/* Low level interface to ptrace, for the remote server for GDB.
- Copyright (C) 1995-2015 Free Software Foundation, Inc.
+ Copyright (C) 1995-2016 Free Software Foundation, Inc.
This file is part of GDB.
#include "agent.h"
#include "tdesc.h"
#include "rsp-low.h"
-
+#include "signals-state-save-restore.h"
#include "nat/linux-nat.h"
#include "nat/linux-waitpid.h"
#include "gdb_wait.h"
#include "filestuff.h"
#include "tracepoint.h"
#include "hostio.h"
+#include <inttypes.h>
#ifndef ELFMAG0
/* Don't include <linux/elf.h> here. If it got included by gdb_proc_service.h
then ELFMAG0 will have been defined. If it didn't get included by
#define O_LARGEFILE 0
#endif
-#ifndef W_STOPCODE
-#define W_STOPCODE(sig) ((sig) << 8 | 0x7f)
-#endif
-
-/* This is the kernel's hard limit. Not to be confused with
- SIGRTMIN. */
-#ifndef __SIGRTMIN
-#define __SIGRTMIN 32
-#endif
-
/* Some targets did not define these ptrace constants from the start,
so gdbserver defines them locally here. In the future, these may
be removed after they are added to asm/ptrace.h. */
return lwp->stop_reason;
}
+/* See nat/linux-nat.h. */
+
+int
+lwp_is_stepping (struct lwp_info *lwp)
+{
+ return lwp->stepping;
+}
+
/* A list of all unknown processes which receive stop signals. Some
other process will presumably claim each of these as forked
children momentarily. */
static void
add_to_pid_list (struct simple_pid_list **listp, int pid, int status)
{
- struct simple_pid_list *new_pid = xmalloc (sizeof (struct simple_pid_list));
+ struct simple_pid_list *new_pid = XNEW (struct simple_pid_list);
new_pid->pid = pid;
new_pid->status = status;
static void linux_resume (struct thread_resume *resume_info, size_t n);
static void stop_all_lwps (int suspend, struct lwp_info *except);
static void unstop_all_lwps (int unsuspend, struct lwp_info *except);
+static void unsuspend_all_lwps (struct lwp_info *except);
static int linux_wait_for_event_filtered (ptid_t wait_ptid, ptid_t filter_ptid,
int *wstat, int options);
static int linux_wait_for_event (ptid_t ptid, int *wstat, int options);
static struct lwp_info *add_lwp (ptid_t ptid);
+static void linux_mourn (struct process_info *process);
static int linux_stopped_by_watchpoint (void);
static void mark_lwp_dead (struct lwp_info *lwp, int wstat);
static int lwp_is_marked_dead (struct lwp_info *lwp);
static int kill_lwp (unsigned long lwpid, int signo);
static void enqueue_pending_signal (struct lwp_info *lwp, int signal, siginfo_t *info);
static void complete_ongoing_step_over (void);
+static int linux_low_ptrace_options (int attached);
+static int check_ptrace_stopped_lwp_gone (struct lwp_info *lp);
+static int proceed_one_lwp (struct inferior_list_entry *entry, void *except);
/* When the event-loop is doing a step-over, this points at the thread
being stepped. */
ptid_t step_over_bkpt;
-/* True if the low target can hardware single-step. Such targets
- don't need a BREAKPOINT_REINSERT_ADDR callback. */
+/* True if the low target can hardware single-step. */
static int
can_hardware_single_step (void)
{
- return (the_low_target.breakpoint_reinsert_addr == NULL);
+ if (the_low_target.supports_hardware_single_step != NULL)
+ return the_low_target.supports_hardware_single_step ();
+ else
+ return 0;
+}
+
+/* True if the low target can software single-step. Such targets
+ implement the GET_NEXT_PCS callback. */
+
+static int
+can_software_single_step (void)
+{
+ return (the_low_target.get_next_pcs != NULL);
}
/* True if the low target supports memory breakpoints. If so, we'll
struct process_info *proc;
proc = add_process (pid, attached);
- proc->priv = xcalloc (1, sizeof (*proc->priv));
+ proc->priv = XCNEW (struct process_info_private);
if (the_low_target.new_process != NULL)
proc->priv->arch_private = the_low_target.new_process ();
static CORE_ADDR get_pc (struct lwp_info *lwp);
-/* Handle a GNU/Linux extended wait response. If we see a clone
- event, we need to add the new LWP to our list (and return 0 so as
- not to report the trap to higher layers). */
+/* Call the target arch_setup function on the current thread. */
+
+static void
+linux_arch_setup (void)
+{
+ the_low_target.arch_setup ();
+}
+
+/* Call the target arch_setup function on THREAD. */
+
+static void
+linux_arch_setup_thread (struct thread_info *thread)
+{
+ struct thread_info *saved_thread;
+
+ saved_thread = current_thread;
+ current_thread = thread;
+
+ linux_arch_setup ();
+
+ current_thread = saved_thread;
+}
+
+/* Handle a GNU/Linux extended wait response. If we see a clone,
+ fork, or vfork event, we need to add the new LWP to our list
+ (and return 0 so as not to report the trap to higher layers).
+ If we see an exec event, we will modify ORIG_EVENT_LWP to point
+ to a new LWP representing the new program. */
static int
-handle_extended_wait (struct lwp_info *event_lwp, int wstat)
+handle_extended_wait (struct lwp_info **orig_event_lwp, int wstat)
{
+ struct lwp_info *event_lwp = *orig_event_lwp;
int event = linux_ptrace_get_extended_event (wstat);
struct thread_info *event_thr = get_lwp_thread (event_lwp);
struct lwp_info *new_lwp;
+ gdb_assert (event_lwp->waitstatus.kind == TARGET_WAITKIND_IGNORE);
+
+ /* All extended events we currently use are mid-syscall. Only
+ PTRACE_EVENT_STOP is delivered more like a signal-stop, but
+ you have to be using PTRACE_SEIZE to get that. */
+ event_lwp->syscall_state = TARGET_WAITKIND_SYSCALL_ENTRY;
+
if ((event == PTRACE_EVENT_FORK) || (event == PTRACE_EVENT_VFORK)
|| (event == PTRACE_EVENT_CLONE))
{
child_thr->last_status.kind = TARGET_WAITKIND_STOPPED;
/* If we're suspending all threads, leave this one suspended
- too. */
- if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ too. If the fork/clone parent is stepping over a breakpoint,
+ all other threads have been suspended already. Leave the
+ child suspended too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS
+ || event_lwp->bp_reinsert != 0)
{
if (debug_threads)
debug_printf ("HEW: leaving child suspended\n");
parent_proc = get_thread_process (event_thr);
child_proc->attached = parent_proc->attached;
- clone_all_breakpoints (&child_proc->breakpoints,
- &child_proc->raw_breakpoints,
- parent_proc->breakpoints);
- tdesc = xmalloc (sizeof (struct target_desc));
+ if (event_lwp->bp_reinsert != 0
+ && can_software_single_step ()
+ && event == PTRACE_EVENT_VFORK)
+ {
+ /* If we leave single-step breakpoints there, child will
+ hit it, so uninsert single-step breakpoints from parent
+ (and child). Once vfork child is done, reinsert
+ them back to parent. */
+ uninsert_single_step_breakpoints (event_thr);
+ }
+
+ clone_all_breakpoints (child_thr, event_thr);
+
+ tdesc = XNEW (struct target_desc);
copy_target_description (tdesc, parent_proc->tdesc);
child_proc->tdesc = tdesc;
event_lwp->status_pending_p = 1;
event_lwp->status_pending = wstat;
+ /* If the parent thread is doing step-over with single-step
+ breakpoints, the list of single-step breakpoints are cloned
+ from the parent's. Remove them from the child process.
+ In case of vfork, we'll reinsert them back once vforked
+ child is done. */
+ if (event_lwp->bp_reinsert != 0
+ && can_software_single_step ())
+ {
+ /* The child process is forked and stopped, so it is safe
+ to access its memory without stopping all other threads
+ from other processes. */
+ delete_single_step_breakpoints (child_thr);
+
+ gdb_assert (has_single_step_breakpoints (event_thr));
+ gdb_assert (!has_single_step_breakpoints (child_thr));
+ }
+
/* Report the event. */
return 0;
}
before calling linux_resume_one_lwp. */
new_lwp->stopped = 1;
- /* If we're suspending all threads, leave this one suspended
- too. */
- if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ /* If we're suspending all threads, leave this one suspended
+ too. If the fork/clone parent is stepping over a breakpoint,
+ all other threads have been suspended already. Leave the
+ child suspended too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS
+ || event_lwp->bp_reinsert != 0)
new_lwp->suspended = 1;
/* Normally we will get the pending SIGSTOP. But in some cases
new_lwp->status_pending_p = 1;
new_lwp->status_pending = status;
}
+ else if (report_thread_events)
+ {
+ new_lwp->waitstatus.kind = TARGET_WAITKIND_THREAD_CREATED;
+ new_lwp->status_pending_p = 1;
+ new_lwp->status_pending = status;
+ }
/* Don't report the event. */
return 1;
{
event_lwp->waitstatus.kind = TARGET_WAITKIND_VFORK_DONE;
+ if (event_lwp->bp_reinsert != 0 && can_software_single_step ())
+ {
+ reinsert_single_step_breakpoints (event_thr);
+
+ gdb_assert (has_single_step_breakpoints (event_thr));
+ }
+
+ /* Report the event. */
+ return 0;
+ }
+ else if (event == PTRACE_EVENT_EXEC && report_exec_events)
+ {
+ struct process_info *proc;
+ VEC (int) *syscalls_to_catch;
+ ptid_t event_ptid;
+ pid_t event_pid;
+
+ if (debug_threads)
+ {
+ debug_printf ("HEW: Got exec event from LWP %ld\n",
+ lwpid_of (event_thr));
+ }
+
+ /* Get the event ptid. */
+ event_ptid = ptid_of (event_thr);
+ event_pid = ptid_get_pid (event_ptid);
+
+ /* Save the syscall list from the execing process. */
+ proc = get_thread_process (event_thr);
+ syscalls_to_catch = proc->syscalls_to_catch;
+ proc->syscalls_to_catch = NULL;
+
+ /* Delete the execing process and all its threads. */
+ linux_mourn (proc);
+ current_thread = NULL;
+
+ /* Create a new process/lwp/thread. */
+ proc = linux_add_process (event_pid, 0);
+ event_lwp = add_lwp (event_ptid);
+ event_thr = get_lwp_thread (event_lwp);
+ gdb_assert (current_thread == event_thr);
+ linux_arch_setup_thread (event_thr);
+
+ /* Set the event status. */
+ event_lwp->waitstatus.kind = TARGET_WAITKIND_EXECD;
+ event_lwp->waitstatus.value.execd_pathname
+ = xstrdup (linux_proc_pid_to_exec_file (lwpid_of (event_thr)));
+
+ /* Mark the exec status as pending. */
+ event_lwp->stopped = 1;
+ event_lwp->status_pending_p = 1;
+ event_lwp->status_pending = wstat;
+ event_thr->last_resume_kind = resume_continue;
+ event_thr->last_status.kind = TARGET_WAITKIND_IGNORE;
+
+ /* Update syscall state in the new lwp, effectively mid-syscall too. */
+ event_lwp->syscall_state = TARGET_WAITKIND_SYSCALL_ENTRY;
+
+ /* Restore the list to catch. Don't rely on the client, which is free
+ to avoid sending a new list when the architecture doesn't change.
