/* Remote utility routines for the remote server for GDB.
Copyright (C) 1986, 1989, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
- 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GDB.
#include "server.h"
#include "terminal.h"
+#include "target.h"
#include <stdio.h>
#include <string.h>
#if HAVE_SYS_IOCTL_H
#include <winsock.h>
#endif
+#if __QNX__
+#include <sys/iomgr.h>
+#endif /* __QNX__ */
+
#ifndef HAVE_SOCKLEN_T
typedef int socklen_t;
#endif
/* A cache entry for a successfully looked-up symbol. */
struct sym_cache
{
- const char *name;
+ char *name;
CORE_ADDR addr;
struct sym_cache *next;
};
-/* The symbol cache. */
-static struct sym_cache *symbol_cache;
-
-/* If this flag has been set, assume cache misses are
- failures. */
-int all_symbols_looked_up;
-
int remote_debug = 0;
struct ui_file *gdb_stdlog;
fcntl (remote_desc, F_SETOWN, getpid ());
#endif
#endif
+
+ /* Register the event loop handler. */
+ add_file_handler (remote_desc, handle_serial_event, NULL);
}
void
remote_close (void)
{
+ delete_file_handler (remote_desc);
+
#ifdef USE_WIN32API
closesocket (remote_desc);
#else
return 0;
}
+static const char hexchars[] = "0123456789abcdef";
+
+static int
+ishex (int ch, int *val)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ {
+ *val = ch - 'a' + 10;
+ return 1;
+ }
+ if ((ch >= 'A') && (ch <= 'F'))
+ {
+ *val = ch - 'A' + 10;
+ return 1;
+ }
+ if ((ch >= '0') && (ch <= '9'))
+ {
+ *val = ch - '0';
+ return 1;
+ }
+ return 0;
+}
+
int
unhexify (char *bin, const char *hex, int count)
{
return n + 1;
}
+char *
+unpack_varlen_hex (char *buff, /* packet to parse */
+ ULONGEST *result)
+{
+ int nibble;
+ ULONGEST retval = 0;
+
+ while (ishex (*buff, &nibble))
+ {
+ buff++;
+ retval = retval << 4;
+ retval |= nibble & 0x0f;
+ }
+ *result = retval;
+ return buff;
+}
+
+/* Write a PTID to BUF. Returns BUF+CHARACTERS_WRITTEN. */
+
+char *
+write_ptid (char *buf, ptid_t ptid)
+{
+ int pid, tid;
+
+ if (multi_process)
+ {
+ pid = ptid_get_pid (ptid);
+ if (pid < 0)
+ buf += sprintf (buf, "p-%x.", -pid);
+ else
+ buf += sprintf (buf, "p%x.", pid);
+ }
+ tid = ptid_get_lwp (ptid);
+ if (tid < 0)
+ buf += sprintf (buf, "-%x", -tid);
+ else
+ buf += sprintf (buf, "%x", tid);
+
+ return buf;
+}
+
+ULONGEST
+hex_or_minus_one (char *buf, char **obuf)
+{
+ ULONGEST ret;
+
+ if (strncmp (buf, "-1", 2) == 0)
+ {
+ ret = (ULONGEST) -1;
+ buf += 2;
+ }
+ else
+ buf = unpack_varlen_hex (buf, &ret);
+
+ if (obuf)
+ *obuf = buf;
+
+ return ret;
+}
+
+/* Extract a PTID from BUF. If non-null, OBUF is set to the to one
+ passed the last parsed char. Returns null_ptid on error. */
+ptid_t
+read_ptid (char *buf, char **obuf)
+{
+ char *p = buf;
+ char *pp;
+ ULONGEST pid = 0, tid = 0;
+
+ if (*p == 'p')
+ {
+ /* Multi-process ptid. */
+ pp = unpack_varlen_hex (p + 1, &pid);
+ if (*pp != '.')
