common: Move CONFIG_BOOTARGS to Kconfig

[people/ms/u-boot.git] / include / configs / sama5d2_xplained.h

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 8e7358687a72cd502c9126c0165a832db83db2f9..9ceb91924dd362cf6a80e6aa7deb15f0522f405f 100644 (file)
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -10,9 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 #define CONFIG_MISC_INIT_R
@@ -23,10 +20,10 @@
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x210000
+#define CONFIG_SYS_INIT_SP_ADDR                0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000 /* load address */
@@ -38,24 +35,10 @@
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #endif
 
-/* NAND flash */
-#undef CONFIG_CMD_NAND
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
-
 /* I2C */
 #define AT24MAC_ADDR           0x5c
 #define AT24MAC_REG            0x9a
 
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_MACB_SEARCH_PHY
-
 /* LCD */
 
 #ifdef CONFIG_LCD
@@ -64,7 +47,6 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 #endif
@@ -72,39 +54,32 @@
 #ifdef CONFIG_SYS_USE_MMC
 
 /* bootstrap + u-boot + env in sd card */
-#undef FAT_ENV_DEVICE_AND_PART
 #undef CONFIG_BOOTCOMMAND
 
-#define FAT_ENV_DEVICE_AND_PART        "1"
 #define CONFIG_BOOTCOMMAND     "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \
                                "fatload mmc 1:1 0x22000000 zImage; " \
                                "bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-       "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
 
 #endif
 
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x200000
-#define CONFIG_SPL_MAX_SIZE            0x10000
+#define CONFIG_SPL_MAX_SIZE            0x18000
 #define CONFIG_SPL_BSS_START_ADDR      0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/armv7/u-boot-spl.lds
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
 
 #endif