Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Contributed by Intel Corporation. Modified from remote.c by Chris Benenati.
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
-
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
-
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+ GDB is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY. No author or distributor accepts responsibility to anyone
+ for the consequences of using it or for whether it serves any
+ particular purpose or works at all, unless he says so in writing.
+ Refer to the GDB General Public License for full details.
+
+ Everyone is granted permission to copy, modify and redistribute GDB,
+ but only under the conditions described in the GDB General Public
+ License. A copy of this license is supposed to have been given to you
+ along with GDB so you can know your rights and responsibilities. It
+ should be in a file named COPYING. Among other things, the copyright
+ notice and this notice must be preserved on all copies.
+
+ In other words, go ahead and share GDB, but don't try to stop
+ anyone else from sharing it farther. Help stamp out software hoarding!
+ */
/*
-Except for the data cache routines, this file bears little resemblence
-to remote.c. A new (although similar) protocol has been specified, and
-portions of the code are entirely dependent on having an i80960 with a
-NINDY ROM monitor at the other end of the line.
-*/
+ Except for the data cache routines, this file bears little resemblence
+ to remote.c. A new (although similar) protocol has been specified, and
+ portions of the code are entirely dependent on having an i80960 with a
+ NINDY ROM monitor at the other end of the line.
+ */
/*****************************************************************************
*
static DCACHE *nindy_dcache;
-extern int unlink();
-extern char *getenv();
-extern char *mktemp();
+extern int unlink ();
+extern char *getenv ();
+extern char *mktemp ();
extern void generic_mourn_inferior ();
extern int ninMemGet ();
extern int ninMemPut ();
-int nindy_initial_brk; /* nonzero if want to send an initial BREAK to nindy */
-int nindy_old_protocol; /* nonzero if want to use old protocol */
-char *nindy_ttyname; /* name of tty to talk to nindy on, or null */
+int nindy_initial_brk; /* nonzero if want to send an initial BREAK to nindy */
+int nindy_old_protocol; /* nonzero if want to use old protocol */
+char *nindy_ttyname; /* name of tty to talk to nindy on, or null */
-#define DLE '\020' /* Character NINDY sends to indicate user program has
- * halted. */
+#define DLE '\020' /* Character NINDY sends to indicate user program has
+ * halted. */
#define TRUE 1
#define FALSE 0
static int have_regs = 0; /* 1 iff regs read since i960 last halted */
static int regs_changed = 0; /* 1 iff regs were modified since last read */
-extern char *exists();
+extern char *exists ();
static void
nindy_fetch_registers PARAMS ((int));
and initial_brk). */
void
nindy_open (name, from_tty)
- char *name; /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
- int from_tty;
+ char *name; /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
+ int from_tty;
{
char baudrate[1024];
nindy_close (0);
have_regs = regs_changed = 0;
- nindy_dcache = dcache_init(ninMemGet, ninMemPut);
+ nindy_dcache = dcache_init (ninMemGet, ninMemPut);
/* Allow user to interrupt the following -- we could hang if there's
no NINDY at the other end of the remote tty. */
/* If baud_rate is -1, then ninConnect will not recognize the baud rate
and will deal with the situation in a (more or less) reasonable
fashion. */
- sprintf(baudrate, "%d", baud_rate);
- ninConnect(name, baudrate,
- nindy_initial_brk, !from_tty, nindy_old_protocol);
+ sprintf (baudrate, "%d", baud_rate);
+ ninConnect (name, baudrate,
+ nindy_initial_brk, !from_tty, nindy_old_protocol);
immediate_quit--;
if (nindy_serial == NULL)
savename = savestring (name, strlen (name));
push_target (&nindy_ops);
- target_fetch_registers(-1);
+ target_fetch_registers (-1);
init_thread_list ();
init_wait_for_inferior ();
nindy_files_info ()
{
/* FIXME: this lies about the baud rate if we autobauded. */
- printf_unfiltered("\tAttached to %s at %d bits per second%s%s.\n", savename,
- baud_rate,
- nindy_old_protocol? " in old protocol": "",
- nindy_initial_brk? " with initial break": "");
+ printf_unfiltered ("\tAttached to %s at %d bits per second%s%s.\n", savename,
+ baud_rate,
+ nindy_old_protocol ? " in old protocol" : "",
+ nindy_initial_brk ? " with initial break" : "");
}
\f
/* Return the number of characters in the buffer before
static
int
-non_dle( buf, n )
- char *buf; /* Character buffer; NOT '\0'-terminated */
- int n; /* Number of characters in buffer */
+non_dle (buf, n)
+ char *buf; /* Character buffer; NOT '\0'-terminated */
+ int n; /* Number of characters in buffer */
{
int i;
- for ( i = 0; i < n; i++ ){
- if ( buf[i] == DLE ){
- break;
+ for (i = 0; i < n; i++)
+ {
+ if (buf[i] == DLE)
+ {
+ break;
+ }
}
- }
return i;
}
\f
if (siggnal != TARGET_SIGNAL_0 && siggnal != stop_signal)
warning ("Can't send signals to remote NINDY targets.");
- dcache_flush(nindy_dcache);
- if ( regs_changed )
+ dcache_flush (nindy_dcache);
+ if (regs_changed)
{
nindy_store_registers (-1);
regs_changed = 0;
}
have_regs = 0;
- ninGo( step );
+ ninGo (step);
}
\f
/* FIXME, we can probably use the normal terminal_inferior stuff here.
