###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
+# Copyright (C) 2007-2011 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
require "${General::swroot}/countries.pl";
# enable only the following on debugging purpose
-use warnings;
-use CGI::Carp 'fatalsToBrowser';
+#use warnings;
+#use CGI::Carp 'fatalsToBrowser';
#workaround to suppress a warning when a variable is used only once
my @dummy = ( ${Header::colourgreen} );
undef (@dummy);
}
+###
+# m.a.d net2net
+###
+
+sub validdotmask
+{
+ my $ipdotmask = $_[0];
+ if (&General::validip($ipdotmask)) { return 0; }
+ if (!($ipdotmask =~ /^(.*?)\/(.*?)$/)) { }
+ my $mask = $2;
+ if (($mask =~ /\./ )) { return 0; }
+ return 1;
+}
+
+
+
#hier die refresh page
if ( -e "${General::swroot}/ovpn/gencanow") {
my $refresh = '';
}
###
-# m.a.d Save net2net server config
+# m.a.d net2net
###
if ($cgiparams{'ACTION'} eq $Lang::tr{'save'} && $cgiparams{'TYPE'} eq 'net' && $cgiparams{'SIDE'} eq 'server')
open(SERVERCONF, ">${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Unable to open ${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf: $!";
flock SERVERCONF, 2;
- print SERVERCONF "# n2n Open VPN Server Config by ummeegge und m.a.d\n";
+ print SERVERCONF "# IPFire n2n Open VPN Server Config by ummeegge und m.a.d\n";
print SERVERCONF "\n";
- print SERVERCONF "# User Sicherheit\n";
+ print SERVERCONF "# User Security\n";
print SERVERCONF "user nobody\n";
print SERVERCONF "group nobody\n";
print SERVERCONF "persist-tun\n";
print SERVERCONF "persist-key\n";
- print SERVERCONF "\n";
- print SERVERCONF "# IP/DNS fuer das Server Gateway - g2g Mode\n";
+ print SERVERCONF "script-security 2\n";
+ print SERVERCONF "# IP/DNS for remote Server Gateway\n";
print SERVERCONF "remote $cgiparams{'REMOTE'}\n";
- print SERVERCONF "\n";
- print SERVERCONF "# IP Adressen des VPN Tunnels\n";
+ print SERVERCONF "float\n";
+ print SERVERCONF "# IP adresses of the VPN Subnet\n";
print SERVERCONF "ifconfig $ovsubnet.1 $ovsubnet.2\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Netzwerk auf dem Client Gateway\n";
+ print SERVERCONF "# Client Gateway Network\n";
print SERVERCONF "route @remsubnet[0] @remsubnet[1]\n";
- print SERVERCONF "# Device fuer den Tunnel\n";
+ print SERVERCONF "# tun Device\n";
print SERVERCONF "dev tun\n";
- print SERVERCONF "\n";
- print SERVERCONF "#Port und Protokoll\n";
+ print SERVERCONF "# Port and Protokol\n";
print SERVERCONF "port $cgiparams{'DEST_PORT'}\n";
- print SERVERCONF "proto $cgiparams{'PROTOCOL'}\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Paketgroessen\n";
+
+ if ($cgiparams{'PROTOCOL'} eq 'tcp') {
+ print SERVERCONF "proto tcp-server\n";
+ print SERVERCONF "# Packet size\n";
if ($cgiparams{'MTU'} eq '') {$tunmtu = '1400'} else {$tunmtu = $cgiparams{'MTU'}};
- print SERVERCONF "tun-mtu $tunmtu\n";
- if ($cgiparams{'PROTOCOL'} eq 'udp') {
- if ($cgiparams{'FRAGMENT'} eq '') {
- print SERVERCONF "fragment 1300\r\n";
- } else {
- print SERVERCONF "fragment $cgiparams{'FRAGMENT'}\n"
- }
- if ($cgiparams{'MSSFIX'} eq 'on') {
- print SERVERCONF "mssfix\n";
+ print SERVERCONF "tun-mtu $tunmtu\n";
}
+
+ if ($cgiparams{'PROTOCOL'} eq 'udp') {
+ print SERVERCONF "proto udp\n";
+ print SERVERCONF "# Paketsize\n";
+ if ($cgiparams{'MTU'} eq '') {$tunmtu = '1500'} else {$tunmtu = $cgiparams{'MTU'}};
+ print SERVERCONF "tun-mtu $tunmtu\n";
+ if ($cgiparams{'FRAGMENT'} ne '') {print SERVERCONF "fragment $cgiparams{'FRAGMENT'}\n";}
+ if ($cgiparams{'MSSFIX'} eq 'on') {print SERVERCONF "mssfix\n";}
}
- print SERVERCONF "\n";
- print SERVERCONF "# Auth Server\n";
+
+ print SERVERCONF "# Auth. Server\n";
print SERVERCONF "tls-server\n";
print SERVERCONF "ca ${General::swroot}/ovpn/ca/cacert.pem\n";
print SERVERCONF "cert ${General::swroot}/ovpn/certs/servercert.pem\n";
print SERVERCONF "key ${General::swroot}/ovpn/certs/serverkey.pem\n";
print SERVERCONF "dh ${General::swroot}/ovpn/ca/dh1024.pem\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Verschluesselung\n";
+ print SERVERCONF "# Cipher\n";