+ error ("invalid remote ptid: %s\n", p);
+
+ p = pp + 1;
+
+ tid = hex_or_minus_one (p, &pp);
+
+ if (obuf)
+ *obuf = pp;
+ return ptid_build (pid, tid, 0);
+ }
+
+ /* No multi-process. Just a tid. */
+ tid = hex_or_minus_one (p, &pp);
+
+ /* Since the stub is not sending a process id, then default to
+ what's in the current inferior. */
+ pid = ptid_get_pid (((struct inferior_list_entry *) current_inferior)->id);
+
+ if (obuf)
+ *obuf = pp;
+ return ptid_build (pid, tid, 0);
+}
+
/* Send a packet to the remote machine, with error checking.
The data of the packet is in BUF, and the length of the
packet is in CNT. Returns >= 0 on success, -1 otherwise. */
-int
-putpkt_binary (char *buf, int cnt)
+static int
+putpkt_binary_1 (char *buf, int cnt, int is_notif)
{
int i;
unsigned char csum = 0;
and giving it a checksum. */
p = buf2;
- *p++ = '$';
+ if (is_notif)
+ *p++ = '%';
+ else
+ *p++ = '$';
for (i = 0; i < cnt;)
i += try_rle (buf + i, cnt - i, &csum, &p);
return -1;
}
- if (noack_mode)
+ if (noack_mode || is_notif)
{
/* Don't expect an ack then. */
if (remote_debug)
{
- fprintf (stderr, "putpkt (\"%s\"); [noack mode]\n", buf2);
+ if (is_notif)
+ fprintf (stderr, "putpkt (\"%s\"); [notif]\n", buf2);
+ else
+ fprintf (stderr, "putpkt (\"%s\"); [noack mode]\n", buf2);
fflush (stderr);
}
break;
return 1; /* Success! */
}
+int
+putpkt_binary (char *buf, int cnt)
+{
+ return putpkt_binary_1 (buf, cnt, 0);
+}
+
/* Send a packet to the remote machine, with error checking. The data
of the packet is in BUF, and the packet should be a NUL-terminated
string. Returns >= 0 on success, -1 otherwise. */
return putpkt_binary (buf, strlen (buf));
}
+int
+putpkt_notif (char *buf)
+{
+ return putpkt_binary_1 (buf, strlen (buf), 1);
+}
+
/* Come here when we get an input interrupt from the remote side. This
interrupt should only be active while we are waiting for the child to do
something. About the only thing that should come through is a ^C, which
#endif
}
+#ifdef __QNX__
+static void
+nto_comctrl (int enable)
+{
+ struct sigevent event;
+
+ if (enable)
+ {
+ event.sigev_notify = SIGEV_SIGNAL_THREAD;
+ event.sigev_signo = SIGIO;
+ event.sigev_code = 0;
+ event.sigev_value.sival_ptr = NULL;
+ event.sigev_priority = -1;
+ ionotify (remote_desc, _NOTIFY_ACTION_POLLARM, _NOTIFY_COND_INPUT,
+ &event);
+ }
+ else
+ ionotify (remote_desc, _NOTIFY_ACTION_POLL, _NOTIFY_COND_INPUT, NULL);
+}
+#endif /* __QNX__ */
+
+
/* Current state of asynchronous I/O. */
static int async_io_enabled;
signal (SIGIO, input_interrupt);
#endif
async_io_enabled = 1;
+#ifdef __QNX__
+ nto_comctrl (1);
+#endif /* __QNX__ */
}
/* Disable asynchronous I/O. */
signal (SIGIO, SIG_IGN);
#endif
async_io_enabled = 0;
+#ifdef __QNX__
+ nto_comctrl (0);
+#endif /* __QNX__ */
+
}
void
}
void
-prepare_resume_reply (char *buf, char status, unsigned char sig)
+prepare_resume_reply (char *buf, ptid_t ptid,
+ struct target_waitstatus *status)
{
- int nib;
-
- *buf++ = status;
-
- nib = ((sig & 0xf0) >> 4);
- *buf++ = tohex (nib);
- nib = sig & 0x0f;
- *buf++ = tohex (nib);
+ if (debug_threads)
+ fprintf (stderr, "Writing resume reply for %s:%d\n\n",
+ target_pid_to_str (ptid), status->kind);
- if (status == 'T')
+ switch (status->kind)
{
- const char **regp = gdbserver_expedite_regs;
+ case TARGET_WAITKIND_STOPPED:
+ {
+ struct thread_info *saved_inferior;
+ const char **regp;
- if (the_target->stopped_by_watchpoint != NULL
- && (*the_target->stopped_by_watchpoint) ())
- {
- CORE_ADDR addr;
- int i;
+ sprintf (buf, "T%02x", status->value.sig);
+ buf += strlen (buf);
- strncpy (buf, "watch:", 6);
- buf += 6;
+ regp = gdbserver_expedite_regs;
- addr = (*the_target->stopped_data_address) ();
+ saved_inferior = current_inferior;
- /* Convert each byte of the address into two hexadecimal chars.