settings initially. Thereafter, terminal_ours and terminal_inferior
will automatically swap the settings around for us. */
-struct clean_up_tty_args {
+struct clean_up_tty_args
+{
serial_ttystate state;
serial_t serial;
};
-static struct clean_up_tty_args tty_args;
+static struct clean_up_tty_args tty_args;
static void
clean_up_tty (ptrarg)
}
/* Recover from ^Z or ^C while remote process is running */
-static void (*old_ctrlc)();
+static void (*old_ctrlc) ();
#ifdef SIGTSTP
-static void (*old_ctrlz)();
+static void (*old_ctrlz) ();
#endif
static void
-clean_up_int()
+clean_up_int ()
{
SERIAL_SET_TTY_STATE (tty_args.serial, tty_args.state);
free (tty_args.state);
- signal(SIGINT, old_ctrlc);
+ signal (SIGINT, old_ctrlc);
#ifdef SIGTSTP
- signal(SIGTSTP, old_ctrlz);
+ signal (SIGTSTP, old_ctrlz);
#endif
- error("\n\nYou may need to reset the 80960 and/or reload your program.\n");
+ error ("\n\nYou may need to reset the 80960 and/or reload your program.\n");
}
/* Wait until the remote machine stops. While waiting, operate in passthrough
*/
static int
-nindy_wait( pid, status )
- int pid;
- struct target_waitstatus *status;
+nindy_wait (pid, status)
+ int pid;
+ struct target_waitstatus *status;
{
fd_set fds;
int c;
/* Save current tty attributes, and restore them when done. */
tty_args.serial = SERIAL_FDOPEN (0);
tty_args.state = SERIAL_GET_TTY_STATE (tty_args.serial);
- old_ctrlc = signal( SIGINT, clean_up_int );
+ old_ctrlc = signal (SIGINT, clean_up_int);
#ifdef SIGTSTP
- old_ctrlz = signal( SIGTSTP, clean_up_int );
+ old_ctrlz = signal (SIGTSTP, clean_up_int);
#endif
old_cleanups = make_cleanup (clean_up_tty, &tty_args);
{
error ("Cannot read from serial line");
}
- else if (c == 0x1b) /* ESC */
+ else if (c == 0x1b) /* ESC */
{
c = SERIAL_READCHAR (nindy_serial, -1);
c &= ~0x40;
- }
- else if (c != 0x10) /* DLE */
+ }
+ else if (c != 0x10) /* DLE */
/* Write out any characters preceding DLE */
{
- buf[0] = (char)c;
+ buf[0] = (char) c;
write (1, buf, 1);
}
else
{
- stop_exit = ninStopWhy(&stop_code,
- &ip_value, &fp_value, &sp_value);
+ stop_exit = ninStopWhy (&stop_code,
+ &ip_value, &fp_value, &sp_value);
if (!stop_exit && (stop_code == STOP_SRQ))
{
immediate_quit++;
- ninSrq();
+ ninSrq ();
immediate_quit--;
}
else
{
/* Get out of loop */
- supply_register (IP_REGNUM,
- (char *)&ip_value);
- supply_register (FP_REGNUM,
- (char *)&fp_value);
- supply_register (SP_REGNUM,
- (char *)&sp_value);
+ supply_register (IP_REGNUM,
+ (char *) &ip_value);
+ supply_register (FP_REGNUM,
+ (char *) &fp_value);
+ supply_register (SP_REGNUM,
+ (char *) &sp_value);
break;
}
}
/* Read the remote registers into the block REGS. */
/* This is the block that ninRegsGet and ninRegsPut handles. */
-struct nindy_regs {
- char local_regs[16 * 4];
- char global_regs[16 * 4];
- char pcw_acw[2 * 4];