+ Also, for ANY_SYSCALL, the architecture doesn't really matter. */
+ proc->syscalls_to_catch = syscalls_to_catch;
+
/* Report the event. */
+ *orig_event_lwp = event_lwp;
return 0;
}
return pc;
}
-/* This function should only be called if LWP got a SIGTRAP.
- The SIGTRAP could mean several things.
+/* This function should only be called if LWP got a SYSCALL_SIGTRAP.
+ Fill *SYSNO with the syscall nr trapped. */
- On i386, where decr_pc_after_break is non-zero:
+static void
+get_syscall_trapinfo (struct lwp_info *lwp, int *sysno)
+{
+ struct thread_info *saved_thread;
+ struct regcache *regcache;
- If we were single-stepping this process using PTRACE_SINGLESTEP, we
- will get only the one SIGTRAP. The value of $eip will be the next
- instruction. If the instruction we stepped over was a breakpoint,
- we need to decrement the PC.
+ if (the_low_target.get_syscall_trapinfo == NULL)
+ {
+ /* If we cannot get the syscall trapinfo, report an unknown
+ system call number. */
+ *sysno = UNKNOWN_SYSCALL;
+ return;
+ }
- If we continue the process using PTRACE_CONT, we will get a
- SIGTRAP when we hit a breakpoint. The value of $eip will be
- the instruction after the breakpoint (i.e. needs to be
- decremented). If we report the SIGTRAP to GDB, we must also
- report the undecremented PC. If the breakpoint is removed, we
- must resume at the decremented PC.
+ saved_thread = current_thread;
+ current_thread = get_lwp_thread (lwp);
- On a non-decr_pc_after_break machine with hardware or kernel
- single-step:
+ regcache = get_thread_regcache (current_thread, 1);
+ (*the_low_target.get_syscall_trapinfo) (regcache, sysno);
- If we either single-step a breakpoint instruction, or continue and
- hit a breakpoint instruction, our PC will point at the breakpoint
- instruction. */
+ if (debug_threads)
+ debug_printf ("get_syscall_trapinfo sysno %d\n", *sysno);
+
+ current_thread = saved_thread;
+}
+
+static int check_stopped_by_watchpoint (struct lwp_info *child);
+
+/* Called when the LWP stopped for a signal/trap. If it stopped for a
+ trap check what caused it (breakpoint, watchpoint, trace, etc.),
+ and save the result in the LWP's stop_reason field. If it stopped
+ for a breakpoint, decrement the PC if necessary on the lwp's
+ architecture. Returns true if we now have the LWP's stop PC. */
static int
-check_stopped_by_breakpoint (struct lwp_info *lwp)
+save_stop_reason (struct lwp_info *lwp)
{
CORE_ADDR pc;
CORE_ADDR sw_breakpoint_pc;
{
if (siginfo.si_signo == SIGTRAP)
{
- if (siginfo.si_code == GDB_ARCH_TRAP_BRKPT)
+ if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)
+ && GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code))
{
- if (debug_threads)
- {
- struct thread_info *thr = get_lwp_thread (lwp);
-
- debug_printf ("CSBB: %s stopped by software breakpoint\n",
- target_pid_to_str (ptid_of (thr)));
- }
-
- /* Back up the PC if necessary. */
- if (pc != sw_breakpoint_pc)
- {
- struct regcache *regcache
- = get_thread_regcache (current_thread, 1);
- (*the_low_target.set_pc) (regcache, sw_breakpoint_pc);
- }
-
- lwp->stop_pc = sw_breakpoint_pc;
+ /* The si_code is ambiguous on this arch -- check debug
+ registers. */
+ if (!check_stopped_by_watchpoint (lwp))
+ lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
+ }
+ else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code))
+ {
+ /* If we determine the LWP stopped for a SW breakpoint,
+ trust it. Particularly don't check watchpoint
+ registers, because at least on s390, we'd find
+ stopped-by-watchpoint as long as there's a watchpoint
+ set. */
lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
- current_thread = saved_thread;
- return 1;
}
- else if (siginfo.si_code == TRAP_HWBKPT)
+ else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code))
{
- if (debug_threads)
- {
- struct thread_info *thr = get_lwp_thread (lwp);
-
- debug_printf ("CSBB: %s stopped by hardware "
- "breakpoint/watchpoint\n",
- target_pid_to_str (ptid_of (thr)));
- }
-
- lwp->stop_pc = pc;
- lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
- current_thread = saved_thread;
- return 1;
+ /* This can indicate either a hardware breakpoint or
+ hardware watchpoint. Check debug registers. */
+ if (!check_stopped_by_watchpoint (lwp))
+ lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
}
else if (siginfo.si_code == TRAP_TRACE)
{
- if (debug_threads)
- {
- struct thread_info *thr = get_lwp_thread (lwp);
-
- debug_printf ("CSBB: %s stopped by trace\n",
- target_pid_to_str (ptid_of (thr)));
- }
-
- lwp->stop_reason = TARGET_STOPPED_BY_SINGLE_STEP;
+ /* We may have single stepped an instruction that
+ triggered a watchpoint. In that case, on some
+ architectures (such as x86), instead of TRAP_HWBKPT,
+ si_code indicates TRAP_TRACE, and we need to check
+ the debug registers separately. */
+ if (!check_stopped_by_watchpoint (lwp))
+ lwp->stop_reason = TARGET_STOPPED_BY_SINGLE_STEP;
}
}
}
case we need to report the breakpoint PC. */
if ((!lwp->stepping || lwp->stop_pc == sw_breakpoint_pc)
&& (*the_low_target.breakpoint_at) (sw_breakpoint_pc))
+ lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
+
+ if (hardware_breakpoint_inserted_here (pc))
+ lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
+
+ if (lwp->stop_reason == TARGET_STOPPED_BY_NO_REASON)
+ check_stopped_by_watchpoint (lwp);
+#endif
+
+ if (lwp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT)
{
if (debug_threads)
{
/* Back up the PC if necessary. */
if (pc != sw_breakpoint_pc)
- {
+ {
struct regcache *regcache
= get_thread_regcache (current_thread, 1);
(*the_low_target.set_pc) (regcache, sw_breakpoint_pc);
}
- lwp->stop_pc = sw_breakpoint_pc;
- lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
- current_thread = saved_thread;
- return 1;
+ /* Update this so we record the correct stop PC below. */
+ pc = sw_breakpoint_pc;
}
-
- if (hardware_breakpoint_inserted_here (pc))
+ else if (lwp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT)
{
if (debug_threads)
{
debug_printf ("CSBB: %s stopped by hardware breakpoint\n",
target_pid_to_str (ptid_of (thr)));
}
+ }
+ else if (lwp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT)
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
- lwp->stop_pc = pc;
- lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
- current_thread = saved_thread;
- return 1;
+ debug_printf ("CSBB: %s stopped by hardware watchpoint\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
}
-#endif
+ else if (lwp->stop_reason == TARGET_STOPPED_BY_SINGLE_STEP)
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+ debug_printf ("CSBB: %s stopped by trace\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+ }
+
+ lwp->stop_pc = pc;
current_thread = saved_thread;
- return 0;
+ return 1;
}
static struct lwp_info *
{
struct lwp_info *lwp;
- lwp = (struct lwp_info *) xcalloc (1, sizeof (*lwp));
+ lwp = XCNEW (struct lwp_info);
lwp->waitstatus.kind = TARGET_WAITKIND_IGNORE;
close_most_fds ();
ptrace (PTRACE_TRACEME, 0, (PTRACE_TYPE_ARG3) 0, (PTRACE_TYPE_ARG4) 0);
-#ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
- signal (__SIGRTMIN + 1, SIG_DFL);
-#endif
-
setpgid (0, 0);
/* If gdbserver is connected to gdb via stdio, redirect the inferior's
}
}
+ restore_original_signals_state ();
+
execv (program, allargs);
if (errno == ENOENT)
execvp (program, allargs);
return pid;
}
-/* Implement the arch_setup target_ops method. */
+/* Implement the post_create_inferior target_ops method. */
static void
-linux_arch_setup (void)
+linux_post_create_inferior (void)
{
- the_low_target.arch_setup ();
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+
+ linux_arch_setup ();
+
+ if (lwp->must_set_ptrace_flags)
+ {
+ struct process_info *proc = current_process ();
+ int options = linux_low_ptrace_options (proc->attached);
+
+ linux_enable_event_reporting (lwpid_of (current_thread), options);
+ lwp->must_set_ptrace_flags = 0;
+ }
}
/* Attach to an inferior process. Returns 0 on success, ERRNO on
return 0;
}
+static void async_file_mark (void);
+
/* Attach to PID. If PID is the tgid, attach to it and all
of its threads. */
static int
linux_attach (unsigned long pid)
{
+ struct process_info *proc;
+ struct thread_info *initial_thread;
ptid_t ptid = ptid_build (pid, pid, 0);
int err;
error ("Cannot attach to process %ld: %s",
pid, linux_ptrace_attach_fail_reason_string (ptid, err));
- linux_add_process (pid, 1);
+ proc = linux_add_process (pid, 1);
- if (!non_stop)
- {
- struct thread_info *thread;
-
- /* Don't ignore the initial SIGSTOP if we just attached to this
- process. It will be collected by wait shortly. */
- thread = find_thread_ptid (ptid_build (pid, pid, 0));
- thread->last_resume_kind = resume_stop;
- }
+ /* Don't ignore the initial SIGSTOP if we just attached to this
+ process. It will be collected by wait shortly. */
+ initial_thread = find_thread_ptid (ptid_build (pid, pid, 0));
