/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright 1990, 1991 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998
+ Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
-GDB is free software; you can redistribute it and/or modify
+This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-GDB is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#include <stdio.h>
#include "defs.h"
#include "symtab.h"
-#include "param.h"
+#include "gdbtypes.h"
#include "gdbcore.h"
#include "frame.h"
#include "target.h"
#include "value.h"
#include "symfile.h"
+#include "objfiles.h"
#include "gdbcmd.h"
#include "breakpoint.h"
+#include "language.h"
+#include "complaints.h"
+#include "demangle.h"
+#include "inferior.h" /* for write_pc */
+#include "gdb-stabs.h"
+#include "obstack.h"
-#include <obstack.h>
#include <assert.h>
-
#include <sys/types.h>
#include <fcntl.h>
-#include <string.h>
-#include <sys/stat.h>
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+#include <time.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+#ifdef HPUXHPPA
+extern int hpread_pxdb_check PARAMS ((bfd *, char *));
+
+/* Some HP-UX related globals to clear when a new "main"
+ symbol file is loaded. HP-specific. */
+
+extern int hp_som_som_object_present;
+extern int hp_cxx_exception_support_initialized;
+#define RESET_HP_UX_GLOBALS() do {\
+ hp_som_som_object_present = 0; /* indicates HP-compiled code */ \
+ hp_cxx_exception_support_initialized = 0; /* must reinitialize exception stuff */ \
+ } while (0)
+#endif
+
+int (*ui_load_progress_hook) PARAMS ((char *, unsigned long));
+void (*pre_add_symbol_hook) PARAMS ((char *));
+void (*post_add_symbol_hook) PARAMS ((void));
+
+/* Global variables owned by this file */
+int readnow_symbol_files; /* Read full symbols immediately */
+
+struct complaint oldsyms_complaint = {
+ "Replacing old symbols for `%s'", 0, 0
+};
+
+struct complaint empty_symtab_complaint = {
+ "Empty symbol table found for `%s'", 0, 0
+};
+
+/* External variables and functions referenced. */
extern int info_verbose;
-extern void qsort ();
-extern char *getenv ();
+extern void report_transfer_performance PARAMS ((unsigned long,
+ time_t, time_t));
/* Functions this file defines */
-static bfd *symfile_open();
-static struct sym_fns *symfile_init();
-static void clear_symtab_users_once();
-/* List of all available sym_fns. */
+#if 0
+static int simple_read_overlay_region_table PARAMS ((void));
+static void simple_free_overlay_region_table PARAMS ((void));
+#endif
-struct sym_fns *symtab_fns = NULL;
+static void set_initial_language PARAMS ((void));
-/* Saves the sym_fns of the current symbol table, so we can call
- the right sym_discard function when we free it. */
+static void load_command PARAMS ((char *, int));
-static struct sym_fns *symfile_fns;
+static void add_symbol_file_command PARAMS ((char *, int));
-/* Allocate an obstack to hold objects that should be freed
- when we load a new symbol table.
- This includes the symbols made by dbxread
- and the types that are not permanent. */
+static void add_shared_symbol_files_command PARAMS ((char *, int));
-struct obstack obstack1;
+static void cashier_psymtab PARAMS ((struct partial_symtab *));
-struct obstack *symbol_obstack = &obstack1;
+static int compare_psymbols PARAMS ((const void *, const void *));
-/* This obstack will be used for partial_symbol objects. It can
- probably actually be the same as the symbol_obstack above, but I'd
- like to keep them seperate for now. If I want to later, I'll
- replace one with the other. */
+static int compare_symbols PARAMS ((const void *, const void *));
-struct obstack obstack2;
+bfd *symfile_bfd_open PARAMS ((char *));
-struct obstack *psymbol_obstack = &obstack2;
+static void find_sym_fns PARAMS ((struct objfile *));
-/* File name symbols were loaded from. */
+static void decrement_reading_symtab PARAMS ((void *));
-char *symfile = 0;
+static void overlay_invalidate_all PARAMS ((void));
-/* The modification date of the file when they were loaded. */
+static int overlay_is_mapped PARAMS ((struct obj_section *));
-long /* really time_t */ symfile_mtime = 0;
+void list_overlays_command PARAMS ((char *, int));
-/* Structures with which to manage partial symbol allocation. */
+void map_overlay_command PARAMS ((char *, int));
-struct psymbol_allocation_list global_psymbols = {0}, static_psymbols = {0};
+void unmap_overlay_command PARAMS ((char *, int));
-/* Structure to manage complaints about symbol file contents. */
+static void overlay_auto_command PARAMS ((char *, int));
-struct complaint complaint_root[1] = {
- {(char *)0, 0, complaint_root},
-};
+static void overlay_manual_command PARAMS ((char *, int));
-/* Some actual complaints. */
+static void overlay_off_command PARAMS ((char *, int));
-struct complaint oldsyms_complaint = {
- "Replacing old symbols for `%s'", 0, 0 };
+static void overlay_load_command PARAMS ((char *, int));
-struct complaint empty_symtab_complaint = {
- "Empty symbol table found for `%s'", 0, 0 };
+static void overlay_command PARAMS ((char *, int));
+
+static void simple_free_overlay_table PARAMS ((void));
+
+static void read_target_long_array PARAMS ((CORE_ADDR, unsigned int *, int));
+
+static int simple_read_overlay_table PARAMS ((void));
+
+static int simple_overlay_update_1 PARAMS ((struct obj_section *));
+
+void _initialize_symfile PARAMS ((void));
+
+/* List of all available sym_fns. On gdb startup, each object file reader
+ calls add_symtab_fns() to register information on each format it is
+ prepared to read. */
+
+static struct sym_fns *symtab_fns = NULL;
+
+/* Flag for whether user will be reloading symbols multiple times.
+ Defaults to ON for VxWorks, otherwise OFF. */
+
+#ifdef SYMBOL_RELOADING_DEFAULT
+int symbol_reloading = SYMBOL_RELOADING_DEFAULT;
+#else
+int symbol_reloading = 0;
+#endif
+
+/* If non-zero, then on HP-UX (i.e., platforms that use somsolib.c),
+ this variable is interpreted as a threshhold. If adding a new
+ library's symbol table to those already known to the debugger would
+ exceed this threshhold, then the shlib's symbols are not added.
+
+ If non-zero on other platforms, shared library symbols will be added
+ automatically when the inferior is created, new libraries are loaded,
+ or when attaching to the inferior. This is almost always what users
+ will want to have happen; but for very large programs, the startup
+ time will be excessive, and so if this is a problem, the user can
+ clear this flag and then add the shared library symbols as needed.
+ Note that there is a potential for confusion, since if the shared
+ library symbols are not loaded, commands like "info fun" will *not*
+ report all the functions that are actually present.
+
+ Note that HP-UX interprets this variable to mean, "threshhold size
+ in megabytes, where zero means never add". Other platforms interpret
+ this variable to mean, "always add if non-zero, never add if zero."
+ */
+
+int auto_solib_add = 1;
\f
-/* In the following sort, we always make sure that
- register debug symbol declarations always come before regular
- debug symbol declarations (as might happen when parameters are
- then put into registers by the compiler). */
+/* Since this function is called from within qsort, in an ANSI environment
+ it must conform to the prototype for qsort, which specifies that the
+ comparison function takes two "void *" pointers. */
+
+static int
+compare_symbols (s1p, s2p)
+ const PTR s1p;
+ const PTR s2p;
+{
+ register struct symbol **s1, **s2;
+
+ s1 = (struct symbol **) s1p;
+ s2 = (struct symbol **) s2p;
+
+ return (STRCMP (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2)));
+}
+
+/*
+
+LOCAL FUNCTION
+
+ compare_psymbols -- compare two partial symbols by name
+
+DESCRIPTION
+
+ Given pointers to pointers to two partial symbol table entries,
+ compare them by name and return -N, 0, or +N (ala strcmp).
+ Typically used by sorting routines like qsort().
+
+NOTES
+
+ Does direct compare of first two characters before punting
+ and passing to strcmp for longer compares. Note that the
+ original version had a bug whereby two null strings or two
+ identically named one character strings would return the
+ comparison of memory following the null byte.
+
+ */
static int
-compare_symbols (s1, s2)
- struct symbol **s1, **s2;
+compare_psymbols (s1p, s2p)
+ const PTR s1p;
+ const PTR s2p;
{
- register int namediff;
+ register char *st1 = SYMBOL_NAME (*(struct partial_symbol **) s1p);
+ register char *st2 = SYMBOL_NAME (*(struct partial_symbol **) s2p);
- /* Compare the initial characters. */
- namediff = SYMBOL_NAME (*s1)[0] - SYMBOL_NAME (*s2)[0];
- if (namediff != 0) return namediff;
+ if ((st1[0] - st2[0]) || !st1[0])
+ {
+ return (st1[0] - st2[0]);
+ }
+ else if ((st1[1] - st2[1]) || !st1[1])
+ {
+ return (st1[1] - st2[1]);
+ }
+ else
+ {
+ /* Note: I replaced the STRCMP line (commented out below)
+ * with a simpler "strcmp()" which compares the 2 strings
+ * from the beginning. (STRCMP is a macro which first compares
+ * the initial characters, then falls back on strcmp).
+ * The reason is that the STRCMP line was tickling a C compiler
+ * bug on HP-UX 10.30, which is avoided with the simpler
+ * code. The performance gain from the more complicated code
+ * is negligible, given that we have already checked the
+ * initial 2 characters above. I reported the compiler bug,
+ * and once it is fixed the original line can be put back. RT
+ */
+ /* return ( STRCMP (st1 + 2, st2 + 2)); */
+ return ( strcmp (st1, st2));
+ }
+}
- /* If they match, compare the rest of the names. */
- namediff = strcmp (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2));
- if (namediff != 0) return namediff;
+void
+sort_pst_symbols (pst)
+ struct partial_symtab *pst;
+{
+ /* Sort the global list; don't sort the static list */
- /* For symbols of the same name, registers should come first. */
- return ((SYMBOL_CLASS (*s2) == LOC_REGISTER)
- - (SYMBOL_CLASS (*s1) == LOC_REGISTER));
+ qsort (pst -> objfile -> global_psymbols.list + pst -> globals_offset,
+ pst -> n_global_syms, sizeof (struct partial_symbol *),
+ compare_psymbols);
}
/* Call sort_block_syms to sort alphabetically the symbols of one block. */
sort_symtab_syms (s)
register struct symtab *s;
{
- register struct blockvector *bv = BLOCKVECTOR (s);
- int nbl = BLOCKVECTOR_NBLOCKS (bv);
+ register struct blockvector *bv;
+ int nbl;
int i;
register struct block *b;
+ if (s == 0)
+ return;
+ bv = BLOCKVECTOR (s);
+ nbl = BLOCKVECTOR_NBLOCKS (bv);
for (i = 0; i < nbl; i++)
{
b = BLOCKVECTOR_BLOCK (bv, i);
}
}
-void
-sort_all_symtab_syms ()
-{
- register struct symtab *s;
-
- for (s = symtab_list; s; s = s->next)
- {
- sort_symtab_syms (s);
- }
-}
-
-/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
- (and add a null character at the end in the copy).
- Returns the address of the copy. */
+/* Make a null terminated copy of the string at PTR with SIZE characters in
+ the obstack pointed to by OBSTACKP . Returns the address of the copy.
+ Note that the string at PTR does not have to be null terminated, I.E. it
+ may be part of a larger string and we are only saving a substring. */
char *
-obsavestring (ptr, size)
+obsavestring (ptr, size, obstackp)
char *ptr;
int size;
+ struct obstack *obstackp;
{
- register char *p = (char *) obstack_alloc (symbol_obstack, size + 1);
- /* Open-coded bcopy--saves function call time.
- These strings are usually short. */
+ register char *p = (char *) obstack_alloc (obstackp, size + 1);
+ /* Open-coded memcpy--saves function call time. These strings are usually
+ short. FIXME: Is this really still true with a compiler that can
+ inline memcpy? */
{
register char *p1 = ptr;
register char *p2 = p;
return p;
}
-/* Concatenate strings S1, S2 and S3; return the new string.
- Space is found in the symbol_obstack. */
+/* Concatenate strings S1, S2 and S3; return the new string. Space is found
+ in the obstack pointed to by OBSTACKP. */
char *
-obconcat (s1, s2, s3)
- char *s1, *s2, *s3;
+obconcat (obstackp, s1, s2, s3)
+ struct obstack *obstackp;
+ const char *s1, *s2, *s3;
{
register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
- register char *val = (char *) obstack_alloc (symbol_obstack, len);
+ register char *val = (char *) obstack_alloc (obstackp, len);
strcpy (val, s1);
strcat (val, s2);
strcat (val, s3);
return val;
}
-\f
-/* Accumulate the misc functions in bunches of 127.
- At the end, copy them all into one newly allocated structure. */
-
-#define MISC_BUNCH_SIZE 127
-struct misc_bunch
-{
- struct misc_bunch *next;
- struct misc_function contents[MISC_BUNCH_SIZE];
-};
-
-/* Bunch currently being filled up.
- The next field points to chain of filled bunches. */
-
-static struct misc_bunch *misc_bunch;
+/* True if we are nested inside psymtab_to_symtab. */
-/* Number of slots filled in current bunch. */
+int currently_reading_symtab = 0;
-static int misc_bunch_index;
-
-/* Total number of misc functions recorded so far. */
-
-static int misc_count;
-
-void
-init_misc_bunches ()
+static void
+decrement_reading_symtab (dummy)
+ void *dummy;
{
- misc_count = 0;
- misc_bunch = 0;
- misc_bunch_index = MISC_BUNCH_SIZE;
+ currently_reading_symtab--;
}
-void
-prim_record_misc_function (name, address, misc_type)
- char *name;
- CORE_ADDR address;
- enum misc_function_type misc_type;
+/* Get the symbol table that corresponds to a partial_symtab.