- char ip[4];
- char tcw[4];
- char fp_as_double[4 * 8];
+struct nindy_regs
+{
+ char local_regs[16 * 4];
+ char global_regs[16 * 4];
+ char pcw_acw[2 * 4];
+ char ip[4];
+ char tcw[4];
+ char fp_as_double[4 * 8];
};
static void
-nindy_fetch_registers(regno)
+nindy_fetch_registers (regno)
int regno;
{
struct nindy_regs nindy_regs;
int regnum;
immediate_quit++;
- ninRegsGet( (char *) &nindy_regs );
+ ninRegsGet ((char *) &nindy_regs);
immediate_quit--;
- memcpy (®isters[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16*4);
- memcpy (®isters[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
- memcpy (®isters[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2*4);
- memcpy (®isters[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1*4);
- memcpy (®isters[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1*4);
+ memcpy (®isters[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16 * 4);
+ memcpy (®isters[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16 * 4);
+ memcpy (®isters[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2 * 4);
+ memcpy (®isters[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1 * 4);
+ memcpy (®isters[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1 * 4);
memcpy (®isters[REGISTER_BYTE (FP0_REGNUM)], nindy_regs.fp_as_double, 4 * 8);
registers_fetched ();
}
static void
-nindy_prepare_to_store()
+nindy_prepare_to_store ()
{
/* Fetch all regs if they aren't already here. */
read_register_bytes (0, NULL, REGISTER_BYTES);
}
static void
-nindy_store_registers(regno)
+nindy_store_registers (regno)
int regno;
{
struct nindy_regs nindy_regs;
int regnum;
- memcpy (nindy_regs.local_regs, ®isters[REGISTER_BYTE (R0_REGNUM)], 16*4);
- memcpy (nindy_regs.global_regs, ®isters[REGISTER_BYTE (G0_REGNUM)], 16*4);
- memcpy (nindy_regs.pcw_acw, ®isters[REGISTER_BYTE (PCW_REGNUM)], 2*4);
- memcpy (nindy_regs.ip, ®isters[REGISTER_BYTE (IP_REGNUM)], 1*4);
- memcpy (nindy_regs.tcw, ®isters[REGISTER_BYTE (TCW_REGNUM)], 1*4);
- memcpy (nindy_regs.fp_as_double, ®isters[REGISTER_BYTE (FP0_REGNUM)], 8*4);
+ memcpy (nindy_regs.local_regs, ®isters[REGISTER_BYTE (R0_REGNUM)], 16 * 4);
+ memcpy (nindy_regs.global_regs, ®isters[REGISTER_BYTE (G0_REGNUM)], 16 * 4);
+ memcpy (nindy_regs.pcw_acw, ®isters[REGISTER_BYTE (PCW_REGNUM)], 2 * 4);
+ memcpy (nindy_regs.ip, ®isters[REGISTER_BYTE (IP_REGNUM)], 1 * 4);
+ memcpy (nindy_regs.tcw, ®isters[REGISTER_BYTE (TCW_REGNUM)], 1 * 4);
+ memcpy (nindy_regs.fp_as_double, ®isters[REGISTER_BYTE (FP0_REGNUM)], 8 * 4);
immediate_quit++;
- ninRegsPut( (char *) &nindy_regs );
+ ninRegsPut ((char *) &nindy_regs);
immediate_quit--;
}
nindy_fetch_word (addr)
CORE_ADDR addr;
{
- return dcache_fetch (nindy_dcache, addr);
+ return dcache_fetch (nindy_dcache, addr);
}
/* Write a word WORD into remote address ADDR.