+ initial_thread->last_resume_kind = resume_stop;
/* We must attach to every LWP. If /proc is mounted, use that to
find them now. On the one hand, the inferior may be using raw
that once thread_db is loaded, we'll still use it to list threads
and associate pthread info with each LWP. */
linux_proc_attach_tgid_threads (pid, attach_proc_task_lwp_callback);
+
+ /* GDB will shortly read the xml target description for this
+ process, to figure out the process' architecture. But the target
+ description is only filled in when the first process/thread in
+ the thread group reports its initial PTRACE_ATTACH SIGSTOP. Do
+ that now, otherwise, if GDB is fast enough, it could read the
+ target description _before_ that initial stop. */
+ if (non_stop)
+ {
+ struct lwp_info *lwp;
+ int wstat, lwpid;
+ ptid_t pid_ptid = pid_to_ptid (pid);
+
+ lwpid = linux_wait_for_event_filtered (pid_ptid, pid_ptid,
+ &wstat, __WALL);
+ gdb_assert (lwpid > 0);
+
+ lwp = find_lwp_pid (pid_to_ptid (lwpid));
+
+ if (!WIFSTOPPED (wstat) || WSTOPSIG (wstat) != SIGSTOP)
+ {
+ lwp->status_pending_p = 1;
+ lwp->status_pending = wstat;
+ }
+
+ initial_thread->last_resume_kind = resume_continue;
+
+ async_file_mark ();
+
+ gdb_assert (proc->tdesc != NULL);
+ }
+
return 0;
}
static int
second_thread_of_pid_p (struct inferior_list_entry *entry, void *args)
{
- struct counter *counter = args;
+ struct counter *counter = (struct counter *) args;
if (ptid_get_pid (entry->id) == counter->pid)
{
ptrace(CONT, pid, 0,0) and just resumes the tracee. A better
alternative is to kill with SIGKILL. We only need one SIGKILL
per process, not one for each thread. But since we still support
- linuxthreads, and we also support debugging programs using raw
- clone without CLONE_THREAD, we send one for each thread. For
- years, we used PTRACE_KILL only, so we're being a bit paranoid
- about some old kernels where PTRACE_KILL might work better
- (dubious if there are any such, but that's why it's paranoia), so
- we try SIGKILL first, PTRACE_KILL second, and so we're fine
- everywhere. */
+ support debugging programs using raw clone without CLONE_THREAD,
+ we send one for each thread. For years, we used PTRACE_KILL
+ only, so we're being a bit paranoid about some old kernels where
+ PTRACE_KILL might work better (dubious if there are any such, but
+ that's why it's paranoia), so we try SIGKILL first, PTRACE_KILL
+ second, and so we're fine everywhere. */
errno = 0;
kill_lwp (pid, SIGKILL);
}
}
-static int
-linux_detach_one_lwp (struct inferior_list_entry *entry, void *args)
+/* Detach from LWP. */
+
+static void
+linux_detach_one_lwp (struct lwp_info *lwp)
{
- struct thread_info *thread = (struct thread_info *) entry;
- struct lwp_info *lwp = get_thread_lwp (thread);
- int pid = * (int *) args;
+ struct thread_info *thread = get_lwp_thread (lwp);
int sig;
-
- if (ptid_get_pid (entry->id) != pid)
- return 0;
+ int lwpid;
/* If there is a pending SIGSTOP, get rid of it. */
if (lwp->stop_expected)
lwp->stop_expected = 0;
}
- /* Flush any pending changes to the process's registers. */
- regcache_invalidate_thread (thread);
-
/* Pass on any pending signal for this thread. */
sig = get_detach_signal (thread);
- /* Finally, let it resume. */
- if (the_low_target.prepare_to_resume != NULL)
- the_low_target.prepare_to_resume (lwp);
- if (ptrace (PTRACE_DETACH, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ /* Preparing to resume may try to write registers, and fail if the
+ lwp is zombie. If that happens, ignore the error. We'll handle
+ it below, when detach fails with ESRCH. */
+ TRY
+ {
+ /* Flush any pending changes to the process's registers. */
+ regcache_invalidate_thread (thread);
+
+ /* Finally, let it resume. */
+ if (the_low_target.prepare_to_resume != NULL)
+ the_low_target.prepare_to_resume (lwp);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ if (!check_ptrace_stopped_lwp_gone (lwp))
+ throw_exception (ex);
+ }
+ END_CATCH
+
+ lwpid = lwpid_of (thread);
+ if (ptrace (PTRACE_DETACH, lwpid, (PTRACE_TYPE_ARG3) 0,
(PTRACE_TYPE_ARG4) (long) sig) < 0)
- error (_("Can't detach %s: %s"),
- target_pid_to_str (ptid_of (thread)),
- strerror (errno));
+ {
+ int save_errno = errno;
+
+ /* We know the thread exists, so ESRCH must mean the lwp is
+ zombie. This can happen if one of the already-detached
+ threads exits the whole thread group. In that case we're
+ still attached, and must reap the lwp. */
+ if (save_errno == ESRCH)
+ {
+ int ret, status;
+
+ ret = my_waitpid (lwpid, &status, __WALL);
+ if (ret == -1)
+ {
+ warning (_("Couldn't reap LWP %d while detaching: %s"),
+ lwpid, strerror (errno));
+ }
+ else if (!WIFEXITED (status) && !WIFSIGNALED (status))
+ {
+ warning (_("Reaping LWP %d while detaching "
+ "returned unexpected status 0x%x"),
+ lwpid, status);
+ }
+ }
+ else
+ {
+ error (_("Can't detach %s: %s"),
+ target_pid_to_str (ptid_of (thread)),
+ strerror (save_errno));
+ }
+ }
+ else if (debug_threads)
+ {
+ debug_printf ("PTRACE_DETACH (%s, %s, 0) (OK)\n",
+ target_pid_to_str (ptid_of (thread)),
+ strsignal (sig));
+ }
delete_lwp (lwp);
+}
+
+/* Callback for find_inferior. Detaches from non-leader threads of a
+ given process. */
+
+static int
+linux_detach_lwp_callback (struct inferior_list_entry *entry, void *args)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int pid = *(int *) args;
+ int lwpid = lwpid_of (thread);
+
+ /* Skip other processes. */
+ if (ptid_get_pid (entry->id) != pid)
+ return 0;
+
+ /* We don't actually detach from the thread group leader just yet.
+ If the thread group exits, we must reap the zombie clone lwps
+ before we're able to reap the leader. */
+ if (ptid_get_pid (entry->id) == lwpid)
+ return 0;
+
+ linux_detach_one_lwp (lwp);
return 0;
}
linux_detach (int pid)
{
struct process_info *process;
+ struct lwp_info *main_lwp;
process = find_process_pid (pid);
if (process == NULL)
/* Stabilize threads (move out of jump pads). */
stabilize_threads ();
- find_inferior (&all_threads, linux_detach_one_lwp, &pid);
+ /* Detach from the clone lwps first. If the thread group exits just
+ while we're detaching, we must reap the clone lwps before we're
+ able to reap the leader. */
+ find_inferior (&all_threads, linux_detach_lwp_callback, &pid);
+
+ main_lwp = find_lwp_pid (pid_to_ptid (pid));
+ linux_detach_one_lwp (main_lwp);
the_target->mourn (process);
{
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lwp = get_thread_lwp (thread);
- struct process_info *process = proc;
+ struct process_info *process = (struct process_info *) proc;
if (pid_of (thread) == pid_of (process))
delete_lwp (lwp);
if (!lp->status_pending_p)
return 0;
- /* If we got a `vCont;t', but we haven't reported a stop yet, do
- report any status pending the LWP may have. */
- if (thread->last_resume_kind == resume_stop
- && thread->last_status.kind != TARGET_WAITKIND_IGNORE)
- return 0;
-
if (thread->last_resume_kind != resume_stop
&& (lp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
|| lp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT))
return 1;
}
+/* Returns true if LWP is resumed from the client's perspective. */
+
+static int
+lwp_resumed (struct lwp_info *lwp)
+{
+ struct thread_info *thread = get_lwp_thread (lwp);
+
+ if (thread->last_resume_kind != resume_stop)
+ return 1;
+
+ /* Did gdb send us a `vCont;t', but we haven't reported the
+ corresponding stop to gdb yet? If so, the thread is still
+ resumed/running from gdb's perspective. */
+ if (thread->last_resume_kind == resume_stop
+ && thread->last_status.kind == TARGET_WAITKIND_IGNORE)
+ return 1;
+
+ return 0;
+}
+
/* Return 1 if this lwp has an interesting status pending. */
static int
status_pending_p_callback (struct inferior_list_entry *entry, void *arg)
if (!ptid_match (ptid_of (thread), ptid))
return 0;
+ if (!lwp_resumed (lp))
+ return 0;
+
if (lp->status_pending_p
&& !thread_still_has_status_pending_p (thread))
{
leader_pid, leader_lp!= NULL, num_lwps (leader_pid),
linux_proc_pid_is_zombie (leader_pid));
- if (leader_lp != NULL
+ if (leader_lp != NULL && !leader_lp->stopped
/* Check if there are other threads in the group, as we may
have raced with the inferior simply exiting. */
&& !last_thread_of_process_p (leader_pid)
}
}
- p_sig = xmalloc (sizeof (*p_sig));
+ p_sig = XCNEW (struct pending_signals);
p_sig->prev = lwp->pending_signals_to_report;
p_sig->signal = WSTOPSIG (*wstat);
- memset (&p_sig->info, 0, sizeof (siginfo_t));
+
ptrace (PTRACE_GETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
&p_sig->info);
if (report_vfork_events)
options |= (PTRACE_O_TRACEVFORK | PTRACE_O_TRACEVFORKDONE);
+ if (report_exec_events)
+ options |= PTRACE_O_TRACEEXEC;
+
+ options |= PTRACE_O_TRACESYSGOOD;
+
return options;
}
child = find_lwp_pid (pid_to_ptid (lwpid));
+ /* Check for stop events reported by a process we didn't already
+ know about - anything not already in our LWP list.
