
- /* STR. */
- case 8:
- case 12:
- /* STR. */
- case 9:
- case 13:
- /* STRT. */
- case 1:
- case 5:
- /* STR. */
- case 4:
- case 0:
- record_buf_mem[0] = 4;
- break;
-
- /* STRB. */
- case 10:
- case 14:
- /* STRB. */
- case 11:
- case 15:
- /* STRBT. */
- case 3:
- case 7:
- /* STRB. */
- case 2:
- case 6:
- record_buf_mem[0] = 1;
- break;
-
- default:
- gdb_assert_not_reached ("no decoding pattern found");
- break;
- }
- record_buf_mem[1] = tgt_mem_addr;
arm_insn_r->mem_rec_count = 1;
- if (9 == arm_insn_r->opcode || 11 == arm_insn_r->opcode
- || 13 == arm_insn_r->opcode || 15 == arm_insn_r->opcode
- || 0 == arm_insn_r->opcode || 2 == arm_insn_r->opcode
- || 4 == arm_insn_r->opcode || 6 == arm_insn_r->opcode
- || 1 == arm_insn_r->opcode || 3 == arm_insn_r->opcode
- || 5 == arm_insn_r->opcode || 7 == arm_insn_r->opcode
- )
- {
- /* We are handling pre-indexed mode; post-indexed mode;
- where Rn is going to be changed. */
- record_buf[0] = reg_src1;
- arm_insn_r->reg_rec_count = 1;
- }
+ /* If wback is true, also save the base register, which is going to be
+ written to. */
+ if (wback)
+ record_buf[arm_insn_r->reg_rec_count++] = reg_base;
}
REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
LONGEST s_word;
ULONGEST u_regval[2];
+ if (bit (arm_insn_r->arm_insn, 4))
+ return arm_record_media (arm_insn_r);
+
arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 21, 24);
arm_insn_r->decode = bits (arm_insn_r->arm_insn, 4, 7);
return 0;
}
-/* Handling opcode 100 insns. */
+/* Handle ARM mode instructions with opcode 100. */
static int
arm_record_ld_st_multiple (insn_decode_record *arm_insn_r)
{
struct regcache *reg_cache = arm_insn_r->regcache;
-
- uint32_t register_list[16] = {0}, register_count = 0, register_bits = 0;
- uint32_t reg_src1 = 0, addr_mode = 0, no_of_regs = 0;
- uint32_t start_address = 0, index = 0;
+ uint32_t register_count = 0, register_bits;
+ uint32_t reg_base, addr_mode;
uint32_t record_buf[24], record_buf_mem[48];
+ uint32_t wback;
+ ULONGEST u_regval;
- ULONGEST u_regval[2] = {0};
+ /* Fetch the list of registers. */
+ register_bits = bits (arm_insn_r->arm_insn, 0, 15);
+ arm_insn_r->reg_rec_count = 0;
- /* This mode is exclusively for load and store multiple. */
- /* Handle incremenrt after/before and decrment after.before mode;
- Rn is changing depending on W bit, but as of now we store Rn too
- without optimization. */
+ /* Fetch the base register that contains the address we are loading data
+ to. */
+ reg_base = bits (arm_insn_r->arm_insn, 16, 19);
+
+ /* Calculate wback. */
+ wback = (bit (arm_insn_r->arm_insn, 21) == 1);
if (bit (arm_insn_r->arm_insn, INSN_S_L_BIT_NUM))
{
- /* LDM (1,2,3) where LDM (3) changes CPSR too. */
-
- if (bit (arm_insn_r->arm_insn, 20) && !bit (arm_insn_r->arm_insn, 22))
+ /* LDM/LDMIA/LDMFD, LDMDA/LDMFA, LDMDB and LDMIB. */
+
+ /* Find out which registers are going to be loaded from memory. */
+ while (register_bits)
+ {
+ if (register_bits & 0x00000001)
+ record_buf[arm_insn_r->reg_rec_count++] = register_count;
+ register_bits = register_bits >> 1;
+ register_count++;
+ }
+
+
+ /* If wback is true, also save the base register, which is going to be
+ written to. */
+ if (wback)
+ record_buf[arm_insn_r->reg_rec_count++] = reg_base;
+
+ /* Save the CPSR register. */
+ record_buf[arm_insn_r->reg_rec_count++] = ARM_PS_REGNUM;
+ }
+ else
+ {
+ /* STM (STMIA, STMEA), STMDA (STMED), STMDB (STMFD) and STMIB (STMFA). */
+
+ addr_mode = bits (arm_insn_r->arm_insn, 23, 24);
+
+ regcache_raw_read_unsigned (reg_cache, reg_base, &u_regval);
+
+ /* Find out how many registers are going to be stored to memory. */
+ while (register_bits)
+ {
+ if (register_bits & 0x00000001)
+ register_count++;
+ register_bits = register_bits >> 1;
+ }
+
+ switch (addr_mode)
+ {
+ /* STMDA (STMED): Decrement after. */
+ case 0:
+ record_buf_mem[1] = (uint32_t) u_regval
+ - register_count * INT_REGISTER_SIZE + 4;
+ break;
+ /* STM (STMIA, STMEA): Increment after. */
+ case 1:
+ record_buf_mem[1] = (uint32_t) u_regval;
+ break;
+ /* STMDB (STMFD): Decrement before. */
+ case 2:
+ record_buf_mem[1] = (uint32_t) u_regval
+ - register_count * INT_REGISTER_SIZE;
+ break;
+ /* STMIB (STMFA): Increment before. */
+ case 3:
+ record_buf_mem[1] = (uint32_t) u_regval + INT_REGISTER_SIZE;
+ break;
+ default:
+ gdb_assert_not_reached ("no decoding pattern found");
