Convert CONFIG_ENV_IS_IN_FLASH to Kconfig

[people/ms/u-boot.git] / include / configs / pm9261.h

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index acf6d610e7618df09cb5ab285f36fbe0a7898cce..bae5736801c1091e03fc39042f3b2b73a2c77bb2 100644 (file)
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -20,8 +20,6 @@
 #include <asm/hardware.h>
 /* ARM asynchronous clock */
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define MASTER_PLL_DIV         15
 #define MASTER_PLL_MUL         162
 #define MAIN_PLL_DIV           2
@@ -33,7 +31,6 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_TEXT_BASE   0
 
-#define MACH_TYPE_PM9261       1187
 #define CONFIG_MACH_TYPE       MACH_TYPE_PM9261
 
 /* clocks */
@@ -140,7 +137,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -151,24 +147,20 @@
 #define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD                     1
 #define LCD_BPP                                LCD_COLOR8
 #define CONFIG_LCD_LOGO                        1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO                        1
 #define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_SYS_WHITE_ON_BLACK      1
 #define CONFIG_ATMEL_LCD               1
 #define CONFIG_ATMEL_LCD_BGR555                1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIO_PORTC, 12
-#define        CONFIG_GREEN_LED        AT91_PIO_PORTC, 13
-#define        CONFIG_YELLOW_LED       AT91_PIO_PORTC, 15
+#define CONFIG_RED_LED         GPIO_PIN_PC(12)
+#define CONFIG_GREEN_LED       GPIO_PIN_PC(13)
+#define CONFIG_YELLOW_LED      GPIO_PIN_PC(15)
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -181,18 +173,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING                1
-#define CONFIG_CMD_DHCP                1
 #define CONFIG_CMD_NAND                1
-#define CONFIG_CMD_USB         1
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS                   1
@@ -202,7 +183,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT              (5 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000      /* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3    0xD0000000      /* CS3 */
@@ -219,8 +199,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE               (1 << 22)
 /* our CLE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN              AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN             GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN              GPIO_PIN_PA(16)
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI                   1
@@ -243,12 +223,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW                    1
-#define CONFIG_DOS_PARTITION                   1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9261"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE                     1
 
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000
 
@@ -278,7 +256,6 @@
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_OFFSET              0x60000
 #define CONFIG_ENV_OFFSET_REDUND       0x80000
 #define CONFIG_ENV_SIZE                        0x20000         /* 1 sector = 128 kB */
@@ -292,7 +269,6 @@
 
 #elif defined (CONFIG_SYS_USE_FLASH)
 
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_OFFSET      0x40000
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #define        CONFIG_ENV_SIZE         0x10000
@@ -340,9 +316,6 @@
 #error "Undefined memory device"
 #endif
 
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_SYS_PROMPT              "pm9261> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              \