- Note that we take sizeof (void *) instead of sizeof (addr);
- this is to avoid sending a 64-bit address to a 32-bit GDB. */
- for (i = sizeof (void *) * 2; i > 0; i--)
- {
- *buf++ = tohex ((addr >> (i - 1) * 4) & 0xf);
- }
- *buf++ = ';';
- }
+ current_inferior = find_thread_ptid (ptid);
- while (*regp)
- {
- buf = outreg (find_regno (*regp), buf);
- regp ++;
- }
+ if (the_target->stopped_by_watchpoint != NULL
+ && (*the_target->stopped_by_watchpoint) ())
+ {
+ CORE_ADDR addr;
+ int i;
- /* Formerly, if the debugger had not used any thread features we would not
- burden it with a thread status response. This was for the benefit of
- GDB 4.13 and older. However, in recent GDB versions the check
- (``if (cont_thread != 0)'') does not have the desired effect because of
- sillyness in the way that the remote protocol handles specifying a thread.
- Since thread support relies on qSymbol support anyway, assume GDB can handle
- threads. */
+ strncpy (buf, "watch:", 6);
+ buf += 6;
- if (using_threads && !disable_packet_Tthread)
- {
- unsigned int gdb_id_from_wait;
-
- /* FIXME right place to set this? */
- thread_from_wait = ((struct inferior_list_entry *)current_inferior)->id;
- gdb_id_from_wait = thread_to_gdb_id (current_inferior);
-
- if (debug_threads)
- fprintf (stderr, "Writing resume reply for %ld\n\n", thread_from_wait);
- /* This if (1) ought to be unnecessary. But remote_wait in GDB
- will claim this event belongs to inferior_ptid if we do not
- specify a thread, and there's no way for gdbserver to know
- what inferior_ptid is. */
- if (1 || old_thread_from_wait != thread_from_wait)
- {
- general_thread = thread_from_wait;
- sprintf (buf, "thread:%x;", gdb_id_from_wait);
- buf += strlen (buf);
- old_thread_from_wait = thread_from_wait;
- }
- }
+ addr = (*the_target->stopped_data_address) ();
- if (dlls_changed)
- {
- strcpy (buf, "library:;");
- buf += strlen (buf);
- dlls_changed = 0;
- }
+ /* Convert each byte of the address into two hexadecimal
+ chars. Note that we take sizeof (void *) instead of
+ sizeof (addr); this is to avoid sending a 64-bit
+ address to a 32-bit GDB. */
+ for (i = sizeof (void *) * 2; i > 0; i--)
+ *buf++ = tohex ((addr >> (i - 1) * 4) & 0xf);
+ *buf++ = ';';
+ }
+
+ while (*regp)
+ {
+ buf = outreg (find_regno (*regp), buf);
+ regp ++;
+ }
+ *buf = '\0';
+
+ /* Formerly, if the debugger had not used any thread features
+ we would not burden it with a thread status response. This
+ was for the benefit of GDB 4.13 and older. However, in
+ recent GDB versions the check (``if (cont_thread != 0)'')
+ does not have the desired effect because of sillyness in
+ the way that the remote protocol handles specifying a
+ thread. Since thread support relies on qSymbol support
+ anyway, assume GDB can handle threads. */
+
+ if (using_threads && !disable_packet_Tthread)
+ {
+ /* This if (1) ought to be unnecessary. But remote_wait
+ in GDB will claim this event belongs to inferior_ptid
