/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
- Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
+#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
#include "value.h"
#include "observer.h"
#include "language.h"
+#include "solib.h"
+#include "main.h"
+
#include "gdb_assert.h"
+#include "mi/mi-common.h"
/* Prototypes for local functions */
static int hook_stop_stub (void *);
-static void delete_breakpoint_current_contents (void *);
-
static int restore_selected_frame (void *);
static void build_infrun (void);
no line number information. The normal behavior is that we step
over such function. */
int step_stop_if_no_debug = 0;
+static void
+show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
+}
/* In asynchronous mode, but simulating synchronous execution. */
static int may_follow_exec = MAY_FOLLOW_EXEC;
+static int debug_infrun = 0;
+static void
+show_debug_infrun (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Inferior debugging is %s.\n"), value);
+}
+
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
signalling an error, which will obscure the change in the
inferior's state. */
-#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE
-#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
-#endif
-
/* This function returns TRUE if pc is the address of an instruction
that lies within the dynamic linker (such as the event hook, or the
dld itself).
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* On MIPS16, a function that returns a floating point value may call
- a library helper function to copy the return value to a floating point
- register. The IGNORE_HELPER_CALL macro returns non-zero if we
- should ignore (i.e. step over) this function call. */
-#ifndef IGNORE_HELPER_CALL
-#define IGNORE_HELPER_CALL(pc) 0
-#endif
-
-/* On some systems, the PC may be left pointing at an instruction that won't
- actually be executed. This is usually indicated by a bit in the PSW. If
- we find ourselves in such a state, then we step the target beyond the
- nullified instruction before returning control to the user so as to avoid
- confusion. */
-
-#ifndef INSTRUCTION_NULLIFIED
-#define INSTRUCTION_NULLIFIED 0
-#endif
-
-/* We can't step off a permanent breakpoint in the ordinary way, because we
- can't remove it. Instead, we have to advance the PC to the next
- instruction. This macro should expand to a pointer to a function that
- does that, or zero if we have no such function. If we don't have a
- definition for it, we have to report an error. */
-#ifndef SKIP_PERMANENT_BREAKPOINT
-#define SKIP_PERMANENT_BREAKPOINT (default_skip_permanent_breakpoint)
-static void
-default_skip_permanent_breakpoint (void)
-{
- error ("\
-The program is stopped at a permanent breakpoint, but GDB does not know\n\
-how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution.");
-}
-#endif
-
/* Convert the #defines into values. This is temporary until wfi control
flow is completely sorted out. */
-#ifndef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 0
-#else
-#undef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 1
-#endif
-
#ifndef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 0
#else
static int trap_expected;
-#ifdef SOLIB_ADD
/* Nonzero if we want to give control to the user when we're notified
of shared library events by the dynamic linker. */
static int stop_on_solib_events;
-#endif
-
-#ifdef HP_OS_BUG
-/* Nonzero if the next time we try to continue the inferior, it will
- step one instruction and generate a spurious trace trap.
- This is used to compensate for a bug in HP-UX. */
-
-static int trap_expected_after_continue;
-#endif
+static void
+show_stop_on_solib_events (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Stopping for shared library events is %s.\n"),
+ value);
+}
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
struct regcache *stop_registers;
-/* Nonzero if program stopped due to error trying to insert breakpoints. */
-
-static int breakpoints_failed;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
static struct breakpoint *step_resume_breakpoint = NULL;
-static struct breakpoint *through_sigtramp_breakpoint = NULL;
-
-/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
- interactions with an inferior that is running a kernel function
- (aka, a system call or "syscall"). wait_for_inferior therefore
- may have a need to know when the inferior is in a syscall. This
- is a count of the number of inferior threads which are known to
- currently be running in a syscall. */
-static int number_of_threads_in_syscalls;
/* This is a cached copy of the pid/waitstatus of the last event
returned by target_wait()/deprecated_target_wait_hook(). This
};
static const char *follow_fork_mode_string = follow_fork_mode_parent;
+static void
+show_follow_fork_mode_string (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Debugger response to a program call of fork or vfork is \"%s\".\n"),
+ value);
+}
\f
static int
step_range_start = 0;
step_range_end = 0;
- /* If there was one, it's gone now. */
- through_sigtramp_breakpoint = NULL;
-
/* What is this a.out's name? */
- printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+ printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
tgt = find_run_target ();
/* If we can't find one, things are in a very strange state... */
if (tgt == NULL)
- error ("Could find run target to save before following exec");
+ error (_("Could find run target to save before following exec"));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
#endif
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
+#else
+ solib_create_inferior_hook ();
#endif
/* Reinsert all breakpoints. (Those which were symbolic have
/* The thread we inserted single-step breakpoints for. */
static ptid_t singlestep_ptid;
+/* PC when we started this single-step. */
+static CORE_ADDR singlestep_pc;
+
/* If another thread hit the singlestep breakpoint, we save the original
thread here so that we can resume single-stepping it later. */
static ptid_t saved_singlestep_ptid;
static const char schedlock_off[] = "off";
static const char schedlock_on[] = "on";
static const char schedlock_step[] = "step";
-static const char *scheduler_mode = schedlock_off;
static const char *scheduler_enums[] = {
schedlock_off,
schedlock_on,
schedlock_step,
NULL
};
+static const char *scheduler_mode = schedlock_off;
+static void
+show_scheduler_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Mode for locking scheduler during execution is \"%s\".\n"),
+ value);
+}
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
{
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunately, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
- if (cmd_type (c) == set_cmd)
- if (!target_can_lock_scheduler)
- {
- scheduler_mode = schedlock_off;
- error ("Target '%s' cannot support this command.", target_shortname);
- }
+ if (!target_can_lock_scheduler)
+ {
+ scheduler_mode = schedlock_off;
+ error (_("Target '%s' cannot support this command."), target_shortname);
+ }
}
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
+ step, sig);
+
/* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
- SKIP_PERMANENT_BREAKPOINT ();
+ {
+ if (gdbarch_skip_permanent_breakpoint_p (current_gdbarch))
+ gdbarch_skip_permanent_breakpoint (current_gdbarch,
+ get_current_regcache ());
+ else
+ error (_("\
+The program is stopped at a permanent breakpoint, but GDB does not know\n\
+how to step past a permanent breakpoint on this architecture. Try using\n\
+a command like `return' or `jump' to continue execution."));
+ }
if (SOFTWARE_SINGLE_STEP_P () && step)
{
/* Do it the hard way, w/temp breakpoints */
- SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ );
- /* ...and don't ask hardware to do it. */
- step = 0;
- /* and do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
- singlestep_breakpoints_inserted_p = 1;
- singlestep_ptid = inferior_ptid;
+ if (SOFTWARE_SINGLE_STEP (get_current_frame ()))
+ {
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = read_pc ();
+ }
}
- /* Handle any optimized stores to the inferior NOW... */
-#ifdef DO_DEFERRED_STORES
- DO_DEFERRED_STORES;
-#endif
-
/* If there were any forks/vforks/execs that were caught and are
now to be followed, then do so. */
switch (pending_follow.kind)
resume_ptid = RESUME_ALL; /* Default */
- if ((step || singlestep_breakpoints_inserted_p) &&
- (stepping_past_singlestep_breakpoint
- || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
+ if ((step || singlestep_breakpoints_inserted_p)
+ && (stepping_past_singlestep_breakpoint
+ || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
{
/* Stepping past a breakpoint without inserting breakpoints.
Make sure only the current thread gets to step, so that
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on) ||
- (scheduler_mode == schedlock_step &&
- (step || singlestep_breakpoints_inserted_p)))
+ if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
}
- if (CANNOT_STEP_BREAKPOINT)
+ if (gdbarch_cannot_step_breakpoint (current_gdbarch))
{
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
/* Make sure we were stopped either at a breakpoint, or because
of a Ctrl-C. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
- wait_status.value.sig != TARGET_SIGNAL_INT))
+ || (wait_status.value.sig != TARGET_SIGNAL_TRAP
+ && wait_status.value.sig != TARGET_SIGNAL_INT))
{
return 0;
}
/* FIXME: This stuff came from switch_to_thread() in
thread.c (which should probably be a public function). */
- flush_cached_frames ();
+ reinit_frame_cache ();
registers_changed ();
stop_pc = wait_pc;
- select_frame (get_current_frame ());
}
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- return 1;
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ if (breakpoint_here_p (wait_pc))
+ return 1;
}
return 0;
-
+
}
/* Record the pc of the program the last time it stopped. This is
if (addr == (CORE_ADDR) -1)
{
- /* If there is a breakpoint at the address we will resume at,
- step one instruction before inserting breakpoints
- so that we do not stop right away (and report a second
- hit at this breakpoint). */
-
if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ /* There is a breakpoint at the address we will resume at,
+ step one instruction before inserting breakpoints so that
+ we do not stop right away (and report a second hit at this
+ breakpoint). */
oneproc = 1;
-
-#ifndef STEP_SKIPS_DELAY
-#define STEP_SKIPS_DELAY(pc) (0)
-#define STEP_SKIPS_DELAY_P (0)
-#endif
- /* Check breakpoint_here_p first, because breakpoint_here_p is fast
- (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
- is slow (it needs to read memory from the target). */
- if (STEP_SKIPS_DELAY_P
- && breakpoint_here_p (read_pc () + 4)
- && STEP_SKIPS_DELAY (read_pc ()))
+ else if (gdbarch_single_step_through_delay_p (current_gdbarch)
+ && gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ()))
+ /* We stepped onto an instruction that needs to be stepped
+ again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
write_pc (addr);
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
+ paddr_nz (addr), siggnal, step);
+
/* In a multi-threaded task we may select another thread
and then continue or step.
if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
oneproc = 1;
-#ifdef HP_OS_BUG
- if (trap_expected_after_continue)
- {
- /* If (step == 0), a trap will be automatically generated after
- the first instruction is executed. Force step one
- instruction to clear this condition. This should not occur
- if step is nonzero, but it is harmless in that case. */
- oneproc = 1;
- trap_expected_after_continue = 0;
- }
-#endif /* HP_OS_BUG */
-
if (oneproc)
/* We will get a trace trap after one instruction.