+ This is fast after the first time you do it. In fact, there
+ is an even faster macro PSYMTAB_TO_SYMTAB that does the fast
+ case inline. */
+
+struct symtab *
+psymtab_to_symtab (pst)
+ register struct partial_symtab *pst;
{
- register struct misc_bunch *new;
+ /* If it's been looked up before, return it. */
+ if (pst->symtab)
+ return pst->symtab;
- if (misc_bunch_index == MISC_BUNCH_SIZE)
- {
- new = (struct misc_bunch *) xmalloc (sizeof (struct misc_bunch));
- misc_bunch_index = 0;
- new->next = misc_bunch;
- misc_bunch = new;
+ /* If it has not yet been read in, read it. */
+ if (!pst->readin)
+ {
+ struct cleanup *back_to = make_cleanup (decrement_reading_symtab, NULL);
+ currently_reading_symtab++;
+ (*pst->read_symtab) (pst);
+ do_cleanups (back_to);
}
- misc_bunch->contents[misc_bunch_index].name = name;
- misc_bunch->contents[misc_bunch_index].address = address;
- misc_bunch->contents[misc_bunch_index].type = misc_type;
- misc_bunch->contents[misc_bunch_index].misc_info = 0;
- misc_bunch_index++;
- misc_count++;
-}
-static int
-compare_misc_functions (fn1, fn2)
- struct misc_function *fn1, *fn2;
-{
- /* Return a signed result based on unsigned comparisons
- so that we sort into unsigned numeric order. */
- if (fn1->address < fn2->address)
- return -1;
- if (fn1->address > fn2->address)
- return 1;
- return 0;
+ return pst->symtab;
}
-/* ARGSUSED */
-void
-discard_misc_bunches (foo)
- int foo;
-{
- register struct misc_bunch *next;
-
- while (misc_bunch)
- {
- next = misc_bunch->next;
- free (misc_bunch);
- misc_bunch = next;
- }
-}
+/* Initialize entry point information for this objfile. */
-/* INCLINK nonzero means bunches are from an incrementally-linked file.
- Add them to the existing bunches.
- Otherwise INCLINK is zero, and we start from scratch. */
void
-condense_misc_bunches (inclink)
- int inclink;
+init_entry_point_info (objfile)
+ struct objfile *objfile;
{
- register int i, j;
- register struct misc_bunch *bunch;
+ /* Save startup file's range of PC addresses to help blockframe.c
+ decide where the bottom of the stack is. */
- if (inclink)
+ if (bfd_get_file_flags (objfile -> obfd) & EXEC_P)
{
- misc_function_vector
- = (struct misc_function *)
- xrealloc (misc_function_vector, (misc_count + misc_function_count)
- * sizeof (struct misc_function));
- j = misc_function_count;
+ /* Executable file -- record its entry point so we'll recognize
+ the startup file because it contains the entry point. */
+ objfile -> ei.entry_point = bfd_get_start_address (objfile -> obfd);
}
else
{
- misc_function_vector
- = (struct misc_function *)
- xmalloc (misc_count * sizeof (struct misc_function));
- j = 0;
- }
-
- bunch = misc_bunch;
- while (bunch)
- {
- for (i = 0; i < misc_bunch_index; i++, j++)
- {
- misc_function_vector[j] = bunch->contents[i];
-#ifdef NAMES_HAVE_UNDERSCORE
- if (misc_function_vector[j].name[0] == '_')
- misc_function_vector[j].name++;
-#endif
- }
- bunch = bunch->next;
- misc_bunch_index = MISC_BUNCH_SIZE;
+ /* Examination of non-executable.o files. Short-circuit this stuff. */
+ objfile -> ei.entry_point = INVALID_ENTRY_POINT;
}
+ objfile -> ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
+ objfile -> ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
+ objfile -> ei.entry_func_lowpc = INVALID_ENTRY_LOWPC;
+ objfile -> ei.entry_func_highpc = INVALID_ENTRY_HIGHPC;
+ objfile -> ei.main_func_lowpc = INVALID_ENTRY_LOWPC;
+ objfile -> ei.main_func_highpc = INVALID_ENTRY_HIGHPC;
+}
- if (misc_function_count + misc_count != j) /* DEBUG */
- printf_filtered ("Function counts are off! %d + %d != %d\n",
- misc_function_count, misc_count, j);
-
- misc_function_count = j;
-
- /* Sort the misc functions by address. */
+/* Get current entry point address. */
- qsort (misc_function_vector, misc_function_count,
- sizeof (struct misc_function),
- compare_misc_functions);
+CORE_ADDR
+entry_point_address()
+{
+ return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
}
+/* Remember the lowest-addressed loadable section we've seen.
+ This function is called via bfd_map_over_sections.
-/* Get the symbol table that corresponds to a partial_symtab.
- This is fast after the first time you do it. In fact, there
- is an even faster macro PSYMTAB_TO_SYMTAB that does the fast
- case inline. */
+ In case of equal vmas, the section with the largest size becomes the
+ lowest-addressed loadable section.
-struct symtab *
-psymtab_to_symtab (pst)
- register struct partial_symtab *pst;
+ If the vmas and sizes are equal, the last section is considered the
+ lowest-addressed loadable section. */
+
+void
+find_lowest_section (abfd, sect, obj)
+ bfd *abfd;
+ asection *sect;
+ PTR obj;
{
- register struct symtab *result;
+ asection **lowest = (asection **)obj;
- /* If it's been looked up before, return it. */
- if (pst->symtab)
- return pst->symtab;
+ if (0 == (bfd_get_section_flags (abfd, sect) & SEC_LOAD))
+ return;
+ if (!*lowest)
+ *lowest = sect; /* First loadable section */
+ else if (bfd_section_vma (abfd, *lowest) > bfd_section_vma (abfd, sect))
+ *lowest = sect; /* A lower loadable section */
+ else if (bfd_section_vma (abfd, *lowest) == bfd_section_vma (abfd, sect)
+ && (bfd_section_size (abfd, (*lowest))
+ <= bfd_section_size (abfd, sect)))
+ *lowest = sect;
+}
- /* If it has not yet been read in, read it. */
- if (!pst->readin)
- {
- (*pst->read_symtab) (pst);
- }
+/* Parse the user's idea of an offset for dynamic linking, into our idea
+ of how to represent it for fast symbol reading. This is the default
+ version of the sym_fns.sym_offsets function for symbol readers that
+ don't need to do anything special. It allocates a section_offsets table
+ for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
- /* Search through list for correct name. */
- for (result = symtab_list; result; result = result->next)
- if (!strcmp (result->filename, pst->filename))
- {
- pst->symtab = result; /* Remember where it was. */
- return result;
- }
+struct section_offsets *
+default_symfile_offsets (objfile, addr)
+ struct objfile *objfile;
+ CORE_ADDR addr;
+{
+ struct section_offsets *section_offsets;
+ int i;
- return 0;
+ objfile->num_sections = SECT_OFF_MAX;
+ section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile -> psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+
+ for (i = 0; i < SECT_OFF_MAX; i++)
+ ANOFFSET (section_offsets, i) = addr;
+
+ return section_offsets;
}
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
FROM_TTY says how verbose to be. MAINLINE specifies whether this
is the main symbol file, or whether it's an extra symbol file such
as dynamically loaded code. If !mainline, ADDR is the address
- where the text segment was loaded. */
+ where the text segment was loaded. If VERBO, the caller has printed
+ a verbose message about the symbol reading (and complaints can be
+ more terse about it). */
void
-symbol_file_add (name, from_tty, addr, mainline)
- char *name;
- int from_tty;
+syms_from_objfile (objfile, addr, mainline, verbo)
+ struct objfile *objfile;
CORE_ADDR addr;
int mainline;
+ int verbo;
{
- bfd *sym_bfd;
- asection *text_sect;
- struct sym_fns *sf;
- char *realname;
+ struct section_offsets *section_offsets;
+ asection *lowest_sect;
+ struct cleanup *old_chain;
- sym_bfd = symfile_open (name);
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
- entry_point = bfd_get_start_address (sym_bfd);
+ /* Make sure that partially constructed symbol tables will be cleaned up
+ if an error occurs during symbol reading. */
+ old_chain = make_cleanup ((make_cleanup_func) free_objfile, objfile);
- if (mainline)
- symfile_mtime = bfd_get_mtime (sym_bfd);
+ if (mainline)
+ {
+ /* We will modify the main symbol table, make sure that all its users
+ will be cleaned up if an error occurs during symbol reading. */
+ make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+ /* Since no error yet, throw away the old symbol table. */
- /* There is a distinction between having no symbol table
- (we refuse to read the file, leaving the old set of symbols around)
- and having no debugging symbols in your symbol table (we read
- the file and end up with a mostly empty symbol table). */
+ if (symfile_objfile != NULL)
+ {
+ free_objfile (symfile_objfile);
+ symfile_objfile = NULL;
+ }
- if (!(bfd_get_file_flags (sym_bfd) & HAS_SYMS))
- {
- error ("%s has no symbol-table", name);
+ /* Currently we keep symbols from the add-symbol-file command.
+ If the user wants to get rid of them, they should do "symbol-file"
+ without arguments first. Not sure this is the best behavior
+ (PR 2207). */
+
+ (*objfile -> sf -> sym_new_init) (objfile);
}
- if ((symtab_list || partial_symtab_list)
- && mainline
- && from_tty
- && !query ("Load new symbol table from \"%s\"? ", name))
- error ("Not confirmed.");
+ /* Convert addr into an offset rather than an absolute address.
+ We find the lowest address of a loaded segment in the objfile,
+ and assume that <addr> is where that got loaded. Due to historical
+ precedent, we warn if that doesn't happen to be a text segment. */
- if (from_tty)
+ if (mainline)
{
- printf_filtered ("Reading symbol data from %s...", name);
- wrap_here ("");
- fflush (stdout);
+ addr = 0; /* No offset from objfile addresses. */
+ }
+ else
+ {
+ lowest_sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (lowest_sect == NULL)
+ bfd_map_over_sections (objfile->obfd, find_lowest_section,
+ (PTR) &lowest_sect);
+
+ if (lowest_sect == NULL)
+ warning ("no loadable sections found in added symbol-file %s",
+ objfile->name);
+ else if ((bfd_get_section_flags (objfile->obfd, lowest_sect) & SEC_CODE)
+ == 0)
+ /* FIXME-32x64--assumes bfd_vma fits in long. */
+ warning ("Lowest section in %s is %s at 0x%lx",
+ objfile->name,
+ bfd_section_name (objfile->obfd, lowest_sect),
+ (unsigned long) bfd_section_vma (objfile->obfd, lowest_sect));
+
+ if (lowest_sect)
+ addr -= bfd_section_vma (objfile->obfd, lowest_sect);
}
- sf = symfile_init (sym_bfd);
- realname = bfd_get_filename (sym_bfd);
- realname = savestring (realname, strlen (realname));
- /* FIXME, this probably creates a storage leak... */
+ /* Initialize symbol reading routines for this objfile, allow complaints to
+ appear for this new file, and record how verbose to be, then do the
+ initial symbol reading for this file. */
- if (mainline)
- {
- /* Since no error yet, throw away the old symbol table. */
+ (*objfile -> sf -> sym_init) (objfile);
+ clear_complaints (1, verbo);
+
+ section_offsets = (*objfile -> sf -> sym_offsets) (objfile, addr);
+ objfile->section_offsets = section_offsets;
+
+#ifndef IBM6000_TARGET
+ /* This is a SVR4/SunOS specific hack, I think. In any event, it
+ screws RS/6000. sym_offsets should be doing this sort of thing,
+ because it knows the mapping between bfd sections and
+ section_offsets. */
+ /* This is a hack. As far as I can tell, section offsets are not
+ target dependent. They are all set to addr with a couple of
+ exceptions. The exceptions are sysvr4 shared libraries, whose
+ offsets are kept in solib structures anyway and rs6000 xcoff
+ which handles shared libraries in a completely unique way.
+
+ Section offsets are built similarly, except that they are built
+ by adding addr in all cases because there is no clear mapping
+ from section_offsets into actual sections. Note that solib.c
+ has a different algorythm for finding section offsets.
- if (symfile)
- free (symfile);
- symfile = 0;
- free_all_symtabs ();
- free_all_psymtabs ();
+ These should probably all be collapsed into some target
+ independent form of shared library support. FIXME. */
- (*sf->sym_new_init) ();
+ if (addr)
+ {
+ struct obj_section *s;
- /* For mainline, caller didn't know the specified address of the
- text section. We fix that here. */
- text_sect = bfd_get_section_by_name (sym_bfd, ".text");
- addr = bfd_section_vma (sym_bfd, text_sect);
+ for (s = objfile->sections; s < objfile->sections_end; ++s)
+ {
+ s->addr -= s->offset;
+ s->addr += addr;
+ s->endaddr -= s->offset;
+ s->endaddr += addr;
+ s->offset += addr;
+ }
}
+#endif /* not IBM6000_TARGET */
- clear_complaints(); /* Allow complaints to appear for this new file. */
+ (*objfile -> sf -> sym_read) (objfile, section_offsets, mainline);
- (*sf->sym_read) (sf, addr, mainline);
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)...");
+ wrap_here ("");
+ }
- /* Don't allow char * to have a typename (else would get caddr_t.) */
- /* Ditto void *. FIXME should do this for all the builtin types. */
+ /* Don't allow char * to have a typename (else would get caddr_t).
+ Ditto void *. FIXME: Check whether this is now done by all the
+ symbol readers themselves (many of them now do), and if so remove
+ it from here. */
TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
- if (mainline)
- {
- /* OK, make it the "real" symbol file. */
- symfile = realname;
- symfile_fns = sf;
- }
+ /* Mark the objfile has having had initial symbol read attempted. Note
+ that this does not mean we found any symbols... */
- /* If we have wiped out any old symbol tables, clean up. */
- clear_symtab_users_once ();
+ objfile -> flags |= OBJF_SYMS;
- if (from_tty)
- {
- printf_filtered ("done.\n");
- fflush (stdout);
- }
-}
+ /* Discard cleanups as symbol reading was successful. */
+
+ discard_cleanups (old_chain);
+
+/* Call this after reading in a new symbol table to give target dependant code
+ a crack at the new symbols. For instance, this could be used to update the
+ values of target-specific symbols GDB needs to keep track of (such as
+ _sigtramp, or whatever). */
-/* This is the symbol-file command. Read the file, analyze its symbols,
- and add a struct symtab to symtab_list. */
+ TARGET_SYMFILE_POSTREAD (objfile);
+}
+/* Perform required actions after either reading in the initial
+ symbols for a new objfile, or mapping in the symbols from a reusable
+ objfile. */
+
void
-symbol_file_command (name, from_tty)
- char *name;
- int from_tty;
+new_symfile_objfile (objfile, mainline, verbo)
+ struct objfile *objfile;
+ int mainline;
+ int verbo;
{
- dont_repeat ();
+ /* If this is the main symbol file we have to clean up all users of the
+ old main symbol file. Otherwise it is sufficient to fixup all the
+ breakpoints that may have been redefined by this symbol file. */
+ if (mainline)
+ {
+ /* OK, make it the "real" symbol file. */
+ symfile_objfile = objfile;
- if (name == 0)
+ clear_symtab_users ();
+ }
+ else
{
- if ((symtab_list || partial_symtab_list)
- && from_tty
- && !query ("Discard symbol table from `%s'? ", symfile))
- error ("Not confirmed.");
- if (symfile)
- free (symfile);
- symfile = 0;
- free_all_symtabs ();
- free_all_psymtabs ();
- /* FIXME, this does not account for the main file and subsequent
- files (shared libs, dynloads, etc) having different formats.