CORE_ADDR addr;
int word;
{
- dcache_poke (nindy_dcache, addr, word);
+ dcache_poke (nindy_dcache, addr, word);
}
/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
FIXME, rewrite this to not use the word-oriented routines. */
int
-nindy_xfer_inferior_memory(memaddr, myaddr, len, should_write, target)
+nindy_xfer_inferior_memory (memaddr, myaddr, len, should_write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
int should_write;
- struct target_ops *target; /* ignored */
+ struct target_ops *target; /* ignored */
{
register int i;
/* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & - sizeof (int);
+ register CORE_ADDR addr = memaddr & -sizeof (int);
/* Round ending address up; get number of longwords that makes. */
register int count
- = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+ = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
/* Allocate buffer of that many longwords. */
register int *buffer = (int *) alloca (count * sizeof (int));
{
/* Fill start and end extra bytes of buffer with existing memory data. */
- if (addr != memaddr || len < (int)sizeof (int)) {
- /* Need part of initial word -- fetch it. */
- buffer[0] = nindy_fetch_word (addr);
- }
+ if (addr != memaddr || len < (int) sizeof (int))
+ {
+ /* Need part of initial word -- fetch it. */
+ buffer[0] = nindy_fetch_word (addr);
+ }
if (count > 1) /* FIXME, avoid if even boundary */
{
/* insert_step_breakpoint (); FIXME, do we need this? */
/* Let 'er rip... */
- proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0);
}
static void
-reset_command(args, from_tty)
+reset_command (args, from_tty)
char *args;
int from_tty;
{
if (nindy_serial == NULL)
{
- error( "No target system to reset -- use 'target nindy' command.");
+ error ("No target system to reset -- use 'target nindy' command.");
}
- if ( query("Really reset the target system?",0,0) )
+ if (query ("Really reset the target system?", 0, 0))
{
SERIAL_SEND_BREAK (nindy_serial);
tty_flush (nindy_serial);
char *args;
int from_tty;
{
- return; /* Ignore attempts to kill target system */
+ return; /* Ignore attempts to kill target system */
}
/* Clean up when a program exits.
}
static void
-nindy_load( filename, from_tty )
- char *filename;
- int from_tty;
+nindy_load (filename, from_tty)
+ char *filename;
+ int from_tty;
{
asection *s;
/* Can't do unix style forking on a VMS system, so we'll use bfd to do
all the work for us
- */
+ */
- bfd *file = bfd_openr(filename,0);
+ bfd *file = bfd_openr (filename, 0);
if (!file)
- {
- perror_with_name(filename);
- return;
- }
-
- if (!bfd_check_format(file, bfd_object))
- {
- error("can't prove it's an object file\n");
- return;
- }
-
- for ( s = file->sections; s; s=s->next)
- {
- if (s->flags & SEC_LOAD)
{
- char *buffer = xmalloc(s->_raw_size);
- bfd_get_section_contents(file, s, buffer, 0, s->_raw_size);
- printf("Loading section %s, size %x vma %x\n",
- s->name,
- s->_raw_size,
- s->vma);
- ninMemPut(s->vma, buffer, s->_raw_size);
- free(buffer);
+ perror_with_name (filename);
+ return;
}
- }
- bfd_close(file);
+
+ if (!bfd_check_format (file, bfd_object))
+ {
+ error ("can't prove it's an object file\n");
+ return;
+ }
+
+ for (s = file->sections; s; s = s->next)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ char *buffer = xmalloc (s->_raw_size);
+ bfd_get_section_contents (file, s, buffer, 0, s->_raw_size);
+ printf ("Loading section %s, size %x vma %x\n",