print SERVERCONF "cipher AES-256-CBC\n";
if ($cgiparams{'COMPLZO'} eq 'on') {
- print SERVERCONF "# Kompression einschalten\n";
+ print SERVERCONF "# Enable Compression\n";
print SERVERCONF "comp-lzo\r\n";
- print SERVERCONF "#\n";
- }
- print SERVERCONF "# Debug Level setzen\n";
+ }
+ print SERVERCONF "# Debug Level\n";
print SERVERCONF "verb 3\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Tunnel Ueberwachung\n";
+ print SERVERCONF "# Tunnel check\n";
print SERVERCONF "keepalive 10 60\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Als Daemon starten mit Namen ovpnn2n\n";
+ print SERVERCONF "# Start as daemon\n";
print SERVERCONF "daemon $cgiparams{'NAME'}n2n\n";
print SERVERCONF "writepid /var/run/$cgiparams{'NAME'}n2n.pid\n";
- print SERVERCONF "\n";
- print SERVERCONF "# Management Interface aktivieren\n";
+ print SERVERCONF "# Activate Management Interface and Port\n";
print SERVERCONF "#management localhost 4711\n";
close(SERVERCONF);
}
###
-# m.a.d Save net2net client config
+# m.a.d net2net
###
+
if ($cgiparams{'ACTION'} eq $Lang::tr{'save'} && $cgiparams{'TYPE'} eq 'net' && $cgiparams{'SIDE'} eq 'client')
{
my @ovsubnettemp = split(/\./,$cgiparams{'OVPN_SUBNET'});
open(CLIENTCONF, ">${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Unable to open ${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf: $!";
flock CLIENTCONF, 2;
- print CLIENTCONF "# rewritten n2n Open VPN Client Config by ummeegge und m.a.d\n";
+ print CLIENTCONF "# IPFire rewritten n2n Open VPN Client Config by ummeegge und m.a.d\n";
print CLIENTCONF "#\n";
- print CLIENTCONF "# User Sicherheit\n";
+ print CLIENTCONF "# User Security\n";
print CLIENTCONF "user nobody\n";
print CLIENTCONF "group nobody\n";
print CLIENTCONF "persist-tun\n";
print CLIENTCONF "persist-key\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# IP/DNS fuer das Server Gateway - g2g Mode\n";
+ print CLIENTCONF "script-security 2\n";
+ print CLIENTCONF "# IP/DNS for remote Server Gateway\n";
print CLIENTCONF "remote $cgiparams{'REMOTE'}\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# IP Adressen des VPN Tunnels\n";
+ print CLIENTCONF "float\n";
+ print CLIENTCONF "# IP adresses of the VPN Subnet\n";
print CLIENTCONF "ifconfig $ovsubnet.2 $ovsubnet.1\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Netzwerk auf dem Server Gateway\n";
- print CLIENTCONF "route @remsubnet[0]/@remsubnet[1]\n";
- print CLIENTCONF "# Device fuer den Tunnel\n";
+ print CLIENTCONF "# Server Gateway Network\n";
+ print CLIENTCONF "route @remsubnet[0] @remsubnet[1]\n";
+ print CLIENTCONF "# tun Device\n";
print CLIENTCONF "dev tun\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "#Port und Protokoll\n";
+ print CLIENTCONF "# Port and Protokol\n";
print CLIENTCONF "port $cgiparams{'DEST_PORT'}\n";
- print CLIENTCONF "proto $cgiparams{'PROTOCOL'}\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Paketgroessen\n";
+
+ if ($cgiparams{'PROTOCOL'} eq 'tcp') {
+ print CLIENTCONF "proto tcp-client\n";
+ print CLIENTCONF "# Packet size\n";
if ($cgiparams{'MTU'} eq '') {$tunmtu = '1400'} else {$tunmtu = $cgiparams{'MTU'}};
- print CLIENTCONF "tun-mtu $tunmtu\n";
- if ($cgiparams{'PROTOCOL'} eq 'udp') {
- if ($cgiparams{'FRAGMENT'} eq '') {
- print CLIENTCONF "fragment 1300\r\n";
- } else {
- print CLIENTCONF "fragment $cgiparams{'FRAGMENT'}\n"
- }
- if ($cgiparams{'MSSFIX'} eq 'on') {
- print CLIENTCONF "mssfix\n";
+ print CLIENTCONF "tun-mtu $tunmtu\n";
+ print CLIENTCONF "ns-cert-type server\n";
}
+
+ if ($cgiparams{'PROTOCOL'} eq 'udp') {
+ print CLIENTCONF "proto udp\n";
+ print CLIENTCONF "# Paketsize\n";
+ if ($cgiparams{'MTU'} eq '') {$tunmtu = '1500'} else {$tunmtu = $cgiparams{'MTU'}};
+ print CLIENTCONF "tun-mtu $tunmtu\n";
+ if ($cgiparams{'FRAGMENT'} ne '') {print CLIENTCONF "fragment $cgiparams{'FRAGMENT'}\n";}
+ if ($cgiparams{'MSSFIX'} eq 'on') {print CLIENTCONF "mssfix\n";}
}
- print CLIENTCONF "#\n";
+
print CLIENTCONF "# Auth. Client\n";
