You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
/* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and
Hitachi-SH processor. It has serial port and a lan port.
static serial_t e7000_desc;
/* Allow user to chose between using hardware breakpoints or memory. */
-static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
+static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
/* Nonzero if using the tcp serial driver. */
-static int using_tcp; /* direct tcp connection to target */
+static int using_tcp; /* direct tcp connection to target */
static int using_tcp_remote; /* indirect connection to target
via tcp to controller */
else if (c < 0)
error ("Serial communication error");
- if (remote_debug)
+ if (remote_debug)
{
putchar_unfiltered (c);
gdb_flush (gdb_stdout);
p++;
p &= 7;
- if (x >= ' ')
- {
+ if (x >= ' ')
+ {
b[p][0] = x;
b[p][1] = 0;
}
else
{
- sprintf(b[p], "<%d>", x);
+ sprintf (b[p], "<%d>", x);
}
return b[p];
c = readchar (timeout);
#if 0
notice_quit ();
- if (quit_flag == 1)
+ if (quit_flag == 1)
{
if (ctrl_c)
{
- putchar_e7000(CTRLC);
+ putchar_e7000 (CTRLC);
--ctrl_c;
}
- else
+ else
{
quit ();
}
}
#endif
-
+
if (echo)
{
if (c == '\r' || c == '\n')
timeout = oldtimeout;
}
-static int
-e7000_parse_device (args, dev_name, baudrate)
- char *args;
- char *dev_name;
- int baudrate;
+static int
+e7000_parse_device (args, dev_name, baudrate)
+ char *args;
+ char *dev_name;
+ int baudrate;
{
char junk[128];
int n = 0;
strcpy (dev_name, args);
using_pc = 1;
}
- else
+ else
{
/* FIXME! temp hack to allow use with port master -
- target tcp_remote <device> */
- if (args && strncmp (args, "tcp", 10) == 0)
- {
+ target tcp_remote <device> */
+ if (args && strncmp (args, "tcp", 10) == 0)
+ {
char com_type[128];
n = sscanf (args, " %s %s %d %s", com_type, dev_name, &baudrate, junk);
- using_tcp_remote=1;
+ using_tcp_remote = 1;
n--;
- }
- else if (args)
+ }
+ else if (args)
{
n = sscanf (args, " %s %d %s", dev_name, &baudrate, junk);
}
}
#endif
if (!using_tcp_remote && strchr (dev_name, ':'))
- using_tcp = 1;
+ using_tcp = 1;
}
return n;
/* Hello? Are you there? */
sync = 0;
- loop = 0;
+ loop = 0;
try = 0;
quit_trying = 20;
putchar_e7000 (CTRLC);
if (c == ':')
sync = 1;
- if (loop++ == 20)
+ if (loop++ == 20)
{
putchar_e7000 (CTRLC);
loop = 0;
}
- QUIT ;
+ QUIT;
if (quit_flag)
{
putchar_e7000 (CTRLC);
/* Was-> quit_flag = 0; */
c = -1;
- quit_trying = try+1; /* we don't want to try anymore */
+ quit_trying = try + 1; /* we don't want to try anymore */
}
else
{
if (!sync)
{
- fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n",try);
+ fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n", try);
error ("Unable to syncronize with target.\n");
}
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
- if (!catch_errors (e7000_start_remote, (char *)0,
- "Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
- if (from_tty)
- printf_filtered ("Remote target %s connected to %s\n", target_shortname,
- dev_name);
+ if (!catch_errors (e7000_start_remote, (char *) 0,
+ "Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
+ if (from_tty)
+ printf_filtered ("Remote target %s connected to %s\n", target_shortname,
+ dev_name);
}
/* Close out all files and local state before this target loses control. */
000218 MOV.B R1L,R2L
STEP NORMAL END or
BREAK POINT
- */
+ */
#ifdef GDB_TARGET_IS_H8300
void
fetch_regs_from_dump (nextchar, want)
- int (*nextchar)();
+ int (*nextchar) ();
char *want;
{
int regno;
{
case '\n':
