bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR

[people/ms/u-boot.git] / include / configs / omap3_igep00x0.h

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 59da726bd6383a0c4a4d292bac46b68b28f03669..76d8e13d52c107d1d5bc79bb062d4d241d894627 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -11,10 +11,8 @@
 #define __IGEP00X0_H
 
 #define CONFIG_NR_DRAM_BANKS            2
-#define CONFIG_NAND
 
 #include <configs/ti_omap3_common.h>
-#include <asm/mach-types.h>
 
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
@@ -27,20 +25,21 @@
 
 #define CONFIG_REVISION_TAG            1
 
-/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-                      (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define RED_LED_GPIO 27
-#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define RED_LED_GPIO 16
-#endif
-#endif
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_2            /* GPIO32..63   is in GPIO bank 2 */
+#define CONFIG_OMAP3_GPIO_4            /* GPIO96..127  is in GPIO bank 4 */
+
+/* TPS65950 */
+#define PBIASLITEVMODE1                        (1 << 8)
 
-/* USB */
-#define CONFIG_USB_MUSB_UDC            1
-#define CONFIG_USB_OMAP3               1
-#define CONFIG_TWL4030_USB             1
+/* LED */
+#define IGEP0020_GPIO_LED              27
+#define IGEP0030_GPIO_LED              16
+
+/* Board and revision detection GPIOs */
+#define IGEP0030_USB_TRANSCEIVER_RESET         54
+#define GPIO_IGEP00X0_BOARD_DETECTION          28
+#define GPIO_IGEP00X0_REVISION_DETECTION       129
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
@@ -52,9 +51,6 @@
 #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME       "IGEP"
 
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_ONENAND
-
 #ifndef CONFIG_SPL_BUILD
 
 /* Environment */
@@ -73,23 +69,29 @@
 
 #include <config_distro_bootcmd.h>
 
+#define ENV_FINDFDT \
+       "findfdt="\
+               "if test ${board_name} = igep0020; then " \
+                       "if test ${board_rev} = F; then " \
+                               "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
+                       "else " \
+                               "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
+               "if test ${board_name} = igep0030; then " \
+                       "if test ${board_rev} = G; then " \
+                               "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
+                       "else " \
+                               "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
+               "if test ${fdtfile} = ''; then " \
+                       "echo WARNING: Could not determine device tree to use; fi; \0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       ENV_FINDFDT \
        ENV_DEVICE_SETTINGS \
        MEM_LAYOUT_SETTINGS \
        BOOTENV
 
 #endif
 
-/*
- * SMSC911x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE            0x2C000000
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_RBTREE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_SYS_MTDPARTS_RUNTIME
 
@@ -99,8 +101,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE  (128*1024)
 
 /* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -117,8 +117,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH
 
 /* UBI configuration */
 #define CONFIG_SPL_UBI                 1
@@ -135,7 +133,6 @@
 #define CONFIG_SPL_UBI_INFO_ADDR       0x88080000
 
 /* environment organization */
-#define CONFIG_ENV_IS_NOWHERE          1
 #define CONFIG_ENV_UBI_PART            "UBI"
 #define CONFIG_ENV_UBI_VOLUME          "config"
 #define CONFIG_ENV_UBI_VOLUME_REDUND   "config_r"