+
+ If we're expecting to receive stopped processes after
+ fork, vfork, and clone events, then we'll just add the
+ new one to our list and go back to waiting for the event
+ to be reported - the stopped process might be returned
+ from waitpid before or after the event is.
+
+ But note the case of a non-leader thread exec'ing after the
+ leader having exited, and gone from our lists (because
+ check_zombie_leaders deleted it). The non-leader thread
+ changes its tid to the tgid. */
+
+ if (WIFSTOPPED (wstat) && child == NULL && WSTOPSIG (wstat) == SIGTRAP
+ && linux_ptrace_get_extended_event (wstat) == PTRACE_EVENT_EXEC)
+ {
+ ptid_t child_ptid;
+
+ /* A multi-thread exec after we had seen the leader exiting. */
+ if (debug_threads)
+ {
+ debug_printf ("LLW: Re-adding thread group leader LWP %d"
+ "after exec.\n", lwpid);
+ }
+
+ child_ptid = ptid_build (lwpid, lwpid, 0);
+ child = add_lwp (child_ptid);
+ child->stopped = 1;
+ current_thread = child->thread;
+ }
+
/* If we didn't find a process, one of two things presumably happened:
- A process we started and then detached from has exited. Ignore it.
- A process we are controlling has forked and the new child's stop
{
if (debug_threads)
debug_printf ("LLFE: %d exited.\n", lwpid);
- if (num_lwps (pid_of (thread)) > 1)
- {
- /* If there is at least one more LWP, then the exit signal was
- not the end of the debugged application and should be
- ignored. */
- delete_lwp (child);
- return NULL;
+ if (finish_step_over (child))
+ {
+ /* Unsuspend all other LWPs, and set them back running again. */
+ unsuspend_all_lwps (child);
}
- else
+
+ /* If there is at least one more LWP, then the exit signal was
+ not the end of the debugged application and should be
+ ignored, unless GDB wants to hear about thread exits. */
+ if (report_thread_events
+ || last_thread_of_process_p (pid_of (thread)))
{
- /* This was the last lwp in the process. Since events are
- serialized to GDB core, and we can't report this one
- right now, but GDB core and the other target layers will
- want to be notified about the exit code/signal, leave the
- status pending for the next time we're able to report
- it. */
+ /* Since events are serialized to GDB core, and we can't
+ report this one right now. Leave the status pending for
+ the next time we're able to report it. */
mark_lwp_dead (child, wstat);
return child;
}
+ else
+ {
+ delete_lwp (child);
+ return NULL;
+ }
}
gdb_assert (WIFSTOPPED (wstat));
{
if (proc->attached)
{
- struct thread_info *saved_thread;
-
/* This needs to happen after we have attached to the
inferior and it is stopped for the first time, but
before we access any inferior registers. */
- saved_thread = current_thread;
- current_thread = thread;
-
- the_low_target.arch_setup ();
-
- current_thread = saved_thread;
+ linux_arch_setup_thread (thread);
}
else
{
child->must_set_ptrace_flags = 0;
}
- /* Be careful to not overwrite stop_pc until
- check_stopped_by_breakpoint is called. */
+ /* Always update syscall_state, even if it will be filtered later. */
+ if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SYSCALL_SIGTRAP)
+ {
+ child->syscall_state
+ = (child->syscall_state == TARGET_WAITKIND_SYSCALL_ENTRY
+ ? TARGET_WAITKIND_SYSCALL_RETURN
+ : TARGET_WAITKIND_SYSCALL_ENTRY);
+ }
+ else
+ {
+ /* Almost all other ptrace-stops are known to be outside of system
+ calls, with further exceptions in handle_extended_wait. */
+ child->syscall_state = TARGET_WAITKIND_IGNORE;
+ }
+
+ /* Be careful to not overwrite stop_pc until save_stop_reason is
+ called. */
if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP
&& linux_is_extended_waitstatus (wstat))
{
child->stop_pc = get_pc (child);
- if (handle_extended_wait (child, wstat))
+ if (handle_extended_wait (&child, wstat))
{
/* The event has been handled, so just return without
reporting it. */
}
}
- /* Check first whether this was a SW/HW breakpoint before checking
- watchpoints, because at least s390 can't tell the data address of
- hardware watchpoint hits, and returns stopped-by-watchpoint as
- long as there's a watchpoint set. */
- if (WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat))
+ if (linux_wstatus_maybe_breakpoint (wstat))
{
- if (check_stopped_by_breakpoint (child))
+ if (save_stop_reason (child))
have_stop_pc = 1;
}
- /* Note that TRAP_HWBKPT can indicate either a hardware breakpoint
- or hardware watchpoint. Check which is which if we got
- TARGET_STOPPED_BY_HW_BREAKPOINT. Likewise, we may have single
- stepped an instruction that triggered a watchpoint. In that
- case, on some architectures (such as x86), instead of
- TRAP_HWBKPT, si_code indicates TRAP_TRACE, and we need to check
- the debug registers separately. */
- if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP
- && child->stop_reason != TARGET_STOPPED_BY_SW_BREAKPOINT)
- check_stopped_by_watchpoint (child);
-
if (!have_stop_pc)
child->stop_pc = get_pc (child);
return child;
}
+/* Return true if THREAD is doing hardware single step. */
+
+static int
+maybe_hw_step (struct thread_info *thread)
+{
+ if (can_hardware_single_step ())
+ return 1;
+ else
+ {
+ /* GDBserver must insert single-step breakpoint for software
+ single step. */
+ gdb_assert (has_single_step_breakpoints (thread));
+ return 0;
+ }
+}
+
/* Resume LWPs that are currently stopped without any pending status
to report, but are resumed from the core's perspective. */
if (lp->stopped
&& !lp->suspended
&& !lp->status_pending_p
- && thread->last_resume_kind != resume_stop
&& thread->last_status.kind == TARGET_WAITKIND_IGNORE)
{
- int step = thread->last_resume_kind == resume_step;
+ int step = 0;
+
+ if (thread->last_resume_kind == resume_step)
+ step = maybe_hw_step (thread);
if (debug_threads)
debug_printf ("RSRL: resuming stopped-resumed LWP %s at %s: step=%d\n",
- When a non-leader thread execs, that thread just vanishes
without reporting an exit (so we'd hang if we waited for it
explicitly in that case). The exec event is reported to
- the TGID pid (although we don't currently enable exec
- events). */
+ the TGID pid. */
errno = 0;
ret = my_waitpid (-1, wstatp, options | WNOHANG);
current_thread = event_thread;
- /* Check for thread exit. */
- if (! WIFSTOPPED (*wstatp))
- {
- gdb_assert (last_thread_of_process_p (pid_of (event_thread)));
-
- if (debug_threads)
- debug_printf ("LWP %d is the last lwp of process. "
- "Process %ld exiting.\n",
- pid_of (event_thread), lwpid_of (event_thread));
- return lwpid_of (event_thread);
- }
-
return lwpid_of (event_thread);
}
{
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lp = get_thread_lwp (thread);
- int *count = data;
+ int *count = (int *) data;
gdb_assert (count != NULL);
{
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lp = get_thread_lwp (thread);
- int *selector = data;
+ int *selector = (int *) data;
gdb_assert (selector != NULL);
}
}
- find_inferior (&all_threads, unsuspend_one_lwp, NULL);
+ unsuspend_all_lwps (NULL);
stabilizing_threads = 0;
}
}
-static void async_file_mark (void);
-
/* Convenience function that is called when the kernel reports an
event that is not passed out to GDB. */
return null_ptid;
}
+/* Convenience function that is called when the kernel reports an exit
+ event. This decides whether to report the event to GDB as a
+ process exit event, a thread exit event, or to suppress the
+ event. */
+
+static ptid_t
+filter_exit_event (struct lwp_info *event_child,
+ struct target_waitstatus *ourstatus)
+{
+ struct thread_info *thread = get_lwp_thread (event_child);
+ ptid_t ptid = ptid_of (thread);
+
+ if (!last_thread_of_process_p (pid_of (thread)))
+ {
+ if (report_thread_events)
+ ourstatus->kind = TARGET_WAITKIND_THREAD_EXITED;
+ else
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+
+ delete_lwp (event_child);
+ }
+ return ptid;
+}
+
+/* Returns 1 if GDB is interested in any event_child syscalls. */
+
+static int
+gdb_catching_syscalls_p (struct lwp_info *event_child)
+{
+ struct thread_info *thread = get_lwp_thread (event_child);
+ struct process_info *proc = get_thread_process (thread);
+
+ return !VEC_empty (int, proc->syscalls_to_catch);
+}
+
+/* Returns 1 if GDB is interested in the event_child syscall.