/* Skip to end of line and then eat all new line type stuff */
- while (thischar != '\n' && thischar != '\r')
+ while (thischar != '\n' && thischar != '\r')
thischar = nextchar ();
- while (thischar == '\n' || thischar == '\r')
+ while (thischar == '\n' || thischar == '\r')
thischar = nextchar ();
want++;
break;
thischar = nextchar ();
want++;
break;
-
+
default:
if (*want == thischar)
{
want++;
if (*want)
thischar = nextchar ();
-
+
}
else if (thischar == ' ' || thischar == '\n' || thischar == '\r')
{
thischar = nextchar ();
}
- else {
- error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>",
- want, thischar, thischar);
- }
-
+ else
+ {
+ error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>",
+ want, thischar, thischar);
+ }
+
break;
case '%':
/* Got a register command */
#endif
default:
- if (isdigit (want[0]))
+ if (isdigit (want[0]))
{
if (isdigit (want[1]))
{
regno = (want[0] - '0') * 10 + want[1] - '0';
want += 2;
}
- else
+ else
{
regno = want[0] - '0';
want++;
}
}
-
+
else
abort ();
}
store_signed_integer (buf,
- REGISTER_RAW_SIZE(regno),
+ REGISTER_RAW_SIZE (regno),
(LONGEST) get_hex (&thischar, nextchar));
supply_register (regno, buf);
break;
/* Write a large ammount of memory, this only works with the serial
mode enabled. Command is sent as
- il ;s:s\r ->
- <- il ;s:s\r
- <- ENQ
- ACK ->
- <- LO s\r
- Srecords...
- ^Z ->
- <- ENQ
- ACK ->
- <- :
- */
+ il ;s:s\r ->
+ <- il ;s:s\r
+ <- ENQ
+ ACK ->
+ <- LO s\r
+ Srecords...
+ ^Z ->
+ <- ENQ
+ ACK ->
+ <- :
+ */
static int
write_large (memaddr, myaddr, len)
else
{
printf_unfiltered ("@%d}@", j);
- while ((j = readchar (0)) > 0)
+ while ((j = readchar (0)) > 0)
{
- printf_unfiltered ("@{%d}@",j);
+ printf_unfiltered ("@{%d}@", j);
}
}
}
/* Read LEN bytes from inferior memory at MEMADDR. Put the result
at debugger address MYADDR. Returns length moved.
- Small transactions we send
- m <addr>;l
- and receive
- 00000000 12345678 ?
+ Small transactions we send
+ and receive
+ 00000000 12345678 ?
*/
static int
char buf[200];
/* Starting address of this pass. */
-/* printf("READ INF %x %x %d\n", memaddr, myaddr, len);*/
+/* printf("READ INF %x %x %d\n", memaddr, myaddr, len); */
if (((memaddr - 1) + len) < memaddr)
{
errno = EIO;
sprintf (buf, "m %x;l\r", memaddr);
puts_e7000debug (buf);
- for (count = 0; count < len; count += 4)
+ for (count = 0; count < len; count += 4)
{
/* Suck away the address */
- c = gch ();
+ c = gch ();
while (c != ' ')
- c = gch ();
+ c = gch ();
c = gch ();
- if (c == '*')
+ if (c == '*')
{ /* Some kind of error */
- puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */
- expect_full_prompt();
+ puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */
+ expect_full_prompt ();
return -1;
}
while (c != ' ')
- c = gch ();
+ c = gch ();
/* Now read in the data */
- for (i = 0; i < 4; i++)
+ for (i = 0; i < 4; i++)
{
- int b = gbyte();
- if (count + i < len) {
- myaddr[count + i] = b;
- }
+ int b = gbyte ();
+ if (count + i < len)
+ {
+ myaddr[count + i] = b;
+ }
}
/* Skip the trailing ? and send a . to end and a cr for more */
- gch ();
+ gch ();
gch ();
if (count + 4 >= len)
- puts_e7000debug(".\r");
+ puts_e7000debug (".\r");
else
- puts_e7000debug("\r");
+ puts_e7000debug ("\r");
}
- expect_prompt();
+ expect_prompt ();
return len;
}
/*
- For large transfers we used to send
+ For large transfers we used to send
- d <addr> <endaddr>\r
- and receive
+ and receive
<ADDRESS> < D A T A > < ASCII CODE >
00000000 5F FD FD FF DF 7F DF FF 01 00 01 00 02 00 08 04 "_..............."
00000010 FF D7 FF 7F D7 F1 7F FF 00 05 00 00 08 00 40 00 "..............@."
00000020 7F FD FF F7 7F FF FF F7 00 00 00 00 00 00 00 00 "................"
- A cost in chars for each transaction of 80 + 5*n-bytes.
+ A cost in chars for each transaction of 80 + 5*n-bytes.
- Large transactions could be done with the srecord load code, but
- there is a pause for a second before dumping starts, which slows the
- average rate down!
-*/
+ Large transactions could be done with the srecord load code, but
+ there is a pause for a second before dumping starts, which slows the
+ average rate down!
+ */
static int
e7000_read_inferior_memory_large (memaddr, myaddr, len)
count = 0;
c = gch ();
-
+
/* skip down to the first ">" */
- while( c != '>' )
+ while (c != '>')
c = gch ();
/* now skip to the end of that line */
- while( c != '\r' )
+ while (c != '\r')
c = gch ();
c = gch ();
}
}
/* throw out the rest of the line */
- while( c != '\r' )
+ while (c != '\r')
c = gch ();
}
struct target_ops *target; /* ignored */
{
if (write)
- return e7000_write_inferior_memory( memaddr, myaddr, len);
- else
- if( len < 16 )
- return e7000_read_inferior_memory( memaddr, myaddr, len);
- else
- return e7000_read_inferior_memory_large( memaddr, myaddr, len);
+ return e7000_write_inferior_memory (memaddr, myaddr, len);
+ else if (len < 16)
+ return e7000_read_inferior_memory (memaddr, myaddr, len);
+ else
+ return e7000_read_inferior_memory_large (memaddr, myaddr, len);
}
static void
bfd *pbfd;
bfd_vma entry;
#define WRITESIZE 0x1000
- char buf[2 + 4 + 4 + WRITESIZE]; /* `DT' + <addr> + <len> + <data> */
+ char buf[2 + 4 + 4 + WRITESIZE];
/* `DT' + <addr> + <len> + <data> */
char *filename;
int quiet;
int nostart;
time_t start_time, end_time; /* Start and end times of download */
unsigned long data_count; /* Number of bytes transferred to memory */
- int oldtimeout = timeout;
+ int oldtimeout = timeout;
timeout = remote_timeout;
{
char *arg;
- while (isspace (*args)) args++;
+ while (isspace (*args))
+ args++;
arg = args;
- while ((*args != '\000') && !isspace (*args)) args++;
+ while ((*args != '\000') && !isspace (*args))
+ args++;
if (*args != '\000')
*args++ = '\000';
}
old_chain = make_cleanup ((make_cleanup_func) bfd_close, pbfd);
- if (!bfd_check_format (pbfd, bfd_object))
+ if (!bfd_check_format (pbfd, bfd_object))
error ("\"%s\" is not an object file: %s", filename,
bfd_errmsg (bfd_get_error ()));
expect ("\nOK");
- for (section = pbfd->sections; section; section = section->next)
+ for (section = pbfd->sections; section; section = section->next)
{
if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
{
section_size);
fptr = 0;
-
+
data_count += section_size;
while (section_size > 0)
if (SERIAL_WRITE (e7000_desc, buf, count + 10))
fprintf_unfiltered (gdb_stderr,
"e7000_load: SERIAL_WRITE failed: %s\n",
- safe_strerror(errno));
+ safe_strerror (errno));
expect ("OK");
if (!quiet)
printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
-/* start_routine (entry);*/
+/* start_routine (entry); */
}
report_transfer_performance (data_count, start_time, end_time);
/* Since we can change to soft breakpoints dynamically, we must define
more than enough. Was breakaddr[MAX_E7000DEBUG_BREAKPOINTS]. */
-static CORE_ADDR breakaddr[MAX_BREAKPOINTS] = {0};
+static CORE_ADDR breakaddr[MAX_BREAKPOINTS] =
+{0};
static int
e7000_insert_breakpoint (addr, shadow)
breakaddr[i] = addr;
/* Save old contents, and insert a nop in the space */
#ifdef HARD_BREAKPOINTS
- if (BC_BREAKPOINTS)
+ if (BC_BREAKPOINTS)
{
- sprintf (buf, "BC%d A=%x\r", i+1, addr);
+ sprintf (buf, "BC%d A=%x\r", i + 1, addr);
puts_e7000debug (buf);
}
- else
+ else
{
sprintf (buf, "B %x\r", addr);
puts_e7000debug (buf);
{
breakaddr[i] = 0;
#ifdef HARD_BREAKPOINTS
- if (BC_BREAKPOINTS)
+ if (BC_BREAKPOINTS)
{
- sprintf (buf, "BC%d - \r", i+1);
+ sprintf (buf, "BC%d - \r", i + 1);
puts_e7000debug (buf);
}
- else
+ else
{
- sprintf (buf, "B - %x\r", addr);
+ sprintf (buf, "B - %x\r", addr);
puts_e7000debug (buf);
}
expect_prompt ();
{
int c;
- puts_e7000debug("end\r");
+ puts_e7000debug ("end\r");
putchar_e7000 (CTRLC);
while ((c = readchar (1) != -1))
{
if (quit_flag)
{
- putchar_e7000(CTRLC);
+ putchar_e7000 (CTRLC);
quit_flag = 0;
}
if (c > ' ' && c < 127)
static int
why_stop ()
{
- static char *strings[NITEMS] = {
+ static char *strings[NITEMS] =
+ {
"STEP NORMAL",
"BREAK POINT",
"BREAK KEY",
for (i = 0; i < NITEMS; ++i)
p[i] = strings[i];
-
+
c = gch ();
while (1)
{
for (i = 0; i < NITEMS; i++)
{
- if (c == *(p[i]))
+ if (c == *(p[i]))
{
p[i]++;
- if (*(p[i]) == 0)
- {
+ if (*(p[i]) == 0)
+ {
/* found one of the choices */
return i;
}
int
expect_n (strings)
-char **strings;
+ char **strings;
{
char *(ptr[10]);
- int n;
+ int n;
int c;
char saveaway[100];
char *buffer = saveaway;
/* Count number of expect strings */
- for (n = 0; strings[n]; n++)
+ for (n = 0; strings[n]; n++)
{
ptr[n] = strings[n];
}
#ifdef __GO32__
if (kbhit ())
{
- int k = getkey();
+ int k = getkey ();
if (k == 1)
quit_flag = 1;
for (i = 0; i < n; i++)
{
- if (c == ptr[i][0])
+ if (c == ptr[i][0])
{
ptr[i]++;
if (ptr[i][0] == 0)
ptr[i] = strings[i];
}
}
-
+
if (gotone)
{
/* Save it up incase we find that there was no match */
- *buffer ++ = c;
+ *buffer++ = c;
}
else
{
- if (buffer != saveaway)
+ if (buffer != saveaway)
{
*buffer++ = 0;
printf_unfiltered ("%s", buffer);
char buf2[200];
store_signed_integer (buf,
- REGISTER_RAW_SIZE(PC_REGNUM),
- read_register (PC_REGNUM) -2);
+ REGISTER_RAW_SIZE (PC_REGNUM),
+ read_register (PC_REGNUM) - 2);
supply_register (PC_REGNUM, buf);
sprintf (buf2, ".PC %x\r", read_register (PC_REGNUM));
puts_e7000debug (buf2);
#define WAS_RUNNING 2
#define WAS_OTHER 3
-static char *estrings[] = {
+static char *estrings[] =
+{
"** SLEEP",
"BREAK !",
"** PC",
while (loop)
{
switch (expect_n (estrings))
- {
+ {
case WAS_OTHER:
/* how did this happen ? */
loop = 0;
switch (stop_reason)
{
case 1: /* Breakpoint */
- write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */
- status->value.sig = TARGET_SIGNAL_TRAP;
+ write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */
+ status->value.sig = TARGET_SIGNAL_TRAP;
break;
case 0: /* Single step */
- status->value.sig = TARGET_SIGNAL_TRAP;
+ status->value.sig = TARGET_SIGNAL_TRAP;
break;
case 2: /* Interrupt */
if (had_sleep)
{
- status->value.sig = TARGET_SIGNAL_TRAP;
+ status->value.sig = TARGET_SIGNAL_TRAP;
sub2_from_pc ();
}
else
{
- status->value.sig = TARGET_SIGNAL_INT;
+ status->value.sig = TARGET_SIGNAL_INT;
}
break;
case 3:
break;
case 4:
printf_unfiltered ("a cycle address error?\n");
- status->value.sig = TARGET_SIGNAL_UNKNOWN;
+ status->value.sig = TARGET_SIGNAL_UNKNOWN;
break;
case 5:
- status->value.sig = TARGET_SIGNAL_ILL;
+ status->value.sig = TARGET_SIGNAL_ILL;
break;
case 6:
- status->value.sig = TARGET_SIGNAL_SEGV;
+ status->value.sig = TARGET_SIGNAL_SEGV;
break;
case 7: /* Anything else (NITEMS + 1) */
printf_unfiltered ("a write protect error?\n");
- status->value.sig = TARGET_SIGNAL_UNKNOWN;
+ status->value.sig = TARGET_SIGNAL_UNKNOWN;
break;
default:
/* Get the user's attention - this should never happen. */
/* Stop the running program. */
static void
-e7000_stop ()
+e7000_stop ()
{
/* Sending a ^C is supposed to stop the running program. */
putchar_e7000 (CTRLC);
/* Define the target subroutine names. */
-struct target_ops e7000_ops ;
+struct target_ops e7000_ops;
-static void
-init_e7000_ops(void)
+static void
+init_e7000_ops (void)
{
- e7000_ops.to_shortname = "e7000";
- e7000_ops.to_longname = "Remote Hitachi e7000 target";
- e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
+ e7000_ops.to_shortname = "e7000";
+ e7000_ops.to_longname = "Remote Hitachi e7000 target";
+ e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
or a network connection.\n\
Arguments are the name of the device for the serial line,\n\
the speed to connect at in bits per second.\n\
eg\n\
target e7000 /dev/ttya 9600\n\
-target e7000 foobar" ;
- e7000_ops.to_open = e7000_open;
- e7000_ops.to_close = e7000_close;
- e7000_ops.to_attach = 0;
+target e7000 foobar";
+ e7000_ops.to_open = e7000_open;
+ e7000_ops.to_close = e7000_close;
+ e7000_ops.to_attach = 0;
e7000_ops.to_post_attach = NULL;
- e7000_ops.to_require_attach = NULL;
- e7000_ops.to_detach = e7000_detach;
- e7000_ops.to_require_detach = NULL;
- e7000_ops.to_resume = e7000_resume;
- e7000_ops.to_wait = e7000_wait;
- e7000_ops.to_post_wait = NULL;
- e7000_ops.to_fetch_registers = e7000_fetch_register;
- e7000_ops.to_store_registers = e7000_store_register;
- e7000_ops.to_prepare_to_store = e7000_prepare_to_store;
- e7000_ops.to_xfer_memory = e7000_xfer_inferior_memory;
- e7000_ops.to_files_info = e7000_files_info;
- e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint;
- e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint;
- e7000_ops.to_terminal_init = 0;
- e7000_ops.to_terminal_inferior = 0;
- e7000_ops.to_terminal_ours_for_output = 0;
- e7000_ops.to_terminal_ours = 0;
- e7000_ops.to_terminal_info = 0;
- e7000_ops.to_kill = e7000_kill;
- e7000_ops.to_load = e7000_load;
- e7000_ops.to_lookup_symbol = 0;
- e7000_ops.to_create_inferior = e7000_create_inferior;
+ e7000_ops.to_require_attach = NULL;
+ e7000_ops.to_detach = e7000_detach;
+ e7000_ops.to_require_detach = NULL;
+ e7000_ops.to_resume = e7000_resume;
+ e7000_ops.to_wait = e7000_wait;
+ e7000_ops.to_post_wait = NULL;
+ e7000_ops.to_fetch_registers = e7000_fetch_register;
+ e7000_ops.to_store_registers = e7000_store_register;
+ e7000_ops.to_prepare_to_store = e7000_prepare_to_store;
