include/configs: Whitespace fixup

[people/ms/u-boot.git] / include / configs / cm-bf527.h

diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index 3d41bd1b51936edc22862d2266eba037104b05e6..0b31dc95d796762bb5ff500600c757dc51f26949 100644 (file)
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for CM-BF527 board
+ * U-Boot - Configuration file for CM-BF527 board
  */
 
 #ifndef __CONFIG_CM_BF527_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf527-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,6 +36,8 @@
 /* Values can range from 1-15                                          */
 #define CONFIG_SCLK_DIV                        4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_120 | CLKBUFOE | FREQ_1000)
 
 /*
  * Memory Settings
@@ -55,7 +55,6 @@
 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN  (128 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used sametime as ethernet)
@@ -65,11 +64,9 @@
 #define CONFIG_BFIN_NFC_CTL_VAL        0x0033
 #define CONFIG_SYS_NAND_BASE           0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS         1
 #define CONFIG_CMD_NAND
 #endif
 
-
 /*
  * Network Settings
  */
@@ -79,12 +76,8 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                cm-bf527
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -97,7 +90,6 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      67
 
-
 /*
  * Env Storage Settings
  */
@@ -105,18 +97,14 @@
 #define CONFIG_ENV_ADDR                0x20008000
 #define CONFIG_ENV_OFFSET      0x8000
 #define CONFIG_ENV_SIZE                0x8000
-#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_SECT_SIZE   0x8000
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C    1
-#define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * Misc Settings
@@ -125,7 +113,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
-
+#define CONFIG_BOOTCOMMAND     "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+       "flashboot=flread 20040000 1000000 300000;" \
+       "bootm 0x1000000\0"
 
 /*
  * Pull in common ADI header for remaining command/environment setup