- It only calls the cleanup routine for the main file's format. */
- if (symfile_fns) {
- (*symfile_fns->sym_new_init) ();
- free (symfile_fns);
- symfile_fns = 0;
- }
- return;
+ breakpoint_re_set ();
}
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
-
- symbol_file_add (name, from_tty, (CORE_ADDR)0, 1);
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, verbo);
}
-/* Open NAME and hand it off to BFD for preliminary analysis. Result
- is a BFD *, which includes a new copy of NAME dynamically allocated
- (which will be freed by the cleanup chain). In case of trouble,
- error() is called. */
+/* Process a symbol file, as either the main file or as a dynamically
+ loaded file.
-static bfd *
-symfile_open (name)
- char *name;
-{
- bfd *sym_bfd;
- int desc;
- char *absolute_name;
+ NAME is the file name (which will be tilde-expanded and made
+ absolute herein) (but we don't free or modify NAME itself).
+ FROM_TTY says how verbose to be. MAINLINE specifies whether this
+ is the main symbol file, or whether it's an extra symbol file such
+ as dynamically loaded code. If !mainline, ADDR is the address
+ where the text segment was loaded.
- name = tilde_expand (name);
- make_cleanup (free, name);
+ USER_LOADED is TRUE if the add-symbol-file command was how this
+ symbol file came to be processed.
- desc = openp (getenv ("PATH"), 1, name, O_RDONLY, 0, &absolute_name);
- if (desc < 0)
- perror_with_name (name);
- else
- {
- make_cleanup (free, absolute_name);
- name = absolute_name;
- }
+ IS_SOLIB is TRUE if this symbol file represents a solib, as discovered
+ by the target's implementation of the solib package.
- sym_bfd = bfd_fdopenr (name, NULL, desc);
- if (!sym_bfd)
- {
- close (desc);
- error ("Could not open `%s' to read symbols: %s",
- name, bfd_errmsg (bfd_error));
- }
- make_cleanup (bfd_close, sym_bfd);
+ Upon success, returns a pointer to the objfile that was added.
+ Upon failure, jumps back to command level (never returns). */
- if (!bfd_check_format (sym_bfd, bfd_object))
- error ("\"%s\": can't read symbols: %s.",
- name, bfd_errmsg (bfd_error));
+struct objfile *
+symbol_file_add (name, from_tty, addr, mainline, mapped, readnow, user_loaded, is_solib)
+ char *name;
+ int from_tty;
+ CORE_ADDR addr;
+ int mainline;
+ int mapped;
+ int readnow;
+ int user_loaded;
+ int is_solib;
+{
+ struct objfile *objfile;
+ struct partial_symtab *psymtab;
+ bfd *abfd;
- return sym_bfd;
-}
+ /* Open a bfd for the file, and give user a chance to burp if we'd be
+ interactively wiping out any existing symbols. */
-/* Link a new symtab_fns into the global symtab_fns list.
- Called by various _initialize routines. */
+ abfd = symfile_bfd_open (name);
-void
-add_symtab_fns (sf)
- struct sym_fns *sf;
+#if 0
+#ifdef GDB_TARGET_IS_HPPA
{
- sf->next = symtab_fns;
- symtab_fns = sf;
+ /********* TARGET SPECIFIC CODE (HACK!) **********
+ *
+ * The following code is HP-specific. The "right" way of
+ * doing this is unknown, but we bet would involve a target-
+ * specific pre-file-load check using a generic mechanism.
+ */
+ /* elz: I moved this code from inside the symfile_bfd_open function
+ this way we don't have to worry about recursion.
+ I also have taken out the call to pxdb from within the check
+ for pxdb processing. Seemed two logically unrelated things,
+ and I needed a pure checking later on anyway.
+ */
+
+ if( hpread_pxdb_needed( abfd ))
+ {
+ /*
+ * This file has not been pre-processed.
+ * Preprocess now
+ */
+
+ if (hpread_call_pxdb(name))
+ {
+ /* The
+ * call above has used "system" to pre-process
+ * the on-disk file, so we now need to close
+ * and re-open the file.
+ */
+ bfd_close (abfd); /* This also closes 'desc', */
+ /* hence the recursion. */
+ abfd = symfile_bfd_open( name );
+ }
+ else /* we fail miserably without pxdb!!!*/
+ /* the warning to the user has already been given
+ from within the call_pxdb function
+ */
+ error("Command ignored.\n");
+ }
}
+ /*************** END HACK ********************/
+#endif
+#endif /* 0 */
-/* Initialize to read symbols from the symbol file sym_bfd. It either
- returns or calls error(). The result is a malloc'd struct sym_fns
- that contains cached information about the symbol file. */
+ if ((have_full_symbols () || have_partial_symbols ())
+ && mainline
+ && from_tty
+ && !query ("Load new symbol table from \"%s\"? ", name))
+ error ("Not confirmed.");
-static struct sym_fns *
-symfile_init (sym_bfd)
- bfd *sym_bfd;
-{
- struct sym_fns *sf, *sf2;
+ objfile = allocate_objfile (abfd, mapped, user_loaded, is_solib);
+
+ /* If the objfile uses a mapped symbol file, and we have a psymtab for
+ it, then skip reading any symbols at this time. */
- for (sf = symtab_fns; sf != NULL; sf = sf->next)
+ if ((objfile -> flags & OBJF_MAPPED) && (objfile -> flags & OBJF_SYMS))
{
- if (!strncmp (bfd_get_target (sym_bfd), sf->sym_name, sf->sym_namelen))
+ /* We mapped in an existing symbol table file that already has had
+ initial symbol reading performed, so we can skip that part. Notify
+ the user that instead of reading the symbols, they have been mapped.
+ */
+ if (from_tty || info_verbose)
{
- sf2 = (struct sym_fns *)xmalloc (sizeof (*sf2));
- /* FIXME, who frees this? */
- *sf2 = *sf;
- sf2->sym_bfd = sym_bfd;
- sf2->sym_private = 0; /* Not alloc'd yet */
- (*sf2->sym_init) (sf2);
- return sf2;
+ printf_filtered ("Mapped symbols for %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
}
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
}
- error ("I'm sorry, Dave, I can't do that. Symbol format unknown.");
- return 0; /* Appease lint. */
-}
-\f
-/* This function runs the load command of our current target. */
+ else
+ {
+ /* We either created a new mapped symbol table, mapped an existing
+ symbol table file which has not had initial symbol reading
+ performed, or need to read an unmapped symbol table. */
+ if (from_tty || info_verbose)
+ {
+ if (pre_add_symbol_hook)
+ pre_add_symbol_hook (name);
+ else
+ {
+ printf_filtered ("Reading symbols from %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+ }
+ syms_from_objfile (objfile, addr, mainline, from_tty);
+ }
+
+ /* We now have at least a partial symbol table. Check to see if the
+ user requested that all symbols be read on initial access via either
+ the gdb startup command line or on a per symbol file basis. Expand
+ all partial symbol tables for this objfile if so. */
+
+ if (readnow || readnow_symbol_files)
+ {
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("expanding to full symbols...");
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+
+ for (psymtab = objfile -> psymtabs;
+ psymtab != NULL;
+ psymtab = psymtab -> next)
+ {
+ psymtab_to_symtab (psymtab);
+ }
+ }
+
+ if (from_tty || info_verbose)
+ {
+ if (post_add_symbol_hook)
+ post_add_symbol_hook ();
+ else
+ {
+ printf_filtered ("done.\n");
+ gdb_flush (gdb_stdout);
+ }
+ }
+
+ new_symfile_objfile (objfile, mainline, from_tty);
+
+ target_new_objfile (objfile);
+
+ return (objfile);
+}
+
+/* This is the symbol-file command. Read the file, analyze its
+ symbols, and add a struct symtab to a symtab list. The syntax of
+ the command is rather bizarre--(1) buildargv implements various
+ quoting conventions which are undocumented and have little or
+ nothing in common with the way things are quoted (or not quoted)
+ elsewhere in GDB, (2) options are used, which are not generally
+ used in GDB (perhaps "set mapped on", "set readnow on" would be
+ better), (3) the order of options matters, which is contrary to GNU
+ conventions (because it is confusing and inconvenient). */
+
+void
+symbol_file_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char **argv;
+ char *name = NULL;
+ CORE_ADDR text_relocation = 0; /* text_relocation */
+ struct cleanup *cleanups;
+ int mapped = 0;
+ int readnow = 0;
+
+ dont_repeat ();
+
+ if (args == NULL)
+ {
+ if ((have_full_symbols () || have_partial_symbols ())
+ && from_tty
+ && !query ("Discard symbol table from `%s'? ",
+ symfile_objfile -> name))
+ error ("Not confirmed.");
+ free_all_objfiles ();
+
+ /* solib descriptors may have handles to objfiles. Since their
+ storage has just been released, we'd better wipe the solib
+ descriptors as well.
+ */
+#if defined(SOLIB_RESTART)
+ SOLIB_RESTART ();
+#endif
+
+ symfile_objfile = NULL;
+ if (from_tty)
+ {
+ printf_unfiltered ("No symbol file now.\n");
+ }
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+ else
+ {
+ if ((argv = buildargv (args)) == NULL)
+ {
+ nomem (0);
+ }
+ cleanups = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+ while (*argv != NULL)
+ {
+ if (STREQ (*argv, "-mapped"))
+ {
+ mapped = 1;
+ }
+ else if (STREQ (*argv, "-readnow"))
+ {
+ readnow = 1;
+ }
+ else if (**argv == '-')
+ {
+ error ("unknown option `%s'", *argv);
+ }
+ else
+ {
+ char *p;
+
+ name = *argv;
+
+ /* this is for rombug remote only, to get the text relocation by
+ using link command */
+ p = strrchr(name, '/');
+ if (p != NULL) p++;
+ else p = name;
+
+ target_link(p, &text_relocation);
+
+ if (text_relocation == (CORE_ADDR)0)
+ return;
+ else if (text_relocation == (CORE_ADDR)-1)
+ {
+ symbol_file_add (name, from_tty, (CORE_ADDR)0,
+ 1, mapped, readnow, 1, 0);
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+ else
+ symbol_file_add (name, from_tty, (CORE_ADDR)text_relocation,
+ 0, mapped, readnow, 1, 0);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+ reinit_frame_cache ();
+
+ set_initial_language ();
+ }
+ argv++;
+ }
+
+ if (name == NULL)
+ {
+ error ("no symbol file name was specified");
+ }
+ TUIDO(((TuiOpaqueFuncPtr)tuiDisplayMainFunction));
+ do_cleanups (cleanups);
+ }
+}
+
+/* Set the initial language.
+
+ A better solution would be to record the language in the psymtab when reading
+ partial symbols, and then use it (if known) to set the language. This would
+ be a win for formats that encode the language in an easily discoverable place,
+ such as DWARF. For stabs, we can jump through hoops looking for specially
+ named symbols or try to intuit the language from the specific type of stabs
+ we find, but we can't do that until later when we read in full symbols.
+ FIXME. */
+
+static void
+set_initial_language ()
+{
+ struct partial_symtab *pst;
+ enum language lang = language_unknown;
+
+ pst = find_main_psymtab ();
+ if (pst != NULL)
+ {
+ if (pst -> filename != NULL)
+ {
+ lang = deduce_language_from_filename (pst -> filename);
+ }
+ if (lang == language_unknown)
+ {
+ /* Make C the default language */
+ lang = language_c;
+ }
+ set_language (lang);
+ expected_language = current_language; /* Don't warn the user */
+ }
+}
+
+/* Open file specified by NAME and hand it off to BFD for preliminary
+ analysis. Result is a newly initialized bfd *, which includes a newly
+ malloc'd` copy of NAME (tilde-expanded and made absolute).
+ In case of trouble, error() is called. */
+
+bfd *
+symfile_bfd_open (name)
+ char *name;
+{
+ bfd *sym_bfd;
+ int desc;
+ char *absolute_name;
+
+
+
+ name = tilde_expand (name); /* Returns 1st new malloc'd copy */
+
+ /* Look down path for it, allocate 2nd new malloc'd copy. */
+ desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+#if defined(__GO32__) || defined(_WIN32)
+ if (desc < 0)
+ {
+ char *exename = alloca (strlen (name) + 5);
+ strcat (strcpy (exename, name), ".exe");
+ desc = openp (getenv ("PATH"), 1, exename, O_RDONLY | O_BINARY,
+ 0, &absolute_name);
+ }
+#endif
+ if (desc < 0)
+ {
+ make_cleanup (free, name);
+ perror_with_name (name);
+ }
+ free (name); /* Free 1st new malloc'd copy */
+ name = absolute_name; /* Keep 2nd malloc'd copy in bfd */
+ /* It'll be freed in free_objfile(). */
+
+ sym_bfd = bfd_fdopenr (name, gnutarget, desc);
+ if (!sym_bfd)
+ {
+ close (desc);
+ make_cleanup (free, name);
+ error ("\"%s\": can't open to read symbols: %s.", name,
+ bfd_errmsg (bfd_get_error ()));
+ }
+ sym_bfd->cacheable = true;
+
+ if (!bfd_check_format (sym_bfd, bfd_object))
+ {
+ /* FIXME: should be checking for errors from bfd_close (for one thing,
+ on error it does not free all the storage associated with the
+ bfd). */
+ bfd_close (sym_bfd); /* This also closes desc */
+ make_cleanup (free, name);
+ error ("\"%s\": can't read symbols: %s.", name,
+ bfd_errmsg (bfd_get_error ()));
+ }
+
+#ifdef HPUXHPPA
+ {
+ /********* TARGET SPECIFIC CODE (HACK!) **********
+ *
+ * The following code is HP-specific. The "right" way of
+ * doing this is unknown, but we bet would involve a target-
+ * specific pre-file-load check using a generic mechanism.