+ e7000_ops.to_xfer_memory = e7000_xfer_inferior_memory;
+ e7000_ops.to_files_info = e7000_files_info;
+ e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint;
+ e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint;
+ e7000_ops.to_terminal_init = 0;
+ e7000_ops.to_terminal_inferior = 0;
+ e7000_ops.to_terminal_ours_for_output = 0;
+ e7000_ops.to_terminal_ours = 0;
+ e7000_ops.to_terminal_info = 0;
+ e7000_ops.to_kill = e7000_kill;
+ e7000_ops.to_load = e7000_load;
+ e7000_ops.to_lookup_symbol = 0;
+ e7000_ops.to_create_inferior = e7000_create_inferior;
e7000_ops.to_post_startup_inferior = NULL;
e7000_ops.to_acknowledge_created_inferior = NULL;
- e7000_ops.to_clone_and_follow_inferior = NULL;
- e7000_ops.to_post_follow_inferior_by_clone = NULL;
+ e7000_ops.to_clone_and_follow_inferior = NULL;
+ e7000_ops.to_post_follow_inferior_by_clone = NULL;
e7000_ops.to_insert_fork_catchpoint = NULL;
e7000_ops.to_remove_fork_catchpoint = NULL;
e7000_ops.to_insert_vfork_catchpoint = NULL;
- e7000_ops.to_remove_vfork_catchpoint = NULL;
+ e7000_ops.to_remove_vfork_catchpoint = NULL;
e7000_ops.to_has_forked = NULL;
e7000_ops.to_has_vforked = NULL;
- e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;
+ e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;
e7000_ops.to_post_follow_vfork = NULL;
e7000_ops.to_insert_exec_catchpoint = NULL;
e7000_ops.to_remove_exec_catchpoint = NULL;
e7000_ops.to_has_execd = NULL;
e7000_ops.to_reported_exec_events_per_exec_call = NULL;
e7000_ops.to_has_exited = NULL;
- e7000_ops.to_mourn_inferior = e7000_mourn_inferior;
- e7000_ops.to_can_run = 0;
- e7000_ops.to_notice_signals = 0;
- e7000_ops.to_thread_alive = 0;
- e7000_ops.to_stop = e7000_stop;
- e7000_ops.to_pid_to_exec_file = NULL;
+ e7000_ops.to_mourn_inferior = e7000_mourn_inferior;
+ e7000_ops.to_can_run = 0;
+ e7000_ops.to_notice_signals = 0;
+ e7000_ops.to_thread_alive = 0;
+ e7000_ops.to_stop = e7000_stop;
+ e7000_ops.to_pid_to_exec_file = NULL;
e7000_ops.to_core_file_to_sym_file = NULL;
- e7000_ops.to_stratum = process_stratum;
- e7000_ops.DONT_USE = 0;
- e7000_ops.to_has_all_memory = 1;
- e7000_ops.to_has_memory = 1;
- e7000_ops.to_has_stack = 1;
- e7000_ops.to_has_registers = 1;
- e7000_ops.to_has_execution = 1;
- e7000_ops.to_sections = 0;
- e7000_ops.to_sections_end = 0;
- e7000_ops.to_magic = OPS_MAGIC;
+ e7000_ops.to_stratum = process_stratum;
+ e7000_ops.DONT_USE = 0;
+ e7000_ops.to_has_all_memory = 1;
+ e7000_ops.to_has_memory = 1;
+ e7000_ops.to_has_stack = 1;
+ e7000_ops.to_has_registers = 1;
+ e7000_ops.to_has_execution = 1;
+ e7000_ops.to_sections = 0;
+ e7000_ops.to_sections_end = 0;
+ e7000_ops.to_magic = OPS_MAGIC;
};
void
_initialize_remote_e7000 ()
{
- init_e7000_ops() ;
+ init_e7000_ops ();
add_target (&e7000_ops);
add_com ("e7000", class_obscure, e7000_command,
"Drain pending e7000 text buffers.");
add_show_from_set (add_set_cmd ("usehardbreakpoints", no_class,
- var_integer, (char *)&use_hard_breakpoints,
- "Set use of hardware breakpoints for all breakpoints.\n", &setlist),
+ var_integer, (char *) &use_hard_breakpoints,
+ "Set use of hardware breakpoints for all breakpoints.\n", &setlist),
&showlist);
}
projects / thirdparty / binutils-gdb.git / blobdiff