print CLIENTCONF "tls-client\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Verschluesselung\n";
+ print CLIENTCONF "# Cipher\n";
print CLIENTCONF "cipher AES-256-CBC\n";
print CLIENTCONF "pkcs12 ${General::swroot}/ovpn/certs/$cgiparams{'NAME'}.p12\r\n";
- print CLIENTCONF "#\n";
if ($cgiparams{'COMPLZO'} eq 'on') {
- print CLIENTCONF "# Kompression einschalten\n";
+ print CLIENTCONF "# Enable Compression\n";
print CLIENTCONF "comp-lzo\r\n";
- print CLIENTCONF "#\n";
- }
- print CLIENTCONF "#\n";
+ }
print CLIENTCONF "# Debug Level\n";
print CLIENTCONF "verb 3\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Tunnel Ueberwachung\n";
+ print CLIENTCONF "# Tunnel check\n";
print CLIENTCONF "keepalive 10 60\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Als Daemon starten\n";
+ print CLIENTCONF "# Start as daemon\n";
print CLIENTCONF "daemon $cgiparams{'NAME'}n2n\n";
print CLIENTCONF "writepid /var/run/$cgiparams{'NAME'}n2n.pid\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Management Interface aktivieren\n";
+ print CLIENTCONF "# Activate Management Interface and Port\n";
print CLIENTCONF "# management localhost 4711\n";
close(CLIENTCONF);
}
-###
-# m.a.d Save net2net config end
-###
-
###
### Save main settings
###
###
###
-# m.a.d net2net Anpassung
+# m.a.d net2net
###
}elsif ($cgiparams{'ACTION'} eq $Lang::tr{'toggle enable disable'}) {
my $zippath = "$tempdir/";
###
-# m.a.d net2net DL Client Package
-###
+# m.a.d net2net
+###
if ($confighash{$cgiparams{'KEY'}}[3] eq 'net'){
my @ovsubnettemp = split(/\./,$confighash{$cgiparams{'KEY'}}[27]);
my $ovsubnet = "@ovsubnettemp[0].@ovsubnettemp[1].@ovsubnettemp[2]";
my $tunmtu = '';
+ my @remsubnet = split(/\//,$confighash{$cgiparams{'KEY'}}[8]);
open(CLIENTCONF, ">$tempdir/$clientovpn") or die "Unable to open tempfile: $!";
flock CLIENTCONF, 2;
my $zip = Archive::Zip->new();
- print CLIENTCONF "# n2n Open VPN Client Config by ummeegge und m.a.d\n";
+ print CLIENTCONF "# IPFire n2n Open VPN Client Config by ummeegge und m.a.d\n";
print CLIENTCONF "# \n";
- print CLIENTCONF "# User Sicherheit\n";
+ print CLIENTCONF "# User Security\n";
print CLIENTCONF "user nobody\n";
print CLIENTCONF "group nobody\n";
print CLIENTCONF "persist-tun\n";
print CLIENTCONF "persist-key\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# IP/DNS fuer das Server Gateway - g2g Mode\n";
+ print CLIENTCONF "script-security 2\n";
+ print CLIENTCONF "# IP/DNS for remote Server Gateway\n";
print CLIENTCONF "remote $vpnsettings{'VPN_IP'}\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# IP Adressen des VPN Tunnels\n";
+ print CLIENTCONF "float\n";
+ print CLIENTCONF "# IP adresses of the VPN Subnet\n";
print CLIENTCONF "ifconfig $ovsubnet.2 $ovsubnet.1\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Netzwerk auf dem Server Gateway\n";
- print CLIENTCONF "route $confighash{$cgiparams{'KEY'}}[8]\n";
- print CLIENTCONF "# Device fuer den Tunnel\n";
+ print CLIENTCONF "# Server Gateway Network\n";
+ print CLIENTCONF "route $remsubnet[0] $remsubnet[1]\n";
+ print CLIENTCONF "# tun Device\n";
print CLIENTCONF "dev $vpnsettings{'DDEVICE'}\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "#Port und Protokoll\n";
+ print CLIENTCONF "# Port and Protokoll\n";
print CLIENTCONF "port $confighash{$cgiparams{'KEY'}}[29]\n";
- print CLIENTCONF "proto $confighash{$cgiparams{'KEY'}}[28]\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Paketgroessen\n";
+
+ if ($confighash{$cgiparams{'KEY'}}[28] eq 'tcp') {
+ print CLIENTCONF "proto tcp-client\n";
+ print CLIENTCONF "# Packet size\n";
if ($confighash{$cgiparams{'KEY'}}[31] eq '') {$tunmtu = '1400'} else {$tunmtu = $confighash{$cgiparams{'KEY'}}[31]};
- print CLIENTCONF "tun-mtu $tunmtu\n";
- if ($confighash{$cgiparams{'KEY'}}[28] eq 'udp') {
- if ($cgiparams{'FRAGMENT'} eq '') {
- print CLIENTCONF "fragment 1300\r\n";
- } else {
- print CLIENTCONF "fragment $cgiparams{'FRAGMENT'}\n"
- }
- if ($confighash{$cgiparams{'KEY'}}[23] eq 'on') {
- print CLIENTCONF "mssfix\n";
+ print CLIENTCONF "tun-mtu $tunmtu\n";
