configs: Migrate CONFIG_USB_STORAGE

[people/ms/u-boot.git] / include / configs / platinum.h

diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index 75d459fb9bcf0d84b703cb1b3d17f9e3e03eda25..34ce0869123159cf41dc8d2ccd611f9c27b0370e 100644 (file)
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -22,52 +22,31 @@
  */
 
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FUSE
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_TIME
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
 
 /*
  * Hardware configuration
  */
 
-/* GPIO config */
-#define CONFIG_MXC_GPIO
-
 /* UART config */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE                   UART1_BASE
-#define CONFIG_BAUDRATE                                115200
-#define CONFIG_CONS_INDEX                      1
 
 /* I2C config */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED                   100000
 
 /* MMC config */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR              0
 #define CONFIG_SYS_FSL_USDHC_NUM               1
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
 
 /* Ethernet config */
 #define CONFIG_FEC_MXC
@@ -79,7 +58,6 @@
 /* USB config */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT                    1
 #define CONFIG_MXC_USB_PORTSC                  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS                   0
@@ -119,9 +97,6 @@
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8
 
-/* Fuse support */
-#define CONFIG_MXC_OCOTP
-
 /* Environment in NAND */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (16 << 20)
@@ -148,39 +123,18 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Device tree support */
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_LOADADDR                                0x12000000
-#define CONFIG_SYS_TEXT_BASE                   0x17800000
-
 #define CONFIG_SYS_MEMTEST_START               PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END                 (CONFIG_SYS_MEMTEST_START + \
                                                 PHYS_SDRAM_SIZE - (12 << 20))
 
-#define CONFIG_BOOTDELAY                       3
 #define CONFIG_BOOTCOMMAND                     "run bootubi_scr"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_PREBOOT
 
-#define CONFIG_SYS_CBSIZE                      256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE + \
                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS                     16
-#define CONFIG_SYS_BARGSIZE                    CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR                   CONFIG_LOADADDR
 
 /* MTD/UBI/UBIFS config */
 #define CONFIG_LZO
@@ -200,10 +154,6 @@
                                "512k(res2),512k(res3),-(ubi1)"
 #endif
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * Environment configuration
  */