+ s->name,
+ s->_raw_size,
+ s->vma);
+ ninMemPut (s->vma, buffer, s->_raw_size);
+ free (buffer);
+ }
+ }
+ bfd_close (file);
}
static int
char ttyname[100];
char *p, *p2;
- while (target_stack->target_ops != &nindy_ops) /* What is this crap??? */
+ while (target_stack->target_ops != &nindy_ops) /* What is this crap??? */
{ /* remote tty not specified yet */
- if ( instream == stdin ){
- printf_unfiltered("\nAttach /dev/ttyNN -- specify NN, or \"quit\" to quit: ");
- gdb_flush( gdb_stdout );
+ if (instream == stdin)
+ {
+ printf_unfiltered ("\nAttach /dev/ttyNN -- specify NN, or \"quit\" to quit: ");
+ gdb_flush (gdb_stdout);
}
- fgets( ttyname, sizeof(ttyname)-1, stdin );
+ fgets (ttyname, sizeof (ttyname) - 1, stdin);
- /* Strip leading and trailing whitespace */
- for ( p = ttyname; isspace(*p); p++ ){
- ;
+ /* Strip leading and trailing whitespace */
+ for (p = ttyname; isspace (*p); p++)
+ {
+ ;
}
- if ( *p == '\0' ){
- return; /* User just hit spaces or return, wants out */
+ if (*p == '\0')
+ {
+ return; /* User just hit spaces or return, wants out */
}
- for ( p2= p; !isspace(*p2) && (*p2 != '\0'); p2++ ){
- ;
+ for (p2 = p; !isspace (*p2) && (*p2 != '\0'); p2++)
+ {
+ ;
}
- *p2= '\0';
- if ( STREQ("quit",p) ){
- exit(1);
+ *p2 = '\0';
+ if (STREQ ("quit", p))
+ {
+ exit (1);
}
- if (catch_errors (nindy_open_stub, p, "", RETURN_MASK_ALL))
- {
- /* Now that we have a tty open for talking to the remote machine,
- download the executable file if one was specified. */
- if (exec_bfd)
- {
- catch_errors (load_stub, bfd_get_filename (exec_bfd), "",
- RETURN_MASK_ALL);
- }
- }
- }
+ if (catch_errors (nindy_open_stub, p, "", RETURN_MASK_ALL))
+ {
+ /* Now that we have a tty open for talking to the remote machine,
+ download the executable file if one was specified. */
+ if (exec_bfd)
+ {
+ catch_errors (load_stub, bfd_get_filename (exec_bfd), "",
+ RETURN_MASK_ALL);
+ }
+ }
+ }
}
\f
/* Define the target subroutine names */
-struct target_ops nindy_ops ;
+struct target_ops nindy_ops;
-static void
-init_nindy_ops(void)
+static void
+init_nindy_ops (void)
{
- nindy_ops.to_shortname = "nindy"; "Remote serial target in i960 NINDY-specific protocol",
- nindy_ops.to_longname = "Use a remote i960 system running NINDY connected by a serial line.\n\
+ nindy_ops.to_shortname = "nindy";
+ "Remote serial target in i960 NINDY-specific protocol",
+ nindy_ops.to_longname = "Use a remote i960 system running NINDY connected by a serial line.\n\
Specify the name of the device the serial line is connected to.\n\
The speed (baud rate), whether to use the old NINDY protocol,\n\
and whether to send a break on startup, are controlled by options\n\
-specified when you started GDB." ;
- nindy_ops.to_doc = "";
- nindy_ops.to_open = nindy_open;
- nindy_ops.to_close = nindy_close;
- nindy_ops.to_attach = 0;
+specified when you started GDB.";
+ nindy_ops.to_doc = "";
+ nindy_ops.to_open = nindy_open;
+ nindy_ops.to_close = nindy_close;
+ nindy_ops.to_attach = 0;
nindy_ops.to_post_attach = NULL;
nindy_ops.to_require_attach = NULL;
- nindy_ops.to_detach = nindy_detach;
+ nindy_ops.to_detach = nindy_detach;
nindy_ops.to_require_detach = NULL;
- nindy_ops.to_resume = nindy_resume;
- nindy_ops.to_wait = nindy_wait;
+ nindy_ops.to_resume = nindy_resume;
+ nindy_ops.to_wait = nindy_wait;
nindy_ops.to_post_wait = NULL;
- nindy_ops.to_fetch_registers = nindy_fetch_registers;
