+++ /dev/null
-/*
- * (C) Copyright 2005
- * Thomas.Lange@corelatus.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the gth2 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_GTH2 1
-#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
-
-#define CONFIG_SOC_AU1000 1
-
-#define CONFIG_MISC_INIT_R 1
-
-#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */
-
-#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
-
-#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
-
-#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
-
-#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
-
-#define CONFIG_BAUDRATE 115200
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
-
-/* Only interrupt boot if space is pressed */
-/* If a long serial cable is connected but */
-/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press space to abort autoboot in %d second\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTARGS "panic=1"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "addmisc=setenv bootargs $(bootargs) " \
- "ethaddr=$(ethaddr) \0" \
- "netboot=bootp;run addmisc;bootm\0" \
- ""
-
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_SOURCE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "GTH2 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MHZ 500
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x83000000
-
-#define CONFIG_HW_WATCHDOG 1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
-
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_NOWHERE 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR 0xB0030000
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS 2
-
-
-#define CONFIG_MEMSIZE_IN_BYTES
-
-/*---ATA PCMCIA ------------------------------------*/
-#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
-#define CONFIG_SYS_PCMCIA_IO_BASE 0x28000000
-#define CONFIG_SYS_PCMCIA_ATTR_BASE 0x30000000
-
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_ATAPI 1
-#define CONFIG_MAC_PARTITION 1
-
-/* We run CF in "true ide" mode or a harddrive via pcmcia */
-#define CONFIG_IDE_PCMCIA 1
-
-/* We only support one slot for now */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_IO_BASE
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define GPIO_CACONFIG (1<<0)
-#define GPIO_DPACONFIG (1<<6)
-#define GPIO_ERESET (1<<11)
-#define GPIO_EEDQ (1<<17)
-#define GPIO_WDI (1<<18)
-#define GPIO_RJ1LY (1<<22)
-#define GPIO_RJ1LG (1<<23)
-#define GPIO_LEDCLK (1<<29)
-#define GPIO_LEDD (1<<30)
-#define GPIO_CPU_LED (1<<31)
-
-#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / blobdiff