+ */
+ static prevent_recursion = 0; /* Needed for hack below! HP-specific */
+
+ if( prevent_recursion == 0 ) {
+ if( hpread_pxdb_needed (sym_bfd, name)) {
+ /*
+ * This file has not been pre-processed.
+ * Preprocess now
+ */
+
+ if (hpread_call_pxdb(name))
+ {
+ /* The
+ * call above has used "system" to pre-process
+ * the on-disk file, so we now need to close
+ * and re-open the file.
+ */
+ bfd_close (sym_bfd); /* This also closes 'desc', */
+ /* hence the recursion. */
+ prevent_recursion++;
+ sym_bfd = symfile_bfd_open( name );
+ prevent_recursion--;
+ }
+ }
+ }
+}
+ /*************** END HACK ********************/
+#endif
+
+ return (sym_bfd);
+}
+
+/* Link a new symtab_fns into the global symtab_fns list. Called on gdb
+ startup by the _initialize routine in each object file format reader,
+ to register information about each format the the reader is prepared
+ to handle. */
void
+add_symtab_fns (sf)
+ struct sym_fns *sf;
+{
+ sf->next = symtab_fns;
+ symtab_fns = sf;
+}
+
+
+/* Initialize to read symbols from the symbol file sym_bfd. It either
+ returns or calls error(). The result is an initialized struct sym_fns
+ in the objfile structure, that contains cached information about the
+ symbol file. */
+
+static void
+find_sym_fns (objfile)
+ struct objfile *objfile;
+{
+ struct sym_fns *sf;
+ enum bfd_flavour our_flavour = bfd_get_flavour (objfile -> obfd);
+ char *our_target = bfd_get_target (objfile -> obfd);
+
+ /* Special kludge for RS/6000 and PowerMac. See xcoffread.c. */
+ if (STREQ (our_target, "aixcoff-rs6000") ||
+ STREQ (our_target, "xcoff-powermac"))
+ our_flavour = (enum bfd_flavour)-1;
+
+ /* Special kludge for apollo. See dstread.c. */
+ if (STREQN (our_target, "apollo", 6))
+ our_flavour = (enum bfd_flavour)-2;
+
+ for (sf = symtab_fns; sf != NULL; sf = sf -> next)
+ {
+ if (our_flavour == sf -> sym_flavour)
+ {
+ objfile -> sf = sf;
+ return;
+ }
+ }
+ error ("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown.",
+ bfd_get_target (objfile -> obfd));
+}
+\f
+/* This function runs the load command of our current target. */
+
+static void
load_command (arg, from_tty)
char *arg;
int from_tty;
{
+ if (arg == NULL)
+ arg = get_exec_file (1);
target_load (arg, from_tty);
}
-/* This function runs the add_syms command of our current target. */
+/* This version of "load" should be usable for any target. Currently
+ it is just used for remote targets, not inftarg.c or core files,
+ on the theory that only in that case is it useful.
+
+ Avoiding xmodem and the like seems like a win (a) because we don't have
+ to worry about finding it, and (b) On VMS, fork() is very slow and so
+ we don't want to run a subprocess. On the other hand, I'm not sure how
+ performance compares. */
+#define GENERIC_LOAD_CHUNK 256
+#define VALIDATE_DOWNLOAD 0
+void
+generic_load (filename, from_tty)
+ char *filename;
+ int from_tty;
+{
+ struct cleanup *old_cleanups;
+ asection *s;
+ bfd *loadfile_bfd;
+ time_t start_time, end_time; /* Start and end times of download */
+ unsigned long data_count = 0; /* Number of bytes transferred to memory */
+ int n;
+ unsigned long load_offset = 0; /* offset to add to vma for each section */
+ char buf[GENERIC_LOAD_CHUNK+8];
+#if VALIDATE_DOWNLOAD
+ char verify_buffer[GENERIC_LOAD_CHUNK+8] ;
+#endif
+
+ /* enable user to specify address for downloading as 2nd arg to load */
+ n = sscanf(filename, "%s 0x%lx", buf, &load_offset);
+ if (n > 1 )
+ filename = buf;
+ else
+ load_offset = 0;
+
+ loadfile_bfd = bfd_openr (filename, gnutarget);
+ if (loadfile_bfd == NULL)
+ {
+ perror_with_name (filename);
+ return;
+ }
+ /* FIXME: should be checking for errors from bfd_close (for one thing,
+ on error it does not free all the storage associated with the
+ bfd). */
+ old_cleanups = make_cleanup ((make_cleanup_func) bfd_close, loadfile_bfd);
+
+ if (!bfd_check_format (loadfile_bfd, bfd_object))
+ {
+ error ("\"%s\" is not an object file: %s", filename,
+ bfd_errmsg (bfd_get_error ()));
+ }
+
+ start_time = time (NULL);
+
+ for (s = loadfile_bfd->sections; s; s = s->next)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ bfd_size_type size;
+
+ size = bfd_get_section_size_before_reloc (s);
+ if (size > 0)
+ {
+ char *buffer;
+ struct cleanup *old_chain;
+ bfd_vma lma;
+ unsigned long l = size ;
+ int err;
+ char *sect;
+ unsigned long sent;
+ unsigned long len;
+
+ l = l > GENERIC_LOAD_CHUNK ? GENERIC_LOAD_CHUNK : l ;
+
+ buffer = xmalloc (size);
+ old_chain = make_cleanup (free, buffer);
+
+ lma = s->lma;
+ lma += load_offset;
+
+ /* Is this really necessary? I guess it gives the user something
+ to look at during a long download. */
+ printf_filtered ("Loading section %s, size 0x%lx lma ",
+ bfd_get_section_name (loadfile_bfd, s),
+ (unsigned long) size);
+ print_address_numeric (lma, 1, gdb_stdout);
+ printf_filtered ("\n");
+
+ bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
+
+ sect = (char *) bfd_get_section_name (loadfile_bfd, s);
+ sent = 0;
+ do
+ {
+ len = (size - sent) < l ? (size - sent) : l;
+ sent += len;
+ err = target_write_memory (lma, buffer, len);
+ if (ui_load_progress_hook)
+ if (ui_load_progress_hook (sect, sent))
+ error ("Canceled the download");
+#if VALIDATE_DOWNLOAD
+ /* Broken memories and broken monitors manifest themselves
+ here when bring new computers to life.
+ This doubles already slow downloads.
+ */
+ if (err) break ;
+ {
+ target_read_memory(lma,verify_buffer,len) ;
+ if (0 != bcmp(buffer,verify_buffer,len))
+ error("Download verify failed at %08x",
+ (unsigned long)lma) ;
+ }
+
+#endif
+ data_count += len ;
+ lma += len;
+ buffer += len;
+ } /* od */
+ while (err == 0 && sent < size);
+
+ if (err != 0)
+ error ("Memory access error while loading section %s.",
+ bfd_get_section_name (loadfile_bfd, s));
+
+ do_cleanups (old_chain);
+ }
+ }
+ }
+
+ end_time = time (NULL);
+ {
+ unsigned long entry ;
+ entry = bfd_get_start_address(loadfile_bfd) ;
+ printf_filtered ("Start address 0x%lx , load size %d\n", entry,data_count);
+ /* We were doing this in remote-mips.c, I suspect it is right
+ for other targets too. */
+ write_pc (entry);
+ }
+
+ /* FIXME: are we supposed to call symbol_file_add or not? According to
+ a comment from remote-mips.c (where a call to symbol_file_add was
+ commented out), making the call confuses GDB if more than one file is
+ loaded in. remote-nindy.c had no call to symbol_file_add, but remote-vx.c
+ does. */
+
+ report_transfer_performance (data_count, start_time, end_time);
+
+ do_cleanups (old_cleanups);
+}
+
+/* Report how fast the transfer went. */
+
+void
+report_transfer_performance (data_count, start_time, end_time)
+unsigned long data_count;
+time_t start_time, end_time;
+{
+ printf_filtered ("Transfer rate: ");
+ if (end_time != start_time)
+ printf_filtered ("%d bits/sec",
+ (data_count * 8) / (end_time - start_time));
+ else
+ printf_filtered ("%d bits in <1 sec", (data_count * 8));
+ printf_filtered (".\n");
+}
+
+/* This function allows the addition of incrementally linked object files.
+ It does not modify any state in the target, only in the debugger. */
+
+/* ARGSUSED */
+static void
+add_symbol_file_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char *name = NULL;
+ CORE_ADDR text_addr;
+ char *arg;
+ int readnow = 0;
+ int mapped = 0;
+
+ dont_repeat ();
+
+ if (args == NULL)
+ {
+ error ("add-symbol-file takes a file name and an address");
+ }
+
+ /* Make a copy of the string that we can safely write into. */
+
+ args = strdup (args);
+ make_cleanup (free, args);
+
+ /* Pick off any -option args and the file name. */
+
+ while ((*args != '\000') && (name == NULL))
+ {
+ while (isspace (*args)) {args++;}
+ arg = args;
+ while ((*args != '\000') && !isspace (*args)) {args++;}
+ if (*args != '\000')
+ {
+ *args++ = '\000';
+ }
+ if (*arg != '-')
+ {
+ name = arg;
+ }
+ else if (STREQ (arg, "-mapped"))
+ {
+ mapped = 1;
+ }
+ else if (STREQ (arg, "-readnow"))
+ {
+ readnow = 1;
+ }
+ else
+ {
+ error ("unknown option `%s'", arg);
+ }
+ }
+
+ /* After picking off any options and the file name, args should be
+ left pointing at the remainder of the command line, which should
+ be the address expression to evaluate. */
+
+ if (name == NULL)
+ {
+ error ("add-symbol-file takes a file name");
+ }
+ name = tilde_expand (name);
+ make_cleanup (free, name);
+
+ if (*args != '\000')
+ {
+ text_addr = parse_and_eval_address (args);
+ }
+ else
+ {
+ target_link(name, &text_addr);
+ if (text_addr == (CORE_ADDR)-1)
+ error("Don't know how to get text start location for this file");
+ }
+
+ /* FIXME-32x64: Assumes text_addr fits in a long. */
+ if ((from_tty)
+ && (!query ("add symbol table from file \"%s\" at text_addr = %s?\n",
+ name, local_hex_string ((unsigned long)text_addr))))
+ error ("Not confirmed.");
+
+ symbol_file_add (name, from_tty, text_addr, 0, mapped, readnow,
+ 1, /* user_loaded */
+ 0); /* We'll guess it's ! is_solib */
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+ reinit_frame_cache ();
+}
+\f
+static void
+add_shared_symbol_files_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+#ifdef ADD_SHARED_SYMBOL_FILES
+ ADD_SHARED_SYMBOL_FILES (args, from_tty);
+#else
+ error ("This command is not available in this configuration of GDB.");
+#endif
+}
+\f
+/* Re-read symbols if a symbol-file has changed. */
+void
+reread_symbols ()
+{
+ struct objfile *objfile;
+ long new_modtime;
+ int reread_one = 0;
+ struct stat new_statbuf;
+ int res;
+
+ /* With the addition of shared libraries, this should be modified,
+ the load time should be saved in the partial symbol tables, since
+ different tables may come from different source files. FIXME.