Continue it automatically and insert breakpoints then. */
{
insert_breakpoints ();
/* If we get here there was no call to error() in
- insert breakpoints -- so they were inserted. */
+ insert breakpoints -- so they were inserted. */
breakpoints_inserted = 1;
}
cannot be read unless the inferior is stopped. At that point, we
are not guaranteed the inferior is stopped and so the read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
- updated correctly when the inferior is stopped. */
+ updated correctly when the inferior is stopped. */
prev_pc = read_pc ();
/* Resume inferior. */
and in any case decode why it stopped, and act accordingly. */
/* Do this only if we are not using the event loop, or if the target
does not support asynchronous execution. */
- if (!event_loop_p || !target_can_async_p ())
+ if (!target_can_async_p ())
{
wait_for_inferior ();
normal_stop ();
/* Start remote-debugging of a machine over a serial link. */
void
-start_remote (void)
+start_remote (int from_tty)
{
init_thread_list ();
init_wait_for_inferior ();
is currently running and GDB state should be set to the same as
for an async run. */
wait_for_inferior ();
+
+ /* Now that the inferior has stopped, do any bookkeeping like
+ loading shared libraries. We want to do this before normal_stop,
+ so that the displayed frame is up to date. */
+ post_create_inferior (¤t_target, from_tty);
+
normal_stop ();
}
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 0;
-#endif
breakpoints_inserted = 0;
breakpoint_init_inferior (inf_starting);
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
- /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
- number_of_threads_in_syscalls = 0;
-
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
}
-
-static void
-delete_breakpoint_current_contents (void *arg)
-{
- struct breakpoint **breakpointp = (struct breakpoint **) arg;
- if (*breakpointp != NULL)
- {
- delete_breakpoint (*breakpointp);
- *breakpointp = NULL;
- }
-}
\f
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
{
infwait_normal_state,
infwait_thread_hop_state,
- infwait_nullified_state,
infwait_nonstep_watch_state
};
to the interface from within handle_inferior_event(). */
enum inferior_stop_reason
{
- /* We don't know why. */
- STOP_UNKNOWN,
/* Step, next, nexti, stepi finished. */
END_STEPPING_RANGE,
- /* Found breakpoint. */
- BREAKPOINT_HIT,
/* Inferior terminated by signal. */
SIGNAL_EXITED,
/* Inferior exited. */
CORE_ADDR stop_func_end;
char *stop_func_name;
struct symtab_and_line sal;
- int remove_breakpoints_on_following_step;
int current_line;
struct symtab *current_symtab;
int handling_longjmp; /* FIXME */
ptid_t ptid;
ptid_t saved_inferior_ptid;
- int update_step_sp;
+ int step_after_step_resume_breakpoint;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
- int enable_hw_watchpoints_after_wait;
- int stepping_through_sigtramp;
int new_thread_event;
struct target_waitstatus tmpstatus;
enum infwait_states infwait_state;
void init_execution_control_state (struct execution_control_state *ecs);
-static void handle_step_into_function (struct execution_control_state *ecs);
void handle_inferior_event (struct execution_control_state *ecs);
-static void check_sigtramp2 (struct execution_control_state *ecs);
static void step_into_function (struct execution_control_state *ecs);
-static void step_over_function (struct execution_control_state *ecs);
+static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
+static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
+static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
struct execution_control_state ecss;
struct execution_control_state *ecs;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
+
old_cleanups = make_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* wfi still stays in a loop, so it's OK just to take the address of
a local to get the ecs pointer. */
{
old_cleanups = make_exec_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_exec_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* Fill in with reasonable starting values. */
init_execution_control_state (async_ecs);
void
init_execution_control_state (struct execution_control_state *ecs)
{
- /* ecs->another_trap? */
+ ecs->another_trap = 0;
ecs->random_signal = 0;
- ecs->remove_breakpoints_on_following_step = 0;
+ ecs->step_after_step_resume_breakpoint = 0;
ecs->handling_longjmp = 0; /* FIXME */
- ecs->update_step_sp = 0;
ecs->stepping_through_solib_after_catch = 0;
ecs->stepping_through_solib_catchpoints = NULL;
- ecs->enable_hw_watchpoints_after_wait = 0;
- ecs->stepping_through_sigtramp = 0;
ecs->sal = find_pc_line (prev_pc, 0);
ecs->current_line = ecs->sal.line;
ecs->current_symtab = ecs->sal.symtab;
ecs->wp = &(ecs->ws);
}
-/* Call this function before setting step_resume_breakpoint, as a
- sanity check. There should never be more than one step-resume
- breakpoint per thread, so we should never be setting a new
- step_resume_breakpoint when one is already active. */
-static void
-check_for_old_step_resume_breakpoint (void)
-{
- if (step_resume_breakpoint)
- warning
- ("GDB bug: infrun.c (wait_for_inferior): dropping old step_resume breakpoint");
-}
-
/* Return the cached copy of the last pid/waitstatus returned by
target_wait()/deprecated_target_wait_hook(). The data is actually
cached by handle_inferior_event(), which gets called immediately
*status = target_last_waitstatus;
}
+void
+nullify_last_target_wait_ptid (void)
+{
+ target_last_wait_ptid = minus_one_ptid;
+}
+
/* Switch thread contexts, maintaining "infrun state". */
static void
be lost. This may happen as a result of the target module
mishandling thread creation. */
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
+ target_pid_to_str (inferior_ptid));
+ fprintf_unfiltered (gdb_stdlog, "to %s\n",
+ target_pid_to_str (ecs->ptid));
+ }
+
if (in_thread_list (inferior_ptid) && in_thread_list (ecs->ptid))
{ /* Perform infrun state context switch: */
/* Save infrun state for the old thread. */
save_infrun_state (inferior_ptid, prev_pc,
trap_expected, step_resume_breakpoint,
- through_sigtramp_breakpoint, step_range_start,
+ step_range_start,
step_range_end, &step_frame_id,
ecs->handling_longjmp, ecs->another_trap,
ecs->stepping_through_solib_after_catch,
ecs->stepping_through_solib_catchpoints,
- ecs->stepping_through_sigtramp,
- ecs->current_line, ecs->current_symtab, step_sp);
+ ecs->current_line, ecs->current_symtab);
/* Load infrun state for the new thread. */
load_infrun_state (ecs->ptid, &prev_pc,
&trap_expected, &step_resume_breakpoint,
- &through_sigtramp_breakpoint, &step_range_start,
+ &step_range_start,
&step_range_end, &step_frame_id,
&ecs->handling_longjmp, &ecs->another_trap,
&ecs->stepping_through_solib_after_catch,
&ecs->stepping_through_solib_catchpoints,
- &ecs->stepping_through_sigtramp,
- &ecs->current_line, &ecs->current_symtab, &step_sp);
+ &ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
-}
-
-/* Handle the inferior event in the cases when we just stepped
- into a function. */
-
-static void
-handle_step_into_function (struct execution_control_state *ecs)
-{
- CORE_ADDR real_stop_pc;
-
- if ((step_over_calls == STEP_OVER_NONE)
- || ((step_range_end == 1)
- && in_prologue (prev_pc, ecs->stop_func_start)))
- {
- /* I presume that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly language level
- ("stepi"). Just stop. */
- /* Also, maybe we just did a "nexti" inside a prolog,
- so we thought it was a subroutine call but it was not.
- Stop as well. FENN */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
- {
- /* We're doing a "next". */
- step_over_function (ecs);
- keep_going (ecs);
- return;
- }
-
- /* If we are in a function call trampoline (a stub between
- the calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to
- the end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
- if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
- if (real_stop_pc != 0)
- ecs->stop_func_start = real_stop_pc;
-
- /* If we have line number information for the function we
- are thinking of stepping into, step into it.