+ break;
+ }
+
+ record_buf_mem[0] = register_count * INT_REGISTER_SIZE;
+ arm_insn_r->mem_rec_count = 1;
+
+ /* If wback is true, also save the base register, which is going to be
+ written to. */
+ if (wback)
+ record_buf[arm_insn_r->reg_rec_count++] = reg_base;
+ }
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+ MEM_ALLOC (arm_insn_r->arm_mems, arm_insn_r->mem_rec_count, record_buf_mem);
+ return 0;
+}
+
+/* Handling opcode 101 insns. */
+
+static int
+arm_record_b_bl (insn_decode_record *arm_insn_r)
+{
+ uint32_t record_buf[8];
+
+ /* Handle B, BL, BLX(1) insns. */
+ /* B simply branches so we do nothing here. */
+ /* Note: BLX(1) doesnt fall here but instead it falls into
+ extension space. */
+ if (bit (arm_insn_r->arm_insn, 24))
+ {
+ record_buf[0] = ARM_LR_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ }
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+
+ return 0;
+}
+
+static int
+arm_record_unsupported_insn (insn_decode_record *arm_insn_r)
+{
+ printf_unfiltered (_("Process record does not support instruction "
+ "0x%0x at address %s.\n"),arm_insn_r->arm_insn,
+ paddress (arm_insn_r->gdbarch, arm_insn_r->this_addr));
+
+ return -1;
+}
+
+/* Record handler for vector data transfer instructions. */
+
+static int
+arm_record_vdata_transfer_insn (insn_decode_record *arm_insn_r)
+{
+ uint32_t bits_a, bit_c, bit_l, reg_t, reg_v;
+ uint32_t record_buf[4];
+
+ reg_t = bits (arm_insn_r->arm_insn, 12, 15);
+ reg_v = bits (arm_insn_r->arm_insn, 21, 23);
+ bits_a = bits (arm_insn_r->arm_insn, 21, 23);
+ bit_l = bit (arm_insn_r->arm_insn, 20);
+ bit_c = bit (arm_insn_r->arm_insn, 8);
+
+ /* Handle VMOV instruction. */
+ if (bit_l && bit_c)
+ {
+ record_buf[0] = reg_t;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ else if (bit_l && !bit_c)
+ {
+ /* Handle VMOV instruction. */
+ if (bits_a == 0x00)
+ {
+ record_buf[0] = reg_t;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ /* Handle VMRS instruction. */
+ else if (bits_a == 0x07)
+ {
+ if (reg_t == 15)
+ reg_t = ARM_PS_REGNUM;
+
+ record_buf[0] = reg_t;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ }
+ else if (!bit_l && !bit_c)
+ {
+ /* Handle VMOV instruction. */
+ if (bits_a == 0x00)
+ {
+ record_buf[0] = ARM_D0_REGNUM + reg_v;
+
+ arm_insn_r->reg_rec_count = 1;
+ }
+ /* Handle VMSR instruction. */
+ else if (bits_a == 0x07)
+ {
+ record_buf[0] = ARM_FPSCR_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ }
+ else if (!bit_l && bit_c)
+ {
+ /* Handle VMOV instruction. */
+ if (!(bits_a & 0x04))
+ {
+ record_buf[0] = (reg_v | (bit (arm_insn_r->arm_insn, 7) << 4))
+ + ARM_D0_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ /* Handle VDUP instruction. */
+ else
+ {
+ if (bit (arm_insn_r->arm_insn, 21))
+ {
+ reg_v = reg_v | (bit (arm_insn_r->arm_insn, 7) << 4);
+ record_buf[0] = reg_v + ARM_D0_REGNUM;
+ record_buf[1] = reg_v + ARM_D0_REGNUM + 1;
+ arm_insn_r->reg_rec_count = 2;
+ }
+ else
+ {
+ reg_v = reg_v | (bit (arm_insn_r->arm_insn, 7) << 4);
+ record_buf[0] = reg_v + ARM_D0_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ }
+ }
+ }
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+ return 0;
+}
+
+/* Record handler for extension register load/store instructions. */
+
+static int
+arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
+{
+ uint32_t opcode, single_reg;
+ uint8_t op_vldm_vstm;
+ uint32_t record_buf[8], record_buf_mem[128];
+ ULONGEST u_regval = 0;
+
+ struct regcache *reg_cache = arm_insn_r->regcache;
+
+ opcode = bits (arm_insn_r->arm_insn, 20, 24);
+ single_reg = !bit (arm_insn_r->arm_insn, 8);
+ op_vldm_vstm = opcode & 0x1b;
+
+ /* Handle VMOV instructions. */
+ if ((opcode & 0x1e) == 0x04)
+ {
+ if (bit (arm_insn_r->arm_insn, 20)) /* to_arm_registers bit 20? */
+ {
+ record_buf[0] = bits (arm_insn_r->arm_insn, 12, 15);
+ record_buf[1] = bits (arm_insn_r->arm_insn, 16, 19);
+ arm_insn_r->reg_rec_count = 2;
+ }
+ else
+ {
+ uint8_t reg_m = bits (arm_insn_r->arm_insn, 0, 3);
+ uint8_t bit_m = bit (arm_insn_r->arm_insn, 5);
+
+ if (single_reg)
+ {
+ /* The first S register number m is REG_M:M (M is bit 5),
+ the corresponding D register number is REG_M:M / 2, which
+ is REG_M. */
+ record_buf[arm_insn_r->reg_rec_count++] = ARM_D0_REGNUM + reg_m;
+ /* The second S register number is REG_M:M + 1, the
+ corresponding D register number is (REG_M:M + 1) / 2.
+ IOW, if bit M is 1, the first and second S registers
+ are mapped to different D registers, otherwise, they are
+ in the same D register. */
+ if (bit_m)
+ {
+ record_buf[arm_insn_r->reg_rec_count++]
+ = ARM_D0_REGNUM + reg_m + 1;
+ }
+ }
+ else
+ {
+ record_buf[0] = ((bit_m << 4) + reg_m + ARM_D0_REGNUM);
+ arm_insn_r->reg_rec_count = 1;
+ }
+ }
+ }
+ /* Handle VSTM and VPUSH instructions. */
+ else if (op_vldm_vstm == 0x08 || op_vldm_vstm == 0x0a
+ || op_vldm_vstm == 0x12)
+ {
+ uint32_t start_address, reg_rn, imm_off32, imm_off8, memory_count;
+ uint32_t memory_index = 0;
+
+ reg_rn = bits (arm_insn_r->arm_insn, 16, 19);
+ regcache_raw_read_unsigned (reg_cache, reg_rn, &u_regval);
+ imm_off8 = bits (arm_insn_r->arm_insn, 0, 7);
+ imm_off32 = imm_off8 << 2;
+ memory_count = imm_off8;
+
+ if (bit (arm_insn_r->arm_insn, 23))
+ start_address = u_regval;
+ else
+ start_address = u_regval - imm_off32;
+
+ if (bit (arm_insn_r->arm_insn, 21))
+ {
+ record_buf[0] = reg_rn;
+ arm_insn_r->reg_rec_count = 1;
+ }
+
+ while (memory_count > 0)
+ {
+ if (single_reg)
+ {
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ start_address = start_address + 4;
+ memory_index = memory_index + 2;
+ }
+ else
+ {
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ record_buf_mem[memory_index + 2] = 4;
+ record_buf_mem[memory_index + 3] = start_address + 4;
+ start_address = start_address + 8;
+ memory_index = memory_index + 4;
+ }
+ memory_count--;
+ }
+ arm_insn_r->mem_rec_count = (memory_index >> 1);
+ }
+ /* Handle VLDM instructions. */
+ else if (op_vldm_vstm == 0x09 || op_vldm_vstm == 0x0b
+ || op_vldm_vstm == 0x13)
+ {
+ uint32_t reg_count, reg_vd;
+ uint32_t reg_index = 0;
+ uint32_t bit_d = bit (arm_insn_r->arm_insn, 22);
+
+ reg_vd = bits (arm_insn_r->arm_insn, 12, 15);
+ reg_count = bits (arm_insn_r->arm_insn, 0, 7);
+
+ /* REG_VD is the first D register number. If the instruction
+ loads memory to S registers (SINGLE_REG is TRUE), the register
+ number is (REG_VD << 1 | bit D), so the corresponding D
+ register number is (REG_VD << 1 | bit D) / 2 = REG_VD. */
+ if (!single_reg)
+ reg_vd = reg_vd | (bit_d << 4);
+
+ if (bit (arm_insn_r->arm_insn, 21) /* write back */)
+ record_buf[reg_index++] = bits (arm_insn_r->arm_insn, 16, 19);
+
+ /* If the instruction loads memory to D register, REG_COUNT should
+ be divided by 2, according to the ARM Architecture Reference
+ Manual. If the instruction loads memory to S register, divide by
+ 2 as well because two S registers are mapped to D register. */
+ reg_count = reg_count / 2;
+ if (single_reg && bit_d)
+ {
+ /* Increase the register count if S register list starts from
+ an odd number (bit d is one). */
+ reg_count++;
+ }
+
+ while (reg_count > 0)
+ {
+ record_buf[reg_index++] = ARM_D0_REGNUM + reg_vd + reg_count - 1;
+ reg_count--;
+ }
+ arm_insn_r->reg_rec_count = reg_index;
+ }
+ /* VSTR Vector store register. */
+ else if ((opcode & 0x13) == 0x10)
+ {
+ uint32_t start_address, reg_rn, imm_off32, imm_off8;
+ uint32_t memory_index = 0;
+
+ reg_rn = bits (arm_insn_r->arm_insn, 16, 19);
+ regcache_raw_read_unsigned (reg_cache, reg_rn, &u_regval);
+ imm_off8 = bits (arm_insn_r->arm_insn, 0, 7);
+ imm_off32 = imm_off8 << 2;
+
+ if (bit (arm_insn_r->arm_insn, 23))
+ start_address = u_regval + imm_off32;
+ else
+ start_address = u_regval - imm_off32;
+
+ if (single_reg)
+ {
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ arm_insn_r->mem_rec_count = 1;
+ }
+ else
+ {
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ record_buf_mem[memory_index + 2] = 4;
+ record_buf_mem[memory_index + 3] = start_address + 4;
+ arm_insn_r->mem_rec_count = 2;
+ }
+ }
+ /* VLDR Vector load register. */
+ else if ((opcode & 0x13) == 0x11)
+ {
+ uint32_t reg_vd = bits (arm_insn_r->arm_insn, 12, 15);
+
+ if (!single_reg)
+ {
+ reg_vd = reg_vd | (bit (arm_insn_r->arm_insn, 22) << 4);
+ record_buf[0] = ARM_D0_REGNUM + reg_vd;
+ }
+ else
+ {
+ reg_vd = (reg_vd << 1) | bit (arm_insn_r->arm_insn, 22);
+ /* Record register D rather than pseudo register S. */
+ record_buf[0] = ARM_D0_REGNUM + reg_vd / 2;
+ }
+ arm_insn_r->reg_rec_count = 1;
+ }
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+ MEM_ALLOC (arm_insn_r->arm_mems, arm_insn_r->mem_rec_count, record_buf_mem);
+ return 0;
+}
+
+/* Record handler for arm/thumb mode VFP data processing instructions. */
+
+static int
+arm_record_vfp_data_proc_insn (insn_decode_record *arm_insn_r)
+{
+ uint32_t opc1, opc2, opc3, dp_op_sz, bit_d, reg_vd;
+ uint32_t record_buf[4];
+ enum insn_types {INSN_T0, INSN_T1, INSN_T2, INSN_T3, INSN_INV};
+ enum insn_types curr_insn_type = INSN_INV;
+
+ reg_vd = bits (arm_insn_r->arm_insn, 12, 15);
+ opc1 = bits (arm_insn_r->arm_insn, 20, 23);
+ opc2 = bits (arm_insn_r->arm_insn, 16, 19);
+ opc3 = bits (arm_insn_r->arm_insn, 6, 7);
+ dp_op_sz = bit (arm_insn_r->arm_insn, 8);
+ bit_d = bit (arm_insn_r->arm_insn, 22);
+ opc1 = opc1 & 0x04;
+
+ /* Handle VMLA, VMLS. */
+ if (opc1 == 0x00)
+ {
+ if (bit (arm_insn_r->arm_insn, 10))
+ {
+ if (bit (arm_insn_r->arm_insn, 6))
+ curr_insn_type = INSN_T0;
+ else
+ curr_insn_type = INSN_T1;
+ }
+ else
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ }
+ /* Handle VNMLA, VNMLS, VNMUL. */
+ else if (opc1 == 0x01)
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ /* Handle VMUL. */
+ else if (opc1 == 0x02 && !(opc3 & 0x01))
+ {
+ if (bit (arm_insn_r->arm_insn, 10))
+ {
+ if (bit (arm_insn_r->arm_insn, 6))
+ curr_insn_type = INSN_T0;
+ else
+ curr_insn_type = INSN_T1;
+ }
+ else
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ }
+ /* Handle VADD, VSUB. */
+ else if (opc1 == 0x03)
+ {
+ if (!bit (arm_insn_r->arm_insn, 9))
{
- register_bits = bits (arm_insn_r->arm_insn, 0, 15);
- no_of_regs = 15;
+ if (bit (arm_insn_r->arm_insn, 6))
+ curr_insn_type = INSN_T0;
+ else
+ curr_insn_type = INSN_T1;
}
else
{
- register_bits = bits (arm_insn_r->arm_insn, 0, 14);
- no_of_regs = 14;
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
}
- /* Get Rn. */
- reg_src1 = bits (arm_insn_r->arm_insn, 16, 19);
- while (register_bits)
- {
- if (register_bits & 0x00000001)
- record_buf[index++] = register_count;
- register_bits = register_bits >> 1;
- register_count++;
- }
-
- /* Extra space for Base Register and CPSR; wihtout optimization. */
- record_buf[index++] = reg_src1;
- record_buf[index++] = ARM_PS_REGNUM;
- arm_insn_r->reg_rec_count = index;
}
- else
+ /* Handle VDIV. */
+ else if (opc1 == 0x0b)
{
- /* It handles both STM(1) and STM(2). */
- addr_mode = bits (arm_insn_r->arm_insn, 23, 24);
-
- register_bits = bits (arm_insn_r->arm_insn, 0, 15);
- /* Get Rn. */
- reg_src1 = bits (arm_insn_r->arm_insn, 16, 19);
- regcache_raw_read_unsigned (reg_cache, reg_src1, &u_regval[0]);
- while (register_bits)
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ /* Handle all other vfp data processing instructions. */
+ else if (opc1 == 0x0b)
+ {
+ /* Handle VMOV. */
+ if (!(opc3 & 0x01) || (opc2 == 0x00 && opc3 == 0x01))
{
- if (register_bits & 0x00000001)
- register_count++;
- register_bits = register_bits >> 1;
+ if (bit (arm_insn_r->arm_insn, 4))
+ {
+ if (bit (arm_insn_r->arm_insn, 6))
+ curr_insn_type = INSN_T0;
+ else
+ curr_insn_type = INSN_T1;
+ }
+ else
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
}
-
- switch (addr_mode)
+ /* Handle VNEG and VABS. */
+ else if ((opc2 == 0x01 && opc3 == 0x01)
+ || (opc2 == 0x00 && opc3 == 0x03))
+ {
+ if (!bit (arm_insn_r->arm_insn, 11))
+ {
+ if (bit (arm_insn_r->arm_insn, 6))
+ curr_insn_type = INSN_T0;
+ else
+ curr_insn_type = INSN_T1;
+ }
+ else
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ }
+ /* Handle VSQRT. */
+ else if (opc2 == 0x01 && opc3 == 0x03)
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ /* Handle VCVT. */
+ else if (opc2 == 0x07 && opc3 == 0x03)
+ {
+ if (!dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ else if (opc3 & 0x01)
{
- /* Decrement after. */
- case 0:
- start_address = (u_regval[0]) - (register_count * 4) + 4;
- arm_insn_r->mem_rec_count = register_count;
- while (register_count)
- {
- record_buf_mem[(register_count * 2) - 1] = start_address;
- record_buf_mem[(register_count * 2) - 2] = 4;
- start_address = start_address + 4;
- register_count--;
- }
- break;
-
- /* Increment after. */
- case 1:
- start_address = u_regval[0];
- arm_insn_r->mem_rec_count = register_count;
- while (register_count)
- {
- record_buf_mem[(register_count * 2) - 1] = start_address;
- record_buf_mem[(register_count * 2) - 2] = 4;
- start_address = start_address + 4;
- register_count--;
- }
- break;
-
- /* Decrement before. */
- case 2:
-
- start_address = (u_regval[0]) - (register_count * 4);
- arm_insn_r->mem_rec_count = register_count;
- while (register_count)
- {
- record_buf_mem[(register_count * 2) - 1] = start_address;
- record_buf_mem[(register_count * 2) - 2] = 4;
- start_address = start_address + 4;
- register_count--;
- }
- break;
-
- /* Increment before. */
- case 3:
- start_address = u_regval[0] + 4;
- arm_insn_r->mem_rec_count = register_count;
- while (register_count)
- {
- record_buf_mem[(register_count * 2) - 1] = start_address;
- record_buf_mem[(register_count * 2) - 2] = 4;
- start_address = start_address + 4;
- register_count--;
- }
- break;
-
- default:
- gdb_assert_not_reached ("no decoding pattern found");
- break;
+ /* Handle VCVT. */
+ if ((opc2 == 0x08) || (opc2 & 0x0e) == 0x0c)
+ {
+ if (!bit (arm_insn_r->arm_insn, 18))
+ curr_insn_type = INSN_T2;
+ else
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ }
+ /* Handle VCVT. */
+ else if ((opc2 & 0x0e) == 0x0a || (opc2 & 0x0e) == 0x0e)
+ {
+ if (dp_op_sz)
+ curr_insn_type = INSN_T1;
+ else
+ curr_insn_type = INSN_T2;
+ }
+ /* Handle VCVTB, VCVTT. */
+ else if ((opc2 & 0x0e) == 0x02)
+ curr_insn_type = INSN_T2;
+ /* Handle VCMP, VCMPE. */
+ else if ((opc2 & 0x0e) == 0x04)
+ curr_insn_type = INSN_T3;
}
+ }
- /* Base register also changes; based on condition and W bit. */
- /* We save it anyway without optimization. */
- record_buf[0] = reg_src1;
- arm_insn_r->reg_rec_count = 1;
+ switch (curr_insn_type)
+ {
+ case INSN_T0:
+ reg_vd = reg_vd | (bit_d << 4);
+ record_buf[0] = reg_vd + ARM_D0_REGNUM;
+ record_buf[1] = reg_vd + ARM_D0_REGNUM + 1;
+ arm_insn_r->reg_rec_count = 2;
+ break;
+
+ case INSN_T1:
+ reg_vd = reg_vd | (bit_d << 4);
+ record_buf[0] = reg_vd + ARM_D0_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ break;
+
+ case INSN_T2:
+ reg_vd = (reg_vd << 1) | bit_d;
+ record_buf[0] = reg_vd + ARM_D0_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ break;
+
+ case INSN_T3:
+ record_buf[0] = ARM_FPSCR_REGNUM;
+ arm_insn_r->reg_rec_count = 1;
+ break;
+
+ default:
+ gdb_assert_not_reached ("no decoding pattern found");
+ break;
}
REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
- MEM_ALLOC (arm_insn_r->arm_mems, arm_insn_r->mem_rec_count, record_buf_mem);
return 0;
}
-/* Handling opcode 101 insns. */
+/* Handling opcode 110 insns. */
static int
-arm_record_b_bl (insn_decode_record *arm_insn_r)
+arm_record_asimd_vfp_coproc (insn_decode_record *arm_insn_r)
{
- uint32_t record_buf[8];
+ uint32_t op1, op1_ebit, coproc;
- /* Handle B, BL, BLX(1) insns. */
- /* B simply branches so we do nothing here. */
- /* Note: BLX(1) doesnt fall here but instead it falls into
- extension space. */
- if (bit (arm_insn_r->arm_insn, 24))
- {
- record_buf[0] = ARM_LR_REGNUM;
- arm_insn_r->reg_rec_count = 1;
- }
+ coproc = bits (arm_insn_r->arm_insn, 8, 11);
+ op1 = bits (arm_insn_r->arm_insn, 20, 25);
+ op1_ebit = bit (arm_insn_r->arm_insn, 20);
- REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, record_buf);
+ if ((coproc & 0x0e) == 0x0a)
+ {
+ /* Handle extension register ld/st instructions. */
+ if (!(op1 & 0x20))
+ return arm_record_exreg_ld_st_insn (arm_insn_r);
- return 0;
-}
+ /* 64-bit transfers between arm core and extension registers. */
+ if ((op1 & 0x3e) == 0x04)
+ return arm_record_exreg_ld_st_insn (arm_insn_r);
+ }
+ else
+ {
+ /* Handle coprocessor ld/st instructions. */
+ if (!(op1 & 0x3a))
+ {
+ /* Store. */
+ if (!op1_ebit)
+ return arm_record_unsupported_insn (arm_insn_r);
+ else
+ /* Load. */
+ return arm_record_unsupported_insn (arm_insn_r);
+ }
-/* Handling opcode 110 insns. */
+ /* Move to coprocessor from two arm core registers. */
+ if (op1 == 0x4)
+ return arm_record_unsupported_insn (arm_insn_r);
-static int
-arm_record_unsupported_insn (insn_decode_record *arm_insn_r)
-{
- printf_unfiltered (_("Process record does not support instruction "
- "0x%0x at address %s.\n"),arm_insn_r->arm_insn,
- paddress (arm_insn_r->gdbarch, arm_insn_r->this_addr));
+ /* Move to two arm core registers from coprocessor. */
+ if (op1 == 0x5)
+ {
+ uint32_t reg_t[2];
- return -1;
+ reg_t[0] = bits (arm_insn_r->arm_insn, 12, 15);
+ reg_t[1] = bits (arm_insn_r->arm_insn, 16, 19);
+ arm_insn_r->reg_rec_count = 2;
+
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, reg_t);
+ return 0;
+ }
+ }
+ return arm_record_unsupported_insn (arm_insn_r);
}
/* Handling opcode 111 insns. */
static int
arm_record_coproc_data_proc (insn_decode_record *arm_insn_r)
{
+ uint32_t op, op1_sbit, op1_ebit, coproc;
struct gdbarch_tdep *tdep = gdbarch_tdep (arm_insn_r->gdbarch);
struct regcache *reg_cache = arm_insn_r->regcache;
- uint32_t ret = 0; /* function return value: -1:record failure ; 0:success */
- ULONGEST u_regval = 0;
arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 24, 27);
+ coproc = bits (arm_insn_r->arm_insn, 8, 11);
+ op1_sbit = bit (arm_insn_r->arm_insn, 24);
+ op1_ebit = bit (arm_insn_r->arm_insn, 20);
+ op = bit (arm_insn_r->arm_insn, 4);
/* Handle arm SWI/SVC system call instructions. */
- if (15 == arm_insn_r->opcode)
+ if (op1_sbit)
{
if (tdep->arm_syscall_record != NULL)
{
else /* EABI. */
regcache_raw_read_unsigned (reg_cache, 7, &svc_number);
- ret = tdep->arm_syscall_record (reg_cache, svc_number);
+ return tdep->arm_syscall_record (reg_cache, svc_number);
}
else
{
printf_unfiltered (_("no syscall record support\n"));
- ret = -1;
+ return -1;
}
}
+
+ if ((coproc & 0x0e) == 0x0a)
+ {
+ /* VFP data-processing instructions. */
+ if (!op1_sbit && !op)
+ return arm_record_vfp_data_proc_insn (arm_insn_r);
+
+ /* Advanced SIMD, VFP instructions. */
+ if (!op1_sbit && op)
+ return arm_record_vdata_transfer_insn (arm_insn_r);
+ }
else
{
- arm_record_unsupported_insn (arm_insn_r);
- ret = -1;
+ /* Coprocessor data operations. */
+ if (!op1_sbit && !op)
+ return arm_record_unsupported_insn (arm_insn_r);
+
+ /* Move to Coprocessor from ARM core register. */
+ if (!op1_sbit && !op1_ebit && op)
+ return arm_record_unsupported_insn (arm_insn_r);
+
+ /* Move to arm core register from coprocessor. */
+ if (!op1_sbit && op1_ebit && op)
+ {
+ uint32_t record_buf[1];
+
+ record_buf[0] = bits (arm_insn_r->arm_insn, 12, 15);
+ if (record_buf[0] == 15)
+ record_buf[0] = ARM_PS_REGNUM;
+
+ arm_insn_r->reg_rec_count = 1;
+ REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count,
+ record_buf);
+ return 0;
+ }
}
- return ret;
+ return arm_record_unsupported_insn (arm_insn_r);
}
/* Handling opcode 000 insns. */
}
else
{
- /* Format 8; special data processing insns. */
- reg_src1 = bits (thumb_insn_r->arm_insn, 0, 2);
- record_buf[0] = ARM_PS_REGNUM;
- record_buf[1] = reg_src1;
+ /* Format 8; special data processing insns. */
+ record_buf[0] = ARM_PS_REGNUM;
+ record_buf[1] = (bit (thumb_insn_r->arm_insn, 7) << 3
+ | bits (thumb_insn_r->arm_insn, 0, 2));
thumb_insn_r->reg_rec_count = 2;
}
}
uint32_t opcode = 0, opcode1 = 0, opcode2 = 0;
uint32_t register_bits = 0, register_count = 0;
- uint32_t register_list[8] = {0}, index = 0, start_address = 0;
+ uint32_t index = 0, start_address = 0;
uint32_t record_buf[24], record_buf_mem[48];
uint32_t reg_src1;
uint32_t ret = 0; /* function return value: -1:record failure ; 0:success */
uint32_t reg_src1 = 0;
uint32_t opcode1 = 0, opcode2 = 0, register_bits = 0, register_count = 0;
- uint32_t register_list[8] = {0}, index = 0, start_address = 0;
+ uint32_t index = 0, start_address = 0;
uint32_t record_buf[24], record_buf_mem[48];
ULONGEST u_regval = 0;
uint32_t address, offset_addr;
uint32_t record_buf[8], record_buf_mem[8];
uint32_t op1, op2, op3;
- LONGEST s_word;
ULONGEST u_regval[2];
static int
thumb2_record_ld_word (insn_decode_record *thumb2_insn_r)
{
- uint32_t opcode1 = 0, opcode2 = 0;
uint32_t record_buf[8];
record_buf[0] = bits (thumb2_insn_r->arm_insn, 12, 15);
{
uint32_t opcode1 = 0, opcode2 = 0;
uint32_t record_buf[8];
- uint32_t reg_src1 = 0;
opcode1 = bits (thumb2_insn_r->arm_insn, 20, 22);
opcode2 = bits (thumb2_insn_r->arm_insn, 4, 7);
return ARM_RECORD_SUCCESS;
}
+/* Record handler for thumb32 coprocessor instructions. */
+
+static int
+thumb2_record_coproc_insn (insn_decode_record *thumb2_insn_r)
+{
+ if (bit (thumb2_insn_r->arm_insn, 25))
+ return arm_record_coproc_data_proc (thumb2_insn_r);
+ else
+ return arm_record_asimd_vfp_coproc (thumb2_insn_r);
+}
+
+/* Record handler for advance SIMD structure load/store instructions. */
+
+static int
+thumb2_record_asimd_struct_ld_st (insn_decode_record *thumb2_insn_r)
+{
+ struct regcache *reg_cache = thumb2_insn_r->regcache;
+ uint32_t l_bit, a_bit, b_bits;
+ uint32_t record_buf[128], record_buf_mem[128];
+ uint32_t reg_rn, reg_vd, address, f_elem;
+ uint32_t index_r = 0, index_e = 0, bf_regs = 0, index_m = 0, loop_t = 0;
+ uint8_t f_ebytes;
+
+ l_bit = bit (thumb2_insn_r->arm_insn, 21);
+ a_bit = bit (thumb2_insn_r->arm_insn, 23);
+ b_bits = bits (thumb2_insn_r->arm_insn, 8, 11);
+ reg_rn = bits (thumb2_insn_r->arm_insn, 16, 19);
+ reg_vd = bits (thumb2_insn_r->arm_insn, 12, 15);
+ reg_vd = (bit (thumb2_insn_r->arm_insn, 22) << 4) | reg_vd;
+ f_ebytes = (1 << bits (thumb2_insn_r->arm_insn, 6, 7));
+ f_elem = 8 / f_ebytes;
+
+ if (!l_bit)
+ {
+ ULONGEST u_regval = 0;
+ regcache_raw_read_unsigned (reg_cache, reg_rn, &u_regval);
+ address = u_regval;
+
+ if (!a_bit)
+ {
+ /* Handle VST1. */
+ if (b_bits == 0x02 || b_bits == 0x0a || (b_bits & 0x0e) == 0x06)
+ {
+ if (b_bits == 0x07)
+ bf_regs = 1;
+ else if (b_bits == 0x0a)
+ bf_regs = 2;
+ else if (b_bits == 0x06)
+ bf_regs = 3;
+ else if (b_bits == 0x02)
+ bf_regs = 4;
+ else
+ bf_regs = 0;
+
+ for (index_r = 0; index_r < bf_regs; index_r++)
+ {
+ for (index_e = 0; index_e < f_elem; index_e++)
+ {
+ record_buf_mem[index_m++] = f_ebytes;
+ record_buf_mem[index_m++] = address;
+ address = address + f_ebytes;
+ thumb2_insn_r->mem_rec_count += 1;
+ }
+ }
+ }
+ /* Handle VST2. */
+ else if (b_bits == 0x03 || (b_bits & 0x0e) == 0x08)
+ {
+ if (b_bits == 0x09 || b_bits == 0x08)
+ bf_regs = 1;
+ else if (b_bits == 0x03)
+ bf_regs = 2;
+ else
+ bf_regs = 0;
+
+ for (index_r = 0; index_r < bf_regs; index_r++)
+ for (index_e = 0; index_e < f_elem; index_e++)
+ {
+ for (loop_t = 0; loop_t < 2; loop_t++)
+ {
+ record_buf_mem[index_m++] = f_ebytes;
+ record_buf_mem[index_m++] = address + (loop_t * f_ebytes);
+ thumb2_insn_r->mem_rec_count += 1;
+ }
+ address = address + (2 * f_ebytes);
+ }
+ }
+ /* Handle VST3. */
+ else if ((b_bits & 0x0e) == 0x04)
+ {
+ for (index_e = 0; index_e < f_elem; index_e++)
+ {
+ for (loop_t = 0; loop_t < 3; loop_t++)
+ {
+ record_buf_mem[index_m++] = f_ebytes;
+ record_buf_mem[index_m++] = address + (loop_t * f_ebytes);
+ thumb2_insn_r->mem_rec_count += 1;
+ }
+ address = address + (3 * f_ebytes);
+ }
+ }
+ /* Handle VST4. */
+ else if (!(b_bits & 0x0e))
+ {
+ for (index_e = 0; index_e < f_elem; index_e++)
+ {
+ for (loop_t = 0; loop_t < 4; loop_t++)
+ {
+ record_buf_mem[index_m++] = f_ebytes;
+ record_buf_mem[index_m++] = address + (loop_t * f_ebytes);
+ thumb2_insn_r->mem_rec_count += 1;
+ }
+ address = address + (4 * f_ebytes);
+ }
+ }
+ }
+ else
+ {
+ uint8_t bft_size = bits (thumb2_insn_r->arm_insn, 10, 11);
+
+ if (bft_size == 0x00)
+ f_ebytes = 1;
+ else if (bft_size == 0x01)
+ f_ebytes = 2;
+ else if (bft_size == 0x02)
+ f_ebytes = 4;
+ else
+ f_ebytes = 0;
+
+ /* Handle VST1. */
+ if (!(b_bits & 0x0b) || b_bits == 0x08)
+ thumb2_insn_r->mem_rec_count = 1;
+ /* Handle VST2. */
+ else if ((b_bits & 0x0b) == 0x01 || b_bits == 0x09)
+ thumb2_insn_r->mem_rec_count = 2;
+ /* Handle VST3. */
+ else if ((b_bits & 0x0b) == 0x02 || b_bits == 0x0a)
+ thumb2_insn_r->mem_rec_count = 3;
+ /* Handle VST4. */
+ else if ((b_bits & 0x0b) == 0x03 || b_bits == 0x0b)
+ thumb2_insn_r->mem_rec_count = 4;
+
+ for (index_m = 0; index_m < thumb2_insn_r->mem_rec_count; index_m++)
+ {
+ record_buf_mem[index_m] = f_ebytes;
+ record_buf_mem[index_m] = address + (index_m * f_ebytes);
+ }
+ }
+ }
+ else
+ {
+ if (!a_bit)
+ {
+ /* Handle VLD1. */
+ if (b_bits == 0x02 || b_bits == 0x0a || (b_bits & 0x0e) == 0x06)
+ thumb2_insn_r->reg_rec_count = 1;
+ /* Handle VLD2. */
+ else if (b_bits == 0x03 || (b_bits & 0x0e) == 0x08)
+ thumb2_insn_r->reg_rec_count = 2;
+ /* Handle VLD3. */
+ else if ((b_bits & 0x0e) == 0x04)
+ thumb2_insn_r->reg_rec_count = 3;
+ /* Handle VLD4. */
+ else if (!(b_bits & 0x0e))
+ thumb2_insn_r->reg_rec_count = 4;
+ }
+ else
+ {
+ /* Handle VLD1. */
+ if (!(b_bits & 0x0b) || b_bits == 0x08 || b_bits == 0x0c)
+ thumb2_insn_r->reg_rec_count = 1;
+ /* Handle VLD2. */
+ else if ((b_bits & 0x0b) == 0x01 || b_bits == 0x09 || b_bits == 0x0d)
+ thumb2_insn_r->reg_rec_count = 2;
+ /* Handle VLD3. */
+ else if ((b_bits & 0x0b) == 0x02 || b_bits == 0x0a || b_bits == 0x0e)
+ thumb2_insn_r->reg_rec_count = 3;
+ /* Handle VLD4. */
+ else if ((b_bits & 0x0b) == 0x03 || b_bits == 0x0b || b_bits == 0x0f)
+ thumb2_insn_r->reg_rec_count = 4;
+
+ for (index_r = 0; index_r < thumb2_insn_r->reg_rec_count; index_r++)
+ record_buf[index_r] = reg_vd + ARM_D0_REGNUM + index_r;
+ }
+ }
+
+ if (bits (thumb2_insn_r->arm_insn, 0, 3) != 15)
+ {
+ record_buf[index_r] = reg_rn;
+ thumb2_insn_r->reg_rec_count += 1;
+ }
+
+ REG_ALLOC (thumb2_insn_r->arm_regs, thumb2_insn_r->reg_rec_count,
+ record_buf);
+ MEM_ALLOC (thumb2_insn_r->arm_mems, thumb2_insn_r->mem_rec_count,
+ record_buf_mem);
+ return 0;
+}
+
/* Decodes thumb2 instruction type and invokes its record handler. */
static unsigned int
else if (op2 & 0x40)
{
/* Co-processor instructions. */
- arm_record_unsupported_insn (thumb2_insn_r);
+ return thumb2_record_coproc_insn (thumb2_insn_r);
}
}
else if (op1 == 0x02)
else if (!((op2 & 0x71) ^ 0x10))
{
/* Advanced SIMD or structure load/store instructions. */
- return arm_record_unsupported_insn (thumb2_insn_r);
+ return thumb2_record_asimd_struct_ld_st (thumb2_insn_r);
}
else if (!((op2 & 0x67) ^ 0x01))
{
else if (op2 & 0x40)
{
/* Co-processor instructions. */
- return arm_record_unsupported_insn (thumb2_insn_r);
+ return thumb2_record_coproc_insn (thumb2_insn_r);
}
}
return 1;
insn_record->arm_insn = (uint32_t) extract_unsigned_integer (&buf[0],
insn_size,
- gdbarch_byte_order (insn_record->gdbarch));
+ gdbarch_byte_order_for_code (insn_record->gdbarch));
return 0;
}
static int
decode_insn (insn_decode_record *arm_record, record_type_t record_type,
- uint32_t insn_size)
+ uint32_t insn_size)
{
- /* (Starting from numerical 0); bits 25, 26, 27 decodes type of arm instruction. */
- static const sti_arm_hdl_fp_t const arm_handle_insn[8] =
+ /* (Starting from numerical 0); bits 25, 26, 27 decodes type of arm
+ instruction. */
+ static const sti_arm_hdl_fp_t arm_handle_insn[8] =
{
arm_record_data_proc_misc_ld_str, /* 000. */
arm_record_data_proc_imm, /* 001. */
arm_record_ld_st_reg_offset, /* 011. */
arm_record_ld_st_multiple, /* 100. */
arm_record_b_bl, /* 101. */
- arm_record_unsupported_insn, /* 110. */
+ arm_record_asimd_vfp_coproc, /* 110. */
arm_record_coproc_data_proc /* 111. */
};
- /* (Starting from numerical 0); bits 13,14,15 decodes type of thumb instruction. */
- static const sti_arm_hdl_fp_t const thumb_handle_insn[8] =
+ /* (Starting from numerical 0); bits 13,14,15 decodes type of thumb
+ instruction. */
+ static const sti_arm_hdl_fp_t thumb_handle_insn[8] =
{ \
thumb_record_shift_add_sub, /* 000. */
thumb_record_add_sub_cmp_mov, /* 001. */
if (extract_arm_insn (arm_record, insn_size))
{
if (record_debug)
- {
- printf_unfiltered (_("Process record: error reading memory at "
- "addr %s len = %d.\n"),
- paddress (arm_record->gdbarch, arm_record->this_addr), insn_size);
- }
+ {
+ printf_unfiltered (_("Process record: error reading memory at "
+ "addr %s len = %d.\n"),
+ paddress (arm_record->gdbarch,
+ arm_record->this_addr), insn_size);
+ }
return -1;
}
else if (ARM_RECORD == record_type)
{
arm_record->cond = bits (arm_record->arm_insn, 28, 31);
insn_id = bits (arm_record->arm_insn, 25, 27);
- ret = arm_record_extension_space (arm_record);
- /* If this insn has fallen into extension space
- then we need not decode it anymore. */
- if (ret != -1 && !INSN_RECORDED(arm_record))
- {
- ret = arm_handle_insn[insn_id] (arm_record);
- }
+
+ if (arm_record->cond == 0xf)
+ ret = arm_record_extension_space (arm_record);
+ else
+ {
+ /* If this insn has fallen into extension space
+ then we need not decode it anymore. */
+ ret = arm_handle_insn[insn_id] (arm_record);
+ }
+ if (ret != ARM_RECORD_SUCCESS)
+ {
+ arm_record_unsupported_insn (arm_record);
+ ret = -1;
+ }
}
else if (THUMB_RECORD == record_type)
{
arm_record->cond = -1;
insn_id = bits (arm_record->arm_insn, 13, 15);
ret = thumb_handle_insn[insn_id] (arm_record);
+ if (ret != ARM_RECORD_SUCCESS)
+ {
+ arm_record_unsupported_insn (arm_record);
+ ret = -1;
+ }
}
else if (THUMB2_RECORD == record_type)
{
/* Swap first half of 32bit thumb instruction with second half. */
arm_record->arm_insn
- = (arm_record->arm_insn >> 16) | (arm_record->arm_insn << 16);
+ = (arm_record->arm_insn >> 16) | (arm_record->arm_insn << 16);
- insn_id = thumb2_record_decode_insn_handler (arm_record);
+ ret = thumb2_record_decode_insn_handler (arm_record);
- if (insn_id != ARM_RECORD_SUCCESS)
- {
- arm_record_unsupported_insn (arm_record);
- ret = -1;
- }
+ if (ret != ARM_RECORD_SUCCESS)
+ {
+ arm_record_unsupported_insn (arm_record);
+ ret = -1;
+ }
}
else
{
}
-/* Parse the current instruction and record the values of the registers and
+/* Parse the current instruction and record the values of the registers and
memory that will be changed in current instruction to record_arch_list".
Return -1 if something is wrong. */
int
-arm_process_record (struct gdbarch *gdbarch, struct regcache *regcache,
- CORE_ADDR insn_addr)
+arm_process_record (struct gdbarch *gdbarch, struct regcache *regcache,
+ CORE_ADDR insn_addr)
{
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
uint32_t no_of_rec = 0;
uint32_t ret = 0; /* return value: -1:record failure ; 0:success */
ULONGEST t_bit = 0, insn_id = 0;
if (record_debug > 1)
{
fprintf_unfiltered (gdb_stdlog, "Process record: arm_process_record "
- "addr = %s\n",
+ "addr = %s\n",
paddress (gdbarch, arm_record.this_addr));
}
if (extract_arm_insn (&arm_record, 2))
{
if (record_debug)
- {
- printf_unfiltered (_("Process record: error reading memory at "
- "addr %s len = %d.\n"),
- paddress (arm_record.gdbarch,
- arm_record.this_addr), 2);
- }
+ {
+ printf_unfiltered (_("Process record: error reading memory at "
+ "addr %s len = %d.\n"),
+ paddress (arm_record.gdbarch,
+ arm_record.this_addr), 2);
+ }
return -1;
}
insn_id = bits (arm_record.arm_insn, 11, 15);
/* is it thumb2 insn? */
if ((0x1D == insn_id) || (0x1E == insn_id) || (0x1F == insn_id))
- {
- ret = decode_insn (&arm_record, THUMB2_RECORD,
- THUMB2_INSN_SIZE_BYTES);
- }
+ {
+ ret = decode_insn (&arm_record, THUMB2_RECORD,
+ THUMB2_INSN_SIZE_BYTES);
+ }
else
- {
- /* We are decoding thumb insn. */
- ret = decode_insn (&arm_record, THUMB_RECORD, THUMB_INSN_SIZE_BYTES);
- }
+ {
+ /* We are decoding thumb insn. */
+ ret = decode_insn (&arm_record, THUMB_RECORD, THUMB_INSN_SIZE_BYTES);
+ }
}
if (0 == ret)
/* Record registers. */
record_full_arch_list_add_reg (arm_record.regcache, ARM_PC_REGNUM);
if (arm_record.arm_regs)
- {
- for (no_of_rec = 0; no_of_rec < arm_record.reg_rec_count; no_of_rec++)
- {
- if (record_full_arch_list_add_reg
+ {
+ for (no_of_rec = 0; no_of_rec < arm_record.reg_rec_count; no_of_rec++)
+ {
+ if (record_full_arch_list_add_reg
(arm_record.regcache , arm_record.arm_regs[no_of_rec]))
- ret = -1;
- }
- }
+ ret = -1;
+ }
+ }
/* Record memories. */
if (arm_record.arm_mems)
- {
- for (no_of_rec = 0; no_of_rec < arm_record.mem_rec_count; no_of_rec++)
- {
- if (record_full_arch_list_add_mem
- ((CORE_ADDR)arm_record.arm_mems[no_of_rec].addr,
+ {
+ for (no_of_rec = 0; no_of_rec < arm_record.mem_rec_count; no_of_rec++)
+ {
+ if (record_full_arch_list_add_mem
+ ((CORE_ADDR)arm_record.arm_mems[no_of_rec].addr,
arm_record.arm_mems[no_of_rec].len))
- ret = -1;
- }
- }
+ ret = -1;
+ }
+ }
if (record_full_arch_list_add_end ())
- ret = -1;
+ ret = -1;
}
return ret;
}
-
projects / thirdparty / binutils-gdb.git / blobdiff