-# Copyright (C) 1998 Free Software Foundation, Inc.
+# Copyright 1998-2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Michael Snyder (msnyder@cygnus.com)
load_lib "trace-support.exp";
-if $tracelevel then {
- strace $tracelevel
-}
-
-set prms_id 0
-set bug_id 0
gdb_exit
gdb_start
-if [istarget "m68k-*-elf"] then {
- set srcfile gdb_c_test.c
- set binfile [board_info target d490_binfile];
-} else {
- set testfile "actions"
- set srcfile ${testfile}.c
- set binfile $objdir/$subdir/$testfile
- if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
- executable {debug additional_flags="-gdwarf"}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
- }
+standard_testfile actions.c
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+ executable {debug nowarnings}] != "" } {
+ untested passcount.exp
+ return -1
}
gdb_reinitialize_dir $srcdir/$subdir
# If testing on a remote host, download the source file.
-remote_download host $srcdir/$subdir/$srcfile
+# remote_download host $srcdir/$subdir/$srcfile
gdb_file_cmd $binfile
# 4.1 passcount of specified tracepoint
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target." \
"4.1a: set three tracepoints, passcounts all zero"
gdb_test "passcount 2 $trcpt1" \
"4.1b: set 1st tracepoint's passcount to two"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 2 .
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target." \
"4.1c: verify 1st tracepoint's passcount set to two"
gdb_test "passcount 4 $trcpt2" \
"4.1d: set 2nd tracepoint's passcount to four"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 2 .
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target." \
"4.1c: verify 2nd tracepoint's passcount set to four"
# 4.2 passcount of last (default) tracepoint
"4.2b: set last (default) tp's passcount to six"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+6\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 2 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 6 .*" \
"4.2b: verify last (default) tp's passcount set to six"
# 4.3 run until stopped explicitly by user
"4.4a: reset last (default) tp's passcount to seven"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 2 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 7 .*" \
"4.4a: verify reset last (default) tp's passcount to seven"
gdb_test "passcount 5 $trcpt2" \
"4.4b: reset second tracepoint's passcount to five"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+5\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 2 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 5 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 7 .*" \
"4.4c: verify reset second tracepoint's passcount to five"
# 4.20 <FIXME test number> passcount for "all"
"4.20a: set all three passcounts to three"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 3 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 3 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 3 .*" \
"4.20a: set all three passcounts to three"
gdb_test "passcount 4 all" \
"4.20a: reset all three passcounts to four"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*" \
"4.20b: reset all three passcounts to four"
# 4.5 Verify trace stops on first "satisfied" passcount
"4.6: set passcount to zero"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .
+\[\t \]+not installed on target.
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .
+\[\t \]+not installed on target." \
"4.6: set passcount to zero"
# 4.7 (test a very large passcount)
"4.7: set passcount to large number (32767)"
gdb_test "info tracepoints" \
- "Num Enb Address PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+32767\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 32767 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*
+\[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+.
+\[\t \]+pass count 4 .*" \
"4.7: set passcount to large number (32767)"
# 4.8 set passcount for invalid tracepoint
# 4.9 help passcount
gdb_test "help passcount" "Set the passcount for a tracepoint.*" \
"4.9: help passcount"
-
projects / thirdparty / binutils-gdb.git / blobdiff