-
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
- {
- struct symtab_and_line tmp_sal;
-
- tmp_sal = find_pc_line (ecs->stop_func_start, 0);
- if (tmp_sal.line != 0)
- {
- step_into_function (ecs);
- return;
- }
- }
-
- /* If we have no line number and the step-stop-if-no-debug
- is set, we stop the step so that the user has a chance to
- switch in assembly mode. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
- {
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- step_over_function (ecs);
- keep_going (ecs);
- return;
+ reinit_frame_cache ();
}
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
- CORE_ADDR stop_pc;
+ CORE_ADDR breakpoint_pc;
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
- if (DECR_PC_AFTER_BREAK == 0)
+ if (gdbarch_decr_pc_after_break (current_gdbarch) == 0)
return;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
- affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
- by software breakpoints should be handled through the normal breakpoint
- layer.
-
+ affected by gdbarch_decr_pc_after_break. Other waitkinds which are
+ implemented by software breakpoints should be handled through the normal
+ breakpoint layer.
+
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
- DECR_PC_AFTER_BREAK. I don't know any specific target that generates
- these signals at breakpoints (the code has been in GDB since at least
- 1992) so I can not guess how to handle them here.
-
- In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
- would have the PC after hitting a watchpoint affected by
- DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
- in GDB history, and it seems unlikely to be correct, so
- HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
+ gdbarch_decr_pc_after_break. I don't know any specific target that
+ generates these signals at breakpoints (the code has been in GDB since at
+ least 1992) so I can not guess how to handle them here.
+
+ In earlier versions of GDB, a target with
+ gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
+ watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
+ target with both of these set in GDB history, and it seems unlikely to be
+ correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
- /* Find the location where (if we've hit a breakpoint) the breakpoint would
- be. */
- stop_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
-
- /* If we're software-single-stepping, then assume this is a breakpoint.
- NOTE drow/2004-01-17: This doesn't check that the PC matches, or that
- we're even in the right thread. The software-single-step code needs
- some modernization.
-
- If we're not software-single-stepping, then we first check that there
- is an enabled software breakpoint at this address. If there is, and
- we weren't using hardware-single-step, then we've hit the breakpoint.
-
- If we were using hardware-single-step, we check prev_pc; if we just
- stepped over an inserted software breakpoint, then we should decrement
- the PC and eventually report hitting the breakpoint. The prev_pc check
- prevents us from decrementing the PC if we just stepped over a jump
- instruction and landed on the instruction after a breakpoint.
-
- The last bit checks that we didn't hit a breakpoint in a signal handler
- without an intervening stop in sigtramp, which is detected by a new
- stack pointer value below any usual function calling stack adjustments.
-
- NOTE drow/2004-01-17: I'm not sure that this is necessary. The check
- predates checking for software single step at the same time. Also,
- if we've moved into a signal handler we should have seen the
- signal. */
-
- if ((SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- || (software_breakpoint_inserted_here_p (stop_pc)
- && !(currently_stepping (ecs)
- && prev_pc != stop_pc
- && !(step_range_end && INNER_THAN (read_sp (), (step_sp - 16))))))
- write_pc_pid (stop_pc, ecs->ptid);
+ /* Find the location where (if we've hit a breakpoint) the
+ breakpoint would be. */
+ breakpoint_pc = read_pc_pid (ecs->ptid) - gdbarch_decr_pc_after_break
+ (current_gdbarch);
+
+ if (SOFTWARE_SINGLE_STEP_P ())
+ {
+ /* When using software single-step, a SIGTRAP can only indicate
+ an inserted breakpoint. This actually makes things
+ easier. */
+ if (singlestep_breakpoints_inserted_p)
+ /* When software single stepping, the instruction at [prev_pc]
+ is never a breakpoint, but the instruction following
+ [prev_pc] (in program execution order) always is. Assume
+ that following instruction was reached and hence a software
+ breakpoint was hit. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ else if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no single-step
+ breakpoints inserted) and it hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ /* When using hardware single-step, a SIGTRAP is reported for
+ both a completed single-step and a software breakpoint. Need
+ to differentiate between the two as the latter needs
+ adjusting but the former does not.
+
+ When the thread to be examined does not match the current thread
+ context we can't use currently_stepping, so assume no
+ single-stepping in this case. */
+ if (ptid_equal (ecs->ptid, inferior_ptid) && currently_stepping (ecs))
+ {
+ if (prev_pc == breakpoint_pc
+ && software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* Hardware single-stepped a software breakpoint (as
+ occures when the inferior is resumed with PC pointing
+ at not-yet-hit software breakpoint). Since the
+ breakpoint really is executed, the inferior needs to be
+ backed up to the breakpoint address. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no hardware
+ single-step and no possibility of a false SIGTRAP) and
+ hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ }
}
/* Given an execution control state that has been freshly filled in
void
handle_inferior_event (struct execution_control_state *ecs)
{
- /* NOTE: cagney/2003-03-28: If you're looking at this code and
- thinking that the variable stepped_after_stopped_by_watchpoint
- isn't used, then you're wrong! The macro STOPPED_BY_WATCHPOINT,
- defined in the file "config/pa/nm-hppah.h", accesses the variable
- indirectly. Mutter something rude about the HP merge. */
+ /* NOTE: bje/2005-05-02: If you're looking at this code and thinking
+ that the variable stepped_after_stopped_by_watchpoint isn't used,
+ then you're wrong! See remote.c:remote_stopped_data_address. */
+
int sw_single_step_trap_p = 0;
+ int stopped_by_watchpoint = -1; /* Mark as unknown. */
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
switch (ecs->infwait_state)
{
case infwait_thread_hop_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
ecs->waiton_ptid = pid_to_ptid (-1);
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_normal_state:
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
- break;
-
- case infwait_nullified_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_nonstep_watch_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: infwait_nonstep_watch_state\n");
insert_breakpoints ();
/* FIXME-maybe: is this cleaner than setting a flag? Does it
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
ecs->infwait_state = infwait_normal_state;
- flush_cached_frames ();
+ reinit_frame_cache ();
/* If it's a new process, add it to the thread database */
ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
+ && !ptid_equal (ecs->ptid, minus_one_ptid)
&& !in_thread_list (ecs->ptid));
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
ui_out_text (uiout, "[New ");
ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
ui_out_text (uiout, "]\n");
-
-#if 0
- /* NOTE: This block is ONLY meant to be invoked in case of a
- "thread creation event"! If it is invoked for any other
- sort of event (such as a new thread landing on a breakpoint),
- the event will be discarded, which is almost certainly
- a bad thing!
-
- To avoid this, the low-level module (eg. target_wait)
- should call in_thread_list and add_thread, so that the
- new thread is known by the time we get here. */
-
- /* We may want to consider not doing a resume here in order
- to give the user a chance to play with the new thread.
- It might be good to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens
- automatically in either the OS or the native code).
- Therefore we need to continue all threads in order to
- make progress. */
-
- target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
-#endif
}
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
/* Ignore gracefully during startup of the inferior, as it
might be the shell which has just loaded some objects,
otherwise add the symbols for the newly loaded objects. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
return;
case TARGET_WAITKIND_SPURIOUS:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
(LONGEST) ecs->ws.value.integer));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_print_frame = 0;
stop_stepping (ecs);
return;
case TARGET_WAITKIND_SIGNALLED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
stop_print_frame = 0;
stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
target_mourn_inferior ();
print_stop_reason (SIGNAL_EXITED, stop_signal);
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_stepping (ecs);
return;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
stop_pc = read_pc ();
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
stop_signal = TARGET_SIGNAL_TRAP;
/* NOTE drow/2002-12-05: This code should be pushed down into the
- target_wait function. Until then following vfork on HP/UX 10.20
- is probably broken by this. Of course, it's broken anyway. */
+ target_wait function. Until then following vfork on HP/UX 10.20
+ is probably broken by this. Of course, it's broken anyway. */
/* Is this a target which reports multiple exec events per actual
call to exec()? (HP-UX using ptrace does, for example.) If so,
ignore all but the last one. Just resume the exec'r, and wait
if (inferior_ignoring_leading_exec_events)
{
inferior_ignoring_leading_exec_events--;
- if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
- ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.
- parent_pid);
target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
ecs->saved_inferior_ptid = inferior_ptid;
inferior_ptid = ecs->ptid;
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
}
goto process_event_stop_test;
- /* These syscall events are returned on HP-UX, as part of its
- implementation of page-protection-based "hardware" watchpoints.
- HP-UX has unfortunate interactions between page-protections and
- some system calls. Our solution is to disable hardware watches
- when a system call is entered, and reenable them when the syscall
- completes. The downside of this is that we may miss the precise
- point at which a watched piece of memory is modified. "Oh well."
-
- Note that we may have multiple threads running, which may each
- enter syscalls at roughly the same time. Since we don't have a
- good notion currently of whether a watched piece of memory is
- thread-private, we'd best not have any page-protections active
- when any thread is in a syscall. Thus, we only want to reenable
- hardware watches when no threads are in a syscall.