+ Only to be called when stopped reason is SYSCALL_SIGTRAP. */
+
+static int
+gdb_catch_this_syscall_p (struct lwp_info *event_child)
+{
+ int i, iter;
+ int sysno;
+ struct thread_info *thread = get_lwp_thread (event_child);
+ struct process_info *proc = get_thread_process (thread);
+
+ if (VEC_empty (int, proc->syscalls_to_catch))
+ return 0;
+
+ if (VEC_index (int, proc->syscalls_to_catch, 0) == ANY_SYSCALL)
+ return 1;
+
+ get_syscall_trapinfo (event_child, &sysno);
+ for (i = 0;
+ VEC_iterate (int, proc->syscalls_to_catch, i, iter);
+ i++)
+ if (iter == sysno)
+ return 1;
+
+ return 0;
+}
+
/* Wait for process, returns status. */
static ptid_t
int report_to_gdb;
int trace_event;
int in_step_range;
+ int any_resumed;
if (debug_threads)
{
in_step_range = 0;
ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ /* Find a resumed LWP, if any. */
+ if (find_inferior (&all_threads,
+ status_pending_p_callback,
+ &minus_one_ptid) != NULL)
+ any_resumed = 1;
+ else if ((find_inferior (&all_threads,
+ not_stopped_callback,
+ &minus_one_ptid) != NULL))
+ any_resumed = 1;
+ else
+ any_resumed = 0;
+
if (ptid_equal (step_over_bkpt, null_ptid))
pid = linux_wait_for_event (ptid, &w, options);
else
pid = linux_wait_for_event (step_over_bkpt, &w, options & ~WNOHANG);
}
- if (pid == 0)
+ if (pid == 0 || (pid == -1 && !any_resumed))
{
gdb_assert (target_options & TARGET_WNOHANG);
}
}
+ if (ourstatus->kind == TARGET_WAITKIND_EXITED)
+ return filter_exit_event (event_child, ourstatus);
+
return ptid_of (current_thread);
}
- /* If step-over executes a breakpoint instruction, it means a
- gdb/gdbserver breakpoint had been planted on top of a permanent
- breakpoint. The PC has been adjusted by
- check_stopped_by_breakpoint to point at the breakpoint address.
- Advance the PC manually past the breakpoint, otherwise the
- program would keep trapping the permanent breakpoint forever. */
+ /* If step-over executes a breakpoint instruction, in the case of a
+ hardware single step it means a gdb/gdbserver breakpoint had been
+ planted on top of a permanent breakpoint, in the case of a software
+ single step it may just mean that gdbserver hit the reinsert breakpoint.
+ The PC has been adjusted by save_stop_reason to point at
+ the breakpoint address.
+ So in the case of the hardware single step advance the PC manually
+ past the breakpoint and in the case of software single step advance only
+ if it's not the single_step_breakpoint we are hitting.
+ This avoids that a program would keep trapping a permanent breakpoint
+ forever. */
if (!ptid_equal (step_over_bkpt, null_ptid)
- && event_child->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT)
+ && event_child->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
+ && (event_child->stepping
+ || !single_step_breakpoint_inserted_here (event_child->stop_pc)))
{
- unsigned int increment_pc = the_low_target.breakpoint_len;
+ int increment_pc = 0;
+ int breakpoint_kind = 0;
+ CORE_ADDR stop_pc = event_child->stop_pc;
+
+ breakpoint_kind =
+ the_target->breakpoint_kind_from_current_state (&stop_pc);
+ the_target->sw_breakpoint_from_kind (breakpoint_kind, &increment_pc);
if (debug_threads)
{
/* We have a SIGTRAP, possibly a step-over dance has just
finished. If so, tweak the state machine accordingly,
- reinsert breakpoints and delete any reinsert (software
- single-step) breakpoints. */
+ reinsert breakpoints and delete any single-step
+ breakpoints. */
step_over_finished = finish_step_over (event_child);
/* Now invoke the callbacks of any internal breakpoints there. */
if (bp_explains_trap)
{
- /* If we stepped or ran into an internal breakpoint, we've
- already handled it. So next time we resume (from this
- PC), we should step over it. */
if (debug_threads)
debug_printf ("Hit a gdbserver breakpoint.\n");
-
- if (breakpoint_here (event_child->stop_pc))
- event_child->need_step_over = 1;
}
}
else
linux_resume_one_lwp (event_child, 0, 0, NULL);
+ if (debug_threads)
+ debug_exit ();
return ignore_event (ourstatus);
}
}
/* Check whether GDB would be interested in this event. */
+ /* Check if GDB is interested in this syscall. */
+ if (WIFSTOPPED (w)
+ && WSTOPSIG (w) == SYSCALL_SIGTRAP
+ && !gdb_catch_this_syscall_p (event_child))
+ {
+ if (debug_threads)
+ {
+ debug_printf ("Ignored syscall for LWP %ld.\n",
+ lwpid_of (current_thread));
+ }
+
+ linux_resume_one_lwp (event_child, event_child->stepping,
+ 0, NULL);
+
+ if (debug_threads)
+ debug_exit ();
+ return ignore_event (ourstatus);
+ }
+
/* If GDB is not interested in this signal, don't stop other
threads, and don't report it to GDB. Just resume the inferior
right away. We do this for threading-related signals as well as
stepping - they may require special handling to skip the signal
handler. Also never ignore signals that could be caused by a
breakpoint. */
- /* FIXME drow/2002-06-09: Get signal numbers from the inferior's
- thread library? */
if (WIFSTOPPED (w)
&& current_thread->last_resume_kind != resume_step
&& (
linux_resume_one_lwp (event_child, event_child->stepping,
WSTOPSIG (w), info_p);
}
+
+ if (debug_threads)
+ debug_exit ();
+
return ignore_event (ourstatus);
}
unsuspend_all_lwps (event_child);
proceed_all_lwps ();
+
+ if (debug_threads)
+ debug_exit ();
+
return ignore_event (ourstatus);
}
/* Alright, we're going to report a stop. */
- if (!stabilizing_threads)
+ /* Remove single-step breakpoints. */
+ if (can_software_single_step ())
{
- /* In all-stop, stop all threads. */
- if (!non_stop)
- stop_all_lwps (0, NULL);
+ /* Remove single-step breakpoints or not. It it is true, stop all
+ lwps, so that other threads won't hit the breakpoint in the
+ staled memory. */
+ int remove_single_step_breakpoints_p = 0;
- /* If we're not waiting for a specific LWP, choose an event LWP
- from among those that have had events. Giving equal priority
- to all LWPs that have had events helps prevent
- starvation. */
- if (ptid_equal (ptid, minus_one_ptid))
+ if (non_stop)
{
- event_child->status_pending_p = 1;
- event_child->status_pending = w;
+ remove_single_step_breakpoints_p
+ = has_single_step_breakpoints (current_thread);
+ }
+ else
+ {
+ /* In all-stop, a stop reply cancels all previous resume
+ requests. Delete all single-step breakpoints. */
+ struct inferior_list_entry *inf, *tmp;
- select_event_lwp (&event_child);
+ ALL_INFERIORS (&all_threads, inf, tmp)
+ {
+ struct thread_info *thread = (struct thread_info *) inf;
- /* current_thread and event_child must stay in sync. */
- current_thread = get_lwp_thread (event_child);
+ if (has_single_step_breakpoints (thread))
+ {
+ remove_single_step_breakpoints_p = 1;
+ break;
+ }
+ }
+ }
- event_child->status_pending_p = 0;
- w = event_child->status_pending;
+ if (remove_single_step_breakpoints_p)
+ {
+ /* If we remove single-step breakpoints from memory, stop all lwps,
+ so that other threads won't hit the breakpoint in the staled
+ memory. */
+ stop_all_lwps (0, event_child);
+
+ if (non_stop)
+ {
+ gdb_assert (has_single_step_breakpoints (current_thread));
+ delete_single_step_breakpoints (current_thread);
+ }
+ else
+ {
+ struct inferior_list_entry *inf, *tmp;
+
+ ALL_INFERIORS (&all_threads, inf, tmp)
+ {
+ struct thread_info *thread = (struct thread_info *) inf;
+
+ if (has_single_step_breakpoints (thread))
+ delete_single_step_breakpoints (thread);
+ }
+ }
+
+ unstop_all_lwps (0, event_child);
}
+ }
+
+ if (!stabilizing_threads)
+ {
+ /* In all-stop, stop all threads. */
+ if (!non_stop)
+ stop_all_lwps (0, NULL);
if (step_over_finished)
{
}
}
+ /* If we're not waiting for a specific LWP, choose an event LWP
+ from among those that have had events. Giving equal priority
+ to all LWPs that have had events helps prevent
+ starvation. */
+ if (ptid_equal (ptid, minus_one_ptid))
+ {
+ event_child->status_pending_p = 1;
+ event_child->status_pending = w;
+
+ select_event_lwp (&event_child);
+
+ /* current_thread and event_child must stay in sync. */
+ current_thread = get_lwp_thread (event_child);
+
+ event_child->status_pending_p = 0;
+ w = event_child->status_pending;
+ }
+
+
/* Stabilize threads (move out of jump pads). */
if (!non_stop)
stabilize_threads ();
}
}
- if (current_thread->last_resume_kind == resume_stop
- && WSTOPSIG (w) == SIGSTOP)
+ if (WSTOPSIG (w) == SYSCALL_SIGTRAP)
+ {
+ get_syscall_trapinfo (event_child,
+ &ourstatus->value.syscall_number);
+ ourstatus->kind = event_child->syscall_state;
+ }
+ else if (current_thread->last_resume_kind == resume_stop
+ && WSTOPSIG (w) == SIGSTOP)
{
/* A thread that has been requested to stop by GDB with vCont;t,
and it stopped cleanly, so report as SIG0. The use of
debug_exit ();
}
+ if (ourstatus->kind == TARGET_WAITKIND_EXITED)
+ return filter_exit_event (event_child, ourstatus);
+
return ptid_of (current_thread);
}
static int
kill_lwp (unsigned long lwpid, int signo)
{
- /* Use tkill, if possible, in case we are using nptl threads. If tkill
- fails, then we are not using nptl threads and we should be using kill. */
-
-#ifdef __NR_tkill
- {
- static int tkill_failed;
-
- if (!tkill_failed)
- {
- int ret;
-
- errno = 0;
- ret = syscall (__NR_tkill, lwpid, signo);
- if (errno != ENOSYS)
- return ret;
- tkill_failed = 1;
- }
- }
-#endif
+ int ret;
- return kill (lwpid, signo);
+ errno = 0;
+ ret = syscall (__NR_tkill, lwpid, signo);
+ if (errno == ENOSYS)
+ {
+ /* If tkill fails, then we are not using nptl threads, a
+ configuration we no longer support. */
+ perror_with_name (("tkill"));
+ }
+ return ret;
}
void
if (debug_threads)
debug_printf ("Previously current thread died.\n");
- if (non_stop)
- {
- /* We can't change the current inferior behind GDB's back,
- otherwise, a subsequent command may apply to the wrong
- process. */
- current_thread = NULL;
- }
- else
- {
- /* Set a valid thread as current. */
- set_desired_thread (0);
- }
+ /* We can't change the current inferior behind GDB's back,
+ otherwise, a subsequent command may apply to the wrong
+ process. */
+ current_thread = NULL;
}
}
static void
enqueue_pending_signal (struct lwp_info *lwp, int signal, siginfo_t *info)
{
- struct pending_signals *p_sig;
+ struct pending_signals *p_sig = XNEW (struct pending_signals);
- p_sig = xmalloc (sizeof (*p_sig));
p_sig->prev = lwp->pending_signals;
p_sig->signal = signal;
if (info == NULL)
lwp->pending_signals = p_sig;
}
+/* Install breakpoints for software single stepping. */
+
+static void
+install_software_single_step_breakpoints (struct lwp_info *lwp)
+{
+ int i;
+ CORE_ADDR pc;
+ struct thread_info *thread = get_lwp_thread (lwp);
+ struct regcache *regcache = get_thread_regcache (thread, 1);
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup_restore_current_thread ();
+
+ make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+
+ current_thread = thread;
+ next_pcs = (*the_low_target.get_next_pcs) (regcache);
+
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); ++i)
+ set_single_step_breakpoint (pc, current_ptid);
+
+ do_cleanups (old_chain);
+}
+
+/* Single step via hardware or software single step.
+ Return 1 if hardware single stepping, 0 if software single stepping
+ or can't single step. */
+
+static int
+single_step (struct lwp_info* lwp)
+{
+ int step = 0;
+
+ if (can_hardware_single_step ())
+ {
+ step = 1;
+ }
+ else if (can_software_single_step ())
+ {
+ install_software_single_step_breakpoints (lwp);
+ step = 0;
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("stepping is not implemented on this target");
+ }
+
+ return step;
+}
+
+/* The signal can be delivered to the inferior if we are not trying to
+ finish a fast tracepoint collect. Since signal can be delivered in
+ the step-over, the program may go to signal handler and trap again
+ after return from the signal handler. We can live with the spurious
+ double traps. */
+
+static int
+lwp_signal_can_be_delivered (struct lwp_info *lwp)
+{
+ return !lwp->collecting_fast_tracepoint;
+}
+
/* Resume execution of LWP. If STEP is nonzero, single-step it. If
SIGNAL is nonzero, give it that signal. */
struct thread_info *thread = get_lwp_thread (lwp);
struct thread_info *saved_thread;
int fast_tp_collecting;
+ int ptrace_request;
struct process_info *proc = get_thread_process (thread);
/* Note that target description may not be initialised
if (lwp->stopped == 0)
return;
+ gdb_assert (lwp->waitstatus.kind == TARGET_WAITKIND_IGNORE);
+
fast_tp_collecting = lwp->collecting_fast_tracepoint;
gdb_assert (!stabilizing_threads || fast_tp_collecting);
}
/* If we have pending signals or status, and a new signal, enqueue the
- signal. Also enqueue the signal if we are waiting to reinsert a
- breakpoint; it will be picked up again below. */
+ signal. Also enqueue the signal if it can't be delivered to the
+ inferior right now. */
if (signal != 0
&& (lwp->status_pending_p
|| lwp->pending_signals != NULL
- || lwp->bp_reinsert != 0
- || fast_tp_collecting))
- {
- struct pending_signals *p_sig;
- p_sig = xmalloc (sizeof (*p_sig));
- p_sig->prev = lwp->pending_signals;
- p_sig->signal = signal;
- if (info == NULL)
- memset (&p_sig->info, 0, sizeof (siginfo_t));
- else
- memcpy (&p_sig->info, info, sizeof (siginfo_t));
- lwp->pending_signals = p_sig;
+ || !lwp_signal_can_be_delivered (lwp)))
+ {
+ enqueue_pending_signal (lwp, signal, info);
+
+ /* Postpone any pending signal. It was enqueued above. */
+ signal = 0;
}
if (lwp->status_pending_p)
{
if (debug_threads)
- debug_printf ("Not resuming lwp %ld (%s, signal %d, stop %s);"
+ debug_printf ("Not resuming lwp %ld (%s, stop %s);"
" has pending status\n",
- lwpid_of (thread), step ? "step" : "continue", signal,
+ lwpid_of (thread), step ? "step" : "continue",
lwp->stop_expected ? "expected" : "not expected");
return;
}
saved_thread = current_thread;
current_thread = thread;
- if (debug_threads)
- debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
- lwpid_of (thread), step ? "step" : "continue", signal,
- lwp->stop_expected ? "expected" : "not expected");
-
/* This bit needs some thinking about. If we get a signal that
we must report while a single-step reinsert is still pending,
we often end up resuming the thread. It might be better to
fprintf (stderr, "BAD - reinserting and suspended(%d).\n",
lwp->suspended);
}
-
- step = 1;
}
- /* Postpone any pending signal. It was enqueued above. */
- signal = 0;
+ step = maybe_hw_step (thread);
}
if (fast_tp_collecting == 1)
debug_printf ("lwp %ld wants to get out of fast tracepoint jump pad"
" (exit-jump-pad-bkpt)\n",
lwpid_of (thread));
-
- /* Postpone any pending signal. It was enqueued above. */
- signal = 0;
}
else if (fast_tp_collecting == 2)
{
"moving out of jump pad single-stepping"
" not implemented on this target");
}
-
- /* Postpone any pending signal. It was enqueued above. */
- signal = 0;
}
/* If we have while-stepping actions in this thread set it stepping.
address, continue, and carry on catching this while-stepping
action only when that breakpoint is hit. A future
enhancement. */
- if (thread->while_stepping != NULL
- && can_hardware_single_step ())
+ if (thread->while_stepping != NULL)
{
if (debug_threads)
debug_printf ("lwp %ld has a while-stepping action -> forcing step.\n",
lwpid_of (thread));
- step = 1;
+
+ step = single_step (lwp);
}
if (proc->tdesc != NULL && the_low_target.get_pc != NULL)
}
}
- /* If we have pending signals, consume one unless we are trying to
- reinsert a breakpoint or we're trying to finish a fast tracepoint
- collect. */
- if (lwp->pending_signals != NULL
- && lwp->bp_reinsert == 0
- && fast_tp_collecting == 0)
+ /* If we have pending signals, consume one if it can be delivered to
+ the inferior. */
+ if (lwp->pending_signals != NULL && lwp_signal_can_be_delivered (lwp))
{
struct pending_signals **p_sig;
*p_sig = NULL;
}
+ if (debug_threads)
+ debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
+ lwpid_of (thread), step ? "step" : "continue", signal,
+ lwp->stop_expected ? "expected" : "not expected");
+
if (the_low_target.prepare_to_resume != NULL)
the_low_target.prepare_to_resume (lwp);
regcache_invalidate_thread (thread);
errno = 0;
lwp->stepping = step;
- ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread),
+ if (step)
+ ptrace_request = PTRACE_SINGLESTEP;
+ else if (gdb_catching_syscalls_p (lwp))
+ ptrace_request = PTRACE_SYSCALL;
+ else
+ ptrace_request = PTRACE_CONT;
+ ptrace (ptrace_request,
+ lwpid_of (thread),
(PTRACE_TYPE_ARG3) 0,
/* Coerce to a uintptr_t first to avoid potential gcc warning
of coercing an 8 byte integer to a 4 byte pointer. */
int ndx;
struct thread_resume_array *r;
- r = arg;
+ r = (struct thread_resume_array *) arg;
for (ndx = 0; ndx < r->n; ndx++)
{
return 0;
}
- if (!lwp->need_step_over)
- {
- if (debug_threads)
- debug_printf ("Need step over [LWP %ld]? No\n", lwpid_of (thread));
- }
-
if (lwp->status_pending_p)
{
if (debug_threads)
"Old stop_pc was 0x%s, PC is now 0x%s\n",
lwpid_of (thread),
paddress (lwp->stop_pc), paddress (pc));
+ return 0;
+ }
+
+ /* On software single step target, resume the inferior with signal
+ rather than stepping over. */
+ if (can_software_single_step ()
+ && lwp->pending_signals != NULL
+ && lwp_signal_can_be_delivered (lwp))
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Ignoring, has pending"
+ " signals.\n",
+ lwpid_of (thread));
- lwp->need_step_over = 0;
return 0;
}
that find_inferior stops looking. */
current_thread = saved_thread;
- /* If the step over is cancelled, this is set again. */
- lwp->need_step_over = 0;
return 1;
}
}
of the way. If we let other threads run while we do that, they may
pass by the breakpoint location and miss hitting it. To avoid
that, a step-over momentarily stops all threads while LWP is
- single-stepped while the breakpoint is temporarily uninserted from
- the inferior. When the single-step finishes, we reinsert the
- breakpoint, and let all threads that are supposed to be running,
- run again.
-
- On targets that don't support hardware single-step, we don't
- currently support full software single-stepping. Instead, we only
- support stepping over the thread event breakpoint, by asking the
- low target where to place a reinsert breakpoint. Since this
- routine assumes the breakpoint being stepped over is a thread event
- breakpoint, it usually assumes the return address of the current
- function is a good enough place to set the reinsert breakpoint. */
+ single-stepped by either hardware or software while the breakpoint
+ is temporarily uninserted from the inferior. When the single-step
+ finishes, we reinsert the breakpoint, and let all threads that are
+ supposed to be running, run again. */
static int
start_step_over (struct lwp_info *lwp)
uninsert_breakpoints_at (pc);
uninsert_fast_tracepoint_jumps_at (pc);
- if (can_hardware_single_step ())
- {
- step = 1;
- }
- else
- {
- CORE_ADDR raddr = (*the_low_target.breakpoint_reinsert_addr) ();
- set_reinsert_breakpoint (raddr);
- step = 0;
- }
+ step = single_step (lwp);
current_thread = saved_thread;
}
/* Finish a step-over. Reinsert the breakpoint we had uninserted in
- start_step_over, if still there, and delete any reinsert
+ start_step_over, if still there, and delete any single-step
breakpoints we've set, on non hardware single-step targets. */
static int
{
if (lwp->bp_reinsert != 0)
{
+ struct thread_info *saved_thread = current_thread;
+
if (debug_threads)
debug_printf ("Finished step over.\n");
+ current_thread = get_lwp_thread (lwp);
+
/* Reinsert any breakpoint at LWP->BP_REINSERT. Note that there
may be no breakpoint to reinsert there by now. */
reinsert_breakpoints_at (lwp->bp_reinsert);
lwp->bp_reinsert = 0;
- /* Delete any software-single-step reinsert breakpoints. No
- longer needed. We don't have to worry about other threads
- hitting this trap, and later not being able to explain it,
- because we were stepping over a breakpoint, and we hold all
- threads but LWP stopped while doing that. */
+ /* Delete any single-step breakpoints. No longer needed. We
+ don't have to worry about other threads hitting this trap,
+ and later not being able to explain it, because we were
+ stepping over a breakpoint, and we hold all threads but
+ LWP stopped while doing that. */
if (!can_hardware_single_step ())
- delete_reinsert_breakpoints ();
+ {
+ gdb_assert (has_single_step_breakpoints (current_thread));
+ delete_single_step_breakpoints (current_thread);
+ }
step_over_bkpt = null_ptid;
+ current_thread = saved_thread;
return 1;
}
else
{
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lwp = get_thread_lwp (thread);
- int step;
int leave_all_stopped = * (int *) arg;
int leave_pending;
|| lwp->status_pending_p
|| leave_all_stopped);
+ /* If we have a new signal, enqueue the signal. */
+ if (lwp->resume->sig != 0)
+ {
+ siginfo_t info, *info_p;
+
+ /* If this is the same signal we were previously stopped by,
+ make sure to queue its siginfo. */
+ if (WIFSTOPPED (lwp->last_status)
+ && WSTOPSIG (lwp->last_status) == lwp->resume->sig
+ && ptrace (PTRACE_GETSIGINFO, lwpid_of (thread),
+ (PTRACE_TYPE_ARG3) 0, &info) == 0)
+ info_p = &info;
+ else
+ info_p = NULL;
+
+ enqueue_pending_signal (lwp, lwp->resume->sig, info_p);
+ }
+
if (!leave_pending)
{
if (debug_threads)
debug_printf ("resuming LWP %ld\n", lwpid_of (thread));
- step = (lwp->resume->kind == resume_step);
- linux_resume_one_lwp (lwp, step, lwp->resume->sig, NULL);
+ proceed_one_lwp (entry, NULL);
}
else
{
if (debug_threads)
debug_printf ("leaving LWP %ld stopped\n", lwpid_of (thread));
-
- /* If we have a new signal, enqueue the signal. */
- if (lwp->resume->sig != 0)
- {
- struct pending_signals *p_sig;
- p_sig = xmalloc (sizeof (*p_sig));
- p_sig->prev = lwp->pending_signals;
- p_sig->signal = lwp->resume->sig;
- memset (&p_sig->info, 0, sizeof (siginfo_t));
-
- /* If this is the same signal we were previously stopped by,
- make sure to queue its siginfo. We can ignore the return
- value of ptrace; if it fails, we'll skip
- PTRACE_SETSIGINFO. */
- if (WIFSTOPPED (lwp->last_status)
- && WSTOPSIG (lwp->last_status) == lwp->resume->sig)
- ptrace (PTRACE_GETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
- &p_sig->info);
-
- lwp->pending_signals = p_sig;
- }
}
thread->last_status.kind = TARGET_WAITKIND_IGNORE;
debug_printf ("linux_resume done\n");
debug_exit ();
}
+
+ /* We may have events that were pending that can/should be sent to
+ the client now. Trigger a linux_wait call. */
+ if (target_is_async_p ())
+ async_file_mark ();
}
/* This function is called once per thread. We check the thread's
if (debug_threads)
debug_printf (" stepping LWP %ld, client wants it stepping\n",
lwpid_of (thread));
- step = 1;
+
+ /* If resume_step is requested by GDB, install single-step
+ breakpoints when the thread is about to be actually resumed if
+ the single-step breakpoints weren't removed. */
+ if (can_software_single_step ()
+ && !has_single_step_breakpoints (thread))
+ install_software_single_step_breakpoints (lwp);
+
+ step = maybe_hw_step (thread);
}
else if (lwp->bp_reinsert != 0)
{
if (debug_threads)
debug_printf (" stepping LWP %ld, reinsert set\n",
lwpid_of (thread));
- step = 1;
+
+ step = maybe_hw_step (thread);
}
else
step = 0;
dr_offset = regset - info->regsets;
if (info->disabled_regsets == NULL)
- info->disabled_regsets = xcalloc (1, info->num_regsets);
+ info->disabled_regsets = (char *) xcalloc (1, info->num_regsets);
info->disabled_regsets[dr_offset] = 1;
}
not "active". This can happen in normal operation,
so suppress the warning in this case. */
}
+ else if (errno == ESRCH)
+ {
+ /* At this point, ESRCH should mean the process is
+ already gone, in which case we simply ignore attempts
+ to read its registers. */
+ }
else
{
char s[256];
#ifdef HAVE_LINUX_USRREGS
-int
+static int
register_addr (const struct usrregs_info *usrregs, int regnum)
{
int addr;
size = ((register_size (regcache->tdesc, regno)
+ sizeof (PTRACE_XFER_TYPE) - 1)
& -sizeof (PTRACE_XFER_TYPE));
- buf = alloca (size);
+ buf = (char *) alloca (size);
pid = lwpid_of (current_thread);
for (i = 0; i < size; i += sizeof (PTRACE_XFER_TYPE))
size = ((register_size (regcache->tdesc, regno)
+ sizeof (PTRACE_XFER_TYPE) - 1)
& -sizeof (PTRACE_XFER_TYPE));
- buf = alloca (size);
+ buf = (char *) alloca (size);
memset (buf, 0, size);
if (the_low_target.collect_ptrace_register)
#endif
-void
+static void
linux_fetch_registers (struct regcache *regcache, int regno)
{
int use_regsets;
}
}
-void
+static void
linux_store_registers (struct regcache *regcache, int regno)
{
int use_regsets;
count = ((((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
/ sizeof (PTRACE_XFER_TYPE));
/* Allocate buffer of that many longwords. */
- buffer = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
+ buffer = XALLOCAVEC (PTRACE_XFER_TYPE, count);
/* Read all the longwords */
errno = 0;
/ sizeof (PTRACE_XFER_TYPE);
/* Allocate buffer of that many longwords. */
- register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
- alloca (count * sizeof (PTRACE_XFER_TYPE));
+ register PTRACE_XFER_TYPE *buffer = XALLOCAVEC (PTRACE_XFER_TYPE, count);
int pid = lwpid_of (current_thread);
if (proc->priv->thread_db != NULL)
return;
- /* If the kernel supports tracing clones, then we don't need to
- use the magic thread event breakpoint to learn about
- threads. */
- thread_db_init (!linux_supports_traceclone ());
+ thread_db_init ();
#endif
}
return USE_SIGTRAP_SIGINFO;
}
-/* Implement the supports_conditional_breakpoints target_ops
- method. */
+/* Implement the supports_hardware_single_step target_ops method. */
static int
-linux_supports_conditional_breakpoints (void)
+linux_supports_hardware_single_step (void)
{
- /* GDBserver needs to step over the breakpoint if the condition is
- false. GDBserver software single step is too simple, so disable
- conditional breakpoints if the target doesn't have hardware single
- step. */
return can_hardware_single_step ();
}
+static int
+linux_supports_software_single_step (void)
+{
+ return can_software_single_step ();
+}
+
static int
linux_stopped_by_watchpoint (void)
{
layout of the inferiors' architecture. */
static void
-siginfo_fixup (siginfo_t *siginfo, void *inf_siginfo, int direction)
+siginfo_fixup (siginfo_t *siginfo, gdb_byte *inf_siginfo, int direction)
{
int done = 0;
{
int pid;
siginfo_t siginfo;
- char inf_siginfo[sizeof (siginfo_t)];
+ gdb_byte inf_siginfo[sizeof (siginfo_t)];
if (current_thread == NULL)
return -1;
return linux_supports_tracefork ();
}
+/* Check if exec events are supported. */
+
+static int
+linux_supports_exec_events (void)
+{
+ return linux_supports_traceexec ();
+}
+
/* Callback for 'find_inferior'. Set the (possibly changed) ptrace
options for the specified lwp. */
#endif /* defined PT_GETDSBT || defined PTRACE_GETFDPIC */
static void
-linux_process_qsupported (const char *query)
+linux_process_qsupported (char **features, int count)
{
if (the_low_target.process_qsupported != NULL)
- the_low_target.process_qsupported (query);
+ the_low_target.process_qsupported (features, count);
+}
+
+static int
+linux_supports_catch_syscall (void)
+{
+ return (the_low_target.get_syscall_trapinfo != NULL
+ && linux_supports_tracesysgood ());
+}
+
+static int
+linux_get_ipa_tdesc_idx (void)
+{
+ if (the_low_target.get_ipa_tdesc_idx == NULL)
+ return 0;
+
+ return (*the_low_target.get_ipa_tdesc_idx) ();
}
static int
return 0;
gdb_assert (num_phdr < 100); /* Basic sanity check. */
- phdr_buf = alloca (num_phdr * phdr_size);
+ phdr_buf = (unsigned char *) alloca (num_phdr * phdr_size);
if (linux_read_memory (phdr_memaddr, phdr_buf, num_phdr * phdr_size))
return 0;
if (is_elf64)
{
Elf64_Dyn *const dyn = (Elf64_Dyn *) buf;
-#ifdef DT_MIPS_RLD_MAP
+#if defined DT_MIPS_RLD_MAP || defined DT_MIPS_RLD_MAP_REL
union
{
Elf64_Xword map;
unsigned char buf[sizeof (Elf64_Xword)];
}
rld_map;
-
+#endif
+#ifdef DT_MIPS_RLD_MAP
if (dyn->d_tag == DT_MIPS_RLD_MAP)
{
if (linux_read_memory (dyn->d_un.d_val,
break;
}
#endif /* DT_MIPS_RLD_MAP */
+#ifdef DT_MIPS_RLD_MAP_REL
+ if (dyn->d_tag == DT_MIPS_RLD_MAP_REL)
+ {
+ if (linux_read_memory (dyn->d_un.d_val + dynamic_memaddr,
+ rld_map.buf, sizeof (rld_map.buf)) == 0)
+ return rld_map.map;
+ else
+ break;
+ }
+#endif /* DT_MIPS_RLD_MAP_REL */
if (dyn->d_tag == DT_DEBUG && map == -1)
map = dyn->d_un.d_val;
else
{
Elf32_Dyn *const dyn = (Elf32_Dyn *) buf;
-#ifdef DT_MIPS_RLD_MAP
+#if defined DT_MIPS_RLD_MAP || defined DT_MIPS_RLD_MAP_REL
union
{
Elf32_Word map;
unsigned char buf[sizeof (Elf32_Word)];
}
rld_map;
-
+#endif
+#ifdef DT_MIPS_RLD_MAP
if (dyn->d_tag == DT_MIPS_RLD_MAP)
{
if (linux_read_memory (dyn->d_un.d_val,
break;
}
#endif /* DT_MIPS_RLD_MAP */
+#ifdef DT_MIPS_RLD_MAP_REL
+ if (dyn->d_tag == DT_MIPS_RLD_MAP_REL)
+ {
+ if (linux_read_memory (dyn->d_un.d_val + dynamic_memaddr,
+ rld_map.buf, sizeof (rld_map.buf)) == 0)
+ return rld_map.map;
+ else
+ break;
+ }
+#endif /* DT_MIPS_RLD_MAP_REL */
if (dyn->d_tag == DT_DEBUG && map == -1)
map = dyn->d_un.d_val;
}
}
- document = xmalloc (allocated);
+ document = (char *) xmalloc (allocated);
strcpy (document, "<library-list-svr4 version=\"1.0\"");
p = document + strlen (document);
/* Expand to guarantee sufficient storage. */
uintptr_t document_len = p - document;
- document = xrealloc (document, 2 * allocated);
+ document = (char *) xrealloc (document, 2 * allocated);
allocated *= 2;
p = document + document_len;
}
#ifdef HAVE_LINUX_BTRACE
-/* See to_enable_btrace target method. */
-
-static struct btrace_target_info *
-linux_low_enable_btrace (ptid_t ptid, const struct btrace_config *conf)
-{
- struct btrace_target_info *tinfo;
-
- tinfo = linux_enable_btrace (ptid, conf);
-
- if (tinfo != NULL && tinfo->ptr_bits == 0)
- {
- struct thread_info *thread = find_thread_ptid (ptid);
- struct regcache *regcache = get_thread_regcache (thread, 0);
-
- tinfo->ptr_bits = register_size (regcache->tdesc, 0) * 8;
- }
-
- return tinfo;
-}
-
/* See to_disable_btrace target method. */
static int
return (err == BTRACE_ERR_NONE ? 0 : -1);
}
-/* Encode an Intel(R) Processor Trace configuration. */
+/* Encode an Intel Processor Trace configuration. */
static void
linux_low_encode_pt_config (struct buffer *buffer,
static int
linux_low_read_btrace (struct btrace_target_info *tinfo, struct buffer *buffer,
- int type)
+ enum btrace_read_type type)
{
struct btrace_data btrace;
struct btrace_block *block;
return ptid_of (current_thread);
}
+/* Implementation of the target_ops method "breakpoint_kind_from_pc". */
+
+static int
+linux_breakpoint_kind_from_pc (CORE_ADDR *pcptr)
+{
+ if (the_low_target.breakpoint_kind_from_pc != NULL)
+ return (*the_low_target.breakpoint_kind_from_pc) (pcptr);
+ else
+ return default_breakpoint_kind_from_pc (pcptr);
+}
+
+/* Implementation of the target_ops method "sw_breakpoint_from_kind". */
+
+static const gdb_byte *
+linux_sw_breakpoint_from_kind (int kind, int *size)
+{
+ gdb_assert (the_low_target.sw_breakpoint_from_kind != NULL);
+
+ return (*the_low_target.sw_breakpoint_from_kind) (kind, size);
+}
+
+/* Implementation of the target_ops method
+ "breakpoint_kind_from_current_state". */
+
+static int
+linux_breakpoint_kind_from_current_state (CORE_ADDR *pcptr)
+{
+ if (the_low_target.breakpoint_kind_from_current_state != NULL)
+ return (*the_low_target.breakpoint_kind_from_current_state) (pcptr);
+ else
+ return linux_breakpoint_kind_from_pc (pcptr);
+}
+
+/* Default implementation of linux_target_ops method "set_pc" for
+ 32-bit pc register which is literally named "pc". */
+
+void
+linux_set_pc_32bit (struct regcache *regcache, CORE_ADDR pc)
+{
+ uint32_t newpc = pc;
+
+ supply_register_by_name (regcache, "pc", &newpc);
+}
+
+/* Default implementation of linux_target_ops method "get_pc" for
+ 32-bit pc register which is literally named "pc". */
+
+CORE_ADDR
+linux_get_pc_32bit (struct regcache *regcache)
+{
+ uint32_t pc;
+
+ collect_register_by_name (regcache, "pc", &pc);
+ if (debug_threads)
+ debug_printf ("stop pc is 0x%" PRIx32 "\n", pc);
+ return pc;
+}
+
+/* Default implementation of linux_target_ops method "set_pc" for
+ 64-bit pc register which is literally named "pc". */
+
+void
+linux_set_pc_64bit (struct regcache *regcache, CORE_ADDR pc)
+{
+ uint64_t newpc = pc;
+
+ supply_register_by_name (regcache, "pc", &newpc);
+}
+
+/* Default implementation of linux_target_ops method "get_pc" for
+ 64-bit pc register which is literally named "pc". */
+
+CORE_ADDR
+linux_get_pc_64bit (struct regcache *regcache)
+{
+ uint64_t pc;
+
+ collect_register_by_name (regcache, "pc", &pc);
+ if (debug_threads)
+ debug_printf ("stop pc is 0x%" PRIx64 "\n", pc);
+ return pc;
+}
+
+
static struct target_ops linux_target_ops = {
linux_create_inferior,
- linux_arch_setup,
+ linux_post_create_inferior,
linux_attach,
linux_kill,
linux_detach,
linux_supports_stopped_by_sw_breakpoint,
linux_stopped_by_hw_breakpoint,
linux_supports_stopped_by_hw_breakpoint,
- linux_supports_conditional_breakpoints,
+ linux_supports_hardware_single_step,
linux_stopped_by_watchpoint,
linux_stopped_data_address,
#if defined(__UCLIBC__) && defined(HAS_NOMMU) \
linux_supports_multi_process,
linux_supports_fork_events,
linux_supports_vfork_events,
+ linux_supports_exec_events,
linux_handle_new_gdb_connection,
#ifdef USE_THREAD_DB
thread_db_handle_monitor_command,
linux_supports_agent,
#ifdef HAVE_LINUX_BTRACE
linux_supports_btrace,
- linux_low_enable_btrace,
+ linux_enable_btrace,
linux_low_disable_btrace,
linux_low_read_btrace,
linux_low_btrace_conf,
linux_mntns_open_cloexec,
linux_mntns_unlink,
linux_mntns_readlink,
+ linux_breakpoint_kind_from_pc,
+ linux_sw_breakpoint_from_kind,
+ linux_proc_tid_get_name,
+ linux_breakpoint_kind_from_current_state,
+ linux_supports_software_single_step,
+ linux_supports_catch_syscall,
+ linux_get_ipa_tdesc_idx,
};
-static void
-linux_init_signals ()
-{
- /* FIXME drow/2002-06-09: As above, we should check with LinuxThreads
- to find what the cancel signal actually is. */
-#ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
- signal (__SIGRTMIN+1, SIG_IGN);
-#endif
-}
-
#ifdef HAVE_LINUX_REGSETS
void
initialize_regsets_info (struct regsets_info *info)
initialize_low (void)
{
struct sigaction sigchld_action;
+
memset (&sigchld_action, 0, sizeof (sigchld_action));
set_target_ops (&linux_target_ops);
- set_breakpoint_data (the_low_target.breakpoint,
- the_low_target.breakpoint_len);
- linux_init_signals ();
+
linux_ptrace_init_warnings ();
sigchld_action.sa_handler = sigchld_handler;
projects / thirdparty / binutils-gdb.git / blobdiff