+ print CLIENTCONF "ns-cert-type server\n";
}
+
+ if ($confighash{$cgiparams{'KEY'}}[28] eq 'udp') {
+ print CLIENTCONF "proto udp\n";
+ print CLIENTCONF "# Paketsize\n";
+ if ($confighash{$cgiparams{'KEY'}}[31] eq '') {$tunmtu = '1500'} else {$tunmtu = $confighash{$cgiparams{'KEY'}}[31]};
+ print CLIENTCONF "tun-mtu $tunmtu\n";
+ if ($cgiparams{'FRAGMENT'} ne '') {print CLIENTCONF "fragment $cgiparams{'FRAGMENT'}\n";}
+ if ($confighash{$cgiparams{'KEY'}}[23] eq 'on') {print CLIENTCONF "mssfix\n";}
}
- print CLIENTCONF "#\n";
+
print CLIENTCONF "# Auth. Client\n";
print CLIENTCONF "tls-client\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Verschluesselung\n";
+ print CLIENTCONF "# Cipher\n";
print CLIENTCONF "cipher AES-256-CBC\n";
if ($confighash{$cgiparams{'KEY'}}[4] eq 'cert' && -f "${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1].p12") {
print CLIENTCONF "pkcs12 ${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1].p12\r\n";
$zip->addFile( "${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1].p12", "$confighash{$cgiparams{'KEY'}}[1].p12") or die "Can't add file $confighash{$cgiparams{'KEY'}}[1].p12\n";
}
- print CLIENTCONF "#\n";
if ($confighash{$cgiparams{'KEY'}}[30] eq 'on') {
- print CLIENTCONF "# Kompression einschalten\n";
+ print CLIENTCONF "# Enable Compression\n";
print CLIENTCONF "comp-lzo\r\n";
- print CLIENTCONF "#\n";
- }
+ }
print CLIENTCONF "# Debug Level\n";
print CLIENTCONF "verb 3\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Tunnel Ueberwachung\n";
+ print CLIENTCONF "# Tunnel check\n";
print CLIENTCONF "keepalive 10 60\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Als Daemon starten\n";
+ print CLIENTCONF "# Start as daemon\n";
print CLIENTCONF "daemon $confighash{$cgiparams{'KEY'}}[1]n2n\n";
print CLIENTCONF "writepid /var/run/$confighash{$cgiparams{'KEY'}}[1]n2n.pid\n";
- print CLIENTCONF "#\n";
- print CLIENTCONF "# Management Interface aktivieren\n";
+ print CLIENTCONF "# Activate Management Interface and Port\n";
print CLIENTCONF "# management localhost 4711\n";
print CLIENTCONF "# remsub $confighash{$cgiparams{'KEY'}}[11]\n";
$clientovpn = "$confighash{$cgiparams{'KEY'}}[1]-TO-IPFire.ovpn";
###
-# m.a.d net2net DL Client Package end
+# m.a.d net2net
###
open(CLIENTCONF, ">$tempdir/$clientovpn") or die "Unable to open tempfile: $!";
my $temp = `/usr/bin/openssl ca -revoke ${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1]cert.pem -config ${General::swroot}/ovpn/openssl/ovpn.cnf`;
###
-# m.a.d net2net Anpassung
+# m.a.d net2net
###
+
if ($confighash{$cgiparams{'KEY'}}[3] eq 'net') {
my $conffile = glob("${General::swroot}/ovpn/n2nconf/$confighash{$cgiparams{'KEY'}}[1]/$confighash{$cgiparams{'KEY'}}[1].conf");
rmdir ("${General::swroot}/ovpn/n2nconf/$confighash{$cgiparams{'KEY'}}[1]") || die "Kann Verzeichnis nicht loeschen: $!";
}
-###
-# m.a.d net2net Anpassung end
-###
unlink ("${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1]cert.pem");
unlink ("${General::swroot}/ovpn/certs/$confighash{$cgiparams{'KEY'}}[1].p12");
<tr>
<td class='base'>fragment <br></td>
<td><input type='TEXT' name='FRAGMENT' value='$cgiparams{'FRAGMENT'}' size='10' /></td>
- <td>Default: <span class="base">1300</span></td>
- </tr>
+ <td>Default: <span class="base">1300</span></td>
+ </tr>
<tr>
<td class='base'>mssfix</td>
<td><input type='checkbox' name='MSSFIX' $checked{'MSSFIX'}{'on'} /></td>
###
###
-# m.a.d Anpassung wegen upload n2n Package
+# m.a.d net2net
###
} elsif ($cgiparams{'ACTION'} eq $Lang::tr{'add'} && $cgiparams{'TYPE'} eq '') {
&Header::openpage($Lang::tr{'vpn configuration main'}, 1, '');
&Header::openbigbox('100%', 'LEFT', '', '');
&Header::openbox('100%', 'LEFT', $Lang::tr{'connection type'});
+
+if ( -s "${General::swroot}/ovpn/settings") {
+
print <<END
<b>$Lang::tr{'connection type'}:</b><br />
<table><form method='post' ENCTYPE="multipart/form-data">
END
;
+} else {
+ print <<END
+ <b>$Lang::tr{'connection type'}:</b><br />
+ <table><form method='post' ENCTYPE="multipart/form-data">