-
- Also, be careful not to try to gather much state about a thread
- that's in a syscall. It's frequently a losing proposition. */
+ /* Be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
- number_of_threads_in_syscalls++;
- if (number_of_threads_in_syscalls == 1)
- {
- TARGET_DISABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
get it entirely out of the syscall. (We get notice of the
event when the thread is just on the verge of exiting a
syscall. Stepping one instruction seems to get it back
- into user code.)
-
- Note that although the logical place to reenable h/w watches
- is here, we cannot. We cannot reenable them before stepping
- the thread (this causes the next wait on the thread to hang).
-
- Nor can we enable them after stepping until we've done a wait.
- Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait
- here, which will be serviced immediately after the target
- is waited on. */
+ into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- if (number_of_threads_in_syscalls > 0)
- {
- number_of_threads_in_syscalls--;
- ecs->enable_hw_watchpoints_after_wait =
- (number_of_threads_in_syscalls == 0);
- }
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_STOPPED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
stop_signal = ecs->ws.value.sig;
break;
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
done what needs to be done, if anything.
-
- One of the possible circumstances for this is when the
- inferior produces output for the console. The inferior has
- not stopped, and we are ignoring the event. Another possible
- circumstance is any event which the lower level knows will be
- reported multiple times without an intervening resume. */
+
+ One of the possible circumstances for this is when the
+ inferior produces output for the console. The inferior has
+ not stopped, and we are ignoring the event. Another possible
+ circumstance is any event which the lower level knows will be
+ reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
prepare_to_wait (ecs);
return;
}
stop_pc = read_pc_pid (ecs->ptid);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+
if (stepping_past_singlestep_breakpoint)
{
- gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p);
+ gdb_assert (SOFTWARE_SINGLE_STEP_P ()
+ && singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
stepping_past_singlestep_breakpoint = 0;
/* We've either finished single-stepping past the single-step
- breakpoint, or stopped for some other reason. It would be nice if
- we could tell, but we can't reliably. */
+ breakpoint, or stopped for some other reason. It would be nice if
+ we could tell, but we can't reliably. */
if (stop_signal == TARGET_SIGNAL_TRAP)
- {
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
+ /* We have not context switched yet, so this should be true
+ no matter which thread hit the singlestep breakpoint. */
+ gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid));
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: software single step "
+ "trap for %s\n",
+ target_pid_to_str (ecs->ptid));
+
ecs->random_signal = 0;
/* The call to in_thread_list is necessary because PTIDs sometimes
change when we go from single-threaded to multi-threaded. If
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
- thread_hop_needed = 1;
- stepping_past_singlestep_breakpoint = 1;
- saved_singlestep_ptid = singlestep_ptid;
+ /* If the PC of the thread we were trying to single-step
+ has changed, discard this event (which we were going
+ to ignore anyway), and pretend we saw that thread
+ trap. This prevents us continuously moving the
+ single-step breakpoint forward, one instruction at a
+ time. If the PC has changed, then the thread we were
+ trying to single-step has trapped or been signalled,
+ but the event has not been reported to GDB yet.
+
+ There might be some cases where this loses signal
+ information, if a signal has arrived at exactly the
+ same time that the PC changed, but this is the best
+ we can do with the information available. Perhaps we
+ should arrange to report all events for all threads
+ when they stop, or to re-poll the remote looking for
+ this particular thread (i.e. temporarily enable
+ schedlock). */
+ if (read_pc_pid (singlestep_ptid) != singlestep_pc)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
+ " but expected thread advanced also\n");
+
+ /* The current context still belongs to
+ singlestep_ptid. Don't swap here, since that's
+ the context we want to use. Just fudge our
+ state and continue. */
+ ecs->ptid = singlestep_ptid;
+ stop_pc = read_pc_pid (ecs->ptid);
+ }
+ else
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: unexpected thread\n");
+
+ thread_hop_needed = 1;
+ stepping_past_singlestep_breakpoint = 1;
+ saved_singlestep_ptid = singlestep_ptid;
+ }
}
}
if (thread_hop_needed)
- {
- int remove_status;
+ {
+ int remove_status;
- /* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- /* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
- singlestep_breakpoints_inserted_p = 0;
- }
+ /* Saw a breakpoint, but it was hit by the wrong thread.
+ Just continue. */
- remove_status = remove_breakpoints ();
- /* Did we fail to remove breakpoints? If so, try
- to set the PC past the bp. (There's at least
- one situation in which we can fail to remove
- the bp's: On HP-UX's that use ttrace, we can't
- change the address space of a vforking child
- process until the child exits (well, okay, not
- then either :-) or execs. */
- if (remove_status != 0)
- {
- /* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc + 4, ecs->ptid);
- /* We need to restart all the threads now,
- * unles we're running in scheduler-locked mode.
- * Use currently_stepping to determine whether to
- * step or continue.
- */
- /* FIXME MVS: is there any reason not to call resume()? */
- if (scheduler_mode == schedlock_on)
- target_resume (ecs->ptid,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- else
- target_resume (RESUME_ALL,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ remove_single_step_breakpoints ();
+ singlestep_breakpoints_inserted_p = 0;
+ }
+
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try
+ to set the PC past the bp. (There's at least
+ one situation in which we can fail to remove
+ the bp's: On HP-UX's that use ttrace, we can't
+ change the address space of a vforking child
+ process until the child exits (well, okay, not
+ then either :-) or execs. */
+ if (remove_status != 0)
+ {
+ /* FIXME! This is obviously non-portable! */
+ write_pc_pid (stop_pc + 4, ecs->ptid);
+ /* We need to restart all the threads now,
+ * unles we're running in scheduler-locked mode.
+ * Use currently_stepping to determine whether to
+ * step or continue.
+ */
+ /* FIXME MVS: is there any reason not to call resume()? */
+ if (scheduler_mode == schedlock_on)
+ target_resume (ecs->ptid,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
else
- { /* Single step */
- breakpoints_inserted = 0;
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs);
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->another_trap = 1;
-
- ecs->infwait_state = infwait_thread_hop_state;
- keep_going (ecs);
- registers_changed ();
- return;
- }
+ target_resume (RESUME_ALL,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+ else
+ { /* Single step */
+ breakpoints_inserted = 0;
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs);
+ ecs->waiton_ptid = ecs->ptid;
+ ecs->wp = &(ecs->ws);
+ ecs->another_trap = 1;
+
+ ecs->infwait_state = infwait_thread_hop_state;
+ keep_going (ecs);
+ registers_changed ();
+ return;
+ }
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- sw_single_step_trap_p = 1;
- ecs->random_signal = 0;
- }
+ {
+ sw_single_step_trap_p = 1;
+ ecs->random_signal = 0;
+ }
}
else
ecs->random_signal = 1;
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
+
context_switch (ecs);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
-
- flush_cached_frames ();
}
if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
- /* If PC is pointing at a nullified instruction, then step beyond
- it so that the user won't be confused when GDB appears to be ready
- to execute it. */
-
- /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */
- if (INSTRUCTION_NULLIFIED)
- {
- registers_changed ();
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- /* We may have received a signal that we want to pass to
- the inferior; therefore, we must not clobber the waitstatus
- in WS. */
-
- ecs->infwait_state = infwait_nullified_state;
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->tmpstatus);
- prepare_to_wait (ecs);
- return;
- }
-
/* It may not be necessary to disable the watchpoint to stop over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint. */
if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
resume (1, 0);
prepare_to_wait (ecs);
return;
/* It is far more common to need to disable a watchpoint to step
the inferior over it. FIXME. What else might a debug
register or page protection watchpoint scheme need here? */
- if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
+ if (gdbarch_have_nonsteppable_watchpoint (current_gdbarch)
+ && STOPPED_BY_WATCHPOINT (ecs->ws))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
includes evaluating watchpoints, things will come to a
stop in the correct manner. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
/* It may be possible to simply continue after a watchpoint. */
if (HAVE_CONTINUABLE_WATCHPOINT)
- STOPPED_BY_WATCHPOINT (ecs->ws);
+ stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (ecs->ws);
ecs->stop_func_start = 0;
ecs->stop_func_end = 0;
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
- ecs->stop_func_start += FUNCTION_START_OFFSET;
+ ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
ecs->another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
- breakpoints_failed = 0;
+
+ if (stop_signal == TARGET_SIGNAL_TRAP
+ && trap_expected
+ && gdbarch_single_step_through_delay_p (current_gdbarch)
+ && currently_stepping (ecs))
+ {
+ /* We're trying to step of a breakpoint. Turns out that we're
+ also on an instruction that needs to be stepped multiple
+ times before it's been fully executing. E.g., architectures
+ with a delay slot. It needs to be stepped twice, once for
+ the instruction and once for the delay slot. */
+ int step_through_delay
+ = gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ());
+ if (debug_infrun && step_through_delay)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
+ if (step_range_end == 0 && step_through_delay)
+ {
+ /* The user issued a continue when stopped at a breakpoint.
+ Set up for another trap and get out of here. */
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
+ else if (step_through_delay)
+ {
+ /* The user issued a step when stopped at a breakpoint.
