include/configs: drop default definitions of CONFIG_SYS_MAXARGS

[people/ms/u-boot.git] / include / configs / legoev3.h

diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index f2f82acc993f70e44c8778e1120c7ff1e455dcc6..c27373c56c24ec84b4427c5eca6b861f426a24af 100644 (file)
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -122,7 +122,6 @@
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART1_BASE /* Base address of UART1 */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 #define CONFIG_SPI
 #define CONFIG_DAVINCI_SPI
@@ -142,17 +141,13 @@
 /*
  * U-Boot general configuration
  */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -200,37 +195,17 @@
        "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \
        "bootscript=source ${bootscraddr}\0" \
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SAVES
-
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE                (16 << 10)
 
-/* SD/MMC configuration */
-#define CONFIG_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000
 
 #define CONFIG_SYS_INIT_SP_ADDR                0x80010000
 
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */