include/configs: drop default definitions of CONFIG_SYS_MAXARGS

[people/ms/u-boot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index fc70be18df8adb0924148a54e5a7f4aabf0a293b..f4dd11b82d0a6dddab4357ca9f0d2185ed7bfe2a 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -16,9 +16,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-#define CONFIG_OMAP                    /* in a TI OMAP core */
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_TRICORDER
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
@@ -49,14 +46,6 @@
 
 /* Hardware drivers */
 
-/* GPIO support */
-#define CONFIG_OMAP_GPIO
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2            /* GPIO32..63 are in GPIO bank 2 */
-
-/* LED support */
-
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
@@ -73,16 +62,13 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
-#define CONFIG_SYS_I2C_OMAP34XX
  
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_EEPROM_BUS_NUM      1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
@@ -106,21 +92,10 @@
                                                        /* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_BCH
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 
-/* commands to include */
-#define CONFIG_CMD_MTDPARTS            /* Enable MTD parts commands */
-#define CONFIG_CMD_NAND                        /* NAND support */
-#define CONFIG_CMD_NAND_LOCK_UNLOCK    /* nand (un)lock commands */
-#define CONFIG_CMD_UBIFS               /* UBIFS commands */
-#define CONFIG_LZO                     /* LZO is needed for UBIFS */
-
-#undef CONFIG_CMD_JFFS2                        /* JFFS2 Support */
-
 /* needed for ubi */
-#define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 
@@ -167,9 +142,6 @@
  * which will not be influenced by any data already on the device.
  */
 #ifdef CONFIG_FLASHCARD
-
-#define CONFIG_ENV_IS_NOWHERE
-
 /* the rdaddr is 16 MiB before the loadaddr */
 #define CONFIG_ENV_RDADDR      "rdaddr=0x81000000\0"
 
@@ -190,8 +162,6 @@
 
 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
 
-#define CONFIG_ENV_IS_IN_NAND
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        CONFIG_COMMON_ENV_SETTINGS \
        "mmcargs=" \
@@ -240,10 +210,6 @@
 #define CONFIG_CMDLINE_EDITING         /* enable cmdline history */
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
@@ -285,11 +251,9 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1