+ Maybe we should stop, maybe we should not - the delay
+ slot *might* correspond to a line of source. In any
+ case, don't decide that here, just set ecs->another_trap,
+ making sure we single-step again before breakpoints are
+ re-inserted. */
+ ecs->another_trap = 1;
+ }
+ }
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
stack. */
if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoints_inserted &&
- (stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_SEGV
- || stop_signal == TARGET_SIGNAL_EMT))
- || stop_soon == STOP_QUIETLY
- || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ || (breakpoints_inserted
+ && (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_SEGV
+ || stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
stop_stepping (ecs);
return;
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
return;
}
- /* Don't even think about breakpoints
- if just proceeded over a breakpoint.
-
- However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then through_sigtramp_breakpoint
- will be set and we should check whether we've hit the
- step breakpoint. */
- if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
- && through_sigtramp_breakpoint == NULL)
- bpstat_clear (&stop_bpstat);
+ /* Don't even think about breakpoints if just proceeded over a
+ breakpoint. */
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
+ bpstat_clear (&stop_bpstat);
+ }
else
{
/* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
+ stopped_by_watchpoint);
/* Following in case break condition called a
function. */
}
/* NOTE: cagney/2003-03-29: These two checks for a random signal
- at one stage in the past included checks for an inferior
- function call's call dummy's return breakpoint. The original
- comment, that went with the test, read:
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
- ``End of a stack dummy. Some systems (e.g. Sony news) give
- another signal besides SIGTRAP, so check here as well as
- above.''
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
If someone ever tries to get get call dummys on a
non-executable stack to work (where the target would stop
enabled when momentary breakpoints were not being used, I
suspect that it won't be the case.
- NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
- be necessary for call dummies on a non-executable stack on
- SPARC. */
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
/* Signal not for debugging purposes. */
int printed = 0;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
+
stopped_by_random_signal = 1;
if (signal_print[stop_signal])
if (signal_program[stop_signal] == 0)
stop_signal = TARGET_SIGNAL_0;
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going.
-
- This used to jump to step_over_function if we are stepping,
- which is wrong.
-
- Suppose the user does a `next' over a function call, and while
- that call is in progress, the inferior receives a signal for
- which GDB does not stop (i.e., signal_stop[SIG] is false). In
- that case, when we reach this point, there is already a
- step-resume breakpoint established, right where it should be:
- immediately after the function call the user is "next"-ing
- over. If we call step_over_function now, two bad things
- happen:
-
- - we'll create a new breakpoint, at wherever the current
- frame's return address happens to be. That could be
- anywhere, depending on what function call happens to be on
- the top of the stack at that point. Point is, it's probably
- not where we need it.
-
- - the existing step-resume breakpoint (which is at the correct
- address) will get orphaned: step_resume_breakpoint will point
- to the new breakpoint, and the old step-resume breakpoint
- will never be cleaned up.
-
- The old behavior was meant to help HP-UX single-step out of
- sigtramps. It would place the new breakpoint at prev_pc, which
- was certainly wrong. I don't know the details there, so fixing
- this probably breaks that. As with anything else, it's up to
- the HP-UX maintainer to furnish a fix that doesn't break other
- platforms. --JimB, 20 May 1999 */
- check_sigtramp2 (ecs);
+ if (prev_pc == read_pc ()
+ && !breakpoints_inserted
+ && breakpoint_here_p (read_pc ())
+ && step_resume_breakpoint == NULL)
+ {
+ /* We were just starting a new sequence, attempting to
+ single-step off of a breakpoint and expecting a SIGTRAP.
+ Intead this signal arrives. This signal will take us out
+ of the stepping range so GDB needs to remember to, when
+ the signal handler returns, resume stepping off that
+ breakpoint. */
+ /* To simplify things, "continue" is forced to use the same
+ code paths as single-step - set a breakpoint at the
+ signal return address and then, once hit, step off that
+ breakpoint. */
+
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ ecs->step_after_step_resume_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+
+ if (step_range_end != 0
+ && stop_signal != TARGET_SIGNAL_0
+ && stop_pc >= step_range_start && stop_pc < step_range_end
+ && frame_id_eq (get_frame_id (get_current_frame ()),
+ step_frame_id)
+ && step_resume_breakpoint == NULL)
+ {
+ /* The inferior is about to take a signal that will take it
+ out of the single step range. Set a breakpoint at the
+ current PC (which is presumably where the signal handler
+ will eventually return) and then allow the inferior to
+ run free.
+
+ Note that this is only needed for a signal delivered
+ while in the single-step range. Nested signals aren't a
+ problem as they eventually all return. */
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ keep_going (ecs);
+ return;
+ }
+
+ /* Note: step_resume_breakpoint may be non-NULL. This occures
+ when either there's a nested signal, or when there's a
+ pending signal enabled just as the signal handler returns
+ (leaving the inferior at the step-resume-breakpoint without
+ actually executing it). Either way continue until the
+ breakpoint is really hit. */
keep_going (ecs);
return;
}
if (what.call_dummy)
{
stop_stack_dummy = 1;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 1;
-#endif
}
switch (what.main_action)
/* If we hit the breakpoint at longjmp, disable it for the
duration of this command. Then, install a temporary
breakpoint at the target of the jmp_buf. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
disable_longjmp_breakpoint ();
remove_breakpoints ();
breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET_P () || !GET_LONGJMP_TARGET (&jmp_buf_pc))
+ if (!gdbarch_get_longjmp_target_p (current_gdbarch)
+ || !gdbarch_get_longjmp_target (current_gdbarch,
+ get_current_frame (), &jmp_buf_pc))
{
keep_going (ecs);
return;
{
delete_step_resume_breakpoint (&step_resume_breakpoint);
}
- /* Not sure whether we need to blow this away too, but probably
- it is like the step-resume breakpoint. */
- if (through_sigtramp_breakpoint != NULL)
- {
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
- }
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ());
- else
-#endif /* 0 */
- set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
+ set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
remove_breakpoints ();
breakpoints_inserted = 0;
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (frame_id_inner (get_frame_id (get_current_frame ()),
- step_frame_id)))
- {
- ecs->another_trap = 1;
- keep_going (ecs);
- return;
- }
-#endif /* 0 */
disable_longjmp_breakpoint ();
ecs->handling_longjmp = 0; /* FIXME */
if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
/* else fallthrough */
case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
if (breakpoints_inserted)
- {
- remove_breakpoints ();
- }
+ remove_breakpoints ();
breakpoints_inserted = 0;
ecs->another_trap = 1;
/* Still need to check other stuff, at least the case
break;
case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
step-resume bp, but it makes no effort to ensure that
the one deleted is the one currently stopped at. MVS */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
+
if (step_resume_breakpoint == NULL)
{
step_resume_breakpoint =
bpstat_find_step_resume_breakpoint (stop_bpstat);
}
delete_step_resume_breakpoint (&step_resume_breakpoint);
- break;
-
- case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- if (through_sigtramp_breakpoint)
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
-
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
- ecs->another_trap = 1;
+ if (ecs->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back
+ to doing that. */
+ ecs->step_after_step_resume_breakpoint = 0;
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
break;
case BPSTAT_WHAT_CHECK_SHLIBS:
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
-#ifdef SOLIB_ADD
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
/* Remove breakpoints, we eventually want to step over the
shlib event breakpoint, and SOLIB_ADD might adjust
breakpoint addresses via breakpoint_re_set. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
+#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
+#else
+ solib_add (NULL, 0, ¤t_target, auto_solib_add);
+#endif
target_terminal_inferior ();
/* Try to reenable shared library breakpoints, additional
the call that caused this catchpoint to trigger. That
gives the user a more useful vantage from which to
examine their program's state. */
- else if (what.main_action ==
- BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ else if (what.main_action
+ == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
{
/* ??rehrauer: If I could figure out how to get the
right return PC from here, we could just set a temp
break;
}
}
-#endif
break;
case BPSTAT_WHAT_LAST:
test for stepping. But, if not stepping,
do not stop. */
- /* Are we stepping to get the inferior out of the dynamic
- linker's hook (and possibly the dld itself) after catching
- a shlib event? */
+ /* Are we stepping to get the inferior out of the dynamic linker's
+ hook (and possibly the dld itself) after catching a shlib
+ event? */
if (ecs->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
ecs->another_trap = 1;
keep_going (ecs);
return;
}
#endif
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
ecs->stepping_through_solib_after_catch = 0;
if (step_resume_breakpoint)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: step-resume breakpoint is inserted\n");
+
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
if (step_range_end == 0)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
/* Likewise if we aren't even stepping. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
within it! */
if (stop_pc >= step_range_start && stop_pc < step_range_end)
{
- /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
- So definately need to check for sigtramp here. */
- check_sigtramp2 (ecs);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
+ paddr_nz (step_range_start),
+ paddr_nz (step_range_end));
keep_going (ecs);
return;
}
until we exit the run time loader code and reach the callee's
address. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE
- && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
+#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
+ && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)
+#else
+ && in_solib_dynsym_resolve_code (stop_pc)
+#endif
+ )
{
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
+
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
init_sal (&sr_sal);
sr_sal.pc = pc_after_resolver;
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
keep_going (ecs);
return;
}
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE
- && ecs->stop_func_name == NULL)
+ if (step_range_end != 1
+ && (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ || step_over_calls == STEP_OVER_ALL)
+ && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
- /* There is no symbol, not even a minimal symbol, corresponding
- to the address where we just stopped. So we just stepped
- inside undebuggable code. Since we want to step over this
- kind of code, we keep going until the inferior returns from
- the current function. */
- handle_step_into_function (ecs);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
+ /* The inferior, while doing a "step" or "next", has ended up in
+ a signal trampoline (either by a signal being delivered or by
+ the signal handler returning). Just single-step until the
+ inferior leaves the trampoline (either by calling the handler
+ or returning). */
+ keep_going (ecs);
return;
}
- /* We can't update step_sp every time through the loop, because
- reading the stack pointer would slow down stepping too much.
- But we can update it every time we leave the step range. */
- ecs->update_step_sp = 1;
+ /* Check for subroutine calls. The check for the current frame
+ equalling the step ID is not necessary - the check of the
+ previous frame's ID is sufficient - but it is a common case and
+ cheaper than checking the previous frame's ID.
- /* Did we just step into a singal trampoline (either by stepping out
- of a handler, or by taking a signal)? */
- if (get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME
- && !frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id))
+ NOTE: frame_id_eq will never report two invalid frame IDs as
+ being equal, so to get into this block, both the current and
+ previous frame must have valid frame IDs. */
+ if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)
+ && frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
{
- {
- struct frame_id current_frame = get_frame_id (get_current_frame ());
+ CORE_ADDR real_stop_pc;
- if (frame_id_inner (current_frame, step_frame_id))
- {
- /* We have just taken a signal; go until we are back to
- the point where we took it and one more. */
-
- /* This code is needed at least in the following case:
- The user types "next" and then a signal arrives (before
- the "next" is done). */
-
- /* Note that if we are stopped at a breakpoint, then we need
- the step_resume breakpoint to override any breakpoints at
- the same location, so that we will still step over the
- breakpoint even though the signal happened. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
- sr_sal.symtab = NULL;
- sr_sal.line = 0;
- sr_sal.pc = prev_pc;
- /* We could probably be setting the frame to
- step_frame_id; I don't think anyone thought to try it. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
- }
- else
- {
- /* We just stepped out of a signal handler and into
- its calling trampoline.
-
- Normally, we'd call step_over_function from
- here, but for some reason GDB can't unwind the
- stack correctly to find the real PC for the point
- user code where the signal trampoline will return
- -- FRAME_SAVED_PC fails, at least on HP-UX 10.20.
- But signal trampolines are pretty small stubs of
- code, anyway, so it's OK instead to just
- single-step out. Note: assuming such trampolines
- don't exhibit recursion on any platform... */
- find_pc_partial_function (stop_pc, &ecs->stop_func_name,
- &ecs->stop_func_start,
- &ecs->stop_func_end);
- /* Readjust stepping range */
- step_range_start = ecs->stop_func_start;
- step_range_end = ecs->stop_func_end;
- ecs->stepping_through_sigtramp = 1;
- }
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
+ if ((step_over_calls == STEP_OVER_NONE)
+ || ((step_range_end == 1)
+ && in_prologue (prev_pc, ecs->stop_func_start)))
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ /* Also, maybe we just did a "nexti" inside a prolog, so we
+ thought it was a subroutine call but it was not. Stop as
+ well. FENN */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
- /* If this is stepi or nexti, make sure that the stepping range
- gets us past that instruction. */
- if (step_range_end == 1)
- /* FIXME: Does this run afoul of the code below which, if
- we step into the middle of a line, resets the stepping
- range? */
- step_range_end = (step_range_start = prev_pc) + 1;
+ if (step_over_calls == STEP_OVER_ALL)
+ {
+ /* We're doing a "next", set a breakpoint at callee's return
+ address (the address at which the caller will
+ resume). */
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ keep_going (ecs);
+ return;
+ }
- ecs->remove_breakpoints_on_following_step = 1;
- keep_going (ecs);
- return;
- }
+ /* If we are in a function call trampoline (a stub between the
+ calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to the
+ end of, if we do step into it. */
+ real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
+ if (real_stop_pc == 0)
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
+ if (real_stop_pc != 0)
+ ecs->stop_func_start = real_stop_pc;
+
+ if (
+#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
+ IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start)
+#else
+ in_solib_dynsym_resolve_code (ecs->stop_func_start)
+#endif
+)
+ {
+ struct symtab_and_line sr_sal;
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
- if (frame_id_eq (get_frame_id (get_prev_frame (get_current_frame ())),
- step_frame_id))
- {
- /* It's a subroutine call. */
- handle_step_into_function (ecs);
- return;
- }
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
+ keep_going (ecs);
+ return;
+ }
- /* We've wandered out of the step range. */
+ /* If we have line number information for the function we are
+ thinking of stepping into, step into it.
- ecs->sal = find_pc_line (stop_pc, 0);
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
- if (step_range_end == 1)
- {
- /* It is stepi or nexti. We always want to stop stepping after
- one instruction. */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
+ tmp_sal = find_pc_line (ecs->stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ {
+ step_into_function (ecs);
+ return;
+ }
+ }
+
+ /* If we have no line number and the step-stop-if-no-debug is
+ set, we stop the step so that the user has a chance to switch
+ in assembly mode. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+ {
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ /* Set a breakpoint at callee's return address (the address at
+ which the caller will resume). */
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ keep_going (ecs);
return;
}
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
- if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
+ if (gdbarch_in_solib_return_trampoline (current_gdbarch,
+ stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
- CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ CORE_ADDR real_stop_pc;
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+
+ /* Do not specify what the fp should be when we stop since
+ on some machines the prologue is where the new fp value
+ is established. */
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* Restart without fiddling with the step ranges or
other state. */
}
}
+ ecs->sal = find_pc_line (stop_pc, 0);
+
+ /* NOTE: tausq/2004-05-24: This if block used to be done before all
+ the trampoline processing logic, however, there are some trampolines
+ that have no names, so we should do trampoline handling first. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && ecs->stop_func_name == NULL
+ && ecs->sal.line == 0)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
+
+ /* The inferior just stepped into, or returned to, an
+ undebuggable function (where there is no debugging information
+ and no line number corresponding to the address where the
+ inferior stopped). Since we want to skip this kind of code,
+ we keep going until the inferior returns from this
+ function - unless the user has asked us not to (via
+ set step-mode) or we no longer know how to get back
+ to the call site. */
+ if (step_stop_if_no_debug
+ || !frame_id_p (frame_unwind_id (get_current_frame ())))
+ {
+ /* If we have no line number and the step-stop-if-no-debug
+ is set, we stop the step so that the user has a chance to
+ switch in assembly mode. */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+ else
+ {
+ /* Set a breakpoint at callee's return address (the address
+ at which the caller will resume). */
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ if (step_range_end == 1)
+ {
+ /* It is stepi or nexti. We always want to stop stepping after
+ one instruction. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
if (ecs->sal.line == 0)
{
/* We have no line number information. That means to stop
stepping (does this always happen right after one instruction,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
we don't stop if we step into the middle of a different line.
That is said to make things like for (;;) statements work
better. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
This is particularly necessary for a one-line function,
in which after skipping the prologue we better stop even though
we will be in mid-line. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
stackless leaf function. I think the logic should instead look
at the unwound frame ID has that should give a more robust
indication of what happened. */
- if (step-ID == current-ID)
- still stepping in same function;
- else if (step-ID == unwind (current-ID))
- stepped into a function;
- else
- stepped out of a function;
- /* Of course this assumes that the frame ID unwind code is robust
- and we're willing to introduce frame unwind logic into this
- function. Fortunately, those days are nearly upon us. */
+ if (step - ID == current - ID)
+ still stepping in same function;
+ else if (step - ID == unwind (current - ID))
+ stepped into a function;
+ else
+ stepped out of a function;
+ /* Of course this assumes that the frame ID unwind code is robust
+ and we're willing to introduce frame unwind logic into this
+ function. Fortunately, those days are nearly upon us. */
#endif
{
struct frame_id current_frame = get_frame_id (get_current_frame ());
step_frame_id = current_frame;
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
keep_going (ecs);
}
static int
currently_stepping (struct execution_control_state *ecs)
{
- return ((through_sigtramp_breakpoint == NULL
- && !ecs->handling_longjmp
+ return ((!ecs->handling_longjmp
&& ((step_range_end && step_resume_breakpoint == NULL)
|| trap_expected))
|| ecs->stepping_through_solib_after_catch
|| bpstat_should_step ());
}
-static void
-check_sigtramp2 (struct execution_control_state *ecs)
-{
- char *name;
- struct symtab_and_line sr_sal;
-
- /* Check that what has happened here is that we have just stepped
- the inferior with a signal (because it is a signal which
- shouldn't make us stop), thus stepping into sigtramp. */
-
- if (!trap_expected)
- return;
- if (get_frame_type (get_current_frame ()) != SIGTRAMP_FRAME)
- return;
-
- /* So we need to set a step_resume_break_address breakpoint and
- continue until we hit it, and then step. FIXME: This should be
- more enduring than a step_resume breakpoint; we should know that
- we will later need to keep going rather than re-hitting the
- breakpoint here (see the testsuite, gdb.base/signals.exp where it
- says "exceedingly difficult"). */
-
- init_sal (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = prev_pc;
- sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* We perhaps could set the frame if we kept track of what the frame
- corresponding to prev_pc was. But we don't, so don't. */
- through_sigtramp_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_through_sigtramp);
- if (breakpoints_inserted)
- insert_breakpoints ();
-
- ecs->remove_breakpoints_on_following_step = 1;
- ecs->another_trap = 1;
-}
-
/* Subroutine call with source code we should not step over. Do step
to the first line of code in it. */
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start);
+ ecs->stop_func_start = gdbarch_skip_prologue
+ (current_gdbarch, ecs->stop_func_start);
ecs->sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
ecs->stop_func_start to an address at which a breakpoint may be
legitimately placed.
-
+
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
made, GDB will enter an infinite loop when stepping through
optimized code consisting of VLIW instructions which contain
set, GDB will adjust the breakpoint address to the beginning of
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
-
+
if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
{
ecs->stop_func_start
= gdbarch_adjust_breakpoint_address (current_gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start);
}
if (ecs->stop_func_start == stop_pc)
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
+
/* Do not specify what the fp should be when we stop since on
some machines the prologue is where the new fp value is
established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
step_range_end = step_range_start;
keep_going (ecs);
}
-/* We've just entered a callee, and we wish to resume until it returns
- to the caller. Setting a step_resume breakpoint on the return
- address will catch a return from the callee.
-
- However, if the callee is recursing, we want to be careful not to
- catch returns of those recursive calls, but only of THIS instance
- of the caller.
+/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
+ This is used to both functions and to skip over code. */
- To do this, we set the step_resume bp's frame to our current
- caller's frame (obtained by doing a frame ID unwind). */
+static void
+insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id)
+{
+ /* There should never be more than one step-resume breakpoint per
+ thread, so we should never be setting a new
+ step_resume_breakpoint when one is already active. */
+ gdb_assert (step_resume_breakpoint == NULL);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: inserting step-resume breakpoint at 0x%s\n",
+ paddr_nz (sr_sal.pc));
+
+ step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
+ bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+}
+
+/* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used
+ to skip a potential signal handler.
+
+ This is called with the interrupted function's frame. The signal
+ handler, when it returns, will resume the interrupted function at
+ RETURN_FRAME.pc. */
static void
-step_over_function (struct execution_control_state *ecs)
+insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
struct symtab_and_line sr_sal;
- struct frame_id sr_id;
init_sal (&sr_sal); /* initialize to zeros */
- /* NOTE: cagney/2003-04-06:
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, get_frame_pc (return_frame));
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
- At this point the equality get_frame_pc() == get_frame_func()
- should hold. This may make it possible for this code to tell the
- frame where it's function is, instead of the reverse. This would
- avoid the need to search for the frame's function, which can get
- very messy when there is no debug info available (look at the
- heuristic find pc start code found in targets like the MIPS). */
+ insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
+}
- /* NOTE: cagney/2003-04-06:
+/* Similar to insert_step_resume_breakpoint_at_frame, except
+ but a breakpoint at the previous frame's PC. This is used to
+ skip a function after stepping into it (for "next" or if the called
+ function has no debugging information).
- The intent of DEPRECATED_SAVED_PC_AFTER_CALL was to:
+ The current function has almost always been reached by single
+ stepping a call or return instruction. NEXT_FRAME belongs to the
+ current function, and the breakpoint will be set at the caller's
+ resume address.
- - provide a very light weight equivalent to frame_unwind_pc()
- (nee FRAME_SAVED_PC) that avoids the prologue analyzer
+ This is a separate function rather than reusing
+ insert_step_resume_breakpoint_at_frame in order to avoid
+ get_prev_frame, which may stop prematurely (see the implementation
+ of frame_unwind_id for an example). */
- - avoid handling the case where the PC hasn't been saved in the
- prologue analyzer
+static void
+insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
+{
+ struct symtab_and_line sr_sal;
- Unfortunately, not five lines further down, is a call to
- get_frame_id() and that is guarenteed to trigger the prologue
- analyzer.
-
- The `correct fix' is for the prologe analyzer to handle the case
- where the prologue is incomplete (PC in prologue) and,
- consequently, the return pc has not yet been saved. It should be
- noted that the prologue analyzer needs to handle this case
- anyway: frameless leaf functions that don't save the return PC;
- single stepping through a prologue.
+ /* We shouldn't have gotten here if we don't know where the call site
+ is. */
+ gdb_assert (frame_id_p (frame_unwind_id (next_frame)));
- The d10v handles all this by bailing out of the prologue analsis
- when it reaches the current instruction. */
+ init_sal (&sr_sal); /* initialize to zeros */
- if (DEPRECATED_SAVED_PC_AFTER_CALL_P ())
- sr_sal.pc = ADDR_BITS_REMOVE (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
- else
- sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (get_current_frame ()));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, frame_pc_unwind (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
- check_for_old_step_resume_breakpoint ();
-
- /* NOTE: cagney/2004-03-31: Code using the current value of
- "step_frame_id", instead of unwinding that frame ID, removed. On
- s390 GNU/Linux, after taking a signal, the program is directly
- resumed at the signal handler and, consequently, the PC would
- point at at the first instruction of that signal handler but
- STEP_FRAME_ID would [incorrectly] at the interrupted code when it
- should point at the signal trampoline. By always and locally
- doing a frame ID unwind, it's possible to assert that the code is
- always using the correct ID. */
- sr_id = frame_unwind_id (get_current_frame ());
-
- step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
-
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
}
static void
stop_stepping (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
+
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
- if (ecs->update_step_sp)
- step_sp = read_sp ();
- ecs->update_step_sp = 0;
-
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
The signal was SIGTRAP, e.g. it was our signal, but we
decided we should resume from it.
- We're going to run this baby now!
+ We're going to run this baby now! */
- Insert breakpoints now, unless we are trying to one-proceed
- past a breakpoint. */
- /* If we've just finished a special step resume and we don't
- want to hit a breakpoint, pull em out. */
- if (step_resume_breakpoint == NULL
- && through_sigtramp_breakpoint == NULL
- && ecs->remove_breakpoints_on_following_step)
+ if (!breakpoints_inserted && !ecs->another_trap)
{
- ecs->remove_breakpoints_on_following_step = 0;
- remove_breakpoints ();
- breakpoints_inserted = 0;
- }
- else if (!breakpoints_inserted &&
- (through_sigtramp_breakpoint != NULL || !ecs->another_trap))
- {
- breakpoints_failed = insert_breakpoints ();
- if (breakpoints_failed)
+ /* Stop stepping when inserting breakpoints
+ has failed. */
+ if (insert_breakpoints () != 0)
{
stop_stepping (ecs);
return;
static void
prepare_to_wait (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
if (ecs->infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
{
switch (stop_reason)
{
- case STOP_UNKNOWN:
- /* We don't deal with these cases from handle_inferior_event()
- yet. */
- break;
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
operation for n > 1 */
if (!step_multi || !stop_step)
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "end-stepping-range");
- break;
- case BREAKPOINT_HIT:
- /* We found a breakpoint. */
- /* For now print nothing. */
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
break;
case SIGNAL_EXITED:
/* The inferior was terminated by a signal. */
annotate_signalled ();
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited-signalled");
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
ui_out_text (uiout, "\nProgram terminated with signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-name",
if (stop_info)
{
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited");
+ ui_out_field_string (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED));
ui_out_text (uiout, "\nProgram exited with code ");
ui_out_field_fmt (uiout, "exit-code", "0%o",
(unsigned int) stop_info);
else
{
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited-normally");
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
ui_out_text (uiout, "\nProgram exited normally.\n");
}
+ /* Support the --return-child-result option. */
+ return_child_result_value = stop_info;
break;
case SIGNAL_RECEIVED:
/* Signal received. The signal table tells us to print about
ui_out_text (uiout, "\nProgram received signal ");
annotate_signal_name ();
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "signal-received");
+ ui_out_field_string
+ (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
ui_out_field_string (uiout, "signal-name",
target_signal_to_name (stop_info));
annotate_signal_name_end ();
break;
default:
internal_error (__FILE__, __LINE__,
- "print_stop_reason: unrecognized enum value");
+ _("print_stop_reason: unrecognized enum value"));
break;
}
}
&& last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
- printf_filtered ("[Switching to %s]\n",
+ printf_filtered (_("[Switching to %s]\n"),
target_pid_or_tid_to_str (inferior_ptid));
previous_inferior_ptid = inferior_ptid;
}
/* NOTE drow/2004-01-17: Is this still necessary? */
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
- DECR_PC_AFTER_BREAK */
+ gdbarch_decr_pc_after_break */
if (target_has_execution)
/* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
- DECR_PC_AFTER_BREAK, the program counter can change. Ask the
+ gdbarch_decr_pc_after_break, the program counter can change. Ask the
frame code to check for this and sort out any resultant mess.
- DECR_PC_AFTER_BREAK needs to just go away. */
+ gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
if (target_has_execution && breakpoints_inserted)
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf_filtered ("Cannot remove breakpoints because ");
- printf_filtered ("program is no longer writable.\n");
- printf_filtered ("It might be running in another process.\n");
- printf_filtered ("Further execution is probably impossible.\n");
+ printf_filtered (_("\
+Cannot remove breakpoints because program is no longer writable.\n\
+It might be running in another process.\n\
+Further execution is probably impossible.\n"));
}
}
breakpoints_inserted = 0;
target_terminal_ours ();
+ /* Set the current source location. This will also happen if we
+ display the frame below, but the current SAL will be incorrect
+ during a user hook-stop function. */
+ if (target_has_stack && !stop_stack_dummy)
+ set_current_sal_from_frame (get_current_frame (), 1);
+
/* Look up the hook_stop and run it (CLI internally handles problem
of stop_command's pre-hook not existing). */
if (stop_command)
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame && deprecated_selected_frame)
+ if (stop_print_frame)
{
int bpstat_ret;
int source_flag;
{
case PRINT_UNKNOWN:
/* FIXME: cagney/2002-12-01: Given that a frame ID does
- (or should) carry around the function and does (or
- should) use that when doing a frame comparison. */
+ (or should) carry around the function and does (or
+ should) use that when doing a frame comparison. */
if (stop_step
&& frame_id_eq (step_frame_id,
get_frame_id (get_current_frame ()))
do_frame_printing = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "Unknown value.");
+ internal_error (__FILE__, __LINE__, _("Unknown value."));
}
- /* For mi, have the same behavior every time we stop:
- print everything but the source line. */
- if (ui_out_is_mi_like_p (uiout))
- source_flag = LOC_AND_ADDRESS;
if (ui_out_is_mi_like_p (uiout))
ui_out_field_int (uiout, "thread-id",
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
- print_stack_frame (get_selected_frame (), 0, source_flag);
+ print_stack_frame (get_selected_frame (NULL), 0, source_flag);
/* Display the auto-display expressions. */
do_displays ();
if (proceed_to_finish)
/* NB: The copy goes through to the target picking up the value of
all the registers. */
- regcache_cpy (stop_registers, current_regcache);
+ regcache_cpy (stop_registers, get_current_regcache ());
if (stop_stack_dummy)
{
static void
sig_print_header (void)
{
- printf_filtered ("\
-Signal Stop\tPrint\tPass to program\tDescription\n");
+ printf_filtered (_("\
+Signal Stop\tPrint\tPass to program\tDescription\n"));
}
static void
if (args == NULL)
{
- error_no_arg ("signal to handle");
+ error_no_arg (_("signal to handle"));
}
/* Allocate and zero an array of flags for which signals to handle. */
else
{
/* Not a number and not a recognized flag word => complain. */
- error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
}
}
}
else
{
- printf_unfiltered ("Not confirmed, unchanged.\n");
+ printf_unfiltered (_("Not confirmed, unchanged.\n"));
gdb_flush (gdb_stdout);
}
}
if (validFlag)
handle_command (argBuf, from_tty);
else
- printf_filtered ("Invalid signal handling flag.\n");
+ printf_filtered (_("Invalid signal handling flag.\n"));
if (argBuf)
xfree (argBuf);
}
sig_print_info (oursig);
}
- printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
+ printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
\f
struct inferior_status
write_inferior_status_register (struct inferior_status *inf_status, int regno,
LONGEST val)
{
- int size = DEPRECATED_REGISTER_RAW_SIZE (regno);
+ int size = register_size (current_gdbarch, regno);
void *buf = alloca (size);
store_signed_integer (buf, size, val);
regcache_raw_write (inf_status->registers, regno, buf);
inf_status->stop_registers = regcache_dup_no_passthrough (stop_registers);
- inf_status->registers = regcache_dup (current_regcache);
+ inf_status->registers = regcache_dup (get_current_regcache ());
- inf_status->selected_frame_id = get_frame_id (deprecated_selected_frame);
+ inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
}
selected frame. */
if (frame == NULL)
{
- warning ("Unable to restore previously selected frame.\n");
+ warning (_("Unable to restore previously selected frame."));
return 0;
}
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
- regcache_cpy (current_regcache, inf_status->registers);
+ regcache_cpy (get_current_regcache (), inf_status->registers);
regcache_xfree (inf_status->registers);
/* FIXME: If we are being called after stopping in a function which
DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
- add_info ("signals", signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
+ add_info ("signals", signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("handle", class_run, handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
if (xdb_commands)
{
- add_com ("lz", class_info, signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
- add_com ("z", class_run, xdb_handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("lz", class_info, signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
+ add_com ("z", class_run, xdb_handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"s\" (toggles between stop and nostop), \n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"s\" (toggles between stop and nostop), \n\
\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
}
if (!dbx_commands)
- stop_command =
- add_cmd ("stop", class_obscure, not_just_help_class_command, "There is no `stop' command, but you can set a hook on `stop'.\n\
+ stop_command = add_cmd ("stop", class_obscure,
+ not_just_help_class_command, _("\
+There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
-of the program stops.", &cmdlist);
+of the program stops."), &cmdlist);
+
+ add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
+Set inferior debugging."), _("\
+Show inferior debugging."), _("\
+When non-zero, inferior specific debugging is enabled."),
+ NULL,
+ show_debug_infrun,
+ &setdebuglist, &showdebuglist);
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_stop[TARGET_SIGNAL_CANCEL] = 0;
signal_print[TARGET_SIGNAL_CANCEL] = 0;
-#ifdef SOLIB_ADD
- add_show_from_set
- (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
- (char *) &stop_on_solib_events,
- "Set stopping for shared library events.\n\
+ add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
+ &stop_on_solib_events, _("\
+Set stopping for shared library events."), _("\
+Show stopping for shared library events."), _("\
If nonzero, gdb will give control to the user when the dynamic linker\n\
notifies gdb of shared library events. The most common event of interest\n\
-to the user would be loading/unloading of a new library.\n", &setlist), &showlist);
-#endif
-
- c = add_set_enum_cmd ("follow-fork-mode",
- class_run,
- follow_fork_mode_kind_names, &follow_fork_mode_string,
- "Set debugger response to a program call of fork \
-or vfork.\n\
+to the user would be loading/unloading of a new library."),
+ NULL,
+ show_stop_on_solib_events,
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("follow-fork-mode", class_run,
+ follow_fork_mode_kind_names,
+ &follow_fork_mode_string, _("\
+Set debugger response to a program call of fork or vfork."), _("\
+Show debugger response to a program call of fork or vfork."), _("\
A fork or vfork creates a new process. follow-fork-mode can be:\n\
parent - the original process is debugged after a fork\n\
child - the new process is debugged after a fork\n\
The unfollowed process will continue to run.\n\
-By default, the debugger will follow the parent process.", &setlist);
- add_show_from_set (c, &showlist);
-
- c = add_set_enum_cmd ("scheduler-locking", class_run, scheduler_enums, /* array of string names */
- &scheduler_mode, /* current mode */
- "Set mode for locking scheduler during execution.\n\
+By default, the debugger will follow the parent process."),
+ NULL,
+ show_follow_fork_mode_string,
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("scheduler-locking", class_run,
+ scheduler_enums, &scheduler_mode, _("\
+Set mode for locking scheduler during execution."), _("\
+Show mode for locking scheduler during execution."), _("\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
step == scheduler locked during every single-step operation.\n\
In this mode, no other thread may run during a step command.\n\
- Other threads may run while stepping over a function call ('next').", &setlist);
-
- set_cmd_sfunc (c, set_schedlock_func); /* traps on target vector */
- add_show_from_set (c, &showlist);
-
- c = add_set_cmd ("step-mode", class_run,
- var_boolean, (char *) &step_stop_if_no_debug,
- "Set mode of the step operation. When set, doing a step over a\n\
-function without debug line information will stop at the first\n\
-instruction of that function. Otherwise, the function is skipped and\n\
-the step command stops at a different source line.", &setlist);
- add_show_from_set (c, &showlist);
+ Other threads may run while stepping over a function call ('next')."),
+ set_schedlock_func, /* traps on target vector */
+ show_scheduler_mode,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
+Set mode of the step operation."), _("\
+Show mode of the step operation."), _("\
+When set, doing a step over a function without debug line information\n\
+will stop at the first instruction of that function. Otherwise, the\n\
+function is skipped and the step command stops at a different source line."),
+ NULL,
+ show_step_stop_if_no_debug,
+ &setlist, &showlist);
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
projects / thirdparty / binutils-gdb.git / blobdiff