]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/dragonboard410c.h
include/configs: drop default definitions of CONFIG_SYS_PBSIZE
[people/ms/u-boot.git] / include / configs / dragonboard410c.h
index cc7ab8365d1ea72579d4ba45e13c21bd9511409b..baebdefc445c9e03297f40c335a487c2b2caff99 100644 (file)
@@ -12,8 +12,6 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
-#define CONFIG_IDENT_STRING            "\nQualcomm-DragonBoard 410C"
-
 #define CONFIG_MISC_INIT_R /* To stop autoboot */
 
 /* Physical Memory Map */
 #define CONFIG_SYS_BOOTM_LEN           0x1000000 /* 16MB max kernel size */
 
 /* UART */
-#define CONFIG_BAUDRATE                        115200
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              19000000
 
-/* This are needed to have proper mmc support */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
-
 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
 
 /* Fixup - in init code we switch from device to host mode,
 #define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_USB_ETHER_SMSC95XX
 
-/* Libraries  */
-#define CONFIG_MD5
-
 /* Extra Commands */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_MD5SUM
 /* Enable that for switching of boot partitions */
 /* Disabled by default as some sub-commands can brick eMMC */
 /*#define CONFIG_SUPPORT_EMMC_BOOT */
-#define CONFIG_CMD_PART
-#define CONFIG_CMD_REGINFO     /* Register dump                */
-#define CONFIG_CMD_TFTP
-#define CONFIG_CMD_UNZIP
 
 /* Partition table support */
 #define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-#define CONFIG_PARTITION_UUIDS
 
 #include <config_distro_defaults.h>
 
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/* Environment - Boot*/
-#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 1) \
@@ -128,18 +106,14 @@ REFLASH(dragonboard/u-boot.img, 8)\
        "pxefile_addr_r=0x90100000\0"\
        BOOTENV
 
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_NO_FLASH
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_8M)
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */