You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-#include <ctype.h> /* XXX for isupper () */
+#include <ctype.h> /* XXX for isupper (). */
#include "defs.h"
#include "frame.h"
#include "gdbcmd.h"
#include "gdbcore.h"
#include "gdb_string.h"
-#include "dis-asm.h" /* For register styles. */
+#include "dis-asm.h" /* For register styles. */
#include "regcache.h"
#include "reggroups.h"
#include "doublest.h"
MSYMBOL_SET_SPECIAL Actually sets the "special" bit.
MSYMBOL_IS_SPECIAL Tests the "special" bit in a minimal symbol. */
-#define MSYMBOL_SET_SPECIAL(msym) \
+#define MSYMBOL_SET_SPECIAL(msym) \
MSYMBOL_TARGET_FLAG_1 (msym) = 1
#define MSYMBOL_IS_SPECIAL(msym) \
break;
}
- else if ((insn & 0xffd0) == 0xe900 /* stmdb Rn{!}, { registers } */
+ else if ((insn & 0xffd0) == 0xe900 /* stmdb Rn{!},
+ { registers } */
&& pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
{
pv_t addr = regs[bits (insn, 0, 3)];
regs[bits (insn, 0, 3)] = addr;
}
- else if ((insn & 0xff50) == 0xe940 /* strd Rt, Rt2, [Rn, #+/-imm]{!} */
+ else if ((insn & 0xff50) == 0xe940 /* strd Rt, Rt2,
+ [Rn, #+/-imm]{!} */
&& pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
{
int regno1 = bits (inst2, 12, 15);
/* Ignore stores of argument registers to the stack. */
;
- else if ((insn & 0xffd0) == 0xe890 /* ldmia Rn[!], { registers } */
+ else if ((insn & 0xffd0) == 0xe890 /* ldmia Rn[!],
+ { registers } */
&& (inst2 & 0x8000) == 0x0000
&& pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
/* Ignore block loads from the stack, potentially copying
parameters from memory. */
;
- else if ((insn & 0xffb0) == 0xe950 /* ldrd Rt, Rt2, [Rn, #+/-imm] */
+ else if ((insn & 0xffb0) == 0xe950 /* ldrd Rt, Rt2,
+ [Rn, #+/-imm] */
&& pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
/* Similarly ignore dual loads from the stack. */
;
}
/* Try to skip a sequence of instructions used for stack protector. If PC
- points to the first instruction of this sequence, return the address of first
- instruction after this sequence, otherwise, return original PC.
+ points to the first instruction of this sequence, return the address of
+ first instruction after this sequence, otherwise, return original PC.
On arm, this sequence of instructions is composed of mainly three steps,
Step 1: load symbol __stack_chk_guard,
[stfe f6, [sp, #-12]!]
[stfe f5, [sp, #-12]!]
[stfe f4, [sp, #-12]!]
- sub fp, ip, #nn @@ nn == 20 or 4 depending on second insn */
+ sub fp, ip, #nn @@ nn == 20 or 4 depending on second insn. */
static CORE_ADDR
arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
/* Find an upper limit on the function prologue using the debug
information. If the debug information could not be used to provide
that bound, then use an arbitrary large number as the upper bound. */
- /* Like arm_scan_prologue, stop no later than pc + 64. */
+ /* Like arm_scan_prologue, stop no later than pc + 64. */
limit_pc = skip_prologue_using_sal (gdbarch, pc);
if (limit_pc == 0)
limit_pc = pc + 64; /* Magic. */
break;
}
- return skip_pc; /* End of prologue */
+ return skip_pc; /* End of prologue. */
}
/* *INDENT-OFF* */
R7 -> 0 local variables (16 bytes)
SP -> -12 additional stack space (12 bytes)
The frame size would thus be 36 bytes, and the frame offset would be
- 12 bytes. The frame register is R7.
+ 12 bytes. The frame register is R7.
The comments for thumb_skip_prolog() describe the algorithm we use
to detect the end of the prolog. */
regs[rd] = pv_add_constant (regs[bits (insn, 16, 19)], -imm);
continue;
}
- else if ((insn & 0xffff0fff) == 0xe52d0004) /* str Rd, [sp, #-4]! */
+ else if ((insn & 0xffff0fff) == 0xe52d0004) /* str Rd,
+ [sp, #-4]! */
{
if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
break;
for (regno = ARM_PC_REGNUM; regno >= 0; regno--)
if (mask & (1 << regno))
{
- regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -4);
+ regs[ARM_SP_REGNUM]
+ = pv_add_constant (regs[ARM_SP_REGNUM], -4);
pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[regno]);
}
}
/* No need to add this to saved_regs -- it's just an arg reg. */
continue;
}
- else if ((insn & 0xfff00000) == 0xe8800000 /* stm Rn, { registers } */
+ else if ((insn & 0xfff00000) == 0xe8800000 /* stm Rn,
+ { registers } */
&& pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
{
/* No need to add this to saved_regs -- it's just arg regs. */
imm = (imm >> rot) | (imm << (32 - rot));
regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -imm);
}
- else if ((insn & 0xffff7fff) == 0xed6d0103 /* stfe f?, [sp, -#c]! */
+ else if ((insn & 0xffff7fff) == 0xed6d0103 /* stfe f?,
+ [sp, -#c]! */
&& gdbarch_tdep (gdbarch)->have_fpa_registers)
{
if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
regno = ARM_F0_REGNUM + ((insn >> 12) & 0x07);
pv_area_store (stack, regs[ARM_SP_REGNUM], 12, regs[regno]);
}
- else if ((insn & 0xffbf0fff) == 0xec2d0200 /* sfmfd f0, 4, [sp!] */
+ else if ((insn & 0xffbf0fff) == 0xec2d0200 /* sfmfd f0, 4,
+ [sp!] */
&& gdbarch_tdep (gdbarch)->have_fpa_registers)
{
int n_saved_fp_regs;
break;
}
else if ((insn & 0xf0000000) != 0xe0000000)
- break; /* Condition not true, exit early */
+ break; /* Condition not true, exit early. */
else if (arm_instruction_changes_pc (insn))
/* Don't scan past anything that might change control flow. */
break;
static struct frame_id
arm_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
- return frame_id_build (get_frame_register_unsigned (this_frame, ARM_SP_REGNUM),
+ return frame_id_build (get_frame_register_unsigned (this_frame,
+ ARM_SP_REGNUM),
get_frame_pc (this_frame));
}
exception of return itself, updates the stack pointer, we need to
scan backwards for at most one instruction. Try either a 16-bit or
a 32-bit instruction. This is just a heuristic, so we do not worry
- too much about false positives.*/
+ too much about false positives. */
if (!found_stack_adjust)
{
{
int nbits;
for (nbits = 0; val != 0; nbits++)
- val &= val - 1; /* delete rightmost 1-bit in val */
+ val &= val - 1; /* Delete rightmost 1-bit in val. */
return nbits;
}
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
unsigned short inst1;
- CORE_ADDR nextpc = pc + 2; /* default is next instruction */
+ CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
unsigned long offset;
ULONGEST status, itstate;
while (itstate != 0 && ! condition_true (itstate >> 4, status))
{
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
+ inst1 = read_memory_unsigned_integer (pc, 2,
+ byte_order_for_code);
pc += thumb_insn_size (inst1);
itstate = thumb_advance_itstate (itstate);
}
while (itstate != 0 && ! condition_true (itstate >> 4, status))
{
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
+ inst1 = read_memory_unsigned_integer (pc, 2,
+ byte_order_for_code);
pc += thumb_insn_size (inst1);
itstate = thumb_advance_itstate (itstate);
}
the instruction after the IT block. */
do
{
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
+ inst1 = read_memory_unsigned_integer (pc, 2,
+ byte_order_for_code);
pc += thumb_insn_size (inst1);
itstate = thumb_advance_itstate (itstate);
}
The value returned has the execution state of the next instruction
encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
- address.
-*/
+ address. */
+
static CORE_ADDR
arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc, int insert_bkpt)
{
return nextpc;
}
- /* Multiply into PC */
+ /* Multiply into PC. */
c = (status & FLAG_C) ? 1 : 0;
rn = bits (this_instr, 16, 19);
operand1 = (rn == 15) ? pc_val + 8
operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
& 0xffffffff;
}
- else /* operand 2 is a shifted register */
- operand2 = shifted_reg_val (frame, this_instr, c, pc_val, status);
+ else /* operand 2 is a shifted register. */
+ operand2 = shifted_reg_val (frame, this_instr, c,
+ pc_val, status);
switch (bits (this_instr, 21, 24))
{
known boundary. */
if (! definite)
{
- buf = extend_buffer_earlier (buf, bpaddr, buf_len, bpaddr - boundary);
+ buf = extend_buffer_earlier (buf, bpaddr, buf_len,
+ bpaddr - boundary);
if (buf == NULL)
return bpaddr;
buf_len = bpaddr - boundary;
arm_process_displaced_insn (called from arm_displaced_step_copy_insn).
Depending on the type of instruction, it is then copied to a scratch
location, possibly in a modified form. The copy_* set of functions
- performs such modification, as necessary. A breakpoint is placed after
+ performs such modification, as necessary. A breakpoint is placed after
the modified instruction in the scratch space to return control to GDB.
Note in particular that instructions which modify the PC will no longer
do so after modification.
if (displaced_in_arm_mode (regs))
/* Note: If bits 0/1 are set, this branch would be unpredictable for
architecture versions < 6. */
- regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM, val & ~(ULONGEST) 0x3);
+ regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM,
+ val & ~(ULONGEST) 0x3);
else
- regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM, val & ~(ULONGEST) 0x1);
+ regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM,
+ val & ~(ULONGEST) 0x1);
}
/* Write to the PC as from a branch-exchange instruction. */
/* This function is used to concisely determine if an instruction INSN
references PC. Register fields of interest in INSN should have the
- corresponding fields of BITMASK set to 0b1111. The function returns return 1
- if any of these fields in INSN reference the PC (also 0b1111, r15), else it
- returns 0. */
+ corresponding fields of BITMASK set to 0b1111. The function
+ returns return 1 if any of these fields in INSN reference the PC
+ (also 0b1111, r15), else it returns 0. */
static int
insn_references_pc (uint32_t insn, uint32_t bitmask)
/* Preload instructions with register offset. */
static int
-copy_preload_reg (struct gdbarch *gdbarch, uint32_t insn, struct regcache *regs,
+copy_preload_reg (struct gdbarch *gdbarch, uint32_t insn,
+ struct regcache *regs,
struct displaced_step_closure *dsc)
{
unsigned int rn = bits (insn, 16, 19);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "displaced: copying %s register insn "
- "%.8lx\n", (link) ? "blx" : "bx", (unsigned long) insn);
+ "%.8lx\n", (link) ? "blx" : "bx",
+ (unsigned long) insn);
/* Implement {BX,BLX}<cond> <reg>" as:
return 0;
}
-/* Copy/cleanup arithmetic/logic instruction with immediate RHS. */
+/* Copy/cleanup arithmetic/logic instruction with immediate RHS. */
static void
cleanup_alu_imm (struct gdbarch *gdbarch,
static int
copy_alu_shifted_reg (struct gdbarch *gdbarch, uint32_t insn,
- struct regcache *regs, struct displaced_step_closure *dsc)
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
{
unsigned int rn = bits (insn, 16, 19);
unsigned int rm = bits (insn, 0, 3);
int rn = bits (insn, 16, 19);
CORE_ADDR from = dsc->insn_addr;
- /* Block transfers which don't mention PC can be run directly out-of-line. */
+ /* Block transfers which don't mention PC can be run directly
+ out-of-line. */
if (rn != 15 && (insn & 0x8000) == 0)
return copy_unmodified (gdbarch, insn, "ldm/stm", dsc);
if (rn == 15)
{
- warning (_("displaced: Unpredictable LDM or STM with base register r15"));
+ warning (_("displaced: Unpredictable LDM or STM with "
+ "base register r15"));
return copy_unmodified (gdbarch, insn, "unpredictable ldm/stm", dsc);
}
struct displaced_step_closure *dsc)
{
if (debug_displaced)
- fprintf_unfiltered (gdb_stdlog, "displaced: copying undefined insn %.8lx\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: copying undefined insn %.8lx\n",
(unsigned long) insn);
dsc->modinsn[0] = insn;
static int
decode_unconditional (struct gdbarch *gdbarch, uint32_t insn,
- struct regcache *regs, struct displaced_step_closure *dsc)
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
{
if (bit (insn, 27) == 0)
return decode_misc_memhint_neon (gdbarch, insn, regs, dsc);
static int
decode_miscellaneous (struct gdbarch *gdbarch, uint32_t insn,
- struct regcache *regs, struct displaced_step_closure *dsc)
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
{
unsigned int op2 = bits (insn, 4, 6);
unsigned int op = bits (insn, 21, 22);
case 0x3:
if (op == 0x1)
- return copy_bx_blx_reg (gdbarch, insn, regs, dsc); /* blx register. */
+ return copy_bx_blx_reg (gdbarch, insn,
+ regs, dsc); /* blx register. */
else
return copy_undef (gdbarch, insn, dsc);
static int
decode_ext_reg_ld_st (struct gdbarch *gdbarch, uint32_t insn,
- struct regcache *regs, struct displaced_step_closure *dsc)
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
{
unsigned int opcode = bits (insn, 20, 24);
void
arm_process_displaced_insn (struct gdbarch *gdbarch, uint32_t insn,
- CORE_ADDR from, CORE_ADDR to, struct regcache *regs,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs,
struct displaced_step_closure *dsc)
{
int err = 0;
1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
C C C C 0 1 1 x x x x x x x x x x x x x x x x x x x x 1 x x x x
- Even this may only true if the condition predicate is true. The
+ Even this may only true if the condition predicate is true. The
following use a condition predicate of ALWAYS so it is always TRUE.
There are other ways of forcing a breakpoint. GNU/Linux, RISC iX,
break;
default:
- internal_error
- (__FILE__, __LINE__,
- _("arm_extract_return_value: Floating point model not supported"));
+ internal_error (__FILE__, __LINE__,
+ _("arm_extract_return_value: "
+ "Floating point model not supported"));
break;
}
}
for (i = 0; i < TYPE_NFIELDS (type); i++)
{
enum type_code field_type_code;
- field_type_code = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, i)));
+ field_type_code = TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type,
+ i)));
/* Is it a floating point type field? */
if (field_type_code == TYPE_CODE_FLT)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
- fprintf_filtered (file, _("\
-The current execution mode assumed (when symbols are unavailable) is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("The current execution mode assumed "
+ "(when symbols are unavailable) is \"%s\".\n"),
arm_fallback_mode_string);
}
{
struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
- fprintf_filtered (file, _("\
-The current execution mode assumed (even when symbols are available) is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("The current execution mode assumed "
+ "(even when symbols are available) is \"%s\".\n"),
arm_force_mode_string);
}
not. */
attr_arch = bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_PROC,
Tag_CPU_arch);
- attr_profile = bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_PROC,
+ attr_profile = bfd_elf_get_obj_attr_int (info.abfd,
+ OBJ_ATTR_PROC,
Tag_CPU_arch_profile);
/* GCC specifies the profile for v6-M; RealView only
specifies the profile for architectures starting with
_("Show the disassembly style."),
helptext,
set_disassembly_style_sfunc,
- NULL, /* FIXME: i18n: The disassembly style is \"%s\". */
+ NULL, /* FIXME: i18n: The disassembly style is
+ \"%s\". */
&setarmcmdlist, &showarmcmdlist);
add_setshow_boolean_cmd ("apcs32", no_class, &arm_apcs_32,
_("Show usage of ARM 32-bit mode."),
_("When off, a 26-bit PC will be used."),
NULL,
- NULL, /* FIXME: i18n: Usage of ARM 32-bit mode is %s. */
+ NULL, /* FIXME: i18n: Usage of ARM 32-bit
+ mode is %s. */
&setarmcmdlist, &showarmcmdlist);
/* Add a command to allow the user to force the FPU model. */
projects / thirdparty / binutils-gdb.git / blobdiff