+ <tr><td><input type='radio' name='TYPE' value='host' checked /></td> <td class='base'>$Lang::tr{'host to net vpn'}</td></tr>
+ <tr><td align='center'><input type='submit' name='ACTION' value='$Lang::tr{'add'}' /></td></tr>
+ </form></table>
+END
+ ;
+
+}
+
&Header::closebox();
&Header::closebigbox();
&Header::closepage();
exit (0);
###
-# m.a.d uploading a IPFire n2n Client package
+# m.a.d net2net
###
} elsif (($cgiparams{'ACTION'} eq $Lang::tr{'add'}) && ($cgiparams{'TYPE'} eq 'net2net')){
goto N2N_ERROR;
}
-###
-# m.a.d prepare imported ipfire net2net data
+###
+# m.a.d net2net
###
my @n2nname = split(/\./,$uplconffilename);
$n2nname[0] =~ s/\n|\r//g;
- if ( !-d "${General::swroot}/ovpn/n2nconf/$n2nname[0]") {
- mkdir("${General::swroot}/ovpn/n2nconf/$n2nname[0]", 0770); }
+ unless(-d "${General::swroot}/ovpn/n2nconf/"){mkdir "${General::swroot}/ovpn/n2nconf", 0755 or die "Unable to create dir $!";}
+ unless(-d "${General::swroot}/ovpn/n2nconf/$n2nname[0]"){mkdir "${General::swroot}/ovpn/n2nconf/$n2nname[0]", 0770 or die "Unable to create dir $!";}
move("$tempdir/$uplconffilename", "${General::swroot}/ovpn/n2nconf/$n2nname[0]/$uplconffilename");
}
move("$tempdir/$uplp12name", "${General::swroot}/ovpn/certs/$uplp12name");
+ chmod 0600, "${General::swroot}/ovpn/certs/$uplp12name";
+
if ($? ne 0) {
$errormessage = "$Lang::tr{'certificate file move failed'}: $!";
unlink ($filename);
my $complzoactive;
my $mssfixactive;
my $n2nfragment;
-my @n2nproto = split(/ /, (grep { /^proto/ } @firen2nconf)[0]);
+my @n2nproto2 = split(/ /, (grep { /^proto/ } @firen2nconf)[0]);
+my @n2nproto = split(/-/, @n2nproto2[1]);
my @n2nport = split(/ /, (grep { /^port/ } @firen2nconf)[0]);
my @n2ntunmtu = split(/ /, (grep { /^tun-mtu/ } @firen2nconf)[0]);
my @n2ncomplzo = grep { /^comp-lzo/ } @firen2nconf;
my @n2nremsub = split(/ /, (grep { /^route/ } @firen2nconf)[0]);
my @n2nlocalsub = split(/ /, (grep { /^# remsub/ } @firen2nconf)[0]);
+
###
# m.a.d delete CR and LF from arrays for this chomp doesnt work
###
$n2novpnsub[0] =~ s/\n|\r//g;
$n2novpnsub[1] =~ s/\n|\r//g;
$n2novpnsub[2] =~ s/\n|\r//g;
-$n2nproto[1] =~ s/\n|\r//g;
+$n2nproto[0] =~ s/\n|\r//g;
$n2nport[1] =~ s/\n|\r//g;
$n2ntunmtu[1] =~ s/\n|\r//g;
$n2nremsub[1] =~ s/\n|\r//g;
+$n2nremsub[2] =~ s/\n|\r//g;
$n2nlocalsub[2] =~ s/\n|\r//g;
$n2nfragment[1] =~ s/\n|\r//g;
chomp ($complzoactive);
chomp ($mssfixactive);
###
-# m.a.d Write n2n config
+# m.a.d net2net
###
###
foreach my $dkey (keys %confighash) {
if ($confighash{$dkey}[1] eq $n2nname[0]) {
$errormessage = $Lang::tr{'a connection with this name already exists'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$n2nname[0]/$n2nname[0].conf") or die "Removing Configfile fail: $!";
+ unlink ("${General::swroot}/ovpn/certs/$n2nname[0].p12") or die "Removing Certfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$n2nname[0]") || die "Removing Directory fail: $!";
goto N2N_ERROR;
}
}
-###
-# Check if RemSubnet is green orange blue
-###
-
-
###
# Check if OpenVPN Subnet is valid
###
foreach my $dkey (keys %confighash) {
if ($confighash{$dkey}[27] eq "$n2novpnsub[0].$n2novpnsub[1].$n2novpnsub[2].0/255.255.255.0") {
$errormessage = 'The OpenVPN Subnet is already in use';
+ unlink ("${General::swroot}/ovpn/n2nconf/$n2nname[0]/$n2nname[0].conf") or die "Removing Configfile fail: $!";
+ unlink ("${General::swroot}/ovpn/certs/$n2nname[0].p12") or die "Removing Certfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$n2nname[0]") || die "Removing Directory fail: $!";
goto N2N_ERROR;
}
}
foreach my $dkey (keys %confighash) {
if ($confighash{$dkey}[29] eq $n2nport[1] ) {
$errormessage = 'The OpenVPN Port is already in use';
+ unlink ("${General::swroot}/ovpn/n2nconf/$n2nname[0]/$n2nname[0].conf") or die "Removing Configfile fail: $!";
+ unlink ("${General::swroot}/ovpn/certs/$n2nname[0].p12") or die "Removing Certfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$n2nname[0]") || die "Removing Directory fail: $!";
goto N2N_ERROR;
}
}
$confighash{$key}[6] = 'client';
$confighash{$key}[8] = $n2nlocalsub[2];
$confighash{$key}[10] = $n2nremote[1];
- $confighash{$key}[11] = $n2nremsub[1];
+ $confighash{$key}[11] = "$n2nremsub[1]/$n2nremsub[2]";
$confighash{$key}[23] = $mssfixactive;
$confighash{$key}[24] = $n2nfragment[1];
$confighash{$key}[25] = 'IPFire n2n Client';
$confighash{$key}[26] = 'red';
$confighash{$key}[27] = "$n2novpnsub[0].$n2novpnsub[1].$n2novpnsub[2].0/255.255.255.0";
- $confighash{$key}[28] = $n2nproto[1];
+ $confighash{$key}[28] = $n2nproto[0];
$confighash{$key}[29] = $n2nport[1];
$confighash{$key}[30] = $complzoactive;
$confighash{$key}[31] = $n2ntunmtu[1];
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'protocol'}</td><td><b>$confighash{$key}[28]</b></td></tr>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'destination port'}:</td><td><b>$confighash{$key}[29]</b></td></tr>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'comp-lzo'}</td><td><b>$confighash{$key}[30]</b></td></tr>
+ <tr><td class='boldbase' nowrap='nowrap'>MSSFIX </td><td><b>$confighash{$key}[23]</b></td></tr>
+ <tr><td class='boldbase' nowrap='nowrap'>Fragment </td><td><b>$confighash{$key}[24]</b></td></tr>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'MTU'}</td><td><b>$confighash{$key}[31]</b></td></tr>
<tr><td> </td><td> </td></tr>
</table>
###
-# m.a.d end uploading a IPFire n2n Client package
+# m.a.d net2net
###
} elsif ($cgiparams{'ACTION'} eq $Lang::tr{'save'}) {
$cgiparams{'REMARK'} = &Header::cleanhtml($cgiparams{'REMARK'});
- if ($cgiparams{'TYPE'} !~ /^(host|net)$/) {
+
+ if ($cgiparams{'TYPE'} !~ /^(host|net)$/) {
$errormessage = $Lang::tr{'connection type is invalid'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
}
if ($cgiparams{'NAME'} !~ /^[a-zA-Z0-9]+$/) {
$errormessage = $Lang::tr{'name must only contain characters'};
- goto VPNCONF_ERROR;
- }
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
+ goto VPNCONF_ERROR;
+ }
if ($cgiparams{'NAME'} =~ /^(host|01|block|private|clear|packetdefault)$/) {
$errormessage = $Lang::tr{'name is invalid'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
}
if (length($cgiparams{'NAME'}) >60) {
$errormessage = $Lang::tr{'name too long'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
}
###
-# n2n Plausi m.a.d
+# m.a.d net2net
###
- if ($cgiparams{'DEST_PORT'} eq $vpnsettings{'DDEST_PORT'}) {
- $errormessage = 'The Destination Port is used by the OpenVPN Server please change';
- goto VPNCONF_ERROR;
+if ($cgiparams{'TYPE'} eq 'net') {
+
+ if ($cgiparams{'DEST_PORT'} eq $vpnsettings{'DDEST_PORT'}) {
+ $errormessage = $Lang::tr{'openvpn destination port used'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ goto VPNCONF_ERROR;
}
if ($cgiparams{'OVPN_SUBNET'} eq $vpnsettings{'DOVPN_SUBNET'}) {
- $errormessage = 'The OpenVPN Subnet is used by the OpenVPN Server please change';
+ $errormessage = $Lang::tr{'openvpn subnet is used'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
goto VPNCONF_ERROR;
}
if (($cgiparams{'PROTOCOL'} eq 'tcp') && ($cgiparams{'MSSFIX'} eq 'on')) {
- $errormessage = 'mssfix only allowed with udp';
+ $errormessage = $Lang::tr{'openvpn mssfix allowed with udp'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
goto VPNCONF_ERROR;
}
if (($cgiparams{'PROTOCOL'} eq 'tcp') && ($cgiparams{'FRAGMENT'} ne '')) {
- $errormessage = 'fragment only allowed with udp';
+ $errormessage = $Lang::tr{'openvpn fragment allowed with udp'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
goto VPNCONF_ERROR;
}
-
-###
-# n2n Plausi m.a.d
-###
+ if ( &validdotmask ($cgiparams{'LOCAL_SUBNET'})) {
+ $errormessage = $Lang::tr{'openvpn prefix local subnet'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ goto VPNCONF_ERROR;
+ }
+
+ if ( &validdotmask ($cgiparams{'OVPN_SUBNET'})) {
+ $errormessage = $Lang::tr{'openvpn prefix openvpn subnet'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ goto VPNCONF_ERROR;
+ }
+
+ if ( &validdotmask ($cgiparams{'REMOTE_SUBNET'})) {
+ $errormessage = $Lang::tr{'openvpn prefix remote subnet'};