+ if we do not specify a thread, and there's no way for
+ gdbserver to know what inferior_ptid is. */
+ if (1 || !ptid_equal (general_thread, ptid))
+ {
+ int core = -1;
+ /* In non-stop, don't change the general thread behind
+ GDB's back. */
+ if (!non_stop)
+ general_thread = ptid;
+ sprintf (buf, "thread:");
+ buf += strlen (buf);
+ buf = write_ptid (buf, ptid);
+ strcat (buf, ";");
+ buf += strlen (buf);
+
+ if (the_target->core_of_thread)
+ core = (*the_target->core_of_thread) (ptid);
+ if (core != -1)
+ {
+ sprintf (buf, "core:");
+ buf += strlen (buf);
+ sprintf (buf, "%x", core);
+ strcat (buf, ";");
+ buf += strlen (buf);
+ }
+ }
+ }
+
+ if (dlls_changed)
+ {
+ strcpy (buf, "library:;");
+ buf += strlen (buf);
+ dlls_changed = 0;
+ }
+
+ current_inferior = saved_inferior;
+ }
+ break;
+ case TARGET_WAITKIND_EXITED:
+ if (multi_process)
+ sprintf (buf, "W%x;process:%x",
+ status->value.integer, ptid_get_pid (ptid));
+ else
+ sprintf (buf, "W%02x", status->value.integer);
+ break;
+ case TARGET_WAITKIND_SIGNALLED:
+ if (multi_process)
+ sprintf (buf, "X%x;process:%x",
+ status->value.sig, ptid_get_pid (ptid));
+ else
+ sprintf (buf, "X%02x", status->value.sig);
+ break;
+ default:
+ error ("unhandled waitkind");
+ break;
}
- /* For W and X, we're done. */
- *buf++ = 0;
}
void
return 0;
}
+static void
+free_sym_cache (struct sym_cache *sym)
+{
+ if (sym != NULL)
+ {
+ free (sym->name);
+ free (sym);
+ }
+}
+
+void
+clear_symbol_cache (struct sym_cache **symcache_p)
+{
+ struct sym_cache *sym, *next;
+
+ /* Check the cache first. */
+ for (sym = *symcache_p; sym; sym = next)
+ {
+ next = sym->next;
+ free_sym_cache (sym);
+ }
+
+ *symcache_p = NULL;
+}
+
/* Ask GDB for the address of NAME, and return it in ADDRP if found.
Returns 1 if the symbol is found, 0 if it is not, -1 on error. */
char own_buf[266], *p, *q;
int len;
struct sym_cache *sym;
+ struct process_info *proc;
+
+ proc = current_process ();
/* Check the cache first. */
- for (sym = symbol_cache; sym; sym = sym->next)
+ for (sym = proc->symbol_cache; sym; sym = sym->next)
if (strcmp (name, sym->name) == 0)
{
*addrp = sym->addr;
in any libraries loaded after that point, only in symbols in
libpthread.so. It might not be an appropriate time to look
up a symbol, e.g. while we're trying to fetch registers. */
- if (all_symbols_looked_up)
+ if (proc->all_symbols_looked_up)
return 0;
/* Send the request. */
sym = xmalloc (sizeof (*sym));
sym->name = xstrdup (name);
sym->addr = *addrp;
- sym->next = symbol_cache;
- symbol_cache = sym;
+ sym->next = proc->symbol_cache;
+ proc->symbol_cache = sym;
return 1;
}
prev = f + 1;
}
break;
+ case 'd':
+ {
+ int i = va_arg (ap, int);
+ char b[sizeof ("4294967295")];
+
+ buffer_grow (buffer, prev, f - prev - 1);
+ sprintf (b, "%d", i);
+ buffer_grow_str (buffer, b);
+ prev = f + 1;
+ }
}
percent = 0;
}
projects / thirdparty / binutils-gdb.git / blobdiff