+ This routine should then walk down each partial symbol table
+ and see if the symbol table that it originates from has been changed */
+
+ for (objfile = object_files; objfile; objfile = objfile->next) {
+ if (objfile->obfd) {
+#ifdef IBM6000_TARGET
+ /* If this object is from a shared library, then you should
+ stat on the library name, not member name. */
+
+ if (objfile->obfd->my_archive)
+ res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
+ else
+#endif
+ res = stat (objfile->name, &new_statbuf);
+ if (res != 0) {
+ /* FIXME, should use print_sys_errmsg but it's not filtered. */
+ printf_filtered ("`%s' has disappeared; keeping its symbols.\n",
+ objfile->name);
+ continue;
+ }
+ new_modtime = new_statbuf.st_mtime;
+ if (new_modtime != objfile->mtime)
+ {
+ struct cleanup *old_cleanups;
+ struct section_offsets *offsets;
+ int num_offsets;
+ int section_offsets_size;
+ char *obfd_filename;
+
+ printf_filtered ("`%s' has changed; re-reading symbols.\n",
+ objfile->name);
+
+ /* There are various functions like symbol_file_add,
+ symfile_bfd_open, syms_from_objfile, etc., which might
+ appear to do what we want. But they have various other
+ effects which we *don't* want. So we just do stuff
+ ourselves. We don't worry about mapped files (for one thing,
+ any mapped file will be out of date). */
+
+ /* If we get an error, blow away this objfile (not sure if
+ that is the correct response for things like shared
+ libraries). */
+ old_cleanups = make_cleanup ((make_cleanup_func) free_objfile,
+ objfile);
+ /* We need to do this whenever any symbols go away. */
+ make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+ /* Clean up any state BFD has sitting around. We don't need
+ to close the descriptor but BFD lacks a way of closing the
+ BFD without closing the descriptor. */
+ obfd_filename = bfd_get_filename (objfile->obfd);
+ if (!bfd_close (objfile->obfd))
+ error ("Can't close BFD for %s: %s", objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+ objfile->obfd = bfd_openr (obfd_filename, gnutarget);
+ if (objfile->obfd == NULL)
+ error ("Can't open %s to read symbols.", objfile->name);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error ("Can't read symbols from %s: %s.", objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ psymbol_obstack. */
+ num_offsets = objfile->num_sections;
+ section_offsets_size =
+ sizeof (struct section_offsets)
+ + sizeof (objfile->section_offsets->offsets) * num_offsets;
+ offsets = (struct section_offsets *) alloca (section_offsets_size);
+ memcpy (offsets, objfile->section_offsets, section_offsets_size);
+
+ /* Nuke all the state that we will re-read. Much of the following
+ code which sets things to NULL really is necessary to tell
+ other parts of GDB that there is nothing currently there. */
+
+ /* FIXME: Do we have to free a whole linked list, or is this
+ enough? */
+ if (objfile->global_psymbols.list)
+ mfree (objfile->md, objfile->global_psymbols.list);
+ memset (&objfile -> global_psymbols, 0,
+ sizeof (objfile -> global_psymbols));
+ if (objfile->static_psymbols.list)
+ mfree (objfile->md, objfile->static_psymbols.list);
+ memset (&objfile -> static_psymbols, 0,
+ sizeof (objfile -> static_psymbols));
+
+ /* Free the obstacks for non-reusable objfiles */
+ obstack_free (&objfile -> psymbol_cache.cache, 0);
+ memset (&objfile -> psymbol_cache, 0,
+ sizeof (objfile -> psymbol_cache));
+ obstack_free (&objfile -> psymbol_obstack, 0);
+ obstack_free (&objfile -> symbol_obstack, 0);
+ obstack_free (&objfile -> type_obstack, 0);
+ objfile->sections = NULL;
+ objfile->symtabs = NULL;
+ objfile->psymtabs = NULL;
+ objfile->free_psymtabs = NULL;
+ objfile->msymbols = NULL;
+ objfile->minimal_symbol_count= 0;
+ objfile->fundamental_types = NULL;
+ if (objfile -> sf != NULL)
+ {
+ (*objfile -> sf -> sym_finish) (objfile);
+ }
+
+ /* We never make this a mapped file. */
+ objfile -> md = NULL;
+ /* obstack_specify_allocation also initializes the obstack so
+ it is empty. */
+ obstack_specify_allocation (&objfile -> psymbol_cache.cache, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> type_obstack, 0, 0,
+ xmalloc, free);
+ if (build_objfile_section_table (objfile))
+ {
+ error ("Can't find the file sections in `%s': %s",
+ objfile -> name, bfd_errmsg (bfd_get_error ()));
+ }
+
+ /* We use the same section offsets as from last time. I'm not
+ sure whether that is always correct for shared libraries. */
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile -> psymbol_obstack, section_offsets_size);
+ memcpy (objfile->section_offsets, offsets, section_offsets_size);
+ objfile->num_sections = num_offsets;
+
+ /* What the hell is sym_new_init for, anyway? The concept of
+ distinguishing between the main file and additional files
+ in this way seems rather dubious. */
+ if (objfile == symfile_objfile)
+ {
+ (*objfile->sf->sym_new_init) (objfile);
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (1, 1);
+ /* The "mainline" parameter is a hideous hack; I think leaving it
+ zero is OK since dbxread.c also does what it needs to do if
+ objfile->global_psymbols.size is 0. */
+ (*objfile->sf->sym_read) (objfile, objfile->section_offsets, 0);
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)\n");
+ wrap_here ("");
+ }
+ objfile -> flags |= OBJF_SYMS;
+
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, 1);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+
+ reinit_frame_cache ();
+
+ /* Discard cleanups as symbol reading was successful. */
+ discard_cleanups (old_cleanups);
+
+ /* If the mtime has changed between the time we set new_modtime
+ and now, we *want* this to be out of date, so don't call stat
+ again now. */
+ objfile->mtime = new_modtime;
+ reread_one = 1;
+
+ /* Call this after reading in a new symbol table to give target
+ dependant code a crack at the new symbols. For instance, this
+ could be used to update the values of target-specific symbols GDB
+ needs to keep track of (such as _sigtramp, or whatever). */
+
+ TARGET_SYMFILE_POSTREAD (objfile);
+ }
+ }
+ }
+
+ if (reread_one)
+ clear_symtab_users ();
+}
+
+\f
+
+typedef struct {
+ char *ext;
+ enum language lang;
+} filename_language;
+
+static filename_language * filename_language_table;
+static int fl_table_size, fl_table_next;
+
+static void
+add_filename_language (ext, lang)
+ char *ext;
+ enum language lang;
+{
+ if (fl_table_next >= fl_table_size)
+ {
+ fl_table_size += 10;
+ filename_language_table = realloc (filename_language_table,
+ fl_table_size);
+ }
+
+ filename_language_table[fl_table_next].ext = strsave (ext);
+ filename_language_table[fl_table_next].lang = lang;
+ fl_table_next++;
+}
+
+static char *ext_args;
+
+static void
+set_ext_lang_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int i;
+ char *cp = ext_args;
+ enum language lang;
+
+ /* First arg is filename extension, starting with '.' */
+ if (*cp != '.')
+ error ("'%s': Filename extension must begin with '.'", ext_args);
+
+ /* Find end of first arg. */
+ while (*cp && !isspace (*cp))
+ cp++;
+
+ if (*cp == '\0')
+ error ("'%s': two arguments required -- filename extension and language",
+ ext_args);
+
+ /* Null-terminate first arg */
+ *cp++ = '\0';
+
+ /* Find beginning of second arg, which should be a source language. */
+ while (*cp && isspace (*cp))
+ cp++;
+
+ if (*cp == '\0')
+ error ("'%s': two arguments required -- filename extension and language",
+ ext_args);
+
+ /* Lookup the language from among those we know. */
+ lang = language_enum (cp);
+
+ /* Now lookup the filename extension: do we already know it? */
+ for (i = 0; i < fl_table_next; i++)
+ if (0 == strcmp (ext_args, filename_language_table[i].ext))
+ break;
+
+ if (i >= fl_table_next)
+ {
+ /* new file extension */
+ add_filename_language (ext_args, lang);
+ }
+ else
+ {
+ /* redefining a previously known filename extension */
+
+ /* if (from_tty) */
+ /* query ("Really make files of type %s '%s'?", */
+ /* ext_args, language_str (lang)); */
+
+ free (filename_language_table[i].ext);
+ filename_language_table[i].ext = strsave (ext_args);
+ filename_language_table[i].lang = lang;
+ }
+}
+
+static void
+info_ext_lang_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int i;
+
+ printf_filtered ("Filename extensions and the languages they represent:");
+ printf_filtered ("\n\n");
+ for (i = 0; i < fl_table_next; i++)
+ printf_filtered ("\t%s\t- %s\n",
+ filename_language_table[i].ext,
+ language_str (filename_language_table[i].lang));
+}
+
+static void
+init_filename_language_table ()
+{
+ if (fl_table_size == 0) /* protect against repetition */
+ {
+ fl_table_size = 20;
+ fl_table_next = 0;
+ filename_language_table =
+ xmalloc (fl_table_size * sizeof (*filename_language_table));
+ add_filename_language (".c", language_c);
+ add_filename_language (".C", language_cplus);
+ add_filename_language (".cc", language_cplus);
+ add_filename_language (".cp", language_cplus);
+ add_filename_language (".cpp", language_cplus);
+ add_filename_language (".cxx", language_cplus);
+ add_filename_language (".c++", language_cplus);
+ /* start-sanitize-java */
+ add_filename_language (".java", language_java);
+ add_filename_language (".class", language_java);
+ /* end-sanitize-java */
+ add_filename_language (".ch", language_chill);
+ add_filename_language (".c186", language_chill);
+ add_filename_language (".c286", language_chill);
+ add_filename_language (".f", language_fortran);
+ add_filename_language (".F", language_fortran);
+ add_filename_language (".s", language_asm);
+ add_filename_language (".S", language_asm);
+ }
+}
+
+enum language
+deduce_language_from_filename (filename)
+ char *filename;
+{
+ int i;
+ char *cp;
+
+ if (filename != NULL)
+ if ((cp = strrchr (filename, '.')) != NULL)
+ for (i = 0; i < fl_table_next; i++)
+ if (strcmp (cp, filename_language_table[i].ext) == 0)
+ return filename_language_table[i].lang;
+
+ return language_unknown;
+}
+\f
+/* allocate_symtab:
+
+ Allocate and partly initialize a new symbol table. Return a pointer
+ to it. error() if no space.
+
+ Caller must set these fields:
+ LINETABLE(symtab)
+ symtab->blockvector
+ symtab->dirname
+ symtab->free_code
+ symtab->free_ptr
+ possibly free_named_symtabs (symtab->filename);
+ */
+
+struct symtab *
+allocate_symtab (filename, objfile)
+ char *filename;
+ struct objfile *objfile;
+{
+ register struct symtab *symtab;
+
+ symtab = (struct symtab *)
+ obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symtab));
+ memset (symtab, 0, sizeof (*symtab));
+ symtab -> filename = obsavestring (filename, strlen (filename),
+ &objfile -> symbol_obstack);
+ symtab -> fullname = NULL;
+ symtab -> language = deduce_language_from_filename (filename);
+ symtab -> debugformat = obsavestring ("unknown", 7,
+ &objfile -> symbol_obstack);
+
+ /* Hook it to the objfile it comes from */
+
+ symtab -> objfile = objfile;
+ symtab -> next = objfile -> symtabs;
+ objfile -> symtabs = symtab;
+
+ /* FIXME: This should go away. It is only defined for the Z8000,
+ and the Z8000 definition of this macro doesn't have anything to
+ do with the now-nonexistent EXTRA_SYMTAB_INFO macro, it's just
+ here for convenience. */
+#ifdef INIT_EXTRA_SYMTAB_INFO
+ INIT_EXTRA_SYMTAB_INFO (symtab);
+#endif
+
+ return (symtab);
+}
+
+struct partial_symtab *
+allocate_psymtab (filename, objfile)
+ char *filename;
+ struct objfile *objfile;
+{
+ struct partial_symtab *psymtab;
+
+ if (objfile -> free_psymtabs)
+ {
+ psymtab = objfile -> free_psymtabs;
+ objfile -> free_psymtabs = psymtab -> next;
+ }
+ else
+ psymtab = (struct partial_symtab *)
+ obstack_alloc (&objfile -> psymbol_obstack,
+ sizeof (struct partial_symtab));
+
+ memset (psymtab, 0, sizeof (struct partial_symtab));
+ psymtab -> filename = obsavestring (filename, strlen (filename),
+ &objfile -> psymbol_obstack);
+ psymtab -> symtab = NULL;
+
+ /* Prepend it to the psymtab list for the objfile it belongs to.
+ Psymtabs are searched in most recent inserted -> least recent
+ inserted order. */
+
+ psymtab -> objfile = objfile;
+ psymtab -> next = objfile -> psymtabs;
+ objfile -> psymtabs = psymtab;
+#if 0
+ {
+ struct partial_symtab **prev_pst;
+ psymtab -> objfile = objfile;
+ psymtab -> next = NULL;
+ prev_pst = &(objfile -> psymtabs);
+ while ((*prev_pst) != NULL)
+ prev_pst = &((*prev_pst) -> next);
+ (*prev_pst) = psymtab;
+ }
+#endif
+
+ return (psymtab);
+}
+
+void
+discard_psymtab (pst)
+ struct partial_symtab *pst;
+{
+ struct partial_symtab **prev_pst;
+
+ /* From dbxread.c:
+ Empty psymtabs happen as a result of header files which don't
+ have any symbols in them. There can be a lot of them. But this
+ check is wrong, in that a psymtab with N_SLINE entries but
+ nothing else is not empty, but we don't realize that. Fixing
+ that without slowing things down might be tricky. */
+
+ /* First, snip it out of the psymtab chain */
+
+ prev_pst = &(pst->objfile->psymtabs);
+ while ((*prev_pst) != pst)
+ prev_pst = &((*prev_pst)->next);
+ (*prev_pst) = pst->next;
+
+ /* Next, put it on a free list for recycling */
+
+ pst->next = pst->objfile->free_psymtabs;
+ pst->objfile->free_psymtabs = pst;
+}
+
+\f
+/* Reset all data structures in gdb which may contain references to symbol
+ table data. */
+
+void
+clear_symtab_users ()
+{
+ /* Someday, we should do better than this, by only blowing away
+ the things that really need to be blown. */
+ clear_value_history ();
+ clear_displays ();
+ clear_internalvars ();
+ breakpoint_re_set ();
+ set_default_breakpoint (0, 0, 0, 0);
+ current_source_symtab = 0;
+ current_source_line = 0;
+ clear_pc_function_cache ();
+ target_new_objfile (NULL);
+}
+
+/* clear_symtab_users_once:
+
+ This function is run after symbol reading, or from a cleanup.
+ If an old symbol table was obsoleted, the old symbol table
+ has been blown away, but the other GDB data structures that may
+ reference it have not yet been cleared or re-directed. (The old
+ symtab was zapped, and the cleanup queued, in free_named_symtab()
+ below.)
+
+ This function can be queued N times as a cleanup, or called
+ directly; it will do all the work the first time, and then will be a
+ no-op until the next time it is queued. This works by bumping a
+ counter at queueing time. Much later when the cleanup is run, or at
+ the end of symbol processing (in case the cleanup is discarded), if
+ the queued count is greater than the "done-count", we do the work
+ and set the done-count to the queued count. If the queued count is
+ less than or equal to the done-count, we just ignore the call. This
+ is needed because reading a single .o file will often replace many
+ symtabs (one per .h file, for example), and we don't want to reset
+ the breakpoints N times in the user's face.
+
+ The reason we both queue a cleanup, and call it directly after symbol
+ reading, is because the cleanup protects us in case of errors, but is
+ discarded if symbol reading is successful. */
+
+#if 0
+/* FIXME: As free_named_symtabs is currently a big noop this function
+ is no longer needed. */
+static void
+clear_symtab_users_once PARAMS ((void));
+
+static int clear_symtab_users_queued;
+static int clear_symtab_users_done;
+
+static void
+clear_symtab_users_once ()
+{
+ /* Enforce once-per-`do_cleanups'-semantics */
+ if (clear_symtab_users_queued <= clear_symtab_users_done)
+ return;
+ clear_symtab_users_done = clear_symtab_users_queued;
+
+ clear_symtab_users ();
+}
+#endif
+
+/* Delete the specified psymtab, and any others that reference it. */
+
+static void
+cashier_psymtab (pst)
+ struct partial_symtab *pst;
+{
+ struct partial_symtab *ps, *pprev = NULL;
+ int i;
+
+ /* Find its previous psymtab in the chain */
+ for (ps = pst->objfile->psymtabs; ps; ps = ps->next) {
+ if (ps == pst)
+ break;
+ pprev = ps;
+ }
+
+ if (ps) {
+ /* Unhook it from the chain. */
+ if (ps == pst->objfile->psymtabs)
+ pst->objfile->psymtabs = ps->next;
+ else
+ pprev->next = ps->next;
+
+ /* FIXME, we can't conveniently deallocate the entries in the
+ partial_symbol lists (global_psymbols/static_psymbols) that
+ this psymtab points to. These just take up space until all
+ the psymtabs are reclaimed. Ditto the dependencies list and
+ filename, which are all in the psymbol_obstack. */
+
+ /* We need to cashier any psymtab that has this one as a dependency... */
+again:
+ for (ps = pst->objfile->psymtabs; ps; ps = ps->next) {
+ for (i = 0; i < ps->number_of_dependencies; i++) {
+ if (ps->dependencies[i] == pst) {
+ cashier_psymtab (ps);
+ goto again; /* Must restart, chain has been munged. */
+ }
+ }
+ }
+ }
+}
+
+/* If a symtab or psymtab for filename NAME is found, free it along
+ with any dependent breakpoints, displays, etc.