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ goto VPNCONF_ERROR;
+ }
+}
# if (($cgiparams{'TYPE'} eq 'net') && ($cgiparams{'SIDE'} !~ /^(left|right)$/)) {
# $errormessage = $Lang::tr{'ipfire side is invalid'};
foreach my $key (keys %confighash) {
if ($confighash{$key}[1] eq $cgiparams{'NAME'}) {
$errormessage = $Lang::tr{'a connection with this name already exists'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
}
}
if (($cgiparams{'TYPE'} eq 'net') && (! $cgiparams{'REMOTE'})) {
$errormessage = $Lang::tr{'invalid input for remote host/ip'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
}
if (! &General::validip($cgiparams{'REMOTE'})) {
if (! &General::validfqdn ($cgiparams{'REMOTE'})) {
$errormessage = $Lang::tr{'invalid input for remote host/ip'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;
} else {
if (&valid_dns_host($cgiparams{'REMOTE'})) {
$warnmessage = "$Lang::tr{'check vpn lr'} $cgiparams{'REMOTE'}. $Lang::tr{'dns check failed'}";
+ if ($cgiparams{'TYPE'} eq 'net') {
+
+ }
}
}
}
if ($cgiparams{'TYPE'} ne 'host') {
unless (&General::validipandmask($cgiparams{'LOCAL_SUBNET'})) {
$errormessage = $Lang::tr{'local subnet is invalid'};
+ if ($cgiparams{'TYPE'} eq 'net') {
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ }
goto VPNCONF_ERROR;}
}
# Check if there is no other entry without IP-address and PSK
}
if (($cgiparams{'TYPE'} eq 'net') && (! &General::validipandmask($cgiparams{'REMOTE_SUBNET'}))) {
$errormessage = $Lang::tr{'remote subnet is invalid'};
- goto VPNCONF_ERROR;
+ unlink ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}/$cgiparams{'NAME'}.conf") or die "Removing Configfile fail: $!";
+ rmdir ("${General::swroot}/ovpn/n2nconf/$cgiparams{'NAME'}") || die "Removing Directory fail: $!";
+ goto VPNCONF_ERROR;
}
if ($cgiparams{'ENABLED'} !~ /^(on|off)$/) {
$confighash{$key}[8] = $cgiparams{'LOCAL_SUBNET'};
$confighash{$key}[10] = $cgiparams{'REMOTE'};
$confighash{$key}[23] = $cgiparams{'MSSFIX'};
- if ($cgiparams{'FRAGMENT'} eq '') {
- $confighash{$key}[24] = '1300';
- } else {
$confighash{$key}[24] = $cgiparams{'FRAGMENT'};
- }
$confighash{$key}[25] = $cgiparams{'REMARK'};
$confighash{$key}[26] = $cgiparams{'INTERFACE'};
# new fields
$confighash{$key}[31] = $cgiparams{'MTU'};
# new fileds
&General::writehasharray("${General::swroot}/ovpn/ovpnconfig", \%confighash);
+
+###
+# m.a.d n2n begin
+###
+
+ if ($cgiparams{'TYPE'} eq 'net') {
+
+ if (-e "/var/run/$confighash{$key}[1]n2n.pid") {
+ system('/usr/local/bin/openvpnctrl', '-kn2n', $confighash{$cgiparams{'KEY'}}[1]);
+
+ &General::readhasharray("${General::swroot}/ovpn/ovpnconfig", \%confighash);
+ my $key = $cgiparams{'KEY'};
+ if (! $key) {
+ $key = &General::findhasharraykey (\%confighash);
+ foreach my $i (0 .. 31) { $confighash{$key}[$i] = "";}
+ }
+ $confighash{$key}[0] = 'on';
+ &General::writehasharray("${General::swroot}/ovpn/ovpnconfig", \%confighash);
+
+ system('/usr/local/bin/openvpnctrl', '-sn2n', $confighash{$cgiparams{'KEY'}}[1]);
+ }
+ }
+
+###
+# m.a.d n2n end
+###
+
if ($cgiparams{'EDIT_ADVANCED'} eq 'on') {
$cgiparams{'KEY'} = $key;
$cgiparams{'ACTION'} = $Lang::tr{'advanced'};
<td width='25%'> </td>
<td width='25%'> </td></tr>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'Act as'}</td>
- <td><select name='SIDE'><option value='server' $selected{'SIDE'}{'server'}>OpenVPN Server</option>
- <option value='client' $selected{'SIDE'}{'client'}>OpenVPN Client</option></select></td>
+ <td><select name='SIDE'><option value='server' $selected{'SIDE'}{'server'}>$Lang::tr{'openvpn server'}</option>
+ <option value='client' $selected{'SIDE'}{'client'}>$Lang::tr{'openvpn client'}</option></select></td>
<td class='boldbase'>$Lang::tr{'remote host/ip'}:</td>
<td><input type='TEXT' name='REMOTE' value='$cgiparams{'REMOTE'}' /></td></tr>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'local subnet'}</td>
<tr><td class='boldbase' nowrap='nowrap'>mssfix <img src='/blob.gif' /></td>
<td><input type='checkbox' name='MSSFIX' $checked{'MSSFIX'}{'on'} /></td>
- <tr><td class='boldbase' nowrap='nowrap'>
Fragment <img src='/blob.gif' /></td>
+ <tr><td class='boldbase' nowrap='nowrap'>
fragment <img src='/blob.gif' /></td>
<td><input type='TEXT' name='FRAGMENT' VALUE='$cgiparams{'FRAGMENT'}'size='5' /></td>
- <td>Default: <span class="base">1300</span></td>
+ <td>$Lang::tr{'openvpn default'}: <span class="base">1300</span></td>
<tr><td class='boldbase' nowrap='nowrap'>$Lang::tr{'MTU'} <img src='/blob.gif' /></td>
<td> <input type='TEXT' name='MTU' VALUE='$cgiparams{'MTU'}'size='5' /></TD>
;
###
-# m.a.d Disbale upload cert for n2n connections
+# m.a.d net2net
###
} else {
}
###
-# m.a.d Disbale upload cert for n2n connections end
+# m.a.d net2net
###
foreach my $country (sort keys %{Countries::countries}) {
print ">$country</option>";
}
###
-# m.a.d Disbale pkcs-password for n2n connections
+# m.a.d net2net
###
if ($cgiparams{'TYPE'} eq 'host') {
}
###
-# m.a.d Disbale pkcs-password for n2n connections end
+# m.a.d net2net
###
;
&Header::closebox();
if ( -f "${General::swroot}/ovpn/ca/cacert.pem" ) {
###
-# m.a.d Client Status Table
+# m.a.d net2net
###
&Header::openbox('100%', 'LEFT', $Lang::tr{'Client status and controlc' });
my $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourred}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsclosed'}</font></b></td></tr></table>";
if ($confighash{$key}[0] eq 'off') {
- $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourblue}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsclosed'}</font></b></td></tr></table>";
+ $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourblue}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'openvpn disabled'}</font></b></td></tr></table>";
} else {
###
-# m.a.d net2net Status
-###
-
- if ($confighash{$cgiparams{'KEY'}}[3] eq 'host'){
-
- my $cn;
- my @match = ();
- foreach my $line (@status) {
+# m.a.d net2net
+###
+
+ if ($confighash{$key}[3] eq 'net') {
+# my @tempovpnsubnet = split("\/",$confighash{$key}[27]);
+# my @ovpnip = split /\./,$tempovpnsubnet[0];
+# my $pingip = "";
+# if ($confighash{$key}[6] eq 'server') {
+# $pingip = "$ovpnip[0].$ovpnip[1].$ovpnip[2].2";
+# } else {
+# $pingip = "$ovpnip[0].$ovpnip[1].$ovpnip[2].1";
+# }
+# my $p = Net::Ping->new("udp",1);
+# if ($p->ping($pingip)) {
+# $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourgreen}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsopen'}</font></b></td></tr></table>";
+# }
+# $p->close();
+
+ if (-e "/var/run/$confighash{$key}[1]n2n.pid") {
+ $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourgreen}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'openvpn enabled'}</font></b></td></tr></table>";
+ }
+ }
+ my $cn;
+ my @match = ();
+ foreach my $line (@status) {
chomp($line);
if ( $line =~ /^(.+),(\d+\.\d+\.\d+\.\d+\:\d+),(\d+),(\d+),(.+)/) {
@match = split(m/^(.+),(\d+\.\d+\.\d+\.\d+\:\d+),(\d+),(\d+),(.+)/, $line);
}
$cn =~ s/[_]/ /g;
if ($cn eq "$confighash{$key}[2]") {
- $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourblue}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsclosed'}</font></b></td></tr></table>";
+ $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourgreen}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsopen'}</font></b></td></tr></table>";
}
- }
- }
- } else {
- my @tempovpnsubnet = split("\/",$confighash{$key}[27]);
- my @ovpnip = split /\./,$tempovpnsubnet[0];
- my $pingip = "";
-
- if ($confighash{$key}[6] eq 'server') {
- $pingip = "$ovpnip[0].$ovpnip[1].$ovpnip[2].2";
- } else {
- $pingip = "$ovpnip[0].$ovpnip[1].$ovpnip[2].1";
- }
-
- my $p = Net::Ping->new("udp",1);
-
- if ($p->ping($pingip)) {
- $active = "<table cellpadding='2' cellspacing='0' bgcolor='${Header::colourgreen}' width='100%'><tr><td align='center'><b><font color='#FFFFFF'>$Lang::tr{'capsopen'}</font></b></td></tr></table>";
- }
- $p->close();
+
- }
}
-
-###
-# m.a.d net2net Status end
-###
+}
+}
my $disable_clientdl = "disabled='disabled'";
projects / people / teissler / ipfire-2.x.git / blobdiff