- nindy_ops.to_store_registers = nindy_store_registers;
- nindy_ops.to_prepare_to_store = nindy_prepare_to_store;
- nindy_ops.to_xfer_memory = nindy_xfer_inferior_memory;
- nindy_ops.to_files_info = nindy_files_info;
- nindy_ops.to_insert_breakpoint = memory_insert_breakpoint;
- nindy_ops.to_remove_breakpoint = memory_remove_breakpoint;
- nindy_ops.to_terminal_init = 0;
- nindy_ops.to_terminal_inferior = 0;
- nindy_ops.to_terminal_ours_for_output = 0;
- nindy_ops.to_terminal_ours = 0;
- nindy_ops.to_terminal_info = 0; /* Terminal crud */
- nindy_ops.to_kill = nindy_kill;
- nindy_ops.to_load = nindy_load;
- nindy_ops.to_lookup_symbol = 0; /* lookup_symbol */
- nindy_ops.to_create_inferior = nindy_create_inferior;
+ nindy_ops.to_fetch_registers = nindy_fetch_registers;
+ nindy_ops.to_store_registers = nindy_store_registers;
+ nindy_ops.to_prepare_to_store = nindy_prepare_to_store;
+ nindy_ops.to_xfer_memory = nindy_xfer_inferior_memory;
+ nindy_ops.to_files_info = nindy_files_info;
+ nindy_ops.to_insert_breakpoint = memory_insert_breakpoint;
+ nindy_ops.to_remove_breakpoint = memory_remove_breakpoint;
+ nindy_ops.to_terminal_init = 0;
+ nindy_ops.to_terminal_inferior = 0;
+ nindy_ops.to_terminal_ours_for_output = 0;
+ nindy_ops.to_terminal_ours = 0;
+ nindy_ops.to_terminal_info = 0; /* Terminal crud */
+ nindy_ops.to_kill = nindy_kill;
+ nindy_ops.to_load = nindy_load;
+ nindy_ops.to_lookup_symbol = 0; /* lookup_symbol */
+ nindy_ops.to_create_inferior = nindy_create_inferior;
nindy_ops.to_post_startup_inferior = NULL;
nindy_ops.to_acknowledge_created_inferior = NULL;
nindy_ops.to_clone_and_follow_inferior = NULL;
nindy_ops.to_has_execd = NULL;
nindy_ops.to_reported_exec_events_per_exec_call = NULL;
nindy_ops.to_has_exited = NULL;
- nindy_ops.to_mourn_inferior = nindy_mourn_inferior;
- nindy_ops.to_can_run = 0; /* can_run */
- nindy_ops.to_notice_signals = 0; /* notice_signals */
- nindy_ops.to_thread_alive = 0; /* to_thread_alive */
- nindy_ops.to_stop = 0; /* to_stop */
+ nindy_ops.to_mourn_inferior = nindy_mourn_inferior;
+ nindy_ops.to_can_run = 0; /* can_run */
+ nindy_ops.to_notice_signals = 0; /* notice_signals */
+ nindy_ops.to_thread_alive = 0; /* to_thread_alive */
+ nindy_ops.to_stop = 0; /* to_stop */
nindy_ops.to_pid_to_exec_file = NULL;
nindy_ops.to_core_file_to_sym_file = NULL;
- nindy_ops.to_stratum = process_stratum;
- nindy_ops.DONT_USE = 0; /* next */
- nindy_ops.to_has_all_memory = 1;
- nindy_ops.to_has_memory = 1;
- nindy_ops.to_has_stack = 1;
- nindy_ops.to_has_registers = 1;
- nindy_ops.to_has_execution = 1; /* all mem, mem, stack, regs, exec */
- nindy_ops.to_sections = 0;
- nindy_ops.to_sections_end = 0; /* Section pointers */
- nindy_ops.to_magic = OPS_MAGIC; /* Always the last thing */
+ nindy_ops.to_stratum = process_stratum;
+ nindy_ops.DONT_USE = 0; /* next */
+ nindy_ops.to_has_all_memory = 1;
+ nindy_ops.to_has_memory = 1;
+ nindy_ops.to_has_stack = 1;
+ nindy_ops.to_has_registers = 1;
+ nindy_ops.to_has_execution = 1; /* all mem, mem, stack, regs, exec */
+ nindy_ops.to_sections = 0;
+ nindy_ops.to_sections_end = 0; /* Section pointers */
+ nindy_ops.to_magic = OPS_MAGIC; /* Always the last thing */
}
void
_initialize_nindy ()
{
- init_nindy_ops() ;
+ init_nindy_ops ();
add_target (&nindy_ops);
add_com ("reset", class_obscure, reset_command,
"Send a 'break' to the remote target system.\n\
projects / thirdparty / binutils-gdb.git / blobdiff