+ Used when loading new versions of object modules with the "add-file"
+ command. This is only called on the top-level symtab or psymtab's name;
+ it is not called for subsidiary files such as .h files.
+
+ Return value is 1 if we blew away the environment, 0 if not.
+ FIXME. The return valu appears to never be used.
+
+ FIXME. I think this is not the best way to do this. We should
+ work on being gentler to the environment while still cleaning up
+ all stray pointers into the freed symtab. */
+
+int
+free_named_symtabs (name)
+ char *name;
+{
+#if 0
+ /* FIXME: With the new method of each objfile having it's own
+ psymtab list, this function needs serious rethinking. In particular,
+ why was it ever necessary to toss psymtabs with specific compilation
+ unit filenames, as opposed to all psymtabs from a particular symbol
+ file? -- fnf
+ Well, the answer is that some systems permit reloading of particular
+ compilation units. We want to blow away any old info about these
+ compilation units, regardless of which objfiles they arrived in. --gnu. */
+
+ register struct symtab *s;
+ register struct symtab *prev;
+ register struct partial_symtab *ps;
+ struct blockvector *bv;
+ int blewit = 0;
+
+ /* We only wack things if the symbol-reload switch is set. */
+ if (!symbol_reloading)
+ return 0;
+
+ /* Some symbol formats have trouble providing file names... */
+ if (name == 0 || *name == '\0')
+ return 0;
+
+ /* Look for a psymtab with the specified name. */
+
+again2:
+ for (ps = partial_symtab_list; ps; ps = ps->next) {
+ if (STREQ (name, ps->filename)) {
+ cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
+ goto again2; /* Must restart, chain has been munged */
+ }
+ }
+
+ /* Look for a symtab with the specified name. */
+
+ for (s = symtab_list; s; s = s->next)
+ {
+ if (STREQ (name, s->filename))
+ break;
+ prev = s;
+ }
+
+ if (s)
+ {
+ if (s == symtab_list)
+ symtab_list = s->next;
+ else
+ prev->next = s->next;
+
+ /* For now, queue a delete for all breakpoints, displays, etc., whether
+ or not they depend on the symtab being freed. This should be
+ changed so that only those data structures affected are deleted. */
+
+ /* But don't delete anything if the symtab is empty.
+ This test is necessary due to a bug in "dbxread.c" that
+ causes empty symtabs to be created for N_SO symbols that
+ contain the pathname of the object file. (This problem
+ has been fixed in GDB 3.9x). */
+
+ bv = BLOCKVECTOR (s);
+ if (BLOCKVECTOR_NBLOCKS (bv) > 2
+ || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
+ || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
+ {
+ complain (&oldsyms_complaint, name);
+
+ clear_symtab_users_queued++;
+ make_cleanup (clear_symtab_users_once, 0);
+ blewit = 1;
+ } else {
+ complain (&empty_symtab_complaint, name);
+ }
+
+ free_symtab (s);
+ }
+ else
+ {
+ /* It is still possible that some breakpoints will be affected
+ even though no symtab was found, since the file might have
+ been compiled without debugging, and hence not be associated
+ with a symtab. In order to handle this correctly, we would need
+ to keep a list of text address ranges for undebuggable files.
+ For now, we do nothing, since this is a fairly obscure case. */
+ ;
+ }
+
+ /* FIXME, what about the minimal symbol table? */
+ return blewit;
+#else
+ return (0);
+#endif
+}
+\f
+/* Allocate and partially fill a partial symtab. It will be
+ completely filled at the end of the symbol list.
+
+ SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+ is the address relative to which its symbols are (incremental) or 0
+ (normal). */
+
+
+struct partial_symtab *
+start_psymtab_common (objfile, section_offsets,
+ filename, textlow, global_syms, static_syms)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ char *filename;
+ CORE_ADDR textlow;
+ struct partial_symbol **global_syms;
+ struct partial_symbol **static_syms;
+{
+ struct partial_symtab *psymtab;
+
+ psymtab = allocate_psymtab (filename, objfile);
+ psymtab -> section_offsets = section_offsets;
+ psymtab -> textlow = textlow;
+ psymtab -> texthigh = psymtab -> textlow; /* default */
+ psymtab -> globals_offset = global_syms - objfile -> global_psymbols.list;
+ psymtab -> statics_offset = static_syms - objfile -> static_psymbols.list;
+ return (psymtab);
+}
+\f
+/* Add a symbol with a long value to a psymtab.
+ Since one arg is a struct, we pass in a ptr and deref it (sigh). */
+
+void
+add_psymbol_to_list (name, namelength, namespace, class, list, val, coreaddr,
+ language, objfile)
+ char *name;
+ int namelength;
+ namespace_enum namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ long val; /* Value as a long */
+ CORE_ADDR coreaddr; /* Value as a CORE_ADDR */
+ enum language language;
+ struct objfile *objfile;
+{
+ register struct partial_symbol *psym;
+ char *buf = alloca (namelength + 1);
+ /* psymbol is static so that there will be no uninitialized gaps in the
+ structure which might contain random data, causing cache misses in
+ bcache. */
+ static struct partial_symbol psymbol;
+
+ /* Create local copy of the partial symbol */
+ memcpy (buf, name, namelength);
+ buf[namelength] = '\0';
+ SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+ /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+ if (val != 0)
+ {
+ SYMBOL_VALUE (&psymbol) = val;
+ }
+ else
+ {
+ SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+ }
+ SYMBOL_SECTION (&psymbol) = 0;
+ SYMBOL_LANGUAGE (&psymbol) = language;
+ PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_CLASS (&psymbol) = class;
+ SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+ /* Stash the partial symbol away in the cache */
+ psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+ /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list, objfile);
+ }
+ *list->next++ = psym;
+ OBJSTAT (objfile, n_psyms++);
+}
+
+/* Add a symbol with a long value to a psymtab. This differs from
+ * add_psymbol_to_list above in taking both a mangled and a demangled
+ * name. */
+
+void
+add_psymbol_with_dem_name_to_list (name, namelength, dem_name, dem_namelength,
+ namespace, class, list, val, coreaddr, language, objfile)
+ char *name;
+ int namelength;
+ char *dem_name;
+ int dem_namelength;
+ namespace_enum namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ long val; /* Value as a long */
+ CORE_ADDR coreaddr; /* Value as a CORE_ADDR */
+ enum language language;
+ struct objfile *objfile;
+{
+ register struct partial_symbol *psym;
+ char *buf = alloca (namelength + 1);
+ /* psymbol is static so that there will be no uninitialized gaps in the
+ structure which might contain random data, causing cache misses in
+ bcache. */
+ static struct partial_symbol psymbol;
+
+ /* Create local copy of the partial symbol */
+
+ memcpy (buf, name, namelength);
+ buf[namelength] = '\0';
+ SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+
+ buf = alloca (dem_namelength + 1);
+ memcpy (buf, dem_name, dem_namelength);
+ buf[dem_namelength] = '\0';
+
+ switch (language)
+ {
+ case language_c:
+ case language_cplus:
+ SYMBOL_CPLUS_DEMANGLED_NAME (&psymbol) =
+ bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+ break;
+ case language_chill:
+ SYMBOL_CHILL_DEMANGLED_NAME (&psymbol) =
+ bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+
+ /* FIXME What should be done for the default case? Ignoring for now. */
+ }
+
+ /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+ if (val != 0)
+ {
+ SYMBOL_VALUE (&psymbol) = val;
+ }
+ else
+ {
+ SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+ }
+ SYMBOL_SECTION (&psymbol) = 0;
+ SYMBOL_LANGUAGE (&psymbol) = language;
+ PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_CLASS (&psymbol) = class;
+ SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+ /* Stash the partial symbol away in the cache */
+ psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+ /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list, objfile);
+ }
+ *list->next++ = psym;
+ OBJSTAT (objfile, n_psyms++);
+}
+
+/* Initialize storage for partial symbols. */
+
+void
+init_psymbol_list (objfile, total_symbols)
+ struct objfile *objfile;
+ int total_symbols;
+{
+ /* Free any previously allocated psymbol lists. */
+
+ if (objfile -> global_psymbols.list)
+ {
+ mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
+ }
+ if (objfile -> static_psymbols.list)
+ {
+ mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
+ }
+
+ /* Current best guess is that approximately a twentieth
+ of the total symbols (in a debugging file) are global or static
+ oriented symbols */
+
+ objfile -> global_psymbols.size = total_symbols / 10;
+ objfile -> static_psymbols.size = total_symbols / 10;
+
+ if (objfile -> global_psymbols.size > 0)
+ {
+ objfile -> global_psymbols.next =
+ objfile -> global_psymbols.list = (struct partial_symbol **)
+ xmmalloc (objfile -> md, (objfile -> global_psymbols.size
+ * sizeof (struct partial_symbol *)));
+ }
+ if (objfile -> static_psymbols.size > 0)
+ {
+ objfile -> static_psymbols.next =
+ objfile -> static_psymbols.list = (struct partial_symbol **)
+ xmmalloc (objfile -> md, (objfile -> static_psymbols.size
+ * sizeof (struct partial_symbol *)));
+ }
+}
+
+/* OVERLAYS:
+ The following code implements an abstraction for debugging overlay sections.
+
+ The target model is as follows:
+ 1) The gnu linker will permit multiple sections to be mapped into the
+ same VMA, each with its own unique LMA (or load address).
+ 2) It is assumed that some runtime mechanism exists for mapping the
+ sections, one by one, from the load address into the VMA address.
+ 3) This code provides a mechanism for gdb to keep track of which
+ sections should be considered to be mapped from the VMA to the LMA.
+ This information is used for symbol lookup, and memory read/write.
+ For instance, if a section has been mapped then its contents
+ should be read from the VMA, otherwise from the LMA.
+
+ Two levels of debugger support for overlays are available. One is
+ "manual", in which the debugger relies on the user to tell it which
+ overlays are currently mapped. This level of support is
+ implemented entirely in the core debugger, and the information about
+ whether a section is mapped is kept in the objfile->obj_section table.
+
+ The second level of support is "automatic", and is only available if
+ the target-specific code provides functionality to read the target's
+ overlay mapping table, and translate its contents for the debugger
+ (by updating the mapped state information in the obj_section tables).
+
+ The interface is as follows:
+ User commands:
+ overlay map <name> -- tell gdb to consider this section mapped
+ overlay unmap <name> -- tell gdb to consider this section unmapped
+ overlay list -- list the sections that GDB thinks are mapped
+ overlay read-target -- get the target's state of what's mapped
+ overlay off/manual/auto -- set overlay debugging state
+ Functional interface:
+ find_pc_mapped_section(pc): if the pc is in the range of a mapped
+ section, return that section.
+ find_pc_overlay(pc): find any overlay section that contains
+ the pc, either in its VMA or its LMA
+ overlay_is_mapped(sect): true if overlay is marked as mapped
+ section_is_overlay(sect): true if section's VMA != LMA
+ pc_in_mapped_range(pc,sec): true if pc belongs to section's VMA
+ pc_in_unmapped_range(...): true if pc belongs to section's LMA
+ overlay_mapped_address(...): map an address from section's LMA to VMA
+ overlay_unmapped_address(...): map an address from section's VMA to LMA
+ symbol_overlayed_address(...): Return a "current" address for symbol:
+ either in VMA or LMA depending on whether
+ the symbol's section is currently mapped
+ */
+
+/* Overlay debugging state: */
+
+int overlay_debugging = 0; /* 0 == off, 1 == manual, -1 == auto */
+int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
+
+/* Target vector for refreshing overlay mapped state */
+static void simple_overlay_update PARAMS ((struct obj_section *));
+void (*target_overlay_update) PARAMS ((struct obj_section *))
+ = simple_overlay_update;
+
+/* Function: section_is_overlay (SECTION)
+ Returns true if SECTION has VMA not equal to LMA, ie.
+ SECTION is loaded at an address different from where it will "run". */
+
+int
+section_is_overlay (section)
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section->lma != 0 &&
+ section->vma != section->lma)
+ return 1;
+
+ return 0;
+}
+
+/* Function: overlay_invalidate_all (void)
+ Invalidate the mapped state of all overlay sections (mark it as stale). */
+
+static void
+overlay_invalidate_all ()
+{
+ struct objfile *objfile;
+ struct obj_section *sect;
+
+ ALL_OBJSECTIONS (objfile, sect)
+ if (section_is_overlay (sect->the_bfd_section))
+ sect->ovly_mapped = -1;
+}
+
+/* Function: overlay_is_mapped (SECTION)
+ Returns true if section is an overlay, and is currently mapped.
+ Private: public access is thru function section_is_mapped.
+
+ Access to the ovly_mapped flag is restricted to this function, so
+ that we can do automatic update. If the global flag
+ OVERLAY_CACHE_INVALID is set (by wait_for_inferior), then call
+ overlay_invalidate_all. If the mapped state of the particular
+ section is stale, then call TARGET_OVERLAY_UPDATE to refresh it. */
+
+static int
+overlay_is_mapped (osect)
+ struct obj_section *osect;
+{
+ if (osect == 0 || !section_is_overlay (osect->the_bfd_section))
+ return 0;
+
+ switch (overlay_debugging)
+ {
+ default:
+ case 0: return 0; /* overlay debugging off */
+ case -1: /* overlay debugging automatic */
+ /* Unles there is a target_overlay_update function,
+ there's really nothing useful to do here (can't really go auto) */
+ if (target_overlay_update)
+ {
+ if (overlay_cache_invalid)
+ {
+ overlay_invalidate_all ();
+ overlay_cache_invalid = 0;
+ }
+ if (osect->ovly_mapped == -1)
+ (*target_overlay_update) (osect);
+ }
+ /* fall thru to manual case */
+ case 1: /* overlay debugging manual */
+ return osect->ovly_mapped == 1;
+ }
+}
+
+/* Function: section_is_mapped
+ Returns true if section is an overlay, and is currently mapped. */
+
+int
+section_is_mapped (section)
+ asection *section;
+{
+ struct objfile *objfile;
+ struct obj_section *osect;
+
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ ALL_OBJSECTIONS (objfile, osect)
+ if (osect->the_bfd_section == section)
+ return overlay_is_mapped (osect);
+
+ return 0;
+}
+
+/* Function: pc_in_unmapped_range
+ If PC falls into the lma range of SECTION, return true, else false. */
-void
-add_symbol_file_command (args, from_tty)
- char *args;
- int from_tty;
+CORE_ADDR
+pc_in_unmapped_range (pc, section)
+ CORE_ADDR pc;
+ asection *section;
{
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
+ int size;
- target_add_syms (args, from_tty);
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ {
+ size = bfd_get_section_size_before_reloc (section);
+ if (section->lma <= pc && pc < section->lma + size)
+ return 1;
+ }
+ return 0;
}
-/* This function allows the addition of incrementally linked object files. */
+/* Function: pc_in_mapped_range
+ If PC falls into the vma range of SECTION, return true, else false. */
-/* ARGSUSED */
-void
-add_syms_addr_command (arg_string, from_tty)
- char* arg_string;
- int from_tty;
+CORE_ADDR
+pc_in_mapped_range (pc, section)
+ CORE_ADDR pc;
+ asection *section;
{
- char *name;
- CORE_ADDR text_addr;
-
- if (arg_string == 0)
- error ("add-symbol-file takes a file name and an address");
+ int size;
- arg_string = tilde_expand (arg_string);
- make_cleanup (free, arg_string);
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ {
+ size = bfd_get_section_size_before_reloc (section);
+ if (section->vma <= pc && pc < section->vma + size)
+ return 1;
+ }
+ return 0;
+}
- for( ; *arg_string == ' '; arg_string++ );
- name = arg_string;
- for( ; *arg_string && *arg_string != ' ' ; arg_string++ );
- *arg_string++ = (char) 0;
+/* Function: overlay_unmapped_address (PC, SECTION)
+ Returns the address corresponding to PC in the unmapped (load) range.
+ May be the same as PC. */
- if (name[0] == 0)
- error ("add-symbol-file takes a file name and an address");
+CORE_ADDR
+overlay_unmapped_address (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section_is_overlay (section) &&
+ pc_in_mapped_range (pc, section))
+ return pc + section->lma - section->vma;
- text_addr = parse_and_eval_address (arg_string);
+ return pc;
+}
- dont_repeat ();
+/* Function: overlay_mapped_address (PC, SECTION)
+ Returns the address corresponding to PC in the mapped (runtime) range.
+ May be the same as PC. */
- if (!query ("add symbol table from file \"%s\" at text_addr = 0x%x\n",
- name, text_addr))
- error ("Not confirmed.");
+CORE_ADDR
+overlay_mapped_address (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section_is_overlay (section) &&
+ pc_in_unmapped_range (pc, section))
+ return pc + section->vma - section->lma;
- symbol_file_add (name, 0, text_addr, 0);
+ return pc;
}
-\f
-/* Re-read symbols if the symbol-file has changed. */
-void
-reread_symbols ()
-{
- struct stat symstat;
- /* With the addition of shared libraries, this should be modified,
- the load time should be saved in the partial symbol tables, since
- different tables may come from different source files. FIXME.
- This routine should then walk down each partial symbol table
- and see if the symbol table that it originates from has been changed
- */
- if (stat (symfile, &symstat) < 0)
- /* Can't read symbol-file. Assume it is up to date. */
- return;
+/* Function: symbol_overlayed_address
+ Return one of two addresses (relative to the VMA or to the LMA),
+ depending on whether the section is mapped or not. */
- if (symstat.st_mtime > symfile_mtime)
+CORE_ADDR
+symbol_overlayed_address (address, section)
+ CORE_ADDR address;
+ asection *section;
+{
+ if (overlay_debugging)
{
- printf_filtered ("Symbol file has changed; re-reading symbols.\n");
- symbol_file_command (symfile, 0);
- breakpoint_re_set ();
+ /* If the symbol has no section, just return its regular address. */
+ if (section == 0)
+ return address;
+ /* If the symbol's section is not an overlay, just return its address */
+ if (!section_is_overlay (section))
+ return address;
+ /* If the symbol's section is mapped, just return its address */
+ if (section_is_mapped (section))
+ return address;
+ /*
+ * HOWEVER: if the symbol is in an overlay section which is NOT mapped,
+ * then return its LOADED address rather than its vma address!!
+ */
+ return overlay_unmapped_address (address, section);
}
+ return address;
}
-/* This function is really horrible, but to avoid it, there would need
- to be more filling in of forward references. */
-void
-fill_in_vptr_fieldno (type)
- struct type *type;
+/* Function: find_pc_overlay (PC)
+ Return the best-match overlay section for PC:
+ If PC matches a mapped overlay section's VMA, return that section.
+ Else if PC matches an unmapped section's VMA, return that section.
+ Else if PC matches an unmapped section's LMA, return that section. */
+
+asection *
+find_pc_overlay (pc)
+ CORE_ADDR pc;
{
- if (TYPE_VPTR_FIELDNO (type) < 0)
- {
- int i;
- for (i = 1; i < TYPE_N_BASECLASSES (type); i++)
+ struct objfile *objfile;
+ struct obj_section *osect, *best_match = NULL;
+
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (section_is_overlay (osect->the_bfd_section))
{
- fill_in_vptr_fieldno (TYPE_BASECLASS (type, i));
- if (TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i)) >= 0)
+ if (pc_in_mapped_range (pc, osect->the_bfd_section))
{
- TYPE_VPTR_FIELDNO (type)
- = TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i));
- TYPE_VPTR_BASETYPE (type)
- = TYPE_VPTR_BASETYPE (TYPE_BASECLASS (type, i));
- break;
+ if (overlay_is_mapped (osect))
+ return osect->the_bfd_section;
+ else
+ best_match = osect;
}
+ else if (pc_in_unmapped_range (pc, osect->the_bfd_section))
+ best_match = osect;
}
- }
+ return best_match ? best_match->the_bfd_section : NULL;
}
-\f
-/* Functions to handle complaints during symbol reading. */
-/* How many complaints about a particular thing should be printed before
- we stop whining about it? */
+/* Function: find_pc_mapped_section (PC)
+ If PC falls into the VMA address range of an overlay section that is
+ currently marked as MAPPED, return that section. Else return NULL. */
-static unsigned stop_whining = 1;
+asection *
+find_pc_mapped_section (pc)
+ CORE_ADDR pc;
+{
+ struct objfile *objfile;
+ struct obj_section *osect;
-/* Print a complaint about the input symbols, and link the complaint block
- into a chain for later handling. Result is 1 if the complaint was
- printed, 0 if it was suppressed. */
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (pc_in_mapped_range (pc, osect->the_bfd_section) &&
+ overlay_is_mapped (osect))
+ return osect->the_bfd_section;
-int
-complain (complaint, val)
- struct complaint *complaint;
- char *val;
-{
- complaint->counter++;
- if (complaint->next == 0) {
- complaint->next = complaint_root->next;
- complaint_root->next = complaint;
- }
- if (complaint->counter > stop_whining)
- return 0;
- wrap_here ("");
- if (!info_verbose) {
- puts_filtered ("During symbol reading...");
- }
- printf_filtered (complaint->message, val);
- puts_filtered ("...");
- wrap_here("");
- if (!info_verbose)
- puts_filtered ("\n");
- return 1;
+ return NULL;
}
-/* Clear out all complaint counters that have ever been incremented. */
+/* Function: list_overlays_command
+ Print a list of mapped sections and their PC ranges */
void
-clear_complaints ()
+list_overlays_command (args, from_tty)
+ char *args;
+ int from_tty;
{
- struct complaint *p;
+ int nmapped = 0;
+ struct objfile *objfile;
+ struct obj_section *osect;
- for (p = complaint_root->next; p != complaint_root; p = p->next)
- p->counter = 0;
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (overlay_is_mapped (osect))
+ {
+ const char *name;
+ bfd_vma lma, vma;
+ int size;
+
+ vma = bfd_section_vma (objfile->obfd, osect->the_bfd_section);
+ lma = bfd_section_lma (objfile->obfd, osect->the_bfd_section);
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
+
+ printf_filtered ("Section %s, loaded at ", name);
+ print_address_numeric (lma, 1, stdout);
+ puts_filtered (" - ");
+ print_address_numeric (lma + size, 1, stdout);
+ printf_filtered (", mapped at ");
+ print_address_numeric (vma, 1, stdout);
+ puts_filtered (" - ");
+ print_address_numeric (vma + size, 1, stdout);
+ puts_filtered ("\n");
+
+ nmapped ++;
+ }
+ if (nmapped == 0)
+ printf_filtered ("No sections are mapped.\n");
}
-\f
-/* clear_symtab_users_once:
- This function is run after symbol reading, or from a cleanup.
- If an old symbol table was obsoleted, the old symbol table
- has been blown away, but the other GDB data structures that may
- reference it have not yet been cleared or re-directed. (The old
- symtab was zapped, and the cleanup queued, in free_named_symtab()
- below.)
+/* Function: map_overlay_command
+ Mark the named section as mapped (ie. residing at its VMA address). */
- This function can be queued N times as a cleanup, or called
- directly; it will do all the work the first time, and then will be a
- no-op until the next time it is queued. This works by bumping a
- counter at queueing time. Much later when the cleanup is run, or at
- the end of symbol processing (in case the cleanup is discarded), if
- the queued count is greater than the "done-count", we do the work
- and set the done-count to the queued count. If the queued count is
- less than or equal to the done-count, we just ignore the call. This
- is needed because reading a single .o file will often replace many
- symtabs (one per .h file, for example), and we don't want to reset
- the breakpoints N times in the user's face.
+void
+map_overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ struct objfile *objfile, *objfile2;
+ struct obj_section *sec, *sec2;
+ asection *bfdsec;
+
+ if (!overlay_debugging)
+ error ("Overlay debugging not enabled. Use the 'OVERLAY ON' command.");
+
+ if (args == 0 || *args == 0)
+ error ("Argument required: name of an overlay section");
+
+ /* First, find a section matching the user supplied argument */
+ ALL_OBJSECTIONS (objfile, sec)
+ if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+ {
+ /* Now, check to see if the section is an overlay. */
+ bfdsec = sec->the_bfd_section;
+ if (!section_is_overlay (bfdsec))
+ continue; /* not an overlay section */
+
+ /* Mark the overlay as "mapped" */
+ sec->ovly_mapped = 1;
+
+ /* Next, make a pass and unmap any sections that are
+ overlapped by this new section: */
+ ALL_OBJSECTIONS (objfile2, sec2)
+ if (sec2->ovly_mapped &&
+ sec != sec2 &&
+ sec->the_bfd_section != sec2->the_bfd_section &&
+ (pc_in_mapped_range (sec2->addr, sec->the_bfd_section) ||
+ pc_in_mapped_range (sec2->endaddr, sec->the_bfd_section)))
+ {
+ if (info_verbose)
+ printf_filtered ("Note: section %s unmapped by overlap\n",
+ bfd_section_name (objfile->obfd,
+ sec2->the_bfd_section));
+ sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2 */
+ }
+ return;
+ }
+ error ("No overlay section called %s", args);
+}
- The reason we both queue a cleanup, and call it directly after symbol
- reading, is because the cleanup protects us in case of errors, but is
- discarded if symbol reading is successful. */
+/* Function: unmap_overlay_command
+ Mark the overlay section as unmapped
+ (ie. resident in its LMA address range, rather than the VMA range). */
-static int clear_symtab_users_queued;
-static int clear_symtab_users_done;
+void
+unmap_overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ struct objfile *objfile;
+ struct obj_section *sec;
+
+ if (!overlay_debugging)
+ error ("Overlay debugging not enabled. Use the 'OVERLAY ON' command.");
+
+ if (args == 0 || *args == 0)
+ error ("Argument required: name of an overlay section");
+
+ /* First, find a section matching the user supplied argument */
+ ALL_OBJSECTIONS (objfile, sec)
+ if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+ {
+ if (!sec->ovly_mapped)
+ error ("Section %s is not mapped", args);
+ sec->ovly_mapped = 0;
+ return;
+ }
+ error ("No overlay section called %s", args);
+}
+
+/* Function: overlay_auto_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
static void
-clear_symtab_users_once ()
+overlay_auto_command (args, from_tty)
+ char *args;
+ int from_tty;
{
- /* Enforce once-per-`do_cleanups'-semantics */
- if (clear_symtab_users_queued <= clear_symtab_users_done)
- return;
- clear_symtab_users_done = clear_symtab_users_queued;
+ overlay_debugging = -1;
+ if (info_verbose)
+ printf_filtered ("Automatic overlay debugging enabled.");
+}
- printf ("Resetting debugger state after updating old symbol tables\n");
+/* Function: overlay_manual_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
- /* Someday, we should do better than this, by only blowing away
- the things that really need to be blown. */
- clear_value_history ();
- clear_displays ();
- clear_internalvars ();
- breakpoint_re_set ();
- set_default_breakpoint (0, 0, 0, 0);
- current_source_symtab = 0;
+static void
+overlay_manual_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ overlay_debugging = 1;
+ if (info_verbose)
+ printf_filtered ("Overlay debugging enabled.");
}
-/* Delete the specified psymtab, and any others that reference it. */
+/* Function: overlay_off_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
static void
-cashier_psymtab (pst)
- struct partial_symtab *pst;
+overlay_off_command (args, from_tty)
+ char *args;
+ int from_tty;
{
- struct partial_symtab *ps, *pprev;
- int i;
+ overlay_debugging = 0;
+ if (info_verbose)
+ printf_filtered ("Overlay debugging disabled.");
+}
- /* Find its previous psymtab in the chain */
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- if (ps == pst)
- break;
- pprev = ps;
- }
+static void
+overlay_load_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ if (target_overlay_update)
+ (*target_overlay_update) (NULL);
+ else
+ error ("This target does not know how to read its overlay state.");
+}
- if (ps) {
- /* Unhook it from the chain. */
- if (ps == partial_symtab_list)
- partial_symtab_list = ps->next;
- else
- pprev->next = ps->next;
+/* Function: overlay_command
+ A place-holder for a mis-typed command */
- /* FIXME, we can't conveniently deallocate the entries in the
- partial_symbol lists (global_psymbols/static_psymbols) that
- this psymtab points to. These just take up space until all
- the psymtabs are reclaimed. Ditto the dependencies list and
- filename, which are all in the psymbol_obstack. */
+/* Command list chain containing all defined "overlay" subcommands. */
+struct cmd_list_element *overlaylist;
- /* We need to cashier any psymtab that has this one as a dependency... */
-again:
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- for (i = 0; i < ps->number_of_dependencies; i++) {
- if (ps->dependencies[i] == pst) {
- cashier_psymtab (ps);
- goto again; /* Must restart, chain has been munged. */
- }
- }
- }
- }
+static void
+overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered
+ ("\"overlay\" must be followed by the name of an overlay command.\n");
+ help_list (overlaylist, "overlay ", -1, gdb_stdout);
}
-/* If a symtab or psymtab for filename NAME is found, free it along
- with any dependent breakpoints, displays, etc.
- Used when loading new versions of object modules with the "add-file"
- command. This is only called on the top-level symtab or psymtab's name;
- it is not called for subsidiary files such as .h files.
- Return value is 1 if we blew away the environment, 0 if not.
+/* Target Overlays for the "Simplest" overlay manager:
- FIXME. I think this is not the best way to do this. We should
- work on being gentler to the environment while still cleaning up
- all stray pointers into the freed symtab. */
+ This is GDB's default target overlay layer. It works with the
+ minimal overlay manager supplied as an example by Cygnus. The
+ entry point is via a function pointer "target_overlay_update",
+ so targets that use a different runtime overlay manager can
+ substitute their own overlay_update function and take over the
+ function pointer.
-int
-free_named_symtabs (name)
- char *name;
-{
- register struct symtab *s;
- register struct symtab *prev;
- register struct partial_symtab *ps;
- struct blockvector *bv;
- int blewit = 0;
+ The overlay_update function pokes around in the target's data structures
+ to see what overlays are mapped, and updates GDB's overlay mapping with
+ this information.
- /* Some symbol formats have trouble providing file names... */
- if (name == 0 || *name == '\0')
- return 0;
+ In this simple implementation, the target data structures are as follows:
+ unsigned _novlys; /# number of overlay sections #/
+ unsigned _ovly_table[_novlys][4] = {
+ {VMA, SIZE, LMA, MAPPED}, /# one entry per overlay section #/
+ {..., ..., ..., ...},
+ }
+ unsigned _novly_regions; /# number of overlay regions #/
+ unsigned _ovly_region_table[_novly_regions][3] = {
+ {VMA, SIZE, MAPPED_TO_LMA}, /# one entry per overlay region #/
+ {..., ..., ...},
+ }
+ These functions will attempt to update GDB's mappedness state in the
+ symbol section table, based on the target's mappedness state.
+
+ To do this, we keep a cached copy of the target's _ovly_table, and
+ attempt to detect when the cached copy is invalidated. The main
+ entry point is "simple_overlay_update(SECT), which looks up SECT in
+ the cached table and re-reads only the entry for that section from
+ the target (whenever possible).
+ */
+
+/* Cached, dynamically allocated copies of the target data structures: */
+static unsigned (*cache_ovly_table)[4] = 0;
+#if 0
+static unsigned (*cache_ovly_region_table)[3] = 0;
+#endif
+static unsigned cache_novlys = 0;
+#if 0
+static unsigned cache_novly_regions = 0;
+#endif
+static CORE_ADDR cache_ovly_table_base = 0;
+#if 0
+static CORE_ADDR cache_ovly_region_table_base = 0;
+#endif
+enum ovly_index { VMA, SIZE, LMA, MAPPED};
+#define TARGET_LONG_BYTES (TARGET_LONG_BIT / TARGET_CHAR_BIT)
- /* Look for a psymtab with the specified name. */
+/* Throw away the cached copy of _ovly_table */
+static void
+simple_free_overlay_table ()
+{
+ if (cache_ovly_table)
+ free(cache_ovly_table);
+ cache_novlys = 0;
+ cache_ovly_table = NULL;
+ cache_ovly_table_base = 0;
+}
-again2:
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- if (!strcmp (name, ps->filename)) {
- cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
- goto again2; /* Must restart, chain has been munged */
- }
- }
+#if 0
+/* Throw away the cached copy of _ovly_region_table */
+static void
+simple_free_overlay_region_table ()
+{
+ if (cache_ovly_region_table)
+ free(cache_ovly_region_table);
+ cache_novly_regions = 0;
+ cache_ovly_region_table = NULL;
+ cache_ovly_region_table_base = 0;
+}
+#endif
- /* Look for a symtab with the specified name. */
+/* Read an array of ints from the target into a local buffer.
+ Convert to host order. int LEN is number of ints */
+static void
+read_target_long_array (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ unsigned int *myaddr;
+ int len;
+{
+ char *buf = alloca (len * TARGET_LONG_BYTES);
+ int i;
- for (s = symtab_list; s; s = s->next)
+ read_memory (memaddr, buf, len * TARGET_LONG_BYTES);
+ for (i = 0; i < len; i++)
+ myaddr[i] = extract_unsigned_integer (TARGET_LONG_BYTES * i + buf,
+ TARGET_LONG_BYTES);
+}
+
+/* Find and grab a copy of the target _ovly_table
+ (and _novlys, which is needed for the table's size) */
+static int
+simple_read_overlay_table ()
+{
+ struct minimal_symbol *msym;
+
+ simple_free_overlay_table ();
+ msym = lookup_minimal_symbol ("_novlys", 0, 0);
+ if (msym != NULL)
+ cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+ else
+ return 0; /* failure */
+ cache_ovly_table = (void *) xmalloc (cache_novlys * sizeof(*cache_ovly_table));
+ if (cache_ovly_table != NULL)
{
- if (!strcmp (name, s->filename))
- break;
- prev = s;
+ msym = lookup_minimal_symbol ("_ovly_table", 0, 0);
+ if (msym != NULL)
+ {
+ cache_ovly_table_base = SYMBOL_VALUE_ADDRESS (msym);
+ read_target_long_array (cache_ovly_table_base,
+ (int *) cache_ovly_table,
+ cache_novlys * 4);
+ }
+ else
+ return 0; /* failure */
}
+ else
+ return 0; /* failure */
+ return 1; /* SUCCESS */
+}
- if (s)
+#if 0
+/* Find and grab a copy of the target _ovly_region_table
+ (and _novly_regions, which is needed for the table's size) */
+static int
+simple_read_overlay_region_table ()
+{
+ struct minimal_symbol *msym;
+
+ simple_free_overlay_region_table ();
+ msym = lookup_minimal_symbol ("_novly_regions", 0, 0);
+ if (msym != NULL)
+ cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+ else
+ return 0; /* failure */
+ cache_ovly_region_table = (void *) xmalloc (cache_novly_regions * 12);
+ if (cache_ovly_region_table != NULL)
{
- if (s == symtab_list)
- symtab_list = s->next;
- else
- prev->next = s->next;
+ msym = lookup_minimal_symbol ("_ovly_region_table", 0, 0);
+ if (msym != NULL)
+ {
+ cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
+ read_target_long_array (cache_ovly_region_table_base,
+ (int *) cache_ovly_region_table,
+ cache_novly_regions * 3);
+ }
+ else
+ return 0; /* failure */
+ }
+ else
+ return 0; /* failure */
+ return 1; /* SUCCESS */
+}
+#endif
- /* For now, queue a delete for all breakpoints, displays, etc., whether
- or not they depend on the symtab being freed. This should be
- changed so that only those data structures affected are deleted. */
+/* Function: simple_overlay_update_1
+ A helper function for simple_overlay_update. Assuming a cached copy
+ of _ovly_table exists, look through it to find an entry whose vma,
+ lma and size match those of OSECT. Re-read the entry and make sure
+ it still matches OSECT (else the table may no longer be valid).
+ Set OSECT's mapped state to match the entry. Return: 1 for
+ success, 0 for failure. */
- /* But don't delete anything if the symtab is empty.
- This test is necessary due to a bug in "dbxread.c" that
- causes empty symtabs to be created for N_SO symbols that
- contain the pathname of the object file. (This problem
- has been fixed in GDB 3.9x). */
+static int
+simple_overlay_update_1 (osect)
+ struct obj_section *osect;
+{
+ int i, size;
- bv = BLOCKLIST (s);
- if (BLOCKLIST_NBLOCKS (bv) > 2
- || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
- || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
- {
- complain (&oldsyms_complaint, name);
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ for (i = 0; i < cache_novlys; i++)
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */)
+ {
+ read_target_long_array (cache_ovly_table_base + i * TARGET_LONG_BYTES,
+ (int *) cache_ovly_table[i], 4);
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */)
+ {
+ osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+ return 1;
+ }
+ else /* Warning! Warning! Target's ovly table has changed! */
+ return 0;
+ }
+ return 0;
+}
- clear_symtab_users_queued++;
- make_cleanup (clear_symtab_users_once, 0);
- blewit = 1;
- } else {
- complain (&empty_symtab_complaint, name);
- }
+/* Function: simple_overlay_update
+ If OSECT is NULL, then update all sections' mapped state
+ (after re-reading the entire target _ovly_table).
+ If OSECT is non-NULL, then try to find a matching entry in the
+ cached ovly_table and update only OSECT's mapped state.
+ If a cached entry can't be found or the cache isn't valid, then
+ re-read the entire cache, and go ahead and update all sections. */
- free_symtab (s);
+static void
+simple_overlay_update (osect)
+ struct obj_section *osect;
+{
+ struct objfile *objfile;
+
+ /* Were we given an osect to look up? NULL means do all of them. */
+ if (osect)
+ /* Have we got a cached copy of the target's overlay table? */
+ if (cache_ovly_table != NULL)
+ /* Does its cached location match what's currently in the symtab? */
+ if (cache_ovly_table_base ==
+ SYMBOL_VALUE_ADDRESS (lookup_minimal_symbol ("_ovly_table", 0, 0)))
+ /* Then go ahead and try to look up this single section in the cache */
+ if (simple_overlay_update_1 (osect))
+ /* Found it! We're done. */
+ return;
+
+ /* Cached table no good: need to read the entire table anew.
+ Or else we want all the sections, in which case it's actually
+ more efficient to read the whole table in one block anyway. */
+
+ if (simple_read_overlay_table () == 0) /* read failed? No table? */
+ {
+ warning ("Failed to read the target overlay mapping table.");
+ return;
}
- else
- /* It is still possible that some breakpoints will be affected
- even though no symtab was found, since the file might have
- been compiled without debugging, and hence not be associated
- with a symtab. In order to handle this correctly, we would need
- to keep a list of text address ranges for undebuggable files.
- For now, we do nothing, since this is a fairly obscure case. */
- ;
-
- /* FIXME, what about the misc function vector? */
- return blewit;
+ /* Now may as well update all sections, even if only one was requested. */
+ ALL_OBJSECTIONS (objfile, osect)
+ if (section_is_overlay (osect->the_bfd_section))
+ {
+ int i, size;
+
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ for (i = 0; i < cache_novlys; i++)
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */)
+ { /* obj_section matches i'th entry in ovly_table */
+ osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+ break; /* finished with inner for loop: break out */
+ }
+ }
}
-\f
+
+
void
_initialize_symfile ()
{
-
- add_com ("symbol-file", class_files, symbol_file_command,
- "Load symbol table from executable file FILE.\n\
+ struct cmd_list_element *c;
+
+ c = add_cmd ("symbol-file", class_files, symbol_file_command,
+ "Load symbol table from executable file FILE.\n\
The `file' command can also load symbol tables, as well as setting the file\n\
-to execute.");
-
- add_com ("add-symbol-file", class_files, add_symbol_file_command,
- "Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
-The second argument provides the starting address of the file's text.");
-
- add_com ("load", class_files, load_command,
+to execute.", &cmdlist);
+ c->completer = filename_completer;
+
+ c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
+ "Usage: add-symbol-file FILE ADDR\n\
+Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
+ADDR is the starting address of the file's text.",
+ &cmdlist);
+ c->completer = filename_completer;
+
+ c = add_cmd ("add-shared-symbol-files", class_files,
+ add_shared_symbol_files_command,
+ "Load the symbols from shared objects in the dynamic linker's link map.",
+ &cmdlist);
+ c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
+ &cmdlist);
+
+ c = add_cmd ("load", class_files, load_command,
"Dynamically load FILE into the running program, and record its symbols\n\
-for access from GDB.");
+for access from GDB.", &cmdlist);
+ c->completer = filename_completer;
add_show_from_set
- (add_set_cmd ("complaints", class_support, var_uinteger,
- (char *)&stop_whining,
- "Set max number of complaints about incorrect symbols.",
+ (add_set_cmd ("symbol-reloading", class_support, var_boolean,
+ (char *)&symbol_reloading,
+ "Set dynamic symbol table reloading multiple times in one run.",
&setlist),
&showlist);
- obstack_init (symbol_obstack);
- obstack_init (psymbol_obstack);
+ add_prefix_cmd ("overlay", class_support, overlay_command,
+ "Commands for debugging overlays.", &overlaylist,
+ "overlay ", 0, &cmdlist);
+
+ add_com_alias ("ovly", "overlay", class_alias, 1);
+ add_com_alias ("ov", "overlay", class_alias, 1);
+
+ add_cmd ("map-overlay", class_support, map_overlay_command,
+ "Assert that an overlay section is mapped.", &overlaylist);
+
+ add_cmd ("unmap-overlay", class_support, unmap_overlay_command,
+ "Assert that an overlay section is unmapped.", &overlaylist);
+
+ add_cmd ("list-overlays", class_support, list_overlays_command,
+ "List mappings of overlay sections.", &overlaylist);
+
+ add_cmd ("manual", class_support, overlay_manual_command,
+ "Enable overlay debugging.", &overlaylist);
+ add_cmd ("off", class_support, overlay_off_command,
+ "Disable overlay debugging.", &overlaylist);
+ add_cmd ("auto", class_support, overlay_auto_command,
+ "Enable automatic overlay debugging.", &overlaylist);
+ add_cmd ("load-target", class_support, overlay_load_command,
+ "Read the overlay mapping state from the target.", &overlaylist);
+
+ /* Filename extension to source language lookup table: */
+ init_filename_language_table ();
+ c = add_set_cmd ("extension-language", class_files, var_string_noescape,
+ (char *) &ext_args,
+ "Set mapping between filename extension and source language.\n\
+Usage: set extension-language .foo bar",
+ &setlist);
+ c->function.cfunc = set_ext_lang_command;
+
+ add_info ("extensions", info_ext_lang_command,
+ "All filename extensions associated with a source language.");
}
projects / thirdparty / binutils-gdb.git / blobdiff